Commit 18eab855 authored by Venkatesh Pallipadi's avatar Venkatesh Pallipadi Committed by Len Brown

ACPI: Enable C3 even when PM2_control is zero

On systems that do not have pm2_control_block, we cannot really use
ARB_DISABLE before C3. We used to disable C3 totally on such systems.

To be compatible with Windows, we need to enable C3 on such systems now.
We just skip ARB_DISABLE step before entering the C3-state and assume
hardware is handling things correctly. Also, ACPI spec is not clear
about pm2_control is _needed_ for C3 or not.

We have atleast one system that need this to enable C3.
Signed-off-by: default avatarVenkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: default avatarLen Brown <len.brown@intel.com>
parent 33ce2033
......@@ -488,7 +488,17 @@ static void acpi_processor_idle(void)
case ACPI_STATE_C3:
if (pr->flags.bm_check) {
/*
* disable bus master
* bm_check implies we need ARB_DIS
* !bm_check implies we need cache flush
* bm_control implies whether we can do ARB_DIS
*
* That leaves a case where bm_check is set and bm_control is
* not set. In that case we cannot do much, we enter C3
* without doing anything.
*/
if (pr->flags.bm_check && pr->flags.bm_control) {
if (atomic_inc_return(&c3_cpu_count) ==
num_online_cpus()) {
/*
......@@ -497,7 +507,7 @@ static void acpi_processor_idle(void)
*/
acpi_set_register(ACPI_BITREG_ARB_DISABLE, 1);
}
} else {
} else if (!pr->flags.bm_check) {
/* SMP with no shared cache... Invalidate cache */
ACPI_FLUSH_CPU_CACHE();
}
......@@ -509,7 +519,7 @@ static void acpi_processor_idle(void)
acpi_cstate_enter(cx);
/* Get end time (ticks) */
t2 = inl(acpi_gbl_FADT.xpm_timer_block.address);
if (pr->flags.bm_check) {
if (pr->flags.bm_check && pr->flags.bm_control) {
/* Enable bus master arbitration */
atomic_dec(&c3_cpu_count);
acpi_set_register(ACPI_BITREG_ARB_DISABLE, 0);
......@@ -959,9 +969,9 @@ static void acpi_processor_power_verify_c3(struct acpi_processor *pr,
if (pr->flags.bm_check) {
/* bus mastering control is necessary */
if (!pr->flags.bm_control) {
/* In this case we enter C3 without bus mastering */
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"C3 support requires bus mastering control\n"));
return;
"C3 support without bus mastering control\n"));
}
} else {
/*
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment