mmc: host: Fix repeated words in comments

Delete the redundant word 'the'.
Signed-off-by: wangjianli <wangjianli@cdjrlc.com>
Link: https://lore.kernel.org/r/20221022062237.10333-1-wangjianli@cdjrlc.com
Link: https://lore.kernel.org/r/20221022062331.11395-1-wangjianli@cdjrlc.com
Link: https://lore.kernel.org/r/20221022062505.13155-1-wangjianli@cdjrlc.comSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

drivers/mmc/host/dw_mmc.c

@@ -1363,7 +1363,7 @@ static void __dw_mci_start_request(struct dw_mci *host,
 		 * is just about to roll over.
 		 *
 		 * We do this whole thing under spinlock and only if the
-		 * command hasn't already completed (indicating the the irq
+		 * command hasn't already completed (indicating the irq
 		 * already ran so we don't want the timeout).
 		 */
 		spin_lock_irqsave(&host->irq_lock, irqflags);

drivers/mmc/host/sdhci-acpi.c

@@ -648,7 +648,7 @@ static int sdhci_acpi_emmc_amd_probe_slot(struct platform_device *pdev,
 	 *       in reading a garbage value and using the wrong presets.
 	 *
 	 *       Since HS400 and HS200 presets must be identical, we could
-	 *       instead use the the SDR104 preset register.
+	 *       instead use the SDR104 preset register.
 	 *
 	 *    If the above issues are resolved we could remove this quirk for
 	 *    firmware that that has valid presets (i.e., SDR12 <= 12 MHz).

drivers/mmc/host/sdhci-esdhc-imx.c

@@ -1455,7 +1455,7 @@ static void sdhci_esdhc_imx_hwinit(struct sdhci_host *host)
 
 		/*
 		 * On i.MX8MM, we are running Dual Linux OS, with 1st Linux using SD Card
-		 * as rootfs storage, 2nd Linux using eMMC as rootfs storage. We let the
+		 * as rootfs storage, 2nd Linux using eMMC as rootfs storage. We let
 		 * the 1st linux configure power/clock for the 2nd Linux.
 		 *
 		 * When the 2nd Linux is booting into rootfs stage, we let the 1st Linux