Skip to content

L
linux
Commit 1b00767f authored by Thomas Bogendoerfer's avatar Thomas Bogendoerfer
Browse files
Options

MIPS: Remove PMC MSP71xx platform 

No (active) developer owns this hardware, so let's remove Linux support.
Signed-off-by: default avatarThomas Bogendoerfer <tsbogend@alpha.franken.de>
parent 10760dde
Hide whitespace changes
Inline Side-by-side
Showing with 0 additions and 5578 deletions
arch/mips/Kbuild.platforms
View file @ 1b00767f
......@@ -24,7 +24,6 @@ platforms += netlogic
platforms += paravirt
platforms += pic32
platforms += pistachio
platforms += pmcs-msp71xx
platforms += pnx833x
platforms += ralink
platforms += rb532
......
arch/mips/Kconfig
View file @ 1b00767f
......@@ -608,30 +608,6 @@ config NXP_STB225
help
Support for NXP Semiconductors STB225 Development Board.
config PMC_MSP
bool "PMC-Sierra MSP chipsets"
select CEVT_R4K
select CSRC_R4K
select DMA_NONCOHERENT
select SWAP_IO_SPACE
select NO_EXCEPT_FILL
select BOOT_RAW
select SYS_HAS_CPU_MIPS32_R1
select SYS_HAS_CPU_MIPS32_R2
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_MIPS16
select IRQ_MIPS_CPU
select SERIAL_8250
select SERIAL_8250_CONSOLE
select USB_EHCI_BIG_ENDIAN_MMIO
select USB_EHCI_BIG_ENDIAN_DESC
help
This adds support for the PMC-Sierra family of Multi-Service
Processor System-On-A-Chips. These parts include a number
of integrated peripherals, interfaces and DSPs in addition to
a variety of MIPS cores.
config RALINK
bool "Ralink based machines"
select CEVT_R4K
......@@ -1076,7 +1052,6 @@ source "arch/mips/jz4740/Kconfig"
source "arch/mips/lantiq/Kconfig"
source "arch/mips/pic32/Kconfig"
source "arch/mips/pistachio/Kconfig"
source "arch/mips/pmcs-msp71xx/Kconfig"
source "arch/mips/ralink/Kconfig"
source "arch/mips/sgi-ip27/Kconfig"
source "arch/mips/sibyte/Kconfig"
......
arch/mips/configs/msp71xx_defconfig deleted 100644 → 0
View file @ 10760dde
CONFIG_LOCALVERSION="-pmc"
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_PREEMPT=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_EXPERT=y
# CONFIG_SHMEM is not set
CONFIG_SLAB=y
CONFIG_PMC_MSP=y
CONFIG_PMC_MSP7120_GW=y
CONFIG_CPU_MIPS32_R2=y
CONFIG_NR_CPUS=2
CONFIG_PCI=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_NET=y
CONFIG_UNIX=y
CONFIG_XFRM_USER=y
CONFIG_NET_KEY=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
CONFIG_INET_IPCOMP=y
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
CONFIG_BRIDGE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FW_LOADER is not set
CONFIG_MTD=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_RAM=y
CONFIG_MTD_PMC_MSP_EVM=y
CONFIG_BLK_DEV_RAM=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
CONFIG_PPP=y
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
# CONFIG_VT is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_SERIAL_8250_PCI is not set
CONFIG_SERIAL_8250_NR_UARTS=2
CONFIG_SERIAL_8250_RUNTIME_UARTS=2
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_PMCMSP=y
# CONFIG_USB_HID is not set
CONFIG_USB=y
CONFIG_USB_MON=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_STORAGE=y
CONFIG_EXT2_FS=y
# CONFIG_DNOTIFY is not set
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_JFFS2_FS=y
CONFIG_SQUASHFS=y
CONFIG_SQUASHFS_EMBEDDED=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
CONFIG_MAGIC_SYSRQ=y
arch/mips/include/asm/bootinfo.h
View file @ 1b00767f
......@@ -41,17 +41,6 @@
#define MACH_DS5800 9 /* DECsystem 5800 */
#define MACH_DS5900 10 /* DECsystem 5900 */
/*
* Valid machtype for group PMC-MSP
*/
#define MACH_MSP4200_EVAL 0 /* PMC-Sierra MSP4200 Evaluation */
#define MACH_MSP4200_GW 1 /* PMC-Sierra MSP4200 Gateway demo */
#define MACH_MSP4200_FPGA 2 /* PMC-Sierra MSP4200 Emulation */
#define MACH_MSP7120_EVAL 3 /* PMC-Sierra MSP7120 Evaluation */
#define MACH_MSP7120_GW 4 /* PMC-Sierra MSP7120 Residential GW */
#define MACH_MSP7120_FPGA 5 /* PMC-Sierra MSP7120 Emulation */
#define MACH_MSP_OTHER 255 /* PMC-Sierra unknown board type */
/*
* Valid machtype for group Mikrotik
*/
......
arch/mips/include/asm/mach-pmcs-msp71xx/cpu-feature-overrides.h deleted 100644 → 0
View file @ 10760dde
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2003, 04, 07 Ralf Baechle (ralf@linux-mips.org)
*/
#ifndef __ASM_MACH_MSP71XX_CPU_FEATURE_OVERRIDES_H
#define __ASM_MACH_MSP71XX_CPU_FEATURE_OVERRIDES_H
#define cpu_has_mips16 1
#define cpu_has_dsp 1
/* #define cpu_has_dsp2 ??? - do runtime detection */
#define cpu_has_mipsmt 1
#define cpu_has_fpu 0
#define cpu_has_mips32r1 0
#define cpu_has_mips32r2 1
#define cpu_has_mips64r1 0
#define cpu_has_mips64r2 0
#endif /* __ASM_MACH_MSP71XX_CPU_FEATURE_OVERRIDES_H */
arch/mips/include/asm/mach-pmcs-msp71xx/msp_cic_int.h deleted 100644 → 0
View file @ 10760dde
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Defines for the MSP interrupt controller.
*
* Copyright (C) 1999 MIPS Technologies, Inc. All rights reserved.
* Author: Carsten Langgaard, carstenl@mips.com
*
* ########################################################################
*
* ########################################################################
*/
#ifndef _MSP_CIC_INT_H
#define _MSP_CIC_INT_H
/*
* The PMC-Sierra CIC interrupts are all centrally managed by the
* CIC sub-system.
* We attempt to keep the interrupt numbers as consistent as possible
* across all of the MSP devices, but some differences will creep in ...
* The interrupts which are directly forwarded to the MIPS core interrupts
* are assigned interrupts in the range 0-7, interrupts cascaded through
* the CIC are assigned interrupts 8-39. The cascade occurs on C_IRQ4
* (MSP_INT_CIC). Currently we don't really distinguish between VPE1
* and VPE0 (or thread contexts for that matter). Will have to fix.
* The PER interrupts are assigned interrupts in the range 40-71.
*/
/*
* IRQs directly forwarded to the CPU
*/
#define MSP_MIPS_INTBASE 0
#define MSP_INT_SW0 0 /* IRQ for swint0, C_SW0 */
#define MSP_INT_SW1 1 /* IRQ for swint1, C_SW1 */
#define MSP_INT_MAC0 2 /* IRQ for MAC 0, C_IRQ0 */
#define MSP_INT_MAC1 3 /* IRQ for MAC 1, C_IRQ1 */
#define MSP_INT_USB 4 /* IRQ for USB, C_IRQ2 */
#define MSP_INT_SAR 5 /* IRQ for ADSL2+ SAR, C_IRQ3 */
#define MSP_INT_CIC 6 /* IRQ for CIC block, C_IRQ4 */
#define MSP_INT_SEC 7 /* IRQ for Sec engine, C_IRQ5 */
/*
* IRQs cascaded on CPU interrupt 4 (CAUSE bit 12, C_IRQ4)
* These defines should be tied to the register definitions for the CIC
* interrupt routine. For now, just use hard-coded values.
*/
#define MSP_CIC_INTBASE (MSP_MIPS_INTBASE + 8)
#define MSP_INT_EXT0 (MSP_CIC_INTBASE + 0)
/* External interrupt 0 */
#define MSP_INT_EXT1 (MSP_CIC_INTBASE + 1)
/* External interrupt 1 */
#define MSP_INT_EXT2 (MSP_CIC_INTBASE + 2)
/* External interrupt 2 */
#define MSP_INT_EXT3 (MSP_CIC_INTBASE + 3)
/* External interrupt 3 */
#define MSP_INT_CPUIF (MSP_CIC_INTBASE + 4)
/* CPU interface interrupt */
#define MSP_INT_EXT4 (MSP_CIC_INTBASE + 5)
/* External interrupt 4 */
#define MSP_INT_CIC_USB (MSP_CIC_INTBASE + 6)
/* Cascaded IRQ for USB */
#define MSP_INT_MBOX (MSP_CIC_INTBASE + 7)
/* Sec engine mailbox IRQ */
#define MSP_INT_EXT5 (MSP_CIC_INTBASE + 8)
/* External interrupt 5 */
#define MSP_INT_TDM (MSP_CIC_INTBASE + 9)
/* TDM interrupt */
#define MSP_INT_CIC_MAC0 (MSP_CIC_INTBASE + 10)
/* Cascaded IRQ for MAC 0 */
#define MSP_INT_CIC_MAC1 (MSP_CIC_INTBASE + 11)
/* Cascaded IRQ for MAC 1 */
#define MSP_INT_CIC_SEC (MSP_CIC_INTBASE + 12)
/* Cascaded IRQ for sec engine */
#define MSP_INT_PER (MSP_CIC_INTBASE + 13)
/* Peripheral interrupt */
#define MSP_INT_TIMER0 (MSP_CIC_INTBASE + 14)
/* SLP timer 0 */
#define MSP_INT_TIMER1 (MSP_CIC_INTBASE + 15)
/* SLP timer 1 */
#define MSP_INT_TIMER2 (MSP_CIC_INTBASE + 16)
/* SLP timer 2 */
#define MSP_INT_VPE0_TIMER (MSP_CIC_INTBASE + 17)
/* VPE0 MIPS timer */
#define MSP_INT_BLKCP (MSP_CIC_INTBASE + 18)
/* Block Copy */
#define MSP_INT_UART0 (MSP_CIC_INTBASE + 19)
/* UART 0 */
#define MSP_INT_PCI (MSP_CIC_INTBASE + 20)
/* PCI subsystem */
#define MSP_INT_EXT6 (MSP_CIC_INTBASE + 21)
/* External interrupt 5 */
#define MSP_INT_PCI_MSI (MSP_CIC_INTBASE + 22)
/* PCI Message Signal */
#define MSP_INT_CIC_SAR (MSP_CIC_INTBASE + 23)
/* Cascaded ADSL2+ SAR IRQ */
#define MSP_INT_DSL (MSP_CIC_INTBASE + 24)
/* ADSL2+ IRQ */
#define MSP_INT_CIC_ERR (MSP_CIC_INTBASE + 25)
/* SLP error condition */
#define MSP_INT_VPE1_TIMER (MSP_CIC_INTBASE + 26)
/* VPE1 MIPS timer */
#define MSP_INT_VPE0_PC (MSP_CIC_INTBASE + 27)
/* VPE0 Performance counter */
#define MSP_INT_VPE1_PC (MSP_CIC_INTBASE + 28)
/* VPE1 Performance counter */
#define MSP_INT_EXT7 (MSP_CIC_INTBASE + 29)
/* External interrupt 5 */
#define MSP_INT_VPE0_SW (MSP_CIC_INTBASE + 30)
/* VPE0 Software interrupt */
#define MSP_INT_VPE1_SW (MSP_CIC_INTBASE + 31)
/* VPE0 Software interrupt */
/*
* IRQs cascaded on CIC PER interrupt (MSP_INT_PER)
*/
#define MSP_PER_INTBASE (MSP_CIC_INTBASE + 32)
/* Reserved 0-1 */
#define MSP_INT_UART1 (MSP_PER_INTBASE + 2)
/* UART 1 */
/* Reserved 3-5 */
#define MSP_INT_2WIRE (MSP_PER_INTBASE + 6)
/* 2-wire */
#define MSP_INT_TM0 (MSP_PER_INTBASE + 7)
/* Peripheral timer block out 0 */
#define MSP_INT_TM1 (MSP_PER_INTBASE + 8)
/* Peripheral timer block out 1 */
/* Reserved 9 */
#define MSP_INT_SPRX (MSP_PER_INTBASE + 10)
/* SPI RX complete */
#define MSP_INT_SPTX (MSP_PER_INTBASE + 11)
/* SPI TX complete */
#define MSP_INT_GPIO (MSP_PER_INTBASE + 12)
/* GPIO */
#define MSP_INT_PER_ERR (MSP_PER_INTBASE + 13)
/* Peripheral error */
/* Reserved 14-31 */
#endif /* !_MSP_CIC_INT_H */
arch/mips/include/asm/mach-pmcs-msp71xx/msp_gpio_macros.h deleted 100644 → 0
View file @ 10760dde
/*
*
* Macros for external SMP-safe access to the PMC MSP71xx reference
* board GPIO pins
*
* Copyright 2010 PMC-Sierra, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#ifndef __MSP_GPIO_MACROS_H__
#define __MSP_GPIO_MACROS_H__
#include <msp_regops.h>
#include <msp_regs.h>
#ifdef CONFIG_PMC_MSP7120_GW
#define MSP_NUM_GPIOS 20
#else
#define MSP_NUM_GPIOS 28
#endif
/* -- GPIO Enumerations -- */
enum msp_gpio_data {
MSP_GPIO_LO = 0,
MSP_GPIO_HI = 1,
MSP_GPIO_NONE, /* Special - Means pin is out of range */
MSP_GPIO_TOGGLE, /* Special - Sets pin to opposite */
};
enum msp_gpio_mode {
MSP_GPIO_INPUT = 0x0,
/* MSP_GPIO_ INTERRUPT = 0x1, Not supported yet */
MSP_GPIO_UART_INPUT = 0x2, /* Only GPIO 4 or 5 */
MSP_GPIO_OUTPUT = 0x8,
MSP_GPIO_UART_OUTPUT = 0x9, /* Only GPIO 2 or 3 */
MSP_GPIO_PERIF_TIMERA = 0x9, /* Only GPIO 0 or 1 */
MSP_GPIO_PERIF_TIMERB = 0xa, /* Only GPIO 0 or 1 */
MSP_GPIO_UNKNOWN = 0xb, /* No such GPIO or mode */
};
/* -- Static Tables -- */
/* Maps pins to data register */
static volatile u32 * const MSP_GPIO_DATA_REGISTER[] = {
/* GPIO 0 and 1 on the first register */
GPIO_DATA1_REG, GPIO_DATA1_REG,
/* GPIO 2, 3, 4, and 5 on the second register */
GPIO_DATA2_REG, GPIO_DATA2_REG, GPIO_DATA2_REG, GPIO_DATA2_REG,
/* GPIO 6, 7, 8, and 9 on the third register */
GPIO_DATA3_REG, GPIO_DATA3_REG, GPIO_DATA3_REG, GPIO_DATA3_REG,
/* GPIO 10, 11, 12, 13, 14, and 15 on the fourth register */
GPIO_DATA4_REG, GPIO_DATA4_REG, GPIO_DATA4_REG, GPIO_DATA4_REG,
GPIO_DATA4_REG, GPIO_DATA4_REG,
/* GPIO 16 - 23 on the first strange EXTENDED register */
EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG,
EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG,
EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG,
/* GPIO 24 - 27 on the second strange EXTENDED register */
EXTENDED_GPIO2_REG, EXTENDED_GPIO2_REG, EXTENDED_GPIO2_REG,
EXTENDED_GPIO2_REG,
};
/* Maps pins to mode register */
static volatile u32 * const MSP_GPIO_MODE_REGISTER[] = {
/* GPIO 0 and 1 on the first register */
GPIO_CFG1_REG, GPIO_CFG1_REG,
/* GPIO 2, 3, 4, and 5 on the second register */
GPIO_CFG2_REG, GPIO_CFG2_REG, GPIO_CFG2_REG, GPIO_CFG2_REG,
/* GPIO 6, 7, 8, and 9 on the third register */
GPIO_CFG3_REG, GPIO_CFG3_REG, GPIO_CFG3_REG, GPIO_CFG3_REG,
/* GPIO 10, 11, 12, 13, 14, and 15 on the fourth register */
GPIO_CFG4_REG, GPIO_CFG4_REG, GPIO_CFG4_REG, GPIO_CFG4_REG,
GPIO_CFG4_REG, GPIO_CFG4_REG,
/* GPIO 16 - 23 on the first strange EXTENDED register */
EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG,
EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG,
EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG,
/* GPIO 24 - 27 on the second strange EXTENDED register */
EXTENDED_GPIO2_REG, EXTENDED_GPIO2_REG, EXTENDED_GPIO2_REG,
EXTENDED_GPIO2_REG,
};
/* Maps 'basic' pins to relative offset from 0 per register */
static int MSP_GPIO_OFFSET[] = {
/* GPIO 0 and 1 on the first register */
0, 0,
/* GPIO 2, 3, 4, and 5 on the second register */
2, 2, 2, 2,
/* GPIO 6, 7, 8, and 9 on the third register */
6, 6, 6, 6,
/* GPIO 10, 11, 12, 13, 14, and 15 on the fourth register */
10, 10, 10, 10, 10, 10,
};
/* Maps MODE to allowed pin mask */
static unsigned int MSP_GPIO_MODE_ALLOWED[] = {
0xffffffff, /* Mode 0 - INPUT */
0x00000, /* Mode 1 - INTERRUPT */
0x00030, /* Mode 2 - UART_INPUT (GPIO 4, 5)*/
0, 0, 0, 0, 0, /* Modes 3, 4, 5, 6, and 7 are reserved */
0xffffffff, /* Mode 8 - OUTPUT */
0x0000f, /* Mode 9 - UART_OUTPUT/
PERF_TIMERA (GPIO 0, 1, 2, 3) */
0x00003, /* Mode a - PERF_TIMERB (GPIO 0, 1) */
0x00000, /* Mode b - Not really a mode! */
};
/* -- Bit masks -- */
/* This gives you the 'register relative offset gpio' number */
#define OFFSET_GPIO_NUMBER(gpio) (gpio - MSP_GPIO_OFFSET[gpio])
/* These take the 'register relative offset gpio' number */
#define BASIC_DATA_REG_MASK(ogpio) (1 << ogpio)
#define BASIC_MODE_REG_VALUE(mode, ogpio) \
(mode << BASIC_MODE_REG_SHIFT(ogpio))
#define BASIC_MODE_REG_MASK(ogpio) \
BASIC_MODE_REG_VALUE(0xf, ogpio)
#define BASIC_MODE_REG_SHIFT(ogpio) (ogpio * 4)
#define BASIC_MODE_REG_FROM_REG(data, ogpio) \
((data & BASIC_MODE_REG_MASK(ogpio)) >> BASIC_MODE_REG_SHIFT(ogpio))
/* These take the actual GPIO number (0 through 15) */
#define BASIC_DATA_MASK(gpio) \
BASIC_DATA_REG_MASK(OFFSET_GPIO_NUMBER(gpio))
#define BASIC_MODE_MASK(gpio) \
BASIC_MODE_REG_MASK(OFFSET_GPIO_NUMBER(gpio))
#define BASIC_MODE(mode, gpio) \
BASIC_MODE_REG_VALUE(mode, OFFSET_GPIO_NUMBER(gpio))
#define BASIC_MODE_SHIFT(gpio) \
BASIC_MODE_REG_SHIFT(OFFSET_GPIO_NUMBER(gpio))
#define BASIC_MODE_FROM_REG(data, gpio) \
BASIC_MODE_REG_FROM_REG(data, OFFSET_GPIO_NUMBER(gpio))
/*
* Each extended GPIO register is 32 bits long and is responsible for up to
* eight GPIOs. The least significant 16 bits contain the set and clear bit
* pair for each of the GPIOs. The most significant 16 bits contain the
* disable and enable bit pair for each of the GPIOs. For example, the
* extended GPIO reg for GPIOs 16-23 is as follows:
*
* 31: GPIO23_DISABLE
* ...
* 19: GPIO17_DISABLE
* 18: GPIO17_ENABLE
* 17: GPIO16_DISABLE
* 16: GPIO16_ENABLE
* ...
* 3: GPIO17_SET
* 2: GPIO17_CLEAR
* 1: GPIO16_SET
* 0: GPIO16_CLEAR
*/
/* This gives the 'register relative offset gpio' number */
#define EXTENDED_OFFSET_GPIO(gpio) (gpio < 24 ? gpio - 16 : gpio - 24)
/* These take the 'register relative offset gpio' number */
#define EXTENDED_REG_DISABLE(ogpio) (0x2 << ((ogpio * 2) + 16))
#define EXTENDED_REG_ENABLE(ogpio) (0x1 << ((ogpio * 2) + 16))
#define EXTENDED_REG_SET(ogpio) (0x2 << (ogpio * 2))
#define EXTENDED_REG_CLR(ogpio) (0x1 << (ogpio * 2))
/* These take the actual GPIO number (16 through 27) */
#define EXTENDED_DISABLE(gpio) \
EXTENDED_REG_DISABLE(EXTENDED_OFFSET_GPIO(gpio))
#define EXTENDED_ENABLE(gpio) \
EXTENDED_REG_ENABLE(EXTENDED_OFFSET_GPIO(gpio))
#define EXTENDED_SET(gpio) \
EXTENDED_REG_SET(EXTENDED_OFFSET_GPIO(gpio))
#define EXTENDED_CLR(gpio) \
EXTENDED_REG_CLR(EXTENDED_OFFSET_GPIO(gpio))
#define EXTENDED_FULL_MASK (0xffffffff)
/* -- API inline-functions -- */
/*
* Gets the current value of the specified pin
*/
static inline enum msp_gpio_data msp_gpio_pin_get(unsigned int gpio)
{
u32 pinhi_mask = 0, pinhi_mask2 = 0;
if (gpio >= MSP_NUM_GPIOS)
return MSP_GPIO_NONE;
if (gpio < 16) {
pinhi_mask = BASIC_DATA_MASK(gpio);
} else {
/*
* Two cases are possible with the EXTENDED register:
* - In output mode (ENABLED flag set), check the CLR bit
* - In input mode (ENABLED flag not set), check the SET bit
*/
pinhi_mask = EXTENDED_ENABLE(gpio) | EXTENDED_CLR(gpio);
pinhi_mask2 = EXTENDED_SET(gpio);
}
if (((*MSP_GPIO_DATA_REGISTER[gpio] & pinhi_mask) == pinhi_mask) ||
(*MSP_GPIO_DATA_REGISTER[gpio] & pinhi_mask2))
return MSP_GPIO_HI;
else
return MSP_GPIO_LO;
}
/* Sets the specified pin to the specified value */
static inline void msp_gpio_pin_set(enum msp_gpio_data data, unsigned int gpio)
{
if (gpio >= MSP_NUM_GPIOS)
return;
if (gpio < 16) {
if (data == MSP_GPIO_TOGGLE)
toggle_reg32(MSP_GPIO_DATA_REGISTER[gpio],
BASIC_DATA_MASK(gpio));
else if (data == MSP_GPIO_HI)
set_reg32(MSP_GPIO_DATA_REGISTER[gpio],
BASIC_DATA_MASK(gpio));
else
clear_reg32(MSP_GPIO_DATA_REGISTER[gpio],
BASIC_DATA_MASK(gpio));
} else {
if (data == MSP_GPIO_TOGGLE) {
/* Special ugly case:
* We have to read the CLR bit.
* If set, we write the CLR bit.
* If not, we write the SET bit.
*/
u32 tmpdata;
custom_read_reg32(MSP_GPIO_DATA_REGISTER[gpio],
tmpdata);
if (tmpdata & EXTENDED_CLR(gpio))
tmpdata = EXTENDED_CLR(gpio);
else
tmpdata = EXTENDED_SET(gpio);
custom_write_reg32(MSP_GPIO_DATA_REGISTER[gpio],
tmpdata);
} else {
u32 newdata;
if (data == MSP_GPIO_HI)
newdata = EXTENDED_SET(gpio);
else
newdata = EXTENDED_CLR(gpio);
set_value_reg32(MSP_GPIO_DATA_REGISTER[gpio],
EXTENDED_FULL_MASK, newdata);
}
}
}
/* Sets the specified pin to the specified value */
static inline void msp_gpio_pin_hi(unsigned int gpio)
{
msp_gpio_pin_set(MSP_GPIO_HI, gpio);
}
/* Sets the specified pin to the specified value */
static inline void msp_gpio_pin_lo(unsigned int gpio)
{
msp_gpio_pin_set(MSP_GPIO_LO, gpio);
}
/* Sets the specified pin to the opposite value */
static inline void msp_gpio_pin_toggle(unsigned int gpio)
{
msp_gpio_pin_set(MSP_GPIO_TOGGLE, gpio);
}
/* Gets the mode of the specified pin */
static inline enum msp_gpio_mode msp_gpio_pin_get_mode(unsigned int gpio)
{
enum msp_gpio_mode retval = MSP_GPIO_UNKNOWN;
uint32_t data;
if (gpio >= MSP_NUM_GPIOS)
return retval;
data = *MSP_GPIO_MODE_REGISTER[gpio];
if (gpio < 16) {
retval = BASIC_MODE_FROM_REG(data, gpio);
} else {
/* Extended pins can only be either INPUT or OUTPUT */
if (data & EXTENDED_ENABLE(gpio))
retval = MSP_GPIO_OUTPUT;
else
retval = MSP_GPIO_INPUT;
}
return retval;
}
/*
* Sets the specified mode on the requested pin
* Returns 0 on success, or -1 if that mode is not allowed on this pin
*/
static inline int msp_gpio_pin_mode(enum msp_gpio_mode mode, unsigned int gpio)
{
u32 modemask, newmode;
if ((1 << gpio) & ~MSP_GPIO_MODE_ALLOWED[mode])
return -1;
if (gpio >= MSP_NUM_GPIOS)
return -1;
if (gpio < 16) {
modemask = BASIC_MODE_MASK(gpio);
newmode = BASIC_MODE(mode, gpio);
} else {
modemask = EXTENDED_FULL_MASK;
if (mode == MSP_GPIO_INPUT)
newmode = EXTENDED_DISABLE(gpio);
else
newmode = EXTENDED_ENABLE(gpio);
}
/* Do the set atomically */
set_value_reg32(MSP_GPIO_MODE_REGISTER[gpio], modemask, newmode);
return 0;
}
#endif /* __MSP_GPIO_MACROS_H__ */
arch/mips/include/asm/mach-pmcs-msp71xx/msp_int.h deleted 100644 → 0
View file @ 10760dde
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Defines for the MSP interrupt handlers.
*
* Copyright (C) 2005, PMC-Sierra, Inc. All rights reserved.
* Author: Andrew Hughes, Andrew_Hughes@pmc-sierra.com
*
* ########################################################################
*
* ########################################################################
*/
#ifndef _MSP_INT_H
#define _MSP_INT_H
/*
* The PMC-Sierra MSP product line has at least two different interrupt
* controllers, the SLP register based scheme and the CIC interrupt
* controller block mechanism. This file distinguishes between them
* so that devices see a uniform interface.
*/
#if defined(CONFIG_IRQ_MSP_SLP)
#include "msp_slp_int.h"
#elif defined(CONFIG_IRQ_MSP_CIC)
#include "msp_cic_int.h"
#else
#error "What sort of interrupt controller does *your* MSP have?"
#endif
#endif /* !_MSP_INT_H */
arch/mips/include/asm/mach-pmcs-msp71xx/msp_pci.h deleted 100644 → 0
View file @ 10760dde
/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
* Copyright (c) 2000-2006 PMC-Sierra INC.
*
* PMC-SIERRA INC. DISCLAIMS ANY LIABILITY OF ANY KIND
* FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS
* SOFTWARE.
*/
#ifndef _MSP_PCI_H_
#define _MSP_PCI_H_
#define MSP_HAS_PCI(ID) (((u32)(ID) <= 0x4236) && ((u32)(ID) >= 0x4220))
/*
* It is convenient to program the OATRAN register so that
* Athena virtual address space and PCI address space are
* the same. This is not a requirement, just a convenience.
*
* The only hard restrictions on the value of OATRAN is that
* OATRAN must not be programmed to allow translated memory
* addresses to fall within the lowest 512MB of
* PCI address space. This region is hardcoded
* for use as Athena PCI Host Controller target
* access memory space to the Athena's SDRAM.
*
* Note that OATRAN applies only to memory accesses, not
* to I/O accesses.
*
* To program OATRAN to make Athena virtual address space
* and PCI address space have the same values, OATRAN
* is to be programmed to 0xB8000000. The top seven
* bits of the value mimic the seven bits clipped off
* by the PCI Host controller.
*
* With OATRAN at the said value, when the CPU does
* an access to its virtual address at, say 0xB900_5000,
* the address appearing on the PCI bus will be
* 0xB900_5000.
* - Michael Penner
*/
#define MSP_PCI_OATRAN 0xB8000000UL
#define MSP_PCI_SPACE_BASE (MSP_PCI_OATRAN + 0x1002000UL)
#define MSP_PCI_SPACE_SIZE (0x3000000UL - 0x2000)
#define MSP_PCI_SPACE_END \
(MSP_PCI_SPACE_BASE + MSP_PCI_SPACE_SIZE - 1)
#define MSP_PCI_IOSPACE_BASE (MSP_PCI_OATRAN + 0x1001000UL)
#define MSP_PCI_IOSPACE_SIZE 0x1000
#define MSP_PCI_IOSPACE_END \
(MSP_PCI_IOSPACE_BASE + MSP_PCI_IOSPACE_SIZE - 1)
/* IRQ for PCI status interrupts */
#define PCI_STAT_IRQ 20
#define QFLUSH_REG_1 0xB7F40000
typedef volatile unsigned int pcireg;
typedef void * volatile ppcireg;
struct pci_block_copy
{
pcireg unused1; /* +0x00 */
pcireg unused2; /* +0x04 */
ppcireg unused3; /* +0x08 */
ppcireg unused4; /* +0x0C */
pcireg unused5; /* +0x10 */
pcireg unused6; /* +0x14 */
pcireg unused7; /* +0x18 */
ppcireg unused8; /* +0x1C */
ppcireg unused9; /* +0x20 */
pcireg unusedA; /* +0x24 */
ppcireg unusedB; /* +0x28 */
ppcireg unusedC; /* +0x2C */
};
enum
{
config_device_vendor, /* 0 */
config_status_command, /* 1 */
config_class_revision, /* 2 */
config_BIST_header_latency_cache, /* 3 */
config_BAR0, /* 4 */
config_BAR1, /* 5 */
config_BAR2, /* 6 */
config_not_used7, /* 7 */
config_not_used8, /* 8 */
config_not_used9, /* 9 */
config_CIS, /* 10 */
config_subsystem, /* 11 */
config_not_used12, /* 12 */
config_capabilities, /* 13 */
config_not_used14, /* 14 */
config_lat_grant_irq, /* 15 */
config_message_control,/* 16 */
config_message_addr, /* 17 */
config_message_data, /* 18 */
config_VPD_addr, /* 19 */
config_VPD_data, /* 20 */
config_maxregs /* 21 - number of registers */
};
struct msp_pci_regs
{
pcireg hop_unused_00; /* +0x00 */
pcireg hop_unused_04; /* +0x04 */
pcireg hop_unused_08; /* +0x08 */
pcireg hop_unused_0C; /* +0x0C */
pcireg hop_unused_10; /* +0x10 */
pcireg hop_unused_14; /* +0x14 */
pcireg hop_unused_18; /* +0x18 */
pcireg hop_unused_1C; /* +0x1C */
pcireg hop_unused_20; /* +0x20 */
pcireg hop_unused_24; /* +0x24 */
pcireg hop_unused_28; /* +0x28 */
pcireg hop_unused_2C; /* +0x2C */
pcireg hop_unused_30; /* +0x30 */
pcireg hop_unused_34; /* +0x34 */
pcireg if_control; /* +0x38 */
pcireg oatran; /* +0x3C */
pcireg reset_ctl; /* +0x40 */
pcireg config_addr; /* +0x44 */
pcireg hop_unused_48; /* +0x48 */
pcireg msg_signaled_int_status; /* +0x4C */
pcireg msg_signaled_int_mask; /* +0x50 */
pcireg if_status; /* +0x54 */
pcireg if_mask; /* +0x58 */
pcireg hop_unused_5C; /* +0x5C */
pcireg hop_unused_60; /* +0x60 */
pcireg hop_unused_64; /* +0x64 */
pcireg hop_unused_68; /* +0x68 */
pcireg hop_unused_6C; /* +0x6C */
pcireg hop_unused_70; /* +0x70 */
struct pci_block_copy pci_bc[2] __attribute__((aligned(64)));
pcireg error_hdr1; /* +0xE0 */
pcireg error_hdr2; /* +0xE4 */
pcireg config[config_maxregs] __attribute__((aligned(256)));
};
#define BPCI_CFGADDR_BUSNUM_SHF 16
#define BPCI_CFGADDR_FUNCTNUM_SHF 8
#define BPCI_CFGADDR_REGNUM_SHF 2
#define BPCI_CFGADDR_ENABLE (1<<31)
#define BPCI_IFCONTROL_RTO (1<<20) /* Retry timeout */
#define BPCI_IFCONTROL_HCE (1<<16) /* Host configuration enable */
#define BPCI_IFCONTROL_CTO_SHF 12 /* Shift count for CTO bits */
#define BPCI_IFCONTROL_SE (1<<5) /* Enable exceptions on errors */
#define BPCI_IFCONTROL_BIST (1<<4) /* Use BIST in per. mode */
#define BPCI_IFCONTROL_CAP (1<<3) /* Enable capabilities */
#define BPCI_IFCONTROL_MMC_SHF 0 /* Shift count for MMC bits */
#define BPCI_IFSTATUS_MGT (1<<8) /* Master Grant timeout */
#define BPCI_IFSTATUS_MTT (1<<9) /* Master TRDY timeout */
#define BPCI_IFSTATUS_MRT (1<<10) /* Master retry timeout */
#define BPCI_IFSTATUS_BC0F (1<<13) /* Block copy 0 fault */
#define BPCI_IFSTATUS_BC1F (1<<14) /* Block copy 1 fault */
#define BPCI_IFSTATUS_PCIU (1<<15) /* PCI unable to respond */
#define BPCI_IFSTATUS_BSIZ (1<<16) /* PCI access with illegal size */
#define BPCI_IFSTATUS_BADD (1<<17) /* PCI access with illegal addr */
#define BPCI_IFSTATUS_RTO (1<<18) /* Retry time out */
#define BPCI_IFSTATUS_SER (1<<19) /* System error */
#define BPCI_IFSTATUS_PER (1<<20) /* Parity error */
#define BPCI_IFSTATUS_LCA (1<<21) /* Local CPU abort */
#define BPCI_IFSTATUS_MEM (1<<22) /* Memory prot. violation */
#define BPCI_IFSTATUS_ARB (1<<23) /* Arbiter timed out */
#define BPCI_IFSTATUS_STA (1<<27) /* Signaled target abort */
#define BPCI_IFSTATUS_TA (1<<28) /* Target abort */
#define BPCI_IFSTATUS_MA (1<<29) /* Master abort */
#define BPCI_IFSTATUS_PEI (1<<30) /* Parity error as initiator */
#define BPCI_IFSTATUS_PET (1<<31) /* Parity error as target */
#define BPCI_RESETCTL_PR (1<<0) /* True if reset asserted */
#define BPCI_RESETCTL_RT (1<<4) /* Release time */
#define BPCI_RESETCTL_CT (1<<8) /* Config time */
#define BPCI_RESETCTL_PE (1<<12) /* PCI enabled */
#define BPCI_RESETCTL_HM (1<<13) /* PCI host mode */
#define BPCI_RESETCTL_RI (1<<14) /* PCI reset in */
extern struct msp_pci_regs msp_pci_regs
__attribute__((section(".register")));
extern unsigned long msp_pci_config_space
__attribute__((section(".register")));
#endif /* !_MSP_PCI_H_ */
arch/mips/include/asm/mach-pmcs-msp71xx/msp_prom.h deleted 100644 → 0
View file @ 10760dde
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* MIPS boards bootprom interface for the Linux kernel.
*
* Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
* Author: Carsten Langgaard, carstenl@mips.com
*
* ########################################################################
*
* ########################################################################
*/
#ifndef _ASM_MSP_PROM_H
#define _ASM_MSP_PROM_H
#include <linux/types.h>
#define DEVICEID "deviceid"
#define FEATURES "features"
#define PROM_ENV "prom_env"
#define PROM_ENV_FILE "/proc/"PROM_ENV
#define PROM_ENV_SIZE 256
#define CPU_DEVID_FAMILY 0x0000ff00
#define CPU_DEVID_REVISION 0x000000ff
#define FPGA_IS_POLO(revision) \
(((revision >= 0xb0) && (revision < 0xd0)))
#define FPGA_IS_5000(revision) \
((revision >= 0x80) && (revision <= 0x90))
#define FPGA_IS_ZEUS(revision) ((revision < 0x7f))
#define FPGA_IS_DUET(revision) \
(((revision >= 0xa0) && (revision < 0xb0)))
#define FPGA_IS_MSP4200(revision) ((revision >= 0xd0))
#define FPGA_IS_MSP7100(revision) ((revision >= 0xd0))
#define MACHINE_TYPE_POLO "POLO"
#define MACHINE_TYPE_DUET "DUET"
#define MACHINE_TYPE_ZEUS "ZEUS"
#define MACHINE_TYPE_MSP2000REVB "MSP2000REVB"
#define MACHINE_TYPE_MSP5000 "MSP5000"
#define MACHINE_TYPE_MSP4200 "MSP4200"
#define MACHINE_TYPE_MSP7120 "MSP7120"
#define MACHINE_TYPE_MSP7130 "MSP7130"
#define MACHINE_TYPE_OTHER "OTHER"
#define MACHINE_TYPE_POLO_FPGA "POLO-FPGA"
#define MACHINE_TYPE_DUET_FPGA "DUET-FPGA"
#define MACHINE_TYPE_ZEUS_FPGA "ZEUS_FPGA"
#define MACHINE_TYPE_MSP2000REVB_FPGA "MSP2000REVB-FPGA"
#define MACHINE_TYPE_MSP5000_FPGA "MSP5000-FPGA"
#define MACHINE_TYPE_MSP4200_FPGA "MSP4200-FPGA"
#define MACHINE_TYPE_MSP7100_FPGA "MSP7100-FPGA"
#define MACHINE_TYPE_OTHER_FPGA "OTHER-FPGA"
/* Device Family definitions */
#define FAMILY_FPGA 0x0000
#define FAMILY_ZEUS 0x1000
#define FAMILY_POLO 0x2000
#define FAMILY_DUET 0x4000
#define FAMILY_TRIAD 0x5000
#define FAMILY_MSP4200 0x4200
#define FAMILY_MSP4200_FPGA 0x4f00
#define FAMILY_MSP7100 0x7100
#define FAMILY_MSP7100_FPGA 0x7f00
/* Device Type definitions */
#define TYPE_MSP7120 0x7120
#define TYPE_MSP7130 0x7130
#define ENET_KEY 'E'
#define ENETTXD_KEY 'e'
#define PCI_KEY 'P'
#define PCIMUX_KEY 'p'
#define SEC_KEY 'S'
#define SPAD_KEY 'D'
#define TDM_KEY 'T'
#define ZSP_KEY 'Z'
#define FEATURE_NOEXIST '-'
#define FEATURE_EXIST '+'
#define ENET_MII 'M'
#define ENET_RMII 'R'
#define ENETTXD_FALLING 'F'
#define ENETTXD_RISING 'R'
#define PCI_HOST 'H'
#define PCI_PERIPHERAL 'P'
#define PCIMUX_FULL 'F'
#define PCIMUX_SINGLE 'S'
#define SEC_DUET 'D'
#define SEC_POLO 'P'
#define SEC_SLOW 'S'
#define SEC_TRIAD 'T'
#define SPAD_POLO 'P'
#define TDM_DUET 'D' /* DUET TDMs might exist */
#define TDM_POLO 'P' /* POLO TDMs might exist */
#define TDM_TRIAD 'T' /* TRIAD TDMs might exist */
#define ZSP_DUET 'D' /* one DUET zsp engine */
#define ZSP_TRIAD 'T' /* two TRIAD zsp engines */
extern char *prom_getenv(char *name);
extern void prom_init_cmdline(void);
extern void prom_meminit(void);
extern void prom_fixup_mem_map(unsigned long start_mem,
unsigned long end_mem);
extern int get_ethernet_addr(char *ethaddr_name, char *ethernet_addr);
extern unsigned long get_deviceid(void);
extern char identify_enet(unsigned long interface_num);
extern char identify_enetTxD(unsigned long interface_num);
extern char identify_pci(void);
extern char identify_sec(void);
extern char identify_spad(void);
extern char identify_sec(void);
extern char identify_tdm(void);
extern char identify_zsp(void);
extern unsigned long identify_family(void);
extern unsigned long identify_revision(void);
/*
* The following macro calls prom_printf and puts the format string
* into an init section so it can be reclaimed.
*/
#define ppfinit(f, x...) \
do { \
static char _f[] __initdata = KERN_INFO f; \
printk(_f, ## x); \
} while (0)
/* Memory descriptor management. */
#define PROM_MAX_PMEMBLOCKS 7 /* 6 used */
enum yamon_memtypes {
yamon_dontuse,
yamon_prom,
yamon_free,
};
struct prom_pmemblock {
unsigned long base; /* Within KSEG0. */
unsigned int size; /* In bytes. */
unsigned int type; /* free or prom memory */
};
extern int prom_argc;
extern char **prom_argv;
extern char **prom_envp;
extern int *prom_vec;
extern struct prom_pmemblock *prom_getmdesc(void);
#endif /* !_ASM_MSP_PROM_H */
arch/mips/include/asm/mach-pmcs-msp71xx/msp_regops.h deleted 100644 → 0
View file @ 10760dde
/*
* SMP/VPE-safe functions to access "registers" (see note).
*
* NOTES:
* - These macros use ll/sc instructions, so it is your responsibility to
* ensure these are available on your platform before including this file.
* - The MIPS32 spec states that ll/sc results are undefined for uncached
* accesses. This means they can't be used on HW registers accessed
* through kseg1. Code which requires these macros for this purpose must
* front-end the registers with cached memory "registers" and have a single
* thread update the actual HW registers.
* - A maximum of 2k of code can be inserted between ll and sc. Every
* memory accesses between the instructions will increase the chance of
* sc failing and having to loop.
* - When using custom_read_reg32/custom_write_reg32 only perform the
* necessary logical operations on the register value in between these
* two calls. All other logic should be performed before the first call.
* - There is a bug on the R10000 chips which has a workaround. If you
* are affected by this bug, make sure to define the symbol 'R10000_LLSC_WAR'
* to be non-zero. If you are using this header from within linux, you may
* include <asm/war.h> before including this file to have this defined
* appropriately for you.
*
* Copyright 2005-2007 PMC-Sierra, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
* EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc., 675
* Mass Ave, Cambridge, MA 02139, USA.
*/
#ifndef __ASM_REGOPS_H__
#define __ASM_REGOPS_H__
#include <linux/types.h>
#include <asm/compiler.h>
#include <asm/war.h>
#ifndef R10000_LLSC_WAR
#define R10000_LLSC_WAR 0
#endif
#if R10000_LLSC_WAR == 1
#define __beqz "beqzl "
#else
#define __beqz "beqz "
#endif
#ifndef _LINUX_TYPES_H
typedef unsigned int u32;
#endif
/*
* Sets all the masked bits to the corresponding value bits
*/
static inline void set_value_reg32(volatile u32 *const addr,
u32 const mask,
u32 const value)
{
u32 temp;
__asm__ __volatile__(
" .set push \n"
" .set arch=r4000 \n"
"1: ll %0, %1 # set_value_reg32 \n"
" and %0, %2 \n"
" or %0, %3 \n"
" sc %0, %1 \n"
" "__beqz"%0, 1b \n"
" nop \n"
" .set pop \n"
: "=&r" (temp), "=" GCC_OFF_SMALL_ASM() (*addr)
: "ir" (~mask), "ir" (value), GCC_OFF_SMALL_ASM() (*addr));
}
/*
* Sets all the masked bits to '1'
*/
static inline void set_reg32(volatile u32 *const addr,
u32 const mask)
{
u32 temp;
__asm__ __volatile__(
" .set push \n"
" .set arch=r4000 \n"
"1: ll %0, %1 # set_reg32 \n"
" or %0, %2 \n"
" sc %0, %1 \n"
" "__beqz"%0, 1b \n"
" nop \n"
" .set pop \n"
: "=&r" (temp), "=" GCC_OFF_SMALL_ASM() (*addr)
: "ir" (mask), GCC_OFF_SMALL_ASM() (*addr));
}
/*
* Sets all the masked bits to '0'
*/
static inline void clear_reg32(volatile u32 *const addr,
u32 const mask)
{
u32 temp;
__asm__ __volatile__(
" .set push \n"
" .set arch=r4000 \n"
"1: ll %0, %1 # clear_reg32 \n"
" and %0, %2 \n"
" sc %0, %1 \n"
" "__beqz"%0, 1b \n"
" nop \n"
" .set pop \n"
: "=&r" (temp), "=" GCC_OFF_SMALL_ASM() (*addr)
: "ir" (~mask), GCC_OFF_SMALL_ASM() (*addr));
}
/*
* Toggles all masked bits from '0' to '1' and '1' to '0'
*/
static inline void toggle_reg32(volatile u32 *const addr,
u32 const mask)
{
u32 temp;
__asm__ __volatile__(
" .set push \n"
" .set arch=r4000 \n"
"1: ll %0, %1 # toggle_reg32 \n"
" xor %0, %2 \n"
" sc %0, %1 \n"
" "__beqz"%0, 1b \n"
" nop \n"
" .set pop \n"
: "=&r" (temp), "=" GCC_OFF_SMALL_ASM() (*addr)
: "ir" (mask), GCC_OFF_SMALL_ASM() (*addr));
}
/*
* Read all masked bits others are returned as '0'
*/
static inline u32 read_reg32(volatile u32 *const addr,
u32 const mask)
{
u32 temp;
__asm__ __volatile__(
" .set push \n"
" .set noreorder \n"
" lw %0, %1 # read \n"
" and %0, %2 # mask \n"
" .set pop \n"
: "=&r" (temp)
: "m" (*addr), "ir" (mask));
return temp;
}
/*
* blocking_read_reg32 - Read address with blocking load
*
* Uncached writes need to be read back to ensure they reach RAM.
* The returned value must be 'used' to prevent from becoming a
* non-blocking load.
*/
static inline u32 blocking_read_reg32(volatile u32 *const addr)
{
u32 temp;
__asm__ __volatile__(
" .set push \n"
" .set noreorder \n"
" lw %0, %1 # read \n"
" move %0, %0 # block \n"
" .set pop \n"
: "=&r" (temp)
: "m" (*addr));
return temp;
}
/*
* For special strange cases only:
*
* If you need custom processing within a ll/sc loop, use the following macros
* VERY CAREFULLY:
*
* u32 tmp; <-- Define a variable to hold the data
*
* custom_read_reg32(address, tmp); <-- Reads the address and put the value
* in the 'tmp' variable given
*
* From here on out, you are (basically) atomic, so don't do anything too
* fancy!
* Also, this code may loop if the end of this block fails to write
* everything back safely due do the other CPU, so do NOT do anything
* with side-effects!
*
* custom_write_reg32(address, tmp); <-- Writes back 'tmp' safely.
*/
#define custom_read_reg32(address, tmp) \
__asm__ __volatile__( \
" .set push \n" \
" .set arch=r4000 \n" \
"1: ll %0, %1 #custom_read_reg32 \n" \
" .set pop \n" \
: "=r" (tmp), "=" GCC_OFF_SMALL_ASM() (*address) \
: GCC_OFF_SMALL_ASM() (*address))
#define custom_write_reg32(address, tmp) \
__asm__ __volatile__( \
" .set push \n" \
" .set arch=r4000 \n" \
" sc %0, %1 #custom_write_reg32 \n" \
" "__beqz"%0, 1b \n" \
" nop \n" \
" .set pop \n" \
: "=&r" (tmp), "=" GCC_OFF_SMALL_ASM() (*address) \
: "0" (tmp), GCC_OFF_SMALL_ASM() (*address))
#endif /* __ASM_REGOPS_H__ */
arch/mips/include/asm/mach-pmcs-msp71xx/msp_regs.h deleted 100644 → 0
View file @ 10760dde
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Defines for the address space, registers and register configuration
* (bit masks, access macros etc) for the PMC-Sierra line of MSP products.
* This file contains addess maps for all the devices in the line of
* products but only has register definitions and configuration masks for
* registers which aren't definitely associated with any device. Things
* like clock settings, reset access, the ELB etc. Individual device
* drivers will reference the appropriate XXX_BASE value defined here
* and have individual registers offset from that.
*
* Copyright (C) 2005-2007 PMC-Sierra, Inc. All rights reserved.
* Author: Andrew Hughes, Andrew_Hughes@pmc-sierra.com
*
* ########################################################################
*
* ########################################################################
*/
#include <asm/addrspace.h>
#include <linux/types.h>
#ifndef _ASM_MSP_REGS_H
#define _ASM_MSP_REGS_H
/*
########################################################################
# Address space and device base definitions #
########################################################################
*/
/*
***************************************************************************
* System Logic and Peripherals (ELB, UART0, etc) device address space *
***************************************************************************
*/
#define MSP_SLP_BASE 0x1c000000
/* System Logic and Peripherals */
#define MSP_RST_BASE (MSP_SLP_BASE + 0x10)
/* System reset register base */
#define MSP_RST_SIZE 0x0C /* System reset register space */
#define MSP_WTIMER_BASE (MSP_SLP_BASE + 0x04C)
/* watchdog timer base */
#define MSP_ITIMER_BASE (MSP_SLP_BASE + 0x054)
/* internal timer base */
#define MSP_UART0_BASE (MSP_SLP_BASE + 0x100)
/* UART0 controller base */
#define MSP_BCPY_CTRL_BASE (MSP_SLP_BASE + 0x120)
/* Block Copy controller base */
#define MSP_BCPY_DESC_BASE (MSP_SLP_BASE + 0x160)
/* Block Copy descriptor base */
/*
***************************************************************************
* PCI address space *
***************************************************************************
*/
#define MSP_PCI_BASE 0x19000000
/*
***************************************************************************
* MSbus device address space *
***************************************************************************
*/
#define MSP_MSB_BASE 0x18000000
/* MSbus address start */
#define MSP_PER_BASE (MSP_MSB_BASE + 0x400000)
/* Peripheral device registers */
#define MSP_MAC0_BASE (MSP_MSB_BASE + 0x600000)
/* MAC A device registers */
#define MSP_MAC1_BASE (MSP_MSB_BASE + 0x700000)
/* MAC B device registers */
#define MSP_MAC_SIZE 0xE0 /* MAC register space */
#define MSP_SEC_BASE (MSP_MSB_BASE + 0x800000)
/* Security Engine registers */
#define MSP_MAC2_BASE (MSP_MSB_BASE + 0x900000)
/* MAC C device registers */
#define MSP_ADSL2_BASE (MSP_MSB_BASE + 0xA80000)
/* ADSL2 device registers */
#define MSP_USB0_BASE (MSP_MSB_BASE + 0xB00000)
/* USB0 device registers */
#define MSP_USB1_BASE (MSP_MSB_BASE + 0x300000)
/* USB1 device registers */
#define MSP_CPUIF_BASE (MSP_MSB_BASE + 0xC00000)
/* CPU interface registers */
/* Devices within the MSbus peripheral block */
#define MSP_UART1_BASE (MSP_PER_BASE + 0x030)
/* UART1 controller base */
#define MSP_SPI_BASE (MSP_PER_BASE + 0x058)
/* SPI/MPI control registers */
#define MSP_TWI_BASE (MSP_PER_BASE + 0x090)
/* Two-wire control registers */
#define MSP_PTIMER_BASE (MSP_PER_BASE + 0x0F0)
/* Programmable timer control */
/*
***************************************************************************
* Physical Memory configuration address space *
***************************************************************************
*/
#define MSP_MEM_CFG_BASE 0x17f00000
#define MSP_MEM_INDIRECT_CTL_10 0x10
/*
* Notes:
* 1) The SPI registers are split into two blocks, one offset from the
* MSP_SPI_BASE by 0x00 and the other offset from the MSP_SPI_BASE by
* 0x68. The SPI driver definitions for the register must be aware
* of this.
* 2) The block copy engine register are divided into two regions, one
* for the control/configuration of the engine proper and one for the
* values of the descriptors used in the copy process. These have
* different base defines (CTRL_BASE vs DESC_BASE)
* 3) These constants are for physical addresses which means that they
* work correctly with "ioremap" and friends. This means that device
* drivers will need to remap these addresses using ioremap and perhaps
* the readw/writew macros. Or they could use the regptr() macro
* defined below, but the readw/writew calls are the correct thing.
* 4) The UARTs have an additional status register offset from the base
* address. This register isn't used in the standard 8250 driver but
* may be used in other software. Consult the hardware datasheet for
* offset details.
* 5) For some unknown reason the security engine (MSP_SEC_BASE) registers
* start at an offset of 0x84 from the base address but the block of
* registers before this is reserved for the security engine. The
* driver will have to be aware of this but it makes the register
* definitions line up better with the documentation.
*/
/*
########################################################################
# System register definitions. Not associated with a specific device #
########################################################################
*/
/*
* This macro maps the physical register number into uncached space
* and (for C code) casts it into a u32 pointer so it can be dereferenced
* Normally these would be accessed with ioremap and readX/writeX, but
* these are convenient for a lot of internal kernel code.
*/
#ifdef __ASSEMBLER__
#define regptr(addr) (KSEG1ADDR(addr))
#else
#define regptr(addr) ((volatile u32 *const)(KSEG1ADDR(addr)))
#endif
/*
***************************************************************************
* System Logic and Peripherals (RESET, ELB, etc) registers *
***************************************************************************
*/
/* System Control register definitions */
#define DEV_ID_REG regptr(MSP_SLP_BASE + 0x00)
/* Device-ID RO */
#define FWR_ID_REG regptr(MSP_SLP_BASE + 0x04)
/* Firmware-ID Register RW */
#define SYS_ID_REG0 regptr(MSP_SLP_BASE + 0x08)
/* System-ID Register-0 RW */
#define SYS_ID_REG1 regptr(MSP_SLP_BASE + 0x0C)
/* System-ID Register-1 RW */
/* System Reset register definitions */
#define RST_STS_REG regptr(MSP_SLP_BASE + 0x10)
/* System Reset Status RO */
#define RST_SET_REG regptr(MSP_SLP_BASE + 0x14)
/* System Set Reset WO */
#define RST_CLR_REG regptr(MSP_SLP_BASE + 0x18)
/* System Clear Reset WO */
/* System Clock Registers */
#define PCI_SLP_REG regptr(MSP_SLP_BASE + 0x1C)
/* PCI clock generator RW */
#define URT_SLP_REG regptr(MSP_SLP_BASE + 0x20)
/* UART clock generator RW */
/* reserved (MSP_SLP_BASE + 0x24) */
/* reserved (MSP_SLP_BASE + 0x28) */
#define PLL1_SLP_REG regptr(MSP_SLP_BASE + 0x2C)
/* PLL1 clock generator RW */
#define PLL0_SLP_REG regptr(MSP_SLP_BASE + 0x30)
/* PLL0 clock generator RW */
#define MIPS_SLP_REG regptr(MSP_SLP_BASE + 0x34)
/* MIPS clock generator RW */
#define VE_SLP_REG regptr(MSP_SLP_BASE + 0x38)
/* Voice Eng clock generator RW */
/* reserved (MSP_SLP_BASE + 0x3C) */
#define MSB_SLP_REG regptr(MSP_SLP_BASE + 0x40)
/* MS-Bus clock generator RW */
#define SMAC_SLP_REG regptr(MSP_SLP_BASE + 0x44)
/* Sec & MAC clock generator RW */
#define PERF_SLP_REG regptr(MSP_SLP_BASE + 0x48)
/* Per & TDM clock generator RW */
/* Interrupt Controller Registers */
#define SLP_INT_STS_REG regptr(MSP_SLP_BASE + 0x70)
/* Interrupt status register RW */
#define SLP_INT_MSK_REG regptr(MSP_SLP_BASE + 0x74)
/* Interrupt enable/mask RW */
#define SE_MBOX_REG regptr(MSP_SLP_BASE + 0x78)
/* Security Engine mailbox RW */
#define VE_MBOX_REG regptr(MSP_SLP_BASE + 0x7C)
/* Voice Engine mailbox RW */
/* ELB Controller Registers */
#define CS0_CNFG_REG regptr(MSP_SLP_BASE + 0x80)
/* ELB CS0 Configuration Reg */
#define CS0_ADDR_REG regptr(MSP_SLP_BASE + 0x84)
/* ELB CS0 Base Address Reg */
#define CS0_MASK_REG regptr(MSP_SLP_BASE + 0x88)
/* ELB CS0 Mask Register */
#define CS0_ACCESS_REG regptr(MSP_SLP_BASE + 0x8C)
/* ELB CS0 access register */
#define CS1_CNFG_REG regptr(MSP_SLP_BASE + 0x90)
/* ELB CS1 Configuration Reg */
#define CS1_ADDR_REG regptr(MSP_SLP_BASE + 0x94)
/* ELB CS1 Base Address Reg */
#define CS1_MASK_REG regptr(MSP_SLP_BASE + 0x98)
/* ELB CS1 Mask Register */
#define CS1_ACCESS_REG regptr(MSP_SLP_BASE + 0x9C)
/* ELB CS1 access register */
#define CS2_CNFG_REG regptr(MSP_SLP_BASE + 0xA0)
/* ELB CS2 Configuration Reg */
#define CS2_ADDR_REG regptr(MSP_SLP_BASE + 0xA4)
/* ELB CS2 Base Address Reg */
#define CS2_MASK_REG regptr(MSP_SLP_BASE + 0xA8)
/* ELB CS2 Mask Register */
#define CS2_ACCESS_REG regptr(MSP_SLP_BASE + 0xAC)
/* ELB CS2 access register */
#define CS3_CNFG_REG regptr(MSP_SLP_BASE + 0xB0)
/* ELB CS3 Configuration Reg */
#define CS3_ADDR_REG regptr(MSP_SLP_BASE + 0xB4)
/* ELB CS3 Base Address Reg */
#define CS3_MASK_REG regptr(MSP_SLP_BASE + 0xB8)
/* ELB CS3 Mask Register */
#define CS3_ACCESS_REG regptr(MSP_SLP_BASE + 0xBC)
/* ELB CS3 access register */
#define CS4_CNFG_REG regptr(MSP_SLP_BASE + 0xC0)
/* ELB CS4 Configuration Reg */
#define CS4_ADDR_REG regptr(MSP_SLP_BASE + 0xC4)
/* ELB CS4 Base Address Reg */
#define CS4_MASK_REG regptr(MSP_SLP_BASE + 0xC8)
/* ELB CS4 Mask Register */
#define CS4_ACCESS_REG regptr(MSP_SLP_BASE + 0xCC)
/* ELB CS4 access register */
#define CS5_CNFG_REG regptr(MSP_SLP_BASE + 0xD0)
/* ELB CS5 Configuration Reg */
#define CS5_ADDR_REG regptr(MSP_SLP_BASE + 0xD4)
/* ELB CS5 Base Address Reg */
#define CS5_MASK_REG regptr(MSP_SLP_BASE + 0xD8)
/* ELB CS5 Mask Register */
#define CS5_ACCESS_REG regptr(MSP_SLP_BASE + 0xDC)
/* ELB CS5 access register */
/* reserved 0xE0 - 0xE8 */
#define ELB_1PC_EN_REG regptr(MSP_SLP_BASE + 0xEC)
/* ELB single PC card detect */
/* reserved 0xF0 - 0xF8 */
#define ELB_CLK_CFG_REG regptr(MSP_SLP_BASE + 0xFC)
/* SDRAM read/ELB timing Reg */
/* Extended UART status registers */
#define UART0_STATUS_REG regptr(MSP_UART0_BASE + 0x0c0)
/* UART Status Register 0 */
#define UART1_STATUS_REG regptr(MSP_UART1_BASE + 0x170)
/* UART Status Register 1 */
/* Performance monitoring registers */
#define PERF_MON_CTRL_REG regptr(MSP_SLP_BASE + 0x140)
/* Performance monitor control */
#define PERF_MON_CLR_REG regptr(MSP_SLP_BASE + 0x144)
/* Performance monitor clear */
#define PERF_MON_CNTH_REG regptr(MSP_SLP_BASE + 0x148)
/* Perf monitor counter high */
#define PERF_MON_CNTL_REG regptr(MSP_SLP_BASE + 0x14C)
/* Perf monitor counter low */
/* System control registers */
#define SYS_CTRL_REG regptr(MSP_SLP_BASE + 0x150)
/* System control register */
#define SYS_ERR1_REG regptr(MSP_SLP_BASE + 0x154)
/* System Error status 1 */
#define SYS_ERR2_REG regptr(MSP_SLP_BASE + 0x158)
/* System Error status 2 */
#define SYS_INT_CFG_REG regptr(MSP_SLP_BASE + 0x15C)
/* System Interrupt config */
/* Voice Engine Memory configuration */
#define VE_MEM_REG regptr(MSP_SLP_BASE + 0x17C)
/* Voice engine memory config */
/* CPU/SLP Error Status registers */
#define CPU_ERR1_REG regptr(MSP_SLP_BASE + 0x180)
/* CPU/SLP Error status 1 */
#define CPU_ERR2_REG regptr(MSP_SLP_BASE + 0x184)
/* CPU/SLP Error status 1 */
/* Extended GPIO registers */
#define EXTENDED_GPIO1_REG regptr(MSP_SLP_BASE + 0x188)
#define EXTENDED_GPIO2_REG regptr(MSP_SLP_BASE + 0x18c)
#define EXTENDED_GPIO_REG EXTENDED_GPIO1_REG
/* Backward-compatibility */
/* System Error registers */
#define SLP_ERR_STS_REG regptr(MSP_SLP_BASE + 0x190)
/* Int status for SLP errors */
#define SLP_ERR_MSK_REG regptr(MSP_SLP_BASE + 0x194)
/* Int mask for SLP errors */
#define SLP_ELB_ERST_REG regptr(MSP_SLP_BASE + 0x198)
/* External ELB reset */
#define SLP_BOOT_STS_REG regptr(MSP_SLP_BASE + 0x19C)
/* Boot Status */
/* Extended ELB addressing */
#define CS0_EXT_ADDR_REG regptr(MSP_SLP_BASE + 0x1A0)
/* CS0 Extended address */
#define CS1_EXT_ADDR_REG regptr(MSP_SLP_BASE + 0x1A4)
/* CS1 Extended address */
#define CS2_EXT_ADDR_REG regptr(MSP_SLP_BASE + 0x1A8)
/* CS2 Extended address */
#define CS3_EXT_ADDR_REG regptr(MSP_SLP_BASE + 0x1AC)
/* CS3 Extended address */
/* reserved 0x1B0 */
#define CS5_EXT_ADDR_REG regptr(MSP_SLP_BASE + 0x1B4)
/* CS5 Extended address */
/* PLL Adjustment registers */
#define PLL_LOCK_REG regptr(MSP_SLP_BASE + 0x200)
/* PLL0 lock status */
#define PLL_ARST_REG regptr(MSP_SLP_BASE + 0x204)
/* PLL Analog reset status */
#define PLL0_ADJ_REG regptr(MSP_SLP_BASE + 0x208)
/* PLL0 Adjustment value */
#define PLL1_ADJ_REG regptr(MSP_SLP_BASE + 0x20C)
/* PLL1 Adjustment value */
/*
***************************************************************************
* Peripheral Register definitions *
***************************************************************************
*/
/* Peripheral status */
#define PER_CTRL_REG regptr(MSP_PER_BASE + 0x50)
/* Peripheral control register */
#define PER_STS_REG regptr(MSP_PER_BASE + 0x54)
/* Peripheral status register */
/* SPI/MPI Registers */
#define SMPI_TX_SZ_REG regptr(MSP_PER_BASE + 0x58)
/* SPI/MPI Tx Size register */
#define SMPI_RX_SZ_REG regptr(MSP_PER_BASE + 0x5C)
/* SPI/MPI Rx Size register */
#define SMPI_CTL_REG regptr(MSP_PER_BASE + 0x60)
/* SPI/MPI Control register */
#define SMPI_MS_REG regptr(MSP_PER_BASE + 0x64)
/* SPI/MPI Chip Select reg */
#define SMPI_CORE_DATA_REG regptr(MSP_PER_BASE + 0xC0)
/* SPI/MPI Core Data reg */
#define SMPI_CORE_CTRL_REG regptr(MSP_PER_BASE + 0xC4)
/* SPI/MPI Core Control reg */
#define SMPI_CORE_STAT_REG regptr(MSP_PER_BASE + 0xC8)
/* SPI/MPI Core Status reg */
#define SMPI_CORE_SSEL_REG regptr(MSP_PER_BASE + 0xCC)
/* SPI/MPI Core Ssel reg */
#define SMPI_FIFO_REG regptr(MSP_PER_BASE + 0xD0)
/* SPI/MPI Data FIFO reg */
/* Peripheral Block Error Registers */
#define PER_ERR_STS_REG regptr(MSP_PER_BASE + 0x70)
/* Error Bit Status Register */
#define PER_ERR_MSK_REG regptr(MSP_PER_BASE + 0x74)
/* Error Bit Mask Register */
#define PER_HDR1_REG regptr(MSP_PER_BASE + 0x78)
/* Error Header 1 Register */
#define PER_HDR2_REG regptr(MSP_PER_BASE + 0x7C)
/* Error Header 2 Register */
/* Peripheral Block Interrupt Registers */
#define PER_INT_STS_REG regptr(MSP_PER_BASE + 0x80)
/* Interrupt status register */
#define PER_INT_MSK_REG regptr(MSP_PER_BASE + 0x84)
/* Interrupt Mask Register */
#define GPIO_INT_STS_REG regptr(MSP_PER_BASE + 0x88)
/* GPIO interrupt status reg */
#define GPIO_INT_MSK_REG regptr(MSP_PER_BASE + 0x8C)
/* GPIO interrupt MASK Reg */
/* POLO GPIO registers */
#define POLO_GPIO_DAT1_REG regptr(MSP_PER_BASE + 0x0E0)
/* Polo GPIO[8:0] data reg */
#define POLO_GPIO_CFG1_REG regptr(MSP_PER_BASE + 0x0E4)
/* Polo GPIO[7:0] config reg */
#define POLO_GPIO_CFG2_REG regptr(MSP_PER_BASE + 0x0E8)
/* Polo GPIO[15:8] config reg */
#define POLO_GPIO_OD1_REG regptr(MSP_PER_BASE + 0x0EC)
/* Polo GPIO[31:0] output drive */
#define POLO_GPIO_CFG3_REG regptr(MSP_PER_BASE + 0x170)
/* Polo GPIO[23:16] config reg */
#define POLO_GPIO_DAT2_REG regptr(MSP_PER_BASE + 0x174)
/* Polo GPIO[15:9] data reg */
#define POLO_GPIO_DAT3_REG regptr(MSP_PER_BASE + 0x178)
/* Polo GPIO[23:16] data reg */
#define POLO_GPIO_DAT4_REG regptr(MSP_PER_BASE + 0x17C)
/* Polo GPIO[31:24] data reg */
#define POLO_GPIO_DAT5_REG regptr(MSP_PER_BASE + 0x180)
/* Polo GPIO[39:32] data reg */
#define POLO_GPIO_DAT6_REG regptr(MSP_PER_BASE + 0x184)
/* Polo GPIO[47:40] data reg */
#define POLO_GPIO_DAT7_REG regptr(MSP_PER_BASE + 0x188)
/* Polo GPIO[54:48] data reg */
#define POLO_GPIO_CFG4_REG regptr(MSP_PER_BASE + 0x18C)
/* Polo GPIO[31:24] config reg */
#define POLO_GPIO_CFG5_REG regptr(MSP_PER_BASE + 0x190)
/* Polo GPIO[39:32] config reg */
#define POLO_GPIO_CFG6_REG regptr(MSP_PER_BASE + 0x194)
/* Polo GPIO[47:40] config reg */
#define POLO_GPIO_CFG7_REG regptr(MSP_PER_BASE + 0x198)
/* Polo GPIO[54:48] config reg */
#define POLO_GPIO_OD2_REG regptr(MSP_PER_BASE + 0x19C)
/* Polo GPIO[54:32] output drive */
/* Generic GPIO registers */
#define GPIO_DATA1_REG regptr(MSP_PER_BASE + 0x170)
/* GPIO[1:0] data register */
#define GPIO_DATA2_REG regptr(MSP_PER_BASE + 0x174)
/* GPIO[5:2] data register */
#define GPIO_DATA3_REG regptr(MSP_PER_BASE + 0x178)
/* GPIO[9:6] data register */
#define GPIO_DATA4_REG regptr(MSP_PER_BASE + 0x17C)
/* GPIO[15:10] data register */
#define GPIO_CFG1_REG regptr(MSP_PER_BASE + 0x180)
/* GPIO[1:0] config register */
#define GPIO_CFG2_REG regptr(MSP_PER_BASE + 0x184)
/* GPIO[5:2] config register */
#define GPIO_CFG3_REG regptr(MSP_PER_BASE + 0x188)
/* GPIO[9:6] config register */
#define GPIO_CFG4_REG regptr(MSP_PER_BASE + 0x18C)
/* GPIO[15:10] config register */
#define GPIO_OD_REG regptr(MSP_PER_BASE + 0x190)
/* GPIO[15:0] output drive */
/*
***************************************************************************
* CPU Interface register definitions *
***************************************************************************
*/
#define PCI_FLUSH_REG regptr(MSP_CPUIF_BASE + 0x00)
/* PCI-SDRAM queue flush trigger */
#define OCP_ERR1_REG regptr(MSP_CPUIF_BASE + 0x04)
/* OCP Error Attribute 1 */
#define OCP_ERR2_REG regptr(MSP_CPUIF_BASE + 0x08)
/* OCP Error Attribute 2 */
#define OCP_STS_REG regptr(MSP_CPUIF_BASE + 0x0C)
/* OCP Error Status */
#define CPUIF_PM_REG regptr(MSP_CPUIF_BASE + 0x10)
/* CPU policy configuration */
#define CPUIF_CFG_REG regptr(MSP_CPUIF_BASE + 0x10)
/* Misc configuration options */
/* Central Interrupt Controller Registers */
#define MSP_CIC_BASE (MSP_CPUIF_BASE + 0x8000)
/* Central Interrupt registers */
#define CIC_EXT_CFG_REG regptr(MSP_CIC_BASE + 0x00)
/* External interrupt config */
#define CIC_STS_REG regptr(MSP_CIC_BASE + 0x04)
/* CIC Interrupt Status */
#define CIC_VPE0_MSK_REG regptr(MSP_CIC_BASE + 0x08)
/* VPE0 Interrupt Mask */
#define CIC_VPE1_MSK_REG regptr(MSP_CIC_BASE + 0x0C)
/* VPE1 Interrupt Mask */
#define CIC_TC0_MSK_REG regptr(MSP_CIC_BASE + 0x10)
/* Thread Context 0 Int Mask */
#define CIC_TC1_MSK_REG regptr(MSP_CIC_BASE + 0x14)
/* Thread Context 1 Int Mask */
#define CIC_TC2_MSK_REG regptr(MSP_CIC_BASE + 0x18)
/* Thread Context 2 Int Mask */
#define CIC_TC3_MSK_REG regptr(MSP_CIC_BASE + 0x18)
/* Thread Context 3 Int Mask */
#define CIC_TC4_MSK_REG regptr(MSP_CIC_BASE + 0x18)
/* Thread Context 4 Int Mask */
#define CIC_PCIMSI_STS_REG regptr(MSP_CIC_BASE + 0x18)
#define CIC_PCIMSI_MSK_REG regptr(MSP_CIC_BASE + 0x18)
#define CIC_PCIFLSH_REG regptr(MSP_CIC_BASE + 0x18)
#define CIC_VPE0_SWINT_REG regptr(MSP_CIC_BASE + 0x08)
/*
***************************************************************************
* Memory controller registers *
***************************************************************************
*/
#define MEM_CFG1_REG regptr(MSP_MEM_CFG_BASE + 0x00)
#define MEM_SS_ADDR regptr(MSP_MEM_CFG_BASE + 0x00)
#define MEM_SS_DATA regptr(MSP_MEM_CFG_BASE + 0x04)
#define MEM_SS_WRITE regptr(MSP_MEM_CFG_BASE + 0x08)
/*
***************************************************************************
* PCI controller registers *
***************************************************************************
*/
#define PCI_BASE_REG regptr(MSP_PCI_BASE + 0x00)
#define PCI_CONFIG_SPACE_REG regptr(MSP_PCI_BASE + 0x800)
#define PCI_JTAG_DEVID_REG regptr(MSP_SLP_BASE + 0x13c)
/*
########################################################################
# Register content & macro definitions #
########################################################################
*/
/*
***************************************************************************
* DEV_ID defines *
***************************************************************************
*/
#define DEV_ID_PCI_DIS (1 << 26) /* Set if PCI disabled */
#define DEV_ID_PCI_HOST (1 << 20) /* Set if PCI host */
#define DEV_ID_SINGLE_PC (1 << 19) /* Set if single PC Card */
#define DEV_ID_FAMILY (0xff << 8) /* family ID code */
#define POLO_ZEUS_SUB_FAMILY (0x7 << 16) /* sub family for Polo/Zeus */
#define MSPFPGA_ID (0x00 << 8) /* you are on your own here */
#define MSP5000_ID (0x50 << 8)
#define MSP4F00_ID (0x4f << 8) /* FPGA version of MSP4200 */
#define MSP4E00_ID (0x4f << 8) /* FPGA version of MSP7120 */
#define MSP4200_ID (0x42 << 8)
#define MSP4000_ID (0x40 << 8)
#define MSP2XXX_ID (0x20 << 8)
#define MSPZEUS_ID (0x10 << 8)
#define MSP2004_SUB_ID (0x0 << 16)
#define MSP2005_SUB_ID (0x1 << 16)
#define MSP2006_SUB_ID (0x1 << 16)
#define MSP2007_SUB_ID (0x2 << 16)
#define MSP2010_SUB_ID (0x3 << 16)
#define MSP2015_SUB_ID (0x4 << 16)
#define MSP2020_SUB_ID (0x5 << 16)
#define MSP2100_SUB_ID (0x6 << 16)
/*
***************************************************************************
* RESET defines *
***************************************************************************
*/
#define MSP_GR_RST (0x01 << 0) /* Global reset bit */
#define MSP_MR_RST (0x01 << 1) /* MIPS reset bit */
#define MSP_PD_RST (0x01 << 2) /* PVC DMA reset bit */
#define MSP_PP_RST (0x01 << 3) /* PVC reset bit */
/* reserved */
#define MSP_EA_RST (0x01 << 6) /* Mac A reset bit */
#define MSP_EB_RST (0x01 << 7) /* Mac B reset bit */
#define MSP_SE_RST (0x01 << 8) /* Security Eng reset bit */
#define MSP_PB_RST (0x01 << 9) /* Per block reset bit */
#define MSP_EC_RST (0x01 << 10) /* Mac C reset bit */
#define MSP_TW_RST (0x01 << 11) /* TWI reset bit */
#define MSP_SPI_RST (0x01 << 12) /* SPI/MPI reset bit */
#define MSP_U1_RST (0x01 << 13) /* UART1 reset bit */
#define MSP_U0_RST (0x01 << 14) /* UART0 reset bit */
/*
***************************************************************************
* UART defines *
***************************************************************************
*/
#define MSP_BASE_BAUD 25000000
#define MSP_UART_REG_LEN 0x20
/*
***************************************************************************
* ELB defines *
***************************************************************************
*/
#define PCCARD_32 0x02 /* Set if is PCCARD 32 (Cardbus) */
#define SINGLE_PCCARD 0x01 /* Set to enable single PC card */
/*
***************************************************************************
* CIC defines *
***************************************************************************
*/
/* CIC_EXT_CFG_REG */
#define EXT_INT_POL(eirq) (1 << (eirq + 8))
#define EXT_INT_EDGE(eirq) (1 << eirq)
#define CIC_EXT_SET_TRIGGER_LEVEL(reg, eirq) (reg &= ~EXT_INT_EDGE(eirq))
#define CIC_EXT_SET_TRIGGER_EDGE(reg, eirq) (reg |= EXT_INT_EDGE(eirq))
#define CIC_EXT_SET_ACTIVE_HI(reg, eirq) (reg |= EXT_INT_POL(eirq))
#define CIC_EXT_SET_ACTIVE_LO(reg, eirq) (reg &= ~EXT_INT_POL(eirq))
#define CIC_EXT_SET_ACTIVE_RISING CIC_EXT_SET_ACTIVE_HI
#define CIC_EXT_SET_ACTIVE_FALLING CIC_EXT_SET_ACTIVE_LO
#define CIC_EXT_IS_TRIGGER_LEVEL(reg, eirq) \
((reg & EXT_INT_EDGE(eirq)) == 0)
#define CIC_EXT_IS_TRIGGER_EDGE(reg, eirq) (reg & EXT_INT_EDGE(eirq))
#define CIC_EXT_IS_ACTIVE_HI(reg, eirq) (reg & EXT_INT_POL(eirq))
#define CIC_EXT_IS_ACTIVE_LO(reg, eirq) \
((reg & EXT_INT_POL(eirq)) == 0)
#define CIC_EXT_IS_ACTIVE_RISING CIC_EXT_IS_ACTIVE_HI
#define CIC_EXT_IS_ACTIVE_FALLING CIC_EXT_IS_ACTIVE_LO
/*
***************************************************************************
* Memory Controller defines *
***************************************************************************
*/
/* Indirect memory controller registers */
#define DDRC_CFG(n) (n)
#define DDRC_DEBUG(n) (0x04 + n)
#define DDRC_CTL(n) (0x40 + n)
/* Macro to perform DDRC indirect write */
#define DDRC_INDIRECT_WRITE(reg, mask, value) \
({ \
*MEM_SS_ADDR = (((mask) & 0xf) << 8) | ((reg) & 0xff); \
*MEM_SS_DATA = (value); \
*MEM_SS_WRITE = 1; \
})
/*
***************************************************************************
* SPI/MPI Mode *
***************************************************************************
*/
#define SPI_MPI_RX_BUSY 0x00008000 /* SPI/MPI Receive Busy */
#define SPI_MPI_FIFO_EMPTY 0x00004000 /* SPI/MPI Fifo Empty */
#define SPI_MPI_TX_BUSY 0x00002000 /* SPI/MPI Transmit Busy */
#define SPI_MPI_FIFO_FULL 0x00001000 /* SPI/MPU FIFO full */
/*
***************************************************************************
* SPI/MPI Control Register *
***************************************************************************
*/
#define SPI_MPI_RX_START 0x00000004 /* Start receive command */
#define SPI_MPI_FLUSH_Q 0x00000002 /* Flush SPI/MPI Queue */
#define SPI_MPI_TX_START 0x00000001 /* Start Transmit Command */
#endif /* !_ASM_MSP_REGS_H */
arch/mips/include/asm/mach-pmcs-msp71xx/msp_slp_int.h deleted 100644 → 0
View file @ 10760dde
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Defines for the MSP interrupt controller.
*
* Copyright (C) 1999 MIPS Technologies, Inc. All rights reserved.
* Author: Carsten Langgaard, carstenl@mips.com
*
* ########################################################################
*
* ########################################################################
*/
#ifndef _MSP_SLP_INT_H
#define _MSP_SLP_INT_H
/*
* The PMC-Sierra SLP interrupts are arranged in a 3 level cascaded
* hierarchical system. The first level are the direct MIPS interrupts
* and are assigned the interrupt range 0-7. The second level is the SLM
* interrupt controller and is assigned the range 8-39. The third level
* comprises the Peripherial block, the PCI block, the PCI MSI block and
* the SLP. The PCI interrupts and the SLP errors are handled by the
* relevant subsystems so the core interrupt code needs only concern
* itself with the Peripheral block. These are assigned interrupts in
* the range 40-71.
*/
/*
* IRQs directly connected to CPU
*/
#define MSP_MIPS_INTBASE 0
#define MSP_INT_SW0 0 /* IRQ for swint0, C_SW0 */
#define MSP_INT_SW1 1 /* IRQ for swint1, C_SW1 */
#define MSP_INT_MAC0 2 /* IRQ for MAC 0, C_IRQ0 */
#define MSP_INT_MAC1 3 /* IRQ for MAC 1, C_IRQ1 */
#define MSP_INT_C_IRQ2 4 /* Wired off, C_IRQ2 */
#define MSP_INT_VE 5 /* IRQ for Voice Engine, C_IRQ3 */
#define MSP_INT_SLP 6 /* IRQ for SLM block, C_IRQ4 */
#define MSP_INT_TIMER 7 /* IRQ for the MIPS timer, C_IRQ5 */
/*
* IRQs cascaded on CPU interrupt 4 (CAUSE bit 12, C_IRQ4)
* These defines should be tied to the register definition for the SLM
* interrupt routine. For now, just use hard-coded values.
*/
#define MSP_SLP_INTBASE (MSP_MIPS_INTBASE + 8)
#define MSP_INT_EXT0 (MSP_SLP_INTBASE + 0)
/* External interrupt 0 */
#define MSP_INT_EXT1 (MSP_SLP_INTBASE + 1)
/* External interrupt 1 */
#define MSP_INT_EXT2 (MSP_SLP_INTBASE + 2)
/* External interrupt 2 */
#define MSP_INT_EXT3 (MSP_SLP_INTBASE + 3)
/* External interrupt 3 */
/* Reserved 4-7 */
/*
*************************************************************************
* DANGER/DANGER/DANGER/DANGER/DANGER/DANGER/DANGER/DANGER/DANGER/DANGER *
* Some MSP produces have this interrupt labelled as Voice and some are *
* SEC mbox ... *
*************************************************************************
*/
#define MSP_INT_SLP_VE (MSP_SLP_INTBASE + 8)
/* Cascaded IRQ for Voice Engine*/
#define MSP_INT_SLP_TDM (MSP_SLP_INTBASE + 9)
/* TDM interrupt */
#define MSP_INT_SLP_MAC0 (MSP_SLP_INTBASE + 10)
/* Cascaded IRQ for MAC 0 */
#define MSP_INT_SLP_MAC1 (MSP_SLP_INTBASE + 11)
/* Cascaded IRQ for MAC 1 */
#define MSP_INT_SEC (MSP_SLP_INTBASE + 12)
/* IRQ for security engine */
#define MSP_INT_PER (MSP_SLP_INTBASE + 13)
/* Peripheral interrupt */
#define MSP_INT_TIMER0 (MSP_SLP_INTBASE + 14)
/* SLP timer 0 */
#define MSP_INT_TIMER1 (MSP_SLP_INTBASE + 15)
/* SLP timer 1 */
#define MSP_INT_TIMER2 (MSP_SLP_INTBASE + 16)
/* SLP timer 2 */
#define MSP_INT_SLP_TIMER (MSP_SLP_INTBASE + 17)
/* Cascaded MIPS timer */
#define MSP_INT_BLKCP (MSP_SLP_INTBASE + 18)
/* Block Copy */
#define MSP_INT_UART0 (MSP_SLP_INTBASE + 19)
/* UART 0 */
#define MSP_INT_PCI (MSP_SLP_INTBASE + 20)
/* PCI subsystem */
#define MSP_INT_PCI_DBELL (MSP_SLP_INTBASE + 21)
/* PCI doorbell */
#define MSP_INT_PCI_MSI (MSP_SLP_INTBASE + 22)
/* PCI Message Signal */
#define MSP_INT_PCI_BC0 (MSP_SLP_INTBASE + 23)
/* PCI Block Copy 0 */
#define MSP_INT_PCI_BC1 (MSP_SLP_INTBASE + 24)
/* PCI Block Copy 1 */
#define MSP_INT_SLP_ERR (MSP_SLP_INTBASE + 25)
/* SLP error condition */
#define MSP_INT_MAC2 (MSP_SLP_INTBASE + 26)
/* IRQ for MAC2 */
/* Reserved 26-31 */
/*
* IRQs cascaded on SLP PER interrupt (MSP_INT_PER)
*/
#define MSP_PER_INTBASE (MSP_SLP_INTBASE + 32)
/* Reserved 0-1 */
#define MSP_INT_UART1 (MSP_PER_INTBASE + 2)
/* UART 1 */
/* Reserved 3-5 */
#define MSP_INT_2WIRE (MSP_PER_INTBASE + 6)
/* 2-wire */
#define MSP_INT_TM0 (MSP_PER_INTBASE + 7)
/* Peripheral timer block out 0 */
#define MSP_INT_TM1 (MSP_PER_INTBASE + 8)
/* Peripheral timer block out 1 */
/* Reserved 9 */
#define MSP_INT_SPRX (MSP_PER_INTBASE + 10)
/* SPI RX complete */
#define MSP_INT_SPTX (MSP_PER_INTBASE + 11)
/* SPI TX complete */
#define MSP_INT_GPIO (MSP_PER_INTBASE + 12)
/* GPIO */
#define MSP_INT_PER_ERR (MSP_PER_INTBASE + 13)
/* Peripheral error */
/* Reserved 14-31 */
#endif /* !_MSP_SLP_INT_H */
arch/mips/include/asm/mach-pmcs-msp71xx/msp_usb.h deleted 100644 → 0
View file @ 10760dde
/* SPDX-License-Identifier: GPL-2.0-or-later */
/******************************************************************
* Copyright (c) 2000-2007 PMC-Sierra INC.
*
* PMC-SIERRA INC. DISCLAIMS ANY LIABILITY OF ANY KIND
* FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS
* SOFTWARE.
*/
#ifndef MSP_USB_H_
#define MSP_USB_H_
#define NUM_USB_DEVS 1
/* Register spaces for USB host 0 */
#define MSP_USB0_MAB_START (MSP_USB0_BASE + 0x0)
#define MSP_USB0_MAB_END (MSP_USB0_BASE + 0x17)
#define MSP_USB0_ID_START (MSP_USB0_BASE + 0x40000)
#define MSP_USB0_ID_END (MSP_USB0_BASE + 0x4008f)
#define MSP_USB0_HS_START (MSP_USB0_BASE + 0x40100)
#define MSP_USB0_HS_END (MSP_USB0_BASE + 0x401FF)
/* Register spaces for USB host 1 */
#define MSP_USB1_MAB_START (MSP_USB1_BASE + 0x0)
#define MSP_USB1_MAB_END (MSP_USB1_BASE + 0x17)
#define MSP_USB1_ID_START (MSP_USB1_BASE + 0x40000)
#define MSP_USB1_ID_END (MSP_USB1_BASE + 0x4008f)
#define MSP_USB1_HS_START (MSP_USB1_BASE + 0x40100)
#define MSP_USB1_HS_END (MSP_USB1_BASE + 0x401ff)
/* USB Identification registers */
struct msp_usbid_regs {
u32 id; /* 0x0: Identification register */
u32 hwgen; /* 0x4: General HW params */
u32 hwhost; /* 0x8: Host HW params */
u32 hwdev; /* 0xc: Device HW params */
u32 hwtxbuf; /* 0x10: Tx buffer HW params */
u32 hwrxbuf; /* 0x14: Rx buffer HW params */
u32 reserved[26];
u32 timer0_load; /* 0x80: General-purpose timer 0 load*/
u32 timer0_ctrl; /* 0x84: General-purpose timer 0 control */
u32 timer1_load; /* 0x88: General-purpose timer 1 load*/
u32 timer1_ctrl; /* 0x8c: General-purpose timer 1 control */
};
/* MSBus to AMBA registers */
struct msp_mab_regs {
u32 isr; /* 0x0: Interrupt status */
u32 imr; /* 0x4: Interrupt mask */
u32 thcr0; /* 0x8: Transaction header capture 0 */
u32 thcr1; /* 0xc: Transaction header capture 1 */
u32 int_stat; /* 0x10: Interrupt status summary */
u32 phy_cfg; /* 0x14: USB phy config */
};
/* EHCI registers */
struct msp_usbhs_regs {
u32 hciver; /* 0x0: Version and offset to operational regs */
u32 hcsparams; /* 0x4: Host control structural parameters */
u32 hccparams; /* 0x8: Host control capability parameters */
u32 reserved0[5];
u32 dciver; /* 0x20: Device interface version */
u32 dccparams; /* 0x24: Device control capability parameters */
u32 reserved1[6];
u32 cmd; /* 0x40: USB command */
u32 sts; /* 0x44: USB status */
u32 int_ena; /* 0x48: USB interrupt enable */
u32 frindex; /* 0x4c: Frame index */
u32 reserved3;
union {
struct {
u32 flb_addr; /* 0x54: Frame list base address */
u32 next_async_addr; /* 0x58: next asynchronous addr */
u32 ttctrl; /* 0x5c: embedded transaction translator
async buffer status */
u32 burst_size; /* 0x60: Controller burst size */
u32 tx_fifo_ctrl; /* 0x64: Tx latency FIFO tuning */
u32 reserved0[4];
u32 endpt_nak; /* 0x78: Endpoint NAK */
u32 endpt_nak_ena; /* 0x7c: Endpoint NAK enable */
u32 cfg_flag; /* 0x80: Config flag */
u32 port_sc1; /* 0x84: Port status & control 1 */
u32 reserved1[7];
u32 otgsc; /* 0xa4: OTG status & control */
u32 mode; /* 0xa8: USB controller mode */
} host;
struct {
u32 dev_addr; /* 0x54: Device address */
u32 endpt_list_addr; /* 0x58: Endpoint list address */
u32 reserved0[7];
u32 endpt_nak; /* 0x74 */
u32 endpt_nak_ctrl; /* 0x78 */
u32 cfg_flag; /* 0x80 */
u32 port_sc1; /* 0x84: Port status & control 1 */
u32 reserved[7];
u32 otgsc; /* 0xa4: OTG status & control */
u32 mode; /* 0xa8: USB controller mode */
u32 endpt_setup_stat; /* 0xac */
u32 endpt_prime; /* 0xb0 */
u32 endpt_flush; /* 0xb4 */
u32 endpt_stat; /* 0xb8 */
u32 endpt_complete; /* 0xbc */
u32 endpt_ctrl0; /* 0xc0 */
u32 endpt_ctrl1; /* 0xc4 */
u32 endpt_ctrl2; /* 0xc8 */
u32 endpt_ctrl3; /* 0xcc */
} device;
} u;
};
/*
* Container for the more-generic platform_device.
* This exists mainly as a way to map the non-standard register
* spaces and make them accessible to the USB ISR.
*/
struct mspusb_device {
struct msp_mab_regs __iomem *mab_regs;
struct msp_usbid_regs __iomem *usbid_regs;
struct msp_usbhs_regs __iomem *usbhs_regs;
struct platform_device dev;
};
#define to_mspusb_device(x) container_of((x), struct mspusb_device, dev)
#define TO_HOST_ID(x) ((x) & 0x3)
#endif /*MSP_USB_H_*/
arch/mips/include/asm/mach-pmcs-msp71xx/war.h deleted 100644 → 0
View file @ 10760dde
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
*/
#ifndef __ASM_MIPS_PMC_SIERRA_WAR_H
#define __ASM_MIPS_PMC_SIERRA_WAR_H
#define R4600_V1_INDEX_ICACHEOP_WAR 0
#define R4600_V1_HIT_CACHEOP_WAR 0
#define R4600_V2_HIT_CACHEOP_WAR 0
#define BCM1250_M3_WAR 0
#define SIBYTE_1956_WAR 0
#define MIPS4K_ICACHE_REFILL_WAR 0
#define MIPS_CACHE_SYNC_WAR 0
#define TX49XX_ICACHE_INDEX_INV_WAR 0
#define ICACHE_REFILLS_WORKAROUND_WAR 0
#define R10000_LLSC_WAR 0
#if defined(CONFIG_PMC_MSP7120_EVAL) || defined(CONFIG_PMC_MSP7120_GW) || \
defined(CONFIG_PMC_MSP7120_FPGA)
#define MIPS34K_MISSED_ITLB_WAR 1
#else
#define MIPS34K_MISSED_ITLB_WAR 0
#endif
#endif /* __ASM_MIPS_PMC_SIERRA_WAR_H */
arch/mips/pci/Makefile
View file @ 1b00767f
......@@ -35,9 +35,6 @@ obj-$(CONFIG_LEMOTE_FULOONG2E) += fixup-fuloong2e.o ops-loongson2.o
obj-$(CONFIG_LEMOTE_MACH2F) += fixup-lemote2f.o ops-loongson2.o
obj-$(CONFIG_MACH_LOONGSON64) += fixup-loongson3.o ops-loongson3.o
obj-$(CONFIG_MIPS_MALTA) += fixup-malta.o pci-malta.o
obj-$(CONFIG_PMC_MSP7120_GW) += fixup-pmcmsp.o ops-pmcmsp.o
obj-$(CONFIG_PMC_MSP7120_EVAL) += fixup-pmcmsp.o ops-pmcmsp.o
obj-$(CONFIG_PMC_MSP7120_FPGA) += fixup-pmcmsp.o ops-pmcmsp.o
obj-$(CONFIG_SGI_IP27) += pci-ip27.o
obj-$(CONFIG_SGI_IP32) += fixup-ip32.o ops-mace.o pci-ip32.o
obj-$(CONFIG_SIBYTE_SB1250) += fixup-sb1250.o pci-sb1250.o
......
arch/mips/pci/fixup-pmcmsp.c deleted 100644 → 0
View file @ 10760dde
/*
* PMC-Sierra MSP board specific pci fixups.
*
* Copyright 2001 MontaVista Software Inc.
* Copyright 2005-2007 PMC-Sierra, Inc
*
* Author: MontaVista Software, Inc.
* ppopov@mvista.com or source@mvista.com
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#ifdef CONFIG_PCI
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <asm/byteorder.h>
#include <msp_pci.h>
#include <msp_cic_int.h>
/* PCI interrupt pins */
#define IRQ4 MSP_INT_EXT4
#define IRQ5 MSP_INT_EXT5
#define IRQ6 MSP_INT_EXT6
#if defined(CONFIG_PMC_MSP7120_GW)
/* Garibaldi Board IRQ wiring to PCI slots */
static char irq_tab[][5] = {
/* INTA INTB INTC INTD */
{0, 0, 0, 0, 0 }, /* (AD[0]): Unused */
{0, 0, 0, 0, 0 }, /* (AD[1]): Unused */
{0, 0, 0, 0, 0 }, /* (AD[2]): Unused */
{0, 0, 0, 0, 0 }, /* (AD[3]): Unused */
{0, 0, 0, 0, 0 }, /* (AD[4]): Unused */
{0, 0, 0, 0, 0 }, /* (AD[5]): Unused */
{0, 0, 0, 0, 0 }, /* (AD[6]): Unused */
{0, 0, 0, 0, 0 }, /* (AD[7]): Unused */
{0, 0, 0, 0, 0 }, /* (AD[8]): Unused */
{0, 0, 0, 0, 0 }, /* (AD[9]): Unused */
{0, 0, 0, 0, 0 }, /* 0 (AD[10]): Unused */
{0, 0, 0, 0, 0 }, /* 1 (AD[11]): Unused */
{0, 0, 0, 0, 0 }, /* 2 (AD[12]): Unused */
{0, 0, 0, 0, 0 }, /* 3 (AD[13]): Unused */
{0, 0, 0, 0, 0 }, /* 4 (AD[14]): Unused */
{0, 0, 0, 0, 0 }, /* 5 (AD[15]): Unused */
{0, 0, 0, 0, 0 }, /* 6 (AD[16]): Unused */
{0, 0, 0, 0, 0 }, /* 7 (AD[17]): Unused */
{0, 0, 0, 0, 0 }, /* 8 (AD[18]): Unused */
{0, 0, 0, 0, 0 }, /* 9 (AD[19]): Unused */
{0, 0, 0, 0, 0 }, /* 10 (AD[20]): Unused */
{0, 0, 0, 0, 0 }, /* 11 (AD[21]): Unused */
{0, 0, 0, 0, 0 }, /* 12 (AD[22]): Unused */
{0, 0, 0, 0, 0 }, /* 13 (AD[23]): Unused */
{0, 0, 0, 0, 0 }, /* 14 (AD[24]): Unused */
{0, 0, 0, 0, 0 }, /* 15 (AD[25]): Unused */
{0, 0, 0, 0, 0 }, /* 16 (AD[26]): Unused */
{0, 0, 0, 0, 0 }, /* 17 (AD[27]): Unused */
{0, IRQ4, IRQ4, 0, 0 }, /* 18 (AD[28]): slot 0 */
{0, 0, 0, 0, 0 }, /* 19 (AD[29]): Unused */
{0, IRQ5, IRQ5, 0, 0 }, /* 20 (AD[30]): slot 1 */
{0, IRQ6, IRQ6, 0, 0 } /* 21 (AD[31]): slot 2 */
};
#elif defined(CONFIG_PMC_MSP7120_EVAL)
/* MSP7120 Eval Board IRQ wiring to PCI slots */
static char irq_tab[][5] = {
/* INTA INTB INTC INTD */
{0, 0, 0, 0, 0 }, /* (AD[0]): Unused */
{0, 0, 0, 0, 0 }, /* (AD[1]): Unused */
{0, 0, 0, 0, 0 }, /* (AD[2]): Unused */
{0, 0, 0, 0, 0 }, /* (AD[3]): Unused */
{0, 0, 0, 0, 0 }, /* (AD[4]): Unused */
{0, 0, 0, 0, 0 }, /* (AD[5]): Unused */
{0, 0, 0, 0, 0 }, /* (AD[6]): Unused */
{0, 0, 0, 0, 0 }, /* (AD[7]): Unused */
{0, 0, 0, 0, 0 }, /* (AD[8]): Unused */
{0, 0, 0, 0, 0 }, /* (AD[9]): Unused */
{0, 0, 0, 0, 0 }, /* 0 (AD[10]): Unused */
{0, 0, 0, 0, 0 }, /* 1 (AD[11]): Unused */
{0, 0, 0, 0, 0 }, /* 2 (AD[12]): Unused */
{0, 0, 0, 0, 0 }, /* 3 (AD[13]): Unused */
{0, 0, 0, 0, 0 }, /* 4 (AD[14]): Unused */
{0, 0, 0, 0, 0 }, /* 5 (AD[15]): Unused */
{0, IRQ6, IRQ6, 0, 0 }, /* 6 (AD[16]): slot 3 (mini) */
{0, IRQ5, IRQ5, 0, 0 }, /* 7 (AD[17]): slot 2 (mini) */
{0, IRQ4, IRQ4, IRQ4, IRQ4}, /* 8 (AD[18]): slot 0 (PCI) */
{0, IRQ5, IRQ5, IRQ5, IRQ5}, /* 9 (AD[19]): slot 1 (PCI) */
{0, 0, 0, 0, 0 }, /* 10 (AD[20]): Unused */
{0, 0, 0, 0, 0 }, /* 11 (AD[21]): Unused */
{0, 0, 0, 0, 0 }, /* 12 (AD[22]): Unused */
{0, 0, 0, 0, 0 }, /* 13 (AD[23]): Unused */
{0, 0, 0, 0, 0 }, /* 14 (AD[24]): Unused */
{0, 0, 0, 0, 0 }, /* 15 (AD[25]): Unused */
{0, 0, 0, 0, 0 }, /* 16 (AD[26]): Unused */
{0, 0, 0, 0, 0 }, /* 17 (AD[27]): Unused */
{0, 0, 0, 0, 0 }, /* 18 (AD[28]): Unused */
{0, 0, 0, 0, 0 }, /* 19 (AD[29]): Unused */
{0, 0, 0, 0, 0 }, /* 20 (AD[30]): Unused */
{0, 0, 0, 0, 0 } /* 21 (AD[31]): Unused */
};
#else
/* Unknown board -- don't assign any IRQs */
static char irq_tab[][5] = {
/* INTA INTB INTC INTD */
{0, 0, 0, 0, 0 }, /* (AD[0]): Unused */
{0, 0, 0, 0, 0 }, /* (AD[1]): Unused */
{0, 0, 0, 0, 0 }, /* (AD[2]): Unused */
{0, 0, 0, 0, 0 }, /* (AD[3]): Unused */
{0, 0, 0, 0, 0 }, /* (AD[4]): Unused */
{0, 0, 0, 0, 0 }, /* (AD[5]): Unused */
{0, 0, 0, 0, 0 }, /* (AD[6]): Unused */
{0, 0, 0, 0, 0 }, /* (AD[7]): Unused */
{0, 0, 0, 0, 0 }, /* (AD[8]): Unused */
{0, 0, 0, 0, 0 }, /* (AD[9]): Unused */
{0, 0, 0, 0, 0 }, /* 0 (AD[10]): Unused */
{0, 0, 0, 0, 0 }, /* 1 (AD[11]): Unused */
{0, 0, 0, 0, 0 }, /* 2 (AD[12]): Unused */
{0, 0, 0, 0, 0 }, /* 3 (AD[13]): Unused */
{0, 0, 0, 0, 0 }, /* 4 (AD[14]): Unused */
{0, 0, 0, 0, 0 }, /* 5 (AD[15]): Unused */
{0, 0, 0, 0, 0 }, /* 6 (AD[16]): Unused */
{0, 0, 0, 0, 0 }, /* 7 (AD[17]): Unused */
{0, 0, 0, 0, 0 }, /* 8 (AD[18]): Unused */
{0, 0, 0, 0, 0 }, /* 9 (AD[19]): Unused */
{0, 0, 0, 0, 0 }, /* 10 (AD[20]): Unused */
{0, 0, 0, 0, 0 }, /* 11 (AD[21]): Unused */
{0, 0, 0, 0, 0 }, /* 12 (AD[22]): Unused */
{0, 0, 0, 0, 0 }, /* 13 (AD[23]): Unused */
{0, 0, 0, 0, 0 }, /* 14 (AD[24]): Unused */
{0, 0, 0, 0, 0 }, /* 15 (AD[25]): Unused */
{0, 0, 0, 0, 0 }, /* 16 (AD[26]): Unused */
{0, 0, 0, 0, 0 }, /* 17 (AD[27]): Unused */
{0, 0, 0, 0, 0 }, /* 18 (AD[28]): Unused */
{0, 0, 0, 0, 0 }, /* 19 (AD[29]): Unused */
{0, 0, 0, 0, 0 }, /* 20 (AD[30]): Unused */
{0, 0, 0, 0, 0 } /* 21 (AD[31]): Unused */
};
#endif
/*****************************************************************************
*
* FUNCTION: pcibios_plat_dev_init
* _________________________________________________________________________
*
* DESCRIPTION: Perform platform specific device initialization at
* pci_enable_device() time.
* None are needed for the MSP7120 PCI Controller.
*
* INPUTS: dev - structure describing the PCI device
*
* OUTPUTS: none
*
* RETURNS: PCIBIOS_SUCCESSFUL
*
****************************************************************************/
int pcibios_plat_dev_init(struct pci_dev *dev)
{
return PCIBIOS_SUCCESSFUL;
}
/*****************************************************************************
*
* FUNCTION: pcibios_map_irq
* _________________________________________________________________________
*
* DESCRIPTION: Perform board supplied PCI IRQ mapping routine.
*
* INPUTS: dev - unused
* slot - PCI slot. Identified by which bit of the AD[] bus
* drives the IDSEL line. AD[10] is 0, AD[31] is
* slot 21.
* pin - numbered using the scheme of the PCI_INTERRUPT_PIN
* field of the config header.
*
* OUTPUTS: none
*
* RETURNS: IRQ number
*
****************************************************************************/
int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
#if !defined(CONFIG_PMC_MSP7120_GW) && !defined(CONFIG_PMC_MSP7120_EVAL)
printk(KERN_WARNING "PCI: unknown board, no PCI IRQs assigned.\n");
#endif
printk(KERN_WARNING "PCI: irq_tab returned %d for slot=%d pin=%d\n",
irq_tab[slot][pin], slot, pin);
return irq_tab[slot][pin];
}
#endif /* CONFIG_PCI */
arch/mips/pci/ops-pmcmsp.c deleted 100644 → 0
View file @ 10760dde
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* PMC-Sierra MSP board specific pci_ops
*
* Copyright 2001 MontaVista Software Inc.
* Copyright 2005-2007 PMC-Sierra, Inc
*
* Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
*
* Much of the code is derived from the original DDB5074 port by
* Geert Uytterhoeven <geert@linux-m68k.org>
*/
#define PCI_COUNTERS 1
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/interrupt.h>
#if defined(CONFIG_PROC_FS) && defined(PCI_COUNTERS)
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
#endif /* CONFIG_PROC_FS && PCI_COUNTERS */
#include <linux/kernel.h>
#include <linux/init.h>
#include <asm/byteorder.h>
#if defined(CONFIG_PMC_MSP7120_GW) || defined(CONFIG_PMC_MSP7120_EVAL)
#include <asm/mipsmtregs.h>
#endif
#include <msp_prom.h>
#include <msp_cic_int.h>
#include <msp_pci.h>
#include <msp_regs.h>
#include <msp_regops.h>
#define PCI_ACCESS_READ 0
#define PCI_ACCESS_WRITE 1
#if defined(CONFIG_PROC_FS) && defined(PCI_COUNTERS)
static char proc_init;
extern struct proc_dir_entry *proc_bus_pci_dir;
unsigned int pci_int_count[32];
static void pci_proc_init(void);
/*****************************************************************************
*
* FUNCTION: show_msp_pci_counts
* _________________________________________________________________________
*
* DESCRIPTION: Prints the count of how many times each PCI
* interrupt has asserted. Can be invoked by the
* /proc filesystem.
*
* INPUTS: m - synthetic file construction data
* v - iterator
*
* RETURNS: 0 or error
*
****************************************************************************/
static int show_msp_pci_counts(struct seq_file *m, void *v)
{
int i;
unsigned int intcount, total = 0;
for (i = 0; i < 32; ++i) {
intcount = pci_int_count[i];
if (intcount != 0) {
seq_printf(m, "[%d] = %u\n", i, intcount);
total += intcount;
}
}
seq_printf(m, "total = %u\n", total);
return 0;
}
/*****************************************************************************
*
* FUNCTION: gen_pci_cfg_wr_show
* _________________________________________________________________________
*
* DESCRIPTION: Generates a configuration write cycle for debug purposes.
* The IDSEL line asserted and location and data written are
* immaterial. Just want to be able to prove that a
* configuration write can be correctly generated on the
* PCI bus. Intent is that this function by invocable from
* the /proc filesystem.
*
* INPUTS: m - synthetic file construction data
* v - iterator
*
* RETURNS: 0 or error
*
****************************************************************************/
static int gen_pci_cfg_wr_show(struct seq_file *m, void *v)
{
unsigned char where = 0; /* Write to static Device/Vendor ID */
unsigned char bus_num = 0; /* Bus 0 */
unsigned char dev_fn = 0xF; /* Arbitrary device number */
u32 wr_data = 0xFF00AA00; /* Arbitrary data */
struct msp_pci_regs *preg = (void *)PCI_BASE_REG;
unsigned long value;
int intr;
seq_puts(m, "PMC MSP PCI: Beginning\n");
if (proc_init == 0) {
pci_proc_init();
proc_init = ~0;
}
seq_puts(m, "PMC MSP PCI: Before Cfg Wr\n");
/*
* Generate PCI Configuration Write Cycle
*/
/* Clear cause register bits */
preg->if_status = ~(BPCI_IFSTATUS_BC0F | BPCI_IFSTATUS_BC1F);
/* Setup address that is to appear on PCI bus */
preg->config_addr = BPCI_CFGADDR_ENABLE |
(bus_num << BPCI_CFGADDR_BUSNUM_SHF) |
(dev_fn << BPCI_CFGADDR_FUNCTNUM_SHF) |
(where & 0xFC);
value = cpu_to_le32(wr_data);
/* Launch the PCI configuration write cycle */
*PCI_CONFIG_SPACE_REG = value;
/*
* Check if the PCI configuration cycle (rd or wr) succeeded, by
* checking the status bits for errors like master or target abort.
*/
intr = preg->if_status;
seq_puts(m, "PMC MSP PCI: After Cfg Wr\n");
return 0;
}
/*****************************************************************************
*
* FUNCTION: pci_proc_init
* _________________________________________________________________________
*
* DESCRIPTION: Create entries in the /proc filesystem for debug access.
*
* INPUTS: none
*
* OUTPUTS: none
*
* RETURNS: none
*
****************************************************************************/
static void pci_proc_init(void)
{
proc_create_single("pmc_msp_pci_rd_cnt", 0, NULL, show_msp_pci_counts);
proc_create_single("pmc_msp_pci_cfg_wr", 0, NULL, gen_pci_cfg_wr_show);
}
#endif /* CONFIG_PROC_FS && PCI_COUNTERS */
/*****************************************************************************
*
* STRUCT: pci_io_resource
* _________________________________________________________________________
*
* DESCRIPTION: Defines the address range that pciauto() will use to
* assign to the I/O BARs of PCI devices.
*
* Use the start and end addresses of the MSP7120 PCI Host
* Controller I/O space, in the form that they appear on the
* PCI bus AFTER MSP7120 has performed address translation.
*
* For I/O accesses, MSP7120 ignores OATRAN and maps I/O
* accesses into the bottom 0xFFF region of address space,
* so that is the range to put into the pci_io_resource
* struct.
*
* In MSP4200, the start address was 0x04 instead of the
* expected 0x00. Will just assume there was a good reason
* for this!
*
* NOTES: Linux, by default, will assign I/O space to the lowest
* region of address space. Since MSP7120 and Linux,
* by default, have no offset in between how they map, the
* io_offset element of pci_controller struct should be set
* to zero.
* ELEMENTS:
* name - String used for a meaningful name.
*
* start - Start address of MSP7120's I/O space, as MSP7120 presents
* the address on the PCI bus.
*
* end - End address of MSP7120's I/O space, as MSP7120 presents
* the address on the PCI bus.
*
* flags - Attributes indicating the type of resource. In this case,
* indicate I/O space.
*
****************************************************************************/
static struct resource pci_io_resource = {
.name = "pci IO space",
.start = 0x04,
.end = 0x0FFF,
.flags = IORESOURCE_IO /* I/O space */
};
/*****************************************************************************
*
* STRUCT: pci_mem_resource
* _________________________________________________________________________
*
* DESCRIPTION: Defines the address range that pciauto() will use to
* assign to the memory BARs of PCI devices.
*
* The .start and .end values are dependent upon how address
* translation is performed by the OATRAN regiser.
*
* The values to use for .start and .end are the values
* in the form they appear on the PCI bus AFTER MSP7120 has
* performed OATRAN address translation.
*
* ELEMENTS:
* name - String used for a meaningful name.
*
* start - Start address of MSP7120's memory space, as MSP7120 presents
* the address on the PCI bus.
*
* end - End address of MSP7120's memory space, as MSP7120 presents
* the address on the PCI bus.
*
* flags - Attributes indicating the type of resource. In this case,
* indicate memory space.
*
****************************************************************************/
static struct resource pci_mem_resource = {
.name = "pci memory space",
.start = MSP_PCI_SPACE_BASE,
.end = MSP_PCI_SPACE_END,
.flags = IORESOURCE_MEM /* memory space */
};
/*****************************************************************************
*
* FUNCTION: bpci_interrupt
* _________________________________________________________________________
*
* DESCRIPTION: PCI status interrupt handler. Updates the count of how
* many times each status bit has been set, then clears
* the status bits. If the appropriate macros are defined,
* these counts can be viewed via the /proc filesystem.
*
* INPUTS: irq - unused
* dev_id - unused
* pt_regs - unused
*
* OUTPUTS: none
*
* RETURNS: PCIBIOS_SUCCESSFUL - success
*
****************************************************************************/
static irqreturn_t bpci_interrupt(int irq, void *dev_id)
{
struct msp_pci_regs *preg = (void *)PCI_BASE_REG;
unsigned int stat = preg->if_status;
#if defined(CONFIG_PROC_FS) && defined(PCI_COUNTERS)
int i;
for (i = 0; i < 32; ++i) {
if ((1 << i) & stat)
++pci_int_count[i];
}
#endif /* PROC_FS && PCI_COUNTERS */
/* printk("PCI ISR: Status=%08X\n", stat); */
/* write to clear all asserted interrupts */
preg->if_status = stat;
return IRQ_HANDLED;
}
/*****************************************************************************
*
* FUNCTION: msp_pcibios_config_access
* _________________________________________________________________________
*
* DESCRIPTION: Performs a PCI configuration access (rd or wr), then
* checks that the access succeeded by querying MSP7120's
* PCI status bits.
*
* INPUTS:
* access_type - kind of PCI configuration cycle to perform
* (read or write). Legal values are
* PCI_ACCESS_WRITE and PCI_ACCESS_READ.
*
* bus - pointer to the bus number of the device to
* be targeted for the configuration cycle.
* The only element of the pci_bus structure
* used is bus->number. This argument determines
* if the configuration access will be Type 0 or
* Type 1. Since MSP7120 assumes itself to be the
* PCI Host, any non-zero bus->number generates
* a Type 1 access.
*
* devfn - this is an 8-bit field. The lower three bits
* specify the function number of the device to
* be targeted for the configuration cycle, with
* all three-bit combinations being legal. The
* upper five bits specify the device number,
* with legal values being 10 to 31.
*
* where - address within the Configuration Header
* space to access.
*
* data - for write accesses, contains the data to
* write.
*
* OUTPUTS:
* data - for read accesses, contains the value read.
*
* RETURNS: PCIBIOS_SUCCESSFUL - success
* -1 - access failure
*
****************************************************************************/
int msp_pcibios_config_access(unsigned char access_type,
struct pci_bus *bus,
unsigned int devfn,
unsigned char where,
u32 *data)
{
struct msp_pci_regs *preg = (void *)PCI_BASE_REG;
unsigned char bus_num = bus->number;
unsigned char dev_fn = (unsigned char)devfn;
unsigned long intr;
unsigned long value;
static char pciirqflag;
int ret;
#if defined(CONFIG_PMC_MSP7120_GW) || defined(CONFIG_PMC_MSP7120_EVAL)
unsigned int vpe_status;
#endif
#if defined(CONFIG_PROC_FS) && defined(PCI_COUNTERS)
if (proc_init == 0) {
pci_proc_init();
proc_init = ~0;
}
#endif /* CONFIG_PROC_FS && PCI_COUNTERS */
/*
* Just the first time this function invokes, allocate
* an interrupt line for PCI host status interrupts. The
* allocation assigns an interrupt handler to the interrupt.
*/
if (pciirqflag == 0) {
ret = request_irq(MSP_INT_PCI,/* Hardcoded internal MSP7120 wiring */
bpci_interrupt,
IRQF_SHARED,
"PMC MSP PCI Host",
preg);
if (ret != 0)
return ret;
pciirqflag = ~0;
}
#if defined(CONFIG_PMC_MSP7120_GW) || defined(CONFIG_PMC_MSP7120_EVAL)
vpe_status = dvpe();
#endif
/*
* Clear PCI cause register bits.
*
* In Polo, the PCI Host had a dedicated DMA called the
* Block Copy (not to be confused with the general purpose Block
* Copy Engine block). There appear to have been special interrupts
* for this Block Copy, called Block Copy 0 Fault (BC0F) and
* Block Copy 1 Fault (BC1F). MSP4200 and MSP7120 don't have this
* dedicated Block Copy block, so these two interrupts are now
* marked reserved. In case the Block Copy is resurrected in a
* future design, maintain the code that treats these two interrupts
* specially.
*
* Write to clear all interrupts in the PCI status register, aside
* from BC0F and BC1F.
*/
preg->if_status = ~(BPCI_IFSTATUS_BC0F | BPCI_IFSTATUS_BC1F);
/* Setup address that is to appear on PCI bus */
preg->config_addr = BPCI_CFGADDR_ENABLE |
(bus_num << BPCI_CFGADDR_BUSNUM_SHF) |
(dev_fn << BPCI_CFGADDR_FUNCTNUM_SHF) |
(where & 0xFC);
/* IF access is a PCI configuration write */
if (access_type == PCI_ACCESS_WRITE) {
value = cpu_to_le32(*data);
*PCI_CONFIG_SPACE_REG = value;
} else {
/* ELSE access is a PCI configuration read */
value = le32_to_cpu(*PCI_CONFIG_SPACE_REG);
*data = value;
}
/*
* Check if the PCI configuration cycle (rd or wr) succeeded, by
* checking the status bits for errors like master or target abort.
*/
intr = preg->if_status;
/* Clear config access */
preg->config_addr = 0;
/* IF error occurred */
if (intr & ~(BPCI_IFSTATUS_BC0F | BPCI_IFSTATUS_BC1F)) {
/* Clear status bits */
preg->if_status = ~(BPCI_IFSTATUS_BC0F | BPCI_IFSTATUS_BC1F);
#if defined(CONFIG_PMC_MSP7120_GW) || defined(CONFIG_PMC_MSP7120_EVAL)
evpe(vpe_status);
#endif
return -1;
}
#if defined(CONFIG_PMC_MSP7120_GW) || defined(CONFIG_PMC_MSP7120_EVAL)
evpe(vpe_status);
#endif
return PCIBIOS_SUCCESSFUL;
}
/*****************************************************************************
*
* FUNCTION: msp_pcibios_read_config_byte
* _________________________________________________________________________
*
* DESCRIPTION: Read a byte from PCI configuration address spac
* Since the hardware can't address 8 bit chunks
* directly, read a 32-bit chunk, then mask off extraneous
* bits.
*
* INPUTS bus - structure containing attributes for the PCI bus
* that the read is destined for.
* devfn - device/function combination that the read is
* destined for.
* where - register within the Configuration Header space
* to access.
*
* OUTPUTS val - read data
*
* RETURNS: PCIBIOS_SUCCESSFUL - success
* -1 - read access failure
*
****************************************************************************/
static int
msp_pcibios_read_config_byte(struct pci_bus *bus,
unsigned int devfn,
int where,
u32 *val)
{
u32 data = 0;
/*
* If the config access did not complete normally (e.g., underwent
* master abort) do the PCI compliant thing, which is to supply an
* all ones value.
*/
if (msp_pcibios_config_access(PCI_ACCESS_READ, bus, devfn,
where, &data)) {
*val = 0xFFFFFFFF;
return -1;
}
*val = (data >> ((where & 3) << 3)) & 0x0ff;
return PCIBIOS_SUCCESSFUL;
}
/*****************************************************************************
*
* FUNCTION: msp_pcibios_read_config_word
* _________________________________________________________________________
*
* DESCRIPTION: Read a word (16 bits) from PCI configuration address space.
* Since the hardware can't address 16 bit chunks
* directly, read a 32-bit chunk, then mask off extraneous
* bits.
*
* INPUTS bus - structure containing attributes for the PCI bus
* that the read is destined for.
* devfn - device/function combination that the read is
* destined for.
* where - register within the Configuration Header space
* to access.
*
* OUTPUTS val - read data
*
* RETURNS: PCIBIOS_SUCCESSFUL - success
* PCIBIOS_BAD_REGISTER_NUMBER - bad register address
* -1 - read access failure
*
****************************************************************************/
static int
msp_pcibios_read_config_word(struct pci_bus *bus,
unsigned int devfn,
int where,
u32 *val)
{
u32 data = 0;
/* if (where & 1) */ /* Commented out non-compliant code.
* Should allow word access to configuration
* registers, with only exception being when
* the word access would wrap around into
* the next dword.
*/
if ((where & 3) == 3) {
*val = 0xFFFFFFFF;
return PCIBIOS_BAD_REGISTER_NUMBER;
}
/*
* If the config access did not complete normally (e.g., underwent
* master abort) do the PCI compliant thing, which is to supply an
* all ones value.
*/
if (msp_pcibios_config_access(PCI_ACCESS_READ, bus, devfn,
where, &data)) {
*val = 0xFFFFFFFF;
return -1;
}
*val = (data >> ((where & 3) << 3)) & 0x0ffff;
return PCIBIOS_SUCCESSFUL;
}
/*****************************************************************************
*
* FUNCTION: msp_pcibios_read_config_dword
* _________________________________________________________________________
*
* DESCRIPTION: Read a double word (32 bits) from PCI configuration
* address space.
*
* INPUTS bus - structure containing attributes for the PCI bus
* that the read is destined for.
* devfn - device/function combination that the read is
* destined for.
* where - register within the Configuration Header space
* to access.
*
* OUTPUTS val - read data
*
* RETURNS: PCIBIOS_SUCCESSFUL - success
* PCIBIOS_BAD_REGISTER_NUMBER - bad register address
* -1 - read access failure
*
****************************************************************************/
static int
msp_pcibios_read_config_dword(struct pci_bus *bus,
unsigned int devfn,
int where,
u32 *val)
{
u32 data = 0;
/* Address must be dword aligned. */
if (where & 3) {
*val = 0xFFFFFFFF;
return PCIBIOS_BAD_REGISTER_NUMBER;
}
/*
* If the config access did not complete normally (e.g., underwent
* master abort) do the PCI compliant thing, which is to supply an
* all ones value.
*/
if (msp_pcibios_config_access(PCI_ACCESS_READ, bus, devfn,
where, &data)) {
*val = 0xFFFFFFFF;
return -1;
}
*val = data;
return PCIBIOS_SUCCESSFUL;
}
/*****************************************************************************
*
* FUNCTION: msp_pcibios_write_config_byte
* _________________________________________________________________________
*
* DESCRIPTION: Write a byte to PCI configuration address space.
* Since the hardware can't address 8 bit chunks
* directly, a read-modify-write is performed.
*
* INPUTS bus - structure containing attributes for the PCI bus
* that the write is destined for.
* devfn - device/function combination that the write is
* destined for.
* where - register within the Configuration Header space
* to access.
* val - value to write
*
* OUTPUTS none
*
* RETURNS: PCIBIOS_SUCCESSFUL - success
* -1 - write access failure
*
****************************************************************************/
static int
msp_pcibios_write_config_byte(struct pci_bus *bus,
unsigned int devfn,
int where,
u8 val)
{
u32 data = 0;
/* read config space */
if (msp_pcibios_config_access(PCI_ACCESS_READ, bus, devfn,
where, &data))
return -1;
/* modify the byte within the dword */
data = (data & ~(0xff << ((where & 3) << 3))) |
(val << ((where & 3) << 3));
/* write back the full dword */
if (msp_pcibios_config_access(PCI_ACCESS_WRITE, bus, devfn,
where, &data))
return -1;
return PCIBIOS_SUCCESSFUL;
}
/*****************************************************************************
*
* FUNCTION: msp_pcibios_write_config_word
* _________________________________________________________________________
*
* DESCRIPTION: Write a word (16-bits) to PCI configuration address space.
* Since the hardware can't address 16 bit chunks
* directly, a read-modify-write is performed.
*
* INPUTS bus - structure containing attributes for the PCI bus
* that the write is destined for.
* devfn - device/function combination that the write is
* destined for.
* where - register within the Configuration Header space
* to access.
* val - value to write
*
* OUTPUTS none
*
* RETURNS: PCIBIOS_SUCCESSFUL - success
* PCIBIOS_BAD_REGISTER_NUMBER - bad register address
* -1 - write access failure
*
****************************************************************************/
static int
msp_pcibios_write_config_word(struct pci_bus *bus,
unsigned int devfn,
int where,
u16 val)
{
u32 data = 0;
/* Fixed non-compliance: if (where & 1) */
if ((where & 3) == 3)
return PCIBIOS_BAD_REGISTER_NUMBER;
/* read config space */
if (msp_pcibios_config_access(PCI_ACCESS_READ, bus, devfn,
where, &data))
return -1;
/* modify the word within the dword */
data = (data & ~(0xffff << ((where & 3) << 3))) |
(val << ((where & 3) << 3));
/* write back the full dword */
if (msp_pcibios_config_access(PCI_ACCESS_WRITE, bus, devfn,
where, &data))
return -1;
return PCIBIOS_SUCCESSFUL;
}
/*****************************************************************************
*
* FUNCTION: msp_pcibios_write_config_dword
* _________________________________________________________________________
*
* DESCRIPTION: Write a double word (32-bits) to PCI configuration address
* space.
*
* INPUTS bus - structure containing attributes for the PCI bus
* that the write is destined for.
* devfn - device/function combination that the write is
* destined for.
* where - register within the Configuration Header space
* to access.
* val - value to write
*
* OUTPUTS none
*
* RETURNS: PCIBIOS_SUCCESSFUL - success
* PCIBIOS_BAD_REGISTER_NUMBER - bad register address
* -1 - write access failure
*
****************************************************************************/
static int
msp_pcibios_write_config_dword(struct pci_bus *bus,
unsigned int devfn,
int where,
u32 val)
{
/* check that address is dword aligned */
if (where & 3)
return PCIBIOS_BAD_REGISTER_NUMBER;
/* perform write */
if (msp_pcibios_config_access(PCI_ACCESS_WRITE, bus, devfn,
where, &val))
return -1;
return PCIBIOS_SUCCESSFUL;
}
/*****************************************************************************
*
* FUNCTION: msp_pcibios_read_config
* _________________________________________________________________________
*
* DESCRIPTION: Interface the PCI configuration read request with
* the appropriate function, based on how many bytes
* the read request is.
*
* INPUTS bus - structure containing attributes for the PCI bus
* that the write is destined for.
* devfn - device/function combination that the write is
* destined for.
* where - register within the Configuration Header space
* to access.
* size - in units of bytes, should be 1, 2, or 4.
*
* OUTPUTS val - value read, with any extraneous bytes masked
* to zero.
*
* RETURNS: PCIBIOS_SUCCESSFUL - success
* -1 - failure
*
****************************************************************************/
int
msp_pcibios_read_config(struct pci_bus *bus,
unsigned int devfn,
int where,
int size,
u32 *val)
{
if (size == 1) {
if (msp_pcibios_read_config_byte(bus, devfn, where, val)) {
return -1;
}
} else if (size == 2) {
if (msp_pcibios_read_config_word(bus, devfn, where, val)) {
return -1;
}
} else if (size == 4) {
if (msp_pcibios_read_config_dword(bus, devfn, where, val)) {
return -1;
}
} else {
*val = 0xFFFFFFFF;
return -1;
}
return PCIBIOS_SUCCESSFUL;
}
/*****************************************************************************
*
* FUNCTION: msp_pcibios_write_config
* _________________________________________________________________________
*
* DESCRIPTION: Interface the PCI configuration write request with
* the appropriate function, based on how many bytes
* the read request is.
*
* INPUTS bus - structure containing attributes for the PCI bus
* that the write is destined for.
* devfn - device/function combination that the write is
* destined for.
* where - register within the Configuration Header space
* to access.
* size - in units of bytes, should be 1, 2, or 4.
* val - value to write
*
* OUTPUTS: none
*
* RETURNS: PCIBIOS_SUCCESSFUL - success
* -1 - failure
*
****************************************************************************/
int
msp_pcibios_write_config(struct pci_bus *bus,
unsigned int devfn,
int where,
int size,
u32 val)
{
if (size == 1) {
if (msp_pcibios_write_config_byte(bus, devfn,
where, (u8)(0xFF & val))) {
return -1;
}
} else if (size == 2) {
if (msp_pcibios_write_config_word(bus, devfn,
where, (u16)(0xFFFF & val))) {
return -1;
}
} else if (size == 4) {
if (msp_pcibios_write_config_dword(bus, devfn, where, val)) {
return -1;
}
} else {
return -1;
}
return PCIBIOS_SUCCESSFUL;
}
/*****************************************************************************
*
* STRUCTURE: msp_pci_ops
* _________________________________________________________________________
*
* DESCRIPTION: structure to abstract the hardware specific PCI
* configuration accesses.
*
* ELEMENTS:
* read - function for Linux to generate PCI Configuration reads.
* write - function for Linux to generate PCI Configuration writes.
*
****************************************************************************/
struct pci_ops msp_pci_ops = {
.read = msp_pcibios_read_config,
.write = msp_pcibios_write_config
};
/*****************************************************************************
*
* STRUCTURE: msp_pci_controller
* _________________________________________________________________________
*
* Describes the attributes of the MSP7120 PCI Host Controller
*
* ELEMENTS:
* pci_ops - abstracts the hardware specific PCI configuration
* accesses.
*
* mem_resource - address range pciauto() uses to assign to PCI device
* memory BARs.
*
* mem_offset - offset between how MSP7120 outbound PCI memory
* transaction addresses appear on the PCI bus and how Linux
* wants to configure memory BARs of the PCI devices.
* MSP7120 does nothing funky, so just set to zero.
*
* io_resource - address range pciauto() uses to assign to PCI device
* I/O BARs.
*
* io_offset - offset between how MSP7120 outbound PCI I/O
* transaction addresses appear on the PCI bus and how
* Linux defaults to configure I/O BARs of the PCI devices.
* MSP7120 maps outbound I/O accesses into the bottom
* bottom 4K of PCI address space (and ignores OATRAN).
* Since the Linux default is to configure I/O BARs to the
* bottom 4K, no special offset is needed. Just set to zero.
*
****************************************************************************/
static struct pci_controller msp_pci_controller = {
.pci_ops = &msp_pci_ops,
.mem_resource = &pci_mem_resource,
.mem_offset = 0,
.io_map_base = MSP_PCI_IOSPACE_BASE,
.io_resource = &pci_io_resource,
.io_offset = 0
};
/*****************************************************************************
*
* FUNCTION: msp_pci_init
* _________________________________________________________________________
*
* DESCRIPTION: Initialize the PCI Host Controller and register it with
* Linux so Linux can seize control of the PCI bus.
*
****************************************************************************/
void __init msp_pci_init(void)
{
struct msp_pci_regs *preg = (void *)PCI_BASE_REG;
u32 id;
/* Extract Device ID */
id = read_reg32(PCI_JTAG_DEVID_REG, 0xFFFF) >> 12;
/* Check if JTAG ID identifies MSP7120 */
if (!MSP_HAS_PCI(id)) {
printk(KERN_WARNING "PCI: No PCI; id reads as %x\n", id);
goto no_pci;
}
/*
* Enable flushing of the PCI-SDRAM queue upon a read
* of the SDRAM's Memory Configuration Register.
*/
*(unsigned long *)QFLUSH_REG_1 = 3;
/* Configure PCI Host Controller. */
preg->if_status = ~0; /* Clear cause register bits */
preg->config_addr = 0; /* Clear config access */
preg->oatran = MSP_PCI_OATRAN; /* PCI outbound addr translation */
preg->if_mask = 0xF8BF87C0; /* Enable all PCI status interrupts */
/* configure so inb(), outb(), and family are functional */
set_io_port_base(MSP_PCI_IOSPACE_BASE);
/* Tell Linux the details of the MSP7120 PCI Host Controller */
register_pci_controller(&msp_pci_controller);
return;
no_pci:
/* Disable PCI channel */
printk(KERN_WARNING "PCI: no host PCI bus detected\n");
}
arch/mips/pmcs-msp71xx/Kconfig deleted 100644 → 0
View file @ 10760dde
# SPDX-License-Identifier: GPL-2.0
choice
prompt "PMC-Sierra MSP SOC type"
depends on PMC_MSP
config PMC_MSP4200_EVAL
bool "PMC-Sierra MSP4200 Eval Board"
select IRQ_MSP_SLP
select HAVE_PCI
select MIPS_L1_CACHE_SHIFT_4
config PMC_MSP4200_GW
bool "PMC-Sierra MSP4200 VoIP Gateway"
select IRQ_MSP_SLP
select HAVE_PCI
config PMC_MSP7120_EVAL
bool "PMC-Sierra MSP7120 Eval Board"
select SYS_SUPPORTS_MULTITHREADING
select IRQ_MSP_CIC
select HAVE_PCI
config PMC_MSP7120_GW
bool "PMC-Sierra MSP7120 Residential Gateway"
select SYS_SUPPORTS_MULTITHREADING
select IRQ_MSP_CIC
select HAVE_PCI
select MSP_HAS_USB
select MSP_ETH
config PMC_MSP7120_FPGA
bool "PMC-Sierra MSP7120 FPGA"
select SYS_SUPPORTS_MULTITHREADING
select IRQ_MSP_CIC
select HAVE_PCI
endchoice
config MSP_HAS_USB
bool
depends on PMC_MSP
config MSP_ETH
bool
select MSP_HAS_MAC
depends on PMC_MSP
config MSP_HAS_MAC
bool
depends on PMC_MSP
arch/mips/pmcs-msp71xx/Makefile deleted 100644 → 0
View file @ 10760dde
# SPDX-License-Identifier: GPL-2.0
#
# Makefile for the PMC-Sierra MSP SOCs
#
obj-y += msp_prom.o msp_setup.o msp_irq.o \
msp_time.o msp_serial.o msp_elb.o
obj-$(CONFIG_PMC_MSP7120_GW) += msp_hwbutton.o
obj-$(CONFIG_IRQ_MSP_SLP) += msp_irq_slp.o
obj-$(CONFIG_IRQ_MSP_CIC) += msp_irq_cic.o msp_irq_per.o
obj-$(CONFIG_PCI) += msp_pci.o
obj-$(CONFIG_MSP_HAS_MAC) += msp_eth.o
obj-$(CONFIG_MSP_HAS_USB) += msp_usb.o
obj-$(CONFIG_MIPS_MT_SMP) += msp_smp.o
arch/mips/pmcs-msp71xx/Platform deleted 100644 → 0
View file @ 10760dde
#
# PMC-Sierra MSP SOCs
#
platform-$(CONFIG_PMC_MSP) += pmcs-msp71xx/
cflags-$(CONFIG_PMC_MSP) += -I$(srctree)/arch/mips/include/asm/mach-pmcs-msp71xx \
-mno-branch-likely
load-$(CONFIG_PMC_MSP) += 0xffffffff80100000
arch/mips/pmcs-msp71xx/msp_elb.c deleted 100644 → 0
View file @ 10760dde
/*
* Sets up the proper Chip Select configuration registers. It is assumed that
* PMON sets up the ADDR and MASK registers properly.
*
* Copyright 2005-2006 PMC-Sierra, Inc.
* Author: Marc St-Jean, Marc_St-Jean@pmc-sierra.com
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <msp_regs.h>
static int __init msp_elb_setup(void)
{
#if defined(CONFIG_PMC_MSP7120_GW) \
|| defined(CONFIG_PMC_MSP7120_EVAL)
/*
* Force all CNFG to be identical and equal to CS0,
* according to OPS doc
*/
*CS1_CNFG_REG = *CS2_CNFG_REG = *CS3_CNFG_REG = *CS0_CNFG_REG;
#endif
return 0;
}
subsys_initcall(msp_elb_setup);
arch/mips/pmcs-msp71xx/msp_eth.c deleted 100644 → 0
View file @ 10760dde
/*
* The setup file for ethernet related hardware on PMC-Sierra MSP processors.
*
* Copyright 2010 PMC-Sierra, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/ioport.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <msp_regs.h>
#include <msp_int.h>
#include <msp_gpio_macros.h>
#define MSP_ETHERNET_GPIO0 14
#define MSP_ETHERNET_GPIO1 15
#define MSP_ETHERNET_GPIO2 16
#define MSP_ETH_ID "pmc_mspeth"
#define MSP_ETH_SIZE 0xE0
static struct resource msp_eth0_resources[] = {
[0] = {
.start = MSP_MAC0_BASE,
.end = MSP_MAC0_BASE + MSP_ETH_SIZE - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = MSP_INT_MAC0,
.end = MSP_INT_MAC0,
.flags = IORESOURCE_IRQ,
},
};
static struct resource msp_eth1_resources[] = {
[0] = {
.start = MSP_MAC1_BASE,
.end = MSP_MAC1_BASE + MSP_ETH_SIZE - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = MSP_INT_MAC1,
.end = MSP_INT_MAC1,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device mspeth_device[] = {
[0] = {
.name = MSP_ETH_ID,
.id = 0,
.num_resources = ARRAY_SIZE(msp_eth0_resources),
.resource = msp_eth0_resources,
},
[1] = {
.name = MSP_ETH_ID,
.id = 1,
.num_resources = ARRAY_SIZE(msp_eth1_resources),
.resource = msp_eth1_resources,
},
};
#define msp_eth_devs mspeth_device
int __init msp_eth_setup(void)
{
int i, ret = 0;
/* Configure the GPIO and take the ethernet PHY out of reset */
msp_gpio_pin_mode(MSP_GPIO_OUTPUT, MSP_ETHERNET_GPIO0);
msp_gpio_pin_hi(MSP_ETHERNET_GPIO0);
for (i = 0; i < ARRAY_SIZE(msp_eth_devs); i++) {
ret = platform_device_register(&msp_eth_devs[i]);
printk(KERN_INFO "device: %d, return value = %d\n", i, ret);
if (ret) {
platform_device_unregister(&msp_eth_devs[i]);
break;
}
}
if (ret)
printk(KERN_WARNING "Could not initialize "
"MSPETH device structures.\n");
return ret;
}
subsys_initcall(msp_eth_setup);
arch/mips/pmcs-msp71xx/msp_hwbutton.c deleted 100644 → 0
View file @ 10760dde
/*
* Sets up interrupt handlers for various hardware switches which are
* connected to interrupt lines.
*
* Copyright 2005-2207 PMC-Sierra, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <msp_int.h>
#include <msp_regs.h>
#include <msp_regops.h>
/* For hwbutton_interrupt->initial_state */
#define HWBUTTON_HI 0x1
#define HWBUTTON_LO 0x2
/*
* This struct describes a hardware button
*/
struct hwbutton_interrupt {
char *name; /* Name of button */
int irq; /* Actual LINUX IRQ */
int eirq; /* Extended IRQ number (0-7) */
int initial_state; /* The "normal" state of the switch */
void (*handle_hi)(void *); /* Handler: switch input has gone HI */
void (*handle_lo)(void *); /* Handler: switch input has gone LO */
void *data; /* Optional data to pass to handler */
};
#ifdef CONFIG_PMC_MSP7120_GW
extern void msp_restart(char *);
static void softreset_push(void *data)
{
printk(KERN_WARNING "SOFTRESET switch was pushed\n");
/*
* In the future you could move this to the release handler,
* timing the difference between the 'push' and 'release', and only
* doing this ungraceful restart if the button has been down for
* a certain amount of time; otherwise doing a graceful restart.
*/
msp_restart(NULL);
}
static void softreset_release(void *data)
{
printk(KERN_WARNING "SOFTRESET switch was released\n");
/* Do nothing */
}
static void standby_on(void *data)
{
printk(KERN_WARNING "STANDBY switch was set to ON (not implemented)\n");
/* TODO: Put board in standby mode */
}
static void standby_off(void *data)
{
printk(KERN_WARNING
"STANDBY switch was set to OFF (not implemented)\n");
/* TODO: Take out of standby mode */
}
static struct hwbutton_interrupt softreset_sw = {
.name = "Softreset button",
.irq = MSP_INT_EXT0,
.eirq = 0,
.initial_state = HWBUTTON_HI,
.handle_hi = softreset_release,
.handle_lo = softreset_push,
.data = NULL,
};
static struct hwbutton_interrupt standby_sw = {
.name = "Standby switch",
.irq = MSP_INT_EXT1,
.eirq = 1,
.initial_state = HWBUTTON_HI,
.handle_hi = standby_off,
.handle_lo = standby_on,
.data = NULL,
};
#endif /* CONFIG_PMC_MSP7120_GW */
static irqreturn_t hwbutton_handler(int irq, void *data)
{
struct hwbutton_interrupt *hirq = data;
unsigned long cic_ext = *CIC_EXT_CFG_REG;
if (CIC_EXT_IS_ACTIVE_HI(cic_ext, hirq->eirq)) {
/* Interrupt: pin is now HI */
CIC_EXT_SET_ACTIVE_LO(cic_ext, hirq->eirq);
hirq->handle_hi(hirq->data);
} else {
/* Interrupt: pin is now LO */
CIC_EXT_SET_ACTIVE_HI(cic_ext, hirq->eirq);
hirq->handle_lo(hirq->data);
}
/*
* Invert the POLARITY of this level interrupt to ack the interrupt
* Thus next state change will invoke the opposite message
*/
*CIC_EXT_CFG_REG = cic_ext;
return IRQ_HANDLED;
}
static int msp_hwbutton_register(struct hwbutton_interrupt *hirq)
{
unsigned long cic_ext;
if (hirq->handle_hi == NULL || hirq->handle_lo == NULL)
return -EINVAL;
cic_ext = *CIC_EXT_CFG_REG;
CIC_EXT_SET_TRIGGER_LEVEL(cic_ext, hirq->eirq);
if (hirq->initial_state == HWBUTTON_HI)
CIC_EXT_SET_ACTIVE_LO(cic_ext, hirq->eirq);
else
CIC_EXT_SET_ACTIVE_HI(cic_ext, hirq->eirq);
*CIC_EXT_CFG_REG = cic_ext;
return request_irq(hirq->irq, hwbutton_handler, 0,
hirq->name, hirq);
}
static int __init msp_hwbutton_setup(void)
{
#ifdef CONFIG_PMC_MSP7120_GW
msp_hwbutton_register(&softreset_sw);
msp_hwbutton_register(&standby_sw);
#endif
return 0;
}
subsys_initcall(msp_hwbutton_setup);
arch/mips/pmcs-msp71xx/msp_irq.c deleted 100644 → 0
View file @ 10760dde
/*
* IRQ vector handles
*
* Copyright (C) 1995, 1996, 1997, 2003 by Ralf Baechle
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/ptrace.h>
#include <linux/time.h>
#include <asm/irq_cpu.h>
#include <asm/setup.h>
#include <msp_int.h>
/* SLP bases systems */
extern void msp_slp_irq_init(void);
extern void msp_slp_irq_dispatch(void);
/* CIC based systems */
extern void msp_cic_irq_init(void);
extern void msp_cic_irq_dispatch(void);
/* VSMP support init */
extern void msp_vsmp_int_init(void);
/* vectored interrupt implementation */
/* SW0/1 interrupts are used for SMP */
static inline void mac0_int_dispatch(void) { do_IRQ(MSP_INT_MAC0); }
static inline void mac1_int_dispatch(void) { do_IRQ(MSP_INT_MAC1); }
static inline void mac2_int_dispatch(void) { do_IRQ(MSP_INT_SAR); }
static inline void usb_int_dispatch(void) { do_IRQ(MSP_INT_USB); }
static inline void sec_int_dispatch(void) { do_IRQ(MSP_INT_SEC); }
/*
* The PMC-Sierra MSP interrupts are arranged in a 3 level cascaded
* hierarchical system. The first level are the direct MIPS interrupts
* and are assigned the interrupt range 0-7. The second level is the SLM
* interrupt controller and is assigned the range 8-39. The third level
* comprises the Peripherial block, the PCI block, the PCI MSI block and
* the SLP. The PCI interrupts and the SLP errors are handled by the
* relevant subsystems so the core interrupt code needs only concern
* itself with the Peripheral block. These are assigned interrupts in
* the range 40-71.
*/
asmlinkage void plat_irq_dispatch(void)
{
u32 pending;
pending = read_c0_status() & read_c0_cause();
/*
* jump to the correct interrupt routine
* These are arranged in priority order and the timer
* comes first!
*/
#ifdef CONFIG_IRQ_MSP_CIC /* break out the CIC stuff for now */
if (pending & C_IRQ4) /* do the peripherals first, that's the timer */
msp_cic_irq_dispatch();
else if (pending & C_IRQ0)
do_IRQ(MSP_INT_MAC0);
else if (pending & C_IRQ1)
do_IRQ(MSP_INT_MAC1);
else if (pending & C_IRQ2)
do_IRQ(MSP_INT_USB);
else if (pending & C_IRQ3)
do_IRQ(MSP_INT_SAR);
else if (pending & C_IRQ5)
do_IRQ(MSP_INT_SEC);
#else
if (pending & C_IRQ5)
do_IRQ(MSP_INT_TIMER);
else if (pending & C_IRQ0)
do_IRQ(MSP_INT_MAC0);
else if (pending & C_IRQ1)
do_IRQ(MSP_INT_MAC1);
else if (pending & C_IRQ3)
do_IRQ(MSP_INT_VE);
else if (pending & C_IRQ4)
msp_slp_irq_dispatch();
#endif
else if (pending & C_SW0) /* do software after hardware */
do_IRQ(MSP_INT_SW0);
else if (pending & C_SW1)
do_IRQ(MSP_INT_SW1);
}
void __init arch_init_irq(void)
{
/* assume we'll be using vectored interrupt mode except in UP mode*/
#ifdef CONFIG_MIPS_MT
BUG_ON(!cpu_has_vint);
#endif
/* initialize the 1st-level CPU based interrupt controller */
mips_cpu_irq_init();
#ifdef CONFIG_IRQ_MSP_CIC
msp_cic_irq_init();
#ifdef CONFIG_MIPS_MT
set_vi_handler(MSP_INT_CIC, msp_cic_irq_dispatch);
set_vi_handler(MSP_INT_MAC0, mac0_int_dispatch);
set_vi_handler(MSP_INT_MAC1, mac1_int_dispatch);
set_vi_handler(MSP_INT_SAR, mac2_int_dispatch);
set_vi_handler(MSP_INT_USB, usb_int_dispatch);
set_vi_handler(MSP_INT_SEC, sec_int_dispatch);
#ifdef CONFIG_MIPS_MT_SMP
msp_vsmp_int_init();
#endif /* CONFIG_MIPS_MT_SMP */
#endif /* CONFIG_MIPS_MT */
/* setup the cascaded interrupts */
if (request_irq(MSP_INT_CIC, no_action, IRQF_NO_THREAD,
"MSP CIC cascade", NULL))
pr_err("Failed to register MSP CIC cascade interrupt\n");
if (request_irq(MSP_INT_PER, no_action, IRQF_NO_THREAD,
"MSP PER cascade", NULL))
pr_err("Failed to register MSP PER cascade interrupt\n");
#else
/*
* Setup the 2nd-level SLP register based interrupt controller.
* VSMP support support is not enabled for SLP.
*/
msp_slp_irq_init();
/* setup the cascaded SLP/PER interrupts */
if (request_irq(MSP_INT_SLP, no_action, IRQF_NO_THREAD,
"MSP CIC cascade", NULL))
pr_err("Failed to register MSP CIC cascade interrupt\n");
if (request_irq(MSP_INT_PER, no_action, IRQF_NO_THREAD,
"MSP PER cascade", NULL))
pr_err("Failed to register MSP PER cascade interrupt\n");
#endif
}
arch/mips/pmcs-msp71xx/msp_irq_cic.c deleted 100644 → 0
View file @ 10760dde
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright 2010 PMC-Sierra, Inc, derived from irq_cpu.c
*
* This file define the irq handler for MSP CIC subsystem interrupts.
*/
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/bitops.h>
#include <linux/irq.h>
#include <asm/mipsregs.h>
#include <msp_cic_int.h>
#include <msp_regs.h>
/*
* External API
*/
extern void msp_per_irq_init(void);
extern void msp_per_irq_dispatch(void);
/*
* Convenience Macro. Should be somewhere generic.
*/
#define get_current_vpe() \
((read_c0_tcbind() >> TCBIND_CURVPE_SHIFT) & TCBIND_CURVPE)
#ifdef CONFIG_SMP
#define LOCK_VPE(flags, mtflags) \
do { \
local_irq_save(flags); \
mtflags = dmt(); \
} while (0)
#define UNLOCK_VPE(flags, mtflags) \
do { \
emt(mtflags); \
local_irq_restore(flags);\
} while (0)
#define LOCK_CORE(flags, mtflags) \
do { \
local_irq_save(flags); \
mtflags = dvpe(); \
} while (0)
#define UNLOCK_CORE(flags, mtflags) \
do { \
evpe(mtflags); \
local_irq_restore(flags);\
} while (0)
#else
#define LOCK_VPE(flags, mtflags)
#define UNLOCK_VPE(flags, mtflags)
#endif
/* ensure writes to cic are completed */
static inline void cic_wmb(void)
{
const volatile void __iomem *cic_mem = CIC_VPE0_MSK_REG;
volatile u32 dummy_read;
wmb();
dummy_read = __raw_readl(cic_mem);
dummy_read++;
}
static void unmask_cic_irq(struct irq_data *d)
{
volatile u32 *cic_msk_reg = CIC_VPE0_MSK_REG;
int vpe;
#ifdef CONFIG_SMP
unsigned int mtflags;
unsigned long flags;
/*
* Make sure we have IRQ affinity. It may have changed while
* we were processing the IRQ.
*/
if (!cpumask_test_cpu(smp_processor_id(),
irq_data_get_affinity_mask(d)))
return;
#endif
vpe = get_current_vpe();
LOCK_VPE(flags, mtflags);
cic_msk_reg[vpe] |= (1 << (d->irq - MSP_CIC_INTBASE));
UNLOCK_VPE(flags, mtflags);
cic_wmb();
}
static void mask_cic_irq(struct irq_data *d)
{
volatile u32 *cic_msk_reg = CIC_VPE0_MSK_REG;
int vpe = get_current_vpe();
#ifdef CONFIG_SMP
unsigned long flags, mtflags;
#endif
LOCK_VPE(flags, mtflags);
cic_msk_reg[vpe] &= ~(1 << (d->irq - MSP_CIC_INTBASE));
UNLOCK_VPE(flags, mtflags);
cic_wmb();
}
static void msp_cic_irq_ack(struct irq_data *d)
{
mask_cic_irq(d);
/*
* Only really necessary for 18, 16-14 and sometimes 3:0
* (since these can be edge sensitive) but it doesn't
* hurt for the others
*/
*CIC_STS_REG = (1 << (d->irq - MSP_CIC_INTBASE));
}
/* Note: Limiting to VSMP. */
#ifdef CONFIG_MIPS_MT_SMP
static int msp_cic_irq_set_affinity(struct irq_data *d,
const struct cpumask *cpumask, bool force)
{
int cpu;
unsigned long flags;
unsigned int mtflags;
unsigned long imask = (1 << (d->irq - MSP_CIC_INTBASE));
volatile u32 *cic_mask = (volatile u32 *)CIC_VPE0_MSK_REG;
/* timer balancing should be disabled in kernel code */
BUG_ON(d->irq == MSP_INT_VPE0_TIMER || d->irq == MSP_INT_VPE1_TIMER);
LOCK_CORE(flags, mtflags);
/* enable if any of each VPE's TCs require this IRQ */
for_each_online_cpu(cpu) {
if (cpumask_test_cpu(cpu, cpumask))
cic_mask[cpu] |= imask;
else
cic_mask[cpu] &= ~imask;
}
UNLOCK_CORE(flags, mtflags);
return 0;
}
#endif
static struct irq_chip msp_cic_irq_controller = {
.name = "MSP_CIC",
.irq_mask = mask_cic_irq,
.irq_mask_ack = msp_cic_irq_ack,
.irq_unmask = unmask_cic_irq,
.irq_ack = msp_cic_irq_ack,
#ifdef CONFIG_MIPS_MT_SMP
.irq_set_affinity = msp_cic_irq_set_affinity,
#endif
};
void __init msp_cic_irq_init(void)
{
int i;
/* Mask/clear interrupts. */
*CIC_VPE0_MSK_REG = 0x00000000;
*CIC_VPE1_MSK_REG = 0x00000000;
*CIC_STS_REG = 0xFFFFFFFF;
/*
* The MSP7120 RG and EVBD boards use IRQ[6:4] for PCI.
* These inputs map to EXT_INT_POL[6:4] inside the CIC.
* They are to be active low, level sensitive.
*/
*CIC_EXT_CFG_REG &= 0xFFFF8F8F;
/* initialize all the IRQ descriptors */
for (i = MSP_CIC_INTBASE ; i < MSP_CIC_INTBASE + 32 ; i++) {
irq_set_chip_and_handler(i, &msp_cic_irq_controller,
handle_level_irq);
}
/* Initialize the PER interrupt sub-system */
msp_per_irq_init();
}
/* CIC masked by CIC vector processing before dispatch called */
void msp_cic_irq_dispatch(void)
{
volatile u32 *cic_msk_reg = (volatile u32 *)CIC_VPE0_MSK_REG;
u32 cic_mask;
u32 pending;
int cic_status = *CIC_STS_REG;
cic_mask = cic_msk_reg[get_current_vpe()];
pending = cic_status & cic_mask;
if (pending & (1 << (MSP_INT_VPE0_TIMER - MSP_CIC_INTBASE))) {
do_IRQ(MSP_INT_VPE0_TIMER);
} else if (pending & (1 << (MSP_INT_VPE1_TIMER - MSP_CIC_INTBASE))) {
do_IRQ(MSP_INT_VPE1_TIMER);
} else if (pending & (1 << (MSP_INT_PER - MSP_CIC_INTBASE))) {
msp_per_irq_dispatch();
} else if (pending) {
do_IRQ(ffs(pending) + MSP_CIC_INTBASE - 1);
} else{
spurious_interrupt();
}
}
arch/mips/pmcs-msp71xx/msp_irq_per.c deleted 100644 → 0
View file @ 10760dde
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright 2010 PMC-Sierra, Inc, derived from irq_cpu.c
*
* This file define the irq handler for MSP PER subsystem interrupts.
*/
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/spinlock.h>
#include <linux/bitops.h>
#include <asm/mipsregs.h>
#include <msp_cic_int.h>
#include <msp_regs.h>
/*
* Convenience Macro. Should be somewhere generic.
*/
#define get_current_vpe() \
((read_c0_tcbind() >> TCBIND_CURVPE_SHIFT) & TCBIND_CURVPE)
#ifdef CONFIG_SMP
/*
* The PER registers must be protected from concurrent access.
*/
static DEFINE_SPINLOCK(per_lock);
#endif
/* ensure writes to per are completed */
static inline void per_wmb(void)
{
const volatile void __iomem *per_mem = PER_INT_MSK_REG;
volatile u32 dummy_read;
wmb();
dummy_read = __raw_readl(per_mem);
dummy_read++;
}
static inline void unmask_per_irq(struct irq_data *d)
{
#ifdef CONFIG_SMP
unsigned long flags;
spin_lock_irqsave(&per_lock, flags);
*PER_INT_MSK_REG |= (1 << (d->irq - MSP_PER_INTBASE));
spin_unlock_irqrestore(&per_lock, flags);
#else
*PER_INT_MSK_REG |= (1 << (d->irq - MSP_PER_INTBASE));
#endif
per_wmb();
}
static inline void mask_per_irq(struct irq_data *d)
{
#ifdef CONFIG_SMP
unsigned long flags;
spin_lock_irqsave(&per_lock, flags);
*PER_INT_MSK_REG &= ~(1 << (d->irq - MSP_PER_INTBASE));
spin_unlock_irqrestore(&per_lock, flags);
#else
*PER_INT_MSK_REG &= ~(1 << (d->irq - MSP_PER_INTBASE));
#endif
per_wmb();
}
static inline void msp_per_irq_ack(struct irq_data *d)
{
mask_per_irq(d);
/*
* In the PER interrupt controller, only bits 11 and 10
* are write-to-clear, (SPI TX complete, SPI RX complete).
* It does nothing for any others.
*/
*PER_INT_STS_REG = (1 << (d->irq - MSP_PER_INTBASE));
}
#ifdef CONFIG_SMP
static int msp_per_irq_set_affinity(struct irq_data *d,
const struct cpumask *affinity, bool force)
{
/* WTF is this doing ????? */
unmask_per_irq(d);
return 0;
}
#endif
static struct irq_chip msp_per_irq_controller = {
.name = "MSP_PER",
.irq_enable = unmask_per_irq,
.irq_disable = mask_per_irq,
.irq_ack = msp_per_irq_ack,
#ifdef CONFIG_SMP
.irq_set_affinity = msp_per_irq_set_affinity,
#endif
};
void __init msp_per_irq_init(void)
{
int i;
/* Mask/clear interrupts. */
*PER_INT_MSK_REG = 0x00000000;
*PER_INT_STS_REG = 0xFFFFFFFF;
/* initialize all the IRQ descriptors */
for (i = MSP_PER_INTBASE; i < MSP_PER_INTBASE + 32; i++) {
irq_set_chip(i, &msp_per_irq_controller);
}
}
void msp_per_irq_dispatch(void)
{
u32 per_mask = *PER_INT_MSK_REG;
u32 per_status = *PER_INT_STS_REG;
u32 pending;
pending = per_status & per_mask;
if (pending) {
do_IRQ(ffs(pending) + MSP_PER_INTBASE - 1);
} else {
spurious_interrupt();
}
}
arch/mips/pmcs-msp71xx/msp_irq_slp.c deleted 100644 → 0
View file @ 10760dde
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* This file define the irq handler for MSP SLM subsystem interrupts.
*
* Copyright 2005-2006 PMC-Sierra, Inc, derived from irq_cpu.c
* Author: Andrew Hughes, Andrew_Hughes@pmc-sierra.com
*/
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/bitops.h>
#include <asm/mipsregs.h>
#include <msp_slp_int.h>
#include <msp_regs.h>
static inline void unmask_msp_slp_irq(struct irq_data *d)
{
unsigned int irq = d->irq;
/* check for PER interrupt range */
if (irq < MSP_PER_INTBASE)
*SLP_INT_MSK_REG |= (1 << (irq - MSP_SLP_INTBASE));
else
*PER_INT_MSK_REG |= (1 << (irq - MSP_PER_INTBASE));
}
static inline void mask_msp_slp_irq(struct irq_data *d)
{
unsigned int irq = d->irq;
/* check for PER interrupt range */
if (irq < MSP_PER_INTBASE)
*SLP_INT_MSK_REG &= ~(1 << (irq - MSP_SLP_INTBASE));
else
*PER_INT_MSK_REG &= ~(1 << (irq - MSP_PER_INTBASE));
}
/*
* While we ack the interrupt interrupts are disabled and thus we don't need
* to deal with concurrency issues. Same for msp_slp_irq_end.
*/
static inline void ack_msp_slp_irq(struct irq_data *d)
{
unsigned int irq = d->irq;
/* check for PER interrupt range */
if (irq < MSP_PER_INTBASE)
*SLP_INT_STS_REG = (1 << (irq - MSP_SLP_INTBASE));
else
*PER_INT_STS_REG = (1 << (irq - MSP_PER_INTBASE));
}
static struct irq_chip msp_slp_irq_controller = {
.name = "MSP_SLP",
.irq_ack = ack_msp_slp_irq,
.irq_mask = mask_msp_slp_irq,
.irq_unmask = unmask_msp_slp_irq,
};
void __init msp_slp_irq_init(void)
{
int i;
/* Mask/clear interrupts. */
*SLP_INT_MSK_REG = 0x00000000;
*PER_INT_MSK_REG = 0x00000000;
*SLP_INT_STS_REG = 0xFFFFFFFF;
*PER_INT_STS_REG = 0xFFFFFFFF;
/* initialize all the IRQ descriptors */
for (i = MSP_SLP_INTBASE; i < MSP_PER_INTBASE + 32; i++)
irq_set_chip_and_handler(i, &msp_slp_irq_controller,
handle_level_irq);
}
void msp_slp_irq_dispatch(void)
{
u32 pending;
int intbase;
intbase = MSP_SLP_INTBASE;
pending = *SLP_INT_STS_REG & *SLP_INT_MSK_REG;
/* check for PER interrupt */
if (pending == (1 << (MSP_INT_PER - MSP_SLP_INTBASE))) {
intbase = MSP_PER_INTBASE;
pending = *PER_INT_STS_REG & *PER_INT_MSK_REG;
}
/* check for spurious interrupt */
if (pending == 0x00000000) {
printk(KERN_ERR "Spurious %s interrupt?\n",
(intbase == MSP_SLP_INTBASE) ? "SLP" : "PER");
return;
}
/* dispatch the irq */
do_IRQ(ffs(pending) + intbase - 1);
}
arch/mips/pmcs-msp71xx/msp_pci.c deleted 100644 → 0
View file @ 10760dde
/*
* The setup file for PCI related hardware on PMC-Sierra MSP processors.
*
* Copyright 2005-2006 PMC-Sierra, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/init.h>
#include <msp_prom.h>
#include <msp_regs.h>
extern void msp_pci_init(void);
static int __init msp_pci_setup(void)
{
#if 0 /* Linux 2.6 initialization code to be completed */
if (getdeviceid() & DEV_ID_SINGLE_PC) {
/* If single card mode */
slmRegs *sreg = (slmRegs *) SREG_BASE;
sreg->single_pc_enable = SINGLE_PCCARD;
}
#endif
msp_pci_init();
return 0;
}
subsys_initcall(msp_pci_setup);
arch/mips/pmcs-msp71xx/msp_prom.c deleted 100644 → 0
View file @ 10760dde
/*
* BRIEF MODULE DESCRIPTION
* PROM library initialisation code, assuming a version of
* pmon is the boot code.
*
* Copyright 2000,2001 MontaVista Software Inc.
* Author: MontaVista Software, Inc.
* ppopov@mvista.com or source@mvista.com
*
* This file was derived from Carsten Langgaard's
* arch/mips/mips-boards/xx files.
*
* Carsten Langgaard, carstenl@mips.com
* Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/export.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/string.h>
#include <linux/interrupt.h>
#include <linux/mm.h>
#include <linux/slab.h>
#include <asm/addrspace.h>
#include <asm/bootinfo.h>
#include <asm-generic/sections.h>
#include <asm/page.h>
#include <msp_prom.h>
#include <msp_regs.h>
/* global PROM environment variables and pointers */
int prom_argc;
char **prom_argv, **prom_envp;
int *prom_vec;
/* debug flag */
int init_debug = 1;
/* memory blocks */
struct prom_pmemblock mdesc[PROM_MAX_PMEMBLOCKS];
#define MAX_PROM_MEM 5
static phys_addr_t prom_mem_base[MAX_PROM_MEM] __initdata;
static phys_addr_t prom_mem_size[MAX_PROM_MEM] __initdata;
static unsigned int nr_prom_mem __initdata;
/* default feature sets */
static char msp_default_features[] =
#if defined(CONFIG_PMC_MSP4200_EVAL) \
|| defined(CONFIG_PMC_MSP4200_GW)
"ERER";
#elif defined(CONFIG_PMC_MSP7120_EVAL) \
|| defined(CONFIG_PMC_MSP7120_GW)
"EMEMSP";
#elif defined(CONFIG_PMC_MSP7120_FPGA)
"EMEM";
#endif
/* conversion functions */
static inline unsigned char str2hexnum(unsigned char c)
{
if (c >= '0' && c <= '9')
return c - '0';
if (c >= 'a' && c <= 'f')
return c - 'a' + 10;
return 0; /* foo */
}
int str2eaddr(unsigned char *ea, unsigned char *str)
{
int index = 0;
unsigned char num = 0;
while (*str != '\0') {
if ((*str == '.') || (*str == ':')) {
ea[index++] = num;
num = 0;
str++;
} else {
num = num << 4;
num |= str2hexnum(*str++);
}
}
if (index == 5) {
ea[index++] = num;
return 0;
} else
return -1;
}
EXPORT_SYMBOL(str2eaddr);
static inline unsigned long str2hex(unsigned char *str)
{
int value = 0;
while (*str) {
value = value << 4;
value |= str2hexnum(*str++);
}
return value;
}
/* function to query the system information */
const char *get_system_type(void)
{
#if defined(CONFIG_PMC_MSP4200_EVAL)
return "PMC-Sierra MSP4200 Eval Board";
#elif defined(CONFIG_PMC_MSP4200_GW)
return "PMC-Sierra MSP4200 VoIP Gateway";
#elif defined(CONFIG_PMC_MSP7120_EVAL)
return "PMC-Sierra MSP7120 Eval Board";
#elif defined(CONFIG_PMC_MSP7120_GW)
return "PMC-Sierra MSP7120 Residential Gateway";
#elif defined(CONFIG_PMC_MSP7120_FPGA)
return "PMC-Sierra MSP7120 FPGA";
#else
#error "What is the type of *your* MSP?"
#endif
}
int get_ethernet_addr(char *ethaddr_name, char *ethernet_addr)
{
char *ethaddr_str;
ethaddr_str = prom_getenv(ethaddr_name);
if (!ethaddr_str) {
printk(KERN_WARNING "%s not set in boot prom\n", ethaddr_name);
return -1;
}
if (str2eaddr(ethernet_addr, ethaddr_str) == -1) {
printk(KERN_WARNING "%s badly formatted-<%s>\n",
ethaddr_name, ethaddr_str);
return -1;
}
if (init_debug > 1) {
int i;
printk(KERN_DEBUG "get_ethernet_addr: for %s ", ethaddr_name);
for (i = 0; i < 5; i++)
printk(KERN_DEBUG "%02x:",
(unsigned char)*(ethernet_addr+i));
printk(KERN_DEBUG "%02x\n", *(ethernet_addr+i));
}
return 0;
}
EXPORT_SYMBOL(get_ethernet_addr);
static char *get_features(void)
{
char *feature = prom_getenv(FEATURES);
if (feature == NULL) {
/* default features based on MACHINE_TYPE */
feature = msp_default_features;
}
return feature;
}
static char test_feature(char c)
{
char *feature = get_features();
while (*feature) {
if (*feature++ == c)
return *feature;
feature++;
}
return FEATURE_NOEXIST;
}
unsigned long get_deviceid(void)
{
char *deviceid = prom_getenv(DEVICEID);
if (deviceid == NULL)
return *DEV_ID_REG;
else
return str2hex(deviceid);
}
char identify_pci(void)
{
return test_feature(PCI_KEY);
}
EXPORT_SYMBOL(identify_pci);
char identify_pcimux(void)
{
return test_feature(PCIMUX_KEY);
}
char identify_sec(void)
{
return test_feature(SEC_KEY);
}
EXPORT_SYMBOL(identify_sec);
char identify_spad(void)
{
return test_feature(SPAD_KEY);
}
EXPORT_SYMBOL(identify_spad);
char identify_tdm(void)
{
return test_feature(TDM_KEY);
}
EXPORT_SYMBOL(identify_tdm);
char identify_zsp(void)
{
return test_feature(ZSP_KEY);
}
EXPORT_SYMBOL(identify_zsp);
static char identify_enetfeature(char key, unsigned long interface_num)
{
char *feature = get_features();
while (*feature) {
if (*feature++ == key && interface_num-- == 0)
return *feature;
feature++;
}
return FEATURE_NOEXIST;
}
char identify_enet(unsigned long interface_num)
{
return identify_enetfeature(ENET_KEY, interface_num);
}
EXPORT_SYMBOL(identify_enet);
char identify_enetTxD(unsigned long interface_num)
{
return identify_enetfeature(ENETTXD_KEY, interface_num);
}
EXPORT_SYMBOL(identify_enetTxD);
unsigned long identify_family(void)
{
unsigned long deviceid;
deviceid = get_deviceid();
return deviceid & CPU_DEVID_FAMILY;
}
EXPORT_SYMBOL(identify_family);
unsigned long identify_revision(void)
{
unsigned long deviceid;
deviceid = get_deviceid();
return deviceid & CPU_DEVID_REVISION;
}
EXPORT_SYMBOL(identify_revision);
/* PROM environment functions */
char *prom_getenv(char *env_name)
{
/*
* Return a pointer to the given environment variable. prom_envp
* points to a null terminated array of pointers to variables.
* Environment variables are stored in the form of "memsize=64"
*/
char **var = prom_envp;
int i = strlen(env_name);
while (*var) {
if (strncmp(env_name, *var, i) == 0) {
return *var + strlen(env_name) + 1;
}
var++;
}
return NULL;
}
/* PROM commandline functions */
void __init prom_init_cmdline(void)
{
char *cp;
int actr;
actr = 1; /* Always ignore argv[0] */
cp = &(arcs_cmdline[0]);
while (actr < prom_argc) {
strcpy(cp, prom_argv[actr]);
cp += strlen(prom_argv[actr]);
*cp++ = ' ';
actr++;
}
if (cp != &(arcs_cmdline[0])) /* get rid of trailing space */
--cp;
*cp = '\0';
}
/* memory allocation functions */
static int __init prom_memtype_classify(unsigned int type)
{
switch (type) {
case yamon_free:
return BOOT_MEM_RAM;
case yamon_prom:
return BOOT_MEM_ROM_DATA;
default:
return BOOT_MEM_RESERVED;
}
}
void __init prom_meminit(void)
{
struct prom_pmemblock *p;
p = prom_getmdesc();
while (p->size) {
long type;
unsigned long base, size;
type = prom_memtype_classify(p->type);
base = p->base;
size = p->size;
add_memory_region(base, size, type);
p++;
if (type == BOOT_MEM_ROM_DATA) {
if (nr_prom_mem >= MAX_PROM_MEM) {
pr_err("Too many ROM DATA regions");
continue;
}
prom_mem_base[nr_prom_mem] = base;
prom_mem_size[nr_prom_mem] = size;
nr_prom_mem++;
}
}
}
void __init prom_free_prom_memory(void)
{
int argc;
char **argv;
char **envp;
char *ptr;
int len = 0;
int i;
/*
* preserve environment variables and command line from pmon/bbload
* first preserve the command line
*/
for (argc = 0; argc < prom_argc; argc++) {
len += sizeof(char *); /* length of pointer */
len += strlen(prom_argv[argc]) + 1; /* length of string */
}
len += sizeof(char *); /* plus length of null pointer */
argv = kmalloc(len, GFP_KERNEL);
ptr = (char *) &argv[prom_argc + 1]; /* strings follow array */
for (argc = 0; argc < prom_argc; argc++) {
argv[argc] = ptr;
strcpy(ptr, prom_argv[argc]);
ptr += strlen(prom_argv[argc]) + 1;
}
argv[prom_argc] = NULL; /* end array with null pointer */
prom_argv = argv;
/* next preserve the environment variables */
len = 0;
i = 0;
for (envp = prom_envp; *envp != NULL; envp++) {
i++; /* count number of environment variables */
len += sizeof(char *); /* length of pointer */
len += strlen(*envp) + 1; /* length of string */
}
len += sizeof(char *); /* plus length of null pointer */
envp = kmalloc(len, GFP_KERNEL);
ptr = (char *) &envp[i+1];
for (argc = 0; argc < i; argc++) {
envp[argc] = ptr;
strcpy(ptr, prom_envp[argc]);
ptr += strlen(prom_envp[argc]) + 1;
}
envp[i] = NULL; /* end array with null pointer */
prom_envp = envp;
for (i = 0; i < nr_prom_mem; i++) {
free_init_pages("prom memory",
prom_mem_base[i], prom_mem_base[i] + prom_mem_size[i]);
}
}
struct prom_pmemblock *__init prom_getmdesc(void)
{
static char memsz_env[] __initdata = "memsize";
static char heaptop_env[] __initdata = "heaptop";
char *str;
unsigned int memsize;
unsigned int heaptop;
int i;
str = prom_getenv(memsz_env);
if (!str) {
ppfinit("memsize not set in boot prom, "
"set to default (32Mb)\n");
memsize = 0x02000000;
} else {
memsize = simple_strtol(str, NULL, 0);
if (memsize == 0) {
/* if memsize is a bad size, use reasonable default */
memsize = 0x02000000;
}
/* convert to physical address (removing caching bits, etc) */
memsize = CPHYSADDR(memsize);
}
str = prom_getenv(heaptop_env);
if (!str) {
heaptop = CPHYSADDR((u32)&_text);
ppfinit("heaptop not set in boot prom, "
"set to default 0x%08x\n", heaptop);
} else {
heaptop = simple_strtol(str, NULL, 16);
if (heaptop == 0) {
/* heaptop conversion bad, might have 0xValue */
heaptop = simple_strtol(str, NULL, 0);
if (heaptop == 0) {
/* heaptop still bad, use reasonable default */
heaptop = CPHYSADDR((u32)&_text);
}
}
/* convert to physical address (removing caching bits, etc) */
heaptop = CPHYSADDR((u32)heaptop);
}
/* the base region */
i = 0;
mdesc[i].type = BOOT_MEM_RESERVED;
mdesc[i].base = 0x00000000;
mdesc[i].size = PAGE_ALIGN(0x300 + 0x80);
/* jtag interrupt vector + sizeof vector */
/* PMON data */
if (heaptop > mdesc[i].base + mdesc[i].size) {
i++; /* 1 */
mdesc[i].type = BOOT_MEM_ROM_DATA;
mdesc[i].base = mdesc[i-1].base + mdesc[i-1].size;
mdesc[i].size = heaptop - mdesc[i].base;
}
/* end of PMON data to start of kernel -- probably zero .. */
if (heaptop != CPHYSADDR((u32)_text)) {
i++; /* 2 */
mdesc[i].type = BOOT_MEM_RAM;
mdesc[i].base = heaptop;
mdesc[i].size = CPHYSADDR((u32)_text) - mdesc[i].base;
}
/* kernel proper */
i++; /* 3 */
mdesc[i].type = BOOT_MEM_RESERVED;
mdesc[i].base = CPHYSADDR((u32)_text);
mdesc[i].size = CPHYSADDR(PAGE_ALIGN((u32)_end)) - mdesc[i].base;
/* Remainder of RAM -- under memsize */
i++; /* 5 */
mdesc[i].type = yamon_free;
mdesc[i].base = mdesc[i-1].base + mdesc[i-1].size;
mdesc[i].size = memsize - mdesc[i].base;
return &mdesc[0];
}
arch/mips/pmcs-msp71xx/msp_serial.c deleted 100644 → 0
View file @ 10760dde
/*
* The setup file for serial related hardware on PMC-Sierra MSP processors.
*
* Copyright 2005 PMC-Sierra, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/serial.h>
#include <linux/serial_core.h>
#include <linux/serial_reg.h>
#include <linux/slab.h>
#include <asm/bootinfo.h>
#include <asm/io.h>
#include <asm/processor.h>
#include <asm/serial.h>
#include <linux/serial_8250.h>
#include <msp_prom.h>
#include <msp_int.h>
#include <msp_regs.h>
struct msp_uart_data {
int last_lcr;
};
static void msp_serial_out(struct uart_port *p, int offset, int value)
{
struct msp_uart_data *d = p->private_data;
if (offset == UART_LCR)
d->last_lcr = value;
offset <<= p->regshift;
writeb(value, p->membase + offset);
}
static unsigned int msp_serial_in(struct uart_port *p, int offset)
{
offset <<= p->regshift;
return readb(p->membase + offset);
}
static int msp_serial_handle_irq(struct uart_port *p)
{
struct msp_uart_data *d = p->private_data;
unsigned int iir = readb(p->membase + (UART_IIR << p->regshift));
if (serial8250_handle_irq(p, iir)) {
return 1;
} else if ((iir & UART_IIR_BUSY) == UART_IIR_BUSY) {
/*
* The DesignWare APB UART has an Busy Detect (0x07) interrupt
* meaning an LCR write attempt occurred while the UART was
* busy. The interrupt must be cleared by reading the UART
* status register (USR) and the LCR re-written.
*
* Note: MSP reserves 0x20 bytes of address space for the UART
* and the USR is mapped in a separate block at an offset of
* 0xc0 from the start of the UART.
*/
(void)readb(p->membase + 0xc0);
writeb(d->last_lcr, p->membase + (UART_LCR << p->regshift));
return 1;
}
return 0;
}
void __init msp_serial_setup(void)
{
char *s;
char *endp;
struct uart_port up;
unsigned int uartclk;
memset(&up, 0, sizeof(up));
/* Check if clock was specified in environment */
s = prom_getenv("uartfreqhz");
if(!(s && *s && (uartclk = simple_strtoul(s, &endp, 10)) && *endp == 0))
uartclk = MSP_BASE_BAUD;
ppfinit("UART clock set to %d\n", uartclk);
/* Initialize first serial port */
up.mapbase = MSP_UART0_BASE;
up.membase = ioremap(up.mapbase, MSP_UART_REG_LEN);
up.irq = MSP_INT_UART0;
up.uartclk = uartclk;
up.regshift = 2;
up.iotype = UPIO_MEM;
up.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
up.type = PORT_16550A;
up.line = 0;
up.serial_out = msp_serial_out;
up.serial_in = msp_serial_in;
up.handle_irq = msp_serial_handle_irq;
up.private_data = kzalloc(sizeof(struct msp_uart_data), GFP_KERNEL);
if (!up.private_data) {
pr_err("failed to allocate uart private data\n");
return;
}
if (early_serial_setup(&up)) {
kfree(up.private_data);
pr_err("Early serial init of port 0 failed\n");
}
/* Initialize the second serial port, if one exists */
switch (mips_machtype) {
case MACH_MSP4200_EVAL:
case MACH_MSP4200_GW:
case MACH_MSP4200_FPGA:
case MACH_MSP7120_EVAL:
case MACH_MSP7120_GW:
case MACH_MSP7120_FPGA:
/* Enable UART1 on MSP4200 and MSP7120 */
*GPIO_CFG2_REG = 0x00002299;
break;
default:
return; /* No second serial port, good-bye. */
}
up.mapbase = MSP_UART1_BASE;
up.membase = ioremap(up.mapbase, MSP_UART_REG_LEN);
up.irq = MSP_INT_UART1;
up.line = 1;
up.private_data = (void*)UART1_STATUS_REG;
if (early_serial_setup(&up)) {
kfree(up.private_data);
pr_err("Early serial init of port 1 failed\n");
}
}
arch/mips/pmcs-msp71xx/msp_setup.c deleted 100644 → 0
View file @ 10760dde
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* The generic setup file for PMC-Sierra MSP processors
*
* Copyright 2005-2007 PMC-Sierra, Inc,
* Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
*/
#include <linux/delay.h>
#include <asm/bootinfo.h>
#include <asm/cacheflush.h>
#include <asm/idle.h>
#include <asm/r4kcache.h>
#include <asm/reboot.h>
#include <asm/smp-ops.h>
#include <asm/time.h>
#include <msp_prom.h>
#include <msp_regs.h>
#if defined(CONFIG_PMC_MSP7120_GW)
#include <msp_regops.h>
#define MSP_BOARD_RESET_GPIO 9
#endif
extern void msp_serial_setup(void);
#if defined(CONFIG_PMC_MSP7120_EVAL) || \
defined(CONFIG_PMC_MSP7120_GW) || \
defined(CONFIG_PMC_MSP7120_FPGA)
/*
* Performs the reset for MSP7120-based boards
*/
void msp7120_reset(void)
{
void *start, *end, *iptr;
/* Diasble all interrupts */
local_irq_disable();
#ifdef CONFIG_SYS_SUPPORTS_MULTITHREADING
dvpe();
#endif
/* Cache the reset code of this function */
__asm__ __volatile__ (
" .set push \n"
" .set arch=r4000 \n"
" la %0,startpoint \n"
" la %1,endpoint \n"
" .set pop \n"
: "=r" (start), "=r" (end)
:
);
for (iptr = (void *)((unsigned int)start & ~(L1_CACHE_BYTES - 1));
iptr < end; iptr += L1_CACHE_BYTES)
cache_op(Fill_I, iptr);
__asm__ __volatile__ (
"startpoint: \n"
);
/* Put the DDRC into self-refresh mode */
DDRC_INDIRECT_WRITE(DDRC_CTL(10), 0xb, 1 << 16);
/*
* IMPORTANT!
* DO NOT do anything from here on out that might even
* think about fetching from RAM - i.e., don't call any
* non-inlined functions, and be VERY sure that any inline
* functions you do call do NOT access any sort of RAM
* anywhere!
*/
/* Wait a bit for the DDRC to settle */
mdelay(125);
#if defined(CONFIG_PMC_MSP7120_GW)
/*
* Set GPIO 9 HI, (tied to board reset logic)
* GPIO 9 is the 4th GPIO of register 3
*
* NOTE: We cannot use the higher-level msp_gpio_mode()/out()
* as GPIO char driver may not be enabled and it would look up
* data inRAM!
*/
set_value_reg32(GPIO_CFG3_REG, 0xf000, 0x8000);
set_reg32(GPIO_DATA3_REG, 8);
/*
* In case GPIO9 doesn't reset the board (jumper configurable!)
* fallback to device reset below.
*/
#endif
/* Set bit 1 of the MSP7120 reset register */
*RST_SET_REG = 0x00000001;
__asm__ __volatile__ (
"endpoint: \n"
);
}
#endif
void msp_restart(char *command)
{
printk(KERN_WARNING "Now rebooting .......\n");
#if defined(CONFIG_PMC_MSP7120_EVAL) || \
defined(CONFIG_PMC_MSP7120_GW) || \
defined(CONFIG_PMC_MSP7120_FPGA)
msp7120_reset();
#else
/* No chip-specific reset code, just jump to the ROM reset vector */
set_c0_status(ST0_BEV | ST0_ERL);
change_c0_config(CONF_CM_CMASK, CONF_CM_UNCACHED);
__flush_cache_all();
write_c0_wired(0);
__asm__ __volatile__("jr\t%0"::"r"(0xbfc00000));
#endif
}
void msp_halt(void)
{
printk(KERN_WARNING "\n** You can safely turn off the power\n");
while (1)
/* If possible call official function to get CPU WARs */
if (cpu_wait)
(*cpu_wait)();
else
__asm__(".set\tmips3\n\t" "wait\n\t" ".set\tmips0");
}
void msp_power_off(void)
{
msp_halt();
}
void __init plat_mem_setup(void)
{
_machine_restart = msp_restart;
_machine_halt = msp_halt;
pm_power_off = msp_power_off;
}
void __init prom_init(void)
{
unsigned long family;
unsigned long revision;
prom_argc = fw_arg0;
prom_argv = (char **)fw_arg1;
prom_envp = (char **)fw_arg2;
/*
* Someday we can use this with PMON2000 to get a
* platform call prom routines for output etc. without
* having to use grody hacks. For now it's unused.
*
* struct callvectors *cv = (struct callvectors *) fw_arg3;
*/
family = identify_family();
revision = identify_revision();
switch (family) {
case FAMILY_FPGA:
if (FPGA_IS_MSP4200(revision)) {
/* Old-style revision ID */
mips_machtype = MACH_MSP4200_FPGA;
} else {
mips_machtype = MACH_MSP_OTHER;
}
break;
case FAMILY_MSP4200:
#if defined(CONFIG_PMC_MSP4200_EVAL)
mips_machtype = MACH_MSP4200_EVAL;
#elif defined(CONFIG_PMC_MSP4200_GW)
mips_machtype = MACH_MSP4200_GW;
#else
mips_machtype = MACH_MSP_OTHER;
#endif
break;
case FAMILY_MSP4200_FPGA:
mips_machtype = MACH_MSP4200_FPGA;
break;
case FAMILY_MSP7100:
#if defined(CONFIG_PMC_MSP7120_EVAL)
mips_machtype = MACH_MSP7120_EVAL;
#elif defined(CONFIG_PMC_MSP7120_GW)
mips_machtype = MACH_MSP7120_GW;
#else
mips_machtype = MACH_MSP_OTHER;
#endif
break;
case FAMILY_MSP7100_FPGA:
mips_machtype = MACH_MSP7120_FPGA;
break;
default:
/* we don't recognize the machine */
mips_machtype = MACH_UNKNOWN;
panic("***Bogosity factor five***, exiting");
break;
}
prom_init_cmdline();
prom_meminit();
/*
* Sub-system setup follows.
* Setup functions can either be called here or using the
* subsys_initcall mechanism (i.e. see msp_pci_setup). The
* order in which they are called can be changed by using the
* link order in arch/mips/pmc-sierra/msp71xx/Makefile.
*
* NOTE: Please keep sub-system specific initialization code
* in separate specific files.
*/
msp_serial_setup();
register_vsmp_smp_ops();
}
arch/mips/pmcs-msp71xx/msp_smp.c deleted 100644 → 0
View file @ 10760dde
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2000, 2001, 2004 MIPS Technologies, Inc.
* Copyright (C) 2001 Ralf Baechle
* Copyright (C) 2010 PMC-Sierra, Inc.
*
* VSMP support for MSP platforms . Derived from malta vsmp support.
*/
#include <linux/smp.h>
#include <linux/interrupt.h>
#include <asm/setup.h>
#ifdef CONFIG_MIPS_MT_SMP
#define MIPS_CPU_IPI_RESCHED_IRQ 0 /* SW int 0 for resched */
#define MIPS_CPU_IPI_CALL_IRQ 1 /* SW int 1 for call */
static void ipi_resched_dispatch(void)
{
do_IRQ(MIPS_CPU_IPI_RESCHED_IRQ);
}
static void ipi_call_dispatch(void)
{
do_IRQ(MIPS_CPU_IPI_CALL_IRQ);
}
static irqreturn_t ipi_resched_interrupt(int irq, void *dev_id)
{
return IRQ_HANDLED;
}
static irqreturn_t ipi_call_interrupt(int irq, void *dev_id)
{
generic_smp_call_function_interrupt();
return IRQ_HANDLED;
}
void __init arch_init_ipiirq(int irq, const char *name, irq_handler_t handler)
{
if (request_irq(irq, handler, IRQF_PERCPU, name, NULL))
pr_err("Failed to request irq %d (%s)\n", irq, name);
irq_set_handler(irq, handle_percpu_irq);
}
void __init msp_vsmp_int_init(void)
{
set_vi_handler(MIPS_CPU_IPI_RESCHED_IRQ, ipi_resched_dispatch);
set_vi_handler(MIPS_CPU_IPI_CALL_IRQ, ipi_call_dispatch);
arch_init_ipiirq(MIPS_CPU_IPI_RESCHED_IRQ, "IPI_resched",
ipi_resched_interrupt);
arch_init_ipiirq(MIPS_CPU_IPI_CALL_IRQ, "IPI_call", ipi_call_interrupt);
}
#endif /* CONFIG_MIPS_MT_SMP */
arch/mips/pmcs-msp71xx/msp_time.c deleted 100644 → 0
View file @ 10760dde
// SPDX-License-Identifier: GPL-2.0-only
/*
* Setting up the clock on MSP SOCs. No RTC typically.
*
* Carsten Langgaard, carstenl@mips.com
* Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
*
* ########################################################################
*
* ########################################################################
*/
#include <linux/init.h>
#include <linux/kernel_stat.h>
#include <linux/sched.h>
#include <linux/spinlock.h>
#include <linux/ptrace.h>
#include <asm/cevt-r4k.h>
#include <asm/mipsregs.h>
#include <asm/time.h>
#include <msp_prom.h>
#include <msp_int.h>
#include <msp_regs.h>
#define get_current_vpe() \
((read_c0_tcbind() >> TCBIND_CURVPE_SHIFT) & TCBIND_CURVPE)
static int tim_installed;
void __init plat_time_init(void)
{
char *endp, *s;
unsigned long cpu_rate = 0;
if (cpu_rate == 0) {
s = prom_getenv("clkfreqhz");
cpu_rate = simple_strtoul(s, &endp, 10);
if (endp != NULL && *endp != 0) {
printk(KERN_ERR
"Clock rate in Hz parse error: %s\n", s);
cpu_rate = 0;
}
}
if (cpu_rate == 0) {
s = prom_getenv("clkfreq");
cpu_rate = 1000 * simple_strtoul(s, &endp, 10);
if (endp != NULL && *endp != 0) {
printk(KERN_ERR
"Clock rate in MHz parse error: %s\n", s);
cpu_rate = 0;
}
}
if (cpu_rate == 0) {
#if defined(CONFIG_PMC_MSP7120_EVAL) \
|| defined(CONFIG_PMC_MSP7120_GW)
cpu_rate = 400000000;
#elif defined(CONFIG_PMC_MSP7120_FPGA)
cpu_rate = 25000000;
#else
cpu_rate = 150000000;
#endif
printk(KERN_ERR
"Failed to determine CPU clock rate, "
"assuming %ld hz ...\n", cpu_rate);
}
printk(KERN_WARNING "Clock rate set to %ld\n", cpu_rate);
/* timer frequency is 1/2 clock rate */
mips_hpt_frequency = cpu_rate/2;
}
unsigned int get_c0_compare_int(void)
{
unsigned long flags = IRQF_PERCPU | IRQF_TIMER | IRQF_SHARED;
/* MIPS_MT modes may want timer for second VPE */
if ((get_current_vpe()) && !tim_installed) {
if (request_irq(MSP_INT_VPE1_TIMER, c0_compare_interrupt, flags,
"timer", c0_compare_interrupt))
pr_err("Failed to register timer interrupt\n");
tim_installed++;
}
return get_current_vpe() ? MSP_INT_VPE1_TIMER : MSP_INT_VPE0_TIMER;
}
arch/mips/pmcs-msp71xx/msp_usb.c deleted 100644 → 0
View file @ 10760dde
/*
* The setup file for USB related hardware on PMC-Sierra MSP processors.
*
* Copyright 2006 PMC-Sierra, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#if defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_GADGET)
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/platform_device.h>
#include <asm/mipsregs.h>
#include <msp_regs.h>
#include <msp_int.h>
#include <msp_prom.h>
#include <msp_usb.h>
#if defined(CONFIG_USB_EHCI_HCD)
static struct resource msp_usbhost0_resources[] = {
[0] = { /* EHCI-HS operational and capabilities registers */
.start = MSP_USB0_HS_START,
.end = MSP_USB0_HS_END,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = MSP_INT_USB,
.end = MSP_INT_USB,
.flags = IORESOURCE_IRQ,
},
[2] = { /* MSBus-to-AMBA bridge register space */
.start = MSP_USB0_MAB_START,
.end = MSP_USB0_MAB_END,
.flags = IORESOURCE_MEM,
},
[3] = { /* Identification and general hardware parameters */
.start = MSP_USB0_ID_START,
.end = MSP_USB0_ID_END,
.flags = IORESOURCE_MEM,
},
};
static u64 msp_usbhost0_dma_mask = 0xffffffffUL;
static struct mspusb_device msp_usbhost0_device = {
.dev = {
.name = "pmcmsp-ehci",
.id = 0,
.dev = {
.dma_mask = &msp_usbhost0_dma_mask,
.coherent_dma_mask = 0xffffffffUL,
},
.num_resources = ARRAY_SIZE(msp_usbhost0_resources),
.resource = msp_usbhost0_resources,
},
};
#endif /* CONFIG_USB_EHCI_HCD */
#if defined(CONFIG_USB_GADGET)
static struct resource msp_usbdev0_resources[] = {
[0] = { /* EHCI-HS operational and capabilities registers */
.start = MSP_USB0_HS_START,
.end = MSP_USB0_HS_END,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = MSP_INT_USB,
.end = MSP_INT_USB,
.flags = IORESOURCE_IRQ,
},
[2] = { /* MSBus-to-AMBA bridge register space */
.start = MSP_USB0_MAB_START,
.end = MSP_USB0_MAB_END,
.flags = IORESOURCE_MEM,
},
[3] = { /* Identification and general hardware parameters */
.start = MSP_USB0_ID_START,
.end = MSP_USB0_ID_END,
.flags = IORESOURCE_MEM,
},
};
static u64 msp_usbdev_dma_mask = 0xffffffffUL;
/* This may need to be converted to a mspusb_device, too. */
static struct mspusb_device msp_usbdev0_device = {
.dev = {
.name = "msp71xx_udc",
.id = 0,
.dev = {
.dma_mask = &msp_usbdev_dma_mask,
.coherent_dma_mask = 0xffffffffUL,
},
.num_resources = ARRAY_SIZE(msp_usbdev0_resources),
.resource = msp_usbdev0_resources,
},
};
#endif /* CONFIG_USB_GADGET */
static int __init msp_usb_setup(void)
{
char *strp;
char envstr[32];
struct platform_device *msp_devs[NUM_USB_DEVS];
unsigned int val;
/* construct environment name usbmode */
/* set usbmode <host/device> as pmon environment var */
/*
* Could this perhaps be integrated into the "features" env var?
* Use the features key "U", and follow with "H" for host-mode,
* "D" for device-mode. If it works for Ethernet, why not USB...
* -- hammtrev, 2007/03/22
*/
snprintf(&envstr[0], sizeof(envstr), "usbmode");
/* set default host mode */
val = 1;
/* get environment string */
strp = prom_getenv(&envstr[0]);
if (strp) {
/* compare string */
if (!strcmp(strp, "device"))
val = 0;
}
if (val) {
#if defined(CONFIG_USB_EHCI_HCD)
msp_devs[0] = &msp_usbhost0_device.dev;
ppfinit("platform add USB HOST done %s.\n", msp_devs[0]->name);
#else
ppfinit("%s: echi_hcd not supported\n", __FILE__);
#endif /* CONFIG_USB_EHCI_HCD */
} else {
#if defined(CONFIG_USB_GADGET)
/* get device mode structure */
msp_devs[0] = &msp_usbdev0_device.dev;
ppfinit("platform add USB DEVICE done %s.\n"
, msp_devs[0]->name);
#else
ppfinit("%s: usb_gadget not supported\n", __FILE__);
#endif /* CONFIG_USB_GADGET */
}
/* add device */
platform_add_devices(msp_devs, ARRAY_SIZE(msp_devs));
return 0;
}
subsys_initcall(msp_usb_setup);
#endif /* CONFIG_USB_EHCI_HCD || CONFIG_USB_GADGET */
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7