ARM: dts: UniPhier: add on-chip UART device nodes

The UniPhier on-chip UART driver was merged into the mainline by
commit 1a8d2903 ("serial: 8250_uniphier: add UniPhier serial
driver").

Add device nodes to make it really available.

We no longer have to depend on the on-board UART device (16550A),
so let's change the chosen and aliases to point to the on-chip ones.
Also, turn on the on-board Ethernet device.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

arch/arm/boot/dts/uniphier-ph1-ld4-ref.dts

@@ -57,11 +57,14 @@ memory {
 
 	chosen {
 		bootargs = "console=ttyS0,115200";
-		stdout-path = &serialsc;
+		stdout-path = &serial0;
 	};
 
 	aliases {
-		serial0 = &serialsc;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
 	};
 };
 
@@ -74,6 +77,18 @@ &support_card {
 	ranges = <0x00000000 1 0x03f00000 0x00100000>;
 };
 
-&serialsc {
+&ethsc {
 	interrupts = <0 49 4>;
 };
+
+&serial0 {
+	status = "okay";
+};
+
+&serial2 {
+	status = "okay";
+};
+
+&serial3 {
+	status = "okay";
+};

arch/arm/boot/dts/uniphier-ph1-ld4.dtsi

@@ -64,6 +64,12 @@ arm_timer_clk: arm_timer_clk {
 			compatible = "fixed-clock";
 			clock-frequency = <50000000>;
 		};
+
+		uart_clk: uart_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <36864000>;
+		};
 	};
 
 	soc {
@@ -79,6 +85,42 @@ extbus: extbus {
 			#size-cells = <1>;
 		};
 
+		serial0: serial@54006800 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006800 0x40>;
+			interrupts = <0 33 4>;
+			clocks = <&uart_clk>;
+			fifo-size = <64>;
+		};
+
+		serial1: serial@54006900 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006900 0x40>;
+			interrupts = <0 35 4>;
+			clocks = <&uart_clk>;
+			fifo-size = <64>;
+		};
+
+		serial2: serial@54006a00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006a00 0x40>;
+			interrupts = <0 37 4>;
+			clocks = <&uart_clk>;
+			fifo-size = <64>;
+		};
+
+		serial3: serial@54006b00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006b00 0x40>;
+			interrupts = <0 29 4>;
+			clocks = <&uart_clk>;
+			fifo-size = <64>;
+		};
+
 		system-bus-controller-misc@59800000 {
 			compatible = "socionext,uniphier-system-bus-controller-misc",
 				     "syscon";

arch/arm/boot/dts/uniphier-ph1-pro4-ref.dts

@@ -57,11 +57,14 @@ memory {
 
 	chosen {
 		bootargs = "console=ttyS0,115200";
-		stdout-path = &serialsc;
+		stdout-path = &serial0;
 	};
 
 	aliases {
-		serial0 = &serialsc;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
 	};
 };
 
@@ -74,6 +77,18 @@ &support_card {
 	ranges = <0x00000000 1 0x03f00000 0x00100000>;
 };
 
-&serialsc {
+&ethsc {
 	interrupts = <0 50 4>;
 };
+
+&serial0 {
+	status = "okay";
+};
+
+&serial1 {
+	status = "okay";
+};
+
+&serial2 {
+	status = "okay";
+};

arch/arm/boot/dts/uniphier-ph1-pro4.dtsi

@@ -71,6 +71,12 @@ arm_timer_clk: arm_timer_clk {
 			compatible = "fixed-clock";
 			clock-frequency = <50000000>;
 		};
+
+		uart_clk: uart_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <73728000>;
+		};
 	};
 
 	soc {
@@ -86,6 +92,42 @@ extbus: extbus {
 			#size-cells = <1>;
 		};
 
+		serial0: serial@54006800 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006800 0x40>;
+			interrupts = <0 33 4>;
+			clocks = <&uart_clk>;
+			fifo-size = <64>;
+		};
+
+		serial1: serial@54006900 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006900 0x40>;
+			interrupts = <0 35 4>;
+			clocks = <&uart_clk>;
+			fifo-size = <64>;
+		};
+
+		serial2: serial@54006a00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006a00 0x40>;
+			interrupts = <0 37 4>;
+			clocks = <&uart_clk>;
+			fifo-size = <64>;
+		};
+
+		serial3: serial@54006b00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006b00 0x40>;
+			interrupts = <0 29 4>;
+			clocks = <&uart_clk>;
+			fifo-size = <64>;
+		};
+
 		system-bus-controller-misc@59800000 {
 			compatible = "socionext,uniphier-system-bus-controller-misc",
 				     "syscon";

arch/arm/boot/dts/uniphier-ph1-sld3-ref.dts

@@ -58,11 +58,13 @@ memory {
 
 	chosen {
 		bootargs = "console=ttyS0,115200";
-		stdout-path = &serialsc;
+		stdout-path = &serial0;
 	};
 
 	aliases {
-		serial0 = &serialsc;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
 	};
 };
 
@@ -75,6 +77,18 @@ &support_card {
 	ranges = <0x00000000 1 0x03f00000 0x00100000>;
 };
 
-&serialsc {
+&ethsc {
 	interrupts = <0 49 4>;
 };
+
+&serial0 {
+	status = "okay";
+};
+
+&serial1 {
+	status = "okay";
+};
+
+&serial2 {
+	status = "okay";
+};

arch/arm/boot/dts/uniphier-ph1-sld3.dtsi

@@ -71,6 +71,12 @@ arm_timer_clk: arm_timer_clk {
 			compatible = "fixed-clock";
 			clock-frequency = <50000000>;
 		};
+
+		uart_clk: uart_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <36864000>;
+		};
 	};
 
 	soc {
@@ -108,6 +114,33 @@ intc: interrupt-controller@20001000 {
 			      <0x20000100 0x100>;
 		};
 
+		serial0: serial@54006800 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006800 0x40>;
+			interrupts = <0 33 4>;
+			clocks = <&uart_clk>;
+			fifo-size = <64>;
+		};
+
+		serial1: serial@54006900 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006900 0x40>;
+			interrupts = <0 35 4>;
+			clocks = <&uart_clk>;
+			fifo-size = <64>;
+		};
+
+		serial2: serial@54006a00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006a00 0x40>;
+			interrupts = <0 37 4>;
+			clocks = <&uart_clk>;
+			fifo-size = <64>;
+		};
+
 		system-bus-controller-misc@59800000 {
 			compatible = "socionext,uniphier-system-bus-controller-misc",
 				     "syscon";

arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts

@@ -57,11 +57,14 @@ memory {
 
 	chosen {
 		bootargs = "console=ttyS0,115200";
-		stdout-path = &serialsc;
+		stdout-path = &serial0;
 	};
 
 	aliases {
-		serial0 = &serialsc;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
 	};
 };
 
@@ -74,6 +77,18 @@ &support_card {
 	ranges = <0x00000000 1 0x03f00000 0x00100000>;
 };
 
-&serialsc {
+&ethsc {
 	interrupts = <0 48 4>;
 };
+
+&serial0 {
+	status = "okay";
+};
+
+&serial2 {
+	status = "okay";
+};
+
+&serial3 {
+	status = "okay";
+};

arch/arm/boot/dts/uniphier-ph1-sld8.dtsi

@@ -64,6 +64,12 @@ arm_timer_clk: arm_timer_clk {
 			compatible = "fixed-clock";
 			clock-frequency = <50000000>;
 		};
+
+		uart_clk: uart_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <80000000>;
+		};
 	};
 
 	soc {
@@ -79,6 +85,42 @@ extbus: extbus {
 			#size-cells = <1>;
 		};
 
+		serial0: serial@54006800 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006800 0x40>;
+			interrupts = <0 33 4>;
+			clocks = <&uart_clk>;
+			fifo-size = <64>;
+		};
+
+		serial1: serial@54006900 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006900 0x40>;
+			interrupts = <0 35 4>;
+			clocks = <&uart_clk>;
+			fifo-size = <64>;
+		};
+
+		serial2: serial@54006a00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006a00 0x40>;
+			interrupts = <0 37 4>;
+			clocks = <&uart_clk>;
+			fifo-size = <64>;
+		};
+
+		serial3: serial@54006b00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006b00 0x40>;
+			interrupts = <0 29 4>;
+			clocks = <&uart_clk>;
+			fifo-size = <64>;
+		};
+
 		system-bus-controller-misc@59800000 {
 			compatible = "socionext,uniphier-system-bus-controller-misc",
 				     "syscon";