rtlwifi: Add Support VHT to spec_ver

We are going to add 8822be, which is a VHT 2x2 wifi chip, so add VHT flag
to replace enumeration of chips.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

drivers/net/wireless/realtek/rtlwifi/base.c

@@ -244,6 +244,9 @@ static void _rtl_init_hw_vht_capab(struct ieee80211_hw *hw,
 	struct rtl_priv *rtlpriv = rtl_priv(hw);
 	struct rtl_hal *rtlhal = rtl_hal(rtlpriv);
 
+	if (!(rtlpriv->cfg->spec_ver & RTL_SPEC_SUPPORT_VHT))
+		return;
+
 	if (rtlhal->hw_type == HARDWARE_TYPE_RTL8812AE ||
 	    rtlhal->hw_type == HARDWARE_TYPE_RTL8822BE) {
 		u16 mcs_map;
@@ -887,8 +890,7 @@ static void _rtl_query_bandwidth_mode(struct ieee80211_hw *hw,
 
 	tcb_desc->packet_bw = HT_CHANNEL_WIDTH_20_40;
 
-	if (rtlpriv->rtlhal.hw_type == HARDWARE_TYPE_RTL8812AE ||
-	    rtlpriv->rtlhal.hw_type == HARDWARE_TYPE_RTL8821AE) {
+	if (rtlpriv->cfg->spec_ver & RTL_SPEC_SUPPORT_VHT) {
 		if (mac->opmode == NL80211_IFTYPE_AP ||
 		    mac->opmode == NL80211_IFTYPE_ADHOC ||
 		    mac->opmode == NL80211_IFTYPE_MESH_POINT) {

drivers/net/wireless/realtek/rtlwifi/rtl8821ae/sw.c

@@ -328,6 +328,7 @@ static const struct rtl_hal_cfg rtl8821ae_hal_cfg = {
 	.alt_fw_name = "rtlwifi/rtl8821aefw.bin",
 	.ops = &rtl8821ae_hal_ops,
 	.mod_params = &rtl8821ae_mod_params,
+	.spec_ver = RTL_SPEC_SUPPORT_VHT,
 	.maps[SYS_ISO_CTRL] = REG_SYS_ISO_CTRL,
 	.maps[SYS_FUNC_EN] = REG_SYS_FUNC_EN,
 	.maps[SYS_CLK] = REG_SYS_CLKR,

drivers/net/wireless/realtek/rtlwifi/wifi.h

@@ -952,6 +952,7 @@ enum package_type {
 
 enum rtl_spec_ver {
 	RTL_SPEC_NEW_RATEID = BIT(0),	/* use ratr_table_mode_new */
+	RTL_SPEC_SUPPORT_VHT = BIT(1),	/* support VHT */
 };
 
 struct octet_string {