ath9k_htc: reconfigure led_gpios after resume

On suspend/resume, firmware will restart and gpios
configuration will be reseted. Restore this
configureation at least for LEDs
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

drivers/net/wireless/ath/ath9k/htc.h

@@ -600,10 +600,15 @@ void ath9k_htc_rfkill_poll_state(struct ieee80211_hw *hw);
 struct base_eep_header *ath9k_htc_get_eeprom_base(struct ath9k_htc_priv *priv);
 
 #ifdef CONFIG_MAC80211_LEDS
+void ath9k_configure_leds(struct ath9k_htc_priv *priv);
 void ath9k_init_leds(struct ath9k_htc_priv *priv);
 void ath9k_deinit_leds(struct ath9k_htc_priv *priv);
 void ath9k_led_work(struct work_struct *work);
 #else
+static inline void ath9k_configure_leds(struct ath9k_htc_priv *priv)
+{
+}
+
 static inline void ath9k_init_leds(struct ath9k_htc_priv *priv)
 {
 }

drivers/net/wireless/ath/ath9k/htc_drv_gpio.c

@@ -255,6 +255,17 @@ void ath9k_deinit_leds(struct ath9k_htc_priv *priv)
 	cancel_work_sync(&priv->led_work);
 }
 
+
+void ath9k_configure_leds(struct ath9k_htc_priv *priv)
+{
+	/* Configure gpio 1 for output */
+	ath9k_hw_cfg_output(priv->ah, priv->ah->led_pin,
+			    AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
+	/* LED off, active low */
+	ath9k_hw_set_gpio(priv->ah, priv->ah->led_pin, 1);
+
+}
+
 void ath9k_init_leds(struct ath9k_htc_priv *priv)
 {
 	int ret;
@@ -268,11 +279,7 @@ void ath9k_init_leds(struct ath9k_htc_priv *priv)
 	else
 		priv->ah->led_pin = ATH_LED_PIN_DEF;
 
-	/* Configure gpio 1 for output */
-	ath9k_hw_cfg_output(priv->ah, priv->ah->led_pin,
-			    AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
-	/* LED off, active low */
-	ath9k_hw_set_gpio(priv->ah, priv->ah->led_pin, 1);
+	ath9k_configure_leds(priv);
 
 	snprintf(priv->led_name, sizeof(priv->led_name),
 		"ath9k_htc-%s", wiphy_name(priv->hw->wiphy));

drivers/net/wireless/ath/ath9k/htc_drv_init.c

@@ -1000,6 +1000,8 @@ int ath9k_htc_resume(struct htc_target *htc_handle)
 
 	ret = ath9k_init_htc_services(priv, priv->ah->hw_version.devid,
 				      priv->ah->hw_version.usbdev);
+	ath9k_configure_leds(priv);
+
 	return ret;
 }
 #endif