Merge tag 'phy-fixes-5.17' into next

Merge phy fixes for 5.17 into next branch to resolve the conflict
between fixes and next for upcoming patches

drivers/gpu/drm/bridge/nwl-dsi.c

@@ -7,6 +7,7 @@
  */
 
 #include <linux/bitfield.h>
+#include <linux/bits.h>
 #include <linux/clk.h>
 #include <linux/irq.h>
 #include <linux/math64.h>
@@ -196,12 +197,9 @@ static u32 ps2bc(struct nwl_dsi *dsi, unsigned long long ps)
 /*
  * ui2bc - UI time periods to byte clock cycles
  */
-static u32 ui2bc(struct nwl_dsi *dsi, unsigned long long ui)
+static u32 ui2bc(unsigned int ui)
 {
-	u32 bpp = mipi_dsi_pixel_format_to_bpp(dsi->format);
-
-	return DIV64_U64_ROUND_UP(ui * dsi->lanes,
-				  dsi->mode.clock * 1000 * bpp);
+	return DIV_ROUND_UP(ui, BITS_PER_BYTE);
 }
 
 /*
@@ -232,12 +230,12 @@ static int nwl_dsi_config_host(struct nwl_dsi *dsi)
 	}
 
 	/* values in byte clock cycles */
-	cycles = ui2bc(dsi, cfg->clk_pre);
+	cycles = ui2bc(cfg->clk_pre);
 	DRM_DEV_DEBUG_DRIVER(dsi->dev, "cfg_t_pre: 0x%x\n", cycles);
 	nwl_dsi_write(dsi, NWL_DSI_CFG_T_PRE, cycles);
 	cycles = ps2bc(dsi, cfg->lpx + cfg->clk_prepare + cfg->clk_zero);
 	DRM_DEV_DEBUG_DRIVER(dsi->dev, "cfg_tx_gap (pre): 0x%x\n", cycles);
-	cycles += ui2bc(dsi, cfg->clk_pre);
+	cycles += ui2bc(cfg->clk_pre);
 	DRM_DEV_DEBUG_DRIVER(dsi->dev, "cfg_t_post: 0x%x\n", cycles);
 	nwl_dsi_write(dsi, NWL_DSI_CFG_T_POST, cycles);
 	cycles = ps2bc(dsi, cfg->hs_exit);

drivers/phy/amlogic/phy-meson-axg-mipi-dphy.c

@@ -9,6 +9,7 @@
 
 #include <linux/bitfield.h>
 #include <linux/bitops.h>
+#include <linux/bits.h>
 #include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/io.h>
@@ -250,7 +251,7 @@ static int phy_meson_axg_mipi_dphy_power_on(struct phy *phy)
 		     (DIV_ROUND_UP(priv->config.clk_zero, temp) << 16) |
 		     (DIV_ROUND_UP(priv->config.clk_prepare, temp) << 24));
 	regmap_write(priv->regmap, MIPI_DSI_CLK_TIM1,
-		     DIV_ROUND_UP(priv->config.clk_pre, temp));
+		     DIV_ROUND_UP(priv->config.clk_pre, BITS_PER_BYTE));
 
 	regmap_write(priv->regmap, MIPI_DSI_HS_TIM,
 		     DIV_ROUND_UP(priv->config.hs_exit, temp) |

drivers/phy/broadcom/Kconfig

@@ -97,8 +97,7 @@ config PHY_BRCM_USB
 	depends on OF
 	select GENERIC_PHY
 	select SOC_BRCMSTB if ARCH_BRCMSTB
-	default ARCH_BCM4908
-	default ARCH_BRCMSTB
+	default ARCH_BCM4908 || ARCH_BRCMSTB
 	help
 	  Enable this to support the Broadcom STB USB PHY.
 	  This driver is required by the USB XHCI, EHCI and OHCI

drivers/phy/broadcom/phy-brcm-usb.c

@@ -18,6 +18,7 @@
 #include <linux/soc/brcmstb/brcmstb.h>
 #include <dt-bindings/phy/phy.h>
 #include <linux/mfd/syscon.h>
+#include <linux/suspend.h>
 
 #include "phy-brcm-usb-init.h"
 
@@ -70,12 +71,35 @@ struct brcm_usb_phy_data {
 	int			init_count;
 	int			wake_irq;
 	struct brcm_usb_phy	phys[BRCM_USB_PHY_ID_MAX];
+	struct notifier_block	pm_notifier;
+	bool			pm_active;
 };
 
 static s8 *node_reg_names[BRCM_REGS_MAX] = {
 	"crtl", "xhci_ec", "xhci_gbl", "usb_phy", "usb_mdio", "bdc_ec"
 };
 
+static int brcm_pm_notifier(struct notifier_block *notifier,
+			    unsigned long pm_event,
+			    void *unused)
+{
+	struct brcm_usb_phy_data *priv =
+		container_of(notifier, struct brcm_usb_phy_data, pm_notifier);
+
+	switch (pm_event) {
+	case PM_HIBERNATION_PREPARE:
+	case PM_SUSPEND_PREPARE:
+		priv->pm_active = true;
+		break;
+	case PM_POST_RESTORE:
+	case PM_POST_HIBERNATION:
+	case PM_POST_SUSPEND:
+		priv->pm_active = false;
+		break;
+	}
+	return NOTIFY_DONE;
+}
+
 static irqreturn_t brcm_usb_phy_wake_isr(int irq, void *dev_id)
 {
 	struct phy *gphy = dev_id;
@@ -91,6 +115,9 @@ static int brcm_usb_phy_init(struct phy *gphy)
 	struct brcm_usb_phy_data *priv =
 		container_of(phy, struct brcm_usb_phy_data, phys[phy->id]);
 
+	if (priv->pm_active)
+		return 0;
+
 	/*
 	 * Use a lock to make sure a second caller waits until
 	 * the base phy is inited before using it.
@@ -120,6 +147,9 @@ static int brcm_usb_phy_exit(struct phy *gphy)
 	struct brcm_usb_phy_data *priv =
 		container_of(phy, struct brcm_usb_phy_data, phys[phy->id]);
 
+	if (priv->pm_active)
+		return 0;
+
 	dev_dbg(&gphy->dev, "EXIT\n");
 	if (phy->id == BRCM_USB_PHY_2_0)
 		brcm_usb_uninit_eohci(&priv->ini);
@@ -488,6 +518,9 @@ static int brcm_usb_phy_probe(struct platform_device *pdev)
 	if (err)
 		return err;
 
+	priv->pm_notifier.notifier_call = brcm_pm_notifier;
+	register_pm_notifier(&priv->pm_notifier);
+
 	mutex_init(&priv->mutex);
 
 	/* make sure invert settings are correct */
@@ -528,7 +561,10 @@ static int brcm_usb_phy_probe(struct platform_device *pdev)
 
 static int brcm_usb_phy_remove(struct platform_device *pdev)
 {
+	struct brcm_usb_phy_data *priv = dev_get_drvdata(&pdev->dev);
+
 	sysfs_remove_group(&pdev->dev.kobj, &brcm_usb_phy_group);
+	unregister_pm_notifier(&priv->pm_notifier);
 
 	return 0;
 }
@@ -539,6 +575,7 @@ static int brcm_usb_phy_suspend(struct device *dev)
 	struct brcm_usb_phy_data *priv = dev_get_drvdata(dev);
 
 	if (priv->init_count) {
+		dev_dbg(dev, "SUSPEND\n");
 		priv->ini.wake_enabled = device_may_wakeup(dev);
 		if (priv->phys[BRCM_USB_PHY_3_0].inited)
 			brcm_usb_uninit_xhci(&priv->ini);
@@ -578,6 +615,7 @@ static int brcm_usb_phy_resume(struct device *dev)
 	 * Uninitialize anything that wasn't previously initialized.
 	 */
 	if (priv->init_count) {
+		dev_dbg(dev, "RESUME\n");
 		if (priv->wake_irq >= 0)
 			disable_irq_wake(priv->wake_irq);
 		brcm_usb_init_common(&priv->ini);

drivers/phy/cadence/phy-cadence-sierra.c

@@ -1338,7 +1338,7 @@ static int cdns_sierra_phy_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	const struct cdns_sierra_data *data;
 	unsigned int id_value;
-	int i, ret, node = 0;
+	int ret, node = 0;
 	void __iomem *base;
 	struct device_node *dn = dev->of_node, *child;
 
@@ -1416,7 +1416,8 @@ static int cdns_sierra_phy_probe(struct platform_device *pdev)
 			dev_err(dev, "failed to get reset %s\n",
 				child->full_name);
 			ret = PTR_ERR(sp->phys[node].lnk_rst);
-			goto put_child2;
+			of_node_put(child);
+			goto put_control;
 		}
 
 		if (!sp->autoconf) {
@@ -1424,7 +1425,9 @@ static int cdns_sierra_phy_probe(struct platform_device *pdev)
 			if (ret) {
 				dev_err(dev, "missing property in node %s\n",
 					child->name);
-				goto put_child;
+				of_node_put(child);
+				reset_control_put(sp->phys[node].lnk_rst);
+				goto put_control;
 			}
 		}
 
@@ -1434,7 +1437,9 @@ static int cdns_sierra_phy_probe(struct platform_device *pdev)
 
 		if (IS_ERR(gphy)) {
 			ret = PTR_ERR(gphy);
-			goto put_child;
+			of_node_put(child);
+			reset_control_put(sp->phys[node].lnk_rst);
+			goto put_control;
 		}
 		sp->phys[node].phy = gphy;
 		phy_set_drvdata(gphy, &sp->phys[node]);
@@ -1446,26 +1451,28 @@ static int cdns_sierra_phy_probe(struct platform_device *pdev)
 	if (sp->num_lanes > SIERRA_MAX_LANES) {
 		ret = -EINVAL;
 		dev_err(dev, "Invalid lane configuration\n");
-		goto put_child2;
+		goto put_control;
 	}
 
 	/* If more than one subnode, configure the PHY as multilink */
 	if (!sp->autoconf && sp->nsubnodes > 1) {
 		ret = cdns_sierra_phy_configure_multilink(sp);
 		if (ret)
-			goto put_child2;
+			goto put_control;
 	}
 
 	pm_runtime_enable(dev);
 	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
-	return PTR_ERR_OR_ZERO(phy_provider);
+	if (IS_ERR(phy_provider)) {
+		ret = PTR_ERR(phy_provider);
+		goto put_control;
+	}
 
-put_child:
-	node++;
-put_child2:
-	for (i = 0; i < node; i++)
-		reset_control_put(sp->phys[i].lnk_rst);
-	of_node_put(child);
+	return 0;
+
+put_control:
+	while (--node >= 0)
+		reset_control_put(sp->phys[node].lnk_rst);
 clk_disable:
 	cdns_sierra_phy_disable_clocks(sp);
 	reset_control_assert(sp->apb_rst);

drivers/phy/mediatek/phy-mtk-tphy.c

@@ -992,7 +992,7 @@ static int phy_efuse_get(struct mtk_tphy *tphy, struct mtk_phy_instance *instanc
 		/* no efuse, ignore it */
 		if (!instance->efuse_intr &&
 		    !instance->efuse_rx_imp &&
-		    !instance->efuse_rx_imp) {
+		    !instance->efuse_tx_imp) {
 			dev_warn(dev, "no u3 intr efuse, but dts enable it\n");
 			instance->efuse_sw_en = 0;
 			break;

drivers/phy/phy-core-mipi-dphy.c

@@ -36,7 +36,7 @@ int phy_mipi_dphy_get_default_config(unsigned long pixel_clock,
 
 	cfg->clk_miss = 0;
 	cfg->clk_post = 60000 + 52 * ui;
-	cfg->clk_pre = 8000;
+	cfg->clk_pre = 8;
 	cfg->clk_prepare = 38000;
 	cfg->clk_settle = 95000;
 	cfg->clk_term_en = 0;
@@ -97,7 +97,7 @@ int phy_mipi_dphy_config_validate(struct phy_configure_opts_mipi_dphy *cfg)
 	if (cfg->clk_post < (60000 + 52 * ui))
 		return -EINVAL;
 
-	if (cfg->clk_pre < 8000)
+	if (cfg->clk_pre < 8)
 		return -EINVAL;
 
 	if (cfg->clk_prepare < 38000 || cfg->clk_prepare > 95000)

drivers/phy/rockchip/phy-rockchip-inno-dsidphy.c

@@ -5,6 +5,7 @@
  * Author: Wyon Bi <bivvy.bi@rock-chips.com>
  */
 
+#include <linux/bits.h>
 #include <linux/kernel.h>
 #include <linux/clk.h>
 #include <linux/iopoll.h>
@@ -364,7 +365,7 @@ static void inno_dsidphy_mipi_mode_enable(struct inno_dsidphy *inno)
 	 * The value of counter for HS Tclk-pre
 	 * Tclk-pre = Tpin_txbyteclkhs * value
 	 */
-	clk_pre = DIV_ROUND_UP(cfg->clk_pre, t_txbyteclkhs);
+	clk_pre = DIV_ROUND_UP(cfg->clk_pre, BITS_PER_BYTE);
 
 	/*
 	 * The value of counter for HS Tlpx Time

drivers/phy/st/phy-stm32-usbphyc.c

@@ -304,7 +304,7 @@ static int stm32_usbphyc_pll_enable(struct stm32_usbphyc *usbphyc)
 
 		ret = __stm32_usbphyc_pll_disable(usbphyc);
 		if (ret)
-			return ret;
+			goto dec_n_pll_cons;
 	}
 
 	ret = stm32_usbphyc_regulators_enable(usbphyc);

drivers/phy/ti/phy-j721e-wiz.c

@@ -233,6 +233,7 @@ static const struct clk_div_table clk_div_table[] = {
 	{ .val = 1, .div = 2, },
 	{ .val = 2, .div = 4, },
 	{ .val = 3, .div = 8, },
+	{ /* sentinel */ },
 };
 
 static const struct wiz_clk_div_sel clk_div_sel[] = {

drivers/phy/xilinx/phy-zynqmp.c

@@ -134,7 +134,8 @@
 #define PROT_BUS_WIDTH_10		0x0
 #define PROT_BUS_WIDTH_20		0x1
 #define PROT_BUS_WIDTH_40		0x2
-#define PROT_BUS_WIDTH_SHIFT		2
+#define PROT_BUS_WIDTH_SHIFT(n)		((n) * 2)
+#define PROT_BUS_WIDTH_MASK(n)		GENMASK((n) * 2 + 1, (n) * 2)
 
 /* Number of GT lanes */
 #define NUM_LANES			4
@@ -445,12 +446,12 @@ static void xpsgtr_phy_init_sata(struct xpsgtr_phy *gtr_phy)
 static void xpsgtr_phy_init_sgmii(struct xpsgtr_phy *gtr_phy)
 {
 	struct xpsgtr_dev *gtr_dev = gtr_phy->dev;
+	u32 mask = PROT_BUS_WIDTH_MASK(gtr_phy->lane);
+	u32 val = PROT_BUS_WIDTH_10 << PROT_BUS_WIDTH_SHIFT(gtr_phy->lane);
 
 	/* Set SGMII protocol TX and RX bus width to 10 bits. */
-	xpsgtr_write(gtr_dev, TX_PROT_BUS_WIDTH,
-		     PROT_BUS_WIDTH_10 << (gtr_phy->lane * PROT_BUS_WIDTH_SHIFT));
-	xpsgtr_write(gtr_dev, RX_PROT_BUS_WIDTH,
-		     PROT_BUS_WIDTH_10 << (gtr_phy->lane * PROT_BUS_WIDTH_SHIFT));
+	xpsgtr_clr_set(gtr_dev, TX_PROT_BUS_WIDTH, mask, val);
+	xpsgtr_clr_set(gtr_dev, RX_PROT_BUS_WIDTH, mask, val);
 
 	xpsgtr_bypass_scrambler_8b10b(gtr_phy);
 }