Skip to content

L
linux
Commit 1ec35972 authored by Johannes Stezenbach's avatar Johannes Stezenbach Committed by Linus Torvalds
Browse files
Options

[PATCH] dvb: b2c2/flexcop driver refactoring part 1: drop old b2c2-usb stuff 

b2c2/flexcop driver refactoring to support PCI and USB based cards, part 1:
drop abandoned attempt to support USB devices
Signed-off-by: default avatarPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: default avatarJohannes Stezenbach <js@linuxtv.org>
Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
parent 6262d062
Hide whitespace changes
Inline Side-by-side
Showing with 0 additions and 779 deletions
drivers/media/dvb/b2c2/Kconfig
View file @ 1ec35972
......@@ -11,16 +11,3 @@ config DVB_B2C2_SKYSTAR
for the B2C2/BBTI Air2PC-ATSC card.
Say Y if you own such a device and want to use it.
config DVB_B2C2_USB
tristate "B2C2/Technisat Air/Sky/Cable2PC USB"
depends on DVB_CORE && USB && EXPERIMENTAL
select DVB_STV0299
select DVB_MT352
help
Support for the Air/Sky/Cable2PC USB DVB device by B2C2. Currently
the does nothing, but providing basic function for the used usb
protocol.
Say Y if you own such a device and want to use it.
drivers/media/dvb/b2c2/Makefile
View file @ 1ec35972
obj-b2c2-usb = b2c2-usb-core.o b2c2-common.o
obj-$(CONFIG_DVB_B2C2_SKYSTAR) += skystar2.o
obj-$(CONFIG_DVB_B2C2_USB) + = b2c2-usb.o
EXTRA_CFLAGS = -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/
drivers/media/dvb/b2c2/b2c2-common.c deleted 100644 → 0
View file @ 6262d062
/*
* b2c2-common.c - common methods for the B2C2/Technisat SkyStar2 PCI DVB card and
* for the B2C2/Technisat Sky/Cable/AirStar USB devices
* based on the FlexCopII/FlexCopIII by B2C2, Inc.
*
* Copyright (C) 2003 Vadim Catana, skystar@moldova.cc
*
* FIX: DISEQC Tone Burst in flexcop_diseqc_ioctl()
* FIX: FULL soft DiSEqC for skystar2 (FlexCopII rev 130) VP310 equipped
* Vincenzo Di Massa, hawk.it at tiscalinet.it
*
* Converted to Linux coding style
* Misc reorganization, polishing, restyling
* Roberto Ragusa, r.ragusa at libero.it
*
* Added hardware filtering support,
* Niklas Peinecke, peinecke at gdv.uni-hannover.de
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public License
* as published by the Free Software Foundation; either version 2.1
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*
*/
#include "stv0299.h"
#include "mt352.h"
#include "mt312.h"
static int samsung_tbmu24112_set_symbol_rate(struct dvb_frontend* fe, u32 srate, u32 ratio)
{
u8 aclk = 0;
u8 bclk = 0;
if (srate < 1500000) { aclk = 0xb7; bclk = 0x47; }
else if (srate < 3000000) { aclk = 0xb7; bclk = 0x4b; }
else if (srate < 7000000) { aclk = 0xb7; bclk = 0x4f; }
else if (srate < 14000000) { aclk = 0xb7; bclk = 0x53; }
else if (srate < 30000000) { aclk = 0xb6; bclk = 0x53; }
else if (srate < 45000000) { aclk = 0xb4; bclk = 0x51; }
stv0299_writereg (fe, 0x13, aclk);
stv0299_writereg (fe, 0x14, bclk);
stv0299_writereg (fe, 0x1f, (ratio >> 16) & 0xff);
stv0299_writereg (fe, 0x20, (ratio >> 8) & 0xff);
stv0299_writereg (fe, 0x21, (ratio ) & 0xf0);
return 0;
}
static int samsung_tbmu24112_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
{
u8 buf[4];
u32 div;
struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) };
// struct adapter* adapter = (struct adapter*) fe->dvb->priv;
div = params->frequency / 125;
buf[0] = (div >> 8) & 0x7f;
buf[1] = div & 0xff;
buf[2] = 0x84; // 0xC4
buf[3] = 0x08;
if (params->frequency < 1500000) buf[3] |= 0x10;
// if (i2c_transfer (&adapter->i2c_adap, &msg, 1) != 1) return -EIO;
return 0;
}
static u8 samsung_tbmu24112_inittab[] = {
0x01, 0x15,
0x02, 0x30,
0x03, 0x00,
0x04, 0x7D,
0x05, 0x35,
0x06, 0x02,
0x07, 0x00,
0x08, 0xC3,
0x0C, 0x00,
0x0D, 0x81,
0x0E, 0x23,
0x0F, 0x12,
0x10, 0x7E,
0x11, 0x84,
0x12, 0xB9,
0x13, 0x88,
0x14, 0x89,
0x15, 0xC9,
0x16, 0x00,
0x17, 0x5C,
0x18, 0x00,
0x19, 0x00,
0x1A, 0x00,
0x1C, 0x00,
0x1D, 0x00,
0x1E, 0x00,
0x1F, 0x3A,
0x20, 0x2E,
0x21, 0x80,
0x22, 0xFF,
0x23, 0xC1,
0x28, 0x00,
0x29, 0x1E,
0x2A, 0x14,
0x2B, 0x0F,
0x2C, 0x09,
0x2D, 0x05,
0x31, 0x1F,
0x32, 0x19,
0x33, 0xFE,
0x34, 0x93,
0xff, 0xff,
};
static struct stv0299_config samsung_tbmu24112_config = {
.demod_address = 0x68,
.inittab = samsung_tbmu24112_inittab,
.mclk = 88000000UL,
.invert = 0,
.enhanced_tuning = 0,
.skip_reinit = 0,
.lock_output = STV0229_LOCKOUTPUT_LK,
.volt13_op0_op1 = STV0299_VOLT13_OP1,
.min_delay_ms = 100,
.set_symbol_rate = samsung_tbmu24112_set_symbol_rate,
.pll_set = samsung_tbmu24112_pll_set,
};
static int samsung_tdtc9251dh0_demod_init(struct dvb_frontend* fe)
{
static u8 mt352_clock_config [] = { 0x89, 0x10, 0x2d };
static u8 mt352_reset [] = { 0x50, 0x80 };
static u8 mt352_adc_ctl_1_cfg [] = { 0x8E, 0x40 };
static u8 mt352_agc_cfg [] = { 0x67, 0x28, 0xa1 };
static u8 mt352_capt_range_cfg[] = { 0x75, 0x32 };
mt352_write(fe, mt352_clock_config, sizeof(mt352_clock_config));
udelay(2000);
mt352_write(fe, mt352_reset, sizeof(mt352_reset));
mt352_write(fe, mt352_adc_ctl_1_cfg, sizeof(mt352_adc_ctl_1_cfg));
mt352_write(fe, mt352_agc_cfg, sizeof(mt352_agc_cfg));
mt352_write(fe, mt352_capt_range_cfg, sizeof(mt352_capt_range_cfg));
return 0;
}
static int samsung_tdtc9251dh0_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params, u8* pllbuf)
{
u32 div;
unsigned char bs = 0;
#define IF_FREQUENCYx6 217 /* 6 * 36.16666666667MHz */
div = (((params->frequency + 83333) * 3) / 500000) + IF_FREQUENCYx6;
if (params->frequency >= 48000000 && params->frequency <= 154000000) bs = 0x09;
if (params->frequency >= 161000000 && params->frequency <= 439000000) bs = 0x0a;
if (params->frequency >= 447000000 && params->frequency <= 863000000) bs = 0x08;
pllbuf[0] = 0xc2; // Note: non-linux standard PLL i2c address
pllbuf[1] = div >> 8;
pllbuf[2] = div & 0xff;
pllbuf[3] = 0xcc;
pllbuf[4] = bs;
return 0;
}
static struct mt352_config samsung_tdtc9251dh0_config = {
.demod_address = 0x0f,
.demod_init = samsung_tdtc9251dh0_demod_init,
.pll_set = samsung_tdtc9251dh0_pll_set,
};
static int skystar23_samsung_tbdu18132_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
{
u8 buf[4];
u32 div;
struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) };
// struct adapter* adapter = (struct adapter*) fe->dvb->priv;
div = (params->frequency + (125/2)) / 125;
buf[0] = (div >> 8) & 0x7f;
buf[1] = (div >> 0) & 0xff;
buf[2] = 0x84 | ((div >> 10) & 0x60);
buf[3] = 0x80;
if (params->frequency < 1550000)
buf[3] |= 0x02;
//if (i2c_transfer (&adapter->i2c_adap, &msg, 1) != 1) return -EIO;
return 0;
}
static struct mt312_config skystar23_samsung_tbdu18132_config = {
.demod_address = 0x0e,
.pll_set = skystar23_samsung_tbdu18132_pll_set,
};
drivers/media/dvb/b2c2/b2c2-usb-core.c deleted 100644 → 0
View file @ 6262d062
/*
* Copyright (C) 2004 Patrick Boettcher <patrick.boettcher@desy.de>,
* Luca Bertagnolio <>,
*
* based on information provided by John Jurrius from BBTI, Inc.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation, version 2.
*
*/
#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/usb.h>
#include <linux/moduleparam.h>
#include <linux/pci.h>
#include <linux/version.h>
#include "dmxdev.h"
#include "dvb_demux.h"
#include "dvb_filter.h"
#include "dvb_net.h"
#include "dvb_frontend.h"
/* debug */
#define dprintk(level,args...) \
do { if ((debug & level)) { printk(args); } } while (0)
#define debug_dump(b,l) if (debug) {\
int i; deb_xfer("%s: %d > ",__FUNCTION__,l); \
for (i = 0; i < l; i++) deb_xfer("%02x ", b[i]); \
deb_xfer("\n");\
}
static int debug;
module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "set debugging level (1=info,ts=2,ctrl=4 (or-able)).");
#define deb_info(args...) dprintk(0x01,args)
#define deb_ts(args...) dprintk(0x02,args)
#define deb_ctrl(args...) dprintk(0x04,args)
/* Version information */
#define DRIVER_VERSION "0.0"
#define DRIVER_DESC "Driver for B2C2/Technisat Air/Cable/Sky-2-PC USB devices"
#define DRIVER_AUTHOR "Patrick Boettcher, patrick.boettcher@desy.de"
/* transfer parameters */
#define B2C2_USB_FRAMES_PER_ISO 4
#define B2C2_USB_NUM_ISO_URB 4 /* TODO check out a good value */
#define B2C2_USB_CTRL_PIPE_IN usb_rcvctrlpipe(b2c2->udev,0)
#define B2C2_USB_CTRL_PIPE_OUT usb_sndctrlpipe(b2c2->udev,0)
#define B2C2_USB_DATA_PIPE usb_rcvisocpipe(b2c2->udev,0x81)
struct usb_b2c2_usb {
struct usb_device *udev;
struct usb_interface *uintf;
u8 *iso_buffer;
int buffer_size;
dma_addr_t iso_dma_handle;
struct urb *iso_urb[B2C2_USB_NUM_ISO_URB];
};
/*
* USB
* 10 90 34 12 78 56 04 00
* usb_control_msg(udev, usb_sndctrlpipe(udev,0),
* 0x90,
* 0x10,
* 0x1234,
* 0x5678,
* buf,
* 4,
* 5*HZ);
*
* extern int usb_control_msg(struct usb_device *dev, unsigned int pipe,
* __u8 request,
* __u8 requesttype,
* __u16 value,
* __u16 index,
* void *data,
* __u16 size,
* int timeout);
*
*/
/* request types */
typedef enum {
/* something is wrong with this part
RTYPE_READ_DW = (1 << 6),
RTYPE_WRITE_DW_1 = (3 << 6),
RTYPE_READ_V8_MEMORY = (6 << 6),
RTYPE_WRITE_V8_MEMORY = (7 << 6),
RTYPE_WRITE_V8_FLASH = (8 << 6),
RTYPE_GENERIC = (9 << 6),
*/
RTYPE_READ_DW = (3 << 6),
RTYPE_WRITE_DW_1 = (1 << 6),
RTYPE_READ_V8_MEMORY = (6 << 6),
RTYPE_WRITE_V8_MEMORY = (7 << 6),
RTYPE_WRITE_V8_FLASH = (8 << 6),
RTYPE_GENERIC = (9 << 6),
} b2c2_usb_request_type_t;
/* request */
typedef enum {
B2C2_USB_WRITE_V8_MEM = 0x04,
B2C2_USB_READ_V8_MEM = 0x05,
B2C2_USB_READ_REG = 0x08,
B2C2_USB_WRITE_REG = 0x0A,
/* B2C2_USB_WRITEREGLO = 0x0A, */
B2C2_USB_WRITEREGHI = 0x0B,
B2C2_USB_FLASH_BLOCK = 0x10,
B2C2_USB_I2C_REQUEST = 0x11,
B2C2_USB_UTILITY = 0x12,
} b2c2_usb_request_t;
/* function definition for I2C_REQUEST */
typedef enum {
USB_FUNC_I2C_WRITE = 0x01,
USB_FUNC_I2C_MULTIWRITE = 0x02,
USB_FUNC_I2C_READ = 0x03,
USB_FUNC_I2C_REPEATWRITE = 0x04,
USB_FUNC_GET_DESCRIPTOR = 0x05,
USB_FUNC_I2C_REPEATREAD = 0x06,
/* DKT 020208 - add this to support special case of DiSEqC */
USB_FUNC_I2C_CHECKWRITE = 0x07,
USB_FUNC_I2C_CHECKRESULT = 0x08,
} b2c2_usb_i2c_function_t;
/*
* function definition for UTILITY request 0x12
* DKT 020304 - new utility function
*/
typedef enum {
UTILITY_SET_FILTER = 0x01,
UTILITY_DATA_ENABLE = 0x02,
UTILITY_FLEX_MULTIWRITE = 0x03,
UTILITY_SET_BUFFER_SIZE = 0x04,
UTILITY_FLEX_OPERATOR = 0x05,
UTILITY_FLEX_RESET300_START = 0x06,
UTILITY_FLEX_RESET300_STOP = 0x07,
UTILITY_FLEX_RESET300 = 0x08,
UTILITY_SET_ISO_SIZE = 0x09,
UTILITY_DATA_RESET = 0x0A,
UTILITY_GET_DATA_STATUS = 0x10,
UTILITY_GET_V8_REG = 0x11,
/* DKT 020326 - add function for v1.14 */
UTILITY_SRAM_WRITE = 0x12,
UTILITY_SRAM_READ = 0x13,
UTILITY_SRAM_TESTFILL = 0x14,
UTILITY_SRAM_TESTSET = 0x15,
UTILITY_SRAM_TESTVERIFY = 0x16,
} b2c2_usb_utility_function_t;
#define B2C2_WAIT_FOR_OPERATION_RW 1 // 1 s
#define B2C2_WAIT_FOR_OPERATION_RDW 3 // 3 s
#define B2C2_WAIT_FOR_OPERATION_WDW 1 // 1 s
#define B2C2_WAIT_FOR_OPERATION_V8READ 3 // 3 s
#define B2C2_WAIT_FOR_OPERATION_V8WRITE 3 // 3 s
#define B2C2_WAIT_FOR_OPERATION_V8FLASH 3 // 3 s
/* JLP 111700: we will include the 1 bit gap between the upper and lower 3 bits
* in the IBI address, to make the V8 code simpler.
* PCI ADDRESS FORMAT: 0x71C -> 0000 0111 0001 1100 (these are the six bits used)
* in general: 0000 0HHH 000L LL00
* IBI ADDRESS FORMAT: RHHH BLLL
*
* where R is the read(1)/write(0) bit, B is the busy bit
* and HHH and LLL are the two sets of three bits from the PCI address.
*/
#define B2C2_FLEX_PCIOFFSET_TO_INTERNALADDR(usPCI) (u8) (((usPCI >> 2) & 0x07) + ((usPCI >> 4) & 0x70))
#define B2C2_FLEX_INTERNALADDR_TO_PCIOFFSET(ucAddr) (u16) (((ucAddr & 0x07) << 2) + ((ucAddr & 0x70) << 4))
/*
* DKT 020228 - forget about this VENDOR_BUFFER_SIZE, read and write register
* deal with DWORD or 4 bytes, that should be should from now on
*/
static u32 b2c2_usb_read_dw(struct usb_b2c2_usb *b2c2, u16 wRegOffsPCI)
{
u32 val;
u16 wAddress = B2C2_FLEX_PCIOFFSET_TO_INTERNALADDR(wRegOffsPCI) | 0x0080;
int len = usb_control_msg(b2c2->udev,
B2C2_USB_CTRL_PIPE_IN,
B2C2_USB_READ_REG,
RTYPE_READ_DW,
wAddress,
0,
&val,
sizeof(u32),
B2C2_WAIT_FOR_OPERATION_RDW * 1000);
if (len != sizeof(u32)) {
err("error while reading dword from %d (%d).",wAddress,wRegOffsPCI);
return -EIO;
} else
return val;
}
/*
* DKT 020228 - from now on, we don't support anything older than firm 1.00
* I eliminated the write register as a 2 trip of writing hi word and lo word
* and force this to write only 4 bytes at a time.
* NOTE: this should work with all the firmware from 1.00 and newer
*/
static int b2c2_usb_write_dw(struct usb_b2c2_usb *b2c2, u16 wRegOffsPCI, u32 val)
{
u16 wAddress = B2C2_FLEX_PCIOFFSET_TO_INTERNALADDR(wRegOffsPCI);
int len = usb_control_msg(b2c2->udev,
B2C2_USB_CTRL_PIPE_OUT,
B2C2_USB_WRITE_REG,
RTYPE_WRITE_DW_1,
wAddress,
0,
&val,
sizeof(u32),
B2C2_WAIT_FOR_OPERATION_RDW * 1000);
if (len != sizeof(u32)) {
err("error while reading dword from %d (%d).",wAddress,wRegOffsPCI);
return -EIO;
} else
return 0;
}
/*
* DKT 010817 - add support for V8 memory read/write and flash update
*/
static int b2c2_usb_v8_memory_req(struct usb_b2c2_usb *b2c2,
b2c2_usb_request_t req, u8 page, u16 wAddress,
u16 buflen, u8 *pbBuffer)
{
u8 dwRequestType;
u16 wIndex;
int nWaitTime,pipe,len;
wIndex = page << 8;
switch (req) {
case B2C2_USB_READ_V8_MEM:
nWaitTime = B2C2_WAIT_FOR_OPERATION_V8READ;
dwRequestType = (u8) RTYPE_READ_V8_MEMORY;
pipe = B2C2_USB_CTRL_PIPE_IN;
break;
case B2C2_USB_WRITE_V8_MEM:
wIndex |= pbBuffer[0];
nWaitTime = B2C2_WAIT_FOR_OPERATION_V8WRITE;
dwRequestType = (u8) RTYPE_WRITE_V8_MEMORY;
pipe = B2C2_USB_CTRL_PIPE_OUT;
break;
case B2C2_USB_FLASH_BLOCK:
nWaitTime = B2C2_WAIT_FOR_OPERATION_V8FLASH;
dwRequestType = (u8) RTYPE_WRITE_V8_FLASH;
pipe = B2C2_USB_CTRL_PIPE_OUT;
break;
default:
deb_info("unsupported request for v8_mem_req %x.\n",req);
return -EINVAL;
}
len = usb_control_msg(b2c2->udev,pipe,
req,
dwRequestType,
wAddress,
wIndex,
pbBuffer,
buflen,
nWaitTime * 1000);
return len == buflen ? 0 : -EIO;
}
static int b2c2_usb_i2c_req(struct usb_b2c2_usb *b2c2,
b2c2_usb_request_t req, b2c2_usb_i2c_function_t func,
u8 port, u8 chipaddr, u8 addr, u8 buflen, u8 *buf)
{
u16 wValue, wIndex;
int nWaitTime,pipe,len;
u8 dwRequestType;
switch (func) {
case USB_FUNC_I2C_WRITE:
case USB_FUNC_I2C_MULTIWRITE:
case USB_FUNC_I2C_REPEATWRITE:
/* DKT 020208 - add this to support special case of DiSEqC */
case USB_FUNC_I2C_CHECKWRITE:
pipe = B2C2_USB_CTRL_PIPE_OUT;
nWaitTime = 2;
dwRequestType = (u8) RTYPE_GENERIC;
break;
case USB_FUNC_I2C_READ:
case USB_FUNC_I2C_REPEATREAD:
pipe = B2C2_USB_CTRL_PIPE_IN;
nWaitTime = 2;
dwRequestType = (u8) RTYPE_GENERIC;
break;
default:
deb_info("unsupported function for i2c_req %x\n",func);
return -EINVAL;
}
wValue = (func << 8 ) | port;
wIndex = (chipaddr << 8 ) | addr;
len = usb_control_msg(b2c2->udev,pipe,
req,
dwRequestType,
addr,
wIndex,
buf,
buflen,
nWaitTime * 1000);
return len == buflen ? 0 : -EIO;
}
int static b2c2_usb_utility_req(struct usb_b2c2_usb *b2c2, int set,
b2c2_usb_utility_function_t func, u8 extra, u16 wIndex,
u16 buflen, u8 *pvBuffer)
{
u16 wValue;
int nWaitTime = 2,
pipe = set ? B2C2_USB_CTRL_PIPE_OUT : B2C2_USB_CTRL_PIPE_IN,
len;
wValue = (func << 8) | extra;
len = usb_control_msg(b2c2->udev,pipe,
B2C2_USB_UTILITY,
(u8) RTYPE_GENERIC,
wValue,
wIndex,
pvBuffer,
buflen,
nWaitTime * 1000);
return len == buflen ? 0 : -EIO;
}
static void b2c2_dumpfourreg(struct usb_b2c2_usb *b2c2, u16 offs)
{
u32 r0,r1,r2,r3;
r0 = r1 = r2 = r3 = 0;
r0 = b2c2_usb_read_dw(b2c2,offs);
r1 = b2c2_usb_read_dw(b2c2,offs + 0x04);
r2 = b2c2_usb_read_dw(b2c2,offs + 0x08);
r3 = b2c2_usb_read_dw(b2c2,offs + 0x0c);
deb_ctrl("dump: offset: %03x, %08x, %08x, %08x, %08x\n",offs,r0,r1,r2,r3);
}
static void b2c2_urb_complete(struct urb *urb, struct pt_regs *ptregs)
{
struct usb_b2c2_usb *b2c2 = urb->context;
deb_ts("urb completed, bufsize: %d\n",urb->transfer_buffer_length);
// urb_submit_urb(urb,GFP_ATOMIC); enable for real action
}
static void b2c2_exit_usb(struct usb_b2c2_usb *b2c2)
{
int i;
for (i = 0; i < B2C2_USB_NUM_ISO_URB; i++)
if (b2c2->iso_urb[i] != NULL) { /* not sure about unlink_urb and iso-urbs TODO */
deb_info("unlinking/killing urb no. %d\n",i);
#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,7)
usb_unlink_urb(b2c2->iso_urb[i]);
#else
usb_kill_urb(b2c2->iso_urb[i]);
#endif
usb_free_urb(b2c2->iso_urb[i]);
}
if (b2c2->iso_buffer != NULL)
pci_free_consistent(NULL,b2c2->buffer_size, b2c2->iso_buffer, b2c2->iso_dma_handle);
}
static int b2c2_init_usb(struct usb_b2c2_usb *b2c2)
{
u16 frame_size = le16_to_cpu(b2c2->uintf->cur_altsetting->endpoint[0].desc.wMaxPacketSize);
int bufsize = B2C2_USB_NUM_ISO_URB * B2C2_USB_FRAMES_PER_ISO * frame_size,i,j,ret;
int buffer_offset = 0;
deb_info("creating %d iso-urbs with %d frames each of %d bytes size = %d.\n",
B2C2_USB_NUM_ISO_URB, B2C2_USB_FRAMES_PER_ISO, frame_size,bufsize);
b2c2->iso_buffer = pci_alloc_consistent(NULL,bufsize,&b2c2->iso_dma_handle);
if (b2c2->iso_buffer == NULL)
return -ENOMEM;
memset(b2c2->iso_buffer, 0, bufsize);
b2c2->buffer_size = bufsize;
/* creating iso urbs */
for (i = 0; i < B2C2_USB_NUM_ISO_URB; i++)
if (!(b2c2->iso_urb[i] = usb_alloc_urb(B2C2_USB_FRAMES_PER_ISO,GFP_ATOMIC))) {
ret = -ENOMEM;
goto urb_error;
}
/* initialising and submitting iso urbs */
for (i = 0; i < B2C2_USB_NUM_ISO_URB; i++) {
int frame_offset = 0;
struct urb *urb = b2c2->iso_urb[i];
deb_info("initializing and submitting urb no. %d (buf_offset: %d).\n",i,buffer_offset);
urb->dev = b2c2->udev;
urb->context = b2c2;
urb->complete = b2c2_urb_complete;
urb->pipe = B2C2_USB_DATA_PIPE;
urb->transfer_flags = URB_ISO_ASAP;
urb->interval = 1;
urb->number_of_packets = B2C2_USB_FRAMES_PER_ISO;
urb->transfer_buffer_length = frame_size * B2C2_USB_FRAMES_PER_ISO;
urb->transfer_buffer = b2c2->iso_buffer + buffer_offset;
buffer_offset += frame_size * B2C2_USB_FRAMES_PER_ISO;
for (j = 0; j < B2C2_USB_FRAMES_PER_ISO; j++) {
deb_info("urb no: %d, frame: %d, frame_offset: %d\n",i,j,frame_offset);
urb->iso_frame_desc[j].offset = frame_offset;
urb->iso_frame_desc[j].length = frame_size;
frame_offset += frame_size;
}
if ((ret = usb_submit_urb(b2c2->iso_urb[i],GFP_ATOMIC))) {
err("submitting urb %d failed with %d.",i,ret);
goto urb_error;
}
deb_info("submitted urb no. %d.\n",i);
}
ret = 0;
goto success;
urb_error:
b2c2_exit_usb(b2c2);
success:
return ret;
}
static int b2c2_usb_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
struct usb_device *udev = interface_to_usbdev(intf);
struct usb_b2c2_usb *b2c2 = NULL;
int ret;
b2c2 = kmalloc(sizeof(struct usb_b2c2_usb),GFP_KERNEL);
if (b2c2 == NULL) {
err("no memory");
return -ENOMEM;
}
b2c2->udev = udev;
b2c2->uintf = intf;
/* use the alternate setting with the larges buffer */
usb_set_interface(udev,0,1);
if ((ret = b2c2_init_usb(b2c2)))
goto usb_init_error;
usb_set_intfdata(intf,b2c2);
switch (udev->speed) {
case USB_SPEED_LOW:
err("cannot handle USB speed because it is to sLOW.");
break;
case USB_SPEED_FULL:
info("running at FULL speed.");
break;
case USB_SPEED_HIGH:
info("running at HIGH speed.");
break;
case USB_SPEED_UNKNOWN: /* fall through */
default:
err("cannot handle USB speed because it is unkown.");
break;
}
b2c2_dumpfourreg(b2c2,0x200);
b2c2_dumpfourreg(b2c2,0x300);
b2c2_dumpfourreg(b2c2,0x400);
b2c2_dumpfourreg(b2c2,0x700);
if (ret == 0)
info("%s successfully initialized and connected.",DRIVER_DESC);
else
info("%s error while loading driver (%d)",DRIVER_DESC,ret);
ret = 0;
goto success;
usb_init_error:
kfree(b2c2);
success:
return ret;
}
static void b2c2_usb_disconnect(struct usb_interface *intf)
{
struct usb_b2c2_usb *b2c2 = usb_get_intfdata(intf);
usb_set_intfdata(intf,NULL);
if (b2c2 != NULL) {
b2c2_exit_usb(b2c2);
kfree(b2c2);
}
info("%s successfully deinitialized and disconnected.",DRIVER_DESC);
}
static struct usb_device_id b2c2_usb_table [] = {
{ USB_DEVICE(0x0af7, 0x0101) }
};
/* usb specific object needed to register this driver with the usb subsystem */
static struct usb_driver b2c2_usb_driver = {
.owner = THIS_MODULE,
.name = "dvb_b2c2_usb",
.probe = b2c2_usb_probe,
.disconnect = b2c2_usb_disconnect,
.id_table = b2c2_usb_table,
};
/* module stuff */
static int __init b2c2_usb_init(void)
{
int result;
if ((result = usb_register(&b2c2_usb_driver))) {
err("usb_register failed. Error number %d",result);
return result;
}
return 0;
}
static void __exit b2c2_usb_exit(void)
{
/* deregister this driver from the USB subsystem */
usb_deregister(&b2c2_usb_driver);
}
module_init (b2c2_usb_init);
module_exit (b2c2_usb_exit);
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");
MODULE_DEVICE_TABLE(usb, b2c2_usb_table);
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7