Skip to content

L
linux
Commit 1f5c3cc1 authored by David S. Miller's avatar David S. Miller
Browse files
Options

Merge branch 'cosa-cleanups' 

Peng Li says:

====================
net: cosa: clean up some code style issues

This patchset clean up some code style issues.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parents 95d359ed b8773205
Hide whitespace changes
Inline Side-by-side
Showing with 260 additions and 233 deletions
drivers/net/wan/cosa.c
View file @ 1f5c3cc1
// SPDX-License-Identifier: GPL-2.0-or-later
/* $Id: cosa.c,v 1.31 2000/03/08 17:47:16 kas Exp $ */
/*
* Copyright (C) 1995-1997 Jan "Yenya" Kasprzak <kas@fi.muni.cz>
/* Copyright (C) 1995-1997 Jan "Yenya" Kasprzak <kas@fi.muni.cz>
* Generic HDLC port Copyright (C) 2008 Krzysztof Halasa <khc@pm.waw.pl>
*/
/*
* The driver for the SRP and COSA synchronous serial cards.
/* The driver for the SRP and COSA synchronous serial cards.
*
* HARDWARE INFO
*
......@@ -90,7 +88,7 @@
#define COSA_MAX_ID_STRING 128
/* Maximum length of the channel name */
#define COSA_MAX_NAME (sizeof("cosaXXXcXXX")+1)
#define COSA_MAX_NAME (sizeof("cosaXXXcXXX") + 1)
/* Per-channel data structure */
......@@ -124,9 +122,9 @@ struct channel_data {
};
/* cosa->firmware_status bits */
#define COSA_FW_RESET (1<<0) /* Is the ROM monitor active? */
#define COSA_FW_DOWNLOAD (1<<1) /* Is the microcode downloaded? */
#define COSA_FW_START (1<<2) /* Is the microcode running? */
#define COSA_FW_RESET BIT(0) /* Is the ROM monitor active? */
#define COSA_FW_DOWNLOAD BIT(1) /* Is the microcode downloaded? */
#define COSA_FW_START BIT(2) /* Is the microcode running? */
struct cosa_data {
int num; /* Card number */
......@@ -152,28 +150,25 @@ struct cosa_data {
char *type; /* card type */
};
/*
* Define this if you want all the possible ports to be autoprobed.
/* Define this if you want all the possible ports to be autoprobed.
* It is here but it probably is not a good idea to use this.
*/
/* #define COSA_ISA_AUTOPROBE 1 */
/* #define COSA_ISA_AUTOPROBE 1*/
/*
* Character device major number. 117 was allocated for us.
/* Character device major number. 117 was allocated for us.
* The value of 0 means to allocate a first free one.
*/
static DEFINE_MUTEX(cosa_chardev_mutex);
static int cosa_major = 117;
/*
* Encoding of the minor numbers:
/* Encoding of the minor numbers:
* The lowest CARD_MINOR_BITS bits means the channel on the single card,
* the highest bits means the card number.
*/
#define CARD_MINOR_BITS 4 /* How many bits in minor number are reserved
* for the single card */
/*
* The following depends on CARD_MINOR_BITS. Unfortunately, the "MODULE_STRING"
* for the single card
*/
/* The following depends on CARD_MINOR_BITS. Unfortunately, the "MODULE_STRING"
* macro doesn't like anything other than the raw number as an argument :-(
*/
#define MAX_CARDS 16
......@@ -184,8 +179,7 @@ static int cosa_major = 117;
#define DRIVER_TXMAP_SHIFT 2
#define DRIVER_TXMAP_MASK 0x0c /* FIXME: 0xfc for 8-channel version */
/*
* for cosa->rxtx - indicates whether either transmit or receive is
/* for cosa->rxtx - indicates whether either transmit or receive is
* in progress. These values are mean number of the bit.
*/
#define TXBIT 0
......@@ -198,22 +192,22 @@ static int cosa_major = 117;
#undef DEBUG_IRQS //1 /* Print the message when the IRQ is received */
#undef DEBUG_IO //1 /* Dump the I/O traffic */
#define TX_TIMEOUT (5*HZ)
#define TX_TIMEOUT (5 * HZ)
/* Maybe the following should be allocated dynamically */
static struct cosa_data cosa_cards[MAX_CARDS];
static int nr_cards;
#ifdef COSA_ISA_AUTOPROBE
static int io[MAX_CARDS+1] = { 0x220, 0x228, 0x210, 0x218, 0, };
static int io[MAX_CARDS + 1] = {0x220, 0x228, 0x210, 0x218, 0,};
/* NOTE: DMA is not autoprobed!!! */
static int dma[MAX_CARDS+1] = { 1, 7, 1, 7, 1, 7, 1, 7, 0, };
static int dma[MAX_CARDS + 1] = {1, 7, 1, 7, 1, 7, 1, 7, 0,};
#else
static int io[MAX_CARDS+1];
static int dma[MAX_CARDS+1];
static int io[MAX_CARDS + 1];
static int dma[MAX_CARDS + 1];
#endif
/* IRQ can be safely autoprobed */
static int irq[MAX_CARDS+1] = { -1, -1, -1, -1, -1, -1, 0, };
static int irq[MAX_CARDS + 1] = {-1, -1, -1, -1, -1, -1, 0,};
/* for class stuff*/
static struct class *cosa_class;
......@@ -244,14 +238,14 @@ MODULE_LICENSE("GPL");
#define cosa_inw inw
#endif
#define is_8bit(cosa) (!(cosa->datareg & 0x08))
#define is_8bit(cosa) (!((cosa)->datareg & 0x08))
#define cosa_getstatus(cosa) (cosa_inb(cosa->statusreg))
#define cosa_putstatus(cosa, stat) (cosa_outb(stat, cosa->statusreg))
#define cosa_getdata16(cosa) (cosa_inw(cosa->datareg))
#define cosa_getdata8(cosa) (cosa_inb(cosa->datareg))
#define cosa_putdata16(cosa, dt) (cosa_outw(dt, cosa->datareg))
#define cosa_putdata8(cosa, dt) (cosa_outb(dt, cosa->datareg))
#define cosa_getstatus(cosa) (cosa_inb((cosa)->statusreg))
#define cosa_putstatus(cosa, stat) (cosa_outb(stat, (cosa)->statusreg))
#define cosa_getdata16(cosa) (cosa_inw((cosa)->datareg))
#define cosa_getdata8(cosa) (cosa_inb((cosa)->datareg))
#define cosa_putdata16(cosa, dt) (cosa_outw(dt, (cosa)->datareg))
#define cosa_putdata8(cosa, dt) (cosa_outb(dt, (cosa)->datareg))
/* Initialization stuff */
static int cosa_probe(int ioaddr, int irq, int dma);
......@@ -280,14 +274,14 @@ static char *chrdev_setup_rx(struct channel_data *channel, int size);
static int chrdev_rx_done(struct channel_data *channel);
static int chrdev_tx_done(struct channel_data *channel, int size);
static ssize_t cosa_read(struct file *file,
char __user *buf, size_t count, loff_t *ppos);
char __user *buf, size_t count, loff_t *ppos);
static ssize_t cosa_write(struct file *file,
const char __user *buf, size_t count, loff_t *ppos);
const char __user *buf, size_t count, loff_t *ppos);
static unsigned int cosa_poll(struct file *file, poll_table *poll);
static int cosa_open(struct inode *inode, struct file *file);
static int cosa_release(struct inode *inode, struct file *file);
static long cosa_chardev_ioctl(struct file *file, unsigned int cmd,
unsigned long arg);
unsigned long arg);
#ifdef COSA_FASYNC_WORKING
static int cosa_fasync(struct inode *inode, struct file *file, int on);
#endif
......@@ -337,7 +331,7 @@ static void debug_status_in(struct cosa_data *cosa, int status);
static void debug_status_out(struct cosa_data *cosa, int status);
#endif
static inline struct channel_data* dev_to_chan(struct net_device *dev)
static inline struct channel_data *dev_to_chan(struct net_device *dev)
{
return (struct channel_data *)dev_to_hdlc(dev)->priv;
}
......@@ -355,15 +349,16 @@ static int __init cosa_init(void)
goto out;
}
} else {
if (!(cosa_major=register_chrdev(0, "cosa", &cosa_fops))) {
cosa_major = register_chrdev(0, "cosa", &cosa_fops);
if (!cosa_major) {
pr_warn("unable to register chardev\n");
err = -EIO;
goto out;
}
}
for (i=0; i<MAX_CARDS; i++)
for (i = 0; i < MAX_CARDS; i++)
cosa_cards[i].num = -1;
for (i=0; io[i] != 0 && i < MAX_CARDS; i++)
for (i = 0; io[i] != 0 && i < MAX_CARDS; i++)
cosa_probe(io[i], irq[i], dma[i]);
if (!nr_cards) {
pr_warn("no devices found\n");
......@@ -426,7 +421,7 @@ static const struct net_device_ops cosa_ops = {
static int cosa_probe(int base, int irq, int dma)
{
struct cosa_data *cosa = cosa_cards+nr_cards;
struct cosa_data *cosa = cosa_cards + nr_cards;
int i, err = 0;
memset(cosa, 0, sizeof(struct cosa_data));
......@@ -438,7 +433,8 @@ static int cosa_probe(int base, int irq, int dma)
return -1;
}
/* I/O address should be between 0x100 and 0x3ff and should be
* multiple of 8. */
* multiple of 8.
*/
if (base < 0x100 || base > 0x3ff || base & 0x7) {
pr_info("invalid I/O address 0x%x\n", base);
return -1;
......@@ -448,8 +444,9 @@ static int cosa_probe(int base, int irq, int dma)
pr_info("invalid DMA %d\n", dma);
return -1;
}
/* and finally, on 16-bit COSA DMA should be 4-7 and
* I/O base should not be multiple of 0x10 */
/* and finally, on 16-bit COSA DMA should be 4-7 and
* I/O base should not be multiple of 0x10
*/
if (((base & 0x8) && dma < 4) || (!(base & 0x8) && dma > 3)) {
pr_info("8/16 bit base and DMA mismatch (base=0x%x, dma=%d)\n",
base, dma);
......@@ -458,12 +455,12 @@ static int cosa_probe(int base, int irq, int dma)
cosa->dma = dma;
cosa->datareg = base;
cosa->statusreg = is_8bit(cosa)?base+1:base+2;
cosa->statusreg = is_8bit(cosa) ? base + 1 : base + 2;
spin_lock_init(&cosa->lock);
if (!request_region(base, is_8bit(cosa)?2:4,"cosa"))
if (!request_region(base, is_8bit(cosa) ? 2 : 4, "cosa"))
return -1;
if (cosa_reset_and_read_id(cosa, cosa->id_string) < 0) {
printk(KERN_DEBUG "probe at 0x%x failed.\n", base);
err = -1;
......@@ -471,11 +468,11 @@ static int cosa_probe(int base, int irq, int dma)
}
/* Test the validity of identification string */
if (!strncmp(cosa->id_string, "SRP", 3))
if (!strncmp(cosa->id_string, "SRP", 3)) {
cosa->type = "srp";
else if (!strncmp(cosa->id_string, "COSA", 4))
cosa->type = is_8bit(cosa)? "cosa8": "cosa16";
else {
} else if (!strncmp(cosa->id_string, "COSA", 4)) {
cosa->type = is_8bit(cosa) ? "cosa8" : "cosa16";
} else {
/* Print a warning only if we are not autoprobing */
#ifndef COSA_ISA_AUTOPROBE
pr_info("valid signature not found at 0x%x\n", base);
......@@ -483,9 +480,9 @@ static int cosa_probe(int base, int irq, int dma)
err = -1;
goto err_out;
}
/* Update the name of the region now we know the type of card */
release_region(base, is_8bit(cosa)?2:4);
if (!request_region(base, is_8bit(cosa)?2:4, cosa->type)) {
/* Update the name of the region now we know the type of card */
release_region(base, is_8bit(cosa) ? 2 : 4);
if (!request_region(base, is_8bit(cosa) ? 2 : 4, cosa->type)) {
printk(KERN_DEBUG "changing name at 0x%x failed.\n", base);
return -1;
}
......@@ -495,8 +492,7 @@ static int cosa_probe(int base, int irq, int dma)
unsigned long irqs;
/* pr_info("IRQ autoprobe\n"); */
irqs = probe_irq_on();
/*
* Enable interrupt on tx buffer empty (it sure is)
/* Enable interrupt on tx buffer empty (it sure is)
* really sure ?
* FIXME: When this code is not used as module, we should
* probably call udelay() instead of the interruptible sleep.
......@@ -536,8 +532,8 @@ static int cosa_probe(int base, int irq, int dma)
err = -1;
goto err_out1;
}
cosa->bouncebuf = kmalloc(COSA_MTU, GFP_KERNEL|GFP_DMA);
cosa->bouncebuf = kmalloc(COSA_MTU, GFP_KERNEL | GFP_DMA);
if (!cosa->bouncebuf) {
err = -ENOMEM;
goto err_out2;
......@@ -563,7 +559,8 @@ static int cosa_probe(int base, int irq, int dma)
sema_init(&chan->wsem, 1);
/* Register the network interface */
if (!(chan->netdev = alloc_hdlcdev(chan))) {
chan->netdev = alloc_hdlcdev(chan);
if (!chan->netdev) {
pr_warn("%s: alloc_hdlcdev failed\n", chan->name);
err = -ENOMEM;
goto err_hdlcdev;
......@@ -603,12 +600,11 @@ static int cosa_probe(int base, int irq, int dma)
err_out1:
free_irq(cosa->irq, cosa);
err_out:
release_region(cosa->datareg,is_8bit(cosa)?2:4);
release_region(cosa->datareg, is_8bit(cosa) ? 2 : 4);
pr_notice("cosa%d: allocating resources failed\n", cosa->num);
return err;
}
/*---------- network device ---------- */
static int cosa_net_attach(struct net_device *dev, unsigned short encoding,
......@@ -659,7 +655,7 @@ static int cosa_net_open(struct net_device *dev)
}
static netdev_tx_t cosa_net_tx(struct sk_buff *skb,
struct net_device *dev)
struct net_device *dev)
{
struct channel_data *chan = dev_to_chan(dev);
......@@ -714,13 +710,12 @@ static int cosa_net_close(struct net_device *dev)
static char *cosa_net_setup_rx(struct channel_data *chan, int size)
{
/*
* We can safely fall back to non-dma-able memory, because we have
/* We can safely fall back to non-dma-able memory, because we have
* the cosa->bouncebuf pre-allocated.
*/
kfree_skb(chan->rx_skb);
chan->rx_skb = dev_alloc_skb(size);
if (chan->rx_skb == NULL) {
if (!chan->rx_skb) {
pr_notice("%s: Memory squeeze, dropping packet\n", chan->name);
chan->netdev->stats.rx_dropped++;
return NULL;
......@@ -767,7 +762,7 @@ static int cosa_net_tx_done(struct channel_data *chan, int size)
/*---------- Character device ---------- */
static ssize_t cosa_read(struct file *file,
char __user *buf, size_t count, loff_t *ppos)
char __user *buf, size_t count, loff_t *ppos)
{
DECLARE_WAITQUEUE(wait, current);
unsigned long flags;
......@@ -782,9 +777,9 @@ static ssize_t cosa_read(struct file *file,
}
if (mutex_lock_interruptible(&chan->rlock))
return -ERESTARTSYS;
chan->rxdata = kmalloc(COSA_MTU, GFP_DMA|GFP_KERNEL);
if (chan->rxdata == NULL) {
chan->rxdata = kmalloc(COSA_MTU, GFP_DMA | GFP_KERNEL);
if (!chan->rxdata) {
mutex_unlock(&chan->rlock);
return -ENOMEM;
}
......@@ -840,9 +835,8 @@ static int chrdev_rx_done(struct channel_data *chan)
return 1;
}
static ssize_t cosa_write(struct file *file,
const char __user *buf, size_t count, loff_t *ppos)
const char __user *buf, size_t count, loff_t *ppos)
{
DECLARE_WAITQUEUE(wait, current);
struct channel_data *chan = file->private_data;
......@@ -860,10 +854,10 @@ static ssize_t cosa_write(struct file *file,
if (count > COSA_MTU)
count = COSA_MTU;
/* Allocate the buffer */
kbuf = kmalloc(count, GFP_KERNEL|GFP_DMA);
if (kbuf == NULL) {
kbuf = kmalloc(count, GFP_KERNEL | GFP_DMA);
if (!kbuf) {
up(&chan->wsem);
return -ENOMEM;
}
......@@ -872,7 +866,7 @@ static ssize_t cosa_write(struct file *file,
kfree(kbuf);
return -EFAULT;
}
chan->tx_status=0;
chan->tx_status = 0;
cosa_start_tx(chan, kbuf, count);
spin_lock_irqsave(&cosa->lock, flags);
......@@ -927,20 +921,20 @@ static int cosa_open(struct inode *inode, struct file *file)
int ret = 0;
mutex_lock(&cosa_chardev_mutex);
if ((n=iminor(file_inode(file))>>CARD_MINOR_BITS)
>= nr_cards) {
n = iminor(file_inode(file)) >> CARD_MINOR_BITS;
if (n >= nr_cards) {
ret = -ENODEV;
goto out;
}
cosa = cosa_cards+n;
cosa = cosa_cards + n;
if ((n=iminor(file_inode(file))
& ((1<<CARD_MINOR_BITS)-1)) >= cosa->nchannels) {
n = iminor(file_inode(file)) & ((1 << CARD_MINOR_BITS) - 1);
if (n >= cosa->nchannels) {
ret = -ENODEV;
goto out;
}
chan = cosa->chan + n;
file->private_data = chan;
spin_lock_irqsave(&cosa->lock, flags);
......@@ -982,26 +976,25 @@ static struct fasync_struct *fasync[256] = { NULL, };
/* To be done ... */
static int cosa_fasync(struct inode *inode, struct file *file, int on)
{
int port = iminor(inode);
int port = iminor(inode);
return fasync_helper(inode, file, on, &fasync[port]);
}
#endif
/* ---------- Ioctls ---------- */
/*
* Ioctl subroutines can safely be made inline, because they are called
/* Ioctl subroutines can safely be made inline, because they are called
* only from cosa_ioctl().
*/
static inline int cosa_reset(struct cosa_data *cosa)
{
char idstring[COSA_MAX_ID_STRING];
if (cosa->usage > 1)
pr_info("cosa%d: WARNING: reset requested with cosa->usage > 1 (%d). Odd things may happen.\n",
cosa->num, cosa->usage);
cosa->firmware_status &= ~(COSA_FW_RESET|COSA_FW_START);
cosa->firmware_status &= ~(COSA_FW_RESET | COSA_FW_START);
if (cosa_reset_and_read_id(cosa, idstring) < 0) {
pr_notice("cosa%d: reset failed\n", cosa->num);
return -EIO;
......@@ -1025,7 +1018,7 @@ static inline int cosa_download(struct cosa_data *cosa, void __user *arg)
cosa->name, cosa->firmware_status);
return -EPERM;
}
if (copy_from_user(&d, arg, sizeof(d)))
return -EFAULT;
......@@ -1034,9 +1027,8 @@ static inline int cosa_download(struct cosa_data *cosa, void __user *arg)
if (d.len < 0 || d.len > COSA_MAX_FIRMWARE_SIZE)
return -EINVAL;
/* If something fails, force the user to reset the card */
cosa->firmware_status &= ~(COSA_FW_RESET|COSA_FW_DOWNLOAD);
cosa->firmware_status &= ~(COSA_FW_RESET | COSA_FW_DOWNLOAD);
i = download(cosa, d.code, d.len, d.addr);
if (i < 0) {
......@@ -1046,7 +1038,7 @@ static inline int cosa_download(struct cosa_data *cosa, void __user *arg)
}
pr_info("cosa%d: downloading microcode - 0x%04x bytes at 0x%04x\n",
cosa->num, d.len, d.addr);
cosa->firmware_status |= COSA_FW_RESET|COSA_FW_DOWNLOAD;
cosa->firmware_status |= COSA_FW_RESET | COSA_FW_DOWNLOAD;
return 0;
}
......@@ -1091,14 +1083,15 @@ static inline int cosa_start(struct cosa_data *cosa, int address)
pr_info("cosa%d: WARNING: start microcode requested with cosa->usage > 1 (%d). Odd things may happen.\n",
cosa->num, cosa->usage);
if ((cosa->firmware_status & (COSA_FW_RESET|COSA_FW_DOWNLOAD))
!= (COSA_FW_RESET|COSA_FW_DOWNLOAD)) {
if ((cosa->firmware_status & (COSA_FW_RESET | COSA_FW_DOWNLOAD))
!= (COSA_FW_RESET | COSA_FW_DOWNLOAD)) {
pr_notice("%s: download the microcode and/or reset the card first (status %d)\n",
cosa->name, cosa->firmware_status);
return -EPERM;
}
cosa->firmware_status &= ~COSA_FW_RESET;
if ((i=startmicrocode(cosa, address)) < 0) {
i = startmicrocode(cosa, address);
if (i < 0) {
pr_notice("cosa%d: start microcode at 0x%04x failed: %d\n",
cosa->num, address, i);
return -EIO;
......@@ -1108,11 +1101,12 @@ static inline int cosa_start(struct cosa_data *cosa, int address)
cosa->firmware_status |= COSA_FW_START;
return 0;
}
/* Buffer of size at least COSA_MAX_ID_STRING is expected */
static inline int cosa_getidstr(struct cosa_data *cosa, char __user *string)
{
int l = strlen(cosa->id_string)+1;
int l = strlen(cosa->id_string) + 1;
if (copy_to_user(string, cosa->id_string, l))
return -EFAULT;
return l;
......@@ -1121,16 +1115,19 @@ static inline int cosa_getidstr(struct cosa_data *cosa, char __user *string)
/* Buffer of size at least COSA_MAX_ID_STRING is expected */
static inline int cosa_gettype(struct cosa_data *cosa, char __user *string)
{
int l = strlen(cosa->type)+1;
int l = strlen(cosa->type) + 1;
if (copy_to_user(string, cosa->type, l))
return -EFAULT;
return l;
}
static int cosa_ioctl_common(struct cosa_data *cosa,
struct channel_data *channel, unsigned int cmd, unsigned long arg)
struct channel_data *channel, unsigned int cmd,
unsigned long arg)
{
void __user *argp = (void __user *)arg;
switch (cmd) {
case COSAIORSET: /* Reset the device */
if (!capable(CAP_NET_ADMIN))
......@@ -1143,7 +1140,7 @@ static int cosa_ioctl_common(struct cosa_data *cosa,
case COSAIODOWNLD: /* Download the firmware */
if (!capable(CAP_SYS_RAWIO))
return -EACCES;
return cosa_download(cosa, argp);
case COSAIORMEM:
if (!capable(CAP_SYS_RAWIO))
......@@ -1176,6 +1173,7 @@ static int cosa_net_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
{
int rv;
struct channel_data *chan = dev_to_chan(dev);
rv = cosa_ioctl_common(chan->cosa, chan, cmd,
(unsigned long)ifr->ifr_data);
if (rv != -ENOIOCTLCMD)
......@@ -1184,7 +1182,7 @@ static int cosa_net_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
}
static long cosa_chardev_ioctl(struct file *file, unsigned int cmd,
unsigned long arg)
unsigned long arg)
{
struct channel_data *channel = file->private_data;
struct cosa_data *cosa;
......@@ -1197,11 +1195,9 @@ static long cosa_chardev_ioctl(struct file *file, unsigned int cmd,
return ret;
}
/*---------- HW layer interface ---------- */
/*
* The higher layer can bind itself to the HW layer by setting the callbacks
/* The higher layer can bind itself to the HW layer by setting the callbacks
* in the channel_data structure and by using these routines.
*/
static void cosa_enable_rx(struct channel_data *chan)
......@@ -1220,8 +1216,7 @@ static void cosa_disable_rx(struct channel_data *chan)
put_driver_status(cosa);
}
/*
* FIXME: This routine probably should check for cosa_start_tx() called when
/* FIXME: This routine probably should check for cosa_start_tx() called when
* the previous transmit is still unfinished. In this case the non-zero
* return value should indicate to the caller that the queuing(sp?) up
* the transmit has failed.
......@@ -1235,7 +1230,7 @@ static int cosa_start_tx(struct channel_data *chan, char *buf, int len)
pr_info("cosa%dc%d: starting tx(0x%x)",
chan->cosa->num, chan->num, len);
for (i=0; i<len; i++)
for (i = 0; i < len; i++)
pr_cont(" %02x", buf[i]&0xff);
pr_cont("\n");
#endif
......@@ -1262,10 +1257,10 @@ static void put_driver_status(struct cosa_data *cosa)
status = (cosa->rxbitmap ? DRIVER_RX_READY : 0)
| (cosa->txbitmap ? DRIVER_TX_READY : 0)
| (cosa->txbitmap? ~(cosa->txbitmap<<DRIVER_TXMAP_SHIFT)
&DRIVER_TXMAP_MASK : 0);
| (cosa->txbitmap ? ~(cosa->txbitmap << DRIVER_TXMAP_SHIFT)
& DRIVER_TXMAP_MASK : 0);
if (!cosa->rxtx) {
if (cosa->rxbitmap|cosa->txbitmap) {
if (cosa->rxbitmap | cosa->txbitmap) {
if (!cosa->enabled) {
cosa_putstatus(cosa, SR_RX_INT_ENA);
#ifdef DEBUG_IO
......@@ -1294,10 +1289,10 @@ static void put_driver_status_nolock(struct cosa_data *cosa)
status = (cosa->rxbitmap ? DRIVER_RX_READY : 0)
| (cosa->txbitmap ? DRIVER_TX_READY : 0)
| (cosa->txbitmap? ~(cosa->txbitmap<<DRIVER_TXMAP_SHIFT)
&DRIVER_TXMAP_MASK : 0);
| (cosa->txbitmap ? ~(cosa->txbitmap << DRIVER_TXMAP_SHIFT)
& DRIVER_TXMAP_MASK : 0);
if (cosa->rxbitmap|cosa->txbitmap) {
if (cosa->rxbitmap | cosa->txbitmap) {
cosa_putstatus(cosa, SR_RX_INT_ENA);
#ifdef DEBUG_IO
debug_status_out(cosa, SR_RX_INT_ENA);
......@@ -1316,8 +1311,7 @@ static void put_driver_status_nolock(struct cosa_data *cosa)
#endif
}
/*
* The "kickme" function: When the DMA times out, this is called to
/* The "kickme" function: When the DMA times out, this is called to
* clean up the driver status.
* FIXME: Preliminary support, the interface is probably wrong.
*/
......@@ -1344,7 +1338,7 @@ static void cosa_kick(struct cosa_data *cosa)
udelay(100);
cosa_putstatus(cosa, 0);
udelay(100);
(void) cosa_getdata8(cosa);
(void)cosa_getdata8(cosa);
udelay(100);
cosa_putdata8(cosa, 0);
udelay(100);
......@@ -1352,8 +1346,7 @@ static void cosa_kick(struct cosa_data *cosa)
spin_unlock_irqrestore(&cosa->lock, flags);
}
/*
* Check if the whole buffer is DMA-able. It means it is below the 16M of
/* Check if the whole buffer is DMA-able. It means it is below the 16M of
* physical memory and doesn't span the 64k boundary. For now it seems
* SKB's never do this, but we'll check this anyway.
*/
......@@ -1361,9 +1354,10 @@ static int cosa_dma_able(struct channel_data *chan, char *buf, int len)
{
static int count;
unsigned long b = (unsigned long)buf;
if (b+len >= MAX_DMA_ADDRESS)
if (b + len >= MAX_DMA_ADDRESS)
return 0;
if ((b^ (b+len)) & 0x10000) {
if ((b ^ (b + len)) & 0x10000) {
if (count++ < 5)
pr_info("%s: packet spanning a 64k boundary\n",
chan->name);
......@@ -1372,11 +1366,9 @@ static int cosa_dma_able(struct channel_data *chan, char *buf, int len)
return 1;
}
/* ---------- The SRP/COSA ROM monitor functions ---------- */
/*
* Downloading SRP microcode: say "w" to SRP monitor, it answers by "w=",
/* Downloading SRP microcode: say "w" to SRP monitor, it answers by "w=",
* drivers need to say 4-digit hex number meaning start address of the microcode
* separated by a single space. Monitor replies by saying " =". Now driver
* has to write 4-digit hex number meaning the last byte address ended
......@@ -1387,18 +1379,27 @@ static int download(struct cosa_data *cosa, const char __user *microcode, int le
{
int i;
if (put_wait_data(cosa, 'w') == -1) return -1;
if (put_wait_data(cosa, 'w') == -1)
return -1;
if ((i=get_wait_data(cosa)) != 'w') { printk("dnld: 0x%04x\n",i); return -2;}
if (get_wait_data(cosa) != '=') return -3;
if (puthexnumber(cosa, address) < 0) return -4;
if (put_wait_data(cosa, ' ') == -1) return -10;
if (get_wait_data(cosa) != ' ') return -11;
if (get_wait_data(cosa) != '=') return -12;
if (puthexnumber(cosa, address+length-1) < 0) return -13;
if (put_wait_data(cosa, ' ') == -1) return -18;
if (get_wait_data(cosa) != ' ') return -19;
if (get_wait_data(cosa) != '=')
return -3;
if (puthexnumber(cosa, address) < 0)
return -4;
if (put_wait_data(cosa, ' ') == -1)
return -10;
if (get_wait_data(cosa) != ' ')
return -11;
if (get_wait_data(cosa) != '=')
return -12;
if (puthexnumber(cosa, address + length - 1) < 0)
return -13;
if (put_wait_data(cosa, ' ') == -1)
return -18;
if (get_wait_data(cosa) != ' ')
return -19;
while (length--) {
char c;
......@@ -1413,43 +1414,53 @@ static int download(struct cosa_data *cosa, const char __user *microcode, int le
microcode++;
}
if (get_wait_data(cosa) != '\r') return -21;
if (get_wait_data(cosa) != '\n') return -22;
if (get_wait_data(cosa) != '.') return -23;
if (get_wait_data(cosa) != '\r')
return -21;
if (get_wait_data(cosa) != '\n')
return -22;
if (get_wait_data(cosa) != '.')
return -23;
#if 0
printk(KERN_DEBUG "cosa%d: download completed.\n", cosa->num);
#endif
return 0;
}
/*
* Starting microcode is done via the "g" command of the SRP monitor.
/* Starting microcode is done via the "g" command of the SRP monitor.
* The chat should be the following: "g" "g=" "<addr><CR>"
* "<CR><CR><LF><CR><LF>".
*/
static int startmicrocode(struct cosa_data *cosa, int address)
{
if (put_wait_data(cosa, 'g') == -1) return -1;
if (get_wait_data(cosa) != 'g') return -2;
if (get_wait_data(cosa) != '=') return -3;
if (puthexnumber(cosa, address) < 0) return -4;
if (put_wait_data(cosa, '\r') == -1) return -5;
if (get_wait_data(cosa) != '\r') return -6;
if (get_wait_data(cosa) != '\r') return -7;
if (get_wait_data(cosa) != '\n') return -8;
if (get_wait_data(cosa) != '\r') return -9;
if (get_wait_data(cosa) != '\n') return -10;
if (put_wait_data(cosa, 'g') == -1)
return -1;
if (get_wait_data(cosa) != 'g')
return -2;
if (get_wait_data(cosa) != '=')
return -3;
if (puthexnumber(cosa, address) < 0)
return -4;
if (put_wait_data(cosa, '\r') == -1)
return -5;
if (get_wait_data(cosa) != '\r')
return -6;
if (get_wait_data(cosa) != '\r')
return -7;
if (get_wait_data(cosa) != '\n')
return -8;
if (get_wait_data(cosa) != '\r')
return -9;
if (get_wait_data(cosa) != '\n')
return -10;
#if 0
printk(KERN_DEBUG "cosa%d: microcode started\n", cosa->num);
#endif
return 0;
}
/*
* Reading memory is done via the "r" command of the SRP monitor.
/* Reading memory is done via the "r" command of the SRP monitor.
* The chat is the following "r" "r=" "<addr> " " =" "<last_byte> " " "
* Then driver can read the data and the conversation is finished
* by SRP monitor sending "<CR><LF>." (dot at the end).
......@@ -1459,27 +1470,39 @@ static int startmicrocode(struct cosa_data *cosa, int address)
*/
static int readmem(struct cosa_data *cosa, char __user *microcode, int length, int address)
{
if (put_wait_data(cosa, 'r') == -1) return -1;
if ((get_wait_data(cosa)) != 'r') return -2;
if ((get_wait_data(cosa)) != '=') return -3;
if (puthexnumber(cosa, address) < 0) return -4;
if (put_wait_data(cosa, ' ') == -1) return -5;
if (get_wait_data(cosa) != ' ') return -6;
if (get_wait_data(cosa) != '=') return -7;
if (puthexnumber(cosa, address+length-1) < 0) return -8;
if (put_wait_data(cosa, ' ') == -1) return -9;
if (get_wait_data(cosa) != ' ') return -10;
if (put_wait_data(cosa, 'r') == -1)
return -1;
if ((get_wait_data(cosa)) != 'r')
return -2;
if ((get_wait_data(cosa)) != '=')
return -3;
if (puthexnumber(cosa, address) < 0)
return -4;
if (put_wait_data(cosa, ' ') == -1)
return -5;
if (get_wait_data(cosa) != ' ')
return -6;
if (get_wait_data(cosa) != '=')
return -7;
if (puthexnumber(cosa, address + length - 1) < 0)
return -8;
if (put_wait_data(cosa, ' ') == -1)
return -9;
if (get_wait_data(cosa) != ' ')
return -10;
while (length--) {
char c;
int i;
if ((i=get_wait_data(cosa)) == -1) {
i = get_wait_data(cosa);
if (i == -1) {
pr_info("0x%04x bytes remaining\n", length);
return -11;
}
c=i;
c = i;
#if 1
if (put_user(c, microcode))
return -23; /* ??? */
......@@ -1489,22 +1512,24 @@ static int readmem(struct cosa_data *cosa, char __user *microcode, int length, i
microcode++;
}
if (get_wait_data(cosa) != '\r') return -21;
if (get_wait_data(cosa) != '\n') return -22;
if (get_wait_data(cosa) != '.') return -23;
if (get_wait_data(cosa) != '\r')
return -21;
if (get_wait_data(cosa) != '\n')
return -22;
if (get_wait_data(cosa) != '.')
return -23;
#if 0
printk(KERN_DEBUG "cosa%d: readmem completed.\n", cosa->num);
#endif
return 0;
}
/*
* This function resets the device and reads the initial prompt
/* This function resets the device and reads the initial prompt
* of the device's ROM monitor.
*/
static int cosa_reset_and_read_id(struct cosa_data *cosa, char *idstring)
{
int i=0, id=0, prev=0, curr=0;
int i = 0, id = 0, prev = 0, curr = 0;
/* Reset the card ... */
cosa_putstatus(cosa, 0);
......@@ -1514,18 +1539,18 @@ static int cosa_reset_and_read_id(struct cosa_data *cosa, char *idstring)
/* Disable all IRQs from the card */
cosa_putstatus(cosa, 0);
/*
* Try to read the ID string. The card then prints out the
/* Try to read the ID string. The card then prints out the
* identification string ended by the "\n\x2e".
*
* The following loop is indexed through i (instead of id)
* to avoid looping forever when for any reason
* the port returns '\r', '\n' or '\x2e' permanently.
*/
for (i=0; i<COSA_MAX_ID_STRING-1; i++, prev=curr) {
if ((curr = get_wait_data(cosa)) == -1) {
for (i = 0; i < COSA_MAX_ID_STRING - 1; i++, prev = curr) {
curr = get_wait_data(cosa);
if (curr == -1)
return -1;
}
curr &= 0xff;
if (curr != '\r' && curr != '\n' && curr != 0x2e)
idstring[id++] = curr;
......@@ -1537,11 +1562,9 @@ static int cosa_reset_and_read_id(struct cosa_data *cosa, char *idstring)
return id;
}
/* ---------- Auxiliary routines for COSA/SRP monitor ---------- */
/*
* This routine gets the data byte from the card waiting for the SR_RX_RDY
/* This routine gets the data byte from the card waiting for the SR_RX_RDY
* bit to be set in a loop. It should be used in the exceptional cases
* only (for example when resetting the card or downloading the firmware.
*/
......@@ -1553,10 +1576,11 @@ static int get_wait_data(struct cosa_data *cosa)
/* read data and return them */
if (cosa_getstatus(cosa) & SR_RX_RDY) {
short r;
r = cosa_getdata8(cosa);
#if 0
pr_info("get_wait_data returning after %d retries\n",
999-retries);
999 - retries);
#endif
return r;
}
......@@ -1568,20 +1592,20 @@ static int get_wait_data(struct cosa_data *cosa)
return -1;
}
/*
* This routine puts the data byte to the card waiting for the SR_TX_RDY
/* This routine puts the data byte to the card waiting for the SR_TX_RDY
* bit to be set in a loop. It should be used in the exceptional cases
* only (for example when resetting the card or downloading the firmware).
*/
static int put_wait_data(struct cosa_data *cosa, int data)
{
int retries = 1000;
while (--retries) {
/* read data and return them */
if (cosa_getstatus(cosa) & SR_TX_RDY) {
cosa_putdata8(cosa, data);
#if 0
pr_info("Putdata: %d retries\n", 999-retries);
pr_info("Putdata: %d retries\n", 999 - retries);
#endif
return 0;
}
......@@ -1594,9 +1618,8 @@ static int put_wait_data(struct cosa_data *cosa, int data)
cosa->num, cosa_getstatus(cosa));
return -1;
}
/*
* The following routine puts the hexadecimal number into the SRP monitor
/* The following routine puts the hexadecimal number into the SRP monitor
* and verifies the proper echo of the sent bytes. Returns 0 on success,
* negative number on failure (-1,-3,-5,-7) means that put_wait_data() failed,
* (-2,-4,-6,-8) means that reading echo failed.
......@@ -1608,26 +1631,24 @@ static int puthexnumber(struct cosa_data *cosa, int number)
/* Well, I should probably replace this by something faster. */
sprintf(temp, "%04X", number);
for (i=0; i<4; i++) {
for (i = 0; i < 4; i++) {
if (put_wait_data(cosa, temp[i]) == -1) {
pr_notice("cosa%d: puthexnumber failed to write byte %d\n",
cosa->num, i);
return -1-2*i;
return -1 - 2 * i;
}
if (get_wait_data(cosa) != temp[i]) {
pr_notice("cosa%d: puthexhumber failed to read echo of byte %d\n",
cosa->num, i);
return -2-2*i;
return -2 - 2 * i;
}
}
return 0;
}
/* ---------- Interrupt routines ---------- */
/*
* There are three types of interrupt:
/* There are three types of interrupt:
* At the beginning of transmit - this handled is in tx_interrupt(),
* at the beginning of receive - it is in rx_interrupt() and
* at the end of transmit/receive - it is the eot_interrupt() function.
......@@ -1635,14 +1656,13 @@ static int puthexnumber(struct cosa_data *cosa, int number)
* COSA status byte. I have moved the rx/tx/eot interrupt handling into
* separate functions to make it more readable. These functions are inline,
* so there should be no overhead of function call.
*
*
* In the COSA bus-master mode, we need to tell the card the address of a
* buffer. Unfortunately, COSA may be too slow for us, so we must busy-wait.
* It's time to use the bottom half :-(
*/
/*
* Transmit interrupt routine - called when COSA is willing to obtain
/* Transmit interrupt routine - called when COSA is willing to obtain
* data from the OS. The most tricky part of the routine is selection
* of channel we (OS) want to send packet for. For SRP we should probably
* use the round-robin approach. The newer COSA firmwares have a simple
......@@ -1667,7 +1687,8 @@ static inline void tx_interrupt(struct cosa_data *cosa, int status)
set_bit(TXBIT, &cosa->rxtx);
if (!test_bit(IRQBIT, &cosa->rxtx)) {
/* flow control, see the comment above */
int i=0;
int i = 0;
if (!cosa->txbitmap) {
pr_warn("%s: No channel wants data in TX IRQ. Expect DMA timeout.\n",
cosa->name);
......@@ -1681,9 +1702,10 @@ static inline void tx_interrupt(struct cosa_data *cosa, int status)
i++;
if (cosa->txchan >= cosa->nchannels)
cosa->txchan = 0;
if (!(cosa->txbitmap & (1<<cosa->txchan)))
if (!(cosa->txbitmap & (1 << cosa->txchan)))
continue;
if (~status & (1 << (cosa->txchan+DRIVER_TXMAP_SHIFT)))
if (~status &
(1 << (cosa->txchan + DRIVER_TXMAP_SHIFT)))
break;
/* in second pass, accept first ready-to-TX channel */
if (i > cosa->nchannels) {
......@@ -1698,12 +1720,13 @@ static inline void tx_interrupt(struct cosa_data *cosa, int status)
}
cosa->txsize = cosa->chan[cosa->txchan].txsize;
if (cosa_dma_able(cosa->chan+cosa->txchan,
cosa->chan[cosa->txchan].txbuf, cosa->txsize)) {
if (cosa_dma_able(cosa->chan + cosa->txchan,
cosa->chan[cosa->txchan].txbuf,
cosa->txsize)) {
cosa->txbuf = cosa->chan[cosa->txchan].txbuf;
} else {
memcpy(cosa->bouncebuf, cosa->chan[cosa->txchan].txbuf,
cosa->txsize);
cosa->txsize);
cosa->txbuf = cosa->bouncebuf;
}
}
......@@ -1711,12 +1734,12 @@ static inline void tx_interrupt(struct cosa_data *cosa, int status)
if (is_8bit(cosa)) {
if (!test_bit(IRQBIT, &cosa->rxtx)) {
cosa_putstatus(cosa, SR_TX_INT_ENA);
cosa_putdata8(cosa, ((cosa->txchan << 5) & 0xe0)|
cosa_putdata8(cosa, ((cosa->txchan << 5) & 0xe0) |
((cosa->txsize >> 8) & 0x1f));
#ifdef DEBUG_IO
debug_status_out(cosa, SR_TX_INT_ENA);
debug_data_out(cosa, ((cosa->txchan << 5) & 0xe0)|
((cosa->txsize >> 8) & 0x1f));
debug_data_out(cosa, ((cosa->txchan << 5) & 0xe0) |
((cosa->txsize >> 8) & 0x1f));
debug_data_in(cosa, cosa_getdata8(cosa));
#else
cosa_getdata8(cosa);
......@@ -1727,20 +1750,20 @@ static inline void tx_interrupt(struct cosa_data *cosa, int status)
} else {
clear_bit(IRQBIT, &cosa->rxtx);
cosa_putstatus(cosa, 0);
cosa_putdata8(cosa, cosa->txsize&0xff);
cosa_putdata8(cosa, cosa->txsize & 0xff);
#ifdef DEBUG_IO
debug_status_out(cosa, 0);
debug_data_out(cosa, cosa->txsize&0xff);
debug_data_out(cosa, cosa->txsize & 0xff);
#endif
}
} else {
cosa_putstatus(cosa, SR_TX_INT_ENA);
cosa_putdata16(cosa, ((cosa->txchan<<13) & 0xe000)
cosa_putdata16(cosa, ((cosa->txchan << 13) & 0xe000)
| (cosa->txsize & 0x1fff));
#ifdef DEBUG_IO
debug_status_out(cosa, SR_TX_INT_ENA);
debug_data_out(cosa, ((cosa->txchan<<13) & 0xe000)
| (cosa->txsize & 0x1fff));
debug_data_out(cosa, ((cosa->txchan << 13) & 0xe000) |
(cosa->txsize & 0x1fff));
debug_data_in(cosa, cosa_getdata8(cosa));
debug_status_out(cosa, 0);
#else
......@@ -1751,25 +1774,28 @@ static inline void tx_interrupt(struct cosa_data *cosa, int status)
if (cosa->busmaster) {
unsigned long addr = virt_to_bus(cosa->txbuf);
int count=0;
int count = 0;
pr_info("busmaster IRQ\n");
while (!(cosa_getstatus(cosa)&SR_TX_RDY)) {
while (!(cosa_getstatus(cosa) & SR_TX_RDY)) {
count++;
udelay(10);
if (count > 1000) break;
if (count > 1000)
break;
}
pr_info("status %x\n", cosa_getstatus(cosa));
pr_info("ready after %d loops\n", count);
cosa_putdata16(cosa, (addr >> 16)&0xffff);
cosa_putdata16(cosa, (addr >> 16) & 0xffff);
count = 0;
while (!(cosa_getstatus(cosa)&SR_TX_RDY)) {
while (!(cosa_getstatus(cosa) & SR_TX_RDY)) {
count++;
if (count > 1000) break;
if (count > 1000)
break;
udelay(10);
}
pr_info("ready after %d loops\n", count);
cosa_putdata16(cosa, addr &0xffff);
cosa_putdata16(cosa, addr & 0xffff);
flags1 = claim_dma_lock();
set_dma_mode(cosa->dma, DMA_MODE_CASCADE);
enable_dma(cosa->dma);
......@@ -1785,9 +1811,9 @@ static inline void tx_interrupt(struct cosa_data *cosa, int status)
enable_dma(cosa->dma);
release_dma_lock(flags1);
}
cosa_putstatus(cosa, SR_TX_DMA_ENA|SR_USR_INT_ENA);
cosa_putstatus(cosa, SR_TX_DMA_ENA | SR_USR_INT_ENA);
#ifdef DEBUG_IO
debug_status_out(cosa, SR_TX_DMA_ENA|SR_USR_INT_ENA);
debug_status_out(cosa, SR_TX_DMA_ENA | SR_USR_INT_ENA);
#endif
spin_unlock_irqrestore(&cosa->lock, flags);
}
......@@ -1806,7 +1832,7 @@ static inline void rx_interrupt(struct cosa_data *cosa, int status)
if (!test_bit(IRQBIT, &cosa->rxtx)) {
set_bit(IRQBIT, &cosa->rxtx);
put_driver_status_nolock(cosa);
cosa->rxsize = cosa_getdata8(cosa) <<8;
cosa->rxsize = cosa_getdata8(cosa) << 8;
#ifdef DEBUG_IO
debug_data_in(cosa, cosa->rxsize >> 8);
#endif
......@@ -1859,20 +1885,20 @@ static inline void rx_interrupt(struct cosa_data *cosa, int status)
disable_dma(cosa->dma);
clear_dma_ff(cosa->dma);
set_dma_mode(cosa->dma, DMA_MODE_READ);
if (cosa_dma_able(cosa->rxchan, cosa->rxbuf, cosa->rxsize & 0x1fff)) {
if (cosa_dma_able(cosa->rxchan, cosa->rxbuf, cosa->rxsize & 0x1fff))
set_dma_addr(cosa->dma, virt_to_bus(cosa->rxbuf));
} else {
else
set_dma_addr(cosa->dma, virt_to_bus(cosa->bouncebuf));
}
set_dma_count(cosa->dma, (cosa->rxsize&0x1fff));
set_dma_count(cosa->dma, (cosa->rxsize & 0x1fff));
enable_dma(cosa->dma);
release_dma_lock(flags);
spin_lock_irqsave(&cosa->lock, flags);
cosa_putstatus(cosa, SR_RX_DMA_ENA|SR_USR_INT_ENA);
cosa_putstatus(cosa, SR_RX_DMA_ENA | SR_USR_INT_ENA);
if (!is_8bit(cosa) && (status & SR_TX_RDY))
cosa_putdata8(cosa, DRIVER_RX_READY);
#ifdef DEBUG_IO
debug_status_out(cosa, SR_RX_DMA_ENA|SR_USR_INT_ENA);
debug_status_out(cosa, SR_RX_DMA_ENA | SR_USR_INT_ENA);
if (!is_8bit(cosa) && (status & SR_TX_RDY))
debug_data_cmd(cosa, DRIVER_RX_READY);
#endif
......@@ -1882,13 +1908,15 @@ static inline void rx_interrupt(struct cosa_data *cosa, int status)
static inline void eot_interrupt(struct cosa_data *cosa, int status)
{
unsigned long flags, flags1;
spin_lock_irqsave(&cosa->lock, flags);
flags1 = claim_dma_lock();
disable_dma(cosa->dma);
clear_dma_ff(cosa->dma);
release_dma_lock(flags1);
if (test_bit(TXBIT, &cosa->rxtx)) {
struct channel_data *chan = cosa->chan+cosa->txchan;
struct channel_data *chan = cosa->chan + cosa->txchan;
if (chan->tx_done)
if (chan->tx_done(chan, cosa->txsize))
clear_bit(chan->num, &cosa->txbitmap);
......@@ -1896,9 +1924,10 @@ static inline void eot_interrupt(struct cosa_data *cosa, int status)
#ifdef DEBUG_DATA
{
int i;
pr_info("cosa%dc%d: done rx(0x%x)",
cosa->num, cosa->rxchan->num, cosa->rxsize);
for (i=0; i<cosa->rxsize; i++)
for (i = 0; i < cosa->rxsize; i++)
pr_cont(" %02x", cosa->rxbuf[i]&0xff);
pr_cont("\n");
}
......@@ -1914,8 +1943,7 @@ static inline void eot_interrupt(struct cosa_data *cosa, int status)
} else {
pr_notice("cosa%d: unexpected EOT interrupt\n", cosa->num);
}
/*
* Clear the RXBIT, TXBIT and IRQBIT (the latest should be
/* Clear the RXBIT, TXBIT and IRQBIT (the latest should be
* cleared anyway). We should do it as soon as possible
* so that we can tell the COSA we are done and to give it a time
* for recovery.
......@@ -1968,10 +1996,8 @@ static irqreturn_t cosa_interrupt(int irq, void *cosa_)
return IRQ_HANDLED;
}
/* ---------- I/O debugging routines ---------- */
/*
* These routines can be used to monitor COSA/SRP I/O and to printk()
/* These routines can be used to monitor COSA/SRP I/O and to printk()
* the data being transferred on the data and status I/O port in a
* readable way.
*/
......@@ -1980,6 +2006,7 @@ static irqreturn_t cosa_interrupt(int irq, void *cosa_)
static void debug_status_in(struct cosa_data *cosa, int status)
{
char *s;
switch (status & SR_CMD_FROM_SRP_MASK) {
case SR_UP_REQUEST:
s = "RX_REQ";
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7