Skip to content

L
linux
Commit 1fe01cb5 authored by Linus Torvalds's avatar Linus Torvalds
Browse files
Options

Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6 

* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (21 commits)
  sh: fix sh2a cache entry_mask
  sh: Enable NFS root in Migo-R defconfig.
  sh: FTRACE renamed to FUNCTION_TRACER.
  sh: Fix up the shared IRQ demuxer's control bit testing logic.
  Define SCSPTR1 for SH 7751R
  sh: Add sci_rxd_in of SH4-202
  Add support usb setting on sh 7366
  sh: Change register name SCSPTR to SCSPTR2
  sh: use the new byteorder headers.
  sh: SHmedia ISA tuning fixups.
  sh: Kill off long-dead HD64465 cchip support.
  sh: Revert "SH 7366 needs SCIF_ONLY"
  sh: Simplify and lock down the ISA tuning.
  sh: sh7785lcr: Select uImage as default image target.
  sh: Add on-chip RTC support for SH7722.
  SH 7366 needs SCIF_ONLY
  gdrom: Fix compile error
  sh: Provide a sample defconfig for the UL2 (SH7366) board.
  sh: Fix FPU tuning on toolchains with mismatched multilib targets.
  sh: oprofile: Fix up the SH7750 performance counter name.
  ...
parents 63b40456 216813a8
Expand all Show whitespace changes
Inline Side-by-side
Showing with 1357 additions and 2094 deletions
Documentation/sh/new-machine.txt
View file @ 1fe01cb5
......@@ -47,9 +47,7 @@ Next, for companion chips:
`-- sh
`-- cchips
`-- hd6446x
|-- hd64461
| `-- cchip-specific files
`-- hd64465
`-- hd64461
`-- cchip-specific files
... and so on. Headers for the companion chips are treated the same way as
......
arch/sh/Kconfig
View file @ 1fe01cb5
......@@ -24,7 +24,7 @@ config SUPERH32
select HAVE_KPROBES
select HAVE_KRETPROBES
select HAVE_ARCH_TRACEHOOK
select HAVE_FTRACE
select HAVE_FUNCTION_TRACER
config SUPERH64
def_bool y if CPU_SH5
......
arch/sh/Makefile
View file @ 1fe01cb5
......@@ -2,7 +2,7 @@
# arch/sh/Makefile
#
# Copyright (C) 1999 Kaz Kojima
# Copyright (C) 2002, 2003, 2004 Paul Mundt
# Copyright (C) 2002 - 2008 Paul Mundt
# Copyright (C) 2002 M. R. Brown
#
# This file is subject to the terms and conditions of the GNU General Public
......@@ -18,15 +18,11 @@ isa-$(CONFIG_CPU_SH4) := sh4
isa-$(CONFIG_CPU_SH4A) := sh4a
isa-$(CONFIG_CPU_SH4AL_DSP) := sh4al
isa-$(CONFIG_CPU_SH5) := shmedia
isa-$(CONFIG_SH_DSP) := $(isa-y)-dsp
ifndef CONFIG_SH_DSP
ifndef CONFIG_SH_FPU
isa-y := $(isa-y)-nofpu
endif
endif
ifeq ($(CONFIG_SUPERH32),y)
isa-$(CONFIG_SH_DSP) := $(isa-y)-dsp
isa-y := $(isa-y)-up
endif
cflags-$(CONFIG_CPU_SH2) := $(call cc-option,-m2,)
cflags-$(CONFIG_CPU_SH2A) += $(call cc-option,-m2a,) \
......@@ -38,6 +34,22 @@ cflags-$(CONFIG_CPU_SH4A) += $(call cc-option,-m4a,) \
$(call cc-option,-m4a-nofpu,)
cflags-$(CONFIG_CPU_SH5) := $(call cc-option,-m5-32media-nofpu,)
ifeq ($(cflags-y),)
#
# In the case where we are stuck with a compiler that has been uselessly
# restricted to a particular ISA, a favourite default of newer GCCs when
# extensive multilib targets are not provided, ensure we get the best fit
# regarding FP generation. This is necessary to avoid references to FP
# variants in libgcc where integer variants exist, which otherwise result
# in link errors. This is intentionally stupid (albeit many orders of
# magnitude less than GCC's default behaviour), as anything with a large
# number of multilib targets better have been built correctly for
# the target in mind.
#
cflags-y += $(shell $(CC) $(KBUILD_CFLAGS) -print-multi-lib | \
grep nofpu | sed q | sed -e 's/^/-/;s/;.*$$//')
endif
cflags-$(CONFIG_CPU_BIG_ENDIAN) += -mb
cflags-$(CONFIG_CPU_LITTLE_ENDIAN) += -ml
......@@ -66,6 +78,7 @@ OBJCOPYFLAGS := -O binary -R .note -R .note.gnu.build-id -R .comment \
# Give the various platforms the opportunity to set default image types
defaultimage-$(CONFIG_SUPERH32) := zImage
defaultimage-$(CONFIG_SH_SH7785LCR) := uImage
# Set some sensible Kbuild defaults
KBUILD_DEFCONFIG := shx3_defconfig
......
arch/sh/boot/compressed/Makefile_32
View file @ 1fe01cb5
......@@ -23,7 +23,7 @@ IMAGE_OFFSET := $(shell /bin/bash -c 'printf "0x%08x" \
LIBGCC := $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name)
ifeq ($(CONFIG_FTRACE),y)
ifeq ($(CONFIG_FUNCTION_TRACER),y)
ORIG_CFLAGS := $(KBUILD_CFLAGS)
KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS))
endif
......
arch/sh/cchips/Kconfig
View file @ 1fe01cb5
......@@ -22,20 +22,6 @@ config HD64461
Say Y if you want support for the HD64461.
Otherwise, say N.
config HD64465
bool "Hitachi HD64465 companion chip support"
---help---
The Hitachi HD64465 provides an interface for
the SH7750 CPU, supporting a LCD controller,
CRT color controller, IrDA, USB, PCMCIA,
keyboard controller, and a printer interface.
More information is available at
<http://global.hitachi.com/New/cnews/E/1998/981019B.html>.
Say Y if you want support for the HD64465.
Otherwise, say N.
endchoice
# These will also be split into the Kconfig's below
......@@ -61,23 +47,4 @@ config HD64461_ENABLER
via the HD64461 companion chip.
Otherwise, say N.
config HD64465_IOBASE
hex "HD64465 start address"
depends on HD64465
default "0xb0000000"
help
The default setting of the HD64465 IO base address is 0xb0000000.
Do not change this unless you know what you are doing.
config HD64465_IRQ
int "HD64465 IRQ"
depends on HD64465
default "5"
help
The default setting of the HD64465 IRQ is 5.
Do not change this unless you know what you are doing.
endmenu
arch/sh/cchips/hd6446x/Makefile
View file @ 1fe01cb5
obj-$(CONFIG_HD64461) += hd64461.o
obj-$(CONFIG_HD64465) += hd64465/
EXTRA_CFLAGS += -Werror
arch/sh/cchips/hd6446x/hd64465/Makefile deleted 100644 → 0
View file @ 63b40456
#
# Makefile for the HD64465
#
obj-y := setup.o io.o gpio.o
arch/sh/cchips/hd6446x/hd64465/gpio.c deleted 100644 → 0
View file @ 63b40456
/*
* $Id: gpio.c,v 1.4 2003/05/19 22:24:18 lethal Exp $
* by Greg Banks <gbanks@pocketpenguins.com>
* (c) 2000 PocketPenguins Inc
*
* GPIO pin support for HD64465 companion chip.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/sched.h>
#include <linux/ioport.h>
#include <asm/io.h>
#include <asm/hd64465/gpio.h>
#define _PORTOF(portpin) (((portpin)>>3)&0x7)
#define _PINOF(portpin) ((portpin)&0x7)
/* Register addresses parametrised on port */
#define GPIO_CR(port) (HD64465_REG_GPACR+((port)<<1))
#define GPIO_DR(port) (HD64465_REG_GPADR+((port)<<1))
#define GPIO_ICR(port) (HD64465_REG_GPAICR+((port)<<1))
#define GPIO_ISR(port) (HD64465_REG_GPAISR+((port)<<1))
#define GPIO_NPORTS 5
#define MODNAME "hd64465_gpio"
EXPORT_SYMBOL(hd64465_gpio_configure);
EXPORT_SYMBOL(hd64465_gpio_get_pin);
EXPORT_SYMBOL(hd64465_gpio_get_port);
EXPORT_SYMBOL(hd64465_gpio_register_irq);
EXPORT_SYMBOL(hd64465_gpio_set_pin);
EXPORT_SYMBOL(hd64465_gpio_set_port);
EXPORT_SYMBOL(hd64465_gpio_unregister_irq);
/* TODO: each port should be protected with a spinlock */
void hd64465_gpio_configure(int portpin, int direction)
{
unsigned short cr;
unsigned int shift = (_PINOF(portpin)<<1);
cr = inw(GPIO_CR(_PORTOF(portpin)));
cr &= ~(3<<shift);
cr |= direction<<shift;
outw(cr, GPIO_CR(_PORTOF(portpin)));
}
void hd64465_gpio_set_pin(int portpin, unsigned int value)
{
unsigned short d;
unsigned short mask = 1<<(_PINOF(portpin));
d = inw(GPIO_DR(_PORTOF(portpin)));
if (value)
d |= mask;
else
d &= ~mask;
outw(d, GPIO_DR(_PORTOF(portpin)));
}
unsigned int hd64465_gpio_get_pin(int portpin)
{
return inw(GPIO_DR(_PORTOF(portpin))) & (1<<(_PINOF(portpin)));
}
/* TODO: for cleaner atomicity semantics, add a mask to this routine */
void hd64465_gpio_set_port(int port, unsigned int value)
{
outw(value, GPIO_DR(port));
}
unsigned int hd64465_gpio_get_port(int port)
{
return inw(GPIO_DR(port));
}
static struct {
void (*func)(int portpin, void *dev);
void *dev;
} handlers[GPIO_NPORTS * 8];
static irqreturn_t hd64465_gpio_interrupt(int irq, void *dev)
{
unsigned short port, pin, isr, mask, portpin;
for (port=0 ; port<GPIO_NPORTS ; port++) {
isr = inw(GPIO_ISR(port));
for (pin=0 ; pin<8 ; pin++) {
mask = 1<<pin;
if (isr & mask) {
portpin = (port<<3)|pin;
if (handlers[portpin].func != 0)
handlers[portpin].func(portpin, handlers[portpin].dev);
else
printk(KERN_NOTICE "unexpected GPIO interrupt, pin %c%d\n",
port+'A', (int)pin);
}
}
/* Write 1s back to ISR to clear it? That's what the manual says.. */
outw(isr, GPIO_ISR(port));
}
return IRQ_HANDLED;
}
void hd64465_gpio_register_irq(int portpin, int mode,
void (*handler)(int portpin, void *dev), void *dev)
{
unsigned long flags;
unsigned short icr, mask;
if (handler == 0)
return;
local_irq_save(flags);
handlers[portpin].func = handler;
handlers[portpin].dev = dev;
/*
* Configure Interrupt Control Register
*/
icr = inw(GPIO_ICR(_PORTOF(portpin)));
mask = (1<<_PINOF(portpin));
/* unmask interrupt */
icr &= ~mask;
/* set TS bit */
mask <<= 8;
icr &= ~mask;
if (mode == HD64465_GPIO_RISING)
icr |= mask;
outw(icr, GPIO_ICR(_PORTOF(portpin)));
local_irq_restore(flags);
}
void hd64465_gpio_unregister_irq(int portpin)
{
unsigned long flags;
unsigned short icr;
local_irq_save(flags);
/*
* Configure Interrupt Control Register
*/
icr = inw(GPIO_ICR(_PORTOF(portpin)));
icr |= (1<<_PINOF(portpin)); /* mask interrupt */
outw(icr, GPIO_ICR(_PORTOF(portpin)));
handlers[portpin].func = 0;
handlers[portpin].dev = 0;
local_irq_restore(flags);
}
static int __init hd64465_gpio_init(void)
{
if (!request_region(HD64465_REG_GPACR, 0x1000, MODNAME))
return -EBUSY;
if (request_irq(HD64465_IRQ_GPIO, hd64465_gpio_interrupt,
IRQF_DISABLED, MODNAME, 0))
goto out_irqfailed;
printk("HD64465 GPIO layer on irq %d\n", HD64465_IRQ_GPIO);
return 0;
out_irqfailed:
release_region(HD64465_REG_GPACR, 0x1000);
return -EINVAL;
}
static void __exit hd64465_gpio_exit(void)
{
release_region(HD64465_REG_GPACR, 0x1000);
free_irq(HD64465_IRQ_GPIO, 0);
}
module_init(hd64465_gpio_init);
module_exit(hd64465_gpio_exit);
MODULE_LICENSE("GPL");
arch/sh/cchips/hd6446x/hd64465/io.c deleted 100644 → 0
View file @ 63b40456
/*
* $Id: io.c,v 1.4 2003/08/03 03:05:10 lethal Exp $
* by Greg Banks <gbanks@pocketpenguins.com>
* (c) 2000 PocketPenguins Inc
*
* Derived from io_hd64461.c, which bore the message:
* Copyright (C) 2000 YAEGASHI Takeshi
*
* Typical I/O routines for HD64465 system.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <asm/io.h>
#include <asm/hd64465/hd64465.h>
#define HD64465_DEBUG 0
#if HD64465_DEBUG
#define DPRINTK(args...) printk(args)
#define DIPRINTK(n, args...) if (hd64465_io_debug>(n)) printk(args)
#else
#define DPRINTK(args...)
#define DIPRINTK(n, args...)
#endif
/* This is a hack suitable only for debugging IO port problems */
int hd64465_io_debug;
EXPORT_SYMBOL(hd64465_io_debug);
/* Low iomap maps port 0-1K to addresses in 8byte chunks */
#define HD64465_IOMAP_LO_THRESH 0x400
#define HD64465_IOMAP_LO_SHIFT 3
#define HD64465_IOMAP_LO_MASK ((1<<HD64465_IOMAP_LO_SHIFT)-1)
#define HD64465_IOMAP_LO_NMAP (HD64465_IOMAP_LO_THRESH>>HD64465_IOMAP_LO_SHIFT)
static unsigned long hd64465_iomap_lo[HD64465_IOMAP_LO_NMAP];
static unsigned char hd64465_iomap_lo_shift[HD64465_IOMAP_LO_NMAP];
/* High iomap maps port 1K-64K to addresses in 1K chunks */
#define HD64465_IOMAP_HI_THRESH 0x10000
#define HD64465_IOMAP_HI_SHIFT 10
#define HD64465_IOMAP_HI_MASK ((1<<HD64465_IOMAP_HI_SHIFT)-1)
#define HD64465_IOMAP_HI_NMAP (HD64465_IOMAP_HI_THRESH>>HD64465_IOMAP_HI_SHIFT)
static unsigned long hd64465_iomap_hi[HD64465_IOMAP_HI_NMAP];
static unsigned char hd64465_iomap_hi_shift[HD64465_IOMAP_HI_NMAP];
#define PORT2ADDR(x) (sh_mv.mv_isa_port2addr(x))
void hd64465_port_map(unsigned short baseport, unsigned int nports,
unsigned long addr, unsigned char shift)
{
unsigned int port, endport = baseport + nports;
DPRINTK("hd64465_port_map(base=0x%04hx, n=0x%04hx, addr=0x%08lx,endport=0x%04x)\n",
baseport, nports, addr,endport);
for (port = baseport ;
port < endport && port < HD64465_IOMAP_LO_THRESH ;
port += (1<<HD64465_IOMAP_LO_SHIFT)) {
DPRINTK(" maplo[0x%x] = 0x%08lx\n", port, addr);
hd64465_iomap_lo[port>>HD64465_IOMAP_LO_SHIFT] = addr;
hd64465_iomap_lo_shift[port>>HD64465_IOMAP_LO_SHIFT] = shift;
addr += (1<<(HD64465_IOMAP_LO_SHIFT));
}
for (port = max_t(unsigned int, baseport, HD64465_IOMAP_LO_THRESH);
port < endport && port < HD64465_IOMAP_HI_THRESH ;
port += (1<<HD64465_IOMAP_HI_SHIFT)) {
DPRINTK(" maphi[0x%x] = 0x%08lx\n", port, addr);
hd64465_iomap_hi[port>>HD64465_IOMAP_HI_SHIFT] = addr;
hd64465_iomap_hi_shift[port>>HD64465_IOMAP_HI_SHIFT] = shift;
addr += (1<<(HD64465_IOMAP_HI_SHIFT));
}
}
EXPORT_SYMBOL(hd64465_port_map);
void hd64465_port_unmap(unsigned short baseport, unsigned int nports)
{
unsigned int port, endport = baseport + nports;
DPRINTK("hd64465_port_unmap(base=0x%04hx, n=0x%04hx)\n",
baseport, nports);
for (port = baseport ;
port < endport && port < HD64465_IOMAP_LO_THRESH ;
port += (1<<HD64465_IOMAP_LO_SHIFT)) {
hd64465_iomap_lo[port>>HD64465_IOMAP_LO_SHIFT] = 0;
}
for (port = max_t(unsigned int, baseport, HD64465_IOMAP_LO_THRESH);
port < endport && port < HD64465_IOMAP_HI_THRESH ;
port += (1<<HD64465_IOMAP_HI_SHIFT)) {
hd64465_iomap_hi[port>>HD64465_IOMAP_HI_SHIFT] = 0;
}
}
EXPORT_SYMBOL(hd64465_port_unmap);
unsigned long hd64465_isa_port2addr(unsigned long port)
{
unsigned long addr = 0;
unsigned char shift;
/* handle remapping of low IO ports */
if (port < HD64465_IOMAP_LO_THRESH) {
addr = hd64465_iomap_lo[port >> HD64465_IOMAP_LO_SHIFT];
shift = hd64465_iomap_lo_shift[port >> HD64465_IOMAP_LO_SHIFT];
if (addr != 0)
addr += (port & HD64465_IOMAP_LO_MASK) << shift;
else
printk(KERN_NOTICE "io_hd64465: access to un-mapped port %lx\n", port);
} else if (port < HD64465_IOMAP_HI_THRESH) {
addr = hd64465_iomap_hi[port >> HD64465_IOMAP_HI_SHIFT];
shift = hd64465_iomap_hi_shift[port >> HD64465_IOMAP_HI_SHIFT];
if (addr != 0)
addr += (port & HD64465_IOMAP_HI_MASK) << shift;
else
printk(KERN_NOTICE "io_hd64465: access to un-mapped port %lx\n", port);
}
/* HD64465 internal devices (0xb0000000) */
else if (port < 0x20000)
addr = CONFIG_HD64465_IOBASE + port - 0x10000;
/* Whole physical address space (0xa0000000) */
else
addr = P2SEGADDR(port);
DIPRINTK(2, "PORT2ADDR(0x%08lx) = 0x%08lx\n", port, addr);
return addr;
}
static inline void delay(void)
{
ctrl_inw(0xa0000000);
}
unsigned char hd64465_inb(unsigned long port)
{
unsigned long addr = PORT2ADDR(port);
unsigned long b = (addr == 0 ? 0 : *(volatile unsigned char*)addr);
DIPRINTK(0, "inb(%08lx) = %02x\n", addr, (unsigned)b);
return b;
}
unsigned char hd64465_inb_p(unsigned long port)
{
unsigned long v;
unsigned long addr = PORT2ADDR(port);
v = (addr == 0 ? 0 : *(volatile unsigned char*)addr);
delay();
DIPRINTK(0, "inb_p(%08lx) = %02x\n", addr, (unsigned)v);
return v;
}
unsigned short hd64465_inw(unsigned long port)
{
unsigned long addr = PORT2ADDR(port);
unsigned long b = (addr == 0 ? 0 : *(volatile unsigned short*)addr);
DIPRINTK(0, "inw(%08lx) = %04lx\n", addr, b);
return b;
}
unsigned int hd64465_inl(unsigned long port)
{
unsigned long addr = PORT2ADDR(port);
unsigned int b = (addr == 0 ? 0 : *(volatile unsigned long*)addr);
DIPRINTK(0, "inl(%08lx) = %08x\n", addr, b);
return b;
}
void hd64465_outb(unsigned char b, unsigned long port)
{
unsigned long addr = PORT2ADDR(port);
DIPRINTK(0, "outb(%02x, %08lx)\n", (unsigned)b, addr);
if (addr != 0)
*(volatile unsigned char*)addr = b;
}
void hd64465_outb_p(unsigned char b, unsigned long port)
{
unsigned long addr = PORT2ADDR(port);
DIPRINTK(0, "outb_p(%02x, %08lx)\n", (unsigned)b, addr);
if (addr != 0)
*(volatile unsigned char*)addr = b;
delay();
}
void hd64465_outw(unsigned short b, unsigned long port)
{
unsigned long addr = PORT2ADDR(port);
DIPRINTK(0, "outw(%04x, %08lx)\n", (unsigned)b, addr);
if (addr != 0)
*(volatile unsigned short*)addr = b;
}
void hd64465_outl(unsigned int b, unsigned long port)
{
unsigned long addr = PORT2ADDR(port);
DIPRINTK(0, "outl(%08x, %08lx)\n", b, addr);
if (addr != 0)
*(volatile unsigned long*)addr = b;
}
arch/sh/cchips/hd6446x/hd64465/setup.c deleted 100644 → 0
View file @ 63b40456
/*
* $Id: setup.c,v 1.4 2003/08/03 03:05:10 lethal Exp $
*
* Setup and IRQ handling code for the HD64465 companion chip.
* by Greg Banks <gbanks@pocketpenguins.com>
* Copyright (c) 2000 PocketPenguins Inc
*
* Derived from setup_hd64461.c which bore the message:
* Copyright (C) 2000 YAEGASHI Takeshi
*/
#include <linux/sched.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/param.h>
#include <linux/ioport.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/irq.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/hd64465/hd64465.h>
static void disable_hd64465_irq(unsigned int irq)
{
unsigned short nimr;
unsigned short mask = 1 << (irq - HD64465_IRQ_BASE);
pr_debug("disable_hd64465_irq(%d): mask=%x\n", irq, mask);
nimr = inw(HD64465_REG_NIMR);
nimr |= mask;
outw(nimr, HD64465_REG_NIMR);
}
static void enable_hd64465_irq(unsigned int irq)
{
unsigned short nimr;
unsigned short mask = 1 << (irq - HD64465_IRQ_BASE);
pr_debug("enable_hd64465_irq(%d): mask=%x\n", irq, mask);
nimr = inw(HD64465_REG_NIMR);
nimr &= ~mask;
outw(nimr, HD64465_REG_NIMR);
}
static void mask_and_ack_hd64465(unsigned int irq)
{
disable_hd64465_irq(irq);
}
static void end_hd64465_irq(unsigned int irq)
{
if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
enable_hd64465_irq(irq);
}
static unsigned int startup_hd64465_irq(unsigned int irq)
{
enable_hd64465_irq(irq);
return 0;
}
static void shutdown_hd64465_irq(unsigned int irq)
{
disable_hd64465_irq(irq);
}
static struct hw_interrupt_type hd64465_irq_type = {
.typename = "HD64465-IRQ",
.startup = startup_hd64465_irq,
.shutdown = shutdown_hd64465_irq,
.enable = enable_hd64465_irq,
.disable = disable_hd64465_irq,
.ack = mask_and_ack_hd64465,
.end = end_hd64465_irq,
};
static irqreturn_t hd64465_interrupt(int irq, void *dev_id)
{
printk(KERN_INFO
"HD64465: spurious interrupt, nirr: 0x%x nimr: 0x%x\n",
inw(HD64465_REG_NIRR), inw(HD64465_REG_NIMR));
return IRQ_NONE;
}
/*
* Support for a secondary IRQ demux step. This is necessary
* because the HD64465 presents a very thin interface to the
* PCMCIA bus; a lot of features (such as remapping interrupts)
* normally done in hardware by other PCMCIA host bridges is
* instead done in software.
*/
static struct {
int (*func)(int, void *);
void *dev;
} hd64465_demux[HD64465_IRQ_NUM];
void hd64465_register_irq_demux(int irq,
int (*demux)(int irq, void *dev), void *dev)
{
hd64465_demux[irq - HD64465_IRQ_BASE].func = demux;
hd64465_demux[irq - HD64465_IRQ_BASE].dev = dev;
}
EXPORT_SYMBOL(hd64465_register_irq_demux);
void hd64465_unregister_irq_demux(int irq)
{
hd64465_demux[irq - HD64465_IRQ_BASE].func = 0;
}
EXPORT_SYMBOL(hd64465_unregister_irq_demux);
int hd64465_irq_demux(int irq)
{
if (irq == CONFIG_HD64465_IRQ) {
unsigned short i, bit;
unsigned short nirr = inw(HD64465_REG_NIRR);
unsigned short nimr = inw(HD64465_REG_NIMR);
pr_debug("hd64465_irq_demux, nirr=%04x, nimr=%04x\n", nirr, nimr);
nirr &= ~nimr;
for (bit = 1, i = 0 ; i < HD64465_IRQ_NUM ; bit <<= 1, i++)
if (nirr & bit)
break;
if (i < HD64465_IRQ_NUM) {
irq = HD64465_IRQ_BASE + i;
if (hd64465_demux[i].func != 0)
irq = hd64465_demux[i].func(irq, hd64465_demux[i].dev);
}
}
return irq;
}
static struct irqaction irq0 = {
.handler = hd64465_interrupt,
.flags = IRQF_DISABLED,
.mask = CPU_MASK_NONE,
.name = "HD64465",
};
static int __init setup_hd64465(void)
{
int i;
unsigned short rev;
unsigned short smscr;
if (!MACH_HD64465)
return 0;
printk(KERN_INFO "HD64465 configured at 0x%x on irq %d(mapped into %d to %d)\n",
CONFIG_HD64465_IOBASE,
CONFIG_HD64465_IRQ,
HD64465_IRQ_BASE,
HD64465_IRQ_BASE+HD64465_IRQ_NUM-1);
if (inw(HD64465_REG_SDID) != HD64465_SDID) {
printk(KERN_ERR "HD64465 device ID not found, check base address\n");
}
rev = inw(HD64465_REG_SRR);
printk(KERN_INFO "HD64465 hardware revision %d.%d\n", (rev >> 8) & 0xff, rev & 0xff);
outw(0xffff, HD64465_REG_NIMR); /* mask all interrupts */
for (i = 0; i < HD64465_IRQ_NUM ; i++) {
irq_desc[HD64465_IRQ_BASE + i].chip = &hd64465_irq_type;
}
setup_irq(CONFIG_HD64465_IRQ, &irq0);
/* wake up the UART from STANDBY at this point */
smscr = inw(HD64465_REG_SMSCR);
outw(smscr & (~HD64465_SMSCR_UARTST), HD64465_REG_SMSCR);
/* remap IO ports for first ISA serial port to HD64465 UART */
hd64465_port_map(0x3f8, 8, CONFIG_HD64465_IOBASE + 0x8000, 1);
return 0;
}
module_init(setup_hd64465);
arch/sh/configs/migor_defconfig
View file @ 1fe01cb5
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.27
# Tue Oct 21 12:57:28 2008
# Linux kernel version: 2.6.28-rc2
# Fri Oct 31 15:58:06 2008
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
......@@ -73,7 +73,6 @@ CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
......@@ -285,7 +284,7 @@ CONFIG_GUSA=y
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=serial ip=on"
CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=serial ip=on root=/dev/nfs ip=dhcp"
#
# Bus options
......@@ -718,6 +717,7 @@ CONFIG_SSB_POSSIBLE=y
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
......@@ -969,7 +969,23 @@ CONFIG_TMPFS=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
......@@ -1019,7 +1035,12 @@ CONFIG_CRYPTO=y
# Crypto core or helper
#
# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
......@@ -1096,7 +1117,7 @@ CONFIG_CRYPTO=y
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_HW is not set
#
# Library routines
......
arch/sh/configs/ul2_defconfig 0 → 100644
View file @ 1fe01cb5
This diff is collapsed.
arch/sh/include/asm/byteorder.h
View file @ 1fe01cb5
......@@ -8,7 +8,15 @@
#include <linux/compiler.h>
#include <linux/types.h>
static inline __attribute_const__ __u32 ___arch__swab32(__u32 x)
#ifdef __LITTLE_ENDIAN__
# define __LITTLE_ENDIAN
#else
# define __BIG_ENDIAN
#endif
#define __SWAB_64_THRU_32__
static inline __attribute_const__ __u32 __arch_swab32(__u32 x)
{
__asm__(
#ifdef __SH5__
......@@ -24,8 +32,9 @@ static inline __attribute_const__ __u32 ___arch__swab32(__u32 x)
return x;
}
#define __arch_swab32 __arch_swab32
static inline __attribute_const__ __u16 ___arch__swab16(__u16 x)
static inline __attribute_const__ __u16 __arch_swab16(__u16 x)
{
__asm__(
#ifdef __SH5__
......@@ -39,32 +48,21 @@ static inline __attribute_const__ __u16 ___arch__swab16(__u16 x)
return x;
}
#define __arch_swab16 __arch_swab16
static inline __u64 ___arch__swab64(__u64 val)
static inline __u64 __arch_swab64(__u64 val)
{
union {
struct { __u32 a,b; } s;
__u64 u;
} v, w;
v.u = val;
w.s.b = ___arch__swab32(v.s.a);
w.s.a = ___arch__swab32(v.s.b);
w.s.b = __arch_swab32(v.s.a);
w.s.a = __arch_swab32(v.s.b);
return w.u;
}
#define __arch_swab64 __arch_swab64
#define __arch__swab64(x) ___arch__swab64(x)
#define __arch__swab32(x) ___arch__swab32(x)
#define __arch__swab16(x) ___arch__swab16(x)
#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
# define __BYTEORDER_HAS_U64__
# define __SWAB_64_THRU_32__
#endif
#ifdef __LITTLE_ENDIAN__
#include <linux/byteorder/little_endian.h>
#else
#include <linux/byteorder/big_endian.h>
#endif
#include <linux/byteorder.h>
#endif /* __ASM_SH_BYTEORDER_H */
arch/sh/include/asm/hd64465/gpio.h deleted 100644 → 0
View file @ 63b40456
#ifndef _ASM_SH_HD64465_GPIO_
#define _ASM_SH_HD64465_GPIO_ 1
/*
* $Id: gpio.h,v 1.3 2003/05/04 19:30:14 lethal Exp $
*
* Hitachi HD64465 companion chip: General Purpose IO pins support.
* This layer enables other device drivers to configure GPIO
* pins, get and set their values, and register an interrupt
* routine for when input pins change in hardware.
*
* by Greg Banks <gbanks@pocketpenguins.com>
* (c) 2000 PocketPenguins Inc.
*/
#include <asm/hd64465.h>
/* Macro to construct a portpin number (used in all
* subsequent functions) from a port letter and a pin
* number, e.g. HD64465_GPIO_PORTPIN('A', 5).
*/
#define HD64465_GPIO_PORTPIN(port,pin) (((port)-'A')<<3|(pin))
/* Pin configuration constants for _configure() */
#define HD64465_GPIO_FUNCTION2 0 /* use the pin's *other* function */
#define HD64465_GPIO_OUT 1 /* output */
#define HD64465_GPIO_IN_PULLUP 2 /* input, pull-up MOS on */
#define HD64465_GPIO_IN 3 /* input */
/* Configure a pin's direction */
extern void hd64465_gpio_configure(int portpin, int direction);
/* Get, set value */
extern void hd64465_gpio_set_pin(int portpin, unsigned int value);
extern unsigned int hd64465_gpio_get_pin(int portpin);
extern void hd64465_gpio_set_port(int port, unsigned int value);
extern unsigned int hd64465_gpio_get_port(int port);
/* mode constants for _register_irq() */
#define HD64465_GPIO_FALLING 0
#define HD64465_GPIO_RISING 1
/* Interrupt on external value change */
extern void hd64465_gpio_register_irq(int portpin, int mode,
void (*handler)(int portpin, void *dev), void *dev);
extern void hd64465_gpio_unregister_irq(int portpin);
#endif /* _ASM_SH_HD64465_GPIO_ */
arch/sh/include/asm/hd64465/hd64465.h deleted 100644 → 0
View file @ 63b40456
This diff is collapsed.
arch/sh/include/asm/hd64465/io.h deleted 100644 → 0
View file @ 63b40456
/*
* include/asm-sh/hd64465/io.h
*
* By Greg Banks <gbanks@pocketpenguins.com>
* (c) 2000 PocketPenguins Inc.
*
* Derived from io_hd64461.h, which bore the message:
* Copyright 2000 Stuart Menefy (stuart.menefy@st.com)
*
* May be copied or modified under the terms of the GNU General Public
* License. See linux/COPYING for more information.
*
* IO functions for an HD64465 "Windows CE Intelligent Peripheral Controller".
*/
#ifndef _ASM_SH_IO_HD64465_H
#define _ASM_SH_IO_HD64465_H
extern unsigned char hd64465_inb(unsigned long port);
extern unsigned short hd64465_inw(unsigned long port);
extern unsigned int hd64465_inl(unsigned long port);
extern void hd64465_outb(unsigned char value, unsigned long port);
extern void hd64465_outw(unsigned short value, unsigned long port);
extern void hd64465_outl(unsigned int value, unsigned long port);
extern unsigned char hd64465_inb_p(unsigned long port);
extern void hd64465_outb_p(unsigned char value, unsigned long port);
extern unsigned long hd64465_isa_port2addr(unsigned long offset);
extern int hd64465_irq_demux(int irq);
/* Provision for generic secondary demux step -- used by PCMCIA code */
extern void hd64465_register_irq_demux(int irq,
int (*demux)(int irq, void *dev), void *dev);
extern void hd64465_unregister_irq_demux(int irq);
/* Set this variable to 1 to see port traffic */
extern int hd64465_io_debug;
/* Map a range of ports to a range of kernel virtual memory.
*/
extern void hd64465_port_map(unsigned short baseport, unsigned int nports,
unsigned long addr, unsigned char shift);
extern void hd64465_port_unmap(unsigned short baseport, unsigned int nports);
#endif /* _ASM_SH_IO_HD64465_H */
arch/sh/include/asm/serial.h
View file @ 1fe01cb5
......@@ -7,8 +7,6 @@
#ifndef _ASM_SERIAL_H
#define _ASM_SERIAL_H
#include <linux/kernel.h>
/*
* This assumes you have a 1.8432 MHz clock for your UART.
*
......@@ -18,19 +16,4 @@
*/
#define BASE_BAUD ( 1843200 / 16 )
#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
#ifdef CONFIG_HD64465
#include <asm/hd64465/hd64465.h>
#define SERIAL_PORT_DFNS \
/* UART CLK PORT IRQ FLAGS */ \
{ 0, BASE_BAUD, 0x3F8, HD64465_IRQ_UART, STD_COM_FLAGS } /* ttyS0 */
#else
#define SERIAL_PORT_DFNS
#endif
#endif /* _ASM_SERIAL_H */
arch/sh/include/cpu-sh4/cpu/rtc.h
View file @ 1fe01cb5
#ifndef __ASM_SH_CPU_SH4_RTC_H
#define __ASM_SH_CPU_SH4_RTC_H
#ifdef CONFIG_CPU_SUBTYPE_SH7723
#if defined(CONFIG_CPU_SUBTYPE_SH7722) || defined(CONFIG_CPU_SUBTYPE_SH7723)
#define rtc_reg_size sizeof(u16)
#else
#define rtc_reg_size sizeof(u32)
......
arch/sh/kernel/cpu/sh4a/setup-sh7366.c
View file @ 1fe01cb5
......@@ -36,6 +36,32 @@ static struct platform_device iic_device = {
.resource = iic_resources,
};
static struct resource usb_host_resources[] = {
[0] = {
.name = "r8a66597_hcd",
.start = 0xa4d80000,
.end = 0xa4d800ff,
.flags = IORESOURCE_MEM,
},
[1] = {
.name = "r8a66597_hcd",
.start = 65,
.end = 65,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device usb_host_device = {
.name = "r8a66597_hcd",
.id = -1,
.dev = {
.dma_mask = NULL,
.coherent_dma_mask = 0xffffffff,
},
.num_resources = ARRAY_SIZE(usb_host_resources),
.resource = usb_host_resources,
};
static struct uio_info vpu_platform_data = {
.name = "VPU5",
.version = "0",
......@@ -142,6 +168,7 @@ static struct platform_device sci_device = {
static struct platform_device *sh7366_devices[] __initdata = {
&iic_device,
&sci_device,
&usb_host_device,
&vpu_device,
&veu0_device,
&veu1_device,
......@@ -158,6 +185,7 @@ static int __init sh7366_devices_setup(void)
clk_always_enable("mstp022"); /* INTC */
clk_always_enable("mstp020"); /* SuperHyway */
clk_always_enable("mstp109"); /* I2C */
clk_always_enable("mstp211"); /* USB */
clk_always_enable("mstp207"); /* VEU-2 */
clk_always_enable("mstp202"); /* VEU-1 */
clk_always_enable("mstp201"); /* VPU */
......
arch/sh/kernel/cpu/sh4a/setup-sh7722.c
View file @ 1fe01cb5
/*
* SH7722 Setup
*
* Copyright (C) 2006 - 2007 Paul Mundt
* Copyright (C) 2006 - 2008 Paul Mundt
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
......@@ -16,6 +16,36 @@
#include <asm/clock.h>
#include <asm/mmzone.h>
static struct resource rtc_resources[] = {
[0] = {
.start = 0xa465fec0,
.end = 0xa465fec0 + 0x58 - 1,
.flags = IORESOURCE_IO,
},
[1] = {
/* Period IRQ */
.start = 45,
.flags = IORESOURCE_IRQ,
},
[2] = {
/* Carry IRQ */
.start = 46,
.flags = IORESOURCE_IRQ,
},
[3] = {
/* Alarm IRQ */
.start = 44,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device rtc_device = {
.name = "sh-rtc",
.id = -1,
.num_resources = ARRAY_SIZE(rtc_resources),
.resource = rtc_resources,
};
static struct resource usbf_resources[] = {
[0] = {
.name = "m66592_udc",
......@@ -150,6 +180,7 @@ static struct platform_device sci_device = {
};
static struct platform_device *sh7722_devices[] __initdata = {
&rtc_device,
&usbf_device,
&iic_device,
&sci_device,
......@@ -202,7 +233,6 @@ enum {
IRDA, JPU, LCDC,
/* interrupt groups */
SIM, RTC, DMAC0123, VIOVOU, USB, DMAC45, FLCTL, I2C, SDHI,
};
......
arch/sh/kernel/entry-common.S
View file @ 1fe01cb5
......@@ -372,7 +372,7 @@ syscall_exit:
7: .long do_syscall_trace_enter
8: .long do_syscall_trace_leave
#ifdef CONFIG_FTRACE
#ifdef CONFIG_FUNCTION_TRACER
.align 2
.globl _mcount
.type _mcount,@function
......@@ -414,4 +414,4 @@ skip_trace:
ftrace_stub:
rts
nop
#endif /* CONFIG_FTRACE */
#endif /* CONFIG_FUNCTION_TRACER */
arch/sh/kernel/sh_ksyms_32.c
View file @ 1fe01cb5
......@@ -50,7 +50,10 @@ EXPORT_SYMBOL(__udelay);
EXPORT_SYMBOL(__ndelay);
EXPORT_SYMBOL(__const_udelay);
#define DECLARE_EXPORT(name) extern void name(void);EXPORT_SYMBOL(name)
#define DECLARE_EXPORT(name) \
extern void name(void);EXPORT_SYMBOL(name)
#define MAYBE_DECLARE_EXPORT(name) \
extern void name(void) __weak;EXPORT_SYMBOL(name)
/* These symbols are generated by the compiler itself */
DECLARE_EXPORT(__udivsi3);
......@@ -109,10 +112,8 @@ DECLARE_EXPORT(__movmemSI12_i4);
* compiler which include backported patches.
*/
DECLARE_EXPORT(__udiv_qrnnd_16);
#if !defined(CONFIG_CPU_SH2)
DECLARE_EXPORT(__sdivsi3_i4i);
DECLARE_EXPORT(__udivsi3_i4i);
#endif
MAYBE_DECLARE_EXPORT(__sdivsi3_i4i);
MAYBE_DECLARE_EXPORT(__udivsi3_i4i);
#endif
#else /* GCC 3.x */
DECLARE_EXPORT(__movstr_i4_even);
......@@ -133,7 +134,7 @@ EXPORT_SYMBOL(flush_dcache_page);
EXPORT_SYMBOL(clear_user_page);
#endif
#ifdef CONFIG_FTRACE
#ifdef CONFIG_FUNCTION_TRACER
EXPORT_SYMBOL(mcount);
#endif
EXPORT_SYMBOL(csum_partial);
......
arch/sh/mm/cache-sh2a.c
View file @ 1fe01cb5
......@@ -59,7 +59,7 @@ void __flush_purge_region(void *start, int size)
for (v = begin; v < end; v+=L1_CACHE_BYTES) {
ctrl_outl((v & CACHE_PHYSADDR_MASK),
CACHE_OC_ADDRESS_ARRAY | (v & 0x000003f0) | 0x00000008);
CACHE_OC_ADDRESS_ARRAY | (v & 0x000007f0) | 0x00000008);
}
back_to_cached();
local_irq_restore(flags);
......@@ -82,14 +82,14 @@ void __flush_invalidate_region(void *start, int size)
/* I-cache invalidate */
for (v = begin; v < end; v+=L1_CACHE_BYTES) {
ctrl_outl((v & CACHE_PHYSADDR_MASK),
CACHE_IC_ADDRESS_ARRAY | (v & 0x000003f0) | 0x00000008);
CACHE_IC_ADDRESS_ARRAY | (v & 0x000007f0) | 0x00000008);
}
#else
for (v = begin; v < end; v+=L1_CACHE_BYTES) {
ctrl_outl((v & CACHE_PHYSADDR_MASK),
CACHE_IC_ADDRESS_ARRAY | (v & 0x000003f0) | 0x00000008);
CACHE_IC_ADDRESS_ARRAY | (v & 0x000007f0) | 0x00000008);
ctrl_outl((v & CACHE_PHYSADDR_MASK),
CACHE_OC_ADDRESS_ARRAY | (v & 0x000003f0) | 0x00000008);
CACHE_OC_ADDRESS_ARRAY | (v & 0x000007f0) | 0x00000008);
}
#endif
back_to_cached();
......
arch/sh/oprofile/op_model_sh7750.c
View file @ 1fe01cb5
......@@ -255,10 +255,9 @@ int __init oprofile_arch_init(struct oprofile_operations *ops)
return -ENODEV;
ops = &sh7750_perf_counter_ops;
ops->cpu_type = (char *)get_cpu_subtype(&current_cpu_data);
ops->cpu_type = "sh/sh7750";
printk(KERN_INFO "oprofile: using SH-4 (%s) performance monitoring.\n",
sh7750_perf_counter_ops.cpu_type);
printk(KERN_INFO "oprofile: using SH-4 performance monitoring.\n");
/* Clear the counters */
ctrl_outw(ctrl_inw(PMCR1) | PMCR_PMCLR, PMCR1);
......@@ -270,4 +269,3 @@ int __init oprofile_arch_init(struct oprofile_operations *ops)
void oprofile_arch_exit(void)
{
}
arch/sh/tools/mach-types
View file @ 1fe01cb5
......@@ -13,7 +13,6 @@ RTS7751R2D SH_RTS7751R2D
# List of companion chips / MFDs.
#
HD64461 HD64461
HD64465 HD64465
#
# List of boards.
......
drivers/cdrom/gdrom.c
View file @ 1fe01cb5
......@@ -495,9 +495,10 @@ static int gdrom_bdops_open(struct block_device *bdev, fmode_t mode)
return cdrom_open(gd.cd_info, bdev, mode);
}
static int gdrom_bdops_release(struct block_device *bdev, fmode_t mode)
static int gdrom_bdops_release(struct gendisk *disk, fmode_t mode)
{
return cdrom_release(gd.cd_info, mode);
cdrom_release(gd.cd_info, mode);
return 0;
}
static int gdrom_bdops_mediachanged(struct gendisk *disk)
......
drivers/pcmcia/Kconfig
View file @ 1fe01cb5
......@@ -188,10 +188,6 @@ config PCMCIA_M8XX
This driver is also available as a module called m8xx_pcmcia.
config HD64465_PCMCIA
tristate "HD64465 host bridge support"
depends on HD64465 && PCMCIA
config PCMCIA_AU1X00
tristate "Au1x00 pcmcia support"
depends on SOC_AU1X00 && PCMCIA
......
drivers/pcmcia/Makefile
View file @ 1fe01cb5
......@@ -22,7 +22,6 @@ obj-$(CONFIG_I82365) += i82365.o
obj-$(CONFIG_I82092) += i82092.o
obj-$(CONFIG_TCIC) += tcic.o
obj-$(CONFIG_PCMCIA_M8XX) += m8xx_pcmcia.o
obj-$(CONFIG_HD64465_PCMCIA) += hd64465_ss.o
obj-$(CONFIG_PCMCIA_SA1100) += sa11xx_core.o sa1100_cs.o
obj-$(CONFIG_PCMCIA_SA1111) += sa11xx_core.o sa1111_cs.o
obj-$(CONFIG_M32R_PCC) += m32r_pcc.o
......
drivers/pcmcia/hd64465_ss.c deleted 100644 → 0
View file @ 63b40456
This diff is collapsed.
drivers/serial/sh-sci.c
View file @ 1fe01cb5
......@@ -250,8 +250,7 @@ static inline void h8300_sci_disable(struct uart_port *port)
}
#endif
#if defined(SCI_ONLY) || defined(SCI_AND_SCIF) && \
defined(__H8300H__) || defined(__H8300S__)
#if defined(__H8300H__) || defined(__H8300S__)
static void sci_init_pins_sci(struct uart_port* port, unsigned int cflag)
{
int ch = (port->mapbase - SMR0) >> 3;
......@@ -285,11 +284,6 @@ static void sci_init_pins_irda(struct uart_port *port, unsigned int cflag)
#define sci_init_pins_irda NULL
#endif
#ifdef SCI_ONLY
#define sci_init_pins_scif NULL
#endif
#if defined(SCIF_ONLY) || defined(SCI_AND_SCIF)
#if defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712)
static void sci_init_pins_scif(struct uart_port* port, unsigned int cflag)
{
......@@ -449,7 +443,6 @@ static inline int scif_rxroom(struct uart_port *port)
return sci_in(port, SCFDR) & SCIF_RFDC_MASK;
}
#endif
#endif /* SCIF_ONLY || SCI_AND_SCIF */
static inline int sci_txroom(struct uart_port *port)
{
......@@ -485,11 +478,9 @@ static void sci_transmit_chars(struct uart_port *port)
return;
}
#ifndef SCI_ONLY
if (port->type == PORT_SCIF)
count = scif_txroom(port);
else
#endif
count = sci_txroom(port);
do {
......@@ -519,12 +510,10 @@ static void sci_transmit_chars(struct uart_port *port)
} else {
ctrl = sci_in(port, SCSCR);
#if !defined(SCI_ONLY)
if (port->type == PORT_SCIF) {
sci_in(port, SCxSR); /* Dummy read */
sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port));
}
#endif
ctrl |= SCI_CTRL_FLAGS_TIE;
sci_out(port, SCSCR, ctrl);
......@@ -547,11 +536,9 @@ static inline void sci_receive_chars(struct uart_port *port)
return;
while (1) {
#if !defined(SCI_ONLY)
if (port->type == PORT_SCIF)
count = scif_rxroom(port);
else
#endif
count = sci_rxroom(port);
/* Don't copy more bytes than there is room for in the buffer */
......@@ -812,24 +799,25 @@ static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr)
{
unsigned short ssr_status, scr_status;
struct uart_port *port = ptr;
irqreturn_t ret = IRQ_NONE;
ssr_status = sci_in(port,SCxSR);
scr_status = sci_in(port,SCSCR);
/* Tx Interrupt */
if ((ssr_status & 0x0020) && (scr_status & 0x0080))
sci_tx_interrupt(irq, ptr);
if ((ssr_status & 0x0020) && (scr_status & SCI_CTRL_FLAGS_TIE))
ret = sci_tx_interrupt(irq, ptr);
/* Rx Interrupt */
if ((ssr_status & 0x0002) && (scr_status & 0x0040))
sci_rx_interrupt(irq, ptr);
if ((ssr_status & 0x0002) && (scr_status & SCI_CTRL_FLAGS_RIE))
ret = sci_rx_interrupt(irq, ptr);
/* Error Interrupt */
if ((ssr_status & 0x0080) && (scr_status & 0x0400))
sci_er_interrupt(irq, ptr);
if ((ssr_status & 0x0080) && (scr_status & SCI_CTRL_FLAGS_REIE))
ret = sci_er_interrupt(irq, ptr);
/* Break Interrupt */
if ((ssr_status & 0x0010) && (scr_status & 0x0200))
sci_br_interrupt(irq, ptr);
if ((ssr_status & 0x0010) && (scr_status & SCI_CTRL_FLAGS_REIE))
ret = sci_br_interrupt(irq, ptr);
return IRQ_HANDLED;
return ret;
}
#if defined(CONFIG_CPU_FREQ) && defined(CONFIG_HAVE_CLK)
......@@ -1054,10 +1042,8 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
sci_out(port, SCSCR, 0x00); /* TE=0, RE=0, CKE1=0 */
#if !defined(SCI_ONLY)
if (port->type == PORT_SCIF)
sci_out(port, SCFCR, SCFCR_RFRST | SCFCR_TFRST);
#endif
smr_val = sci_in(port, SCSMR) & 3;
if ((termios->c_cflag & CSIZE) == CS7)
......
drivers/serial/sh-sci.h
View file @ 1fe01cb5
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7