platform/x86: intel_turbo_max_3: Move to intel sub-directory

Move Intel Turbo Max 3 driver to intel sub-directory to improve readability
and rename it from intel_turbo_max_3.c to turbo_max_3.c.
Signed-off-by: Kate Hsuan <hpa@redhat.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210820110458.73018-12-andriy.shevchenko@linux.intel.comSigned-off-by: Hans de Goede <hdegoede@redhat.com>

drivers/platform/x86/Kconfig

@@ -1112,16 +1112,6 @@ config INTEL_IPS
 
 source "drivers/platform/x86/intel_speed_select_if/Kconfig"
 
-config INTEL_TURBO_MAX_3
-	bool "Intel Turbo Boost Max Technology 3.0 enumeration driver"
-	depends on X86_64 && SCHED_MC_PRIO
-	help
-	  This driver reads maximum performance ratio of each CPU and set up
-	  the scheduler priority metrics. In this way scheduler can prefer
-	  CPU with higher performance to schedule tasks.
-	  This driver is only required when the system is not using Hardware
-	  P-States (HWP). In HWP mode, priority can be read from ACPI tables.
-
 config INTEL_UNCORE_FREQ_CONTROL
 	tristate "Intel Uncore frequency control driver"
 	depends on X86_64

drivers/platform/x86/Makefile

@@ -121,7 +121,6 @@ obj-$(CONFIG_WIRELESS_HOTKEY)		+= wireless-hotkey.o
 # Intel uncore drivers
 obj-$(CONFIG_INTEL_IPS)				+= intel_ips.o
 obj-$(CONFIG_INTEL_SPEED_SELECT_INTERFACE)	+= intel_speed_select_if/
-obj-$(CONFIG_INTEL_TURBO_MAX_3)			+= intel_turbo_max_3.o
 obj-$(CONFIG_INTEL_UNCORE_FREQ_CONTROL)		+= intel-uncore-frequency.o
 
 # Intel PMIC / PMC / P-Unit devices

drivers/platform/x86/intel/Kconfig

@@ -87,4 +87,15 @@ config INTEL_SMARTCONNECT
 	  This driver checks to determine whether the device has Intel Smart
 	  Connect enabled, and if so disables it.
 
+config INTEL_TURBO_MAX_3
+	bool "Intel Turbo Boost Max Technology 3.0 enumeration driver"
+	depends on X86_64 && SCHED_MC_PRIO
+	help
+	  This driver reads maximum performance ratio of each CPU and set up
+	  the scheduler priority metrics. In this way scheduler can prefer
+	  CPU with higher performance to schedule tasks.
+
+	  This driver is only required when the system is not using Hardware
+	  P-States (HWP). In HWP mode, priority can be read from ACPI tables.
+
 endif # X86_PLATFORM_DRIVERS_INTEL

drivers/platform/x86/intel/Makefile

@@ -26,3 +26,5 @@ intel-rst-y				:= rst.o
 obj-$(CONFIG_INTEL_RST)			+= intel-rst.o
 intel-smartconnect-y			:= smartconnect.o
 obj-$(CONFIG_INTEL_SMARTCONNECT)	+= intel-smartconnect.o
+intel_turbo_max_3-y			:= turbo_max_3.o
+obj-$(CONFIG_INTEL_TURBO_MAX_3)		+= intel_turbo_max_3.o