Skip to content

L
linux
Commit 1fef8917 authored by Sascha Hauer's avatar Sascha Hauer
Browse files
Options

Merge branch 'sgu/mxs-core-v8' of git://git.pengutronix.de/git/ukl/linux-2.6... 

Merge branch 'sgu/mxs-core-v8' of git://git.pengutronix.de/git/ukl/linux-2.6 into imx-for-2.6.38-new
parents d3d4b60b 1d3f33d5
Expand all Show whitespace changes
Inline Side-by-side
Showing with 9967 additions and 3481 deletions
Documentation/ABI/testing/sysfs-bus-rbd 0 → 100644
View file @ 1fef8917
What: /sys/bus/rbd/
Date: November 2010
Contact: Yehuda Sadeh <yehuda@hq.newdream.net>,
Sage Weil <sage@newdream.net>
Description:
Being used for adding and removing rbd block devices.
Usage: <mon ip addr> <options> <pool name> <rbd image name> [snap name]
$ echo "192.168.0.1 name=admin rbd foo" > /sys/bus/rbd/add
The snapshot name can be "-" or omitted to map the image read/write. A <dev-id>
will be assigned for any registered block device. If snapshot is used, it will
be mapped read-only.
Removal of a device:
$ echo <dev-id> > /sys/bus/rbd/remove
Entries under /sys/bus/rbd/devices/<dev-id>/
--------------------------------------------
client_id
The ceph unique client id that was assigned for this specific session.
major
The block device major number.
name
The name of the rbd image.
pool
The pool where this rbd image resides. The pool-name pair is unique
per rados system.
size
The size (in bytes) of the mapped block device.
refresh
Writing to this file will reread the image header data and set
all relevant datastructures accordingly.
current_snap
The current snapshot for which the device is mapped.
create_snap
Create a snapshot:
$ echo <snap-name> > /sys/bus/rbd/devices/<dev-id>/snap_create
rollback_snap
Rolls back data to the specified snapshot. This goes over the entire
list of rados blocks and sends a rollback command to each.
$ echo <snap-name> > /sys/bus/rbd/devices/<dev-id>/snap_rollback
snap_*
A directory per each snapshot
Entries under /sys/bus/rbd/devices/<dev-id>/snap_<snap-name>
-------------------------------------------------------------
id
The rados internal snapshot id assigned for this snapshot
size
The size of the image when this snapshot was taken.
Documentation/ABI/testing/sysfs-platform-asus-laptop
View file @ 1fef8917
......@@ -47,6 +47,20 @@ Date: January 2007
KernelVersion: 2.6.20
Contact: "Corentin Chary" <corentincj@iksaif.net>
Description:
Control the bluetooth device. 1 means on, 0 means off.
Control the wlan device. 1 means on, 0 means off.
This may control the led, the device or both.
Users: Lapsus
What: /sys/devices/platform/asus_laptop/wimax
Date: October 2010
KernelVersion: 2.6.37
Contact: "Corentin Chary" <corentincj@iksaif.net>
Description:
Control the wimax device. 1 means on, 0 means off.
What: /sys/devices/platform/asus_laptop/wwan
Date: October 2010
KernelVersion: 2.6.37
Contact: "Corentin Chary" <corentincj@iksaif.net>
Description:
Control the wwan (3G) device. 1 means on, 0 means off.
Documentation/ABI/testing/sysfs-platform-eeepc-wmi 0 → 100644
View file @ 1fef8917
What: /sys/devices/platform/eeepc-wmi/cpufv
Date: Oct 2010
KernelVersion: 2.6.37
Contact: "Corentin Chary" <corentincj@iksaif.net>
Description:
Change CPU clock configuration (write-only).
There are three available clock configuration:
* 0 -> Super Performance Mode
* 1 -> High Performance Mode
* 2 -> Power Saving Mode
Documentation/driver-model/interface.txt deleted 100644 → 0
View file @ d3d4b60b
Device Interfaces
Introduction
~~~~~~~~~~~~
Device interfaces are the logical interfaces of device classes that correlate
directly to userspace interfaces, like device nodes.
Each device class may have multiple interfaces through which you can
access the same device. An input device may support the mouse interface,
the 'evdev' interface, and the touchscreen interface. A SCSI disk would
support the disk interface, the SCSI generic interface, and possibly a raw
device interface.
Device interfaces are registered with the class they belong to. As devices
are added to the class, they are added to each interface registered with
the class. The interface is responsible for determining whether the device
supports the interface or not.
Programming Interface
~~~~~~~~~~~~~~~~~~~~~
struct device_interface {
char * name;
rwlock_t lock;
u32 devnum;
struct device_class * devclass;
struct list_head node;
struct driver_dir_entry dir;
int (*add_device)(struct device *);
int (*add_device)(struct intf_data *);
};
int interface_register(struct device_interface *);
void interface_unregister(struct device_interface *);
An interface must specify the device class it belongs to. It is added
to that class's list of interfaces on registration.
Interfaces can be added to a device class at any time. Whenever it is
added, each device in the class is passed to the interface's
add_device callback. When an interface is removed, each device is
removed from the interface.
Devices
~~~~~~~
Once a device is added to a device class, it is added to each
interface that is registered with the device class. The class
is expected to place a class-specific data structure in
struct device::class_data. The interface can use that (along with
other fields of struct device) to determine whether or not the driver
and/or device support that particular interface.
Data
~~~~
struct intf_data {
struct list_head node;
struct device_interface * intf;
struct device * dev;
u32 intf_num;
};
int interface_add_data(struct interface_data *);
The interface is responsible for allocating and initializing a struct
intf_data and calling interface_add_data() to add it to the device's list
of interfaces it belongs to. This list will be iterated over when the device
is removed from the class (instead of all possible interfaces for a class).
This structure should probably be embedded in whatever per-device data
structure the interface is allocating anyway.
Devices are enumerated within the interface. This happens in interface_add_data()
and the enumerated value is stored in the struct intf_data for that device.
sysfs
~~~~~
Each interface is given a directory in the directory of the device
class it belongs to:
Interfaces get a directory in the class's directory as well:
class/
`-- input
|-- devices
|-- drivers
|-- mouse
`-- evdev
When a device is added to the interface, a symlink is created that points
to the device's directory in the physical hierarchy:
class/
`-- input
|-- devices
| `-- 1 -> ../../../root/pci0/00:1f.0/usb_bus/00:1f.2-1:0/
|-- drivers
| `-- usb:usb_mouse -> ../../../bus/drivers/usb_mouse/
|-- mouse
| `-- 1 -> ../../../root/pci0/00:1f.0/usb_bus/00:1f.2-1:0/
`-- evdev
`-- 1 -> ../../../root/pci0/00:1f.0/usb_bus/00:1f.2-1:0/
Future Plans
~~~~~~~~~~~~
A device interface is correlated directly with a userspace interface
for a device, specifically a device node. For instance, a SCSI disk
exposes at least two interfaces to userspace: the standard SCSI disk
interface and the SCSI generic interface. It might also export a raw
device interface.
Many interfaces have a major number associated with them and each
device gets a minor number. Or, multiple interfaces might share one
major number, and each will receive a range of minor numbers (like in
the case of input devices).
These major and minor numbers could be stored in the interface
structure. Major and minor allocations could happen when the interface
is registered with the class, or via a helper function.
Documentation/filesystems/vfs.txt
View file @ 1fef8917
......@@ -660,11 +660,10 @@ struct address_space_operations {
releasepage: releasepage is called on PagePrivate pages to indicate
that the page should be freed if possible. ->releasepage
should remove any private data from the page and clear the
PagePrivate flag. It may also remove the page from the
address_space. If this fails for some reason, it may indicate
failure with a 0 return value.
This is used in two distinct though related cases. The first
is when the VM finds a clean page with no active users and
PagePrivate flag. If releasepage() fails for some reason, it must
indicate failure with a 0 return value.
releasepage() is used in two distinct though related cases. The
first is when the VM finds a clean page with no active users and
wants to make it a free page. If ->releasepage succeeds, the
page will be removed from the address_space and become free.
......
MAINTAINERS
View file @ 1fef8917
......@@ -2060,7 +2060,7 @@ F: Documentation/blockdev/drbd/
DRIVER CORE, KOBJECTS, DEBUGFS AND SYSFS
M: Greg Kroah-Hartman <gregkh@suse.de>
T: quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6.git
S: Supported
F: Documentation/kobject.txt
F: drivers/base/
......@@ -2080,7 +2080,7 @@ F: include/drm/
INTEL DRM DRIVERS (excluding Poulsbo, Moorestown and derivative chipsets)
M: Chris Wilson <chris@chris-wilson.co.uk>
L: intel-gfx@lists.freedesktop.org
L: intel-gfx@lists.freedesktop.org (subscribers-only)
L: dri-devel@lists.freedesktop.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/ickle/drm-intel.git
S: Supported
......@@ -4064,9 +4064,8 @@ F: drivers/scsi/NCR_D700.*
NETEFFECT IWARP RNIC DRIVER (IW_NES)
M: Faisal Latif <faisal.latif@intel.com>
M: Chien Tung <chien.tin.tung@intel.com>
L: linux-rdma@vger.kernel.org
W: http://www.neteffect.com
W: http://www.intel.com/Products/Server/Adapters/Server-Cluster/Server-Cluster-overview.htm
S: Supported
F: drivers/infiniband/hw/nes/
......
Makefile
View file @ 1fef8917
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 37
EXTRAVERSION = -rc4
EXTRAVERSION = -rc5
NAME = Flesh-Eating Bats with Fangs
# *DOCUMENTATION*
......
arch/arm/Kconfig
View file @ 1fef8917
......@@ -9,7 +9,7 @@ config ARM
select GENERIC_ATOMIC64 if (!CPU_32v6K || !AEABI)
select HAVE_OPROFILE if (HAVE_PERF_EVENTS)
select HAVE_ARCH_KGDB
select HAVE_KPROBES if (!XIP_KERNEL)
select HAVE_KPROBES if (!XIP_KERNEL && !THUMB2_KERNEL)
select HAVE_KRETPROBES if (HAVE_KPROBES)
select HAVE_FUNCTION_TRACER if (!XIP_KERNEL)
select HAVE_FTRACE_MCOUNT_RECORD if (!XIP_KERNEL)
......@@ -351,6 +351,14 @@ config ARCH_MXC
help
Support for Freescale MXC/iMX-based family of processors
config ARCH_MXS
bool "Freescale MXS-based"
select GENERIC_CLOCKEVENTS
select ARCH_REQUIRE_GPIOLIB
select COMMON_CLKDEV
help
Support for Freescale MXS-based family of processors
config ARCH_STMP3XXX
bool "Freescale STMP3xxx"
select CPU_ARM926T
......@@ -902,6 +910,8 @@ source "arch/arm/mach-mv78xx0/Kconfig"
source "arch/arm/plat-mxc/Kconfig"
source "arch/arm/mach-mxs/Kconfig"
source "arch/arm/mach-netx/Kconfig"
source "arch/arm/mach-nomadik/Kconfig"
......
arch/arm/Makefile
View file @ 1fef8917
......@@ -158,6 +158,7 @@ machine-$(CONFIG_ARCH_MX25) := imx
machine-$(CONFIG_ARCH_MX3) := mx3
machine-$(CONFIG_ARCH_MX5) := mx5
machine-$(CONFIG_ARCH_MXC91231) := mxc91231
machine-$(CONFIG_ARCH_MXS) := mxs
machine-$(CONFIG_ARCH_NETX) := netx
machine-$(CONFIG_ARCH_NOMADIK) := nomadik
machine-$(CONFIG_ARCH_NS9XXX) := ns9xxx
......
arch/arm/boot/Makefile
View file @ 1fef8917
......@@ -70,12 +70,7 @@ else
$(obj)/uImage: LOADADDR=$(ZRELADDR)
endif
ifeq ($(CONFIG_THUMB2_KERNEL),y)
# Set bit 0 to 1 so that "mov pc, rx" switches to Thumb-2 mode
$(obj)/uImage: STARTADDR=$(shell echo $(LOADADDR) | sed -e "s/.$$/1/")
else
$(obj)/uImage: STARTADDR=$(LOADADDR)
endif
$(obj)/uImage: $(obj)/zImage FORCE
$(call if_changed,uimage)
......
arch/arm/boot/bootp/init.S
View file @ 1fef8917
......@@ -73,6 +73,8 @@ move: ldmia r4!, {r7 - r10} @ move 32-bytes at a time
.size _start, . - _start
.align
.type data,#object
data: .word initrd_start @ source initrd address
.word initrd_phys @ destination initrd address
......
arch/arm/boot/compressed/head.S
View file @ 1fef8917
......@@ -125,9 +125,13 @@ wait: mrc p14, 0, pc, c0, c1, 0
* sort out different calling conventions
*/
.align
.arm @ Always enter in ARM state
start:
.type start,#function
.rept 8
THUMB( adr r12, BSYM(1f) )
THUMB( bx r12 )
THUMB( .rept 6 )
ARM( .rept 8 )
mov r0, r0
.endr
......@@ -135,6 +139,7 @@ start:
.word 0x016f2818 @ Magic numbers to help the loader
.word start @ absolute load/run zImage address
.word _edata @ zImage end address
THUMB( .thumb )
1: mov r7, r1 @ save architecture ID
mov r8, r2 @ save atags pointer
......@@ -174,7 +179,8 @@ not_angel:
ldr sp, [r0, #28]
#ifdef CONFIG_AUTO_ZRELADDR
@ determine final kernel image address
and r4, pc, #0xf8000000
mov r4, pc
and r4, r4, #0xf8000000
add r4, r4, #TEXT_OFFSET
#else
ldr r4, =zreladdr
......@@ -445,7 +451,8 @@ __setup_mmu: sub r3, r4, #16384 @ Page directory size
*/
mov r1, #0x1e
orr r1, r1, #3 << 10
mov r2, pc, lsr #20
mov r2, pc
mov r2, r2, lsr #20
orr r1, r1, r2, lsl #20
add r0, r3, r2, lsl #2
str r1, [r0], #4
......
arch/arm/common/gic.c
View file @ 1fef8917
......@@ -146,9 +146,15 @@ static int gic_set_cpu(unsigned int irq, const struct cpumask *mask_val)
unsigned int shift = (irq % 4) * 8;
unsigned int cpu = cpumask_first(mask_val);
u32 val;
struct irq_desc *desc;
spin_lock(&irq_controller_lock);
irq_desc[irq].node = cpu;
desc = irq_to_desc(irq);
if (desc == NULL) {
spin_unlock(&irq_controller_lock);
return -EINVAL;
}
desc->node = cpu;
val = readl(reg) & ~(0xff << shift);
val |= 1 << (cpu + shift);
writel(val, reg);
......@@ -210,7 +216,7 @@ void __init gic_cascade_irq(unsigned int gic_nr, unsigned int irq)
void __init gic_dist_init(unsigned int gic_nr, void __iomem *base,
unsigned int irq_start)
{
unsigned int max_irq, i;
unsigned int gic_irqs, irq_limit, i;
u32 cpumask = 1 << smp_processor_id();
if (gic_nr >= MAX_GIC_NR)
......@@ -226,47 +232,49 @@ void __init gic_dist_init(unsigned int gic_nr, void __iomem *base,
/*
* Find out how many interrupts are supported.
*/
max_irq = readl(base + GIC_DIST_CTR) & 0x1f;
max_irq = (max_irq + 1) * 32;
/*
* The GIC only supports up to 1020 interrupt sources.
* Limit this to either the architected maximum, or the
* platform maximum.
*/
if (max_irq > max(1020, NR_IRQS))
max_irq = max(1020, NR_IRQS);
gic_irqs = readl(base + GIC_DIST_CTR) & 0x1f;
gic_irqs = (gic_irqs + 1) * 32;
if (gic_irqs > 1020)
gic_irqs = 1020;
/*
* Set all global interrupts to be level triggered, active low.
*/
for (i = 32; i < max_irq; i += 16)
for (i = 32; i < gic_irqs; i += 16)
writel(0, base + GIC_DIST_CONFIG + i * 4 / 16);
/*
* Set all global interrupts to this CPU only.
*/
for (i = 32; i < max_irq; i += 4)
for (i = 32; i < gic_irqs; i += 4)
writel(cpumask, base + GIC_DIST_TARGET + i * 4 / 4);
/*
* Set priority on all global interrupts.
*/
for (i = 32; i < max_irq; i += 4)
for (i = 32; i < gic_irqs; i += 4)
writel(0xa0a0a0a0, base + GIC_DIST_PRI + i * 4 / 4);
/*
* Disable all interrupts. Leave the PPI and SGIs alone
* as these enables are banked registers.
*/
for (i = 32; i < max_irq; i += 32)
for (i = 32; i < gic_irqs; i += 32)
writel(0xffffffff, base + GIC_DIST_ENABLE_CLEAR + i * 4 / 32);
/*
* Limit number of interrupts registered to the platform maximum
*/
irq_limit = gic_data[gic_nr].irq_offset + gic_irqs;
if (WARN_ON(irq_limit > NR_IRQS))
irq_limit = NR_IRQS;
/*
* Setup the Linux IRQ subsystem.
*/
for (i = irq_start; i < gic_data[gic_nr].irq_offset + max_irq; i++) {
for (i = irq_start; i < irq_limit; i++) {
set_irq_chip(i, &gic_chip);
set_irq_chip_data(i, &gic_data[gic_nr]);
set_irq_handler(i, handle_level_irq);
......
arch/arm/configs/picotux200_defconfig → arch/arm/configs/at91rm9200_defconfig
View file @ 1fef8917
CONFIG_EXPERIMENTAL=y
# CONFIG_LOCALVERSION_AUTO is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_IKCONFIG=m
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_EMBEDDED=y
# CONFIG_KALLSYMS is not set
CONFIG_SLAB=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_AT91=y
CONFIG_MACH_ONEARM=y
CONFIG_ARCH_AT91RM9200DK=y
CONFIG_MACH_AT91RM9200EK=y
CONFIG_MACH_CSB337=y
CONFIG_MACH_CSB637=y
CONFIG_MACH_CARMEVA=y
CONFIG_MACH_ATEB9200=y
CONFIG_MACH_KB9200=y
CONFIG_MACH_PICOTUX2XX=y
CONFIG_MACH_KAFA=y
CONFIG_MACH_ECBAT91=y
CONFIG_MACH_YL9200=y
CONFIG_MACH_CPUAT91=y
CONFIG_MACH_ECO920=y
CONFIG_MTD_AT91_DATAFLASH_CARD=y
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
CONFIG_AT91_TIMER_HZ=100
# CONFIG_ARM_THUMB is not set
CONFIG_PCCARD=y
CONFIG_AT91_CF=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_PREEMPT=y
CONFIG_AEABI=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_LEDS=y
CONFIG_LEDS_CPU=y
CONFIG_ZBOOT_ROM_TEXT=0x10000000
CONFIG_ZBOOT_ROM_BSS=0x20040000
CONFIG_KEXEC=y
CONFIG_FPE_NWFPE=y
CONFIG_BINFMT_MISC=m
CONFIG_BINFMT_MISC=y
CONFIG_NET=y
CONFIG_PACKET=m
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_XFRM_USER=m
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
......@@ -34,7 +63,6 @@ CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_DIAG=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
......@@ -55,26 +83,50 @@ CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m
CONFIG_FW_LOADER=m
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_AFS_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=y
CONFIG_BLK_DEV_LOOP=m
CONFIG_MTD_PLATRAM=y
CONFIG_MTD_DATAFLASH=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_ATMEL=y
CONFIG_MTD_NAND_PLATFORM=y
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_GLUEBI=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_ATMEL_TCLIB=y
CONFIG_EEPROM_LEGACY=m
CONFIG_SCSI=m
CONFIG_BLK_DEV_SD=m
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_NETDEVICES=y
CONFIG_TUN=m
CONFIG_PHYLIB=y
CONFIG_DAVICOM_PHY=y
CONFIG_SMSC_PHY=y
CONFIG_MICREL_PHY=y
CONFIG_NET_ETHERNET=y
CONFIG_ARM_AT91_ETHER=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
......@@ -83,34 +135,40 @@ CONFIG_USB_USBNET=m
CONFIG_USB_NET_DM9601=m
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_PLUSB=m
CONFIG_USB_NET_MCS7830=m
CONFIG_USB_NET_RNDIS_HOST=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
CONFIG_PPP=m
CONFIG_PPP=y
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_ASYNC=y
CONFIG_PPP_DEFLATE=y
CONFIG_PPP_BSDCOMP=y
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
CONFIG_INPUT_EVDEV=y
CONFIG_KEYBOARD_GPIO=y
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
# CONFIG_VT is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_I2C=m
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_GPIO=m
CONFIG_LEGACY_PTY_COUNT=32
CONFIG_HW_RANDOM=y
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_GPIO=y
CONFIG_SPI=y
CONFIG_SPI_ATMEL=y
CONFIG_SPI_BITBANG=y
CONFIG_GPIO_SYSFS=y
CONFIG_HWMON=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
......@@ -123,6 +181,7 @@ CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM73=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
......@@ -142,42 +201,100 @@ CONFIG_SENSORS_W83793=m
CONFIG_SENSORS_W83L785TS=m
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
CONFIG_AT91RM9200_WATCHDOG=m
CONFIG_HID=m
CONFIG_USB=m
CONFIG_AT91RM9200_WATCHDOG=y
CONFIG_FB=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
CONFIG_FB_S1D13XXX=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not set
CONFIG_DISPLAY_SUPPORT=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FONTS=y
CONFIG_FONT_MINI_4x6=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_USB=y
CONFIG_USB_DEVICEFS=y
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_DEVICE_CLASS is not set
CONFIG_USB_MON=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_STORAGE=m
CONFIG_USB_SERIAL=m
CONFIG_USB_STORAGE=y
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_CONSOLE=y
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_PL2303=m
CONFIG_MMC=m
CONFIG_MMC_AT91=m
CONFIG_RTC_CLASS=m
CONFIG_RTC_DRV_AT91RM9200=m
CONFIG_EXT2_FS=m
CONFIG_EXT3_FS=m
CONFIG_USB_SERIAL_FTDI_SIO=y
CONFIG_USB_SERIAL_KEYSPAN=y
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
CONFIG_USB_SERIAL_MCT_U232=y
CONFIG_USB_SERIAL_PL2303=y
CONFIG_USB_GADGET=y
CONFIG_USB_ETH=m
CONFIG_USB_MASS_STORAGE=m
CONFIG_MMC=y
CONFIG_MMC_AT91=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_GPIO=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
CONFIG_RTC_DRV_DS1307=y
CONFIG_RTC_DRV_PCF8563=y
CONFIG_RTC_DRV_AT91RM9200=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_INOTIFY=y
CONFIG_ISO9660_FS=m
CONFIG_REISERFS_FS=y
CONFIG_AUTOFS4_FS=y
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_UDF_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_ZISOFS=y
CONFIG_UDF_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_NTFS_FS=m
CONFIG_TMPFS=y
CONFIG_CONFIGFS_FS=y
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_SUMMARY=y
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
CONFIG_NFS_FS=m
CONFIG_JFFS2_LZO=y
CONFIG_JFFS2_RUBIN=y
CONFIG_CRAMFS=y
CONFIG_MINIX_FS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
CONFIG_SMB_FS=m
CONFIG_CIFS=m
CONFIG_PARTITION_ADVANCED=y
CONFIG_AMIGA_PARTITION=y
CONFIG_NLS_DEFAULT="utf-8"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_MAC_PARTITION=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
......@@ -201,7 +318,7 @@ CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
......@@ -214,29 +331,11 @@ CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
CONFIG_NLS_UTF8=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_LL=y
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_LIBCRC32C=m
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_FTRACE is not set
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_SHA1=y
arch/arm/configs/at91rm9200dk_defconfig deleted 100644 → 0
View file @ d3d4b60b
CONFIG_EXPERIMENTAL=y
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91RM9200DK=y
CONFIG_MACH_ECO920=y
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
# CONFIG_ARM_THUMB is not set
CONFIG_PCCARD=y
CONFIG_AT91_CF=y
CONFIG_LEDS=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw"
CONFIG_FPE_NWFPE=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_IPV6 is not set
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_PHYSMAP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_ARM_AT91_ETHER=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_GPIO=y
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
CONFIG_AT91RM9200_WATCHDOG=y
# CONFIG_VGA_CONSOLE is not set
# CONFIG_USB_HID is not set
CONFIG_USB=y
CONFIG_USB_DEBUG=y
CONFIG_USB_DEVICEFS=y
CONFIG_USB_MON=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_GADGET=y
CONFIG_MMC=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_AT91RM9200=y
CONFIG_EXT2_FS=y
CONFIG_INOTIFY=y
CONFIG_TMPFS=y
CONFIG_CRAMFS=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_LL=y
arch/arm/configs/at91rm9200ek_defconfig deleted 100644 → 0
View file @ d3d4b60b
CONFIG_EXPERIMENTAL=y
# CONFIG_LOCALVERSION_AUTO is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_AT91=y
CONFIG_MACH_AT91RM9200EK=y
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
# CONFIG_ARM_THUMB is not set
CONFIG_LEDS=y
CONFIG_LEDS_CPU=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw"
CONFIG_FPE_NWFPE=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_IPV6 is not set
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_PHYSMAP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_ARM_AT91_ETHER=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_GPIO=y
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
CONFIG_AT91RM9200_WATCHDOG=y
CONFIG_FB=y
CONFIG_FB_S1D13XXX=y
# CONFIG_VGA_CONSOLE is not set
# CONFIG_USB_HID is not set
CONFIG_USB=y
CONFIG_USB_DEBUG=y
CONFIG_USB_DEVICEFS=y
CONFIG_USB_MON=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_GADGET=y
CONFIG_MMC=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_AT91RM9200=y
CONFIG_EXT2_FS=y
CONFIG_INOTIFY=y
CONFIG_TMPFS=y
CONFIG_CRAMFS=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_LL=y
arch/arm/configs/ateb9200_defconfig deleted 100644 → 0
View file @ d3d4b60b
CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_EMBEDDED=y
CONFIG_SLAB=y
CONFIG_PROFILING=y
CONFIG_OPROFILE=m
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_ARCH_AT91=y
CONFIG_MACH_ATEB9200=y
CONFIG_PCCARD=m
CONFIG_AT91_CF=m
CONFIG_PREEMPT=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_FPE_NWFPE=y
CONFIG_PM=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_NET_KEY=y
CONFIG_INET=y
# CONFIG_IPV6 is not set
CONFIG_BRIDGE=m
CONFIG_VLAN_8021Q=m
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK_RO=y
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_NBD=m
CONFIG_SCSI=m
CONFIG_BLK_DEV_SD=m
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
CONFIG_SCSI_MULTI_LUN=y
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
CONFIG_TUN=m
CONFIG_PHYLIB=y
CONFIG_DAVICOM_PHY=y
CONFIG_NET_ETHERNET=y
CONFIG_ARM_AT91_ETHER=y
CONFIG_USB_USBNET=y
CONFIG_USB_NET_GL620A=y
CONFIG_USB_NET_PLUSB=y
CONFIG_USB_NET_RNDIS_HOST=y
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_EPSON2888=y
CONFIG_PPP=m
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPPOE=m
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
CONFIG_I2C=m
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_GPIO=m
# CONFIG_VGA_CONSOLE is not set
CONFIG_SOUND=y
CONFIG_USB_HID=m
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y
CONFIG_USB=y
CONFIG_USB_DEVICEFS=y
CONFIG_USB_MON=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_STORAGE=m
CONFIG_USB_STORAGE_DATAFAB=m
CONFIG_USB_STORAGE_FREECOM=m
CONFIG_USB_STORAGE_USBAT=m
CONFIG_USB_STORAGE_SDDR09=m
CONFIG_USB_STORAGE_SDDR55=m
CONFIG_USB_STORAGE_JUMPSHOT=m
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_GADGET=m
CONFIG_USB_ETH=m
CONFIG_USB_GADGETFS=m
CONFIG_USB_FILE_STORAGE=m
CONFIG_USB_G_SERIAL=m
CONFIG_MMC=m
CONFIG_MMC_DEBUG=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
CONFIG_RTC_DRV_AT91RM9200=y
CONFIG_EXT2_FS=m
CONFIG_EXT3_FS=m
CONFIG_REISERFS_FS=m
CONFIG_INOTIFY=y
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_NTFS_FS=m
CONFIG_NTFS_RW=y
CONFIG_TMPFS=y
CONFIG_CRAMFS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_NFSD=m
CONFIG_NFSD_V4=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_MAC_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_UTF8=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRC16=m
CONFIG_LIBCRC32C=m
arch/arm/configs/carmeva_defconfig deleted 100644 → 0
View file @ d3d4b60b
CONFIG_EXPERIMENTAL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
CONFIG_EMBEDDED=y
# CONFIG_HOTPLUG is not set
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_ARCH_AT91=y
CONFIG_MACH_CARMEVA=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_FPE_NWFPE=y
CONFIG_NET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_PNP=y
# CONFIG_IPV6 is not set
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_BLK_DEV_RAM=y
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_ARM_AT91_ETHER=y
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
CONFIG_SERIO=m
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
# CONFIG_VGA_CONSOLE is not set
CONFIG_MMC=m
CONFIG_MMC_DEBUG=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
# CONFIG_DNOTIFY is not set
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
arch/arm/configs/cpuat91_defconfig deleted 100644 → 0
View file @ d3d4b60b
CONFIG_EXPERIMENTAL=y
# CONFIG_LOCALVERSION_AUTO is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_AT91=y
CONFIG_MACH_CPUAT91=y
CONFIG_AT91_TIMER_HZ=100
# CONFIG_ARM_THUMB is not set
CONFIG_PREEMPT=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_PNP=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PLATRAM=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_RAM=y
# CONFIG_MISC_DEVICES is not set
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_NETDEVICES=y
CONFIG_PHYLIB=y
CONFIG_NET_ETHERNET=y
CONFIG_ARM_AT91_ETHER=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
CONFIG_PPP=y
CONFIG_PPP_ASYNC=y
CONFIG_PPP_DEFLATE=y
CONFIG_PPP_BSDCOMP=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
CONFIG_LEGACY_PTY_COUNT=32
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_GPIO=y
CONFIG_GPIO_SYSFS=y
# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
CONFIG_AT91RM9200_WATCHDOG=y
# CONFIG_VGA_CONSOLE is not set
# CONFIG_HID_SUPPORT is not set
CONFIG_USB=y
# CONFIG_USB_DEVICE_CLASS is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
CONFIG_USB_ETH=m
CONFIG_MMC=y
CONFIG_MMC_AT91=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_GPIO=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
CONFIG_RTC_DRV_DS1307=y
CONFIG_RTC_DRV_PCF8563=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_INOTIFY=y
CONFIG_AUTOFS4_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_SUMMARY=y
CONFIG_CRAMFS=y
CONFIG_MINIX_FS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_ROOT_NFS=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_UTF8=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
arch/arm/configs/csb337_defconfig deleted 100644 → 0
View file @ d3d4b60b
CONFIG_EXPERIMENTAL=y
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_ARCH_AT91=y
CONFIG_MACH_CSB337=y
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
# CONFIG_ARM_THUMB is not set
CONFIG_PCCARD=y
CONFIG_AT91_CF=y
CONFIG_LEDS=y
CONFIG_LEDS_CPU=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="mem=32M console=ttyS0,38400 initrd=0x20410000,3145728 root=/dev/ram0 rw"
CONFIG_FPE_NWFPE=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_PHYSMAP=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_ATMEL_SSC=y
CONFIG_SCSI=y
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_ARM_AT91_ETHER=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_GPIO=y
# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
CONFIG_AT91RM9200_WATCHDOG=y
# CONFIG_VGA_CONSOLE is not set
# CONFIG_USB_HID is not set
CONFIG_USB=y
CONFIG_USB_DEBUG=y
CONFIG_USB_DEVICEFS=y
CONFIG_USB_MON=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_CONSOLE=y
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_FTDI_SIO=y
CONFIG_USB_SERIAL_KEYSPAN=y
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
CONFIG_USB_SERIAL_MCT_U232=y
CONFIG_USB_GADGET=y
CONFIG_MMC=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc1"
# CONFIG_RTC_INTF_SYSFS is not set
CONFIG_RTC_DRV_DS1307=y
CONFIG_RTC_DRV_AT91RM9200=y
CONFIG_EXT2_FS=y
CONFIG_INOTIFY=y
CONFIG_TMPFS=y
CONFIG_CRAMFS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_LL=y
arch/arm/configs/csb637_defconfig deleted 100644 → 0
View file @ d3d4b60b
CONFIG_EXPERIMENTAL=y
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_ARCH_AT91=y
CONFIG_MACH_CSB637=y
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
# CONFIG_ARM_THUMB is not set
CONFIG_PCCARD=y
CONFIG_AT91_CF=y
CONFIG_LEDS=y
CONFIG_LEDS_CPU=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="mem=32M console=ttyS0,38400 initrd=0x20410000,3145728 root=/dev/ram0 rw"
CONFIG_FPE_NWFPE=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_PHYSMAP=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_SCSI=y
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_ARM_AT91_ETHER=y
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
CONFIG_AT91RM9200_WATCHDOG=y
# CONFIG_VGA_CONSOLE is not set
# CONFIG_USB_HID is not set
CONFIG_USB=y
CONFIG_USB_DEBUG=y
CONFIG_USB_DEVICEFS=y
CONFIG_USB_MON=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_CONSOLE=y
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_FTDI_SIO=y
CONFIG_USB_SERIAL_KEYSPAN=y
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
CONFIG_USB_SERIAL_MCT_U232=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_EXT2_FS=y
CONFIG_INOTIFY=y
CONFIG_TMPFS=y
CONFIG_CRAMFS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_LL=y
arch/arm/configs/ecbat91_defconfig deleted 100644 → 0
View file @ d3d4b60b
CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_AT91=y
CONFIG_MACH_ECBAT91=y
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
CONFIG_PCCARD=y
CONFIG_AT91_CF=y
CONFIG_PREEMPT=y
CONFIG_LEDS=y
CONFIG_LEDS_CPU=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="rootfstype=reiserfs root=/dev/mmcblk0p1 console=ttyS0,115200n8 rootdelay=1"
CONFIG_FPE_NWFPE=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_IPV6 is not set
CONFIG_CFG80211=y
CONFIG_MAC80211=y
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_AFS_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_DATAFLASH=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_SG=y
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_ARM_AT91_ETHER=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
CONFIG_PPP=y
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
CONFIG_HW_RANDOM=y
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_SPI=y
CONFIG_SPI_BITBANG=y
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
# CONFIG_VGA_CONSOLE is not set
# CONFIG_USB_HID is not set
CONFIG_USB=y
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_PRINTER=y
CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
CONFIG_MMC=y
CONFIG_MMC_DEBUG=y
CONFIG_MMC_AT91=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
CONFIG_RTC_DRV_AT91RM9200=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
CONFIG_REISERFS_FS=y
CONFIG_INOTIFY=y
CONFIG_TMPFS=y
CONFIG_CONFIGFS_FS=y
CONFIG_CRAMFS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_DEBUG_USER=y
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_SHA1=y
arch/arm/configs/kafa_defconfig deleted 100644 → 0
View file @ d3d4b60b
CONFIG_EXPERIMENTAL=y
# CONFIG_LOCALVERSION_AUTO is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_AT91=y
CONFIG_MACH_KAFA=y
# CONFIG_ARM_THUMB is not set
CONFIG_PREEMPT=y
CONFIG_LEDS=y
CONFIG_LEDS_CPU=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20800000,10M root=/dev/ram0 rw"
CONFIG_FPE_NWFPE=y
CONFIG_BINFMT_MISC=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
# CONFIG_INET_DIAG is not set
# CONFIG_IPV6 is not set
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK_RO=y
CONFIG_NETDEVICES=y
CONFIG_PHYLIB=y
CONFIG_DAVICOM_PHY=y
CONFIG_NET_ETHERNET=y
CONFIG_ARM_AT91_ETHER=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
CONFIG_LEGACY_PTY_COUNT=32
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_GPIO=y
# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
CONFIG_AT91RM9200_WATCHDOG=y
# CONFIG_VGA_CONSOLE is not set
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
CONFIG_RTC_DRV_AT91RM9200=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_TMPFS=y
CONFIG_CRAMFS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_DES=y
arch/arm/configs/kb9202_defconfig deleted 100644 → 0
View file @ d3d4b60b
CONFIG_EXPERIMENTAL=y
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_AUDIT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_ARCH_AT91=y
CONFIG_MACH_KB9200=y
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_PREEMPT=y
CONFIG_AEABI=y
CONFIG_ZBOOT_ROM_TEXT=0x10000000
CONFIG_ZBOOT_ROM_BSS=0x20040000
CONFIG_CMDLINE="noinitrd root=/dev/mtdblock0 rootfstype=jffs2 mem=64M"
CONFIG_KEXEC=y
CONFIG_FPE_NWFPE=y
CONFIG_BINFMT_MISC=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_MTD=y
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_ATMEL=y
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_GLUEBI=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=16384
CONFIG_ATMEL_TCLIB=y
CONFIG_ATMEL_SSC=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_SG=y
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SPI_ATTRS=m
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_ARM_AT91_ETHER=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_AT91RM9200_WATCHDOG=y
CONFIG_FB=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not set
# CONFIG_VGA_CONSOLE is not set
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FONTS=y
CONFIG_FONT_MINI_4x6=y
# CONFIG_HID_SUPPORT is not set
CONFIG_USB=y
CONFIG_USB_DEVICEFS=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_USB_LIBUSUAL=y
CONFIG_MMC=y
CONFIG_MMC_AT91=m
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_AT91RM9200=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
CONFIG_CONFIGFS_FS=y
CONFIG_JFFS2_FS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_ROOT_NFS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_UTF8=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_KERNEL=y
# CONFIG_SCHED_DEBUG is not set
# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
arch/arm/configs/onearm_defconfig deleted 100644 → 0
View file @ d3d4b60b
CONFIG_EXPERIMENTAL=y
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
CONFIG_EMBEDDED=y
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_AT91=y
CONFIG_MACH_ONEARM=y
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
# CONFIG_ARM_THUMB is not set
CONFIG_PCCARD=y
CONFIG_AT91_CF=y
CONFIG_LEDS=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp mem=64M"
CONFIG_FPE_NWFPE=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IPV6=y
# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
# CONFIG_INET6_XFRM_MODE_BEET is not set
# CONFIG_IPV6_SIT is not set
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_PHYSMAP=y
CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_ARM_AT91_ETHER=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
# CONFIG_VT is not set
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
CONFIG_AT91RM9200_WATCHDOG=y
# CONFIG_USB_HID is not set
CONFIG_USB=y
CONFIG_USB_DEBUG=y
CONFIG_USB_DEVICEFS=y
CONFIG_USB_MON=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_GADGET=y
CONFIG_MMC=y
CONFIG_EXT2_FS=y
CONFIG_INOTIFY=y
CONFIG_TMPFS=y
CONFIG_CRAMFS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_ROOT_NFS=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_LL=y
arch/arm/configs/yl9200_defconfig deleted 100644 → 0
View file @ d3d4b60b
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91RM9200DK=y
CONFIG_MACH_YL9200=y
# CONFIG_ARM_THUMB is not set
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw"
CONFIG_FPE_NWFPE=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PLATRAM=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_ATMEL=y
CONFIG_MTD_NAND_PLATFORM=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=3
CONFIG_BLK_DEV_RAM_SIZE=8192
# CONFIG_MISC_DEVICES is not set
CONFIG_BLK_DEV_SD=y
CONFIG_ATA=y
CONFIG_NETDEVICES=y
CONFIG_PHYLIB=y
CONFIG_DAVICOM_PHY=y
CONFIG_NET_ETHERNET=y
CONFIG_ARM_AT91_ETHER=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
CONFIG_INPUT_EVDEV=y
# CONFIG_KEYBOARD_ATKBD is not set
CONFIG_KEYBOARD_GPIO=y
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=y
# CONFIG_SERIO_SERPORT is not set
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=y
CONFIG_SPI=y
CONFIG_SPI_DEBUG=y
CONFIG_SPI_ATMEL=y
CONFIG_FB=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_DISPLAY_SUPPORT=y
# CONFIG_VGA_CONSOLE is not set
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_USB=y
CONFIG_USB_DEBUG=y
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
CONFIG_USB_MON=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_M66592=y
CONFIG_USB_FILE_STORAGE=m
CONFIG_MMC=y
CONFIG_MMC_DEBUG=y
# CONFIG_MMC_BLOCK_BOUNCE is not set
CONFIG_MMC_AT91=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_AT91RM9200=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT3_FS=y
CONFIG_REISERFS_FS=y
CONFIG_INOTIFY=y
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=1
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
CONFIG_JFFS2_RUBIN=y
CONFIG_CRAMFS=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_MAC_PARTITION=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_KERNEL=y
CONFIG_SLUB_DEBUG_ON=y
CONFIG_DEBUG_KOBJECT=y
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_LIST=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
CONFIG_DEBUG_LL=y
arch/arm/kernel/entry-armv.S
View file @ 1fef8917
......@@ -911,7 +911,7 @@ __kuser_cmpxchg: @ 0xffff0fc0
* A special ghost syscall is used for that (see traps.c).
*/
stmfd sp!, {r7, lr}
ldr r7, =1f @ it's 20 bits
ldr r7, 1f @ it's 20 bits
swi __ARM_NR_cmpxchg
ldmfd sp!, {r7, pc}
1: .word __ARM_NR_cmpxchg
......
arch/arm/kernel/head.S
View file @ 1fef8917
......@@ -85,9 +85,11 @@ ENTRY(stext)
mrc p15, 0, r9, c0, c0 @ get processor id
bl __lookup_processor_type @ r5=procinfo r9=cpuid
movs r10, r5 @ invalid processor (r5=0)?
THUMB( it eq ) @ force fixup-able long branch encoding
beq __error_p @ yes, error 'p'
bl __lookup_machine_type @ r5=machinfo
movs r8, r5 @ invalid machine (r5=0)?
THUMB( it eq ) @ force fixup-able long branch encoding
beq __error_a @ yes, error 'a'
bl __vet_atags
#ifdef CONFIG_SMP_ON_UP
......@@ -262,6 +264,7 @@ __create_page_tables:
mov pc, lr
ENDPROC(__create_page_tables)
.ltorg
.align
__enable_mmu_loc:
.long .
.long __enable_mmu
......@@ -282,6 +285,7 @@ ENTRY(secondary_startup)
bl __lookup_processor_type
movs r10, r5 @ invalid processor?
moveq r0, #'p' @ yes, error 'p'
THUMB( it eq ) @ force fixup-able long branch encoding
beq __error_p
/*
......@@ -308,6 +312,8 @@ ENTRY(__secondary_switched)
b secondary_start_kernel
ENDPROC(__secondary_switched)
.align
.type __secondary_data, %object
__secondary_data:
.long .
......@@ -413,6 +419,7 @@ __fixup_smp_on_up:
mov pc, lr
ENDPROC(__fixup_smp)
.align
1: .word .
.word __smpalt_begin
.word __smpalt_end
......
arch/arm/kernel/relocate_kernel.S
View file @ 1fef8917
......@@ -59,6 +59,8 @@ relocate_new_kernel:
ldr r2,kexec_boot_atags
mov pc,lr
.align
.globl kexec_start_address
kexec_start_address:
.long 0x0
......
arch/arm/mach-at91/Makefile
View file @ 1fef8917
......@@ -24,8 +24,8 @@ obj-$(CONFIG_ARCH_AT91X40) += at91x40.o at91x40_time.o
# AT91RM9200 board-specific support
obj-$(CONFIG_MACH_ONEARM) += board-1arm.o
obj-$(CONFIG_ARCH_AT91RM9200DK) += board-dk.o
obj-$(CONFIG_MACH_AT91RM9200EK) += board-ek.o
obj-$(CONFIG_ARCH_AT91RM9200DK) += board-rm9200dk.o
obj-$(CONFIG_MACH_AT91RM9200EK) += board-rm9200ek.o
obj-$(CONFIG_MACH_CSB337) += board-csb337.o
obj-$(CONFIG_MACH_CSB637) += board-csb637.o
obj-$(CONFIG_MACH_CARMEVA) += board-carmeva.o
......
arch/arm/mach-at91/at91rm9200_devices.c
View file @ 1fef8917
......@@ -1106,51 +1106,6 @@ static inline void configure_usart3_pins(unsigned pins)
static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
struct platform_device *atmel_default_console_device; /* the serial console device */
void __init __deprecated at91_init_serial(struct at91_uart_config *config)
{
int i;
/* Fill in list of supported UARTs */
for (i = 0; i < config->nr_tty; i++) {
switch (config->tty_map[i]) {
case 0:
configure_usart0_pins(ATMEL_UART_CTS | ATMEL_UART_RTS);
at91_uarts[i] = &at91rm9200_uart0_device;
at91_clock_associate("usart0_clk", &at91rm9200_uart0_device.dev, "usart");
break;
case 1:
configure_usart1_pins(ATMEL_UART_CTS | ATMEL_UART_RTS | ATMEL_UART_DSR | ATMEL_UART_DTR | ATMEL_UART_DCD | ATMEL_UART_RI);
at91_uarts[i] = &at91rm9200_uart1_device;
at91_clock_associate("usart1_clk", &at91rm9200_uart1_device.dev, "usart");
break;
case 2:
configure_usart2_pins(0);
at91_uarts[i] = &at91rm9200_uart2_device;
at91_clock_associate("usart2_clk", &at91rm9200_uart2_device.dev, "usart");
break;
case 3:
configure_usart3_pins(0);
at91_uarts[i] = &at91rm9200_uart3_device;
at91_clock_associate("usart3_clk", &at91rm9200_uart3_device.dev, "usart");
break;
case 4:
configure_dbgu_pins();
at91_uarts[i] = &at91rm9200_dbgu_device;
at91_clock_associate("mck", &at91rm9200_dbgu_device.dev, "usart");
break;
default:
continue;
}
at91_uarts[i]->id = i; /* update ID number to mapped ID */
}
/* Set serial console device */
if (config->console_tty < ATMEL_MAX_UART)
atmel_default_console_device = at91_uarts[config->console_tty];
if (!atmel_default_console_device)
printk(KERN_INFO "AT91: No default serial console defined.\n");
}
void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
{
struct platform_device *pdev;
......
arch/arm/mach-at91/board-1arm.c
View file @ 1fef8917
......@@ -39,24 +39,24 @@
#include "generic.h"
/*
* Serial port configuration.
* 0 .. 3 = USART0 .. USART3
* 4 = DBGU
*/
static struct at91_uart_config __initdata onearm_uart_config = {
.console_tty = 0, /* ttyS0 */
.nr_tty = 3,
.tty_map = { 4, 0, 1, -1, -1 }, /* ttyS0, ..., ttyS4 */
};
static void __init onearm_map_io(void)
{
/* Initialize processor: 18.432 MHz crystal */
at91rm9200_initialize(18432000, AT91RM9200_PQFP);
/* Setup the serial ports and console */
at91_init_serial(&onearm_uart_config);
/* DBGU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
/* USART0 on ttyS1 (Rx, Tx, CTS, RTS) */
at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
/* USART1 on ttyS2 (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
at91_register_uart(AT91RM9200_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS
| ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
| ATMEL_UART_RI);
/* set serial console to ttyS0 (ie, DBGU) */
at91_set_serial_console(0);
}
static void __init onearm_init_irq(void)
......
arch/arm/mach-at91/board-kafa.c
View file @ 1fef8917
......@@ -39,17 +39,6 @@
#include "generic.h"
/*
* Serial port configuration.
* 0 .. 3 = USART0 .. USART3
* 4 = DBGU
*/
static struct at91_uart_config __initdata kafa_uart_config = {
.console_tty = 0, /* ttyS0 */
.nr_tty = 2,
.tty_map = { 4, 0, -1, -1, -1 } /* ttyS0, ..., ttyS4 */
};
static void __init kafa_map_io(void)
{
/* Initialize processor: 18.432 MHz crystal */
......@@ -58,8 +47,14 @@ static void __init kafa_map_io(void)
/* Set up the LEDs */
at91_init_leds(AT91_PIN_PB4, AT91_PIN_PB4);
/* Setup the serial ports and console */
at91_init_serial(&kafa_uart_config);
/* DBGU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
/* USART0 on ttyS1 (Rx, Tx, CTS, RTS) */
at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
/* set serial console to ttyS0 (ie, DBGU) */
at91_set_serial_console(0);
}
static void __init kafa_init_irq(void)
......
arch/arm/mach-at91/board-picotux200.c
View file @ 1fef8917
......@@ -43,24 +43,21 @@
#include "generic.h"
/*
* Serial port configuration.
* 0 .. 3 = USART0 .. USART3
* 4 = DBGU
*/
static struct at91_uart_config __initdata picotux200_uart_config = {
.console_tty = 0, /* ttyS0 */
.nr_tty = 2,
.tty_map = { 4, 1, -1, -1, -1 } /* ttyS0, ..., ttyS4 */
};
static void __init picotux200_map_io(void)
{
/* Initialize processor: 18.432 MHz crystal */
at91rm9200_initialize(18432000, AT91RM9200_BGA);
/* Setup the serial ports and console */
at91_init_serial(&picotux200_uart_config);
/* DBGU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
/* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
| ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
| ATMEL_UART_RI);
/* set serial console to ttyS0 (ie, DBGU) */
at91_set_serial_console(0);
}
static void __init picotux200_init_irq(void)
......@@ -77,11 +74,6 @@ static struct at91_usbh_data __initdata picotux200_usbh_data = {
.ports = 1,
};
// static struct at91_udc_data __initdata picotux200_udc_data = {
// .vbus_pin = AT91_PIN_PD4,
// .pullup_pin = AT91_PIN_PD5,
// };
static struct at91_mmc_data __initdata picotux200_mmc_data = {
.det_pin = AT91_PIN_PB27,
.slot_b = 0,
......@@ -89,21 +81,6 @@ static struct at91_mmc_data __initdata picotux200_mmc_data = {
.wp_pin = AT91_PIN_PA17,
};
// static struct spi_board_info picotux200_spi_devices[] = {
// { /* DataFlash chip */
// .modalias = "mtd_dataflash",
// .chip_select = 0,
// .max_speed_hz = 15 * 1000 * 1000,
// },
// #ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
// { /* DataFlash card */
// .modalias = "mtd_dataflash",
// .chip_select = 3,
// .max_speed_hz = 15 * 1000 * 1000,
// },
// #endif
// };
#define PICOTUX200_FLASH_BASE AT91_CHIPSELECT_0
#define PICOTUX200_FLASH_SIZE SZ_4M
......@@ -135,21 +112,11 @@ static void __init picotux200_board_init(void)
at91_add_device_eth(&picotux200_eth_data);
/* USB Host */
at91_add_device_usbh(&picotux200_usbh_data);
/* USB Device */
// at91_add_device_udc(&picotux200_udc_data);
// at91_set_multi_drive(picotux200_udc_data.pullup_pin, 1); /* pullup_pin is connected to reset */
/* I2C */
at91_add_device_i2c(NULL, 0);
/* SPI */
// at91_add_device_spi(picotux200_spi_devices, ARRAY_SIZE(picotux200_spi_devices));
#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
/* DataFlash card */
at91_set_gpio_output(AT91_PIN_PB22, 0);
#else
/* MMC */
at91_set_gpio_output(AT91_PIN_PB22, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */
at91_add_device_mmc(0, &picotux200_mmc_data);
#endif
/* NOR Flash */
platform_device_register(&picotux200_flash);
}
......
arch/arm/mach-at91/board-dk.c → arch/arm/mach-at91/board-rm9200dk.c
View file @ 1fef8917
/*
* linux/arch/arm/mach-at91/board-dk.c
* linux/arch/arm/mach-at91/board-rm9200dk.c
*
* Copyright (C) 2005 SAN People
*
......@@ -91,10 +91,12 @@ static struct at91_cf_data __initdata dk_cf_data = {
// .vcc_pin = ... always powered
};
#ifndef CONFIG_MTD_AT91_DATAFLASH_CARD
static struct at91_mmc_data __initdata dk_mmc_data = {
.slot_b = 0,
.wire4 = 1,
};
#endif
static struct spi_board_info dk_spi_devices[] = {
{ /* DataFlash chip */
......
arch/arm/mach-at91/board-ek.c → arch/arm/mach-at91/board-rm9200ek.c
View file @ 1fef8917
/*
* linux/arch/arm/mach-at91/board-ek.c
* linux/arch/arm/mach-at91/board-rm9200ek.c
*
* Copyright (C) 2005 SAN People
*
......@@ -84,12 +84,14 @@ static struct at91_udc_data __initdata ek_udc_data = {
.pullup_pin = AT91_PIN_PD5,
};
#ifndef CONFIG_MTD_AT91_DATAFLASH_CARD
static struct at91_mmc_data __initdata ek_mmc_data = {
.det_pin = AT91_PIN_PB27,
.slot_b = 0,
.wire4 = 1,
.wp_pin = AT91_PIN_PA17,
};
#endif
static struct spi_board_info ek_spi_devices[] = {
{ /* DataFlash chip */
......
arch/arm/mach-at91/board-yl-9200.c
View file @ 1fef8917
......@@ -387,7 +387,7 @@ static struct spi_board_info yl9200_spi_devices[] = {
* EPSON S1D13806 FB (discontinued chip)
* EPSON S1D13506 FB
*/
#if defined(CONFIG_FB_S1D135XX) || defined(CONFIG_FB_S1D13XXX_MODULE)
#if defined(CONFIG_FB_S1D13XXX) || defined(CONFIG_FB_S1D13XXX_MODULE)
#include <video/s1d13xxxfb.h>
......
arch/arm/mach-at91/include/mach/board.h
View file @ 1fef8917
......@@ -137,13 +137,7 @@ extern void __init at91_add_device_spi(struct spi_board_info *devices, int nr_de
extern void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins);
extern void __init at91_set_serial_console(unsigned portnr);
struct at91_uart_config {
unsigned short console_tty; /* tty number of serial console */
unsigned short nr_tty; /* number of serial tty's */
short tty_map[]; /* map UART to tty number */
};
extern struct platform_device *atmel_default_console_device;
extern void __init __deprecated at91_init_serial(struct at91_uart_config *config);
struct atmel_uart_data {
short use_dma_tx; /* use transmit DMA? */
......
arch/arm/mach-cns3xxx/pcie.c
View file @ 1fef8917
......@@ -369,7 +369,7 @@ static int __init cns3xxx_pcie_init(void)
{
int i;
hook_fault_code(16 + 6, cns3xxx_pcie_abort_handler, SIGBUS,
hook_fault_code(16 + 6, cns3xxx_pcie_abort_handler, SIGBUS, 0,
"imprecise external abort");
for (i = 0; i < ARRAY_SIZE(cns3xxx_pcie); i++) {
......
arch/arm/mach-mxs/Kconfig 0 → 100644
View file @ 1fef8917
if ARCH_MXS
source "arch/arm/mach-mxs/devices/Kconfig"
config SOC_IMX23
bool
select CPU_ARM926T
config SOC_IMX28
bool
select CPU_ARM926T
comment "MXS platforms:"
config MACH_MX23EVK
bool "Support MX23EVK Platform"
select SOC_IMX23
select MXS_HAVE_PLATFORM_DUART
default y
help
Include support for MX23EVK platform. This includes specific
configurations for the board and its peripherals.
config MACH_MX28EVK
bool "Support MX28EVK Platform"
select SOC_IMX28
select MXS_HAVE_PLATFORM_DUART
select MXS_HAVE_PLATFORM_FEC
default y
help
Include support for MX28EVK platform. This includes specific
configurations for the board and its peripherals.
endif
arch/arm/mach-mxs/Makefile 0 → 100644
View file @ 1fef8917
# Common support
obj-y := clock.o devices.o gpio.o icoll.o iomux.o system.o timer.o
obj-$(CONFIG_SOC_IMX23) += clock-mx23.o mm-mx23.o
obj-$(CONFIG_SOC_IMX28) += clock-mx28.o mm-mx28.o
obj-$(CONFIG_MACH_MX23EVK) += mach-mx23evk.o
obj-$(CONFIG_MACH_MX28EVK) += mach-mx28evk.o
obj-y += devices/
arch/arm/mach-mxs/Makefile.boot 0 → 100644
View file @ 1fef8917
zreladdr-y := 0x40008000
arch/arm/mach-mxs/clock-mx23.c 0 → 100644
View file @ 1fef8917
This diff is collapsed.
arch/arm/mach-mxs/clock-mx28.c 0 → 100644
View file @ 1fef8917
This diff is collapsed.
arch/arm/mach-mxs/clock.c 0 → 100644
View file @ 1fef8917
/*
* Based on arch/arm/plat-omap/clock.c
*
* Copyright (C) 2004 - 2005 Nokia corporation
* Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
* Modified for omap shared clock framework by Tony Lindgren <tony@atomide.com>
* Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved.
* Copyright 2008 Juergen Beisert, kernel@pengutronix.de
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
* MA 02110-1301, USA.
*/
/* #define DEBUG */
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/platform_device.h>
#include <linux/proc_fs.h>
#include <linux/semaphore.h>
#include <linux/string.h>
#include <mach/clock.h>
static LIST_HEAD(clocks);
static DEFINE_MUTEX(clocks_mutex);
/*-------------------------------------------------------------------------
* Standard clock functions defined in include/linux/clk.h
*-------------------------------------------------------------------------*/
static void __clk_disable(struct clk *clk)
{
if (clk == NULL || IS_ERR(clk))
return;
WARN_ON(!clk->usecount);
if (!(--clk->usecount)) {
if (clk->disable)
clk->disable(clk);
__clk_disable(clk->parent);
__clk_disable(clk->secondary);
}
}
static int __clk_enable(struct clk *clk)
{
if (clk == NULL || IS_ERR(clk))
return -EINVAL;
if (clk->usecount++ == 0) {
__clk_enable(clk->parent);
__clk_enable(clk->secondary);
if (clk->enable)
clk->enable(clk);
}
return 0;
}
/* This function increments the reference count on the clock and enables the
* clock if not already enabled. The parent clock tree is recursively enabled
*/
int clk_enable(struct clk *clk)
{
int ret = 0;
if (clk == NULL || IS_ERR(clk))
return -EINVAL;
mutex_lock(&clocks_mutex);
ret = __clk_enable(clk);
mutex_unlock(&clocks_mutex);
return ret;
}
EXPORT_SYMBOL(clk_enable);
/* This function decrements the reference count on the clock and disables
* the clock when reference count is 0. The parent clock tree is
* recursively disabled
*/
void clk_disable(struct clk *clk)
{
if (clk == NULL || IS_ERR(clk))
return;
mutex_lock(&clocks_mutex);
__clk_disable(clk);
mutex_unlock(&clocks_mutex);
}
EXPORT_SYMBOL(clk_disable);
/* Retrieve the *current* clock rate. If the clock itself
* does not provide a special calculation routine, ask
* its parent and so on, until one is able to return
* a valid clock rate
*/
unsigned long clk_get_rate(struct clk *clk)
{
if (clk == NULL || IS_ERR(clk))
return 0UL;
if (clk->get_rate)
return clk->get_rate(clk);
return clk_get_rate(clk->parent);
}
EXPORT_SYMBOL(clk_get_rate);
/* Round the requested clock rate to the nearest supported
* rate that is less than or equal to the requested rate.
* This is dependent on the clock's current parent.
*/
long clk_round_rate(struct clk *clk, unsigned long rate)
{
if (clk == NULL || IS_ERR(clk) || !clk->round_rate)
return 0;
return clk->round_rate(clk, rate);
}
EXPORT_SYMBOL(clk_round_rate);
/* Set the clock to the requested clock rate. The rate must
* match a supported rate exactly based on what clk_round_rate returns
*/
int clk_set_rate(struct clk *clk, unsigned long rate)
{
int ret = -EINVAL;
if (clk == NULL || IS_ERR(clk) || clk->set_rate == NULL || rate == 0)
return ret;
mutex_lock(&clocks_mutex);
ret = clk->set_rate(clk, rate);
mutex_unlock(&clocks_mutex);
return ret;
}
EXPORT_SYMBOL(clk_set_rate);
/* Set the clock's parent to another clock source */
int clk_set_parent(struct clk *clk, struct clk *parent)
{
int ret = -EINVAL;
struct clk *old;
if (clk == NULL || IS_ERR(clk) || parent == NULL ||
IS_ERR(parent) || clk->set_parent == NULL)
return ret;
if (clk->usecount)
clk_enable(parent);
mutex_lock(&clocks_mutex);
ret = clk->set_parent(clk, parent);
if (ret == 0) {
old = clk->parent;
clk->parent = parent;
} else {
old = parent;
}
mutex_unlock(&clocks_mutex);
if (clk->usecount)
clk_disable(old);
return ret;
}
EXPORT_SYMBOL(clk_set_parent);
/* Retrieve the clock's parent clock source */
struct clk *clk_get_parent(struct clk *clk)
{
struct clk *ret = NULL;
if (clk == NULL || IS_ERR(clk))
return ret;
return clk->parent;
}
EXPORT_SYMBOL(clk_get_parent);
arch/arm/mach-mxs/devices-mx23.h 0 → 100644
View file @ 1fef8917
/*
* Copyright (C) 2010 Pengutronix
* Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
*
* Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify it under
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
#include <mach/mx23.h>
#include <mach/devices-common.h>
extern const struct mxs_duart_data mx23_duart_data __initconst;
#define mx23_add_duart() \
mxs_add_duart(&mx23_duart_data)
arch/arm/mach-mxs/devices-mx28.h 0 → 100644
View file @ 1fef8917
/*
* Copyright (C) 2010 Pengutronix
* Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
*
* Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify it under
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
#include <mach/mx28.h>
#include <mach/devices-common.h>
extern const struct mxs_duart_data mx28_duart_data __initconst;
#define mx28_add_duart() \
mxs_add_duart(&mx28_duart_data)
extern const struct mxs_fec_data mx28_fec_data[] __initconst;
#define mx28_add_fec(id, pdata) \
mxs_add_fec(&mx28_fec_data[id], pdata)
arch/arm/mach-mxs/devices.c 0 → 100644
View file @ 1fef8917
/*
* Copyright 2008 Sascha Hauer, kernel@pengutronix.de
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor,
* Boston, MA 02110-1301, USA.
*/
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/err.h>
#include <linux/platform_device.h>
#include <mach/common.h>
struct platform_device *__init mxs_add_platform_device_dmamask(
const char *name, int id,
const struct resource *res, unsigned int num_resources,
const void *data, size_t size_data, u64 dmamask)
{
int ret = -ENOMEM;
struct platform_device *pdev;
pdev = platform_device_alloc(name, id);
if (!pdev)
goto err;
if (dmamask) {
/*
* This memory isn't freed when the device is put,
* I don't have a nice idea for that though. Conceptually
* dma_mask in struct device should not be a pointer.
* See http://thread.gmane.org/gmane.linux.kernel.pci/9081
*/
pdev->dev.dma_mask =
kmalloc(sizeof(*pdev->dev.dma_mask), GFP_KERNEL);
if (!pdev->dev.dma_mask)
/* ret is still -ENOMEM; */
goto err;
*pdev->dev.dma_mask = dmamask;
pdev->dev.coherent_dma_mask = dmamask;
}
if (res) {
ret = platform_device_add_resources(pdev, res, num_resources);
if (ret)
goto err;
}
if (data) {
ret = platform_device_add_data(pdev, data, size_data);
if (ret)
goto err;
}
ret = platform_device_add(pdev);
if (ret) {
err:
platform_device_put(pdev);
return ERR_PTR(ret);
}
return pdev;
}
arch/arm/mach-mxs/devices/Kconfig 0 → 100644
View file @ 1fef8917
config MXS_HAVE_PLATFORM_DUART
bool
config MXS_HAVE_PLATFORM_FEC
bool
arch/arm/mach-mxs/devices/Makefile 0 → 100644
View file @ 1fef8917
obj-$(CONFIG_MXS_HAVE_PLATFORM_DUART) += platform-duart.o
obj-$(CONFIG_MXS_HAVE_PLATFORM_FEC) += platform-fec.o
arch/arm/mach-mxs/devices/platform-duart.c 0 → 100644
View file @ 1fef8917
/*
* Copyright (C) 2009-2010 Pengutronix
* Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
*
* Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify it under
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
#include <mach/mx23.h>
#include <mach/mx28.h>
#include <mach/devices-common.h>
#define mxs_duart_data_entry(soc) \
{ \
.iobase = soc ## _DUART_BASE_ADDR, \
.irq = soc ## _INT_DUART, \
}
#ifdef CONFIG_SOC_IMX23
const struct mxs_duart_data mx23_duart_data __initconst =
mxs_duart_data_entry(MX23);
#endif
#ifdef CONFIG_SOC_IMX28
const struct mxs_duart_data mx28_duart_data __initconst =
mxs_duart_data_entry(MX28);
#endif
struct platform_device *__init mxs_add_duart(
const struct mxs_duart_data *data)
{
struct resource res[] = {
{
.start = data->iobase,
.end = data->iobase + SZ_8K - 1,
.flags = IORESOURCE_MEM,
}, {
.start = data->irq,
.end = data->irq,
.flags = IORESOURCE_IRQ,
},
};
return mxs_add_platform_device("mxs-duart", 0, res, ARRAY_SIZE(res),
NULL, 0);
}
arch/arm/mach-mxs/devices/platform-fec.c 0 → 100644
View file @ 1fef8917
/*
* Copyright (C) 2010 Pengutronix
* Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
*
* This program is free software; you can redistribute it and/or modify it under
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
#include <asm/sizes.h>
#include <mach/mx28.h>
#include <mach/devices-common.h>
#define mxs_fec_data_entry_single(soc, _id) \
{ \
.id = _id, \
.iobase = soc ## _ENET_MAC ## _id ## _BASE_ADDR, \
.irq = soc ## _INT_ENET_MAC ## _id, \
}
#define mxs_fec_data_entry(soc, _id) \
[_id] = mxs_fec_data_entry_single(soc, _id)
#ifdef CONFIG_SOC_IMX28
const struct mxs_fec_data mx28_fec_data[] __initconst = {
#define mx28_fec_data_entry(_id) \
mxs_fec_data_entry(MX28, _id)
mx28_fec_data_entry(0),
mx28_fec_data_entry(1),
};
#endif
struct platform_device *__init mxs_add_fec(
const struct mxs_fec_data *data,
const struct fec_platform_data *pdata)
{
struct resource res[] = {
{
.start = data->iobase,
.end = data->iobase + SZ_16K - 1,
.flags = IORESOURCE_MEM,
}, {
.start = data->irq,
.end = data->irq,
.flags = IORESOURCE_IRQ,
},
};
return mxs_add_platform_device("fec", data->id,
res, ARRAY_SIZE(res), pdata, sizeof(*pdata));
}
arch/arm/mach-mxs/gpio.c 0 → 100644
View file @ 1fef8917
/*
* MXC GPIO support. (c) 2008 Daniel Mack <daniel@caiaq.de>
* Copyright 2008 Juergen Beisert, kernel@pengutronix.de
*
* Based on code from Freescale,
* Copyright (C) 2004-2010 Freescale Semiconductor, Inc. All Rights Reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
* MA 02110-1301, USA.
*/
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/gpio.h>
#include <mach/mx23.h>
#include <mach/mx28.h>
#include <asm-generic/bug.h>
#include "gpio.h"
static struct mxs_gpio_port *mxs_gpio_ports;
static int gpio_table_size;
#define PINCTRL_DOUT(n) ((cpu_is_mx23() ? 0x0500 : 0x0700) + (n) * 0x10)
#define PINCTRL_DIN(n) ((cpu_is_mx23() ? 0x0600 : 0x0900) + (n) * 0x10)
#define PINCTRL_DOE(n) ((cpu_is_mx23() ? 0x0700 : 0x0b00) + (n) * 0x10)
#define PINCTRL_PIN2IRQ(n) ((cpu_is_mx23() ? 0x0800 : 0x1000) + (n) * 0x10)
#define PINCTRL_IRQEN(n) ((cpu_is_mx23() ? 0x0900 : 0x1100) + (n) * 0x10)
#define PINCTRL_IRQLEV(n) ((cpu_is_mx23() ? 0x0a00 : 0x1200) + (n) * 0x10)
#define PINCTRL_IRQPOL(n) ((cpu_is_mx23() ? 0x0b00 : 0x1300) + (n) * 0x10)
#define PINCTRL_IRQSTAT(n) ((cpu_is_mx23() ? 0x0c00 : 0x1400) + (n) * 0x10)
#define GPIO_INT_FALL_EDGE 0x0
#define GPIO_INT_LOW_LEV 0x1
#define GPIO_INT_RISE_EDGE 0x2
#define GPIO_INT_HIGH_LEV 0x3
#define GPIO_INT_LEV_MASK (1 << 0)
#define GPIO_INT_POL_MASK (1 << 1)
/* Note: This driver assumes 32 GPIOs are handled in one register */
static void clear_gpio_irqstatus(struct mxs_gpio_port *port, u32 index)
{
__mxs_clrl(1 << index, port->base + PINCTRL_IRQSTAT(port->id));
}
static void set_gpio_irqenable(struct mxs_gpio_port *port, u32 index,
int enable)
{
if (enable) {
__mxs_setl(1 << index, port->base + PINCTRL_IRQEN(port->id));
__mxs_setl(1 << index, port->base + PINCTRL_PIN2IRQ(port->id));
} else {
__mxs_clrl(1 << index, port->base + PINCTRL_IRQEN(port->id));
}
}
static void mxs_gpio_ack_irq(u32 irq)
{
u32 gpio = irq_to_gpio(irq);
clear_gpio_irqstatus(&mxs_gpio_ports[gpio / 32], gpio & 0x1f);
}
static void mxs_gpio_mask_irq(u32 irq)
{
u32 gpio = irq_to_gpio(irq);
set_gpio_irqenable(&mxs_gpio_ports[gpio / 32], gpio & 0x1f, 0);
}
static void mxs_gpio_unmask_irq(u32 irq)
{
u32 gpio = irq_to_gpio(irq);
set_gpio_irqenable(&mxs_gpio_ports[gpio / 32], gpio & 0x1f, 1);
}
static int mxs_gpio_get(struct gpio_chip *chip, unsigned offset);
static int mxs_gpio_set_irq_type(u32 irq, u32 type)
{
u32 gpio = irq_to_gpio(irq);
u32 pin_mask = 1 << (gpio & 31);
struct mxs_gpio_port *port = &mxs_gpio_ports[gpio / 32];
void __iomem *pin_addr;
int edge;
switch (type) {
case IRQ_TYPE_EDGE_RISING:
edge = GPIO_INT_RISE_EDGE;
break;
case IRQ_TYPE_EDGE_FALLING:
edge = GPIO_INT_FALL_EDGE;
break;
case IRQ_TYPE_LEVEL_LOW:
edge = GPIO_INT_LOW_LEV;
break;
case IRQ_TYPE_LEVEL_HIGH:
edge = GPIO_INT_HIGH_LEV;
break;
default:
return -EINVAL;
}
/* set level or edge */
pin_addr = port->base + PINCTRL_IRQLEV(port->id);
if (edge & GPIO_INT_LEV_MASK)
__mxs_setl(pin_mask, pin_addr);
else
__mxs_clrl(pin_mask, pin_addr);
/* set polarity */
pin_addr = port->base + PINCTRL_IRQPOL(port->id);
if (edge & GPIO_INT_POL_MASK)
__mxs_setl(pin_mask, pin_addr);
else
__mxs_clrl(pin_mask, pin_addr);
clear_gpio_irqstatus(port, gpio & 0x1f);
return 0;
}
/* MXS has one interrupt *per* gpio port */
static void mxs_gpio_irq_handler(u32 irq, struct irq_desc *desc)
{
u32 irq_stat;
struct mxs_gpio_port *port = (struct mxs_gpio_port *)get_irq_data(irq);
u32 gpio_irq_no_base = port->virtual_irq_start;
irq_stat = __raw_readl(port->base + PINCTRL_IRQSTAT(port->id)) &
__raw_readl(port->base + PINCTRL_IRQEN(port->id));
while (irq_stat != 0) {
int irqoffset = fls(irq_stat) - 1;
generic_handle_irq(gpio_irq_no_base + irqoffset);
irq_stat &= ~(1 << irqoffset);
}
}
/*
* Set interrupt number "irq" in the GPIO as a wake-up source.
* While system is running, all registered GPIO interrupts need to have
* wake-up enabled. When system is suspended, only selected GPIO interrupts
* need to have wake-up enabled.
* @param irq interrupt source number
* @param enable enable as wake-up if equal to non-zero
* @return This function returns 0 on success.
*/
static int mxs_gpio_set_wake_irq(u32 irq, u32 enable)
{
u32 gpio = irq_to_gpio(irq);
u32 gpio_idx = gpio & 0x1f;
struct mxs_gpio_port *port = &mxs_gpio_ports[gpio / 32];
if (enable) {
if (port->irq_high && (gpio_idx >= 16))
enable_irq_wake(port->irq_high);
else
enable_irq_wake(port->irq);
} else {
if (port->irq_high && (gpio_idx >= 16))
disable_irq_wake(port->irq_high);
else
disable_irq_wake(port->irq);
}
return 0;
}
static struct irq_chip gpio_irq_chip = {
.ack = mxs_gpio_ack_irq,
.mask = mxs_gpio_mask_irq,
.unmask = mxs_gpio_unmask_irq,
.set_type = mxs_gpio_set_irq_type,
.set_wake = mxs_gpio_set_wake_irq,
};
static void mxs_set_gpio_direction(struct gpio_chip *chip, unsigned offset,
int dir)
{
struct mxs_gpio_port *port =
container_of(chip, struct mxs_gpio_port, chip);
void __iomem *pin_addr = port->base + PINCTRL_DOE(port->id);
if (dir)
__mxs_setl(1 << offset, pin_addr);
else
__mxs_clrl(1 << offset, pin_addr);
}
static int mxs_gpio_get(struct gpio_chip *chip, unsigned offset)
{
struct mxs_gpio_port *port =
container_of(chip, struct mxs_gpio_port, chip);
return (__raw_readl(port->base + PINCTRL_DIN(port->id)) >> offset) & 1;
}
static void mxs_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
{
struct mxs_gpio_port *port =
container_of(chip, struct mxs_gpio_port, chip);
void __iomem *pin_addr = port->base + PINCTRL_DOUT(port->id);
if (value)
__mxs_setl(1 << offset, pin_addr);
else
__mxs_clrl(1 << offset, pin_addr);
}
static int mxs_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
{
struct mxs_gpio_port *port =
container_of(chip, struct mxs_gpio_port, chip);
return port->virtual_irq_start + offset;
}
static int mxs_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
{
mxs_set_gpio_direction(chip, offset, 0);
return 0;
}
static int mxs_gpio_direction_output(struct gpio_chip *chip,
unsigned offset, int value)
{
mxs_gpio_set(chip, offset, value);
mxs_set_gpio_direction(chip, offset, 1);
return 0;
}
int __init mxs_gpio_init(struct mxs_gpio_port *port, int cnt)
{
int i, j;
/* save for local usage */
mxs_gpio_ports = port;
gpio_table_size = cnt;
pr_info("MXS GPIO hardware\n");
for (i = 0; i < cnt; i++) {
/* disable the interrupt and clear the status */
__raw_writel(0, port[i].base + PINCTRL_PIN2IRQ(i));
__raw_writel(0, port[i].base + PINCTRL_IRQEN(i));
/* clear address has to be used to clear IRQSTAT bits */
__mxs_clrl(~0U, port[i].base + PINCTRL_IRQSTAT(i));
for (j = port[i].virtual_irq_start;
j < port[i].virtual_irq_start + 32; j++) {
set_irq_chip(j, &gpio_irq_chip);
set_irq_handler(j, handle_level_irq);
set_irq_flags(j, IRQF_VALID);
}
/* setup one handler for each entry */
set_irq_chained_handler(port[i].irq, mxs_gpio_irq_handler);
set_irq_data(port[i].irq, &port[i]);
/* register gpio chip */
port[i].chip.direction_input = mxs_gpio_direction_input;
port[i].chip.direction_output = mxs_gpio_direction_output;
port[i].chip.get = mxs_gpio_get;
port[i].chip.set = mxs_gpio_set;
port[i].chip.to_irq = mxs_gpio_to_irq;
port[i].chip.base = i * 32;
port[i].chip.ngpio = 32;
/* its a serious configuration bug when it fails */
BUG_ON(gpiochip_add(&port[i].chip) < 0);
}
return 0;
}
#define DEFINE_MXS_GPIO_PORT(soc, _id) \
{ \
.chip.label = "gpio-" #_id, \
.id = _id, \
.irq = soc ## _INT_GPIO ## _id, \
.base = soc ## _IO_ADDRESS( \
soc ## _PINCTRL ## _BASE_ADDR), \
.virtual_irq_start = MXS_GPIO_IRQ_START + (_id) * 32, \
}
#define DEFINE_REGISTER_FUNCTION(prefix) \
int __init prefix ## _register_gpios(void) \
{ \
return mxs_gpio_init(prefix ## _gpio_ports, \
ARRAY_SIZE(prefix ## _gpio_ports)); \
}
#ifdef CONFIG_SOC_IMX23
static struct mxs_gpio_port mx23_gpio_ports[] = {
DEFINE_MXS_GPIO_PORT(MX23, 0),
DEFINE_MXS_GPIO_PORT(MX23, 1),
DEFINE_MXS_GPIO_PORT(MX23, 2),
};
DEFINE_REGISTER_FUNCTION(mx23)
#endif
#ifdef CONFIG_SOC_IMX28
static struct mxs_gpio_port mx28_gpio_ports[] = {
DEFINE_MXS_GPIO_PORT(MX28, 0),
DEFINE_MXS_GPIO_PORT(MX28, 1),
DEFINE_MXS_GPIO_PORT(MX28, 2),
DEFINE_MXS_GPIO_PORT(MX28, 3),
DEFINE_MXS_GPIO_PORT(MX28, 4),
};
DEFINE_REGISTER_FUNCTION(mx28)
#endif
arch/arm/mach-mxs/gpio.h 0 → 100644
View file @ 1fef8917
/*
* Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved.
* Copyright 2008 Juergen Beisert, kernel@pengutronix.de
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
* MA 02110-1301, USA.
*/
#ifndef __MXS_GPIO_H__
#define __MXS_GPIO_H__
struct mxs_gpio_port {
void __iomem *base;
int id;
int irq;
int irq_high;
int virtual_irq_start;
struct gpio_chip chip;
};
int mxs_gpio_init(struct mxs_gpio_port*, int);
#endif /* __MXS_GPIO_H__ */
arch/arm/mach-mxs/icoll.c 0 → 100644
View file @ 1fef8917
/*
* Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <mach/mxs.h>
#include <mach/common.h>
#define HW_ICOLL_VECTOR 0x0000
#define HW_ICOLL_LEVELACK 0x0010
#define HW_ICOLL_CTRL 0x0020
#define HW_ICOLL_INTERRUPTn_SET(n) (0x0124 + (n) * 0x10)
#define HW_ICOLL_INTERRUPTn_CLR(n) (0x0128 + (n) * 0x10)
#define BM_ICOLL_INTERRUPTn_ENABLE 0x00000004
#define BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0 0x1
static void __iomem *icoll_base = MXS_IO_ADDRESS(MXS_ICOLL_BASE_ADDR);
static void icoll_ack_irq(unsigned int irq)
{
/*
* The Interrupt Collector is able to prioritize irqs.
* Currently only level 0 is used. So acking can use
* BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0 unconditionally.
*/
__raw_writel(BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0,
icoll_base + HW_ICOLL_LEVELACK);
}
static void icoll_mask_irq(unsigned int irq)
{
__raw_writel(BM_ICOLL_INTERRUPTn_ENABLE,
icoll_base + HW_ICOLL_INTERRUPTn_CLR(irq));
}
static void icoll_unmask_irq(unsigned int irq)
{
__raw_writel(BM_ICOLL_INTERRUPTn_ENABLE,
icoll_base + HW_ICOLL_INTERRUPTn_SET(irq));
}
static struct irq_chip mxs_icoll_chip = {
.ack = icoll_ack_irq,
.mask = icoll_mask_irq,
.unmask = icoll_unmask_irq,
};
void __init icoll_init_irq(void)
{
int i;
/*
* Interrupt Collector reset, which initializes the priority
* for each irq to level 0.
*/
mxs_reset_block(icoll_base + HW_ICOLL_CTRL);
for (i = 0; i < MXS_INTERNAL_IRQS; i++) {
set_irq_chip(i, &mxs_icoll_chip);
set_irq_handler(i, handle_level_irq);
set_irq_flags(i, IRQF_VALID);
}
}
arch/arm/mach-mxs/include/mach/clkdev.h 0 → 100644
View file @ 1fef8917
#ifndef __MACH_MXS_CLKDEV_H__
#define __MACH_MXS_CLKDEV_H__
#define __clk_get(clk) ({ 1; })
#define __clk_put(clk) do { } while (0)
#endif
arch/arm/mach-mxs/include/mach/clock.h 0 → 100644
View file @ 1fef8917
/*
* Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
* Copyright 2008 Juergen Beisert, kernel@pengutronix.de
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
* MA 02110-1301, USA.
*/
#ifndef __MACH_MXS_CLOCK_H__
#define __MACH_MXS_CLOCK_H__
#ifndef __ASSEMBLY__
#include <linux/list.h>
struct module;
struct clk {
int id;
/* Source clock this clk depends on */
struct clk *parent;
/* Secondary clock to enable/disable with this clock */
struct clk *secondary;
/* Reference count of clock enable/disable */
__s8 usecount;
/* Register bit position for clock's enable/disable control. */
u8 enable_shift;
/* Register address for clock's enable/disable control. */
void __iomem *enable_reg;
u32 flags;
/* get the current clock rate (always a fresh value) */
unsigned long (*get_rate) (struct clk *);
/* Function ptr to set the clock to a new rate. The rate must match a
supported rate returned from round_rate. Leave blank if clock is not
programmable */
int (*set_rate) (struct clk *, unsigned long);
/* Function ptr to round the requested clock rate to the nearest
supported rate that is less than or equal to the requested rate. */
unsigned long (*round_rate) (struct clk *, unsigned long);
/* Function ptr to enable the clock. Leave blank if clock can not
be gated. */
int (*enable) (struct clk *);
/* Function ptr to disable the clock. Leave blank if clock can not
be gated. */
void (*disable) (struct clk *);
/* Function ptr to set the parent clock of the clock. */
int (*set_parent) (struct clk *, struct clk *);
};
int clk_register(struct clk *clk);
void clk_unregister(struct clk *clk);
#endif /* __ASSEMBLY__ */
#endif /* __MACH_MXS_CLOCK_H__ */
arch/arm/mach-mxs/include/mach/common.h 0 → 100644
View file @ 1fef8917
/*
* Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
*/
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __MACH_MXS_COMMON_H__
#define __MACH_MXS_COMMON_H__
struct clk;
extern int mxs_reset_block(void __iomem *);
extern void mxs_timer_init(struct clk *, int);
extern int mx23_register_gpios(void);
extern int mx23_clocks_init(void);
extern void mx23_map_io(void);
extern void mx23_init_irq(void);
extern int mx28_register_gpios(void);
extern int mx28_clocks_init(void);
extern void mx28_map_io(void);
extern void mx28_init_irq(void);
extern void icoll_init_irq(void);
#endif /* __MACH_MXS_COMMON_H__ */
arch/arm/mach-mxs/include/mach/debug-macro.S 0 → 100644
View file @ 1fef8917
/* arch/arm/mach-mxs/include/mach/debug-macro.S
*
* Debugging macro include header
*
* Copyright (C) 1994-1999 Russell King
* Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <mach/mx23.h>
#include <mach/mx28.h>
#ifdef CONFIG_SOC_IMX23
#ifdef UART_PADDR
#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
#endif
#define UART_PADDR MX23_DUART_BASE_ADDR
#endif
#ifdef CONFIG_SOC_IMX28
#ifdef UART_PADDR
#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
#endif
#define UART_PADDR MX28_DUART_BASE_ADDR
#endif
#define UART_VADDR MXS_IO_ADDRESS(UART_PADDR)
.macro addruart, rp, rv
ldr \rp, =UART_PADDR @ physical
ldr \rv, =UART_VADDR @ virtual
.endm
#include <asm/hardware/debug-pl01x.S>
arch/arm/mach-mxs/include/mach/devices-common.h 0 → 100644
View file @ 1fef8917
/*
* Copyright (C) 2009-2010 Pengutronix
* Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
*
* This program is free software; you can redistribute it and/or modify it under
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/init.h>
struct platform_device *mxs_add_platform_device_dmamask(
const char *name, int id,
const struct resource *res, unsigned int num_resources,
const void *data, size_t size_data, u64 dmamask);
static inline struct platform_device *mxs_add_platform_device(
const char *name, int id,
const struct resource *res, unsigned int num_resources,
const void *data, size_t size_data)
{
return mxs_add_platform_device_dmamask(
name, id, res, num_resources, data, size_data, 0);
}
/* duart */
struct mxs_duart_data {
resource_size_t iobase;
resource_size_t iosize;
resource_size_t irq;
};
struct platform_device *__init mxs_add_duart(
const struct mxs_duart_data *data);
/* fec */
#include <linux/fec.h>
struct mxs_fec_data {
int id;
resource_size_t iobase;
resource_size_t iosize;
resource_size_t irq;
};
struct platform_device *__init mxs_add_fec(
const struct mxs_fec_data *data,
const struct fec_platform_data *pdata);
arch/arm/mach-mxs/include/mach/entry-macro.S 0 → 100644
View file @ 1fef8917
/*
* Low-level IRQ helper macros for Freescale MXS-based
*
* Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*/
#include <mach/mxs.h>
#define MXS_ICOLL_VBASE MXS_IO_ADDRESS(MXS_ICOLL_BASE_ADDR)
#define HW_ICOLL_STAT_OFFSET 0x70
.macro disable_fiq
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldr \irqnr, [\base, #HW_ICOLL_STAT_OFFSET]
cmp \irqnr, #0x7F
strne \irqnr, [\base]
moveqs \irqnr, #0
.endm
.macro get_irqnr_preamble, base, tmp
ldr \base, =MXS_ICOLL_VBASE
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
arch/arm/mach-mxs/include/mach/gpio.h 0 → 100644
View file @ 1fef8917
/*
* Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved.
* Copyright 2008 Juergen Beisert, kernel@pengutronix.de
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
* MA 02110-1301, USA.
*/
#ifndef __MACH_MXS_GPIO_H__
#define __MACH_MXS_GPIO_H__
#include <asm-generic/gpio.h>
#define MXS_GPIO_NR(bank, nr) ((bank) * 32 + (nr))
/* use gpiolib dispatchers */
#define gpio_get_value __gpio_get_value
#define gpio_set_value __gpio_set_value
#define gpio_cansleep __gpio_cansleep
#define gpio_to_irq __gpio_to_irq
#define irq_to_gpio(irq) ((irq) - MXS_GPIO_IRQ_START)
#endif /* __MACH_MXS_GPIO_H__ */
arch/arm/mach-mxs/include/mach/hardware.h 0 → 100644
View file @ 1fef8917
/*
* Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
* Copyright 2008 Juergen Beisert, kernel@pengutronix.de
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
* MA 02110-1301, USA.
*/
#ifndef __MACH_MXS_HARDWARE_H__
#define __MACH_MXS_HARDWARE_H__
#ifdef __ASSEMBLER__
#define IOMEM(addr) (addr)
#else
#define IOMEM(addr) ((void __force __iomem *)(addr))
#endif
#endif /* __MACH_MXS_HARDWARE_H__ */
arch/arm/mach-mxs/include/mach/io.h 0 → 100644
View file @ 1fef8917
/*
* Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
*/
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __MACH_MXS_IO_H__
#define __MACH_MXS_IO_H__
/* Allow IO space to be anywhere in the memory */
#define IO_SPACE_LIMIT 0xffffffff
/* io address mapping macro */
#define __io(a) __typesafe_io(a)
#define __mem_pci(a) (a)
#endif /* __MACH_MXS_IO_H__ */
arch/arm/mach-mxs/include/mach/iomux-mx23.h 0 → 100644
View file @ 1fef8917
This diff is collapsed.
arch/arm/mach-mxs/include/mach/iomux-mx28.h 0 → 100644
View file @ 1fef8917
This diff is collapsed.
arch/arm/mach-mxs/include/mach/iomux.h 0 → 100644
View file @ 1fef8917
/*
* Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH,
* <armlinux@phytec.de>
* Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
* MA 02110-1301, USA.
*/
#ifndef __MACH_MXS_IOMUX_H__
#define __MACH_MXS_IOMUX_H__
/*
* IOMUX/PAD Bit field definitions
*
* PAD_BANK: 0..2 (3)
* PAD_PIN: 3..7 (5)
* PAD_MUXSEL: 8..9 (2)
* PAD_MA: 10..11 (2)
* PAD_MA_VALID: 12 (1)
* PAD_VOL: 13 (1)
* PAD_VOL_VALID: 14 (1)
* PAD_PULL: 15 (1)
* PAD_PULL_VALID: 16 (1)
* RESERVED: 17..31 (15)
*/
typedef u32 iomux_cfg_t;
#define MXS_PAD_BANK_SHIFT 0
#define MXS_PAD_BANK_MASK ((iomux_cfg_t)0x7 << MXS_PAD_BANK_SHIFT)
#define MXS_PAD_PIN_SHIFT 3
#define MXS_PAD_PIN_MASK ((iomux_cfg_t)0x1f << MXS_PAD_PIN_SHIFT)
#define MXS_PAD_MUXSEL_SHIFT 8
#define MXS_PAD_MUXSEL_MASK ((iomux_cfg_t)0x3 << MXS_PAD_MUXSEL_SHIFT)
#define MXS_PAD_MA_SHIFT 10
#define MXS_PAD_MA_MASK ((iomux_cfg_t)0x3 << MXS_PAD_MA_SHIFT)
#define MXS_PAD_MA_VALID_SHIFT 12
#define MXS_PAD_MA_VALID_MASK ((iomux_cfg_t)0x1 << MXS_PAD_MA_VALID_SHIFT)
#define MXS_PAD_VOL_SHIFT 13
#define MXS_PAD_VOL_MASK ((iomux_cfg_t)0x1 << MXS_PAD_VOL_SHIFT)
#define MXS_PAD_VOL_VALID_SHIFT 14
#define MXS_PAD_VOL_VALID_MASK ((iomux_cfg_t)0x1 << MXS_PAD_VOL_VALID_SHIFT)
#define MXS_PAD_PULL_SHIFT 15
#define MXS_PAD_PULL_MASK ((iomux_cfg_t)0x1 << MXS_PAD_PULL_SHIFT)
#define MXS_PAD_PULL_VALID_SHIFT 16
#define MXS_PAD_PULL_VALID_MASK ((iomux_cfg_t)0x1 << MXS_PAD_PULL_VALID_SHIFT)
#define PAD_MUXSEL_0 0
#define PAD_MUXSEL_1 1
#define PAD_MUXSEL_2 2
#define PAD_MUXSEL_GPIO 3
#define PAD_4MA 0
#define PAD_8MA 1
#define PAD_12MA 2
#define PAD_16MA 3
#define PAD_1V8 0
#define PAD_3V3 1
#define PAD_NOPULL 0
#define PAD_PULLUP 1
#define MXS_PAD_4MA ((PAD_4MA << MXS_PAD_MA_SHIFT) | \
MXS_PAD_MA_VALID_MASK)
#define MXS_PAD_8MA ((PAD_8MA << MXS_PAD_MA_SHIFT) | \
MXS_PAD_MA_VALID_MASK)
#define MXS_PAD_12MA ((PAD_12MA << MXS_PAD_MA_SHIFT) | \
MXS_PAD_MA_VALID_MASK)
#define MXS_PAD_16MA ((PAD_16MA << MXS_PAD_MA_SHIFT) | \
MXS_PAD_MA_VALID_MASK)
#define MXS_PAD_1V8 ((PAD_1V8 << MXS_PAD_VOL_SHIFT) | \
MXS_PAD_VOL_VALID_MASK)
#define MXS_PAD_3V3 ((PAD_3V3 << MXS_PAD_VOL_SHIFT) | \
MXS_PAD_VOL_VALID_MASK)
#define MXS_PAD_NOPULL ((PAD_NOPULL << MXS_PAD_PULL_SHIFT) | \
MXS_PAD_PULL_VALID_MASK)
#define MXS_PAD_PULLUP ((PAD_PULLUP << MXS_PAD_PULL_SHIFT) | \
MXS_PAD_PULL_VALID_MASK)
#define MXS_IOMUX_PAD(_bank, _pin, _muxsel, _ma, _vol, _pull) \
(((iomux_cfg_t)(_bank) << MXS_PAD_BANK_SHIFT) | \
((iomux_cfg_t)(_pin) << MXS_PAD_PIN_SHIFT) | \
((iomux_cfg_t)(_muxsel) << MXS_PAD_MUXSEL_SHIFT) | \
((iomux_cfg_t)(_ma) << MXS_PAD_MA_SHIFT) | \
((iomux_cfg_t)(_vol) << MXS_PAD_VOL_SHIFT) | \
((iomux_cfg_t)(_pull) << MXS_PAD_PULL_SHIFT))
/*
* A pad becomes naked, when none of mA, vol or pull
* validity bits is set.
*/
#define MXS_IOMUX_PAD_NAKED(_bank, _pin, _muxsel) \
MXS_IOMUX_PAD(_bank, _pin, _muxsel, 0, 0, 0)
static inline unsigned int PAD_BANK(iomux_cfg_t pad)
{
return (pad & MXS_PAD_BANK_MASK) >> MXS_PAD_BANK_SHIFT;
}
static inline unsigned int PAD_PIN(iomux_cfg_t pad)
{
return (pad & MXS_PAD_PIN_MASK) >> MXS_PAD_PIN_SHIFT;
}
static inline unsigned int PAD_MUXSEL(iomux_cfg_t pad)
{
return (pad & MXS_PAD_MUXSEL_MASK) >> MXS_PAD_MUXSEL_SHIFT;
}
static inline unsigned int PAD_MA(iomux_cfg_t pad)
{
return (pad & MXS_PAD_MA_MASK) >> MXS_PAD_MA_SHIFT;
}
static inline unsigned int PAD_MA_VALID(iomux_cfg_t pad)
{
return (pad & MXS_PAD_MA_VALID_MASK) >> MXS_PAD_MA_VALID_SHIFT;
}
static inline unsigned int PAD_VOL(iomux_cfg_t pad)
{
return (pad & MXS_PAD_VOL_MASK) >> MXS_PAD_VOL_SHIFT;
}
static inline unsigned int PAD_VOL_VALID(iomux_cfg_t pad)
{
return (pad & MXS_PAD_VOL_VALID_MASK) >> MXS_PAD_VOL_VALID_SHIFT;
}
static inline unsigned int PAD_PULL(iomux_cfg_t pad)
{
return (pad & MXS_PAD_PULL_MASK) >> MXS_PAD_PULL_SHIFT;
}
static inline unsigned int PAD_PULL_VALID(iomux_cfg_t pad)
{
return (pad & MXS_PAD_PULL_VALID_MASK) >> MXS_PAD_PULL_VALID_SHIFT;
}
/*
* configures a single pad in the iomuxer
*/
int mxs_iomux_setup_pad(iomux_cfg_t pad);
/*
* configures multiple pads
* convenient way to call the above function with tables
*/
int mxs_iomux_setup_multiple_pads(const iomux_cfg_t *pad_list, unsigned count);
#endif /* __MACH_MXS_IOMUX_H__*/
arch/arm/mach-mxs/include/mach/irqs.h 0 → 100644
View file @ 1fef8917
/*
* Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
*/
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __MACH_MXS_IRQS_H__
#define __MACH_MXS_IRQS_H__
#define MXS_INTERNAL_IRQS 128
#define MXS_GPIO_IRQ_START MXS_INTERNAL_IRQS
/* the maximum for MXS-based */
#define MXS_GPIO_IRQS (32 * 5)
/*
* The next 16 interrupts are for board specific purposes. Since
* the kernel can only run on one machine at a time, we can re-use
* these. If you need more, increase MXS_BOARD_IRQS, but keep it
* within sensible limits.
*/
#define MXS_BOARD_IRQ_START (MXS_GPIO_IRQ_START + MXS_GPIO_IRQS)
#define MXS_BOARD_IRQS 16
#define NR_IRQS (MXS_BOARD_IRQ_START + MXS_BOARD_IRQS)
#endif /* __MACH_MXS_IRQS_H__ */
arch/arm/mach-mxs/include/mach/memory.h 0 → 100644
View file @ 1fef8917
This diff is collapsed.
arch/arm/mach-mxs/include/mach/mx23.h 0 → 100644
View file @ 1fef8917
This diff is collapsed.
arch/arm/mach-mxs/include/mach/mx28.h 0 → 100644
View file @ 1fef8917
This diff is collapsed.
arch/arm/mach-mxs/include/mach/mxs.h 0 → 100644
View file @ 1fef8917
This diff is collapsed.
arch/arm/mach-mxs/include/mach/system.h 0 → 100644
View file @ 1fef8917
This diff is collapsed.
arch/arm/mach-mxs/include/mach/timex.h 0 → 100644
View file @ 1fef8917
This diff is collapsed.
arch/arm/mach-mxs/include/mach/uncompress.h 0 → 100644
View file @ 1fef8917
This diff is collapsed.
arch/arm/mach-mxs/include/mach/vmalloc.h 0 → 100644
View file @ 1fef8917
This diff is collapsed.
arch/arm/mach-mxs/iomux.c 0 → 100644
View file @ 1fef8917
This diff is collapsed.
arch/arm/mach-mxs/mach-mx23evk.c 0 → 100644
View file @ 1fef8917
This diff is collapsed.
arch/arm/mach-mxs/mach-mx28evk.c 0 → 100644
View file @ 1fef8917
This diff is collapsed.
arch/arm/mach-mxs/mm-mx23.c 0 → 100644
View file @ 1fef8917
This diff is collapsed.
arch/arm/mach-mxs/mm-mx28.c 0 → 100644
View file @ 1fef8917
This diff is collapsed.
arch/arm/mach-mxs/regs-clkctrl-mx23.h 0 → 100644
View file @ 1fef8917
This diff is collapsed.
arch/arm/mach-mxs/regs-clkctrl-mx28.h 0 → 100644
View file @ 1fef8917
This diff is collapsed.
arch/arm/mach-mxs/system.c 0 → 100644
View file @ 1fef8917
This diff is collapsed.
arch/arm/mach-mxs/timer.c 0 → 100644
View file @ 1fef8917
This diff is collapsed.
arch/arm/mach-realview/headsmp.S
View file @ 1fef8917
......@@ -35,5 +35,6 @@ pen: ldr r7, [r6]
*/
b secondary_startup
.align
1: .long .
.long pen_release
arch/arm/mach-tegra/include/mach/debug-macro.S
View file @ 1fef8917
......@@ -21,8 +21,8 @@
#include <mach/io.h>
.macro addruart, rp, rv
ldreq \rp, =IO_APB_PHYS @ physical
ldrne \rv, =IO_APB_VIRT @ virtual
ldr \rp, =IO_APB_PHYS @ physical
ldr \rv, =IO_APB_VIRT @ virtual
#if defined(CONFIG_TEGRA_DEBUG_UART_NONE)
#error "A debug UART must be selected in the kernel config to use DEBUG_LL"
#elif defined(CONFIG_TEGRA_DEBUG_UARTA)
......
arch/arm/mach-vexpress/headsmp.S
View file @ 1fef8917
This diff is collapsed.
arch/arm/mm/proc-v7.S
View file @ 1fef8917
This diff is collapsed.
arch/arm/plat-iop/time.c
View file @ 1fef8917
This diff is collapsed.
arch/arm/vfp/vfphw.S
View file @ 1fef8917
This diff is collapsed.
arch/mn10300/include/asm/syscall.h 0 → 100644
View file @ 1fef8917
This diff is collapsed.
arch/parisc/kernel/irq.c
View file @ 1fef8917
This diff is collapsed.
arch/parisc/kernel/signal.c
View file @ 1fef8917
This diff is collapsed.
arch/s390/kernel/vtime.c
View file @ 1fef8917
This diff is collapsed.
arch/sh/boards/mach-ecovec24/setup.c
View file @ 1fef8917
This diff is collapsed.
arch/sh/boards/mach-se/7724/setup.c
View file @ 1fef8917
This diff is collapsed.
arch/sh/include/asm/cacheflush.h
View file @ 1fef8917
This diff is collapsed.
arch/sh/include/cpu-sh4/cpu/sh7724.h
View file @ 1fef8917
This diff is collapsed.
arch/sh/kernel/cpu/sh4a/clock-sh7724.c
View file @ 1fef8917
This diff is collapsed.
arch/sh/mm/cache-sh4.c
View file @ 1fef8917
This diff is collapsed.
arch/sh/mm/cache-sh7705.c
View file @ 1fef8917
This diff is collapsed.
arch/sh/mm/cache.c
View file @ 1fef8917
This diff is collapsed.
arch/sh/mm/kmap.c
View file @ 1fef8917
This diff is collapsed.
arch/x86/pci/xen.c
View file @ 1fef8917
This diff is collapsed.
arch/x86/xen/enlighten.c
View file @ 1fef8917
This diff is collapsed.
arch/x86/xen/mmu.c
View file @ 1fef8917
This diff is collapsed.
arch/x86/xen/platform-pci-unplug.c
View file @ 1fef8917
This diff is collapsed.
arch/x86/xen/setup.c
View file @ 1fef8917
This diff is collapsed.
arch/x86/xen/suspend.c
View file @ 1fef8917
This diff is collapsed.
arch/x86/xen/xen-ops.h
View file @ 1fef8917
This diff is collapsed.
drivers/block/rbd.c
View file @ 1fef8917
This diff is collapsed.
drivers/dma/shdma.c
View file @ 1fef8917
This diff is collapsed.
drivers/gpio/cs5535-gpio.c
View file @ 1fef8917
This diff is collapsed.
drivers/gpu/drm/drm_crtc_helper.c
View file @ 1fef8917
This diff is collapsed.
drivers/gpu/drm/i915/i915_gem.c
View file @ 1fef8917
This diff is collapsed.
drivers/gpu/drm/i915/i915_suspend.c
View file @ 1fef8917
This diff is collapsed.
drivers/gpu/drm/i915/intel_display.c
View file @ 1fef8917
This diff is collapsed.
drivers/gpu/drm/i915/intel_dp.c
View file @ 1fef8917
This diff is collapsed.
drivers/gpu/drm/i915/intel_drv.h
View file @ 1fef8917
This diff is collapsed.
drivers/gpu/drm/i915/intel_lvds.c
View file @ 1fef8917
This diff is collapsed.
drivers/gpu/drm/i915/intel_sdvo.c
View file @ 1fef8917
This diff is collapsed.
drivers/gpu/drm/radeon/atom.c
View file @ 1fef8917
This diff is collapsed.
drivers/gpu/drm/radeon/r600_cs.c
View file @ 1fef8917
This diff is collapsed.
drivers/gpu/drm/radeon/r600_reg.h
View file @ 1fef8917
This diff is collapsed.
drivers/gpu/drm/radeon/radeon_atombios.c
View file @ 1fef8917
This diff is collapsed.
drivers/gpu/drm/radeon/radeon_bios.c
View file @ 1fef8917
This diff is collapsed.
drivers/gpu/drm/radeon/radeon_combios.c
View file @ 1fef8917
This diff is collapsed.
drivers/gpu/drm/radeon/radeon_connectors.c
View file @ 1fef8917
This diff is collapsed.
drivers/hid/hid-core.c
View file @ 1fef8917
This diff is collapsed.
drivers/hid/hid-egalax.c
View file @ 1fef8917
This diff is collapsed.
drivers/hid/hid-input.c
View file @ 1fef8917
This diff is collapsed.
drivers/hid/hid-tmff.c
View file @ 1fef8917
This diff is collapsed.
drivers/i2c/Kconfig
View file @ 1fef8917
This diff is collapsed.
drivers/i2c/algos/Kconfig
View file @ 1fef8917
This diff is collapsed.
drivers/infiniband/core/ud_header.c
View file @ 1fef8917
This diff is collapsed.
drivers/infiniband/core/uverbs_marshall.c
View file @ 1fef8917
This diff is collapsed.
drivers/infiniband/hw/mlx4/main.c
View file @ 1fef8917
This diff is collapsed.
drivers/infiniband/hw/mlx4/qp.c
View file @ 1fef8917
This diff is collapsed.
drivers/input/serio/gscps2.c
View file @ 1fef8917
This diff is collapsed.
drivers/leds/Kconfig
View file @ 1fef8917
This diff is collapsed.
drivers/macintosh/Kconfig
View file @ 1fef8917
This diff is collapsed.
drivers/media/common/tuners/Kconfig
View file @ 1fef8917
This diff is collapsed.
drivers/media/dvb/frontends/Kconfig
View file @ 1fef8917
This diff is collapsed.
drivers/media/radio/radio-si4713.c
View file @ 1fef8917
This diff is collapsed.
drivers/media/video/Kconfig
View file @ 1fef8917
This diff is collapsed.
drivers/media/video/au0828/au0828-cards.c
View file @ 1fef8917
This diff is collapsed.
drivers/media/video/bt8xx/bttv-cards.c
View file @ 1fef8917
This diff is collapsed.
drivers/media/video/cafe_ccic.c
View file @ 1fef8917
This diff is collapsed.
drivers/media/video/cx18/cx18-i2c.c
View file @ 1fef8917
This diff is collapsed.
drivers/media/video/cx231xx/cx231xx-cards.c
View file @ 1fef8917
This diff is collapsed.
drivers/media/video/cx23885/cx23885-cards.c
View file @ 1fef8917
This diff is collapsed.
drivers/media/video/cx23885/cx23885-video.c
View file @ 1fef8917
This diff is collapsed.
drivers/media/video/cx88/cx88-cards.c
View file @ 1fef8917
This diff is collapsed.
drivers/media/video/cx88/cx88-video.c
View file @ 1fef8917
This diff is collapsed.
drivers/media/video/davinci/vpfe_capture.c
View file @ 1fef8917
This diff is collapsed.
drivers/media/video/davinci/vpif_capture.c
View file @ 1fef8917
This diff is collapsed.
drivers/media/video/davinci/vpif_display.c
View file @ 1fef8917
This diff is collapsed.
drivers/media/video/em28xx/em28xx-cards.c
View file @ 1fef8917
This diff is collapsed.
drivers/media/video/fsl-viu.c
View file @ 1fef8917
This diff is collapsed.
drivers/media/video/ivtv/ivtv-i2c.c
View file @ 1fef8917
This diff is collapsed.
drivers/media/video/mxb.c
View file @ 1fef8917
This diff is collapsed.
drivers/media/video/pvrusb2/pvrusb2-hdw.c
View file @ 1fef8917
This diff is collapsed.
drivers/media/video/s5p-fimc/fimc-capture.c
View file @ 1fef8917
This diff is collapsed.
drivers/media/video/saa7134/saa7134-cards.c
View file @ 1fef8917
This diff is collapsed.
drivers/media/video/saa7134/saa7134-core.c
View file @ 1fef8917
This diff is collapsed.
drivers/media/video/sh_vou.c
View file @ 1fef8917
This diff is collapsed.
drivers/media/video/soc_camera.c
View file @ 1fef8917
This diff is collapsed.
drivers/media/video/v4l2-common.c
View file @ 1fef8917
This diff is collapsed.
drivers/media/video/via-camera.c
View file @ 1fef8917
This diff is collapsed.
drivers/media/video/vino.c
View file @ 1fef8917
This diff is collapsed.
drivers/media/video/zoran/zoran_card.c
View file @ 1fef8917
This diff is collapsed.
drivers/mtd/ubi/io.c
View file @ 1fef8917
This diff is collapsed.
drivers/mtd/ubi/scan.c
View file @ 1fef8917
This diff is collapsed.
drivers/net/mlx4/fw.c
View file @ 1fef8917
This diff is collapsed.
drivers/net/wan/x25_asy.c
View file @ 1fef8917
This diff is collapsed.
drivers/parisc/dino.c
View file @ 1fef8917
This diff is collapsed.
drivers/parisc/eisa.c
View file @ 1fef8917
This diff is collapsed.
drivers/parisc/gsc.c
View file @ 1fef8917
This diff is collapsed.
drivers/parisc/iosapic.c
View file @ 1fef8917
This diff is collapsed.
drivers/parisc/led.c
View file @ 1fef8917
This diff is collapsed.
drivers/parisc/superio.c
View file @ 1fef8917
This diff is collapsed.
drivers/pcmcia/soc_common.c
View file @ 1fef8917
This diff is collapsed.
drivers/platform/x86/asus-laptop.c
View file @ 1fef8917
This diff is collapsed.
drivers/platform/x86/eeepc-wmi.c
View file @ 1fef8917
This diff is collapsed.
drivers/platform/x86/hp-wmi.c
View file @ 1fef8917
This diff is collapsed.
drivers/platform/x86/ibm_rtl.c
View file @ 1fef8917
This diff is collapsed.
drivers/platform/x86/msi-wmi.c
View file @ 1fef8917
This diff is collapsed.
drivers/platform/x86/thinkpad_acpi.c
View file @ 1fef8917
This diff is collapsed.
drivers/platform/x86/toshiba_acpi.c
View file @ 1fef8917
This diff is collapsed.
drivers/platform/x86/wmi.c
View file @ 1fef8917
This diff is collapsed.
drivers/regulator/core.c
View file @ 1fef8917
This diff is collapsed.
drivers/regulator/mc13783-regulator.c
View file @ 1fef8917
This diff is collapsed.
drivers/regulator/twl-regulator.c
View file @ 1fef8917
This diff is collapsed.
drivers/s390/cio/css.c
View file @ 1fef8917
This diff is collapsed.
drivers/serial/8250.c
View file @ 1fef8917
This diff is collapsed.
drivers/serial/mfd.c
View file @ 1fef8917
This diff is collapsed.
drivers/spi/atmel_spi.c
View file @ 1fef8917
This diff is collapsed.
drivers/staging/asus_oled/asus_oled.c
View file @ 1fef8917
This diff is collapsed.
drivers/staging/batman-adv/hard-interface.c
View file @ 1fef8917
This diff is collapsed.
drivers/staging/batman-adv/soft-interface.c
View file @ 1fef8917
This diff is collapsed.
drivers/staging/brcm80211/README
View file @ 1fef8917
This diff is collapsed.
drivers/staging/brcm80211/TODO
View file @ 1fef8917
This diff is collapsed.
drivers/staging/comedi/drivers/usbdux.c
View file @ 1fef8917
This diff is collapsed.
drivers/staging/easycap/easycap.h
View file @ 1fef8917
This diff is collapsed.
drivers/staging/frontier/tranzport.c
View file @ 1fef8917
This diff is collapsed.
drivers/staging/go7007/go7007-driver.c
View file @ 1fef8917
This diff is collapsed.
drivers/staging/iio/accel/adis16220_core.c
View file @ 1fef8917
This diff is collapsed.
drivers/staging/line6/control.c
View file @ 1fef8917
This diff is collapsed.
drivers/staging/line6/midi.c
View file @ 1fef8917
This diff is collapsed.
drivers/staging/line6/pcm.c
View file @ 1fef8917
This diff is collapsed.
drivers/staging/line6/pod.c
View file @ 1fef8917
This diff is collapsed.
drivers/staging/line6/toneport.c
View file @ 1fef8917
This diff is collapsed.
drivers/staging/line6/variax.c
View file @ 1fef8917
This diff is collapsed.
drivers/staging/quickstart/quickstart.c
View file @ 1fef8917
This diff is collapsed.
drivers/staging/rt2860/usb_main_dev.c
View file @ 1fef8917
This diff is collapsed.
drivers/staging/rtl8187se/r8185b_init.c
View file @ 1fef8917
This diff is collapsed.
drivers/staging/rtl8712/usb_halinit.c
View file @ 1fef8917
This diff is collapsed.
drivers/staging/speakup/fakekey.c
View file @ 1fef8917
This diff is collapsed.
drivers/staging/spectra/ffsport.c
View file @ 1fef8917
This diff is collapsed.
drivers/staging/tm6000/tm6000-cards.c
View file @ 1fef8917
This diff is collapsed.
drivers/staging/udlfb/udlfb.c
View file @ 1fef8917
This diff is collapsed.
drivers/staging/winbond/sysdef.h
View file @ 1fef8917
This diff is collapsed.
drivers/staging/zram/zram_sysfs.c
View file @ 1fef8917
This diff is collapsed.
drivers/tty/tty_io.c
View file @ 1fef8917
This diff is collapsed.
drivers/tty/tty_ldisc.c
View file @ 1fef8917
This diff is collapsed.
drivers/uio/uio.c
View file @ 1fef8917
This diff is collapsed.
drivers/uio/uio_cif.c
View file @ 1fef8917
This diff is collapsed.
drivers/uio/uio_netx.c
View file @ 1fef8917
This diff is collapsed.
drivers/usb/core/hcd.c
View file @ 1fef8917
This diff is collapsed.
drivers/usb/host/ehci-pci.c
View file @ 1fef8917
This diff is collapsed.
drivers/usb/host/xhci-hub.c
View file @ 1fef8917
This diff is collapsed.
drivers/usb/host/xhci-mem.c
View file @ 1fef8917
This diff is collapsed.
drivers/usb/host/xhci.c
View file @ 1fef8917
This diff is collapsed.
drivers/usb/host/xhci.h
View file @ 1fef8917
This diff is collapsed.
drivers/usb/misc/yurex.c
View file @ 1fef8917
This diff is collapsed.
drivers/usb/musb/musb_core.c
View file @ 1fef8917
This diff is collapsed.
drivers/usb/musb/musb_gadget.c
View file @ 1fef8917
This diff is collapsed.
drivers/usb/serial/ftdi_sio.c
View file @ 1fef8917
This diff is collapsed.
drivers/usb/serial/ftdi_sio_ids.h
View file @ 1fef8917
This diff is collapsed.
drivers/usb/serial/usb-serial.c
View file @ 1fef8917
This diff is collapsed.
drivers/video/da8xx-fb.c
View file @ 1fef8917
This diff is collapsed.
drivers/video/fbcmap.c
View file @ 1fef8917
This diff is collapsed.
drivers/video/geode/lxfb.h
View file @ 1fef8917
This diff is collapsed.
drivers/video/geode/lxfb_ops.c
View file @ 1fef8917
This diff is collapsed.
drivers/watchdog/Kconfig
View file @ 1fef8917
This diff is collapsed.
drivers/watchdog/bcm63xx_wdt.c
View file @ 1fef8917
This diff is collapsed.
drivers/watchdog/gef_wdt.c
View file @ 1fef8917
This diff is collapsed.
drivers/watchdog/iTCO_wdt.c
View file @ 1fef8917
This diff is collapsed.
drivers/xen/balloon.c
View file @ 1fef8917
This diff is collapsed.
drivers/xen/events.c
View file @ 1fef8917
This diff is collapsed.
drivers/xen/manage.c
View file @ 1fef8917
This diff is collapsed.
fs/autofs4/root.c
View file @ 1fef8917
This diff is collapsed.
fs/cifs/Kconfig
View file @ 1fef8917
This diff is collapsed.
fs/cifs/cifsacl.c
View file @ 1fef8917
This diff is collapsed.
fs/cifs/cifsfs.c
View file @ 1fef8917
This diff is collapsed.
fs/cifs/cifsproto.h
View file @ 1fef8917
This diff is collapsed.
fs/cifs/connect.c
View file @ 1fef8917
This diff is collapsed.
fs/cifs/dns_resolve.c
View file @ 1fef8917
This diff is collapsed.
fs/cifs/file.c
View file @ 1fef8917
This diff is collapsed.
fs/cifs/fscache.c
View file @ 1fef8917
This diff is collapsed.
fs/cifs/inode.c
View file @ 1fef8917
This diff is collapsed.
fs/cifs/readdir.c
View file @ 1fef8917
This diff is collapsed.
fs/cifs/xattr.c
View file @ 1fef8917
This diff is collapsed.
fs/compat.c
View file @ 1fef8917
This diff is collapsed.
fs/exec.c
View file @ 1fef8917
This diff is collapsed.
fs/nfs/dir.c
View file @ 1fef8917
This diff is collapsed.
fs/ocfs2/cluster/heartbeat.c
View file @ 1fef8917
This diff is collapsed.
fs/ocfs2/dcache.c
View file @ 1fef8917
This diff is collapsed.
fs/ocfs2/dlm/dlmdomain.c
View file @ 1fef8917
This diff is collapsed.
fs/ocfs2/ocfs2.h
View file @ 1fef8917
This diff is collapsed.
fs/ocfs2/stack_user.c
View file @ 1fef8917
This diff is collapsed.
fs/proc/base.c
View file @ 1fef8917
This diff is collapsed.
fs/reiserfs/xattr_acl.c
View file @ 1fef8917
This diff is collapsed.
fs/xfs/linux-2.6/xfs_aops.c
View file @ 1fef8917
This diff is collapsed.
fs/xfs/linux-2.6/xfs_buf.c
View file @ 1fef8917
This diff is collapsed.
fs/xfs/xfs_bmap.c
View file @ 1fef8917
This diff is collapsed.
fs/xfs/xfs_bmap.h
View file @ 1fef8917
This diff is collapsed.
fs/xfs/xfs_dfrag.c
View file @ 1fef8917
This diff is collapsed.
fs/xfs/xfs_error.c
View file @ 1fef8917
This diff is collapsed.
fs/xfs/xfs_error.h
View file @ 1fef8917
This diff is collapsed.
fs/xfs/xfs_inode_item.c
View file @ 1fef8917
This diff is collapsed.
include/linux/binfmts.h
View file @ 1fef8917
This diff is collapsed.
include/linux/cpu.h
View file @ 1fef8917
This diff is collapsed.
include/linux/gfp.h
View file @ 1fef8917
This diff is collapsed.
include/linux/memory_hotplug.h
View file @ 1fef8917
This diff is collapsed.
include/linux/node.h
View file @ 1fef8917
This diff is collapsed.
include/linux/tty.h
View file @ 1fef8917
This diff is collapsed.
include/linux/uio_driver.h
View file @ 1fef8917
This diff is collapsed.
include/linux/usb.h
View file @ 1fef8917
This diff is collapsed.
include/linux/vmalloc.h
View file @ 1fef8917
This diff is collapsed.
include/media/v4l2-common.h
View file @ 1fef8917
This diff is collapsed.
include/xen/events.h
View file @ 1fef8917
This diff is collapsed.
include/xen/interface/physdev.h
View file @ 1fef8917
This diff is collapsed.
kernel/exit.c
View file @ 1fef8917
This diff is collapsed.
kernel/irq/proc.c
View file @ 1fef8917
This diff is collapsed.
kernel/power/hibernate.c
View file @ 1fef8917
This diff is collapsed.
kernel/power/suspend.c
View file @ 1fef8917
This diff is collapsed.
kernel/power/swap.c
View file @ 1fef8917
This diff is collapsed.
kernel/power/user.c
View file @ 1fef8917
This diff is collapsed.
mm/hugetlb.c
View file @ 1fef8917
This diff is collapsed.
mm/ksm.c
View file @ 1fef8917
This diff is collapsed.
mm/memory-failure.c
View file @ 1fef8917
This diff is collapsed.
mm/memory_hotplug.c
View file @ 1fef8917
This diff is collapsed.
mm/mempolicy.c
View file @ 1fef8917
This diff is collapsed.
mm/page_alloc.c
View file @ 1fef8917
This diff is collapsed.
mm/slub.c
View file @ 1fef8917
This diff is collapsed.
mm/vmalloc.c
View file @ 1fef8917
This diff is collapsed.
mm/vmstat.c
View file @ 1fef8917
This diff is collapsed.
net/mac80211/Kconfig
View file @ 1fef8917
This diff is collapsed.
scripts/kconfig/expr.h
View file @ 1fef8917
This diff is collapsed.
scripts/kconfig/lkc.h
View file @ 1fef8917
This diff is collapsed.
scripts/kconfig/menu.c
View file @ 1fef8917
This diff is collapsed.
scripts/kconfig/zconf.gperf
View file @ 1fef8917
This diff is collapsed.
scripts/kconfig/zconf.hash.c_shipped
View file @ 1fef8917
This diff is collapsed.
scripts/kconfig/zconf.tab.c_shipped
View file @ 1fef8917
This diff is collapsed.
scripts/kconfig/zconf.y
View file @ 1fef8917
This diff is collapsed.
sound/core/oss/pcm_oss.c
View file @ 1fef8917
This diff is collapsed.
sound/pci/hda/patch_realtek.c
View file @ 1fef8917
This diff is collapsed.
sound/pci/hda/patch_sigmatel.c
View file @ 1fef8917
This diff is collapsed.
sound/soc/codecs/wm8731.c
View file @ 1fef8917
This diff is collapsed.
sound/soc/fsl/mpc8610_hpcd.c
View file @ 1fef8917
This diff is collapsed.
sound/soc/fsl/p1022_ds.c
View file @ 1fef8917
This diff is collapsed.
sound/soc/nuc900/nuc900-ac97.c
View file @ 1fef8917
This diff is collapsed.
sound/soc/nuc900/nuc900-audio.h
View file @ 1fef8917
This diff is collapsed.
sound/soc/nuc900/nuc900-pcm.c
View file @ 1fef8917
This diff is collapsed.
sound/soc/omap/Kconfig
View file @ 1fef8917
This diff is collapsed.
sound/soc/s6000/s6000-i2s.c
View file @ 1fef8917
This diff is collapsed.
sound/soc/s6000/s6000-pcm.c
View file @ 1fef8917
This diff is collapsed.
sound/soc/s6000/s6105-ipcam.c
View file @ 1fef8917
This diff is collapsed.
usr/initramfs_data.S
View file @ 1fef8917
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7