Commit 1ffab3d4 authored by Linus Torvalds's avatar Linus Torvalds

Merge tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Olof Johansson:
 "This is a batch of fixes for arm-soc platforms, most of it is for OMAP
  but there are others too (i.MX, Tegra, ep93xx).  Fixes warnings, some
  broken platforms and drivers, etc.  A bit all over the map really."

There was some concern about commit 68136b10 ("RM: sunxi: Change device
tree naming scheme for sunxi"), but Tony says:
 "Looks like that's trivial to fix as needed, no need to rebuild the
  branch to fix that AFAIK.

  The fix can be done once Olof is available online again.

  Linus, I suggest that you go ahead and pull this if there are no other
  issues with this branch."

* tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (32 commits)
  ARM: sunxi: Change device tree naming scheme for sunxi
  ARM: ux500: fix missing include
  ARM: u300: delete custom pin hog code
  ARM: davinci: fix build break due to missing include
  ARM: exynos: Fix warning due to missing 'inline' in stub
  ARM: imx: Move platform-mx2-emma to arch/arm/mach-imx/devices
  ARM i.MX51 clock: Fix regression since enabling MIPI/HSP clocks
  ARM: dts: mx27: Fix the AIPI bus for FEC
  ARM: OMAP2+: common: remove use of vram
  ARM: OMAP3/4: cpuidle: fix sparse and checkpatch warnings
  ARM: OMAP4: clock data: DPLLs are missing bypass clocks in their parent lists
  ARM: OMAP4: clock data: div_iva_hs_clk is a power-of-two divider
  ARM: OMAP4: Fix EMU clock domain always on
  ARM: OMAP4460: Workaround ABE DPLL failing to turn-on
  ARM: OMAP4: Enhance support for DPLLs with 4X multiplier
  ARM: OMAP4: Add function table for non-M4X dplls
  ARM: OMAP4: Update timer clock aliases
  ARM: OMAP: Move plat/omap-serial.h to include/linux/platform_data/serial-omap.h
  ARM: dts: Add build target for omap4-panda-a4
  ARM: dts: OMAP2420: Correct H4 board memory size
  ...
parents ddedec28 4d183913
...@@ -107,6 +107,7 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \ ...@@ -107,6 +107,7 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
omap3-evm.dtb \ omap3-evm.dtb \
omap3-tobi.dtb \ omap3-tobi.dtb \
omap4-panda.dtb \ omap4-panda.dtb \
omap4-panda-a4.dtb \
omap4-panda-es.dtb \ omap4-panda-es.dtb \
omap4-var-som.dtb \ omap4-var-som.dtb \
omap4-sdp.dtb \ omap4-sdp.dtb \
...@@ -131,8 +132,8 @@ dtb-$(CONFIG_ARCH_SPEAR3XX)+= spear300-evb.dtb \ ...@@ -131,8 +132,8 @@ dtb-$(CONFIG_ARCH_SPEAR3XX)+= spear300-evb.dtb \
spear320-evb.dtb \ spear320-evb.dtb \
spear320-hmi.dtb spear320-hmi.dtb
dtb-$(CONFIG_ARCH_SPEAR6XX)+= spear600-evb.dtb dtb-$(CONFIG_ARCH_SPEAR6XX)+= spear600-evb.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun4i-cubieboard.dtb \ dtb-$(CONFIG_ARCH_SUNXI) += sun4i-a10-cubieboard.dtb \
sun5i-olinuxino.dtb sun5i-a13-olinuxino.dtb
dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \ dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \
tegra20-medcom-wide.dtb \ tegra20-medcom-wide.dtb \
tegra20-paz00.dtb \ tegra20-paz00.dtb \
......
...@@ -21,17 +21,17 @@ memory { ...@@ -21,17 +21,17 @@ memory {
}; };
soc { soc {
aipi@10000000 { /* aipi */ aipi@10000000 { /* aipi1 */
uart1: serial@1000a000 { uart1: serial@1000a000 {
fsl,uart-has-rtscts; fsl,uart-has-rtscts;
status = "okay"; status = "okay";
}; };
};
fec@1002b000 { aipi@10020000 { /* aipi2 */
ethernet@1002b000 {
status = "okay"; status = "okay";
}; };
}; };
}; };
}; };
...@@ -21,8 +21,7 @@ memory { ...@@ -21,8 +21,7 @@ memory {
}; };
soc { soc {
aipi@10000000 { /* aipi */ aipi@10000000 { /* aipi1 */
serial@1000a000 { serial@1000a000 {
fsl,uart-has-rtscts; fsl,uart-has-rtscts;
status = "okay"; status = "okay";
...@@ -38,10 +37,6 @@ serial@1000c000 { ...@@ -38,10 +37,6 @@ serial@1000c000 {
status = "okay"; status = "okay";
}; };
ethernet@1002b000 {
status = "okay";
};
i2c@1001d000 { i2c@1001d000 {
clock-frequency = <400000>; clock-frequency = <400000>;
status = "okay"; status = "okay";
...@@ -60,6 +55,12 @@ lm75@4a { ...@@ -60,6 +55,12 @@ lm75@4a {
}; };
}; };
}; };
aipi@10020000 { /* aipi2 */
ethernet@1002b000 {
status = "okay";
};
};
}; };
nor_flash@c0000000 { nor_flash@c0000000 {
......
...@@ -55,7 +55,7 @@ aipi@10000000 { /* AIPI1 */ ...@@ -55,7 +55,7 @@ aipi@10000000 { /* AIPI1 */
compatible = "fsl,aipi-bus", "simple-bus"; compatible = "fsl,aipi-bus", "simple-bus";
#address-cells = <1>; #address-cells = <1>;
#size-cells = <1>; #size-cells = <1>;
reg = <0x10000000 0x10000000>; reg = <0x10000000 0x20000>;
ranges; ranges;
wdog: wdog@10002000 { wdog: wdog@10002000 {
...@@ -211,6 +211,15 @@ i2c2: i2c@1001d000 { ...@@ -211,6 +211,15 @@ i2c2: i2c@1001d000 {
status = "disabled"; status = "disabled";
}; };
};
aipi@10020000 { /* AIPI2 */
compatible = "fsl,aipi-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x10020000 0x20000>;
ranges;
fec: ethernet@1002b000 { fec: ethernet@1002b000 {
compatible = "fsl,imx27-fec"; compatible = "fsl,imx27-fec";
reg = <0x1002b000 0x4000>; reg = <0x1002b000 0x4000>;
......
...@@ -15,6 +15,6 @@ / { ...@@ -15,6 +15,6 @@ / {
memory { memory {
device_type = "memory"; device_type = "memory";
reg = <0x80000000 0x84000000>; /* 64 MB */ reg = <0x80000000 0x4000000>; /* 64 MB */
}; };
}; };
...@@ -11,11 +11,11 @@ ...@@ -11,11 +11,11 @@
*/ */
/dts-v1/; /dts-v1/;
/include/ "sun4i.dtsi" /include/ "sun4i-a10.dtsi"
/ { / {
model = "Cubietech Cubieboard"; model = "Cubietech Cubieboard";
compatible = "cubietech,cubieboard", "allwinner,sun4i"; compatible = "cubietech,a10-cubieboard", "allwinner,sun4i-a10";
aliases { aliases {
serial0 = &uart0; serial0 = &uart0;
......
...@@ -12,11 +12,11 @@ ...@@ -12,11 +12,11 @@
*/ */
/dts-v1/; /dts-v1/;
/include/ "sun5i.dtsi" /include/ "sun5i-a13.dtsi"
/ { / {
model = "Olimex A13-Olinuxino"; model = "Olimex A13-Olinuxino";
compatible = "olimex,a13-olinuxino", "allwinner,sun5i"; compatible = "olimex,a13-olinuxino", "allwinner,sun5i-a13";
chosen { chosen {
bootargs = "earlyprintk console=ttyS0,115200"; bootargs = "earlyprintk console=ttyS0,115200";
......
...@@ -41,6 +41,7 @@ ...@@ -41,6 +41,7 @@
#include <mach/cp_intc.h> #include <mach/cp_intc.h>
#include <mach/da8xx.h> #include <mach/da8xx.h>
#include <mach/mux.h> #include <mach/mux.h>
#include <mach/sram.h>
#include <asm/mach-types.h> #include <asm/mach-types.h>
#include <asm/mach/arch.h> #include <asm/mach/arch.h>
......
...@@ -47,13 +47,9 @@ static void __raw_writel(unsigned int value, unsigned int ptr) ...@@ -47,13 +47,9 @@ static void __raw_writel(unsigned int value, unsigned int ptr)
static inline void putc(int c) static inline void putc(int c)
{ {
int i;
for (i = 0; i < 1000; i++) {
/* Transmit fifo not full? */ /* Transmit fifo not full? */
if (!(__raw_readb(PHYS_UART_FLAG) & UART_FLAG_TXFF)) while (__raw_readb(PHYS_UART_FLAG) & UART_FLAG_TXFF)
break; ;
}
__raw_writeb(c, PHYS_UART_DATA); __raw_writeb(c, PHYS_UART_DATA);
} }
......
...@@ -25,7 +25,7 @@ void exynos_init_late(void); ...@@ -25,7 +25,7 @@ void exynos_init_late(void);
#ifdef CONFIG_PM_GENERIC_DOMAINS #ifdef CONFIG_PM_GENERIC_DOMAINS
int exynos_pm_late_initcall(void); int exynos_pm_late_initcall(void);
#else #else
static int exynos_pm_late_initcall(void) { return 0; } static inline int exynos_pm_late_initcall(void) { return 0; }
#endif #endif
#ifdef CONFIG_ARCH_EXYNOS4 #ifdef CONFIG_ARCH_EXYNOS4
......
...@@ -319,6 +319,7 @@ int __init mx51_clocks_init(unsigned long rate_ckil, unsigned long rate_osc, ...@@ -319,6 +319,7 @@ int __init mx51_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
unsigned long rate_ckih1, unsigned long rate_ckih2) unsigned long rate_ckih1, unsigned long rate_ckih2)
{ {
int i; int i;
u32 val;
struct device_node *np; struct device_node *np;
clk[pll1_sw] = imx_clk_pllv2("pll1_sw", "osc", MX51_DPLL1_BASE); clk[pll1_sw] = imx_clk_pllv2("pll1_sw", "osc", MX51_DPLL1_BASE);
...@@ -390,6 +391,21 @@ int __init mx51_clocks_init(unsigned long rate_ckil, unsigned long rate_osc, ...@@ -390,6 +391,21 @@ int __init mx51_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
imx_print_silicon_rev("i.MX51", mx51_revision()); imx_print_silicon_rev("i.MX51", mx51_revision());
clk_disable_unprepare(clk[iim_gate]); clk_disable_unprepare(clk[iim_gate]);
/*
* Reference Manual says: Functionality of CCDR[18] and CLPCR[23] is no
* longer supported. Set to one for better power saving.
*
* The effect of not setting these bits is that MIPI clocks can't be
* enabled without the IPU clock being enabled aswell.
*/
val = readl(MXC_CCM_CCDR);
val |= 1 << 18;
writel(val, MXC_CCM_CCDR);
val = readl(MXC_CCM_CLPCR);
val |= 1 << 23;
writel(val, MXC_CCM_CLPCR);
return 0; return 0;
} }
......
...@@ -6,8 +6,8 @@ ...@@ -6,8 +6,8 @@
* the terms of the GNU General Public License version 2 as published by the * the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation. * Free Software Foundation.
*/ */
#include <mach/hardware.h> #include "../hardware.h"
#include <mach/devices-common.h> #include "devices-common.h"
#define imx_mx2_emmaprp_data_entry_single(soc) \ #define imx_mx2_emmaprp_data_entry_single(soc) \
{ \ { \
......
...@@ -26,6 +26,8 @@ config SOC_HAS_OMAP2_SDRC ...@@ -26,6 +26,8 @@ config SOC_HAS_OMAP2_SDRC
config SOC_HAS_REALTIME_COUNTER config SOC_HAS_REALTIME_COUNTER
bool "Real time free running counter" bool "Real time free running counter"
depends on SOC_OMAP5
default y
config ARCH_OMAP2 config ARCH_OMAP2
bool "TI OMAP2" bool "TI OMAP2"
...@@ -79,7 +81,6 @@ config SOC_OMAP5 ...@@ -79,7 +81,6 @@ config SOC_OMAP5
select ARM_GIC select ARM_GIC
select CPU_V7 select CPU_V7
select HAVE_SMP select HAVE_SMP
select SOC_HAS_REALTIME_COUNTER
select COMMON_CLK select COMMON_CLK
comment "OMAP Core Type" comment "OMAP Core Type"
......
...@@ -157,6 +157,7 @@ static struct omap_dss_device sdp3430_lcd_device = { ...@@ -157,6 +157,7 @@ static struct omap_dss_device sdp3430_lcd_device = {
static struct tfp410_platform_data dvi_panel = { static struct tfp410_platform_data dvi_panel = {
.power_down_gpio = -1, .power_down_gpio = -1,
.i2c_bus_num = -1,
}; };
static struct omap_dss_device sdp3430_dvi_device = { static struct omap_dss_device sdp3430_dvi_device = {
......
...@@ -208,6 +208,7 @@ static struct omap_dss_device am3517_evm_tv_device = { ...@@ -208,6 +208,7 @@ static struct omap_dss_device am3517_evm_tv_device = {
static struct tfp410_platform_data dvi_panel = { static struct tfp410_platform_data dvi_panel = {
.power_down_gpio = -1, .power_down_gpio = -1,
.i2c_bus_num = -1,
}; };
static struct omap_dss_device am3517_evm_dvi_device = { static struct omap_dss_device am3517_evm_dvi_device = {
......
...@@ -241,6 +241,7 @@ static struct omap_dss_device cm_t35_lcd_device = { ...@@ -241,6 +241,7 @@ static struct omap_dss_device cm_t35_lcd_device = {
static struct tfp410_platform_data dvi_panel = { static struct tfp410_platform_data dvi_panel = {
.power_down_gpio = CM_T35_DVI_EN_GPIO, .power_down_gpio = CM_T35_DVI_EN_GPIO,
.i2c_bus_num = -1,
}; };
static struct omap_dss_device cm_t35_dvi_device = { static struct omap_dss_device cm_t35_dvi_device = {
......
...@@ -141,6 +141,7 @@ static struct omap_dss_device devkit8000_lcd_device = { ...@@ -141,6 +141,7 @@ static struct omap_dss_device devkit8000_lcd_device = {
static struct tfp410_platform_data dvi_panel = { static struct tfp410_platform_data dvi_panel = {
.power_down_gpio = -1, .power_down_gpio = -1,
.i2c_bus_num = 1,
}; };
static struct omap_dss_device devkit8000_dvi_device = { static struct omap_dss_device devkit8000_dvi_device = {
......
...@@ -27,14 +27,12 @@ ...@@ -27,14 +27,12 @@
#include <linux/io.h> #include <linux/io.h>
#include <linux/input/matrix_keypad.h> #include <linux/input/matrix_keypad.h>
#include <linux/mfd/menelaus.h> #include <linux/mfd/menelaus.h>
#include <linux/omap-dma.h>
#include <asm/mach-types.h> #include <asm/mach-types.h>
#include <asm/mach/arch.h> #include <asm/mach/arch.h>
#include <asm/mach/map.h> #include <asm/mach/map.h>
#include <linux/omap-dma.h>
#include <plat/debug-devices.h>
#include <video/omapdss.h> #include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h> #include <video/omap-panel-generic-dpi.h>
...@@ -42,11 +40,9 @@ ...@@ -42,11 +40,9 @@
#include "mux.h" #include "mux.h"
#include "control.h" #include "control.h"
#include "gpmc.h" #include "gpmc.h"
#include "gpmc-smc91x.h"
#define H4_FLASH_CS 0 #define H4_FLASH_CS 0
#define H4_SMC91X_CS 1
#define H4_ETHR_GPIO_IRQ 92
#if defined(CONFIG_KEYBOARD_MATRIX) || defined(CONFIG_KEYBOARD_MATRIX_MODULE) #if defined(CONFIG_KEYBOARD_MATRIX) || defined(CONFIG_KEYBOARD_MATRIX_MODULE)
static const uint32_t board_matrix_keys[] = { static const uint32_t board_matrix_keys[] = {
...@@ -250,71 +246,31 @@ static u32 is_gpmc_muxed(void) ...@@ -250,71 +246,31 @@ static u32 is_gpmc_muxed(void)
return 0; return 0;
} }
static inline void __init h4_init_debug(void) #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91x_MODULE)
{
int eth_cs;
unsigned long cs_mem_base;
unsigned int muxed, rate;
struct clk *gpmc_fck;
eth_cs = H4_SMC91X_CS;
gpmc_fck = clk_get(NULL, "gpmc_fck"); /* Always on ENABLE_ON_INIT */ static struct omap_smc91x_platform_data board_smc91x_data = {
if (IS_ERR(gpmc_fck)) { .cs = 1,
WARN_ON(1); .gpio_irq = 92,
return; .flags = GPMC_TIMINGS_SMC91C96 | IORESOURCE_IRQ_LOWLEVEL,
} };
clk_prepare_enable(gpmc_fck);
rate = clk_get_rate(gpmc_fck);
clk_disable_unprepare(gpmc_fck);
clk_put(gpmc_fck);
static void __init board_smc91x_init(void)
{
if (is_gpmc_muxed()) if (is_gpmc_muxed())
muxed = 0x200; board_smc91x_data.flags |= GPMC_MUX_ADD_DATA;
else
muxed = 0;
/* Make sure CS1 timings are correct */
gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG1,
0x00011000 | muxed);
if (rate >= 160000000) {
gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f01);
gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080803);
gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1c0b1c0a);
gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F);
gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4);
} else if (rate >= 130000000) {
gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00);
gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802);
gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09);
gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F);
gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4);
} else {/* rate = 100000000 */
gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00);
gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802);
gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09);
gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x031A1F1F);
gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000003C2);
}
if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) {
printk(KERN_ERR "Failed to request GPMC mem for smc91x\n");
goto out;
}
udelay(100); omap_mux_init_gpio(board_smc91x_data.gpio_irq, OMAP_PIN_INPUT);
gpmc_smc91x_init(&board_smc91x_data);
}
omap_mux_init_gpio(92, 0); #else
if (debug_card_init(cs_mem_base, H4_ETHR_GPIO_IRQ) < 0)
gpmc_cs_free(eth_cs);
out: static inline void board_smc91x_init(void)
clk_disable_unprepare(gpmc_fck); {
clk_put(gpmc_fck);
} }
#endif
static void __init h4_init_flash(void) static void __init h4_init_flash(void)
{ {
unsigned long base; unsigned long base;
...@@ -371,6 +327,7 @@ static void __init omap_h4_init(void) ...@@ -371,6 +327,7 @@ static void __init omap_h4_init(void)
omap_serial_init(); omap_serial_init();
omap_sdrc_init(NULL, NULL); omap_sdrc_init(NULL, NULL);
h4_init_flash(); h4_init_flash();
board_smc91x_init();
omap_display_init(&h4_dss_data); omap_display_init(&h4_dss_data);
} }
......
...@@ -240,6 +240,7 @@ static struct omap_dss_device omap3_evm_tv_device = { ...@@ -240,6 +240,7 @@ static struct omap_dss_device omap3_evm_tv_device = {
static struct tfp410_platform_data dvi_panel = { static struct tfp410_platform_data dvi_panel = {
.power_down_gpio = OMAP3EVM_DVI_PANEL_EN_GPIO, .power_down_gpio = OMAP3EVM_DVI_PANEL_EN_GPIO,
.i2c_bus_num = -1,
}; };
static struct omap_dss_device omap3_evm_dvi_device = { static struct omap_dss_device omap3_evm_dvi_device = {
......
...@@ -118,6 +118,7 @@ static struct omap_dss_device omap3_stalker_tv_device = { ...@@ -118,6 +118,7 @@ static struct omap_dss_device omap3_stalker_tv_device = {
static struct tfp410_platform_data dvi_panel = { static struct tfp410_platform_data dvi_panel = {
.power_down_gpio = DSS_ENABLE_GPIO, .power_down_gpio = DSS_ENABLE_GPIO,
.i2c_bus_num = -1,
}; };
static struct omap_dss_device omap3_stalker_dvi_device = { static struct omap_dss_device omap3_stalker_dvi_device = {
......
...@@ -40,6 +40,14 @@ ...@@ -40,6 +40,14 @@
#define OMAP4430_MODULEMODE_HWCTRL_SHIFT 0 #define OMAP4430_MODULEMODE_HWCTRL_SHIFT 0
#define OMAP4430_MODULEMODE_SWCTRL_SHIFT 1 #define OMAP4430_MODULEMODE_SWCTRL_SHIFT 1
/*
* OMAP4 ABE DPLL default frequency. In OMAP4460 TRM version V, section
* "3.6.3.2.3 CM1_ABE Clock Generator" states that the "DPLL_ABE_X2_CLK
* must be set to 196.608 MHz" and hence, the DPLL locked frequency is
* half of this value.
*/
#define OMAP4_DPLL_ABE_DEFFREQ 98304000
/* Root clocks */ /* Root clocks */
DEFINE_CLK_FIXED_RATE(extalt_clkin_ck, CLK_IS_ROOT, 59000000, 0x0); DEFINE_CLK_FIXED_RATE(extalt_clkin_ck, CLK_IS_ROOT, 59000000, 0x0);
...@@ -124,6 +132,8 @@ static struct dpll_data dpll_abe_dd = { ...@@ -124,6 +132,8 @@ static struct dpll_data dpll_abe_dd = {
.enable_mask = OMAP4430_DPLL_EN_MASK, .enable_mask = OMAP4430_DPLL_EN_MASK,
.autoidle_mask = OMAP4430_AUTO_DPLL_MODE_MASK, .autoidle_mask = OMAP4430_AUTO_DPLL_MODE_MASK,
.idlest_mask = OMAP4430_ST_DPLL_CLK_MASK, .idlest_mask = OMAP4430_ST_DPLL_CLK_MASK,
.m4xen_mask = OMAP4430_DPLL_REGM4XEN_MASK,
.lpmode_mask = OMAP4430_DPLL_LPMODE_EN_MASK,
.max_multiplier = 2047, .max_multiplier = 2047,
.max_divider = 128, .max_divider = 128,
.min_divider = 1, .min_divider = 1,
...@@ -233,7 +243,7 @@ static struct dpll_data dpll_core_dd = { ...@@ -233,7 +243,7 @@ static struct dpll_data dpll_core_dd = {
static const char *dpll_core_ck_parents[] = { static const char *dpll_core_ck_parents[] = {
"sys_clkin_ck", "sys_clkin_ck", "core_hsd_byp_clk_mux_ck"
}; };
static struct clk dpll_core_ck; static struct clk dpll_core_ck;
...@@ -286,9 +296,9 @@ DEFINE_CLK_DIVIDER(div_core_ck, "dpll_core_m5x2_ck", &dpll_core_m5x2_ck, 0x0, ...@@ -286,9 +296,9 @@ DEFINE_CLK_DIVIDER(div_core_ck, "dpll_core_m5x2_ck", &dpll_core_m5x2_ck, 0x0,
OMAP4430_CM_CLKSEL_CORE, OMAP4430_CLKSEL_CORE_SHIFT, OMAP4430_CM_CLKSEL_CORE, OMAP4430_CLKSEL_CORE_SHIFT,
OMAP4430_CLKSEL_CORE_WIDTH, 0x0, NULL); OMAP4430_CLKSEL_CORE_WIDTH, 0x0, NULL);
DEFINE_CLK_OMAP_HSDIVIDER(div_iva_hs_clk, "dpll_core_m5x2_ck", DEFINE_CLK_DIVIDER(div_iva_hs_clk, "dpll_core_m5x2_ck", &dpll_core_m5x2_ck,
&dpll_core_m5x2_ck, 0x0, OMAP4430_CM_BYPCLK_DPLL_IVA, 0x0, OMAP4430_CM_BYPCLK_DPLL_IVA, OMAP4430_CLKSEL_0_1_SHIFT,
OMAP4430_CLKSEL_0_1_MASK); OMAP4430_CLKSEL_0_1_WIDTH, CLK_DIVIDER_POWER_OF_TWO, NULL);
DEFINE_CLK_DIVIDER(div_mpu_hs_clk, "dpll_core_m5x2_ck", &dpll_core_m5x2_ck, DEFINE_CLK_DIVIDER(div_mpu_hs_clk, "dpll_core_m5x2_ck", &dpll_core_m5x2_ck,
0x0, OMAP4430_CM_BYPCLK_DPLL_MPU, OMAP4430_CLKSEL_0_1_SHIFT, 0x0, OMAP4430_CM_BYPCLK_DPLL_MPU, OMAP4430_CLKSEL_0_1_SHIFT,
...@@ -363,8 +373,21 @@ static struct dpll_data dpll_iva_dd = { ...@@ -363,8 +373,21 @@ static struct dpll_data dpll_iva_dd = {
.min_divider = 1, .min_divider = 1,
}; };
static const char *dpll_iva_ck_parents[] = {
"sys_clkin_ck", "iva_hsd_byp_clk_mux_ck"
};
static struct clk dpll_iva_ck; static struct clk dpll_iva_ck;
static const struct clk_ops dpll_ck_ops = {
.enable = &omap3_noncore_dpll_enable,
.disable = &omap3_noncore_dpll_disable,
.recalc_rate = &omap3_dpll_recalc,
.round_rate = &omap2_dpll_round_rate,
.set_rate = &omap3_noncore_dpll_set_rate,
.get_parent = &omap2_init_dpll_parent,
};
static struct clk_hw_omap dpll_iva_ck_hw = { static struct clk_hw_omap dpll_iva_ck_hw = {
.hw = { .hw = {
.clk = &dpll_iva_ck, .clk = &dpll_iva_ck,
...@@ -373,7 +396,7 @@ static struct clk_hw_omap dpll_iva_ck_hw = { ...@@ -373,7 +396,7 @@ static struct clk_hw_omap dpll_iva_ck_hw = {
.ops = &clkhwops_omap3_dpll, .ops = &clkhwops_omap3_dpll,
}; };
DEFINE_STRUCT_CLK(dpll_iva_ck, dpll_core_ck_parents, dpll_abe_ck_ops); DEFINE_STRUCT_CLK(dpll_iva_ck, dpll_iva_ck_parents, dpll_ck_ops);
static const char *dpll_iva_x2_ck_parents[] = { static const char *dpll_iva_x2_ck_parents[] = {
"dpll_iva_ck", "dpll_iva_ck",
...@@ -416,6 +439,10 @@ static struct dpll_data dpll_mpu_dd = { ...@@ -416,6 +439,10 @@ static struct dpll_data dpll_mpu_dd = {
.min_divider = 1, .min_divider = 1,
}; };
static const char *dpll_mpu_ck_parents[] = {
"sys_clkin_ck", "div_mpu_hs_clk"
};
static struct clk dpll_mpu_ck; static struct clk dpll_mpu_ck;
static struct clk_hw_omap dpll_mpu_ck_hw = { static struct clk_hw_omap dpll_mpu_ck_hw = {
...@@ -426,7 +453,7 @@ static struct clk_hw_omap dpll_mpu_ck_hw = { ...@@ -426,7 +453,7 @@ static struct clk_hw_omap dpll_mpu_ck_hw = {
.ops = &clkhwops_omap3_dpll, .ops = &clkhwops_omap3_dpll,
}; };
DEFINE_STRUCT_CLK(dpll_mpu_ck, dpll_core_ck_parents, dpll_abe_ck_ops); DEFINE_STRUCT_CLK(dpll_mpu_ck, dpll_mpu_ck_parents, dpll_ck_ops);
DEFINE_CLK_FIXED_FACTOR(mpu_periphclk, "dpll_mpu_ck", &dpll_mpu_ck, 0x0, 1, 2); DEFINE_CLK_FIXED_FACTOR(mpu_periphclk, "dpll_mpu_ck", &dpll_mpu_ck, 0x0, 1, 2);
...@@ -464,6 +491,9 @@ static struct dpll_data dpll_per_dd = { ...@@ -464,6 +491,9 @@ static struct dpll_data dpll_per_dd = {
.min_divider = 1, .min_divider = 1,
}; };
static const char *dpll_per_ck_parents[] = {
"sys_clkin_ck", "per_hsd_byp_clk_mux_ck"
};
static struct clk dpll_per_ck; static struct clk dpll_per_ck;
...@@ -475,7 +505,7 @@ static struct clk_hw_omap dpll_per_ck_hw = { ...@@ -475,7 +505,7 @@ static struct clk_hw_omap dpll_per_ck_hw = {
.ops = &clkhwops_omap3_dpll, .ops = &clkhwops_omap3_dpll,
}; };
DEFINE_STRUCT_CLK(dpll_per_ck, dpll_core_ck_parents, dpll_abe_ck_ops); DEFINE_STRUCT_CLK(dpll_per_ck, dpll_per_ck_parents, dpll_ck_ops);
DEFINE_CLK_DIVIDER(dpll_per_m2_ck, "dpll_per_ck", &dpll_per_ck, 0x0, DEFINE_CLK_DIVIDER(dpll_per_m2_ck, "dpll_per_ck", &dpll_per_ck, 0x0,
OMAP4430_CM_DIV_M2_DPLL_PER, OMAP4430_DPLL_CLKOUT_DIV_SHIFT, OMAP4430_CM_DIV_M2_DPLL_PER, OMAP4430_DPLL_CLKOUT_DIV_SHIFT,
...@@ -559,6 +589,10 @@ static struct dpll_data dpll_usb_dd = { ...@@ -559,6 +589,10 @@ static struct dpll_data dpll_usb_dd = {
.min_divider = 1, .min_divider = 1,
}; };
static const char *dpll_usb_ck_parents[] = {
"sys_clkin_ck", "usb_hs_clk_div_ck"
};
static struct clk dpll_usb_ck; static struct clk dpll_usb_ck;
static struct clk_hw_omap dpll_usb_ck_hw = { static struct clk_hw_omap dpll_usb_ck_hw = {
...@@ -569,7 +603,7 @@ static struct clk_hw_omap dpll_usb_ck_hw = { ...@@ -569,7 +603,7 @@ static struct clk_hw_omap dpll_usb_ck_hw = {
.ops = &clkhwops_omap3_dpll, .ops = &clkhwops_omap3_dpll,
}; };
DEFINE_STRUCT_CLK(dpll_usb_ck, dpll_core_ck_parents, dpll_abe_ck_ops); DEFINE_STRUCT_CLK(dpll_usb_ck, dpll_usb_ck_parents, dpll_ck_ops);
static const char *dpll_usb_clkdcoldo_ck_parents[] = { static const char *dpll_usb_clkdcoldo_ck_parents[] = {
"dpll_usb_ck", "dpll_usb_ck",
...@@ -696,9 +730,13 @@ DEFINE_CLK_DIVIDER(syc_clk_div_ck, "sys_clkin_ck", &sys_clkin_ck, 0x0, ...@@ -696,9 +730,13 @@ DEFINE_CLK_DIVIDER(syc_clk_div_ck, "sys_clkin_ck", &sys_clkin_ck, 0x0,
OMAP4430_CM_ABE_DSS_SYS_CLKSEL, OMAP4430_CLKSEL_0_0_SHIFT, OMAP4430_CM_ABE_DSS_SYS_CLKSEL, OMAP4430_CLKSEL_0_0_SHIFT,
OMAP4430_CLKSEL_0_0_WIDTH, 0x0, NULL); OMAP4430_CLKSEL_0_0_WIDTH, 0x0, NULL);
static const char *dbgclk_mux_ck_parents[] = {
"sys_clkin_ck"
};
static struct clk dbgclk_mux_ck; static struct clk dbgclk_mux_ck;
DEFINE_STRUCT_CLK_HW_OMAP(dbgclk_mux_ck, NULL); DEFINE_STRUCT_CLK_HW_OMAP(dbgclk_mux_ck, NULL);
DEFINE_STRUCT_CLK(dbgclk_mux_ck, dpll_core_ck_parents, DEFINE_STRUCT_CLK(dbgclk_mux_ck, dbgclk_mux_ck_parents,
dpll_usb_clkdcoldo_ck_ops); dpll_usb_clkdcoldo_ck_ops);
/* Leaf clocks controlled by modules */ /* Leaf clocks controlled by modules */
...@@ -1935,10 +1973,10 @@ static struct omap_clk omap44xx_clks[] = { ...@@ -1935,10 +1973,10 @@ static struct omap_clk omap44xx_clks[] = {
CLK("4803e000.timer", "timer_sys_ck", &sys_clkin_ck, CK_443X), CLK("4803e000.timer", "timer_sys_ck", &sys_clkin_ck, CK_443X),
CLK("48086000.timer", "timer_sys_ck", &sys_clkin_ck, CK_443X), CLK("48086000.timer", "timer_sys_ck", &sys_clkin_ck, CK_443X),
CLK("48088000.timer", "timer_sys_ck", &sys_clkin_ck, CK_443X), CLK("48088000.timer", "timer_sys_ck", &sys_clkin_ck, CK_443X),
CLK("49038000.timer", "timer_sys_ck", &syc_clk_div_ck, CK_443X), CLK("40138000.timer", "timer_sys_ck", &syc_clk_div_ck, CK_443X),
CLK("4903a000.timer", "timer_sys_ck", &syc_clk_div_ck, CK_443X), CLK("4013a000.timer", "timer_sys_ck", &syc_clk_div_ck, CK_443X),
CLK("4903c000.timer", "timer_sys_ck", &syc_clk_div_ck, CK_443X), CLK("4013c000.timer", "timer_sys_ck", &syc_clk_div_ck, CK_443X),
CLK("4903e000.timer", "timer_sys_ck", &syc_clk_div_ck, CK_443X), CLK("4013e000.timer", "timer_sys_ck", &syc_clk_div_ck, CK_443X),
CLK(NULL, "cpufreq_ck", &dpll_mpu_ck, CK_443X), CLK(NULL, "cpufreq_ck", &dpll_mpu_ck, CK_443X),
}; };
...@@ -1955,6 +1993,7 @@ int __init omap4xxx_clk_init(void) ...@@ -1955,6 +1993,7 @@ int __init omap4xxx_clk_init(void)
{ {
u32 cpu_clkflg; u32 cpu_clkflg;
struct omap_clk *c; struct omap_clk *c;
int rc;
if (cpu_is_omap443x()) { if (cpu_is_omap443x()) {
cpu_mask = RATE_IN_4430; cpu_mask = RATE_IN_4430;
...@@ -1983,5 +2022,18 @@ int __init omap4xxx_clk_init(void) ...@@ -1983,5 +2022,18 @@ int __init omap4xxx_clk_init(void)
omap2_clk_enable_init_clocks(enable_init_clks, omap2_clk_enable_init_clocks(enable_init_clks,
ARRAY_SIZE(enable_init_clks)); ARRAY_SIZE(enable_init_clks));
/*
* On OMAP4460 the ABE DPLL fails to turn on if in idle low-power
* state when turning the ABE clock domain. Workaround this by
* locking the ABE DPLL on boot.
*/
if (cpu_is_omap446x()) {
rc = clk_set_parent(&abe_dpll_refclk_mux_ck, &sys_32k_ck);
if (!rc)
rc = clk_set_rate(&dpll_abe_ck, OMAP4_DPLL_ABE_DEFFREQ);
if (rc)
pr_err("%s: failed to configure ABE DPLL!\n", __func__);
}
return 0; return 0;
} }
...@@ -195,6 +195,10 @@ struct clksel { ...@@ -195,6 +195,10 @@ struct clksel {
* @enable_mask: mask of the DPLL mode bitfield in @control_reg * @enable_mask: mask of the DPLL mode bitfield in @control_reg
* @last_rounded_rate: cache of the last rate result of omap2_dpll_round_rate() * @last_rounded_rate: cache of the last rate result of omap2_dpll_round_rate()
* @last_rounded_m: cache of the last M result of omap2_dpll_round_rate() * @last_rounded_m: cache of the last M result of omap2_dpll_round_rate()
* @last_rounded_m4xen: cache of the last M4X result of
* omap4_dpll_regm4xen_round_rate()
* @last_rounded_lpmode: cache of the last lpmode result of
* omap4_dpll_lpmode_recalc()
* @max_multiplier: maximum valid non-bypass multiplier value (actual) * @max_multiplier: maximum valid non-bypass multiplier value (actual)
* @last_rounded_n: cache of the last N result of omap2_dpll_round_rate() * @last_rounded_n: cache of the last N result of omap2_dpll_round_rate()
* @min_divider: minimum valid non-bypass divider value (actual) * @min_divider: minimum valid non-bypass divider value (actual)
...@@ -205,6 +209,8 @@ struct clksel { ...@@ -205,6 +209,8 @@ struct clksel {
* @autoidle_mask: mask of the DPLL autoidle mode bitfield in @autoidle_reg * @autoidle_mask: mask of the DPLL autoidle mode bitfield in @autoidle_reg
* @freqsel_mask: mask of the DPLL jitter correction bitfield in @control_reg * @freqsel_mask: mask of the DPLL jitter correction bitfield in @control_reg
* @idlest_mask: mask of the DPLL idle status bitfield in @idlest_reg * @idlest_mask: mask of the DPLL idle status bitfield in @idlest_reg
* @lpmode_mask: mask of the DPLL low-power mode bitfield in @control_reg
* @m4xen_mask: mask of the DPLL M4X multiplier bitfield in @control_reg
* @auto_recal_bit: bitshift of the driftguard enable bit in @control_reg * @auto_recal_bit: bitshift of the driftguard enable bit in @control_reg
* @recal_en_bit: bitshift of the PRM_IRQENABLE_* bit for recalibration IRQs * @recal_en_bit: bitshift of the PRM_IRQENABLE_* bit for recalibration IRQs
* @recal_st_bit: bitshift of the PRM_IRQSTATUS_* bit for recalibration IRQs * @recal_st_bit: bitshift of the PRM_IRQSTATUS_* bit for recalibration IRQs
...@@ -233,6 +239,8 @@ struct dpll_data { ...@@ -233,6 +239,8 @@ struct dpll_data {
u32 enable_mask; u32 enable_mask;
unsigned long last_rounded_rate; unsigned long last_rounded_rate;
u16 last_rounded_m; u16 last_rounded_m;
u8 last_rounded_m4xen;
u8 last_rounded_lpmode;
u16 max_multiplier; u16 max_multiplier;
u8 last_rounded_n; u8 last_rounded_n;
u8 min_divider; u8 min_divider;
...@@ -245,6 +253,8 @@ struct dpll_data { ...@@ -245,6 +253,8 @@ struct dpll_data {
u32 idlest_mask; u32 idlest_mask;
u32 dco_mask; u32 dco_mask;
u32 sddiv_mask; u32 sddiv_mask;
u32 lpmode_mask;
u32 m4xen_mask;
u8 auto_recal_bit; u8 auto_recal_bit;
u8 recal_en_bit; u8 recal_en_bit;
u8 recal_st_bit; u8 recal_st_bit;
......
...@@ -998,7 +998,8 @@ int clkdm_clk_disable(struct clockdomain *clkdm, struct clk *clk) ...@@ -998,7 +998,8 @@ int clkdm_clk_disable(struct clockdomain *clkdm, struct clk *clk)
spin_lock_irqsave(&clkdm->lock, flags); spin_lock_irqsave(&clkdm->lock, flags);
/* corner case: disabling unused clocks */ /* corner case: disabling unused clocks */
if (__clk_get_enable_count(clk) == 0) if ((__clk_get_enable_count(clk) == 0) &&
(atomic_read(&clkdm->usecount) == 0))
goto ccd_exit; goto ccd_exit;
if (atomic_read(&clkdm->usecount) == 0) { if (atomic_read(&clkdm->usecount) == 0) {
......
...@@ -16,8 +16,6 @@ ...@@ -16,8 +16,6 @@
#include <linux/init.h> #include <linux/init.h>
#include <linux/platform_data/dsp-omap.h> #include <linux/platform_data/dsp-omap.h>
#include <plat/vram.h>
#include "common.h" #include "common.h"
#include "omap-secure.h" #include "omap-secure.h"
...@@ -32,7 +30,6 @@ int __weak omap_secure_ram_reserve_memblock(void) ...@@ -32,7 +30,6 @@ int __weak omap_secure_ram_reserve_memblock(void)
void __init omap_reserve(void) void __init omap_reserve(void)
{ {
omap_vram_reserve_sdram_memblock();
omap_dsp_reserve_sdram_memblock(); omap_dsp_reserve_sdram_memblock();
omap_secure_ram_reserve_memblock(); omap_secure_ram_reserve_memblock();
omap_barrier_reserve_memblock(); omap_barrier_reserve_memblock();
......
...@@ -40,6 +40,8 @@ struct omap3_idle_statedata { ...@@ -40,6 +40,8 @@ struct omap3_idle_statedata {
u32 core_state; u32 core_state;
}; };
static struct powerdomain *mpu_pd, *core_pd, *per_pd, *cam_pd;
static struct omap3_idle_statedata omap3_idle_data[] = { static struct omap3_idle_statedata omap3_idle_data[] = {
{ {
.mpu_state = PWRDM_POWER_ON, .mpu_state = PWRDM_POWER_ON,
...@@ -71,7 +73,7 @@ static struct omap3_idle_statedata omap3_idle_data[] = { ...@@ -71,7 +73,7 @@ static struct omap3_idle_statedata omap3_idle_data[] = {
}, },
}; };
static struct powerdomain *mpu_pd, *core_pd, *per_pd, *cam_pd; /* Private functions */
static int __omap3_enter_idle(struct cpuidle_device *dev, static int __omap3_enter_idle(struct cpuidle_device *dev,
struct cpuidle_driver *drv, struct cpuidle_driver *drv,
...@@ -260,9 +262,9 @@ static int omap3_enter_idle_bm(struct cpuidle_device *dev, ...@@ -260,9 +262,9 @@ static int omap3_enter_idle_bm(struct cpuidle_device *dev,
return ret; return ret;
} }
DEFINE_PER_CPU(struct cpuidle_device, omap3_idle_dev); static DEFINE_PER_CPU(struct cpuidle_device, omap3_idle_dev);
struct cpuidle_driver omap3_idle_driver = { static struct cpuidle_driver omap3_idle_driver = {
.name = "omap3_idle", .name = "omap3_idle",
.owner = THIS_MODULE, .owner = THIS_MODULE,
.states = { .states = {
...@@ -327,6 +329,8 @@ struct cpuidle_driver omap3_idle_driver = { ...@@ -327,6 +329,8 @@ struct cpuidle_driver omap3_idle_driver = {
.safe_state_index = 0, .safe_state_index = 0,
}; };
/* Public functions */
/** /**
* omap3_idle_init - Init routine for OMAP3 idle * omap3_idle_init - Init routine for OMAP3 idle
* *
......
...@@ -54,6 +54,8 @@ static struct clockdomain *cpu_clkdm[NR_CPUS]; ...@@ -54,6 +54,8 @@ static struct clockdomain *cpu_clkdm[NR_CPUS];
static atomic_t abort_barrier; static atomic_t abort_barrier;
static bool cpu_done[NR_CPUS]; static bool cpu_done[NR_CPUS];
/* Private functions */
/** /**
* omap4_enter_idle_coupled_[simple/coupled] - OMAP4 cpuidle entry functions * omap4_enter_idle_coupled_[simple/coupled] - OMAP4 cpuidle entry functions
* @dev: cpuidle device * @dev: cpuidle device
...@@ -161,9 +163,19 @@ static int omap4_enter_idle_coupled(struct cpuidle_device *dev, ...@@ -161,9 +163,19 @@ static int omap4_enter_idle_coupled(struct cpuidle_device *dev,
return index; return index;
} }
DEFINE_PER_CPU(struct cpuidle_device, omap4_idle_dev); /*
* For each cpu, setup the broadcast timer because local timers
* stops for the states above C1.
*/
static void omap_setup_broadcast_timer(void *arg)
{
int cpu = smp_processor_id();
clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ON, &cpu);
}
static DEFINE_PER_CPU(struct cpuidle_device, omap4_idle_dev);
struct cpuidle_driver omap4_idle_driver = { static struct cpuidle_driver omap4_idle_driver = {
.name = "omap4_idle", .name = "omap4_idle",
.owner = THIS_MODULE, .owner = THIS_MODULE,
.en_core_tk_irqen = 1, .en_core_tk_irqen = 1,
...@@ -200,15 +212,7 @@ struct cpuidle_driver omap4_idle_driver = { ...@@ -200,15 +212,7 @@ struct cpuidle_driver omap4_idle_driver = {
.safe_state_index = 0, .safe_state_index = 0,
}; };
/* /* Public functions */
* For each cpu, setup the broadcast timer because local timers
* stops for the states above C1.
*/
static void omap_setup_broadcast_timer(void *arg)
{
int cpu = smp_processor_id();
clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ON, &cpu);
}
/** /**
* omap4_idle_init - Init routine for OMAP4 idle * omap4_idle_init - Init routine for OMAP4 idle
......
...@@ -292,15 +292,12 @@ static void _lookup_sddiv(struct clk_hw_omap *clk, u8 *sd_div, u16 m, u8 n) ...@@ -292,15 +292,12 @@ static void _lookup_sddiv(struct clk_hw_omap *clk, u8 *sd_div, u16 m, u8 n)
/* /*
* _omap3_noncore_dpll_program - set non-core DPLL M,N values directly * _omap3_noncore_dpll_program - set non-core DPLL M,N values directly
* @clk: struct clk * of DPLL to set * @clk: struct clk * of DPLL to set
* @m: DPLL multiplier to set
* @n: DPLL divider to set
* @freqsel: FREQSEL value to set * @freqsel: FREQSEL value to set
* *
* Program the DPLL with the supplied M, N values, and wait for the DPLL to * Program the DPLL with the last M, N values calculated, and wait for
* lock.. Returns -EINVAL upon error, or 0 upon success. * the DPLL to lock. Returns -EINVAL upon error, or 0 upon success.
*/ */
static int omap3_noncore_dpll_program(struct clk_hw_omap *clk, u16 m, u8 n, static int omap3_noncore_dpll_program(struct clk_hw_omap *clk, u16 freqsel)
u16 freqsel)
{ {
struct dpll_data *dd = clk->dpll_data; struct dpll_data *dd = clk->dpll_data;
u8 dco, sd_div; u8 dco, sd_div;
...@@ -323,23 +320,45 @@ static int omap3_noncore_dpll_program(struct clk_hw_omap *clk, u16 m, u8 n, ...@@ -323,23 +320,45 @@ static int omap3_noncore_dpll_program(struct clk_hw_omap *clk, u16 m, u8 n,
/* Set DPLL multiplier, divider */ /* Set DPLL multiplier, divider */
v = __raw_readl(dd->mult_div1_reg); v = __raw_readl(dd->mult_div1_reg);
v &= ~(dd->mult_mask | dd->div1_mask); v &= ~(dd->mult_mask | dd->div1_mask);
v |= m << __ffs(dd->mult_mask); v |= dd->last_rounded_m << __ffs(dd->mult_mask);
v |= (n - 1) << __ffs(dd->div1_mask); v |= (dd->last_rounded_n - 1) << __ffs(dd->div1_mask);
/* Configure dco and sd_div for dplls that have these fields */ /* Configure dco and sd_div for dplls that have these fields */
if (dd->dco_mask) { if (dd->dco_mask) {
_lookup_dco(clk, &dco, m, n); _lookup_dco(clk, &dco, dd->last_rounded_m, dd->last_rounded_n);
v &= ~(dd->dco_mask); v &= ~(dd->dco_mask);
v |= dco << __ffs(dd->dco_mask); v |= dco << __ffs(dd->dco_mask);
} }
if (dd->sddiv_mask) { if (dd->sddiv_mask) {
_lookup_sddiv(clk, &sd_div, m, n); _lookup_sddiv(clk, &sd_div, dd->last_rounded_m,
dd->last_rounded_n);
v &= ~(dd->sddiv_mask); v &= ~(dd->sddiv_mask);
v |= sd_div << __ffs(dd->sddiv_mask); v |= sd_div << __ffs(dd->sddiv_mask);
} }
__raw_writel(v, dd->mult_div1_reg); __raw_writel(v, dd->mult_div1_reg);
/* Set 4X multiplier and low-power mode */
if (dd->m4xen_mask || dd->lpmode_mask) {
v = __raw_readl(dd->control_reg);
if (dd->m4xen_mask) {
if (dd->last_rounded_m4xen)
v |= dd->m4xen_mask;
else
v &= ~dd->m4xen_mask;
}
if (dd->lpmode_mask) {
if (dd->last_rounded_lpmode)
v |= dd->lpmode_mask;
else
v &= ~dd->lpmode_mask;
}
__raw_writel(v, dd->control_reg);
}
/* We let the clock framework set the other output dividers later */ /* We let the clock framework set the other output dividers later */
/* REVISIT: Set ramp-up delay? */ /* REVISIT: Set ramp-up delay? */
...@@ -492,8 +511,7 @@ int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate, ...@@ -492,8 +511,7 @@ int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate,
pr_debug("%s: %s: set rate: locking rate to %lu.\n", pr_debug("%s: %s: set rate: locking rate to %lu.\n",
__func__, __clk_get_name(hw->clk), rate); __func__, __clk_get_name(hw->clk), rate);
ret = omap3_noncore_dpll_program(clk, dd->last_rounded_m, ret = omap3_noncore_dpll_program(clk, freqsel);
dd->last_rounded_n, freqsel);
if (!ret) if (!ret)
new_parent = dd->clk_ref; new_parent = dd->clk_ref;
} }
......
...@@ -20,6 +20,15 @@ ...@@ -20,6 +20,15 @@
#include "clock44xx.h" #include "clock44xx.h"
#include "cm-regbits-44xx.h" #include "cm-regbits-44xx.h"
/*
* Maximum DPLL input frequency (FINT) and output frequency (FOUT) that
* can supported when using the DPLL low-power mode. Frequencies are
* defined in OMAP4430/60 Public TRM section 3.6.3.3.2 "Enable Control,
* Status, and Low-Power Operation Mode".
*/
#define OMAP4_DPLL_LP_FINT_MAX 1000000
#define OMAP4_DPLL_LP_FOUT_MAX 100000000
/* Supported only on OMAP4 */ /* Supported only on OMAP4 */
int omap4_dpllmx_gatectrl_read(struct clk_hw_omap *clk) int omap4_dpllmx_gatectrl_read(struct clk_hw_omap *clk)
{ {
...@@ -81,6 +90,31 @@ const struct clk_hw_omap_ops clkhwops_omap4_dpllmx = { ...@@ -81,6 +90,31 @@ const struct clk_hw_omap_ops clkhwops_omap4_dpllmx = {
.deny_idle = omap4_dpllmx_deny_gatectrl, .deny_idle = omap4_dpllmx_deny_gatectrl,
}; };
/**
* omap4_dpll_lpmode_recalc - compute DPLL low-power setting
* @dd: pointer to the dpll data structure
*
* Calculates if low-power mode can be enabled based upon the last
* multiplier and divider values calculated. If low-power mode can be
* enabled, then the bit to enable low-power mode is stored in the
* last_rounded_lpmode variable. This implementation is based upon the
* criteria for enabling low-power mode as described in the OMAP4430/60
* Public TRM section 3.6.3.3.2 "Enable Control, Status, and Low-Power
* Operation Mode".
*/
static void omap4_dpll_lpmode_recalc(struct dpll_data *dd)
{
long fint, fout;
fint = __clk_get_rate(dd->clk_ref) / (dd->last_rounded_n + 1);
fout = fint * dd->last_rounded_m;
if ((fint < OMAP4_DPLL_LP_FINT_MAX) && (fout < OMAP4_DPLL_LP_FOUT_MAX))
dd->last_rounded_lpmode = 1;
else
dd->last_rounded_lpmode = 0;
}
/** /**
* omap4_dpll_regm4xen_recalc - compute DPLL rate, considering REGM4XEN bit * omap4_dpll_regm4xen_recalc - compute DPLL rate, considering REGM4XEN bit
* @clk: struct clk * of the DPLL to compute the rate for * @clk: struct clk * of the DPLL to compute the rate for
...@@ -130,7 +164,6 @@ long omap4_dpll_regm4xen_round_rate(struct clk_hw *hw, ...@@ -130,7 +164,6 @@ long omap4_dpll_regm4xen_round_rate(struct clk_hw *hw,
unsigned long *parent_rate) unsigned long *parent_rate)
{ {
struct clk_hw_omap *clk = to_clk_hw_omap(hw); struct clk_hw_omap *clk = to_clk_hw_omap(hw);
u32 v;
struct dpll_data *dd; struct dpll_data *dd;
long r; long r;
...@@ -139,18 +172,31 @@ long omap4_dpll_regm4xen_round_rate(struct clk_hw *hw, ...@@ -139,18 +172,31 @@ long omap4_dpll_regm4xen_round_rate(struct clk_hw *hw,
dd = clk->dpll_data; dd = clk->dpll_data;
/* regm4xen adds a multiplier of 4 to DPLL calculations */ dd->last_rounded_m4xen = 0;
v = __raw_readl(dd->control_reg) & OMAP4430_DPLL_REGM4XEN_MASK;
if (v)
target_rate = target_rate / OMAP4430_REGM4XEN_MULT;
/*
* First try to compute the DPLL configuration for
* target rate without using the 4X multiplier.
*/
r = omap2_dpll_round_rate(hw, target_rate, NULL); r = omap2_dpll_round_rate(hw, target_rate, NULL);
if (r != ~0)
goto out;
/*
* If we did not find a valid DPLL configuration, try again, but
* this time see if using the 4X multiplier can help. Enabling the
* 4X multiplier is equivalent to dividing the target rate by 4.
*/
r = omap2_dpll_round_rate(hw, target_rate / OMAP4430_REGM4XEN_MULT,
NULL);
if (r == ~0) if (r == ~0)
return r; return r;
if (v) dd->last_rounded_rate *= OMAP4430_REGM4XEN_MULT;
clk->dpll_data->last_rounded_rate *= OMAP4430_REGM4XEN_MULT; dd->last_rounded_m4xen = 1;
out:
omap4_dpll_lpmode_recalc(dd);
return clk->dpll_data->last_rounded_rate; return dd->last_rounded_rate;
} }
...@@ -135,10 +135,7 @@ static int __init _omap_mux_init_gpio(struct omap_mux_partition *partition, ...@@ -135,10 +135,7 @@ static int __init _omap_mux_init_gpio(struct omap_mux_partition *partition,
old_mode = omap_mux_read(partition, gpio_mux->reg_offset); old_mode = omap_mux_read(partition, gpio_mux->reg_offset);
mux_mode = val & ~(OMAP_MUX_NR_MODES - 1); mux_mode = val & ~(OMAP_MUX_NR_MODES - 1);
if (partition->flags & OMAP_MUX_GPIO_IN_MODE3) mux_mode |= partition->gpio;
mux_mode |= OMAP_MUX_MODE3;
else
mux_mode |= OMAP_MUX_MODE4;
pr_debug("%s: Setting signal %s.gpio%i 0x%04x -> 0x%04x\n", __func__, pr_debug("%s: Setting signal %s.gpio%i 0x%04x -> 0x%04x\n", __func__,
gpio_mux->muxnames[0], gpio, old_mode, mux_mode); gpio_mux->muxnames[0], gpio, old_mode, mux_mode);
omap_mux_write(partition, mux_mode, gpio_mux->reg_offset); omap_mux_write(partition, mux_mode, gpio_mux->reg_offset);
...@@ -800,7 +797,7 @@ int __init omap_mux_late_init(void) ...@@ -800,7 +797,7 @@ int __init omap_mux_late_init(void)
struct omap_mux *m = &e->mux; struct omap_mux *m = &e->mux;
u16 mode = omap_mux_read(partition, m->reg_offset); u16 mode = omap_mux_read(partition, m->reg_offset);
if (OMAP_MODE_GPIO(mode)) if (OMAP_MODE_GPIO(partition, mode))
continue; continue;
#ifndef CONFIG_DEBUG_FS #ifndef CONFIG_DEBUG_FS
...@@ -1065,7 +1062,7 @@ static void __init omap_mux_init_list(struct omap_mux_partition *partition, ...@@ -1065,7 +1062,7 @@ static void __init omap_mux_init_list(struct omap_mux_partition *partition,
} }
#else #else
/* Skip pins that are not muxed as GPIO by bootloader */ /* Skip pins that are not muxed as GPIO by bootloader */
if (!OMAP_MODE_GPIO(omap_mux_read(partition, if (!OMAP_MODE_GPIO(partition, omap_mux_read(partition,
superset->reg_offset))) { superset->reg_offset))) {
superset++; superset++;
continue; continue;
...@@ -1132,6 +1129,7 @@ int __init omap_mux_init(const char *name, u32 flags, ...@@ -1132,6 +1129,7 @@ int __init omap_mux_init(const char *name, u32 flags,
partition->name = name; partition->name = name;
partition->flags = flags; partition->flags = flags;
partition->gpio = flags & OMAP_MUX_MODE7;
partition->size = mux_size; partition->size = mux_size;
partition->phys = mux_pbase; partition->phys = mux_pbase;
partition->base = ioremap(mux_pbase, mux_size); partition->base = ioremap(mux_pbase, mux_size);
......
...@@ -58,7 +58,8 @@ ...@@ -58,7 +58,8 @@
#define OMAP_PIN_OFF_INPUT_PULLDOWN (OMAP_OFF_EN | OMAP_OFF_PULL_EN) #define OMAP_PIN_OFF_INPUT_PULLDOWN (OMAP_OFF_EN | OMAP_OFF_PULL_EN)
#define OMAP_PIN_OFF_WAKEUPENABLE OMAP_WAKEUP_EN #define OMAP_PIN_OFF_WAKEUPENABLE OMAP_WAKEUP_EN
#define OMAP_MODE_GPIO(x) (((x) & OMAP_MUX_MODE7) == OMAP_MUX_MODE4) #define OMAP_MODE_GPIO(partition, x) (((x) & OMAP_MUX_MODE7) == \
partition->gpio)
#define OMAP_MODE_UART(x) (((x) & OMAP_MUX_MODE7) == OMAP_MUX_MODE0) #define OMAP_MODE_UART(x) (((x) & OMAP_MUX_MODE7) == OMAP_MUX_MODE0)
/* Flags for omapX_mux_init */ /* Flags for omapX_mux_init */
...@@ -79,13 +80,20 @@ ...@@ -79,13 +80,20 @@
/* /*
* omap_mux_init flags definition: * omap_mux_init flags definition:
* *
* OMAP_GPIO_MUX_MODE, bits 0-2: gpio muxing mode, same like pad control
* register which includes values from 0-7.
* OMAP_MUX_REG_8BIT: Ensure that access to padconf is done in 8 bits. * OMAP_MUX_REG_8BIT: Ensure that access to padconf is done in 8 bits.
* The default value is 16 bits. * The default value is 16 bits.
* OMAP_MUX_GPIO_IN_MODE3: The GPIO is selected in mode3.
* The default is mode4.
*/ */
#define OMAP_MUX_REG_8BIT (1 << 0) #define OMAP_MUX_GPIO_IN_MODE0 OMAP_MUX_MODE0
#define OMAP_MUX_GPIO_IN_MODE3 (1 << 1) #define OMAP_MUX_GPIO_IN_MODE1 OMAP_MUX_MODE1
#define OMAP_MUX_GPIO_IN_MODE2 OMAP_MUX_MODE2
#define OMAP_MUX_GPIO_IN_MODE3 OMAP_MUX_MODE3
#define OMAP_MUX_GPIO_IN_MODE4 OMAP_MUX_MODE4
#define OMAP_MUX_GPIO_IN_MODE5 OMAP_MUX_MODE5
#define OMAP_MUX_GPIO_IN_MODE6 OMAP_MUX_MODE6
#define OMAP_MUX_GPIO_IN_MODE7 OMAP_MUX_MODE7
#define OMAP_MUX_REG_8BIT (1 << 3)
/** /**
* struct omap_board_data - board specific device data * struct omap_board_data - board specific device data
...@@ -105,6 +113,7 @@ struct omap_board_data { ...@@ -105,6 +113,7 @@ struct omap_board_data {
* struct mux_partition - contain partition related information * struct mux_partition - contain partition related information
* @name: name of the current partition * @name: name of the current partition
* @flags: flags specific to this partition * @flags: flags specific to this partition
* @gpio: gpio mux mode
* @phys: physical address * @phys: physical address
* @size: partition size * @size: partition size
* @base: virtual address after ioremap * @base: virtual address after ioremap
...@@ -114,6 +123,7 @@ struct omap_board_data { ...@@ -114,6 +123,7 @@ struct omap_board_data {
struct omap_mux_partition { struct omap_mux_partition {
const char *name; const char *name;
u32 flags; u32 flags;
u32 gpio;
u32 phys; u32 phys;
u32 size; u32 size;
void __iomem *base; void __iomem *base;
......
...@@ -2053,7 +2053,7 @@ int __init omap3_mux_init(struct omap_board_mux *board_subset, int flags) ...@@ -2053,7 +2053,7 @@ int __init omap3_mux_init(struct omap_board_mux *board_subset, int flags)
return -EINVAL; return -EINVAL;
} }
return omap_mux_init("core", 0, return omap_mux_init("core", OMAP_MUX_GPIO_IN_MODE4,
OMAP3_CONTROL_PADCONF_MUX_PBASE, OMAP3_CONTROL_PADCONF_MUX_PBASE,
OMAP3_CONTROL_PADCONF_MUX_SIZE, OMAP3_CONTROL_PADCONF_MUX_SIZE,
omap3_muxmodes, package_subset, board_subset, omap3_muxmodes, package_subset, board_subset,
......
...@@ -27,8 +27,7 @@ ...@@ -27,8 +27,7 @@
#include <linux/pm_runtime.h> #include <linux/pm_runtime.h>
#include <linux/console.h> #include <linux/console.h>
#include <linux/omap-dma.h> #include <linux/omap-dma.h>
#include <linux/platform_data/serial-omap.h>
#include <plat/omap-serial.h>
#include "common.h" #include "common.h"
#include "omap_hwmod.h" #include "omap_hwmod.h"
......
...@@ -190,7 +190,7 @@ static struct device_node * __init omap_get_timer_dt(struct of_device_id *match, ...@@ -190,7 +190,7 @@ static struct device_node * __init omap_get_timer_dt(struct of_device_id *match,
* kernel registering these devices remove them dynamically from the device * kernel registering these devices remove them dynamically from the device
* tree on boot. * tree on boot.
*/ */
void __init omap_dmtimer_init(void) static void __init omap_dmtimer_init(void)
{ {
struct device_node *np; struct device_node *np;
...@@ -210,7 +210,7 @@ void __init omap_dmtimer_init(void) ...@@ -210,7 +210,7 @@ void __init omap_dmtimer_init(void)
* *
* Get the timer errata flags that are specific to the OMAP device being used. * Get the timer errata flags that are specific to the OMAP device being used.
*/ */
u32 __init omap_dm_timer_get_errata(void) static u32 __init omap_dm_timer_get_errata(void)
{ {
if (cpu_is_omap24xx()) if (cpu_is_omap24xx())
return 0; return 0;
...@@ -392,7 +392,7 @@ static struct of_device_id omap_counter_match[] __initdata = { ...@@ -392,7 +392,7 @@ static struct of_device_id omap_counter_match[] __initdata = {
}; };
/* Setup free-running counter for clocksource */ /* Setup free-running counter for clocksource */
static int __init omap2_sync32k_clocksource_init(void) static int __init __maybe_unused omap2_sync32k_clocksource_init(void)
{ {
int ret; int ret;
struct device_node *np = NULL; struct device_node *np = NULL;
......
...@@ -508,6 +508,10 @@ void __init usbhs_init(const struct usbhs_omap_board_data *pdata) ...@@ -508,6 +508,10 @@ void __init usbhs_init(const struct usbhs_omap_board_data *pdata)
if (cpu_is_omap34xx()) { if (cpu_is_omap34xx()) {
setup_ehci_io_mux(pdata->port_mode); setup_ehci_io_mux(pdata->port_mode);
setup_ohci_io_mux(pdata->port_mode); setup_ohci_io_mux(pdata->port_mode);
if (omap_rev() <= OMAP3430_REV_ES2_1)
usbhs_data.single_ulpi_bypass = true;
} else if (cpu_is_omap44xx()) { } else if (cpu_is_omap44xx()) {
setup_4430ehci_io_mux(pdata->port_mode); setup_4430ehci_io_mux(pdata->port_mode);
setup_4430ohci_io_mux(pdata->port_mode); setup_4430ohci_io_mux(pdata->port_mode);
......
...@@ -104,7 +104,7 @@ static __initdata struct tegra_clk_init_table tegra20_clk_init_table[] = { ...@@ -104,7 +104,7 @@ static __initdata struct tegra_clk_init_table tegra20_clk_init_table[] = {
static __initdata struct tegra_clk_init_table tegra30_clk_init_table[] = { static __initdata struct tegra_clk_init_table tegra30_clk_init_table[] = {
/* name parent rate enabled */ /* name parent rate enabled */
{ "clk_m", NULL, 0, true }, { "clk_m", NULL, 0, true },
{ "pll_p", "clk_m", 408000000, true }, { "pll_p", "pll_ref", 408000000, true },
{ "pll_p_out1", "pll_p", 9600000, true }, { "pll_p_out1", "pll_p", 9600000, true },
{ "pll_p_out4", "pll_p", 102000000, true }, { "pll_p_out4", "pll_p", 102000000, true },
{ "sclk", "pll_p_out4", 102000000, true }, { "sclk", "pll_p_out4", 102000000, true },
......
...@@ -2045,9 +2045,7 @@ struct clk_ops tegra30_periph_clk_ops = { ...@@ -2045,9 +2045,7 @@ struct clk_ops tegra30_periph_clk_ops = {
static int tegra30_dsib_clk_set_parent(struct clk_hw *hw, u8 index) static int tegra30_dsib_clk_set_parent(struct clk_hw *hw, u8 index)
{ {
struct clk *d = clk_get_sys(NULL, "pll_d"); struct clk *d = clk_get_sys(NULL, "pll_d");
/* The DSIB parent selection bit is in PLLD base /* The DSIB parent selection bit is in PLLD base register */
register - can not do direct r-m-w, must be
protected by PLLD lock */
tegra_clk_cfg_ex( tegra_clk_cfg_ex(
d, TEGRA_CLK_PLLD_MIPI_MUX_SEL, index); d, TEGRA_CLK_PLLD_MIPI_MUX_SEL, index);
......
...@@ -27,7 +27,6 @@ ...@@ -27,7 +27,6 @@
#include <linux/mtd/nand.h> #include <linux/mtd/nand.h>
#include <linux/mtd/fsmc.h> #include <linux/mtd/fsmc.h>
#include <linux/pinctrl/machine.h> #include <linux/pinctrl/machine.h>
#include <linux/pinctrl/consumer.h>
#include <linux/pinctrl/pinconf-generic.h> #include <linux/pinctrl/pinconf-generic.h>
#include <linux/dma-mapping.h> #include <linux/dma-mapping.h>
#include <linux/platform_data/clk-u300.h> #include <linux/platform_data/clk-u300.h>
...@@ -1553,39 +1552,6 @@ static struct pinctrl_map __initdata u300_pinmux_map[] = { ...@@ -1553,39 +1552,6 @@ static struct pinctrl_map __initdata u300_pinmux_map[] = {
pin_highz_conf), pin_highz_conf),
}; };
struct u300_mux_hog {
struct device *dev;
struct pinctrl *p;
};
static struct u300_mux_hog u300_mux_hogs[] = {
{
.dev = &uart0_device.dev,
},
{
.dev = &mmcsd_device.dev,
},
};
static int __init u300_pinctrl_fetch(void)
{
int i;
for (i = 0; i < ARRAY_SIZE(u300_mux_hogs); i++) {
struct pinctrl *p;
p = pinctrl_get_select_default(u300_mux_hogs[i].dev);
if (IS_ERR(p)) {
pr_err("u300: could not get pinmux hog for dev %s\n",
dev_name(u300_mux_hogs[i].dev));
continue;
}
u300_mux_hogs[i].p = p;
}
return 0;
}
subsys_initcall(u300_pinctrl_fetch);
/* /*
* Notice that AMBA devices are initialized before platform devices. * Notice that AMBA devices are initialized before platform devices.
* *
......
...@@ -8,6 +8,7 @@ ...@@ -8,6 +8,7 @@
#ifndef __DEVICES_DB8500_H #ifndef __DEVICES_DB8500_H
#define __DEVICES_DB8500_H #define __DEVICES_DB8500_H
#include <linux/platform_data/usb-musb-ux500.h>
#include <mach/irqs.h> #include <mach/irqs.h>
#include "devices-common.h" #include "devices-common.h"
......
...@@ -11,7 +11,6 @@ obj- := ...@@ -11,7 +11,6 @@ obj- :=
# omap_device support (OMAP2+ only at the moment) # omap_device support (OMAP2+ only at the moment)
obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o
obj-$(CONFIG_OMAP_DEBUG_DEVICES) += debug-devices.o
obj-$(CONFIG_OMAP_DEBUG_LEDS) += debug-leds.o obj-$(CONFIG_OMAP_DEBUG_LEDS) += debug-leds.o
i2c-omap-$(CONFIG_I2C_OMAP) := i2c.o i2c-omap-$(CONFIG_I2C_OMAP) := i2c.o
obj-y += $(i2c-omap-m) $(i2c-omap-y) obj-y += $(i2c-omap-m) $(i2c-omap-y)
......
/*
* linux/arch/arm/plat-omap/debug-devices.c
*
* Copyright (C) 2005 Nokia Corporation
* Modified from mach-omap2/board-h4.c
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/smc91x.h>
#include <plat/debug-devices.h>
/* Many OMAP development platforms reuse the same "debug board"; these
* platforms include H2, H3, H4, and Perseus2.
*/
static struct smc91x_platdata smc91x_info = {
.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
.leda = RPC_LED_100_10,
.ledb = RPC_LED_TX_RX,
};
static struct resource smc91x_resources[] = {
[0] = {
.flags = IORESOURCE_MEM,
},
[1] = {
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
},
};
static struct platform_device smc91x_device = {
.name = "smc91x",
.id = -1,
.dev = {
.platform_data = &smc91x_info,
},
.num_resources = ARRAY_SIZE(smc91x_resources),
.resource = smc91x_resources,
};
static struct resource led_resources[] = {
[0] = {
.flags = IORESOURCE_MEM,
},
};
static struct platform_device led_device = {
.name = "omap_dbg_led",
.id = -1,
.num_resources = ARRAY_SIZE(led_resources),
.resource = led_resources,
};
static struct platform_device *debug_devices[] __initdata = {
&smc91x_device,
&led_device,
/* ps2 kbd + mouse ports */
/* 4 extra uarts */
/* 6 input dip switches */
/* 8 output pins */
};
int __init debug_card_init(u32 addr, unsigned gpio)
{
int status;
smc91x_resources[0].start = addr + 0x300;
smc91x_resources[0].end = addr + 0x30f;
smc91x_resources[1].start = gpio_to_irq(gpio);
smc91x_resources[1].end = gpio_to_irq(gpio);
status = gpio_request(gpio, "SMC91x irq");
if (status < 0) {
printk(KERN_ERR "GPIO%d unavailable for smc91x IRQ\n", gpio);
return status;
}
gpio_direction_input(gpio);
led_resources[0].start = addr;
led_resources[0].end = addr + SZ_4K - 1;
return platform_add_devices(debug_devices, ARRAY_SIZE(debug_devices));
}
/* for TI reference platforms sharing the same debug card */
extern int debug_card_init(u32 addr, unsigned gpio);
...@@ -157,6 +157,7 @@ int tegra_ahb_enable_smmu(struct device_node *dn) ...@@ -157,6 +157,7 @@ int tegra_ahb_enable_smmu(struct device_node *dn)
EXPORT_SYMBOL(tegra_ahb_enable_smmu); EXPORT_SYMBOL(tegra_ahb_enable_smmu);
#endif #endif
#ifdef CONFIG_PM_SLEEP
static int tegra_ahb_suspend(struct device *dev) static int tegra_ahb_suspend(struct device *dev)
{ {
int i; int i;
...@@ -176,6 +177,7 @@ static int tegra_ahb_resume(struct device *dev) ...@@ -176,6 +177,7 @@ static int tegra_ahb_resume(struct device *dev)
gizmo_writel(ahb, ahb->ctx[i], tegra_ahb_gizmo[i]); gizmo_writel(ahb, ahb->ctx[i], tegra_ahb_gizmo[i]);
return 0; return 0;
} }
#endif
static UNIVERSAL_DEV_PM_OPS(tegra_ahb_pm, static UNIVERSAL_DEV_PM_OPS(tegra_ahb_pm,
tegra_ahb_suspend, tegra_ahb_suspend,
......
...@@ -25,7 +25,6 @@ ...@@ -25,7 +25,6 @@
#include <linux/dma-mapping.h> #include <linux/dma-mapping.h>
#include <linux/spinlock.h> #include <linux/spinlock.h>
#include <linux/gpio.h> #include <linux/gpio.h>
#include <plat/cpu.h>
#include <linux/platform_device.h> #include <linux/platform_device.h>
#include <linux/platform_data/usb-omap.h> #include <linux/platform_data/usb-omap.h>
#include <linux/pm_runtime.h> #include <linux/pm_runtime.h>
...@@ -384,7 +383,7 @@ static void omap_usbhs_init(struct device *dev) ...@@ -384,7 +383,7 @@ static void omap_usbhs_init(struct device *dev)
reg &= ~OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS; reg &= ~OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS;
/* Bypass the TLL module for PHY mode operation */ /* Bypass the TLL module for PHY mode operation */
if (cpu_is_omap3430() && (omap_rev() <= OMAP3430_REV_ES2_1)) { if (pdata->single_ulpi_bypass) {
dev_dbg(dev, "OMAP3 ES version <= ES2.1\n"); dev_dbg(dev, "OMAP3 ES version <= ES2.1\n");
if (is_ehci_phy_mode(pdata->port_mode[0]) || if (is_ehci_phy_mode(pdata->port_mode[0]) ||
is_ehci_phy_mode(pdata->port_mode[1]) || is_ehci_phy_mode(pdata->port_mode[1]) ||
......
...@@ -41,8 +41,7 @@ ...@@ -41,8 +41,7 @@
#include <linux/of.h> #include <linux/of.h>
#include <linux/gpio.h> #include <linux/gpio.h>
#include <linux/pinctrl/consumer.h> #include <linux/pinctrl/consumer.h>
#include <linux/platform_data/serial-omap.h>
#include <plat/omap-serial.h>
#define OMAP_MAX_HSUART_PORTS 6 #define OMAP_MAX_HSUART_PORTS 6
......
...@@ -59,6 +59,9 @@ struct usbhs_omap_platform_data { ...@@ -59,6 +59,9 @@ struct usbhs_omap_platform_data {
struct ehci_hcd_omap_platform_data *ehci_data; struct ehci_hcd_omap_platform_data *ehci_data;
struct ohci_hcd_omap_platform_data *ohci_data; struct ohci_hcd_omap_platform_data *ohci_data;
/* OMAP3 <= ES2.1 have a single ulpi bypass control bit */
unsigned single_ulpi_bypass:1;
}; };
/*-------------------------------------------------------------------------*/ /*-------------------------------------------------------------------------*/
......
...@@ -28,7 +28,7 @@ struct omap_dss_device; ...@@ -28,7 +28,7 @@ struct omap_dss_device;
* @power_down_gpio: gpio number for PD pin (or -1 if not available) * @power_down_gpio: gpio number for PD pin (or -1 if not available)
*/ */
struct tfp410_platform_data { struct tfp410_platform_data {
u16 i2c_bus_num; int i2c_bus_num;
int power_down_gpio; int power_down_gpio;
}; };
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment