Commit 202b9808 authored by Neil Armstrong's avatar Neil Armstrong

drm/meson: Add G12A Video Clock setup

While switching to the Common Clock Framework is still Work In Progress,
this patch adds the corresponding G12A HDMI PLL setup to be on-par
with the other SoCs support.

The G12A has only a single tweak about the high frequency setup,
where the HDMI PLL needs a specific setup to handle correctly the
5.94GHz DCO frequency.

Apart that, it handls ecorrectly all the other HDMI frequencies
and can achieve even better DMT clock frequency precision with
the larger fractional dividier width.
Signed-off-by: default avatarNeil Armstrong <narmstrong@baylibre.com>
Tested-by: default avatarJerome Brunet <jbrunet@baylibre.com>
Reviewed-by: default avatarJerome Brunet <jbrunet@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190325141824.21259-10-narmstrong@baylibre.com
parent 64d598a1
......@@ -113,9 +113,12 @@
#define HHI_HDMI_PLL_CNTL4 0x32C /* 0xcb offset in data sheet */
#define HHI_HDMI_PLL_CNTL5 0x330 /* 0xcc offset in data sheet */
#define HHI_HDMI_PLL_CNTL6 0x334 /* 0xcd offset in data sheet */
#define HHI_HDMI_PLL_CNTL7 0x338 /* 0xce offset in data sheet */
#define HDMI_PLL_RESET BIT(28)
#define HDMI_PLL_RESET_G12A BIT(29)
#define HDMI_PLL_LOCK BIT(31)
#define HDMI_PLL_LOCK_G12A (3 << 30)
#define FREQ_1000_1001(_freq) DIV_ROUND_CLOSEST(_freq * 1000, 1001)
......@@ -257,6 +260,10 @@ static void meson_venci_cvbs_clock_config(struct meson_drm *priv)
regmap_write(priv->hhi, HHI_HDMI_PLL_CNTL5, 0x71486980);
regmap_write(priv->hhi, HHI_HDMI_PLL_CNTL6, 0x00000e55);
regmap_write(priv->hhi, HHI_HDMI_PLL_CNTL, 0x4800023d);
/* Poll for lock bit */
regmap_read_poll_timeout(priv->hhi, HHI_HDMI_PLL_CNTL, val,
(val & HDMI_PLL_LOCK), 10, 0);
} else if (meson_vpu_is_compatible(priv, "amlogic,meson-gxm-vpu") ||
meson_vpu_is_compatible(priv, "amlogic,meson-gxl-vpu")) {
regmap_write(priv->hhi, HHI_HDMI_PLL_CNTL, 0x4000027b);
......@@ -271,11 +278,26 @@ static void meson_venci_cvbs_clock_config(struct meson_drm *priv)
HDMI_PLL_RESET, HDMI_PLL_RESET);
regmap_update_bits(priv->hhi, HHI_HDMI_PLL_CNTL,
HDMI_PLL_RESET, 0);
}
/* Poll for lock bit */
regmap_read_poll_timeout(priv->hhi, HHI_HDMI_PLL_CNTL, val,
(val & HDMI_PLL_LOCK), 10, 0);
} else if (meson_vpu_is_compatible(priv, "amlogic,meson-g12a-vpu")) {
regmap_write(priv->hhi, HHI_HDMI_PLL_CNTL, 0x1a0504f7);
regmap_write(priv->hhi, HHI_HDMI_PLL_CNTL2, 0x00010000);
regmap_write(priv->hhi, HHI_HDMI_PLL_CNTL3, 0x00000000);
regmap_write(priv->hhi, HHI_HDMI_PLL_CNTL4, 0x6a28dc00);
regmap_write(priv->hhi, HHI_HDMI_PLL_CNTL5, 0x65771290);
regmap_write(priv->hhi, HHI_HDMI_PLL_CNTL6, 0x39272000);
regmap_write(priv->hhi, HHI_HDMI_PLL_CNTL7, 0x56540000);
regmap_write(priv->hhi, HHI_HDMI_PLL_CNTL, 0x3a0504f7);
regmap_write(priv->hhi, HHI_HDMI_PLL_CNTL, 0x1a0504f7);
/* Poll for lock bit */
regmap_read_poll_timeout(priv->hhi, HHI_HDMI_PLL_CNTL, val,
((val & HDMI_PLL_LOCK_G12A) == HDMI_PLL_LOCK_G12A),
10, 0);
}
/* Disable VCLK2 */
regmap_update_bits(priv->hhi, HHI_VIID_CLK_CNTL, VCLK2_EN, 0);
......@@ -288,8 +310,13 @@ static void meson_venci_cvbs_clock_config(struct meson_drm *priv)
VCLK2_DIV_MASK, (55 - 1));
/* select vid_pll for vclk2 */
if (meson_vpu_is_compatible(priv, "amlogic,meson-g12a-vpu"))
regmap_update_bits(priv->hhi, HHI_VIID_CLK_CNTL,
VCLK2_SEL_MASK, (0 << VCLK2_SEL_SHIFT));
else
regmap_update_bits(priv->hhi, HHI_VIID_CLK_CNTL,
VCLK2_SEL_MASK, (4 << VCLK2_SEL_SHIFT));
/* enable vclk2 gate */
regmap_update_bits(priv->hhi, HHI_VIID_CLK_CNTL, VCLK2_EN, VCLK2_EN);
......@@ -476,6 +503,46 @@ void meson_hdmi_pll_set_params(struct meson_drm *priv, unsigned int m,
/* Poll for lock bit */
regmap_read_poll_timeout(priv->hhi, HHI_HDMI_PLL_CNTL, val,
(val & HDMI_PLL_LOCK), 10, 0);
} else if (meson_vpu_is_compatible(priv, "amlogic,meson-g12a-vpu")) {
regmap_write(priv->hhi, HHI_HDMI_PLL_CNTL, 0x0b3a0400 | m);
/* Enable and reset */
regmap_update_bits(priv->hhi, HHI_HDMI_PLL_CNTL,
0x3 << 28, 0x3 << 28);
regmap_write(priv->hhi, HHI_HDMI_PLL_CNTL2, frac);
regmap_write(priv->hhi, HHI_HDMI_PLL_CNTL3, 0x00000000);
/* G12A HDMI PLL Needs specific parameters for 5.4GHz */
if (m >= 0xf7) {
regmap_write(priv->hhi, HHI_HDMI_PLL_CNTL4, 0xea68dc00);
regmap_write(priv->hhi, HHI_HDMI_PLL_CNTL5, 0x65771290);
regmap_write(priv->hhi, HHI_HDMI_PLL_CNTL6, 0x39272000);
regmap_write(priv->hhi, HHI_HDMI_PLL_CNTL7, 0x55540000);
} else {
regmap_write(priv->hhi, HHI_HDMI_PLL_CNTL4, 0x0a691c00);
regmap_write(priv->hhi, HHI_HDMI_PLL_CNTL5, 0x33771290);
regmap_write(priv->hhi, HHI_HDMI_PLL_CNTL6, 0x39270000);
regmap_write(priv->hhi, HHI_HDMI_PLL_CNTL7, 0x50540000);
}
do {
/* Reset PLL */
regmap_update_bits(priv->hhi, HHI_HDMI_PLL_CNTL,
HDMI_PLL_RESET_G12A, HDMI_PLL_RESET_G12A);
/* UN-Reset PLL */
regmap_update_bits(priv->hhi, HHI_HDMI_PLL_CNTL,
HDMI_PLL_RESET_G12A, 0);
/* Poll for lock bits */
if (!regmap_read_poll_timeout(priv->hhi,
HHI_HDMI_PLL_CNTL, val,
((val & HDMI_PLL_LOCK_G12A)
== HDMI_PLL_LOCK_G12A),
10, 100))
break;
} while(1);
}
if (meson_vpu_is_compatible(priv, "amlogic,meson-gxbb-vpu"))
......@@ -485,6 +552,9 @@ void meson_hdmi_pll_set_params(struct meson_drm *priv, unsigned int m,
meson_vpu_is_compatible(priv, "amlogic,meson-gxl-vpu"))
regmap_update_bits(priv->hhi, HHI_HDMI_PLL_CNTL3,
3 << 21, pll_od_to_reg(od1) << 21);
else if (meson_vpu_is_compatible(priv, "amlogic,meson-g12a-vpu"))
regmap_update_bits(priv->hhi, HHI_HDMI_PLL_CNTL,
3 << 16, pll_od_to_reg(od1) << 16);
if (meson_vpu_is_compatible(priv, "amlogic,meson-gxbb-vpu"))
regmap_update_bits(priv->hhi, HHI_HDMI_PLL_CNTL2,
......@@ -493,6 +563,9 @@ void meson_hdmi_pll_set_params(struct meson_drm *priv, unsigned int m,
meson_vpu_is_compatible(priv, "amlogic,meson-gxl-vpu"))
regmap_update_bits(priv->hhi, HHI_HDMI_PLL_CNTL3,
3 << 23, pll_od_to_reg(od2) << 23);
else if (meson_vpu_is_compatible(priv, "amlogic,meson-g12a-vpu"))
regmap_update_bits(priv->hhi, HHI_HDMI_PLL_CNTL,
3 << 18, pll_od_to_reg(od2) << 18);
if (meson_vpu_is_compatible(priv, "amlogic,meson-gxbb-vpu"))
regmap_update_bits(priv->hhi, HHI_HDMI_PLL_CNTL2,
......@@ -501,7 +574,9 @@ void meson_hdmi_pll_set_params(struct meson_drm *priv, unsigned int m,
meson_vpu_is_compatible(priv, "amlogic,meson-gxl-vpu"))
regmap_update_bits(priv->hhi, HHI_HDMI_PLL_CNTL3,
3 << 19, pll_od_to_reg(od3) << 19);
else if (meson_vpu_is_compatible(priv, "amlogic,meson-g12a-vpu"))
regmap_update_bits(priv->hhi, HHI_HDMI_PLL_CNTL,
3 << 20, pll_od_to_reg(od3) << 20);
}
#define XTAL_FREQ 24000
......@@ -518,6 +593,7 @@ static unsigned int meson_hdmi_pll_get_m(struct meson_drm *priv,
#define HDMI_FRAC_MAX_GXBB 4096
#define HDMI_FRAC_MAX_GXL 1024
#define HDMI_FRAC_MAX_G12A 131072
static unsigned int meson_hdmi_pll_get_frac(struct meson_drm *priv,
unsigned int m,
......@@ -534,6 +610,9 @@ static unsigned int meson_hdmi_pll_get_frac(struct meson_drm *priv,
parent_freq *= 2;
}
if (meson_vpu_is_compatible(priv, "amlogic,meson-g12a-vpu"))
frac_max = HDMI_FRAC_MAX_G12A;
/* We can have a perfect match !*/
if (pll_freq / m == parent_freq &&
pll_freq % m == 0)
......@@ -559,7 +638,8 @@ static bool meson_hdmi_pll_validate_params(struct meson_drm *priv,
if (frac >= HDMI_FRAC_MAX_GXBB)
return false;
} else if (meson_vpu_is_compatible(priv, "amlogic,meson-gxm-vpu") ||
meson_vpu_is_compatible(priv, "amlogic,meson-gxl-vpu")) {
meson_vpu_is_compatible(priv, "amlogic,meson-gxl-vpu") ||
meson_vpu_is_compatible(priv, "amlogic,meson-g12a-vpu")) {
/* Empiric supported min/max dividers */
if (m < 106 || m > 247)
return false;
......@@ -713,6 +793,23 @@ static void meson_vclk_set(struct meson_drm *priv, unsigned int pll_base_freq,
break;
}
meson_hdmi_pll_set_params(priv, m, frac, od1, od2, od3);
} else if (meson_vpu_is_compatible(priv, "amlogic,meson-g12a-vpu")) {
switch (pll_base_freq) {
case 2970000:
m = 0x7b;
frac = vic_alternate_clock ? 0x140b4 : 0x18000;
break;
case 4320000:
m = vic_alternate_clock ? 0xb3 : 0xb4;
frac = vic_alternate_clock ? 0x1a3ee : 0;
break;
case 5940000:
m = 0xf7;
frac = vic_alternate_clock ? 0x8148 : 0x10000;
break;
}
meson_hdmi_pll_set_params(priv, m, frac, od1, od2, od3);
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment