Commit 2097abcb authored by Alberto Panizzo's avatar Alberto Panizzo Committed by Sascha Hauer

Armadillo500 Add support for Seiko Instruments S-35390A rtc over i2c.

The RTC chip Seiko Instruments S-35390A is connected to the Application
Processor over the second bus i2c with the hard coded address 0x30.
Signed-off-by: default avatarAlberto Panizzo <maramaopercheseimorto@gmail.com>
Signed-off-by: default avatarSascha Hauer <s.hauer@pengutronix.de>
parent e9a6c5d0
......@@ -35,6 +35,7 @@
#include <linux/io.h>
#include <linux/input.h>
#include <linux/gpio_keys.h>
#include <linux/i2c.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
......@@ -104,6 +105,13 @@ static int armadillo5x0_pins[] = {
MX31_PIN_CSPI2_MISO__SDA,
};
/* RTC over I2C*/
#define ARMADILLO5X0_RTC_GPIO IOMUX_TO_GPIO(MX31_PIN_SRXD4)
static struct i2c_board_info armadillo5x0_i2c_rtc = {
I2C_BOARD_INFO("s35390a", 0x30),
};
/* GPIO BUTTONS */
static struct gpio_keys_button armadillo5x0_buttons[] = {
{
......@@ -373,6 +381,18 @@ static void __init armadillo5x0_init(void)
/* set NAND page size to 2k if not configured via boot mode pins */
__raw_writel(__raw_readl(MXC_CCM_RCSR) | (1 << 30), MXC_CCM_RCSR);
/* RTC */
/* Get RTC IRQ and register the chip */
if (gpio_request(ARMADILLO5X0_RTC_GPIO, "rtc") == 0) {
if (gpio_direction_input(ARMADILLO5X0_RTC_GPIO) == 0)
armadillo5x0_i2c_rtc.irq = gpio_to_irq(ARMADILLO5X0_RTC_GPIO);
else
gpio_free(ARMADILLO5X0_RTC_GPIO);
}
if (armadillo5x0_i2c_rtc.irq == 0)
pr_warning("armadillo5x0_init: failed to get RTC IRQ\n");
i2c_register_board_info(1, &armadillo5x0_i2c_rtc, 1);
}
static void __init armadillo5x0_timer_init(void)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment