Skip to content

L
linux
Commit 210bbd38 authored by Caesar Wang's avatar Caesar Wang Committed by Heiko Stuebner
Browse files
Options

arm64: dts: rockchip: change all interrupts cells to 4 on rk3399 SoCs 

Add the interrupts cells value for 4, and the 4th cell is zero.

Due to the doc[0] said:" the system requires describing PPI affinity,
then the value must be at least 4"
The 4th cell is a phandle to a node describing a set of CPUs this
interrupt is affine to. The interrupt must be a PPI, and the node
pointed must be a subnode of the "ppi-partitions" subnode. For
interrupt types other than PPI or PPIs that are not partitionned,
this cell must be zero. See the "ppi-partitions" node description
below.

[0]:
Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt
Signed-off-by: default avatarCaesar Wang <wxt@rock-chips.com>
Acked-by: default avatarMark Rutland <mark.rutland@arm.com>
Signed-off-by: default avatarHeiko Stuebner <heiko@sntech.de>
parent 4a3a3d32
Hide whitespace changes
Inline Side-by-side
Showing with 52 additions and 52 deletions
arch/arm64/boot/dts/rockchip/rk3399.dtsi
View file @ 210bbd38
......@@ -160,10 +160,10 @@ psci {
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
<GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
<GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
<GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW 0>,
<GIC_PPI 14 IRQ_TYPE_LEVEL_LOW 0>,
<GIC_PPI 11 IRQ_TYPE_LEVEL_LOW 0>,
<GIC_PPI 10 IRQ_TYPE_LEVEL_LOW 0>;
};
xin24m: xin24m {
......@@ -182,8 +182,8 @@ amba {
dmac_bus: dma-controller@ff6d0000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x0 0xff6d0000 0x0 0x4000>;
interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH 0>,
<GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH 0>;
#dma-cells = <1>;
clocks = <&cru ACLK_DMAC0_PERILP>;
clock-names = "apb_pclk";
......@@ -192,8 +192,8 @@ dmac_bus: dma-controller@ff6d0000 {
dmac_peri: dma-controller@ff6e0000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x0 0xff6e0000 0x0 0x4000>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH 0>,
<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH 0>;
#dma-cells = <1>;
clocks = <&cru ACLK_DMAC1_PERILP>;
clock-names = "apb_pclk";
......@@ -204,7 +204,7 @@ sdio0: dwmmc@fe310000 {
compatible = "rockchip,rk3399-dw-mshc",
"rockchip,rk3288-dw-mshc";
reg = <0x0 0xfe310000 0x0 0x4000>;
interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH 0>;
clock-freq-min-max = <400000 150000000>;
clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
<&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
......@@ -217,7 +217,7 @@ sdmmc: dwmmc@fe320000 {
compatible = "rockchip,rk3399-dw-mshc",
"rockchip,rk3288-dw-mshc";
reg = <0x0 0xfe320000 0x0 0x4000>;
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH 0>;
clock-freq-min-max = <400000 150000000>;
clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
<&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
......@@ -229,7 +229,7 @@ sdmmc: dwmmc@fe320000 {
sdhci: sdhci@fe330000 {
compatible = "rockchip,rk3399-sdhci-5.1", "arasan,sdhci-5.1";
reg = <0x0 0xfe330000 0x0 0x10000>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH 0>;
arasan,soc-ctl-syscon = <&grf>;
assigned-clocks = <&cru SCLK_EMMC>;
assigned-clock-rates = <200000000>;
......@@ -284,7 +284,7 @@ pcie0_intc: interrupt-controller {
usb_host0_ehci: usb@fe380000 {
compatible = "generic-ehci";
reg = <0x0 0xfe380000 0x0 0x20000>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST0_ARB>;
clock-names = "hclk_host0", "hclk_host0_arb";
phys = <&u2phy0_host>;
......@@ -295,7 +295,7 @@ usb_host0_ehci: usb@fe380000 {
usb_host0_ohci: usb@fe3a0000 {
compatible = "generic-ohci";
reg = <0x0 0xfe3a0000 0x0 0x20000>;
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST0_ARB>;
clock-names = "hclk_host0", "hclk_host0_arb";
status = "disabled";
......@@ -304,7 +304,7 @@ usb_host0_ohci: usb@fe3a0000 {
usb_host1_ehci: usb@fe3c0000 {
compatible = "generic-ehci";
reg = <0x0 0xfe3c0000 0x0 0x20000>;
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST1_ARB>;
clock-names = "hclk_host1", "hclk_host1_arb";
phys = <&u2phy1_host>;
......@@ -315,7 +315,7 @@ usb_host1_ehci: usb@fe3c0000 {
usb_host1_ohci: usb@fe3e0000 {
compatible = "generic-ohci";
reg = <0x0 0xfe3e0000 0x0 0x20000>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST1_ARB>;
clock-names = "hclk_host1", "hclk_host1_arb";
status = "disabled";
......@@ -323,7 +323,7 @@ usb_host1_ohci: usb@fe3e0000 {
gic: interrupt-controller@fee00000 {
compatible = "arm,gic-v3";
#interrupt-cells = <3>;
#interrupt-cells = <4>;
#address-cells = <2>;
#size-cells = <2>;
ranges;
......@@ -334,7 +334,7 @@ gic: interrupt-controller@fee00000 {
<0x0 0xfff00000 0 0x10000>, /* GICC */
<0x0 0xfff10000 0 0x10000>, /* GICH */
<0x0 0xfff20000 0 0x10000>; /* GICV */
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
its: interrupt-controller@fee20000 {
compatible = "arm,gic-v3-its";
msi-controller;
......@@ -345,7 +345,7 @@ its: interrupt-controller@fee20000 {
saradc: saradc@ff100000 {
compatible = "rockchip,rk3399-saradc";
reg = <0x0 0xff100000 0x0 0x100>;
interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH 0>;
#io-channel-cells = <1>;
clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
clock-names = "saradc", "apb_pclk";
......@@ -361,7 +361,7 @@ i2c1: i2c@ff110000 {
assigned-clock-rates = <200000000>;
clocks = <&cru SCLK_I2C1>, <&cru PCLK_I2C1>;
clock-names = "i2c", "pclk";
interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH 0>;
pinctrl-names = "default";
pinctrl-0 = <&i2c1_xfer>;
#address-cells = <1>;
......@@ -376,7 +376,7 @@ i2c2: i2c@ff120000 {
assigned-clock-rates = <200000000>;
clocks = <&cru SCLK_I2C2>, <&cru PCLK_I2C2>;
clock-names = "i2c", "pclk";
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH 0>;
pinctrl-names = "default";
pinctrl-0 = <&i2c2_xfer>;
#address-cells = <1>;
......@@ -391,7 +391,7 @@ i2c3: i2c@ff130000 {
assigned-clock-rates = <200000000>;
clocks = <&cru SCLK_I2C3>, <&cru PCLK_I2C3>;
clock-names = "i2c", "pclk";
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH 0>;
pinctrl-names = "default";
pinctrl-0 = <&i2c3_xfer>;
#address-cells = <1>;
......@@ -406,7 +406,7 @@ i2c5: i2c@ff140000 {
assigned-clock-rates = <200000000>;
clocks = <&cru SCLK_I2C5>, <&cru PCLK_I2C5>;
clock-names = "i2c", "pclk";
interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH 0>;
pinctrl-names = "default";
pinctrl-0 = <&i2c5_xfer>;
#address-cells = <1>;
......@@ -421,7 +421,7 @@ i2c6: i2c@ff150000 {
assigned-clock-rates = <200000000>;
clocks = <&cru SCLK_I2C6>, <&cru PCLK_I2C6>;
clock-names = "i2c", "pclk";
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH 0>;
pinctrl-names = "default";
pinctrl-0 = <&i2c6_xfer>;
#address-cells = <1>;
......@@ -436,7 +436,7 @@ i2c7: i2c@ff160000 {
assigned-clock-rates = <200000000>;
clocks = <&cru SCLK_I2C7>, <&cru PCLK_I2C7>;
clock-names = "i2c", "pclk";
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH 0>;
pinctrl-names = "default";
pinctrl-0 = <&i2c7_xfer>;
#address-cells = <1>;
......@@ -449,7 +449,7 @@ uart0: serial@ff180000 {
reg = <0x0 0xff180000 0x0 0x100>;
clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
clock-names = "baudclk", "apb_pclk";
interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH 0>;
reg-shift = <2>;
reg-io-width = <4>;
pinctrl-names = "default";
......@@ -462,7 +462,7 @@ uart1: serial@ff190000 {
reg = <0x0 0xff190000 0x0 0x100>;
clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
clock-names = "baudclk", "apb_pclk";
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH 0>;
reg-shift = <2>;
reg-io-width = <4>;
pinctrl-names = "default";
......@@ -475,7 +475,7 @@ uart2: serial@ff1a0000 {
reg = <0x0 0xff1a0000 0x0 0x100>;
clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
clock-names = "baudclk", "apb_pclk";
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH 0>;
reg-shift = <2>;
reg-io-width = <4>;
pinctrl-names = "default";
......@@ -488,7 +488,7 @@ uart3: serial@ff1b0000 {
reg = <0x0 0xff1b0000 0x0 0x100>;
clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
clock-names = "baudclk", "apb_pclk";
interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH 0>;
reg-shift = <2>;
reg-io-width = <4>;
pinctrl-names = "default";
......@@ -501,7 +501,7 @@ spi0: spi@ff1c0000 {
reg = <0x0 0xff1c0000 0x0 0x1000>;
clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>;
clock-names = "spiclk", "apb_pclk";
interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH 0>;
pinctrl-names = "default";
pinctrl-0 = <&spi0_clk &spi0_tx &spi0_rx &spi0_cs0>;
#address-cells = <1>;
......@@ -514,7 +514,7 @@ spi1: spi@ff1d0000 {
reg = <0x0 0xff1d0000 0x0 0x1000>;
clocks = <&cru SCLK_SPI1>, <&cru PCLK_SPI1>;
clock-names = "spiclk", "apb_pclk";
interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH 0>;
pinctrl-names = "default";
pinctrl-0 = <&spi1_clk &spi1_tx &spi1_rx &spi1_cs0>;
#address-cells = <1>;
......@@ -527,7 +527,7 @@ spi2: spi@ff1e0000 {
reg = <0x0 0xff1e0000 0x0 0x1000>;
clocks = <&cru SCLK_SPI2>, <&cru PCLK_SPI2>;
clock-names = "spiclk", "apb_pclk";
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH 0>;
pinctrl-names = "default";
pinctrl-0 = <&spi2_clk &spi2_tx &spi2_rx &spi2_cs0>;
#address-cells = <1>;
......@@ -540,7 +540,7 @@ spi4: spi@ff1f0000 {
reg = <0x0 0xff1f0000 0x0 0x1000>;
clocks = <&cru SCLK_SPI4>, <&cru PCLK_SPI4>;
clock-names = "spiclk", "apb_pclk";
interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH 0>;
pinctrl-names = "default";
pinctrl-0 = <&spi4_clk &spi4_tx &spi4_rx &spi4_cs0>;
#address-cells = <1>;
......@@ -553,7 +553,7 @@ spi5: spi@ff200000 {
reg = <0x0 0xff200000 0x0 0x1000>;
clocks = <&cru SCLK_SPI5>, <&cru PCLK_SPI5>;
clock-names = "spiclk", "apb_pclk";
interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH 0>;
pinctrl-names = "default";
pinctrl-0 = <&spi5_clk &spi5_tx &spi5_rx &spi5_cs0>;
#address-cells = <1>;
......@@ -633,7 +633,7 @@ map0 {
tsadc: tsadc@ff260000 {
compatible = "rockchip,rk3399-tsadc";
reg = <0x0 0xff260000 0x0 0x100>;
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH 0>;
assigned-clocks = <&cru SCLK_TSADC>;
assigned-clock-rates = <750000>;
clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
......@@ -864,7 +864,7 @@ spi3: spi@ff350000 {
reg = <0x0 0xff350000 0x0 0x1000>;
clocks = <&pmucru SCLK_SPI3_PMU>, <&pmucru PCLK_SPI3_PMU>;
clock-names = "spiclk", "apb_pclk";
interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH 0>;
pinctrl-names = "default";
pinctrl-0 = <&spi3_clk &spi3_tx &spi3_rx &spi3_cs0>;
#address-cells = <1>;
......@@ -877,7 +877,7 @@ uart4: serial@ff370000 {
reg = <0x0 0xff370000 0x0 0x100>;
clocks = <&pmucru SCLK_UART4_PMU>, <&pmucru PCLK_UART4_PMU>;
clock-names = "baudclk", "apb_pclk";
interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH 0>;
reg-shift = <2>;
reg-io-width = <4>;
pinctrl-names = "default";
......@@ -892,7 +892,7 @@ i2c0: i2c@ff3c0000 {
assigned-clock-rates = <200000000>;
clocks = <&pmucru SCLK_I2C0_PMU>, <&pmucru PCLK_I2C0_PMU>;
clock-names = "i2c", "pclk";
interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH 0>;
pinctrl-names = "default";
pinctrl-0 = <&i2c0_xfer>;
#address-cells = <1>;
......@@ -907,7 +907,7 @@ i2c4: i2c@ff3d0000 {
assigned-clock-rates = <200000000>;
clocks = <&pmucru SCLK_I2C4_PMU>, <&pmucru PCLK_I2C4_PMU>;
clock-names = "i2c", "pclk";
interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH 0>;
pinctrl-names = "default";
pinctrl-0 = <&i2c4_xfer>;
#address-cells = <1>;
......@@ -922,7 +922,7 @@ i2c8: i2c@ff3e0000 {
assigned-clock-rates = <200000000>;
clocks = <&pmucru SCLK_I2C8_PMU>, <&pmucru PCLK_I2C8_PMU>;
clock-names = "i2c", "pclk";
interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH 0>;
pinctrl-names = "default";
pinctrl-0 = <&i2c8_xfer>;
#address-cells = <1>;
......@@ -1057,7 +1057,7 @@ u2phy0: usb2-phy@e450 {
u2phy0_host: host-port {
#phy-cells = <0>;
interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH 0>;
interrupt-names = "linestate";
status = "disabled";
};
......@@ -1074,7 +1074,7 @@ u2phy1: usb2-phy@e460 {
u2phy1_host: host-port {
#phy-cells = <0>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH 0>;
interrupt-names = "linestate";
status = "disabled";
};
......@@ -1104,13 +1104,13 @@ watchdog@ff848000 {
compatible = "snps,dw-wdt";
reg = <0x0 0xff848000 0x0 0x100>;
clocks = <&cru PCLK_WDT>;
interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH 0>;
};
rktimer: rktimer@ff850000 {
compatible = "rockchip,rk3399-timer";
reg = <0x0 0xff850000 0x0 0x1000>;
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&cru PCLK_TIMER0>, <&cru SCLK_TIMER00>;
clock-names = "pclk", "timer";
};
......@@ -1118,7 +1118,7 @@ rktimer: rktimer@ff850000 {
spdif: spdif@ff870000 {
compatible = "rockchip,rk3399-spdif";
reg = <0x0 0xff870000 0x0 0x1000>;
interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH 0>;
dmas = <&dmac_bus 7>;
dma-names = "tx";
clock-names = "mclk", "hclk";
......@@ -1132,7 +1132,7 @@ i2s0: i2s@ff880000 {
compatible = "rockchip,rk3399-i2s", "rockchip,rk3066-i2s";
reg = <0x0 0xff880000 0x0 0x1000>;
rockchip,grf = <&grf>;
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH 0>;
dmas = <&dmac_bus 0>, <&dmac_bus 1>;
dma-names = "tx", "rx";
clock-names = "i2s_clk", "i2s_hclk";
......@@ -1145,7 +1145,7 @@ i2s0: i2s@ff880000 {
i2s1: i2s@ff890000 {
compatible = "rockchip,rk3399-i2s", "rockchip,rk3066-i2s";
reg = <0x0 0xff890000 0x0 0x1000>;
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH 0>;
dmas = <&dmac_bus 2>, <&dmac_bus 3>;
dma-names = "tx", "rx";
clock-names = "i2s_clk", "i2s_hclk";
......@@ -1158,7 +1158,7 @@ i2s1: i2s@ff890000 {
i2s2: i2s@ff8a0000 {
compatible = "rockchip,rk3399-i2s", "rockchip,rk3066-i2s";
reg = <0x0 0xff8a0000 0x0 0x1000>;
interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH 0>;
dmas = <&dmac_bus 4>, <&dmac_bus 5>;
dma-names = "tx", "rx";
clock-names = "i2s_clk", "i2s_hclk";
......@@ -1178,7 +1178,7 @@ gpio0: gpio0@ff720000 {
compatible = "rockchip,gpio-bank";
reg = <0x0 0xff720000 0x0 0x100>;
clocks = <&pmucru PCLK_GPIO0_PMU>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH 0>;
gpio-controller;
#gpio-cells = <0x2>;
......@@ -1191,7 +1191,7 @@ gpio1: gpio1@ff730000 {
compatible = "rockchip,gpio-bank";
reg = <0x0 0xff730000 0x0 0x100>;
clocks = <&pmucru PCLK_GPIO1_PMU>;
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH 0>;
gpio-controller;
#gpio-cells = <0x2>;
......@@ -1204,7 +1204,7 @@ gpio2: gpio2@ff780000 {
compatible = "rockchip,gpio-bank";
reg = <0x0 0xff780000 0x0 0x100>;
clocks = <&cru PCLK_GPIO2>;
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH 0>;
gpio-controller;
#gpio-cells = <0x2>;
......@@ -1217,7 +1217,7 @@ gpio3: gpio3@ff788000 {
compatible = "rockchip,gpio-bank";
reg = <0x0 0xff788000 0x0 0x100>;
clocks = <&cru PCLK_GPIO3>;
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH 0>;
gpio-controller;
#gpio-cells = <0x2>;
......@@ -1230,7 +1230,7 @@ gpio4: gpio4@ff790000 {
compatible = "rockchip,gpio-bank";
reg = <0x0 0xff790000 0x0 0x100>;
clocks = <&cru PCLK_GPIO4>;
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH 0>;
gpio-controller;
#gpio-cells = <0x2>;
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7