Skip to content

L
linux
Commit 21c3ba34 authored by Amitkumar Karwar's avatar Amitkumar Karwar Committed by John W. Linville
Browse files
Options

mwifiex: use IEEE80211_HT_PARAM_CHA_SEC_* macros 

Replace driver specific macros with the corresponding
IEEE80211_HT_PARAM_CHA_SEC_* macros defined in ieee80211.h.
Also, rename 'adapter->chan_offset' to 'adapter->sec_chan_offset'
for consistency.
Signed-off-by: default avatarAmitkumar Karwar <akarwar@marvell.com>
Signed-off-by: default avatarBing Zhao <bzhao@marvell.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent 43906cdb
Show whitespace changes
Inline Side-by-side
Showing with 35 additions and 39 deletions
drivers/net/wireless/mwifiex/cfg80211.c
View file @ 21c3ba34
......@@ -24,26 +24,26 @@
* This function maps the nl802.11 channel type into driver channel type.
*
* The mapping is as follows -
* NL80211_CHAN_NO_HT -> NO_SEC_CHANNEL
* NL80211_CHAN_HT20 -> NO_SEC_CHANNEL
* NL80211_CHAN_HT40PLUS -> SEC_CHANNEL_ABOVE
* NL80211_CHAN_HT40MINUS -> SEC_CHANNEL_BELOW
* Others -> NO_SEC_CHANNEL
* NL80211_CHAN_NO_HT -> IEEE80211_HT_PARAM_CHA_SEC_NONE
* NL80211_CHAN_HT20 -> IEEE80211_HT_PARAM_CHA_SEC_NONE
* NL80211_CHAN_HT40PLUS -> IEEE80211_HT_PARAM_CHA_SEC_ABOVE
* NL80211_CHAN_HT40MINUS -> IEEE80211_HT_PARAM_CHA_SEC_BELOW
* Others -> IEEE80211_HT_PARAM_CHA_SEC_NONE
*/
static int
mwifiex_cfg80211_channel_type_to_mwifiex_channels(enum nl80211_channel_type
static u8
mwifiex_cfg80211_channel_type_to_sec_chan_offset(enum nl80211_channel_type
channel_type)
{
switch (channel_type) {
case NL80211_CHAN_NO_HT:
case NL80211_CHAN_HT20:
return NO_SEC_CHANNEL;
return IEEE80211_HT_PARAM_CHA_SEC_NONE;
case NL80211_CHAN_HT40PLUS:
return SEC_CHANNEL_ABOVE;
return IEEE80211_HT_PARAM_CHA_SEC_ABOVE;
case NL80211_CHAN_HT40MINUS:
return SEC_CHANNEL_BELOW;
return IEEE80211_HT_PARAM_CHA_SEC_BELOW;
default:
return NO_SEC_CHANNEL;
return IEEE80211_HT_PARAM_CHA_SEC_NONE;
}
}
......@@ -51,20 +51,20 @@ mwifiex_cfg80211_channel_type_to_mwifiex_channels(enum nl80211_channel_type
* This function maps the driver channel type into nl802.11 channel type.
*
* The mapping is as follows -
* NO_SEC_CHANNEL -> NL80211_CHAN_HT20
* SEC_CHANNEL_ABOVE -> NL80211_CHAN_HT40PLUS
* SEC_CHANNEL_BELOW -> NL80211_CHAN_HT40MINUS
* IEEE80211_HT_PARAM_CHA_SEC_NONE -> NL80211_CHAN_HT20
* IEEE80211_HT_PARAM_CHA_SEC_ABOVE -> NL80211_CHAN_HT40PLUS
* IEEE80211_HT_PARAM_CHA_SEC_BELOW -> NL80211_CHAN_HT40MINUS
* Others -> NL80211_CHAN_HT20
*/
static enum nl80211_channel_type
mwifiex_channels_to_cfg80211_channel_type(int channel_type)
{
switch (channel_type) {
case NO_SEC_CHANNEL:
case IEEE80211_HT_PARAM_CHA_SEC_NONE:
return NL80211_CHAN_HT20;
case SEC_CHANNEL_ABOVE:
case IEEE80211_HT_PARAM_CHA_SEC_ABOVE:
return NL80211_CHAN_HT40PLUS;
case SEC_CHANNEL_BELOW:
case IEEE80211_HT_PARAM_CHA_SEC_BELOW:
return NL80211_CHAN_HT40MINUS;
default:
return NL80211_CHAN_HT20;
......@@ -354,15 +354,15 @@ mwifiex_set_rf_channel(struct mwifiex_private *priv,
adapter->adhoc_11n_enabled = false;
}
}
adapter->chan_offset =
mwifiex_cfg80211_channel_type_to_mwifiex_channels
adapter->sec_chan_offset =
mwifiex_cfg80211_channel_type_to_sec_chan_offset
(channel_type);
mwifiex_send_domain_info_cmd_fw(wiphy);
}
wiphy_dbg(wiphy, "info: setting band %d, channel offset %d and "
"mode %d\n", config_bands, adapter->chan_offset,
"mode %d\n", config_bands, adapter->sec_chan_offset,
priv->bss_mode);
if (!chan)
return 0;
......@@ -729,7 +729,7 @@ static int mwifiex_cfg80211_set_bitrate_mask(struct wiphy *wiphy,
adapter->adhoc_11n_enabled = false;
}
}
adapter->chan_offset = NO_SEC_CHANNEL;
adapter->sec_chan_offset = IEEE80211_HT_PARAM_CHA_SEC_NONE;
wiphy_debug(wiphy, "info: device configured in 802.11%s%s mode\n",
(mode & BAND_B) ? "b" : "",
......@@ -850,7 +850,7 @@ mwifiex_cfg80211_assoc(struct mwifiex_private *priv, size_t ssid_len, u8 *ssid,
if (channel)
ret = mwifiex_set_rf_channel(priv, channel,
mwifiex_channels_to_cfg80211_channel_type
(priv->adapter->chan_offset));
(priv->adapter->sec_chan_offset));
ret = mwifiex_set_encode(priv, NULL, 0, 0, 1); /* Disable keys */
......
drivers/net/wireless/mwifiex/fw.h
View file @ 21c3ba34
......@@ -376,8 +376,6 @@ enum mwifiex_chan_scan_mode_bitmasks {
MWIFIEX_DISABLE_CHAN_FILT = BIT(1),
};
#define SECOND_CHANNEL_BELOW 0x30
#define SECOND_CHANNEL_ABOVE 0x10
struct mwifiex_chan_scan_param_set {
u8 radio_type;
u8 chan_number;
......
drivers/net/wireless/mwifiex/init.c
View file @ 21c3ba34
......@@ -246,7 +246,7 @@ static void mwifiex_init_adapter(struct mwifiex_adapter *adapter)
memset(adapter->event_body, 0, sizeof(adapter->event_body));
adapter->hw_dot_11n_dev_cap = 0;
adapter->hw_dev_mcs_support = 0;
adapter->chan_offset = 0;
adapter->sec_chan_offset = 0;
adapter->adhoc_11n_enabled = false;
mwifiex_wmm_init(adapter);
......
drivers/net/wireless/mwifiex/ioctl.h
View file @ 21c3ba34
......@@ -62,10 +62,6 @@ enum {
BAND_AN = 16,
};
#define NO_SEC_CHANNEL 0
#define SEC_CHANNEL_ABOVE 1
#define SEC_CHANNEL_BELOW 3
enum {
ADHOC_IDLE,
ADHOC_STARTED,
......
drivers/net/wireless/mwifiex/join.c
View file @ 21c3ba34
......@@ -885,12 +885,14 @@ mwifiex_cmd_802_11_ad_hoc_start(struct mwifiex_private *priv,
= mwifiex_band_to_radio_type(priv->curr_bss_params.band);
if (adapter->adhoc_start_band & BAND_GN
|| adapter->adhoc_start_band & BAND_AN) {
if (adapter->chan_offset == SEC_CHANNEL_ABOVE)
if (adapter->sec_chan_offset ==
IEEE80211_HT_PARAM_CHA_SEC_ABOVE)
chan_tlv->chan_scan_param[0].radio_type |=
SECOND_CHANNEL_ABOVE;
else if (adapter->chan_offset == SEC_CHANNEL_BELOW)
(IEEE80211_HT_PARAM_CHA_SEC_ABOVE << 4);
else if (adapter->sec_chan_offset ==
IEEE80211_HT_PARAM_CHA_SEC_ABOVE)
chan_tlv->chan_scan_param[0].radio_type |=
SECOND_CHANNEL_BELOW;
(IEEE80211_HT_PARAM_CHA_SEC_BELOW << 4);
}
dev_dbg(adapter->dev, "info: ADHOC_S_CMD: TLV Band = %d\n",
chan_tlv->chan_scan_param[0].radio_type);
......@@ -936,8 +938,8 @@ mwifiex_cmd_802_11_ad_hoc_start(struct mwifiex_private *priv,
ht_info->ht_info.control_chan =
(u8) priv->curr_bss_params.bss_descriptor.channel;
if (adapter->chan_offset) {
ht_info->ht_info.ht_param = adapter->chan_offset;
if (adapter->sec_chan_offset) {
ht_info->ht_info.ht_param = adapter->sec_chan_offset;
ht_info->ht_info.ht_param |=
IEEE80211_HT_PARAM_CHAN_WIDTH_ANY;
}
......
drivers/net/wireless/mwifiex/main.h
View file @ 21c3ba34
......@@ -640,7 +640,7 @@ struct mwifiex_adapter {
u32 hw_dot_11n_dev_cap;
u8 hw_dev_mcs_support;
u8 adhoc_11n_enabled;
u8 chan_offset;
u8 sec_chan_offset;
struct mwifiex_dbg dbg;
u8 arp_filter[ARP_FILTER_MAX_BUF_SIZE];
u32 arp_filter_size;
......
drivers/net/wireless/mwifiex/sta_cmd.c
View file @ 21c3ba34
......@@ -748,7 +748,7 @@ static int mwifiex_cmd_802_11_rf_channel(struct mwifiex_private *priv,
cpu_to_le16(HostCmd_SCAN_RADIO_TYPE_A);
rf_type = le16_to_cpu(rf_chan->rf_type);
SET_SECONDARYCHAN(rf_type, priv->adapter->chan_offset);
SET_SECONDARYCHAN(rf_type, priv->adapter->sec_chan_offset);
rf_chan->current_channel = cpu_to_le16(*channel);
}
rf_chan->action = cpu_to_le16(cmd_action);
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7