Merge tag 'mct-exynos-for-v3.10' of...

Merge tag 'mct-exynos-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/drivers

From Kukjin Kim <kgene.kim@samsung.com>:

add support exynos mct device tree and move into drivers/clocksource

* tag 'mct-exynos-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  clocksource: mct: Add terminating entry for exynos_mct_ids table
  clocksource: mct: Add missing semicolons in exynos_mct.c
  ARM: EXYNOS: move mct driver to drivers/clocksource
  ARM: EXYNOS: remove static io-remapping of mct registers for Exynos5
  ARM: dts: add mct device tree node for all supported Exynos SoC's
  ARM: EXYNOS: allow dt based discovery of mct controller using clocksource_of_init
  ARM: EXYNOS: add device tree support for MCT controller driver
  ARM: EXYNOS: prepare an array of MCT interrupt numbers and use it
  ARM: EXYNOS: add a register base address variable in mct controller driver

Conflicts:
	drivers/clocksource/Makefile
	drivers/clocksource/exynos_mct.c

[arnd: adapt to CLOCKSOURCE_OF_DECLARE interface change]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt

+Samsung's Multi Core Timer (MCT)
+
+The Samsung's Multi Core Timer (MCT) module includes two main blocks, the
+global timer and CPU local timers. The global timer is a 64-bit free running
+up-counter and can generate 4 interrupts when the counter reaches one of the
+four preset counter values. The CPU local timers are 32-bit free running
+down-counters and generate an interrupt when the counter expires. There is
+one CPU local timer instantiated in MCT for every CPU in the system.
+
+Required properties:
+
+- compatible: should be "samsung,exynos4210-mct".
+  (a) "samsung,exynos4210-mct", for mct compatible with Exynos4210 mct.
+  (b) "samsung,exynos4412-mct", for mct compatible with Exynos4412 mct.
+
+- reg: base address of the mct controller and length of the address space
+  it occupies.
+
+- interrupts: the list of interrupts generated by the controller. The following
+  should be the order of the interrupts specified. The local timer interrupts
+  should be specified after the four global timer interrupts have been
+  specified.
+
+	0: Global Timer Interrupt 0
+	1: Global Timer Interrupt 1
+	2: Global Timer Interrupt 2
+	3: Global Timer Interrupt 3
+	4: Local Timer Interrupt 0
+	5: Local Timer Interrupt 1
+	6: ..
+	7: ..
+	i: Local Timer Interrupt n
+
+Example 1: In this example, the system uses only the first global timer
+	   interrupt generated by MCT and the remaining three global timer
+	   interrupts are unused. Two local timer interrupts have been
+	   specified.
+
+	mct@10050000 {
+		compatible = "samsung,exynos4210-mct";
+		reg = <0x10050000 0x800>;
+		interrupts = <0 57 0>, <0 0 0>, <0 0 0>, <0 0 0>,
+			     <0 42 0>, <0 48 0>;
+	};
+
+Example 2: In this example, the MCT global and local timer interrupts are
+	   connected to two seperate interrupt controllers. Hence, an
+	   interrupt-map is created to map the interrupts to the respective
+	   interrupt controllers.
+
+	mct@101C0000 {
+		compatible = "samsung,exynos4210-mct";
+		reg = <0x101C0000 0x800>;
+		interrupt-controller;
+		#interrups-cells = <2>;
+		interrupt-parent = <&mct_map>;
+		interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
+			     <4 0>, <5 0>;
+
+		mct_map: mct-map {
+			#interrupt-cells = <2>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = <0x0 0 &combiner 23 3>,
+					<0x4 0 &gic 0 120 0>,
+					<0x5 0 &gic 0 121 0>;
+		};
+	};

arch/arm/Kconfig

@@ -1654,7 +1654,7 @@ config LOCAL_TIMERS
 	bool "Use local timer interrupts"
 	depends on SMP
 	default y
-	select HAVE_ARM_TWD if (!ARCH_MSM_SCORPIONMP && !EXYNOS4_MCT)
+	select HAVE_ARM_TWD if (!ARCH_MSM_SCORPIONMP && !CLKSRC_EXYNOS_MCT)
 	help
 	  Enable support for local timers on SMP platforms, rather then the
 	  legacy IPI broadcast method.  Local timers allows the system

arch/arm/boot/dts/exynos4210.dtsi

@@ -47,6 +47,28 @@ combiner:interrupt-controller@10440000 {
 			     <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>;
 	};
 
+	mct@10050000 {
+		compatible = "samsung,exynos4210-mct";
+		reg = <0x10050000 0x800>;
+		interrupt-controller;
+		#interrups-cells = <2>;
+		interrupt-parent = <&mct_map>;
+		interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
+			     <4 0>, <5 0>;
+
+		mct_map: mct-map {
+			#interrupt-cells = <2>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = <0x0 0 &gic 0 57 0>,
+					<0x1 0 &gic 0 69 0>,
+					<0x2 0 &combiner 12 6>,
+					<0x3 0 &combiner 12 7>,
+					<0x4 0 &gic 0 42 0>,
+					<0x5 0 &gic 0 48 0>;
+		};
+	};
+
 	pinctrl_0: pinctrl@11400000 {
 		compatible = "samsung,exynos4210-pinctrl";
 		reg = <0x11400000 0x1000>;

arch/arm/boot/dts/exynos4212.dtsi

@@ -25,4 +25,26 @@ / {
 	gic:interrupt-controller@10490000 {
 		cpu-offset = <0x8000>;
 	};
+
+	mct@10050000 {
+		compatible = "samsung,exynos4412-mct";
+		reg = <0x10050000 0x800>;
+		interrupt-controller;
+		#interrups-cells = <2>;
+		interrupt-parent = <&mct_map>;
+		interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
+			     <4 0>, <5 0>;
+
+		mct_map: mct-map {
+			#interrupt-cells = <2>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = <0x0 0 &gic 0 57 0>,
+					<0x1 0 &combiner 12 5>,
+					<0x2 0 &combiner 12 6>,
+					<0x3 0 &combiner 12 7>,
+					<0x4 0 &gic 1 12 0>,
+					<0x5 0 &gic 1 12 0>;
+		};
+	};
 };

arch/arm/boot/dts/exynos4412.dtsi

@@ -25,4 +25,28 @@ / {
 	gic:interrupt-controller@10490000 {
 		cpu-offset = <0x4000>;
 	};
+
+	mct@10050000 {
+		compatible = "samsung,exynos4412-mct";
+		reg = <0x10050000 0x800>;
+		interrupt-controller;
+		#interrups-cells = <2>;
+		interrupt-parent = <&mct_map>;
+		interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
+			     <4 0>, <5 0>, <6 0>, <7 0>;
+
+		mct_map: mct-map {
+			#interrupt-cells = <2>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = <0x0 0 &gic 0 57 0>,
+					<0x1 0 &combiner 12 5>,
+					<0x2 0 &combiner 12 6>,
+					<0x3 0 &combiner 12 7>,
+					<0x4 0 &gic 1 12 0>,
+					<0x5 0 &gic 1 12 0>,
+					<0x6 0 &gic 1 12 0>,
+					<0x7 0 &gic 1 12 0>;
+		};
+	};
 };

arch/arm/boot/dts/exynos5250.dtsi

@@ -69,6 +69,28 @@ combiner:interrupt-controller@10440000 {
 			     <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>;
 	};
 
+	mct@101C0000 {
+		compatible = "samsung,exynos4210-mct";
+		reg = <0x101C0000 0x800>;
+		interrupt-controller;
+		#interrups-cells = <2>;
+		interrupt-parent = <&mct_map>;
+		interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
+			     <4 0>, <5 0>;
+
+		mct_map: mct-map {
+			#interrupt-cells = <2>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = <0x0 0 &combiner 23 3>,
+					<0x1 0 &combiner 23 4>,
+					<0x2 0 &combiner 25 2>,
+					<0x3 0 &combiner 25 3>,
+					<0x4 0 &gic 0 120 0>,
+					<0x5 0 &gic 0 121 0>;
+		};
+	};
+
 	watchdog {
 		compatible = "samsung,s3c2410-wdt";
 		reg = <0x101D0000 0x100>;

arch/arm/mach-exynos/Kconfig

@@ -79,12 +79,6 @@ config SOC_EXYNOS5440
 	help
 	  Enable EXYNOS5440 SoC support
 
-config EXYNOS4_MCT
-	bool
-	default y
-	help
-	  Use MCT (Multi Core Timer) as kernel timers
-
 config EXYNOS_DEV_DMA
 	bool
 	help
@@ -406,6 +400,7 @@ config MACH_EXYNOS4_DT
 	bool "Samsung Exynos4 Machine using device tree"
 	depends on ARCH_EXYNOS4
 	select ARM_AMBA
+	select CLKSRC_OF
 	select CPU_EXYNOS4210
 	select HAVE_SAMSUNG_KEYPAD if INPUT_KEYBOARD
 	select PINCTRL
@@ -422,6 +417,7 @@ config MACH_EXYNOS5_DT
 	default y
 	depends on ARCH_EXYNOS5
 	select ARM_AMBA
+	select CLKSRC_OF
 	select USE_OF
 	help
 	  Machine support for Samsung EXYNOS5 machine with device tree enabled.

arch/arm/mach-exynos/Makefile

@@ -26,8 +26,6 @@ obj-$(CONFIG_ARCH_EXYNOS)	+= pmu.o
 
 obj-$(CONFIG_SMP)		+= platsmp.o headsmp.o
 
-obj-$(CONFIG_EXYNOS4_MCT)	+= mct.o
-
 obj-$(CONFIG_HOTPLUG_CPU)	+= hotplug.o
 
 # machine support

arch/arm/mach-exynos/common.c

@@ -256,11 +256,6 @@ static struct map_desc exynos5_iodesc[] __initdata = {
 		.pfn		= __phys_to_pfn(EXYNOS5_PA_SROMC),
 		.length		= SZ_4K,
 		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5P_VA_SYSTIMER,
-		.pfn		= __phys_to_pfn(EXYNOS5_PA_SYSTIMER),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
 	}, {
 		.virtual	= (unsigned long)S5P_VA_SYSRAM,
 		.pfn		= __phys_to_pfn(EXYNOS5_PA_SYSRAM),

arch/arm/mach-exynos/common.h

@@ -12,7 +12,7 @@
 #ifndef __ARCH_ARM_MACH_EXYNOS_COMMON_H
 #define __ARCH_ARM_MACH_EXYNOS_COMMON_H
 
-extern void exynos4_timer_init(void);
+extern void mct_init(void);
 
 struct map_desc;
 void exynos_init_io(struct map_desc *mach_desc, int size);

arch/arm/mach-exynos/include/mach/irqs.h

@@ -30,8 +30,6 @@
 
 /* For EXYNOS4 and EXYNOS5 */
 
-#define EXYNOS_IRQ_MCT_LOCALTIMER	IRQ_PPI(12)
-
 #define EXYNOS_IRQ_EINT16_31		IRQ_SPI(32)
 
 /* For EXYNOS4 SoCs */
@@ -323,8 +321,6 @@
 #define EXYNOS5_IRQ_CEC			IRQ_SPI(114)
 #define EXYNOS5_IRQ_SATA		IRQ_SPI(115)
 
-#define EXYNOS5_IRQ_MCT_L0		IRQ_SPI(120)
-#define EXYNOS5_IRQ_MCT_L1		IRQ_SPI(121)
 #define EXYNOS5_IRQ_MMC44		IRQ_SPI(123)
 #define EXYNOS5_IRQ_MDMA1		IRQ_SPI(124)
 #define EXYNOS5_IRQ_FIMC_LITE0		IRQ_SPI(125)
@@ -419,8 +415,6 @@
 #define EXYNOS5_IRQ_PMU_CPU1		COMBINER_IRQ(22, 4)
 
 #define EXYNOS5_IRQ_EINT0		COMBINER_IRQ(23, 0)
-#define EXYNOS5_IRQ_MCT_G0		COMBINER_IRQ(23, 3)
-#define EXYNOS5_IRQ_MCT_G1		COMBINER_IRQ(23, 4)
 
 #define EXYNOS5_IRQ_EINT1		COMBINER_IRQ(24, 0)
 #define EXYNOS5_IRQ_SYSMMU_LITE1_0	COMBINER_IRQ(24, 1)

arch/arm/mach-exynos/include/mach/map.h

@@ -65,7 +65,6 @@
 #define EXYNOS5_PA_CMU			0x10010000
 
 #define EXYNOS4_PA_SYSTIMER		0x10050000
-#define EXYNOS5_PA_SYSTIMER		0x101C0000
 
 #define EXYNOS4_PA_WATCHDOG		0x10060000
 #define EXYNOS5_PA_WATCHDOG		0x101D0000

arch/arm/mach-exynos/include/mach/regs-mct.h

-/* arch/arm/mach-exynos4/include/mach/regs-mct.h
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * EXYNOS4 MCT configutation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_REGS_MCT_H
-#define __ASM_ARCH_REGS_MCT_H __FILE__
-
-#include <mach/map.h>
-
-#define EXYNOS4_MCTREG(x)		(S5P_VA_SYSTIMER + (x))
-
-#define EXYNOS4_MCT_G_CNT_L		EXYNOS4_MCTREG(0x100)
-#define EXYNOS4_MCT_G_CNT_U		EXYNOS4_MCTREG(0x104)
-#define EXYNOS4_MCT_G_CNT_WSTAT		EXYNOS4_MCTREG(0x110)
-
-#define EXYNOS4_MCT_G_COMP0_L		EXYNOS4_MCTREG(0x200)
-#define EXYNOS4_MCT_G_COMP0_U		EXYNOS4_MCTREG(0x204)
-#define EXYNOS4_MCT_G_COMP0_ADD_INCR	EXYNOS4_MCTREG(0x208)
-
-#define EXYNOS4_MCT_G_TCON		EXYNOS4_MCTREG(0x240)
-
-#define EXYNOS4_MCT_G_INT_CSTAT		EXYNOS4_MCTREG(0x244)
-#define EXYNOS4_MCT_G_INT_ENB		EXYNOS4_MCTREG(0x248)
-#define EXYNOS4_MCT_G_WSTAT		EXYNOS4_MCTREG(0x24C)
-
-#define _EXYNOS4_MCT_L_BASE		EXYNOS4_MCTREG(0x300)
-#define EXYNOS4_MCT_L_BASE(x)		(_EXYNOS4_MCT_L_BASE + (0x100 * x))
-#define EXYNOS4_MCT_L_MASK		(0xffffff00)
-
-#define MCT_L_TCNTB_OFFSET		(0x00)
-#define MCT_L_ICNTB_OFFSET		(0x08)
-#define MCT_L_TCON_OFFSET		(0x20)
-#define MCT_L_INT_CSTAT_OFFSET		(0x30)
-#define MCT_L_INT_ENB_OFFSET		(0x34)
-#define MCT_L_WSTAT_OFFSET		(0x40)
-
-#define MCT_G_TCON_START		(1 << 8)
-#define MCT_G_TCON_COMP0_AUTO_INC	(1 << 1)
-#define MCT_G_TCON_COMP0_ENABLE		(1 << 0)
-
-#define MCT_L_TCON_INTERVAL_MODE	(1 << 2)
-#define MCT_L_TCON_INT_START		(1 << 1)
-#define MCT_L_TCON_TIMER_START		(1 << 0)
-
-#endif /* __ASM_ARCH_REGS_MCT_H */

arch/arm/mach-exynos/mach-armlex4210.c

@@ -202,6 +202,6 @@ MACHINE_START(ARMLEX4210, "ARMLEX4210")
 	.map_io		= armlex4210_map_io,
 	.init_machine	= armlex4210_machine_init,
 	.init_late	= exynos_init_late,
-	.init_time	= exynos4_timer_init,
+	.init_time	= mct_init,
 	.restart	= exynos4_restart,
 MACHINE_END

arch/arm/mach-exynos/mach-exynos4-dt.c

@@ -13,6 +13,7 @@
 
 #include <linux/of_platform.h>
 #include <linux/serial_core.h>
+#include <linux/clocksource.h>
 
 #include <asm/mach/arch.h>
 #include <mach/map.h>
@@ -142,7 +143,7 @@ DT_MACHINE_START(EXYNOS4210_DT, "Samsung Exynos4 (Flattened Device Tree)")
 	.map_io		= exynos4_dt_map_io,
 	.init_machine	= exynos4_dt_machine_init,
 	.init_late	= exynos_init_late,
-	.init_time	= exynos4_timer_init,
+	.init_time	= clocksource_of_init,
 	.dt_compat	= exynos4_dt_compat,
 	.restart        = exynos4_restart,
 MACHINE_END

arch/arm/mach-exynos/mach-exynos5-dt.c

@@ -14,6 +14,7 @@
 #include <linux/serial_core.h>
 #include <linux/memblock.h>
 #include <linux/io.h>
+#include <linux/clocksource.h>
 
 #include <asm/mach/arch.h>
 #include <mach/map.h>
@@ -216,7 +217,7 @@ DT_MACHINE_START(EXYNOS5_DT, "SAMSUNG EXYNOS5 (Flattened Device Tree)")
 	.map_io		= exynos5_dt_map_io,
 	.init_machine	= exynos5_dt_machine_init,
 	.init_late	= exynos_init_late,
-	.init_time	= exynos4_timer_init,
+	.init_time	= clocksource_of_init,
 	.dt_compat	= exynos5_dt_compat,
 	.restart        = exynos5_restart,
 	.reserve	= exynos5_reserve,

arch/arm/mach-exynos/mach-nuri.c

@@ -1380,7 +1380,7 @@ MACHINE_START(NURI, "NURI")
 	.map_io		= nuri_map_io,
 	.init_machine	= nuri_machine_init,
 	.init_late	= exynos_init_late,
-	.init_time	= exynos4_timer_init,
+	.init_time	= mct_init,
 	.reserve        = &nuri_reserve,
 	.restart	= exynos4_restart,
 MACHINE_END

arch/arm/mach-exynos/mach-origen.c

@@ -815,7 +815,7 @@ MACHINE_START(ORIGEN, "ORIGEN")
 	.map_io		= origen_map_io,
 	.init_machine	= origen_machine_init,
 	.init_late	= exynos_init_late,
-	.init_time	= exynos4_timer_init,
+	.init_time	= mct_init,
 	.reserve	= &origen_reserve,
 	.restart	= exynos4_restart,
 MACHINE_END

arch/arm/mach-exynos/mach-smdk4x12.c

@@ -376,7 +376,7 @@ MACHINE_START(SMDK4212, "SMDK4212")
 	.init_irq	= exynos4_init_irq,
 	.map_io		= smdk4x12_map_io,
 	.init_machine	= smdk4x12_machine_init,
-	.init_time	= exynos4_timer_init,
+	.init_time	= mct_init,
 	.restart	= exynos4_restart,
 	.reserve	= &smdk4x12_reserve,
 MACHINE_END
@@ -390,7 +390,7 @@ MACHINE_START(SMDK4412, "SMDK4412")
 	.map_io		= smdk4x12_map_io,
 	.init_machine	= smdk4x12_machine_init,
 	.init_late	= exynos_init_late,
-	.init_time	= exynos4_timer_init,
+	.init_time	= mct_init,
 	.restart	= exynos4_restart,
 	.reserve	= &smdk4x12_reserve,
 MACHINE_END

arch/arm/mach-exynos/mach-smdkv310.c

@@ -423,7 +423,7 @@ MACHINE_START(SMDKV310, "SMDKV310")
 	.init_irq	= exynos4_init_irq,
 	.map_io		= smdkv310_map_io,
 	.init_machine	= smdkv310_machine_init,
-	.init_time	= exynos4_timer_init,
+	.init_time	= mct_init,
 	.reserve	= &smdkv310_reserve,
 	.restart	= exynos4_restart,
 MACHINE_END
@@ -436,7 +436,7 @@ MACHINE_START(SMDKC210, "SMDKC210")
 	.map_io		= smdkv310_map_io,
 	.init_machine	= smdkv310_machine_init,
 	.init_late	= exynos_init_late,
-	.init_time	= exynos4_timer_init,
+	.init_time	= mct_init,
 	.reserve	= &smdkv310_reserve,
 	.restart	= exynos4_restart,
 MACHINE_END

drivers/clocksource/Kconfig

@@ -70,3 +70,8 @@ config CLKSRC_METAG_GENERIC
 	def_bool y if METAG
 	help
 	  This option enables support for the Meta per-thread timers.
+
+config CLKSRC_EXYNOS_MCT
+	def_bool y if ARCH_EXYNOS
+	help
+	  Support for Multi Core Timer controller on Exynos SoCs.

drivers/clocksource/Makefile

@@ -20,6 +20,7 @@ obj-$(CONFIG_SUNXI_TIMER)	+= sunxi_timer.o
 obj-$(CONFIG_ARCH_TEGRA)	+= tegra20_timer.o
 obj-$(CONFIG_VT8500_TIMER)	+= vt8500_timer.o
 obj-$(CONFIG_CADENCE_TTC_TIMER)	+= cadence_ttc_timer.o
+obj-$(CONFIG_CLKSRC_EXYNOS_MCT)	+= exynos_mct.o
 
 obj-$(CONFIG_ARM_ARCH_TIMER)		+= arm_arch_timer.o
 obj-$(CONFIG_CLKSRC_METAG_GENERIC)	+= metag_generic.o