Commit 2400620c authored by Xiang Chen's avatar Xiang Chen Committed by Martin K. Petersen

scsi: hisi_sas: add phy_set_linkrate_v3_hw()

Add function to set linkrate for v3 hw.
Signed-off-by: default avatarXiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: default avatarJohn Garry <john.garry@huawei.com>
Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
parent 056e4cc6
...@@ -1680,6 +1680,44 @@ static int hisi_sas_v3_init(struct hisi_hba *hisi_hba) ...@@ -1680,6 +1680,44 @@ static int hisi_sas_v3_init(struct hisi_hba *hisi_hba)
return 0; return 0;
} }
static void phy_set_linkrate_v3_hw(struct hisi_hba *hisi_hba, int phy_no,
struct sas_phy_linkrates *r)
{
u32 prog_phy_link_rate =
hisi_sas_phy_read32(hisi_hba, phy_no, PROG_PHY_LINK_RATE);
struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no];
struct asd_sas_phy *sas_phy = &phy->sas_phy;
int i;
enum sas_linkrate min, max;
u32 rate_mask = 0;
if (r->maximum_linkrate == SAS_LINK_RATE_UNKNOWN) {
max = sas_phy->phy->maximum_linkrate;
min = r->minimum_linkrate;
} else if (r->minimum_linkrate == SAS_LINK_RATE_UNKNOWN) {
max = r->maximum_linkrate;
min = sas_phy->phy->minimum_linkrate;
} else
return;
sas_phy->phy->maximum_linkrate = max;
sas_phy->phy->minimum_linkrate = min;
min -= SAS_LINK_RATE_1_5_GBPS;
max -= SAS_LINK_RATE_1_5_GBPS;
for (i = 0; i <= max; i++)
rate_mask |= 1 << (i * 2);
prog_phy_link_rate &= ~0xff;
prog_phy_link_rate |= rate_mask;
hisi_sas_phy_write32(hisi_hba, phy_no, PROG_PHY_LINK_RATE,
prog_phy_link_rate);
phy_hard_reset_v3_hw(hisi_hba, phy_no);
}
static void interrupt_disable_v3_hw(struct hisi_hba *hisi_hba) static void interrupt_disable_v3_hw(struct hisi_hba *hisi_hba)
{ {
struct pci_dev *pdev = hisi_hba->pci_dev; struct pci_dev *pdev = hisi_hba->pci_dev;
...@@ -1760,6 +1798,7 @@ static const struct hisi_sas_hw hisi_sas_v3_hw = { ...@@ -1760,6 +1798,7 @@ static const struct hisi_sas_hw hisi_sas_v3_hw = {
.phy_disable = disable_phy_v3_hw, .phy_disable = disable_phy_v3_hw,
.phy_hard_reset = phy_hard_reset_v3_hw, .phy_hard_reset = phy_hard_reset_v3_hw,
.phy_get_max_linkrate = phy_get_max_linkrate_v3_hw, .phy_get_max_linkrate = phy_get_max_linkrate_v3_hw,
.phy_set_linkrate = phy_set_linkrate_v3_hw,
.dereg_device = dereg_device_v3_hw, .dereg_device = dereg_device_v3_hw,
.soft_reset = soft_reset_v3_hw, .soft_reset = soft_reset_v3_hw,
.get_phys_state = get_phys_state_v3_hw, .get_phys_state = get_phys_state_v3_hw,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment