rtl818x: add registers for rtl8187se

Adds registers for rtl8187se to the rtl818x common struct
Signed-off-by: Andrea Merello <andrea.merello@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

drivers/net/wireless/rtl818x/rtl818x.h

@@ -16,30 +16,88 @@
 #define RTL818X_H
 
 struct rtl818x_csr {
+
+	union {
 		u8	MAC[6];
+		u8	offset1[6];     /* upper page indexing helpers */
+		__le16	offset2[1];
+		__le32	offset4[1];
+	} __packed;
+
 	u8	reserved_0[2];
-	__le32	MAR[2];
+
+	union {
+		__le32	MAR[2];  /* 0x8 */
+
+		struct{ /* rtl8187se */
+			u8 rf_sw_config; /* 0x8 */
+			u8 reserved_01[3];
+			__le32 TMGDA; /* 0xc */
+		} __packed;
+	} __packed;
+
+	union { /*  0x10  */
+		struct {
 			u8	RX_FIFO_COUNT;
 			u8	reserved_1;
 			u8	TX_FIFO_COUNT;
 			u8	BQREQ;
-	u8	reserved_2[4];
+		} __packed;
+
+		__le32 TBKDA; /* for 8187se */
+	} __packed;
+
+	__le32 TBEDA; /* 0x14 - for rtl8187se */
+
 	__le32	TSFT[2];
+
+	union { /* 0x20 */
 		__le32	TLPDA;
+		__le32  TVIDA; /* for 8187se */
+	} __packed;
+
+	union { /* 0x24 */
 		__le32	TNPDA;
-	__le32	THPDA;
+		__le32  TVODA; /* for 8187se */
+	} __packed;
+
+	/* hi pri ring for all cards */
+	__le32	THPDA; /* 0x28 */
+
+	union { /* 0x2c */
+		struct {
+			u8 reserved_2a;
+			u8 EIFS_8187SE;
+		} __packed;
+
 		__le16	BRSR;
-	u8	BSSID[6];
+	} __packed;
+
+	u8	BSSID[6]; /* 0x2e */
+
+	union { /* 0x34 */
+		struct {
 			u8 RESP_RATE;
 			u8 EIFS;
-	u8	reserved_3[1];
-	u8	CMD;
+		} __packed;
+		__le16 BRSR_8187SE;
+	} __packed;
+
+	u8	reserved_3[1]; /* 0x36 */
+	u8	CMD; /* 0x37 */
 #define RTL818X_CMD_TX_ENABLE		(1 << 2)
 #define RTL818X_CMD_RX_ENABLE		(1 << 3)
 #define RTL818X_CMD_RESET		(1 << 4)
-	u8	reserved_4[4];
+	u8	reserved_4[4]; /* 0x38 */
+	union {
+		struct {
 			__le16	INT_MASK;
 			__le16	INT_STATUS;
+		} __packed;
+
+		__le32	INT_STATUS_SE; /* 0x3c */
+	} __packed;
+/* status bits for rtl8187 and rtl8180/8185 */
 #define RTL818X_INT_RX_OK		(1 <<  0)
 #define RTL818X_INT_RX_ERR		(1 <<  1)
 #define RTL818X_INT_TXL_OK		(1 <<  2)
@@ -56,7 +114,34 @@ struct rtl818x_csr {
 #define RTL818X_INT_BEACON		(1 << 13)
 #define RTL818X_INT_TIME_OUT		(1 << 14)
 #define RTL818X_INT_TX_FO		(1 << 15)
-	__le32	TX_CONF;
+/* status bits for rtl8187se */
+#define RTL818X_INT_SE_TIMER3		(1 <<  0)
+#define RTL818X_INT_SE_TIMER2		(1 <<  1)
+#define RTL818X_INT_SE_RQ0SOR		(1 <<  2)
+#define RTL818X_INT_SE_TXBED_OK		(1 <<  3)
+#define RTL818X_INT_SE_TXBED_ERR	(1 <<  4)
+#define RTL818X_INT_SE_TXBE_OK		(1 <<  5)
+#define RTL818X_INT_SE_TXBE_ERR		(1 <<  6)
+#define RTL818X_INT_SE_RX_OK		(1 <<  7)
+#define RTL818X_INT_SE_RX_ERR		(1 <<  8)
+#define RTL818X_INT_SE_TXL_OK		(1 <<  9)
+#define RTL818X_INT_SE_TXL_ERR		(1 << 10)
+#define RTL818X_INT_SE_RX_DU		(1 << 11)
+#define RTL818X_INT_SE_RX_FIFO		(1 << 12)
+#define RTL818X_INT_SE_TXN_OK		(1 << 13)
+#define RTL818X_INT_SE_TXN_ERR		(1 << 14)
+#define RTL818X_INT_SE_TXH_OK		(1 << 15)
+#define RTL818X_INT_SE_TXH_ERR		(1 << 16)
+#define RTL818X_INT_SE_TXB_OK		(1 << 17)
+#define RTL818X_INT_SE_TXB_ERR		(1 << 18)
+#define RTL818X_INT_SE_ATIM_TO		(1 << 19)
+#define RTL818X_INT_SE_BK_TO		(1 << 20)
+#define RTL818X_INT_SE_TIMER1		(1 << 21)
+#define RTL818X_INT_SE_TX_FIFO		(1 << 22)
+#define RTL818X_INT_SE_WAKEUP		(1 << 23)
+#define RTL818X_INT_SE_BK_DMA		(1 << 24)
+#define RTL818X_INT_SE_TMGD_OK		(1 << 30)
+	__le32	TX_CONF; /* 0x40 */
 #define RTL818X_TX_CONF_LOOPBACK_MAC	(1 << 17)
 #define RTL818X_TX_CONF_LOOPBACK_CONT	(3 << 17)
 #define RTL818X_TX_CONF_NO_ICV		(1 << 19)
@@ -68,6 +153,7 @@ struct rtl818x_csr {
 #define RTL818X_TX_CONF_R8185_D		(5 << 25)
 #define RTL818X_TX_CONF_R8187vD		(5 << 25)
 #define RTL818X_TX_CONF_R8187vD_B	(6 << 25)
+#define RTL818X_TX_CONF_RTL8187SE	(6 << 25)
 #define RTL818X_TX_CONF_HWVER_MASK	(7 << 25)
 #define RTL818X_TX_CONF_DISREQQSIZE	(1 << 28)
 #define RTL818X_TX_CONF_PROBE_DTS	(1 << 29)
@@ -122,28 +208,64 @@ struct rtl818x_csr {
 	u8	PGSELECT;
 	u8	SECURITY;
 	__le32	ANAPARAM2;
-	u8	reserved_10[12];
-	__le16	BEACON_INTERVAL;
-	__le16	ATIM_WND;
-	__le16	BEACON_INTERVAL_TIME;
-	__le16	ATIMTR_INTERVAL;
-	u8	PHY_DELAY;
-	u8	CARRIER_SENSE_COUNTER;
-	u8	reserved_11[2];
-	u8	PHY[4];
-	__le16	RFPinsOutput;
-	__le16	RFPinsEnable;
-	__le16	RFPinsSelect;
-	__le16	RFPinsInput;
-	__le32	RF_PARA;
-	__le32	RF_TIMING;
-	u8	GP_ENABLE;
-	u8	GPIO0;
-	u8	GPIO1;
-	u8	reserved_12;
-	__le32	HSSI_PARA;
-	u8	reserved_13[4];
-	u8	TX_AGC_CTL;
+	u8	reserved_10[8];
+	__le32  IMR;		/* 0x6c	- Interrupt mask reg for 8187se */
+#define IMR_TMGDOK      ((1 << 30))
+#define IMR_DOT11HINT	((1 << 25))	/* 802.11h Measurement Interrupt */
+#define IMR_BCNDMAINT	((1 << 24))	/* Beacon DMA Interrupt */
+#define IMR_WAKEINT	((1 << 23))	/* Wake Up Interrupt */
+#define IMR_TXFOVW	((1 << 22))	/* Tx FIFO Overflow */
+#define IMR_TIMEOUT1	((1 << 21))	/* Time Out Interrupt 1 */
+#define IMR_BCNINT	((1 << 20))	/* Beacon Time out */
+#define IMR_ATIMINT	((1 << 19))	/* ATIM Time Out */
+#define IMR_TBDER	((1 << 18))	/* Tx Beacon Descriptor Error */
+#define IMR_TBDOK	((1 << 17))	/* Tx Beacon Descriptor OK */
+#define IMR_THPDER	((1 << 16))	/* Tx High Priority Descriptor Error */
+#define IMR_THPDOK	((1 << 15))	/* Tx High Priority Descriptor OK */
+#define IMR_TVODER	((1 << 14))	/* Tx AC_VO Descriptor Error Int */
+#define IMR_TVODOK	((1 << 13))	/* Tx AC_VO Descriptor OK Interrupt */
+#define IMR_FOVW	((1 << 12))	/* Rx FIFO Overflow Interrupt */
+#define IMR_RDU		((1 << 11))	/* Rx Descriptor Unavailable */
+#define IMR_TVIDER	((1 << 10))	/* Tx AC_VI Descriptor Error */
+#define IMR_TVIDOK	((1 << 9))	/* Tx AC_VI Descriptor OK Interrupt */
+#define IMR_RER		((1 << 8))	/* Rx Error Interrupt */
+#define IMR_ROK		((1 << 7))	/* Receive OK Interrupt */
+#define IMR_TBEDER	((1 << 6))	/* Tx AC_BE Descriptor Error */
+#define IMR_TBEDOK	((1 << 5))	/* Tx AC_BE Descriptor OK */
+#define IMR_TBKDER	((1 << 4))	/* Tx AC_BK Descriptor Error */
+#define IMR_TBKDOK	((1 << 3))	/* Tx AC_BK Descriptor OK */
+#define IMR_RQOSOK	((1 << 2))	/* Rx QoS OK Interrupt */
+#define IMR_TIMEOUT2	((1 << 1))	/* Time Out Interrupt 2 */
+#define IMR_TIMEOUT3	((1 << 0))	/* Time Out Interrupt 3 */
+	__le16	BEACON_INTERVAL; /* 0x70 */
+	__le16	ATIM_WND; /*  0x72 */
+	__le16	BEACON_INTERVAL_TIME; /*  0x74 */
+	__le16	ATIMTR_INTERVAL; /*  0x76 */
+	u8	PHY_DELAY; /*  0x78 */
+	u8	CARRIER_SENSE_COUNTER; /* 0x79 */
+	u8	reserved_11[2]; /* 0x7a */
+	u8	PHY[4]; /* 0x7c  */
+	__le16	RFPinsOutput; /* 0x80 */
+	__le16	RFPinsEnable; /* 0x82 */
+	__le16	RFPinsSelect; /* 0x84 */
+	__le16	RFPinsInput;  /* 0x86 */
+	__le32	RF_PARA; /*  0x88 */
+	__le32	RF_TIMING; /*  0x8c */
+	u8	GP_ENABLE; /*  0x90 */
+	u8	GPIO0; /*  0x91 */
+	u8	GPIO1; /*  0x92 */
+	u8	TPPOLL_STOP; /*  0x93 - rtl8187se only */
+#define RTL818x_TPPOLL_STOP_BQ			(1 << 7)
+#define RTL818x_TPPOLL_STOP_VI			(1 << 4)
+#define RTL818x_TPPOLL_STOP_VO			(1 << 5)
+#define RTL818x_TPPOLL_STOP_BE			(1 << 3)
+#define RTL818x_TPPOLL_STOP_BK			(1 << 2)
+#define RTL818x_TPPOLL_STOP_MG			(1 << 1)
+#define RTL818x_TPPOLL_STOP_HI			(1 << 6)
+
+	__le32	HSSI_PARA; /*  0x94 */
+	u8	reserved_13[4]; /* 0x98 */
+	u8	TX_AGC_CTL; /*  0x9c */
 #define RTL818X_TX_AGC_CTL_PERPACKET_GAIN	(1 << 0)
 #define RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL	(1 << 1)
 #define RTL818X_TX_AGC_CTL_FEEDBACK_ANT		(1 << 2)
@@ -167,7 +289,8 @@ struct rtl818x_csr {
 	u8	reserved_17[24];
 	u8	CONFIG5;
 	u8	TX_DMA_POLLING;
-	u8	reserved_18[2];
+	u8	PHY_PR;
+	u8	reserved_18;
 	__le16	CWR;
 	u8	RETRY_CTR;
 	u8	reserved_19[3];
@@ -179,14 +302,59 @@ struct rtl818x_csr {
 	__le32	RDSAR;
 	__le16	TID_AC_MAP;
 	u8	reserved_20[4];
-	u8	ANAPARAM3;
-	u8	reserved_21[5];
+	union {
+		__le16	ANAPARAM3; /* 0xee */
+		u8	ANAPARAM3A; /* for rtl8187 */
+	};
+
+#define AC_PARAM_TXOP_LIMIT_SHIFT	16
+#define AC_PARAM_ECW_MAX_SHIFT		12
+#define AC_PARAM_ECW_MIN_SHIFT		8
+#define AC_PARAM_AIFS_SHIFT		0
+
+	__le32 AC_VO_PARAM; /* 0xf0 */
+
+	union { /* 0xf4 */
+		__le32 AC_VI_PARAM;
 		__le16 FEMR;
-	u8	reserved_22[4];
-	__le16	TALLY_CNT;
-	u8	TALLY_SEL;
+	} __packed;
+
+	union{ /* 0xf8 */
+		__le32  AC_BE_PARAM; /* rtl8187se */
+		struct{
+			u8      reserved_21[2];
+			__le16	TALLY_CNT; /* 0xfa */
+		} __packed;
+	} __packed;
+
+	union {
+		u8	TALLY_SEL; /* 0xfc */
+		__le32  AC_BK_PARAM;
+
+	} __packed;
+
 } __packed;
 
+/* These are addresses with NON-standard usage.
+ * They have offsets very far from this struct.
+ * I don't like to introduce a ton of "reserved"..
+ * They are for RTL8187SE
+ */
+#define REG_ADDR1(addr)	((u8 __iomem *)(&priv->map->offset1[(addr)]))
+#define REG_ADDR2(addr)	((__le16 __iomem *)(&priv->map->offset2[((addr) >> 1)]))
+#define REG_ADDR4(addr)	((__le32 __iomem *)(&priv->map->offset4[((addr) >> 2)]))
+
+#define FEMR_SE		REG_ADDR2(0x1D4)
+#define ARFR		REG_ADDR2(0x1E0)
+#define RFSW_CTRL	REG_ADDR2(0x272)
+#define SW_3W_DB0	REG_ADDR2(0x274)
+#define SW_3W_DB0_4	REG_ADDR4(0x274)
+#define SW_3W_DB1	REG_ADDR2(0x278)
+#define SW_3W_DB1_4	REG_ADDR4(0x278)
+#define SW_3W_CMD1	REG_ADDR1(0x27D)
+#define PI_DATA_REG	REG_ADDR2(0x360)
+#define SI_DATA_REG     REG_ADDR2(0x362)
+
 struct rtl818x_rf_ops {
 	char *name;
 	void (*init)(struct ieee80211_hw *);