Commit 24ea602e authored by Albert Herranz's avatar Albert Herranz Committed by John W. Linville

ssb: Implement SDIO host bus support

Add support for communicating with a Sonics Silicon Backplane through a
SDIO interface, as found in the Nintendo Wii WLAN daughter card.

The Nintendo Wii WLAN card includes a custom Broadcom 4318 chip with
a SDIO host interface.
Signed-off-by: default avatarAlbert Herranz <albert_herranz@yahoo.es>
Signed-off-by: default avatarMichael Buesch <mb@bu3sch.de>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent f020979d
......@@ -66,6 +66,20 @@ config SSB_PCMCIAHOST
If unsure, say N
config SSB_SDIOHOST_POSSIBLE
bool
depends on SSB && (MMC = y || MMC = SSB)
default y
config SSB_SDIOHOST
bool "Support for SSB on SDIO-bus host"
depends on SSB_SDIOHOST_POSSIBLE
help
Support for a Sonics Silicon Backplane on top
of a SDIO device.
If unsure, say N
config SSB_SILENT
bool "No SSB kernel messages"
depends on SSB && EMBEDDED
......
......@@ -6,6 +6,7 @@ ssb-$(CONFIG_SSB_SPROM) += sprom.o
# host support
ssb-$(CONFIG_SSB_PCIHOST) += pci.o pcihost_wrapper.o
ssb-$(CONFIG_SSB_PCMCIAHOST) += pcmcia.o
ssb-$(CONFIG_SSB_SDIOHOST) += sdio.o
# built-in drivers
ssb-y += driver_chipcommon.o
......
......@@ -17,6 +17,7 @@
#include <linux/ssb/ssb_driver_gige.h>
#include <linux/dma-mapping.h>
#include <linux/pci.h>
#include <linux/mmc/sdio_func.h>
#include <pcmcia/cs_types.h>
#include <pcmcia/cs.h>
......@@ -88,6 +89,25 @@ struct ssb_bus *ssb_pcmcia_dev_to_bus(struct pcmcia_device *pdev)
}
#endif /* CONFIG_SSB_PCMCIAHOST */
#ifdef CONFIG_SSB_SDIOHOST
struct ssb_bus *ssb_sdio_func_to_bus(struct sdio_func *func)
{
struct ssb_bus *bus;
ssb_buses_lock();
list_for_each_entry(bus, &buses, list) {
if (bus->bustype == SSB_BUSTYPE_SDIO &&
bus->host_sdio == func)
goto found;
}
bus = NULL;
found:
ssb_buses_unlock();
return bus;
}
#endif /* CONFIG_SSB_SDIOHOST */
int ssb_for_each_bus_call(unsigned long data,
int (*func)(struct ssb_bus *bus, unsigned long data))
{
......@@ -467,6 +487,12 @@ static int ssb_devices_register(struct ssb_bus *bus)
#ifdef CONFIG_SSB_PCMCIAHOST
sdev->irq = bus->host_pcmcia->irq.AssignedIRQ;
dev->parent = &bus->host_pcmcia->dev;
#endif
break;
case SSB_BUSTYPE_SDIO:
#ifdef CONFIG_SSB_SDIO
sdev->irq = bus->host_sdio->dev.irq;
dev->parent = &bus->host_sdio->dev;
#endif
break;
case SSB_BUSTYPE_SSB:
......@@ -724,12 +750,18 @@ static int ssb_bus_register(struct ssb_bus *bus,
err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 1);
if (err)
goto out;
/* Init SDIO-host device (if any), before the scan */
err = ssb_sdio_init(bus);
if (err)
goto err_disable_xtal;
ssb_buses_lock();
bus->busnumber = next_busnumber;
/* Scan for devices (cores) */
err = ssb_bus_scan(bus, baseaddr);
if (err)
goto err_disable_xtal;
goto err_sdio_exit;
/* Init PCI-host device (if any) */
err = ssb_pci_init(bus);
......@@ -776,6 +808,8 @@ static int ssb_bus_register(struct ssb_bus *bus,
ssb_pci_exit(bus);
err_unmap:
ssb_iounmap(bus);
err_sdio_exit:
ssb_sdio_exit(bus);
err_disable_xtal:
ssb_buses_unlock();
ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 0);
......@@ -825,6 +859,28 @@ int ssb_bus_pcmciabus_register(struct ssb_bus *bus,
EXPORT_SYMBOL(ssb_bus_pcmciabus_register);
#endif /* CONFIG_SSB_PCMCIAHOST */
#ifdef CONFIG_SSB_SDIOHOST
int ssb_bus_sdiobus_register(struct ssb_bus *bus, struct sdio_func *func,
unsigned int quirks)
{
int err;
bus->bustype = SSB_BUSTYPE_SDIO;
bus->host_sdio = func;
bus->ops = &ssb_sdio_ops;
bus->quirks = quirks;
err = ssb_bus_register(bus, ssb_sdio_get_invariants, ~0);
if (!err) {
ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on "
"SDIO device %s\n", sdio_func_id(func));
}
return err;
}
EXPORT_SYMBOL(ssb_bus_sdiobus_register);
#endif /* CONFIG_SSB_PCMCIAHOST */
int ssb_bus_ssbbus_register(struct ssb_bus *bus,
unsigned long baseaddr,
ssb_invariants_func_t get_invariants)
......
......@@ -175,6 +175,9 @@ static u32 scan_read32(struct ssb_bus *bus, u8 current_coreidx,
} else
ssb_pcmcia_switch_segment(bus, 0);
break;
case SSB_BUSTYPE_SDIO:
offset += current_coreidx * SSB_CORE_SIZE;
return ssb_sdio_scan_read32(bus, offset);
}
return readl(bus->mmio + offset);
}
......@@ -188,6 +191,8 @@ static int scan_switchcore(struct ssb_bus *bus, u8 coreidx)
return ssb_pci_switch_coreidx(bus, coreidx);
case SSB_BUSTYPE_PCMCIA:
return ssb_pcmcia_switch_coreidx(bus, coreidx);
case SSB_BUSTYPE_SDIO:
return ssb_sdio_scan_switch_coreidx(bus, coreidx);
}
return 0;
}
......@@ -206,6 +211,8 @@ void ssb_iounmap(struct ssb_bus *bus)
SSB_BUG_ON(1); /* Can't reach this code. */
#endif
break;
case SSB_BUSTYPE_SDIO:
break;
}
bus->mmio = NULL;
bus->mapped_device = NULL;
......@@ -230,6 +237,10 @@ static void __iomem *ssb_ioremap(struct ssb_bus *bus,
SSB_BUG_ON(1); /* Can't reach this code. */
#endif
break;
case SSB_BUSTYPE_SDIO:
/* Nothing to ioremap in the SDIO case, just fake it */
mmio = (void __iomem *)baseaddr;
break;
}
return mmio;
......
This diff is collapsed.
......@@ -114,6 +114,46 @@ static inline int ssb_pcmcia_init(struct ssb_bus *bus)
}
#endif /* CONFIG_SSB_PCMCIAHOST */
/* sdio.c */
#ifdef CONFIG_SSB_SDIOHOST
extern int ssb_sdio_get_invariants(struct ssb_bus *bus,
struct ssb_init_invariants *iv);
extern u32 ssb_sdio_scan_read32(struct ssb_bus *bus, u16 offset);
extern int ssb_sdio_switch_core(struct ssb_bus *bus, struct ssb_device *dev);
extern int ssb_sdio_scan_switch_coreidx(struct ssb_bus *bus, u8 coreidx);
extern int ssb_sdio_hardware_setup(struct ssb_bus *bus);
extern void ssb_sdio_exit(struct ssb_bus *bus);
extern int ssb_sdio_init(struct ssb_bus *bus);
extern const struct ssb_bus_ops ssb_sdio_ops;
#else /* CONFIG_SSB_SDIOHOST */
static inline u32 ssb_sdio_scan_read32(struct ssb_bus *bus, u16 offset)
{
return 0;
}
static inline int ssb_sdio_switch_core(struct ssb_bus *bus,
struct ssb_device *dev)
{
return 0;
}
static inline int ssb_sdio_scan_switch_coreidx(struct ssb_bus *bus, u8 coreidx)
{
return 0;
}
static inline int ssb_sdio_hardware_setup(struct ssb_bus *bus)
{
return 0;
}
static inline void ssb_sdio_exit(struct ssb_bus *bus)
{
}
static inline int ssb_sdio_init(struct ssb_bus *bus)
{
return 0;
}
#endif /* CONFIG_SSB_SDIOHOST */
/* scan.c */
extern const char *ssb_core_name(u16 coreid);
......
......@@ -238,6 +238,7 @@ enum ssb_bustype {
SSB_BUSTYPE_SSB, /* This SSB bus is the system bus */
SSB_BUSTYPE_PCI, /* SSB is connected to PCI bus */
SSB_BUSTYPE_PCMCIA, /* SSB is connected to PCMCIA bus */
SSB_BUSTYPE_SDIO, /* SSB is connected to SDIO bus */
};
/* board_vendor */
......@@ -270,8 +271,12 @@ struct ssb_bus {
/* The core in the basic address register window. (PCI bus only) */
struct ssb_device *mapped_device;
union {
/* Currently mapped PCMCIA segment. (bustype == SSB_BUSTYPE_PCMCIA only) */
u8 mapped_pcmcia_seg;
/* Current SSB base address window for SDIO. */
u32 sdio_sbaddr;
};
/* Lock for core and segment switching.
* On PCMCIA-host busses this is used to protect the whole MMIO access. */
spinlock_t bar_lock;
......@@ -282,6 +287,11 @@ struct ssb_bus {
struct pci_dev *host_pci;
/* Pointer to the PCMCIA device (only if bustype == SSB_BUSTYPE_PCMCIA). */
struct pcmcia_device *host_pcmcia;
/* Pointer to the SDIO device (only if bustype == SSB_BUSTYPE_SDIO). */
struct sdio_func *host_sdio;
/* See enum ssb_quirks */
unsigned int quirks;
#ifdef CONFIG_SSB_SPROM
/* Mutex to protect the SPROM writing. */
......@@ -336,6 +346,11 @@ struct ssb_bus {
#endif /* DEBUG */
};
enum ssb_quirks {
/* SDIO connected card requires performing a read after writing a 32-bit value */
SSB_QUIRK_SDIO_READ_AFTER_WRITE32 = (1 << 0),
};
/* The initialization-invariants. */
struct ssb_init_invariants {
/* Versioning information about the PCB. */
......@@ -366,6 +381,12 @@ extern int ssb_bus_pcmciabus_register(struct ssb_bus *bus,
struct pcmcia_device *pcmcia_dev,
unsigned long baseaddr);
#endif /* CONFIG_SSB_PCMCIAHOST */
#ifdef CONFIG_SSB_SDIOHOST
extern int ssb_bus_sdiobus_register(struct ssb_bus *bus,
struct sdio_func *sdio_func,
unsigned int quirks);
#endif /* CONFIG_SSB_SDIOHOST */
extern void ssb_bus_unregister(struct ssb_bus *bus);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment