[media] az6007: convert it to use dvb-usb-v2

Change it to use dvb-usb-v2. The driver should be working as before.
The only functional changes should be at the driver debug logs.

This driver needs the cypress firmware load, so, auto-selects it.
Acked-by: Antti Palosaari <crope@iki.fi>
Reviewed-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

drivers/media/dvb/dvb-usb-v2/Kconfig

@@ -68,6 +68,15 @@ config DVB_USB_AU6610
 	help
 	  Say Y here to support the Sigmatek DVB-110 DVB-T USB2.0 receiver.
 
+config DVB_USB_AZ6007
+	tristate "AzureWave 6007 and clones DVB-T/C USB2.0 support"
+	depends on DVB_USB_V2
+	select DVB_USB_CYPRESS_FIRMWARE
+	select DVB_DRXK if !DVB_FE_CUSTOMISE
+	select MEDIA_TUNER_MT2063 if !DVB_FE_CUSTOMISE
+	help
+	  Say Y here to support the AZ6007 receivers like Terratec H7.
+
 config DVB_USB_CE6230
 	tristate "Intel CE6230 DVB-T USB2.0 support"
 	depends on DVB_USB_V2

drivers/media/dvb/dvb-usb-v2/Makefile

@@ -16,6 +16,9 @@ obj-$(CONFIG_DVB_USB_ANYSEE) += dvb-usb-anysee.o
 dvb-usb-au6610-objs = au6610.o
 obj-$(CONFIG_DVB_USB_AU6610) += dvb-usb-au6610.o
 
+dvb-usb-az6007-objs = az6007.o
+obj-$(CONFIG_DVB_USB_AZ6007) += dvb-usb-az6007.o
+
 dvb-usb-ce6230-objs = ce6230.o
 obj-$(CONFIG_DVB_USB_CE6230) += dvb-usb-ce6230.o
 

drivers/media/dvb/dvb-usb/Kconfig

@@ -296,14 +296,6 @@ config DVB_USB_FRIIO
 	help
 	  Say Y here to support the Japanese DTV receiver Friio.
 
-config DVB_USB_AZ6007
-	tristate "AzureWave 6007 and clones DVB-T/C USB2.0 support"
-	depends on DVB_USB
-	select DVB_DRXK if !DVB_FE_CUSTOMISE
-	select MEDIA_TUNER_MT2063 if !DVB_FE_CUSTOMISE
-	help
-	  Say Y here to support theAfatech AF9005 based DVB-T/DVB-C receivers.
-
 config DVB_USB_AZ6027
 	tristate "Azurewave DVB-S/S2 USB2.0 AZ6027 support"
 	depends on DVB_USB

drivers/media/dvb/dvb-usb/Makefile

@@ -69,9 +69,6 @@ obj-$(CONFIG_DVB_USB_CINERGY_T2) += dvb-usb-cinergyT2.o
 dvb-usb-friio-objs = friio.o friio-fe.o
 obj-$(CONFIG_DVB_USB_FRIIO) += dvb-usb-friio.o
 
-dvb-usb-az6007-objs = az6007.o
-obj-$(CONFIG_DVB_USB_AZ6007) += dvb-usb-az6007.o
-
 dvb-usb-az6027-objs = az6027.o
 obj-$(CONFIG_DVB_USB_AZ6027) += dvb-usb-az6027.o