Commit 27eb552e authored by Bartosz Golaszewski's avatar Bartosz Golaszewski Committed by Bjorn Andersson

arm64: dts: qcom: sa8775p-ride: enable EMAC1

Enable the second MAC on sa8775p-ride.
Signed-off-by: default avatarBartosz Golaszewski <bartosz.golaszewski@linaro.org>
Tested-by: default avatarAndrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20230810080909.6259-10-brgl@bgdev.plSigned-off-by: default avatarBjorn Andersson <andersson@kernel.org>
parent fdc051e3
...@@ -17,6 +17,7 @@ / { ...@@ -17,6 +17,7 @@ / {
aliases { aliases {
ethernet0 = &ethernet0; ethernet0 = &ethernet0;
ethernet1 = &ethernet1;
i2c11 = &i2c11; i2c11 = &i2c11;
i2c18 = &i2c18; i2c18 = &i2c18;
serial0 = &uart10; serial0 = &uart10;
...@@ -359,6 +360,76 @@ queue3 { ...@@ -359,6 +360,76 @@ queue3 {
}; };
}; };
&ethernet1 {
phy-mode = "sgmii";
phy-handle = <&sgmii_phy1>;
snps,mtl-rx-config = <&mtl_rx_setup1>;
snps,mtl-tx-config = <&mtl_tx_setup1>;
snps,ps-speed = <1000>;
status = "okay";
mtl_rx_setup1: rx-queues-config {
snps,rx-queues-to-use = <4>;
snps,rx-sched-sp;
queue0 {
snps,dcb-algorithm;
snps,map-to-dma-channel = <0x0>;
snps,route-up;
snps,priority = <0x1>;
};
queue1 {
snps,dcb-algorithm;
snps,map-to-dma-channel = <0x1>;
snps,route-ptp;
};
queue2 {
snps,avb-algorithm;
snps,map-to-dma-channel = <0x2>;
snps,route-avcp;
};
queue3 {
snps,avb-algorithm;
snps,map-to-dma-channel = <0x3>;
snps,priority = <0xc>;
};
};
mtl_tx_setup1: tx-queues-config {
snps,tx-queues-to-use = <4>;
snps,tx-sched-sp;
queue0 {
snps,dcb-algorithm;
};
queue1 {
snps,dcb-algorithm;
};
queue2 {
snps,avb-algorithm;
snps,send_slope = <0x1000>;
snps,idle_slope = <0x1000>;
snps,high_credit = <0x3e800>;
snps,low_credit = <0xffc18000>;
};
queue3 {
snps,avb-algorithm;
snps,send_slope = <0x1000>;
snps,idle_slope = <0x1000>;
snps,high_credit = <0x3e800>;
snps,low_credit = <0xffc18000>;
};
};
};
&i2c11 { &i2c11 {
clock-frequency = <400000>; clock-frequency = <400000>;
pinctrl-0 = <&qup_i2c11_default>; pinctrl-0 = <&qup_i2c11_default>;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment