Commit 280dedb8 authored by Bjorn Helgaas's avatar Bjorn Helgaas Committed by Linus Torvalds

[PATCH] PCDP: handle tables that don't supply baud rate

The HCDP specs (i.e., PCDP revision < 3) allow zero as a default value for
baud rate and data bits.  So if firmware doesn't supply them, let
early_serial_console_init() probe for them rather than telling it the baud
rate is zero.

Also, update the URL for the PCDP spec.
Signed-off-by: default avatarBjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
parent bb93e3a5
...@@ -23,12 +23,15 @@ setup_serial_console(struct pcdp_uart *uart) ...@@ -23,12 +23,15 @@ setup_serial_console(struct pcdp_uart *uart)
{ {
#ifdef CONFIG_SERIAL_8250_CONSOLE #ifdef CONFIG_SERIAL_8250_CONSOLE
int mmio; int mmio;
static char options[64]; static char options[64], *p = options;
mmio = (uart->addr.address_space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY); mmio = (uart->addr.address_space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY);
snprintf(options, sizeof(options), "console=uart,%s,0x%lx,%lun%d", p += sprintf(p, "console=uart,%s,0x%lx",
mmio ? "mmio" : "io", uart->addr.address, uart->baud, mmio ? "mmio" : "io", uart->addr.address);
uart->bits ? uart->bits : 8); if (uart->baud)
p += sprintf(p, ",%lu", uart->baud);
if (uart->bits)
p += sprintf(p, "n%d", uart->bits);
return early_serial_console_init(options); return early_serial_console_init(options);
#else #else
......
...@@ -2,7 +2,7 @@ ...@@ -2,7 +2,7 @@
* Definitions for PCDP-defined console devices * Definitions for PCDP-defined console devices
* *
* v1.0a: http://www.dig64.org/specifications/DIG64_HCDPv10a_01.pdf * v1.0a: http://www.dig64.org/specifications/DIG64_HCDPv10a_01.pdf
* v2.0: http://www.dig64.org/specifications/DIG64_HCDPv20_042804.pdf * v2.0: http://www.dig64.org/specifications/DIG64_PCDPv20.pdf
* *
* (c) Copyright 2002, 2004 Hewlett-Packard Development Company, L.P. * (c) Copyright 2002, 2004 Hewlett-Packard Development Company, L.P.
* Khalid Aziz <khalid.aziz@hp.com> * Khalid Aziz <khalid.aziz@hp.com>
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment