Commit 284e4238 authored by Marcello Maggioni's avatar Marcello Maggioni Committed by Bartlomiej Zolnierkiewicz

[PATCH] timeout at boottime with NEC3500A (and possibly others) when inserted a CD in it

From: Marcello Maggioni <hayarms@gmail.com>

Problem: Some drives (NEC 3500, TDK 1616N, Mad-dog MD-16XDVD9, RICOH
MP5163DA, Memorex DVD9 drive and IO-DATA's too for sure), if a
CD/DVD is inserted into the tray when the system is booted and if
before the OS bootup the BIOS checked for the presence of a bootable
CD/DVD into the drive, during the IDE probe phase the drive may
result busy and remain so for the next 25/30 seconds . This cause the
drive to be skipped during the booting phase and not begin usable
until the next reboot (if the reboot goes well and the drive doesn't
timeout again).

Solution: Rising the timeout time from 10 seconds to 35 seconds
(during these 35 seconds every drive should wake up for sure
according to the tests I've done).
Signed-off-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>
parent 41bb4c43
...@@ -697,13 +697,13 @@ static int wait_hwif_ready(ide_hwif_t *hwif) ...@@ -697,13 +697,13 @@ static int wait_hwif_ready(ide_hwif_t *hwif)
SELECT_DRIVE(&hwif->drives[0]); SELECT_DRIVE(&hwif->drives[0]);
hwif->OUTB(8, hwif->io_ports[IDE_CONTROL_OFFSET]); hwif->OUTB(8, hwif->io_ports[IDE_CONTROL_OFFSET]);
mdelay(2); mdelay(2);
rc = ide_wait_not_busy(hwif, 10000); rc = ide_wait_not_busy(hwif, 35000);
if (rc) if (rc)
return rc; return rc;
SELECT_DRIVE(&hwif->drives[1]); SELECT_DRIVE(&hwif->drives[1]);
hwif->OUTB(8, hwif->io_ports[IDE_CONTROL_OFFSET]); hwif->OUTB(8, hwif->io_ports[IDE_CONTROL_OFFSET]);
mdelay(2); mdelay(2);
rc = ide_wait_not_busy(hwif, 10000); rc = ide_wait_not_busy(hwif, 35000);
/* Exit function with master reselected (let's be sane) */ /* Exit function with master reselected (let's be sane) */
SELECT_DRIVE(&hwif->drives[0]); SELECT_DRIVE(&hwif->drives[0]);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment