net/mlx5e: Enhance ICOSQ WQE info fields

The same WQE opcode might be used in different ICOSQ flows
and WQE types.
To have a better distinguishability, replace it with an enum that
better indicates the WQE type and flow it is used for.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

drivers/net/ethernet/mellanox/mlx5/core/en/txrx.h

@@ -27,6 +27,11 @@
 
 #define INL_HDR_START_SZ (sizeof(((struct mlx5_wqe_eth_seg *)NULL)->inline_hdr.start))
 
+enum mlx5e_icosq_wqe_type {
+	MLX5E_ICOSQ_WQE_NOP,
+	MLX5E_ICOSQ_WQE_UMR_RX,
+};
+
 static inline bool
 mlx5e_wqc_has_room_for(struct mlx5_wq_cyc *wq, u16 cc, u16 pc, u16 n)
 {
@@ -120,10 +125,10 @@ static inline u16 mlx5e_txqsq_get_next_pi(struct mlx5e_txqsq *sq, u16 size)
 }
 
 struct mlx5e_icosq_wqe_info {
-	u8 opcode;
+	u8 wqe_type;
 	u8 num_wqebbs;
 
-	/* Auxiliary data for different opcodes. */
+	/* Auxiliary data for different wqe types. */
 	union {
 		struct {
 			struct mlx5e_rq *rq;
@@ -147,7 +152,7 @@ static inline u16 mlx5e_icosq_get_next_pi(struct mlx5e_icosq *sq, u16 size)
 		/* Fill SQ frag edge with NOPs to avoid WQE wrapping two pages. */
 		for (; wi < edge_wi; wi++) {
 			*wi = (struct mlx5e_icosq_wqe_info) {
-				.opcode = MLX5_OPCODE_NOP,
+				.wqe_type   = MLX5E_ICOSQ_WQE_NOP,
 				.num_wqebbs = 1,
 			};
 			mlx5e_post_nop(wq, sq->sqn, &sq->pc);

drivers/net/ethernet/mellanox/mlx5/core/en_rx.c

@@ -506,7 +506,7 @@ static int mlx5e_alloc_rx_mpwqe(struct mlx5e_rq *rq, u16 ix)
 	umr_wqe->uctrl.xlt_offset = cpu_to_be16(xlt_offset);
 
 	sq->db.wqe_info[pi] = (struct mlx5e_icosq_wqe_info) {
-		.opcode     = MLX5_OPCODE_UMR,
+		.wqe_type   = MLX5E_ICOSQ_WQE_UMR_RX,
 		.num_wqebbs = MLX5E_UMR_WQEBBS,
 		.umr.rq     = rq,
 	};
@@ -619,15 +619,18 @@ int mlx5e_poll_ico_cq(struct mlx5e_cq *cq)
 				break;
 			}
 
-			if (likely(wi->opcode == MLX5_OPCODE_UMR))
+			switch (wi->wqe_type) {
+			case MLX5E_ICOSQ_WQE_UMR_RX:
 				wi->umr.rq->mpwqe.umr_completed++;
-			else if (unlikely(wi->opcode != MLX5_OPCODE_NOP))
+				break;
+			case MLX5E_ICOSQ_WQE_NOP:
+				break;
+			default:
 				netdev_WARN_ONCE(cq->channel->netdev,
-						 "Bad OPCODE in ICOSQ WQE info: 0x%x\n",
-						 wi->opcode);
-
+						 "Bad WQE type in ICOSQ WQE info: 0x%x\n",
+						 wi->wqe_type);
+			}
 		} while (!last_wqe);
-
 	} while ((++i < MLX5E_TX_CQ_POLL_BUDGET) && (cqe = mlx5_cqwq_get_cqe(&cq->wq)));
 
 	sq->cc = sqcc;

drivers/net/ethernet/mellanox/mlx5/core/en_txrx.c

@@ -79,7 +79,7 @@ void mlx5e_trigger_irq(struct mlx5e_icosq *sq)
 	u16 pi = mlx5_wq_cyc_ctr2ix(wq, sq->pc);
 
 	sq->db.wqe_info[pi] = (struct mlx5e_icosq_wqe_info) {
-		.opcode     = MLX5_OPCODE_NOP,
+		.wqe_type   = MLX5E_ICOSQ_WQE_NOP,
 		.num_wqebbs = 1,
 	};