ide: remove ide_setup_ports()

ide-cris.c:
* Add cris_setup_ports() helper and use it instead of ide_setup_ports()
  (fixes random value being set in ->io_ports[IDE_IRQ_OFFSET]).

buddha.c:
* Add buddha_setup_ports() helper and use it instead of ide_setup_ports().

falconide.c:
* Add falconide_setup_ports() helper and use it instead of ide_setup_ports(),
  also fix return value of falconide_init() while at it.

gayle.c:
* Add gayle_setup_ports() helper and use it instead of ide_setup_ports().

macide.c:
* Add macide_setup_ports() helper and use it instead of ide_setup_ports()
  (fixes incorrect value being set in ->io_ports[IDE_IRQ_OFFSET]).

q40ide.c:
* Fix q40_ide_setup_ports() comments.

ide.c:
* Remove no longer needed ide_setup_ports().

Cc: Mikael Starvik <starvik@axis.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
parent f2694b7e
......@@ -753,6 +753,25 @@ static void cris_set_dma_mode(ide_drive_t *drive, const u8 speed)
cris_ide_set_speed(TYPE_DMA, 0, strobe, hold);
}
static void __init cris_setup_ports(hw_regs_t *hw, unsigned long base)
{
int i;
memset(hw, 0, sizeof(*hw));
for (i = 0; i <= 7; i++)
hw->io_ports[i] = base + cris_ide_reg_addr(i, 0, 1);
/*
* the IDE control register is at ATA address 6,
* with CS1 active instead of CS0
*/
hw->io_ports[IDE_CONTROL_OFFSET] = base + cris_ide_reg_addr(6, 1, 0);
hw->irq = ide_default_irq(0);
hw->ack_intr = cris_ide_ack_intr;
}
static const struct ide_port_info cris_port_info __initdata = {
.chipset = ide_etrax100,
.host_flags = IDE_HFLAG_NO_ATAPI_DMA |
......@@ -765,24 +784,16 @@ static const struct ide_port_info cris_port_info __initdata = {
static int __init init_e100_ide(void)
{
hw_regs_t hw;
int ide_offsets[IDE_NR_PORTS], h, i;
int h;
u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
printk("ide: ETRAX FS built-in ATA DMA controller\n");
for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++)
ide_offsets[i] = cris_ide_reg_addr(i, 0, 1);
/* the IDE control register is at ATA address 6, with CS1 active instead of CS0 */
ide_offsets[IDE_CONTROL_OFFSET] = cris_ide_reg_addr(6, 1, 0);
for (h = 0; h < 4; h++) {
ide_hwif_t *hwif = NULL;
ide_setup_ports(&hw, cris_ide_base_address(h),
ide_offsets,
0, 0, cris_ide_ack_intr,
ide_default_irq(0));
cris_setup_ports(&hw, cris_ide_base_address(h));
hwif = ide_find_port(hw.io_ports[IDE_DATA_OFFSET]);
if (hwif == NULL)
continue;
......
......@@ -618,60 +618,6 @@ void ide_unregister(unsigned int index, int init_default, int restore)
EXPORT_SYMBOL(ide_unregister);
/**
* ide_setup_ports - set up IDE interface ports
* @hw: register descriptions
* @base: base register
* @offsets: table of register offsets
* @ctrl: control register
* @ack_irq: IRQ ack
* @irq: interrupt lie
*
* Setup hw_regs_t structure described by parameters. You
* may set up the hw structure yourself OR use this routine to
* do it for you. This is basically a helper
*
*/
void ide_setup_ports ( hw_regs_t *hw,
unsigned long base, int *offsets,
unsigned long ctrl, unsigned long intr,
ide_ack_intr_t *ack_intr,
/*
* ide_io_ops_t *iops,
*/
int irq)
{
int i;
memset(hw, 0, sizeof(hw_regs_t));
for (i = 0; i < IDE_NR_PORTS; i++) {
if (offsets[i] == -1) {
switch(i) {
case IDE_CONTROL_OFFSET:
hw->io_ports[i] = ctrl;
break;
#if defined(CONFIG_AMIGA) || defined(CONFIG_MAC)
case IDE_IRQ_OFFSET:
hw->io_ports[i] = intr;
break;
#endif /* (CONFIG_AMIGA) || (CONFIG_MAC) */
default:
hw->io_ports[i] = 0;
break;
}
} else {
hw->io_ports[i] = base + offsets[i];
}
}
hw->irq = irq;
hw->ack_intr = ack_intr;
/*
* hw->iops = iops;
*/
}
void ide_init_port_hw(ide_hwif_t *hwif, hw_regs_t *hw)
{
memcpy(hwif->io_ports, hw->io_ports, sizeof(hwif->io_ports));
......
......@@ -56,31 +56,11 @@ static u_int xsurf_bases[XSURF_NUM_HWIFS] __initdata = {
XSURF_BASE1, XSURF_BASE2
};
/*
* Offsets from one of the above bases
*/
#define BUDDHA_DATA 0x00
#define BUDDHA_ERROR 0x06 /* see err-bits */
#define BUDDHA_NSECTOR 0x0a /* nr of sectors to read/write */
#define BUDDHA_SECTOR 0x0e /* starting sector */
#define BUDDHA_LCYL 0x12 /* starting cylinder */
#define BUDDHA_HCYL 0x16 /* high byte of starting cyl */
#define BUDDHA_SELECT 0x1a /* 101dhhhh , d=drive, hhhh=head */
#define BUDDHA_STATUS 0x1e /* see status-bits */
#define BUDDHA_CONTROL 0x11a
#define XSURF_CONTROL -1 /* X-Surf has no CS1* (Control/AltStat) */
static int buddha_offsets[IDE_NR_PORTS] __initdata = {
BUDDHA_DATA, BUDDHA_ERROR, BUDDHA_NSECTOR, BUDDHA_SECTOR, BUDDHA_LCYL,
BUDDHA_HCYL, BUDDHA_SELECT, BUDDHA_STATUS, BUDDHA_CONTROL, -1
};
static int xsurf_offsets[IDE_NR_PORTS] __initdata = {
BUDDHA_DATA, BUDDHA_ERROR, BUDDHA_NSECTOR, BUDDHA_SECTOR, BUDDHA_LCYL,
BUDDHA_HCYL, BUDDHA_SELECT, BUDDHA_STATUS, XSURF_CONTROL, -1
};
/*
* Other registers
......@@ -140,6 +120,26 @@ static int xsurf_ack_intr(ide_hwif_t *hwif)
return 1;
}
static void __init buddha_setup_ports(hw_regs_t *hw, unsigned long base,
unsigned long ctl, unsigned long irq_port,
ide_ack_intr_t *ack_intr)
{
int i;
memset(hw, 0, sizeof(*hw));
hw->io_ports[IDE_DATA_OFFSET] = base;
for (i = 1; i < 8; i++)
hw->io_ports[i] = base + 2 + i * 4;
hw->io_ports[IDE_CONTROL_OFFSET] = ctl;
hw->io_ports[IDE_IRQ_OFFSET] = irq_port;
hw->irq = IRQ_AMIGA_PORTS;
hw->ack_intr = ack_intr;
}
/*
* Probe for a Buddha or Catweasel IDE interface
*/
......@@ -202,23 +202,25 @@ static int __init buddha_init(void)
printk(KERN_INFO "ide: %s IDE controller\n",
buddha_board_name[type]);
for(i=0;i<buddha_num_hwifs;i++) {
if(type != BOARD_XSURF) {
ide_setup_ports(&hw, (buddha_board+buddha_bases[i]),
buddha_offsets, 0,
(buddha_board+buddha_irqports[i]),
buddha_ack_intr,
// budda_iops,
IRQ_AMIGA_PORTS);
for (i = 0; i < buddha_num_hwifs; i++) {
unsigned long base, ctl, irq_port;
ide_ack_intr_t *ack_intr;
if (type != BOARD_XSURF) {
base = buddha_board + buddha_bases[i];
ctl = base + BUDDHA_CONTROL;
irq_port = buddha_board + buddha_irqports[i];
ack_intr = buddha_ack_intr;
} else {
ide_setup_ports(&hw, (buddha_board+xsurf_bases[i]),
xsurf_offsets, 0,
(buddha_board+xsurf_irqports[i]),
xsurf_ack_intr,
// xsurf_iops,
IRQ_AMIGA_PORTS);
base = buddha_board + xsurf_bases[i];
/* X-Surf has no CS1* (Control/AltStat) */
ctl = 0;
irq_port = buddha_board + xsurf_irqports[i];
ack_intr = xsurf_ack_intr;
}
buddha_setup_ports(&hw, base, ctl, irq_port, ack_intr);
hwif = ide_find_port(hw.io_ports[IDE_DATA_OFFSET]);
if (hwif) {
u8 index = hwif->index;
......
......@@ -33,22 +33,8 @@
* Offsets from the above base
*/
#define ATA_HD_DATA 0x00
#define ATA_HD_ERROR 0x05 /* see err-bits */
#define ATA_HD_NSECTOR 0x09 /* nr of sectors to read/write */
#define ATA_HD_SECTOR 0x0d /* starting sector */
#define ATA_HD_LCYL 0x11 /* starting cylinder */
#define ATA_HD_HCYL 0x15 /* high byte of starting cyl */
#define ATA_HD_SELECT 0x19 /* 101dhhhh , d=drive, hhhh=head */
#define ATA_HD_STATUS 0x1d /* see status-bits */
#define ATA_HD_CONTROL 0x39
static int falconide_offsets[IDE_NR_PORTS] __initdata = {
ATA_HD_DATA, ATA_HD_ERROR, ATA_HD_NSECTOR, ATA_HD_SECTOR, ATA_HD_LCYL,
ATA_HD_HCYL, ATA_HD_SELECT, ATA_HD_STATUS, ATA_HD_CONTROL, -1
};
/*
* falconide_intr_lock is used to obtain access to the IDE interrupt,
* which is shared between several drivers.
......@@ -57,6 +43,22 @@ static int falconide_offsets[IDE_NR_PORTS] __initdata = {
int falconide_intr_lock;
EXPORT_SYMBOL(falconide_intr_lock);
static void __init falconide_setup_ports(hw_regs_t *hw)
{
int i;
memset(hw, 0, sizeof(*hw));
hw->io_ports[IDE_DATA_OFFSET] = ATA_HD_BASE;
for (i = 1; i < 8; i++)
hw->io_ports[i] = ATA_HD_BASE + 1 + i * 4;
hw->io_ports[IDE_CONTROL_OFFSET] = ATA_HD_CONTROL;
hw->irq = IRQ_MFP_IDE;
hw->ack_intr = NULL;
}
/*
* Probe for a Falcon IDE interface
......@@ -64,16 +66,15 @@ EXPORT_SYMBOL(falconide_intr_lock);
static int __init falconide_init(void)
{
if (MACH_IS_ATARI && ATARIHW_PRESENT(IDE)) {
hw_regs_t hw;
ide_hwif_t *hwif;
if (!MACH_IS_ATARI || !ATARIHW_PRESENT(IDE))
return 0;
printk(KERN_INFO "ide: Falcon IDE controller\n");
ide_setup_ports(&hw, ATA_HD_BASE, falconide_offsets,
0, 0, NULL,
// falconide_iops,
IRQ_MFP_IDE);
falconide_setup_ports(&hw);
hwif = ide_find_port(hw.io_ports[IDE_DATA_OFFSET]);
if (hwif) {
......@@ -85,7 +86,6 @@ static int __init falconide_init(void)
ide_device_add(idx, NULL);
}
}
return 0;
}
......
......@@ -34,22 +34,8 @@
* Offsets from one of the above bases
*/
#define GAYLE_DATA 0x00
#define GAYLE_ERROR 0x06 /* see err-bits */
#define GAYLE_NSECTOR 0x0a /* nr of sectors to read/write */
#define GAYLE_SECTOR 0x0e /* starting sector */
#define GAYLE_LCYL 0x12 /* starting cylinder */
#define GAYLE_HCYL 0x16 /* high byte of starting cyl */
#define GAYLE_SELECT 0x1a /* 101dhhhh , d=drive, hhhh=head */
#define GAYLE_STATUS 0x1e /* see status-bits */
#define GAYLE_CONTROL 0x101a
static int gayle_offsets[IDE_NR_PORTS] __initdata = {
GAYLE_DATA, GAYLE_ERROR, GAYLE_NSECTOR, GAYLE_SECTOR, GAYLE_LCYL,
GAYLE_HCYL, GAYLE_SELECT, GAYLE_STATUS, -1, -1
};
/*
* These are at different offsets from the base
*/
......@@ -106,6 +92,26 @@ static int gayle_ack_intr_a1200(ide_hwif_t *hwif)
return 1;
}
static void __init gayle_setup_ports(hw_regs_t *hw, unsigned long base,
unsigned long ctl, unsigned long irq_port,
ide_ack_intr_t *ack_intr);
{
int i;
memset(hw, 0, sizeof(*hw));
hw->io_ports[IDE_DATA_OFFSET] = base;
for (i = 1; i < 8; i++)
hw->io_ports[i] = base + 2 + i * 4;
hw->io_ports[IDE_CONTROL_OFFSET] = ctl;
hw->io_ports[IDE_IRQ_OFFSET] = irq_port;
hw->irq = IRQ_AMIGA_PORTS;
hw->ack_intr = ack_intr;
}
/*
* Probe for a Gayle IDE interface (and optionally for an IDE doubler)
*/
......@@ -167,10 +173,7 @@ static int __init gayle_init(void)
base = (unsigned long)ZTWO_VADDR(phys_base);
ctrlport = GAYLE_HAS_CONTROL_REG ? (base + GAYLE_CONTROL) : 0;
ide_setup_ports(&hw, base, gayle_offsets,
ctrlport, irqport, ack_intr,
// &gayle_iops,
IRQ_AMIGA_PORTS);
gayle_setup_ports(&hw, base, ctrlport, irqport, ack_intr);
hwif = ide_find_port(base);
if (hwif) {
......
......@@ -31,14 +31,6 @@
* These match MkLinux so they should be correct.
*/
#define IDE_DATA 0x00
#define IDE_ERROR 0x04 /* see err-bits */
#define IDE_NSECTOR 0x08 /* nr of sectors to read/write */
#define IDE_SECTOR 0x0c /* starting sector */
#define IDE_LCYL 0x10 /* starting cylinder */
#define IDE_HCYL 0x14 /* high byte of starting cyl */
#define IDE_SELECT 0x18 /* 101dhhhh , d=drive, hhhh=head */
#define IDE_STATUS 0x1c /* see status-bits */
#define IDE_CONTROL 0x38 /* control/altstatus */
/*
......@@ -63,11 +55,6 @@
volatile unsigned char *ide_ifr = (unsigned char *) (IDE_BASE + IDE_IFR);
static int macide_offsets[IDE_NR_PORTS] = {
IDE_DATA, IDE_ERROR, IDE_NSECTOR, IDE_SECTOR, IDE_LCYL,
IDE_HCYL, IDE_SELECT, IDE_STATUS, IDE_CONTROL
};
int macide_ack_intr(ide_hwif_t* hwif)
{
if (*ide_ifr & 0x20) {
......@@ -77,6 +64,22 @@ int macide_ack_intr(ide_hwif_t* hwif)
return 0;
}
static void __init macide_setup_ports(hw_regs_t *hw, unsigned long base,
int irq, ide_ack_intr_t *ack_intr)
{
int i;
memset(hw, 0, sizeof(*hw));
for (i = 0; i < 8; i++)
hw->io_ports[i] = base + i * 4;
hw->io_ports[IDE_CONTROL_OFFSET] = IDE_CONTROL;
hw->irq = irq;
hw->ack_intr = ack_intr;
}
static const char *mac_ide_name[] =
{ "Quadra", "Powerbook", "Powerbook Baboon" };
......@@ -86,27 +89,27 @@ static const char *mac_ide_name[] =
static int __init macide_init(void)
{
hw_regs_t hw;
ide_hwif_t *hwif;
ide_ack_intr_t *ack_intr;
unsigned long base;
int irq;
hw_regs_t hw;
switch (macintosh_config->ide_type) {
case MAC_IDE_QUADRA:
ide_setup_ports(&hw, IDE_BASE, macide_offsets,
0, 0, macide_ack_intr,
// quadra_ide_iops,
IRQ_NUBUS_F);
base = IDE_BASE;
ack_intr = macide_ack_intr;
irq = IRQ_NUBUS_F;
break;
case MAC_IDE_PB:
ide_setup_ports(&hw, IDE_BASE, macide_offsets,
0, 0, macide_ack_intr,
// macide_pb_iops,
IRQ_NUBUS_C);
base = IDE_BASE;
ack_intr = macide_ack_intr;
irq = IRQ_NUBUS_C;
break;
case MAC_IDE_BABOON:
ide_setup_ports(&hw, BABOON_BASE, macide_offsets,
0, 0, NULL,
// macide_baboon_iops,
IRQ_BABOON_1);
base = BABOON_BASE;
ack_intr = NULL;
irq = IRQ_BABOON_1;
break;
default:
return -ENODEV;
......@@ -115,6 +118,8 @@ static int __init macide_init(void)
printk(KERN_INFO "ide: Macintosh %s IDE controller\n",
mac_ide_name[macintosh_config->ide_type - 1]);
macide_setup_ports(&hw, base, irq, ack_intr);
hwif = ide_find_port(hw.io_ports[IDE_DATA_OFFSET]);
if (hwif) {
u8 index = hwif->index;
......
......@@ -66,16 +66,12 @@ static int q40ide_default_irq(unsigned long base)
/*
* This is very similar to ide_setup_ports except that addresses
* are pretranslated for q40 ISA access
* Addresses are pretranslated for Q40 ISA access.
*/
void q40_ide_setup_ports ( hw_regs_t *hw,
unsigned long base, int *offsets,
unsigned long ctrl, unsigned long intr,
ide_ack_intr_t *ack_intr,
/*
* ide_io_ops_t *iops,
*/
int irq)
{
int i;
......@@ -92,9 +88,6 @@ void q40_ide_setup_ports ( hw_regs_t *hw,
hw->irq = irq;
hw->ack_intr = ack_intr;
/*
* hw->iops = iops;
*/
}
......
......@@ -194,17 +194,6 @@ struct ide_drive_s;
int ide_register_hw(hw_regs_t *, void (*)(struct ide_drive_s *),
struct hwif_s **);
void ide_setup_ports( hw_regs_t *hw,
unsigned long base,
int *offsets,
unsigned long ctrl,
unsigned long intr,
ide_ack_intr_t *ack_intr,
#if 0
ide_io_ops_t *iops,
#endif
int irq);
static inline void ide_std_init_ports(hw_regs_t *hw,
unsigned long io_addr,
unsigned long ctl_addr)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment