Merge tag 'gpio-v5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO fixes from Linus Walleij:
 "Some GPIO fixes I've collected with the help of Bartosz.

  Nothing special about them: all are driver and kbuild fixes + some
  documentation fixes:

   - Tidy up a missed function call in the designware driver when
     converting to gpiolib irqchip

   - Fix some bitmasks in the Aspeed driver

   - Fix some kerneldoc warnings and minor bugs in the improved
     userspace API documentation

   - Revert the revert of the OMAP fix for lost edge wakeup interrupts:
     the fix needs to stay in

   - Fix a compile error when deselecting the character device

   - A bunch of IRQ fixes on the idio GPIO drivers

   - Fix an off-by-one error in the SiFive GPIO driver"

* tag 'gpio-v5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpio: sifive: Fix SiFive gpio probe
  gpio: pcie-idio-24: Enable PEX8311 interrupts
  gpio: pcie-idio-24: Fix IRQ Enable Register value
  gpio: pcie-idio-24: Fix irq mask when masking
  gpiolib: fix sysfs when cdev is not selected
  Revert "Revert "gpio: omap: Fix lost edge wake-up interrupts""
  gpio: uapi: clarify the meaning of 'empty' char arrays
  gpio: uapi: remove whitespace
  gpio: uapi: kernel-doc formatting improvements
  gpio: uapi: comment consistency
  gpio: uapi: fix kernel-doc warnings
  gpio: aspeed: fix ast2600 bank properties
  gpio: dwapb: Fix missing conversion to GPIO-lib-based IRQ-chip

drivers/gpio/gpio-aspeed.c

@@ -1114,6 +1114,7 @@ static const struct aspeed_gpio_config ast2500_config =
 
 static const struct aspeed_bank_props ast2600_bank_props[] = {
 	/*     input	  output   */
+	{4, 0xffffffff,  0x00ffffff}, /* Q/R/S/T */
 	{5, 0xffffffff,  0xffffff00}, /* U/V/W/X */
 	{6, 0x0000ffff,  0x0000ffff}, /* Y/Z */
 	{ },

drivers/gpio/gpio-dwapb.c

@@ -343,8 +343,8 @@ static int dwapb_irq_set_type(struct irq_data *d, u32 type)
 #ifdef CONFIG_PM_SLEEP
 static int dwapb_irq_set_wake(struct irq_data *d, unsigned int enable)
 {
-	struct irq_chip_generic *igc = irq_data_get_irq_chip_data(d);
-	struct dwapb_gpio *gpio = igc->private;
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct dwapb_gpio *gpio = to_dwapb_gpio(gc);
 	struct dwapb_context *ctx = gpio->ports[0].ctx;
 	irq_hw_number_t bit = irqd_to_hwirq(d);
 

drivers/gpio/gpio-omap.c

@@ -1114,13 +1114,23 @@ static void omap_gpio_idle(struct gpio_bank *bank, bool may_lose_context)
 {
 	struct device *dev = bank->chip.parent;
 	void __iomem *base = bank->base;
-	u32 nowake;
+	u32 mask, nowake;
 
 	bank->saved_datain = readl_relaxed(base + bank->regs->datain);
 
 	if (!bank->enabled_non_wakeup_gpios)
 		goto update_gpio_context_count;
 
+	/* Check for pending EDGE_FALLING, ignore EDGE_BOTH */
+	mask = bank->enabled_non_wakeup_gpios & bank->context.fallingdetect;
+	mask &= ~bank->context.risingdetect;
+	bank->saved_datain |= mask;
+
+	/* Check for pending EDGE_RISING, ignore EDGE_BOTH */
+	mask = bank->enabled_non_wakeup_gpios & bank->context.risingdetect;
+	mask &= ~bank->context.fallingdetect;
+	bank->saved_datain &= ~mask;
+
 	if (!may_lose_context)
 		goto update_gpio_context_count;
 

drivers/gpio/gpio-pcie-idio-24.c

@@ -28,6 +28,47 @@
 #include <linux/spinlock.h>
 #include <linux/types.h>
 
+/*
+ * PLX PEX8311 PCI LCS_INTCSR Interrupt Control/Status
+ *
+ * Bit: Description
+ *   0: Enable Interrupt Sources (Bit 0)
+ *   1: Enable Interrupt Sources (Bit 1)
+ *   2: Generate Internal PCI Bus Internal SERR# Interrupt
+ *   3: Mailbox Interrupt Enable
+ *   4: Power Management Interrupt Enable
+ *   5: Power Management Interrupt
+ *   6: Slave Read Local Data Parity Check Error Enable
+ *   7: Slave Read Local Data Parity Check Error Status
+ *   8: Internal PCI Wire Interrupt Enable
+ *   9: PCI Express Doorbell Interrupt Enable
+ *  10: PCI Abort Interrupt Enable
+ *  11: Local Interrupt Input Enable
+ *  12: Retry Abort Enable
+ *  13: PCI Express Doorbell Interrupt Active
+ *  14: PCI Abort Interrupt Active
+ *  15: Local Interrupt Input Active
+ *  16: Local Interrupt Output Enable
+ *  17: Local Doorbell Interrupt Enable
+ *  18: DMA Channel 0 Interrupt Enable
+ *  19: DMA Channel 1 Interrupt Enable
+ *  20: Local Doorbell Interrupt Active
+ *  21: DMA Channel 0 Interrupt Active
+ *  22: DMA Channel 1 Interrupt Active
+ *  23: Built-In Self-Test (BIST) Interrupt Active
+ *  24: Direct Master was the Bus Master during a Master or Target Abort
+ *  25: DMA Channel 0 was the Bus Master during a Master or Target Abort
+ *  26: DMA Channel 1 was the Bus Master during a Master or Target Abort
+ *  27: Target Abort after internal 256 consecutive Master Retrys
+ *  28: PCI Bus wrote data to LCS_MBOX0
+ *  29: PCI Bus wrote data to LCS_MBOX1
+ *  30: PCI Bus wrote data to LCS_MBOX2
+ *  31: PCI Bus wrote data to LCS_MBOX3
+ */
+#define PLX_PEX8311_PCI_LCS_INTCSR  0x68
+#define INTCSR_INTERNAL_PCI_WIRE    BIT(8)
+#define INTCSR_LOCAL_INPUT          BIT(11)
+
 /**
  * struct idio_24_gpio_reg - GPIO device registers structure
  * @out0_7:	Read: FET Outputs 0-7
@@ -92,6 +133,7 @@ struct idio_24_gpio_reg {
 struct idio_24_gpio {
 	struct gpio_chip chip;
 	raw_spinlock_t lock;
+	__u8 __iomem *plx;
 	struct idio_24_gpio_reg __iomem *reg;
 	unsigned long irq_mask;
 };
@@ -334,13 +376,13 @@ static void idio_24_irq_mask(struct irq_data *data)
 	unsigned long flags;
 	const unsigned long bit_offset = irqd_to_hwirq(data) - 24;
 	unsigned char new_irq_mask;
-	const unsigned long bank_offset = bit_offset/8 * 8;
+	const unsigned long bank_offset = bit_offset / 8;
 	unsigned char cos_enable_state;
 
 	raw_spin_lock_irqsave(&idio24gpio->lock, flags);
 
-	idio24gpio->irq_mask &= BIT(bit_offset);
-	new_irq_mask = idio24gpio->irq_mask >> bank_offset;
+	idio24gpio->irq_mask &= ~BIT(bit_offset);
+	new_irq_mask = idio24gpio->irq_mask >> bank_offset * 8;
 
 	if (!new_irq_mask) {
 		cos_enable_state = ioread8(&idio24gpio->reg->cos_enable);
@@ -363,12 +405,12 @@ static void idio_24_irq_unmask(struct irq_data *data)
 	unsigned long flags;
 	unsigned char prev_irq_mask;
 	const unsigned long bit_offset = irqd_to_hwirq(data) - 24;
-	const unsigned long bank_offset = bit_offset/8 * 8;
+	const unsigned long bank_offset = bit_offset / 8;
 	unsigned char cos_enable_state;
 
 	raw_spin_lock_irqsave(&idio24gpio->lock, flags);
 
-	prev_irq_mask = idio24gpio->irq_mask >> bank_offset;
+	prev_irq_mask = idio24gpio->irq_mask >> bank_offset * 8;
 	idio24gpio->irq_mask |= BIT(bit_offset);
 
 	if (!prev_irq_mask) {
@@ -455,6 +497,7 @@ static int idio_24_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	struct device *const dev = &pdev->dev;
 	struct idio_24_gpio *idio24gpio;
 	int err;
+	const size_t pci_plx_bar_index = 1;
 	const size_t pci_bar_index = 2;
 	const char *const name = pci_name(pdev);
 	struct gpio_irq_chip *girq;
@@ -469,12 +512,13 @@ static int idio_24_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 		return err;
 	}
 
-	err = pcim_iomap_regions(pdev, BIT(pci_bar_index), name);
+	err = pcim_iomap_regions(pdev, BIT(pci_plx_bar_index) | BIT(pci_bar_index), name);
 	if (err) {
 		dev_err(dev, "Unable to map PCI I/O addresses (%d)\n", err);
 		return err;
 	}
 
+	idio24gpio->plx = pcim_iomap_table(pdev)[pci_plx_bar_index];
 	idio24gpio->reg = pcim_iomap_table(pdev)[pci_bar_index];
 
 	idio24gpio->chip.label = name;
@@ -504,6 +548,12 @@ static int idio_24_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 
 	/* Software board reset */
 	iowrite8(0, &idio24gpio->reg->soft_reset);
+	/*
+	 * enable PLX PEX8311 internal PCI wire interrupt and local interrupt
+	 * input
+	 */
+	iowrite8((INTCSR_INTERNAL_PCI_WIRE | INTCSR_LOCAL_INPUT) >> 8,
+		 idio24gpio->plx + PLX_PEX8311_PCI_LCS_INTCSR + 1);
 
 	err = devm_gpiochip_add_data(dev, &idio24gpio->chip, idio24gpio);
 	if (err) {

drivers/gpio/gpio-sifive.c

@@ -183,7 +183,7 @@ static int sifive_gpio_probe(struct platform_device *pdev)
 		return PTR_ERR(chip->regs);
 
 	ngpio = of_irq_count(node);
-	if (ngpio >= SIFIVE_GPIO_MAX) {
+	if (ngpio > SIFIVE_GPIO_MAX) {
 		dev_err(dev, "Too many GPIO interrupts (max=%d)\n",
 			SIFIVE_GPIO_MAX);
 		return -ENXIO;

drivers/gpio/gpiolib-cdev.h

@@ -7,22 +7,7 @@
 
 struct gpio_device;
 
-#ifdef CONFIG_GPIO_CDEV
-
 int gpiolib_cdev_register(struct gpio_device *gdev, dev_t devt);
 void gpiolib_cdev_unregister(struct gpio_device *gdev);
 
-#else
-
-static inline int gpiolib_cdev_register(struct gpio_device *gdev, dev_t devt)
-{
-	return 0;
-}
-
-static inline void gpiolib_cdev_unregister(struct gpio_device *gdev)
-{
-}
-
-#endif /* CONFIG_GPIO_CDEV */
-
 #endif /* GPIOLIB_CDEV_H */

drivers/gpio/gpiolib.c

@@ -480,11 +480,23 @@ static void gpiodevice_release(struct device *dev)
 	kfree(gdev);
 }
 
+#ifdef CONFIG_GPIO_CDEV
+#define gcdev_register(gdev, devt)	gpiolib_cdev_register((gdev), (devt))
+#define gcdev_unregister(gdev)		gpiolib_cdev_unregister((gdev))
+#else
+/*
+ * gpiolib_cdev_register() indirectly calls device_add(), which is still
+ * required even when cdev is not selected.
+ */
+#define gcdev_register(gdev, devt)	device_add(&(gdev)->dev)
+#define gcdev_unregister(gdev)		device_del(&(gdev)->dev)
+#endif
+
 static int gpiochip_setup_dev(struct gpio_device *gdev)
 {
 	int ret;
 
-	ret = gpiolib_cdev_register(gdev, gpio_devt);
+	ret = gcdev_register(gdev, gpio_devt);
 	if (ret)
 		return ret;
 
@@ -500,7 +512,7 @@ static int gpiochip_setup_dev(struct gpio_device *gdev)
 	return 0;
 
 err_remove_device:
-	gpiolib_cdev_unregister(gdev);
+	gcdev_unregister(gdev);
 	return ret;
 }
 
@@ -825,7 +837,7 @@ void gpiochip_remove(struct gpio_chip *gc)
 	 * be removed, else it will be dangling until the last user is
 	 * gone.
 	 */
-	gpiolib_cdev_unregister(gdev);
+	gcdev_unregister(gdev);
 	put_device(&gdev->dev);
 }
 EXPORT_SYMBOL_GPL(gpiochip_remove);