Merge tag 'drm-intel-fixes-2023-03-15' of...

Merge tag 'drm-intel-fixes-2023-03-15' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

drm/i915 fixes for v6.3-rc3:
- Fix hwmon PL1 power limit enabling
- Fix audio ELD handling for DP MST
- Fix PSR io and wake line calculations
- Fix DG2 HDMI modes with 267.30 and 319.89 MHz pixel clocks
- Fix SSEU subslice out-of-bounds access
- Fix misuse of non-idle barriers as fence trackers
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87r0tq5nyn.fsf@intel.com

drivers/gpu/drm/i915/display/intel_display_types.h

@@ -1631,6 +1631,8 @@ struct intel_psr {
 	bool psr2_sel_fetch_cff_enabled;
 	bool req_psr2_sdp_prior_scanline;
 	u8 sink_sync_latency;
+	u8 io_wake_lines;
+	u8 fast_wake_lines;
 	ktime_t last_entry_attempt;
 	ktime_t last_exit;
 	bool sink_not_reliable;

drivers/gpu/drm/i915/display/intel_dp_mst.c

@@ -265,6 +265,19 @@ static int intel_dp_mst_update_slots(struct intel_encoder *encoder,
 	return 0;
 }
 
+static bool intel_dp_mst_has_audio(const struct drm_connector_state *conn_state)
+{
+	const struct intel_digital_connector_state *intel_conn_state =
+		to_intel_digital_connector_state(conn_state);
+	struct intel_connector *connector =
+		to_intel_connector(conn_state->connector);
+
+	if (intel_conn_state->force_audio == HDMI_AUDIO_AUTO)
+		return connector->port->has_audio;
+	else
+		return intel_conn_state->force_audio == HDMI_AUDIO_ON;
+}
+
 static int intel_dp_mst_compute_config(struct intel_encoder *encoder,
 				       struct intel_crtc_state *pipe_config,
 				       struct drm_connector_state *conn_state)
@@ -272,10 +285,6 @@ static int intel_dp_mst_compute_config(struct intel_encoder *encoder,
 	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
 	struct intel_dp_mst_encoder *intel_mst = enc_to_mst(encoder);
 	struct intel_dp *intel_dp = &intel_mst->primary->dp;
-	struct intel_connector *connector =
-		to_intel_connector(conn_state->connector);
-	struct intel_digital_connector_state *intel_conn_state =
-		to_intel_digital_connector_state(conn_state);
 	const struct drm_display_mode *adjusted_mode =
 		&pipe_config->hw.adjusted_mode;
 	struct link_config_limits limits;
@@ -287,11 +296,9 @@ static int intel_dp_mst_compute_config(struct intel_encoder *encoder,
 	pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB;
 	pipe_config->has_pch_encoder = false;
 
-	if (intel_conn_state->force_audio == HDMI_AUDIO_AUTO)
-		pipe_config->has_audio = connector->port->has_audio;
-	else
 	pipe_config->has_audio =
-			intel_conn_state->force_audio == HDMI_AUDIO_ON;
+		intel_dp_mst_has_audio(conn_state) &&
+		intel_audio_compute_config(encoder, pipe_config, conn_state);
 
 	/*
 	 * for MST we always configure max link bw - the spec doesn't

drivers/gpu/drm/i915/display/intel_psr.c

@@ -542,6 +542,14 @@ static void hsw_activate_psr2(struct intel_dp *intel_dp)
 	val |= EDP_PSR2_FRAME_BEFORE_SU(max_t(u8, intel_dp->psr.sink_sync_latency + 1, 2));
 	val |= intel_psr2_get_tp_time(intel_dp);
 
+	if (DISPLAY_VER(dev_priv) >= 12) {
+		if (intel_dp->psr.io_wake_lines < 9 &&
+		    intel_dp->psr.fast_wake_lines < 9)
+			val |= TGL_EDP_PSR2_BLOCK_COUNT_NUM_2;
+		else
+			val |= TGL_EDP_PSR2_BLOCK_COUNT_NUM_3;
+	}
+
 	/* Wa_22012278275:adl-p */
 	if (IS_ADLP_DISPLAY_STEP(dev_priv, STEP_A0, STEP_E0)) {
 		static const u8 map[] = {
@@ -558,31 +566,21 @@ static void hsw_activate_psr2(struct intel_dp *intel_dp)
 		 * Still using the default IO_BUFFER_WAKE and FAST_WAKE, see
 		 * comments bellow for more information
 		 */
-		u32 tmp, lines = 7;
-
-		val |= TGL_EDP_PSR2_BLOCK_COUNT_NUM_2;
+		u32 tmp;
 
-		tmp = map[lines - TGL_EDP_PSR2_IO_BUFFER_WAKE_MIN_LINES];
+		tmp = map[intel_dp->psr.io_wake_lines - TGL_EDP_PSR2_IO_BUFFER_WAKE_MIN_LINES];
 		tmp = tmp << TGL_EDP_PSR2_IO_BUFFER_WAKE_SHIFT;
 		val |= tmp;
 
-		tmp = map[lines - TGL_EDP_PSR2_FAST_WAKE_MIN_LINES];
+		tmp = map[intel_dp->psr.fast_wake_lines - TGL_EDP_PSR2_FAST_WAKE_MIN_LINES];
 		tmp = tmp << TGL_EDP_PSR2_FAST_WAKE_MIN_SHIFT;
 		val |= tmp;
 	} else if (DISPLAY_VER(dev_priv) >= 12) {
-		/*
-		 * TODO: 7 lines of IO_BUFFER_WAKE and FAST_WAKE are default
-		 * values from BSpec. In order to setting an optimal power
-		 * consumption, lower than 4k resolution mode needs to decrease
-		 * IO_BUFFER_WAKE and FAST_WAKE. And higher than 4K resolution
-		 * mode needs to increase IO_BUFFER_WAKE and FAST_WAKE.
-		 */
-		val |= TGL_EDP_PSR2_BLOCK_COUNT_NUM_2;
-		val |= TGL_EDP_PSR2_IO_BUFFER_WAKE(7);
-		val |= TGL_EDP_PSR2_FAST_WAKE(7);
+		val |= TGL_EDP_PSR2_IO_BUFFER_WAKE(intel_dp->psr.io_wake_lines);
+		val |= TGL_EDP_PSR2_FAST_WAKE(intel_dp->psr.fast_wake_lines);
 	} else if (DISPLAY_VER(dev_priv) >= 9) {
-		val |= EDP_PSR2_IO_BUFFER_WAKE(7);
-		val |= EDP_PSR2_FAST_WAKE(7);
+		val |= EDP_PSR2_IO_BUFFER_WAKE(intel_dp->psr.io_wake_lines);
+		val |= EDP_PSR2_FAST_WAKE(intel_dp->psr.fast_wake_lines);
 	}
 
 	if (intel_dp->psr.req_psr2_sdp_prior_scanline)
@@ -842,6 +840,46 @@ static bool _compute_psr2_sdp_prior_scanline_indication(struct intel_dp *intel_d
 	return true;
 }
 
+static bool _compute_psr2_wake_times(struct intel_dp *intel_dp,
+				     struct intel_crtc_state *crtc_state)
+{
+	struct drm_i915_private *i915 = dp_to_i915(intel_dp);
+	int io_wake_lines, io_wake_time, fast_wake_lines, fast_wake_time;
+	u8 max_wake_lines;
+
+	if (DISPLAY_VER(i915) >= 12) {
+		io_wake_time = 42;
+		/*
+		 * According to Bspec it's 42us, but based on testing
+		 * it is not enough -> use 45 us.
+		 */
+		fast_wake_time = 45;
+		max_wake_lines = 12;
+	} else {
+		io_wake_time = 50;
+		fast_wake_time = 32;
+		max_wake_lines = 8;
+	}
+
+	io_wake_lines = intel_usecs_to_scanlines(
+		&crtc_state->uapi.adjusted_mode, io_wake_time);
+	fast_wake_lines = intel_usecs_to_scanlines(
+		&crtc_state->uapi.adjusted_mode, fast_wake_time);
+
+	if (io_wake_lines > max_wake_lines ||
+	    fast_wake_lines > max_wake_lines)
+		return false;
+
+	if (i915->params.psr_safest_params)
+		io_wake_lines = fast_wake_lines = max_wake_lines;
+
+	/* According to Bspec lower limit should be set as 7 lines. */
+	intel_dp->psr.io_wake_lines = max(io_wake_lines, 7);
+	intel_dp->psr.fast_wake_lines = max(fast_wake_lines, 7);
+
+	return true;
+}
+
 static bool intel_psr2_config_valid(struct intel_dp *intel_dp,
 				    struct intel_crtc_state *crtc_state)
 {
@@ -936,6 +974,12 @@ static bool intel_psr2_config_valid(struct intel_dp *intel_dp,
 		return false;
 	}
 
+	if (!_compute_psr2_wake_times(intel_dp, crtc_state)) {
+		drm_dbg_kms(&dev_priv->drm,
+			    "PSR2 not enabled, Unable to use long enough wake times\n");
+		return false;
+	}
+
 	if (HAS_PSR2_SEL_FETCH(dev_priv)) {
 		if (!intel_psr2_sel_fetch_config_valid(intel_dp, crtc_state) &&
 		    !HAS_PSR_HW_TRACKING(dev_priv)) {

drivers/gpu/drm/i915/display/intel_snps_phy.c

@@ -1419,6 +1419,36 @@ static const struct intel_mpllb_state dg2_hdmi_262750 = {
 		REG_FIELD_PREP(SNPS_PHY_MPLLB_SSC_UP_SPREAD, 1),
 };
 
+static const struct intel_mpllb_state dg2_hdmi_267300 = {
+	.clock = 267300,
+	.ref_control =
+		REG_FIELD_PREP(SNPS_PHY_REF_CONTROL_REF_RANGE, 3),
+	.mpllb_cp =
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_CP_INT, 7) |
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_CP_PROP, 14) |
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_CP_INT_GS, 64) |
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_CP_PROP_GS, 124),
+	.mpllb_div =
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_DIV5_CLK_EN, 1) |
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_TX_CLK_DIV, 1) |
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_PMIX_EN, 1) |
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_V2I, 2) |
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_FREQ_VCO, 3),
+	.mpllb_div2 =
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_REF_CLK_DIV, 1) |
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_MULTIPLIER, 74) |
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_HDMI_DIV, 1),
+	.mpllb_fracn1 =
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_FRACN_CGG_UPDATE_EN, 1) |
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_FRACN_EN, 1) |
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_FRACN_DEN, 65535),
+	.mpllb_fracn2 =
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_FRACN_QUOT, 30146) |
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_FRACN_REM, 36699),
+	.mpllb_sscen =
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_SSC_UP_SPREAD, 1),
+};
+
 static const struct intel_mpllb_state dg2_hdmi_268500 = {
 	.clock = 268500,
 	.ref_control =
@@ -1509,6 +1539,36 @@ static const struct intel_mpllb_state dg2_hdmi_241500 = {
 		REG_FIELD_PREP(SNPS_PHY_MPLLB_SSC_UP_SPREAD, 1),
 };
 
+static const struct intel_mpllb_state dg2_hdmi_319890 = {
+	.clock = 319890,
+	.ref_control =
+		REG_FIELD_PREP(SNPS_PHY_REF_CONTROL_REF_RANGE, 3),
+	.mpllb_cp =
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_CP_INT, 6) |
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_CP_PROP, 14) |
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_CP_INT_GS, 64) |
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_CP_PROP_GS, 124),
+	.mpllb_div =
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_DIV5_CLK_EN, 1) |
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_TX_CLK_DIV, 1) |
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_PMIX_EN, 1) |
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_V2I, 2) |
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_FREQ_VCO, 2),
+	.mpllb_div2 =
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_REF_CLK_DIV, 1) |
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_MULTIPLIER, 94) |
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_HDMI_DIV, 1),
+	.mpllb_fracn1 =
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_FRACN_CGG_UPDATE_EN, 1) |
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_FRACN_EN, 1) |
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_FRACN_DEN, 65535),
+	.mpllb_fracn2 =
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_FRACN_QUOT, 64094) |
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_FRACN_REM, 13631),
+	.mpllb_sscen =
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_SSC_UP_SPREAD, 1),
+};
+
 static const struct intel_mpllb_state dg2_hdmi_497750 = {
 	.clock = 497750,
 	.ref_control =
@@ -1696,8 +1756,10 @@ static const struct intel_mpllb_state * const dg2_hdmi_tables[] = {
 	&dg2_hdmi_209800,
 	&dg2_hdmi_241500,
 	&dg2_hdmi_262750,
+	&dg2_hdmi_267300,
 	&dg2_hdmi_268500,
 	&dg2_hdmi_296703,
+	&dg2_hdmi_319890,
 	&dg2_hdmi_497750,
 	&dg2_hdmi_592000,
 	&dg2_hdmi_593407,

drivers/gpu/drm/i915/gt/intel_sseu.h

@@ -27,7 +27,7 @@ struct drm_printer;
  * is only relevant to pre-Xe_HP platforms (Xe_HP and beyond use the
  * I915_MAX_SS_FUSE_BITS value below).
  */
-#define GEN_MAX_SS_PER_HSW_SLICE	6
+#define GEN_MAX_SS_PER_HSW_SLICE	8
 
 /*
  * Maximum number of 32-bit registers used by hardware to express the

drivers/gpu/drm/i915/i915_active.c

@@ -422,12 +422,12 @@ replace_barrier(struct i915_active *ref, struct i915_active_fence *active)
 	 * we can use it to substitute for the pending idle-barrer
 	 * request that we want to emit on the kernel_context.
 	 */
-	__active_del_barrier(ref, node_from_active(active));
-	return true;
+	return __active_del_barrier(ref, node_from_active(active));
 }
 
 int i915_active_add_request(struct i915_active *ref, struct i915_request *rq)
 {
+	u64 idx = i915_request_timeline(rq)->fence_context;
 	struct dma_fence *fence = &rq->fence;
 	struct i915_active_fence *active;
 	int err;
@@ -437,7 +437,8 @@ int i915_active_add_request(struct i915_active *ref, struct i915_request *rq)
 	if (err)
 		return err;
 
-	active = active_instance(ref, i915_request_timeline(rq)->fence_context);
+	do {
+		active = active_instance(ref, idx);
 		if (!active) {
 			err = -ENOMEM;
 			goto out;
@@ -447,6 +448,8 @@ int i915_active_add_request(struct i915_active *ref, struct i915_request *rq)
 			RCU_INIT_POINTER(active->fence, NULL);
 			atomic_dec(&ref->count);
 		}
+	} while (unlikely(is_barrier(active)));
+
 	if (!__i915_active_fence_set(active, fence))
 		__i915_active_acquire(ref);
 

drivers/gpu/drm/i915/i915_hwmon.c

@@ -687,6 +687,11 @@ hwm_get_preregistration_info(struct drm_i915_private *i915)
 		for_each_gt(gt, i915, i)
 			hwm_energy(&hwmon->ddat_gt[i], &energy);
 	}
+
+	/* Enable PL1 power limit */
+	if (i915_mmio_reg_valid(hwmon->rg.pkg_rapl_limit))
+		hwm_locked_with_pm_intel_uncore_rmw(ddat, hwmon->rg.pkg_rapl_limit,
+						    PKG_PWR_LIM_1_EN, PKG_PWR_LIM_1_EN);
 }
 
 void i915_hwmon_register(struct drm_i915_private *i915)