Skip to content

L
linux
Commit 2add87a9 authored by Johannes Stezenbach's avatar Johannes Stezenbach Committed by Linus Torvalds
Browse files
Options

[PATCH] dvb: b2c2/flexcop driver refactoring part 2: add modular Flexcop driver 

b2c2/flexcop driver refactoring to support PCI and USB based cards part 2: add
modular Flexcop driver
Signed-off-by: default avatarPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: default avatarJohannes Stezenbach <js@linuxtv.org>
Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
parent 1ec35972
Show whitespace changes
Inline Side-by-side
Showing with 4098 additions and 1 deletion
Documentation/dvb/README.flexcop 0 → 100644
View file @ 2add87a9
This README escorted the skystar2-driver rewriting procedure. It describes the
state of the new flexcop-driver set and some internals are written down here
too.
How to do something in here?
============================
make -f Makefile.t
make -C ../build-2.6
./in.sh # load the drivers
./rm.sh # unload the drivers
Please read this file, if you want to contribute.
This document hopefully describes things about the flexcop and its
device-offsprings. Goal is to write a easy-to-write and easy-to-read set of
drivers based on the skystar2.c and other information.
This directory is temporary. It is used for rewriting the skystar2.c and to
create shared code, which then can be used by the usb box as well.
Remark: flexcop-pci.c was a copy of skystar2.c, but every line has been
touched and rewritten.
General coding processing
=========================
We should proceed as follows (as long as no one complains):
0) Think before start writing code!
1) rewriting the skystar2.c with the help of the flexcop register descriptions
and splitting up the files to a pci-bus-part and a flexcop-part.
The new driver will be called b2c2-flexcop-pci.ko/b2c2-flexcop-usb.ko for the
device-specific part and b2c2-flexcop.ko for the common flexcop-functions.
2) Search for errors in the leftover of flexcop-pci.c (compare with pluto2.c
and other pci drivers)
3) make some beautification (see 'Improvements when rewriting (refactoring) is
done')
4) Testing the new driver and maybe substitute the skystar2.c with it, to reach
a wider tester audience.
5) creating an usb-bus-part using the already written flexcop code for the pci
card.
Idea: create a kernel-object for the flexcop and export all important
functions. This option saves kernel-memory, but maybe a lot of functions have
to be exported to kernel namespace.
Current situation
=================
0) Done :)
1) Done (some minor issues left)
2) Done
3) Not ready yet, more information is necessary
4) next to be done (see the table below)
5) USB driver is working (yes, there are some minor issues)
What seems to be ready?
-----------------------
1) Rewriting
1a) i2c is cut off from the flexcop-pci.c and seems to work
1b) moved tuner and demod stuff from flexcop-pci.c to flexcop-tuner-fe.c
1c) moved lnb and diseqc stuff from flexcop-pci.c to flexcop-tuner-fe.c
1e) eeprom (reading MAC address)
1d) sram (no dynamic sll size detection (commented out) (using default as JJ told me))
1f) misc. register accesses for reading parameters (e.g. resetting, revision)
1g) pid/mac filter (flexcop-hw-filter.c)
1i) dvb-stuff initialization in flexcop.c (done)
1h) dma stuff (now just using the size-irq, instead of all-together, to be done)
1j) remove flexcop initialization from flexcop-pci.c completely (done)
1l) use a well working dma IRQ method (done, see 'Known bugs and problems and TODO')
1k) cleanup flexcop-files (remove unused EXPORT_SYMBOLs, make static from
non-static where possible, moved code to proper places)
2) Search for errors in the leftover of flexcop-pci.c (partially done)
5a) add MAC address reading
What to do in the near future?
--------------------------------------
(no special order here)
5) USB driver
5b) optimize isoc-transfer (submitting/killing isoc URBs when transfer is starting)
5c) feeding of ISOC data to the software demux (format of the isochronous data
and speed optimization, no real error)
Testing changes
---------------
O = item is working
P = item is partially working
X = item is not working
N = item does not apply here
<empty field> = item need to be examined
| PCI | USB
item | mt352 | nxt2002 | stv0299 | mt312 | mt352 | nxt2002 | stv0299 | mt312
-------+-------+---------+---------+-------+-------+---------+---------+-------
1a) | O | | | | N | N | N | N
1b) | O | | | | | | O |
1c) | N | N | | | N | N | O |
1d) | O | O
1e) | O | O
1f) | P
1g) | O
1h) | P |
1i) | O | N
1j) | O | N
1l) | O | N
2) | O | N
5a) | N | O
5b)* | N |
5c)* | N |
* - not done yet
Known bugs and problems and TODO
--------------------------------
1g/h/l) when pid filtering is enabled on the pci card
DMA usage currently:
The DMA is splitted in 2 equal-sized subbuffers. The Flexcop writes to first
address and triggers an IRQ when it's full and starts writing to the second
address. When the second address is full, the IRQ is triggered again, and
the flexcop writes to first address again, and so on.
The buffersize of each address is currently 640*188 bytes.
Problem is, when using hw-pid-filtering and doing some low-bandwidth
operation (like scanning) the buffers won't be filled enough to trigger
the IRQ. That's why:
When PID filtering is activated, the timer IRQ is used. Every 1.97 ms the IRQ
is triggered. Is the current write address of DMA1 different to the one
during the last IRQ, then the data is passed to the demuxer.
There is an additional DMA-IRQ-method: packet count IRQ. This isn't
implemented correctly yet.
The solution is to disable HW PID filtering, but I don't know how the DVB
API software demux behaves on slow systems with 45MBit/s TS.
Solved bugs :)
--------------
1g) pid-filtering (somehow pid index 4 and 5 (EMM_PID and ECM_PID) aren't
working)
SOLUTION: also index 0 was affected, because net_translation is done for
these indexes by default
5b) isochronous transfer does only work in the first attempt (for the Sky2PC USB,
Air2PC is working)
SOLUTION: the flexcop was going asleep and never really woke up again (don't
know if this need fixes, see flexcop-fe-tuner.c:flexcop_sleep)
Improvements when rewriting (refactoring) is done
=================================================
- split sleeping of the flexcop (misc_204.ACPI3_sig = 1;) from lnb_control
(enable sleeping for other demods than dvb-s)
- add support for CableStar (stv0297 Microtune 203x/ALPS)
Debugging
---------
- add verbose debugging to skystar2.c (dump the reg_dw_data) and compare it
with this flexcop, this is important, because i2c is now using the
flexcop_ibi_value union from flexcop-reg.h (do you have a better idea for
that, please tell us so).
Everything which is identical in the following table, can be put into a common
flexcop-module.
PCI USB
-------------------------------------------------------------------------------
Different:
Register access: accessing IO memory USB control message
I2C bus: I2C bus of the FC USB control message
Data transfer: DMA isochronous transfer
EEPROM transfer: through i2c bus not clear yet
Identical:
Streaming: accessing registers
PID Filtering: accessing registers
Sram destinations: accessing registers
Tuner/Demod: I2C bus
DVB-stuff: can be written for common use
Restrictions:
============
We need to create a bus-specific-struct and a flexcop-struct.
bus-specific-struct:
struct flexcop_pci
...
struct flexcop_usb
...
struct flexcop_device {
void *bus_specific; /* container for bus-specific struct */
...
}
PCI i2c can read/write max 4 bytes at a time, USB can more
Functions
=========
Syntax
------
- Flexcop functions will be called "flexcop(_[a-z0-9]+)+" and exported as such
if needed.
- Flexcop-device functions will be called "flexcop_device(_[a-z0-9]+)+" and
exported as such if needed.
- Both will be compiled to b2c2-flexcop.ko and their source can be found in the
flexcop*.[hc]
Callbacks and exports
---------------------
Bus-specific functions will be given as callbacks (function pointers) to the
flexcop-module. (within the flexcop_device-struct)
Initialization process
======================
b2c2-flexcop.ko is loaded
b2c2-flexcop-<bus>.ko is loaded
suppose a device is found:
malloc flexcop and the bus-specific variables (via flexcop_device_malloc)
fill the bus-specific variable
fill the flexcop variable (especially the bus-specific callbacks)
bus-specific initialization
- ...
do the common initialization (via flexcop_device_initialize)
- reset the card
- determine flexcop type (II, IIB, III)
- hw_filters (bus dependent)
- 0x204
- set sram size
- create the dvb-stuff
- create i2c stuff
- frontend-initialization
done
bus specific:
- media_destination (this and the following 3 are bus specific)
- cai_dest
- cao_dest
- net_destination
Bugs fixed while rewriting the driver
=====================================
- EEPROM access (to read the MAC address) was fixed to death some time last
year. (fixed here and in skystar2.c) (Bjarne, this was the piece of code
(fix-chipaddr) we were wondering about)
Acknowledgements (just for the rewriting part)
================
Bjarne Steinsbo thought a lot in the first place of the pci part for this code
sharing idea.
Andreas Oberritter for providing a recent PCI initialization template (pluto2.c).
comments, critics and ideas to linux-dvb@linuxtv.org or patrick.boettcher@desy.de
drivers/media/dvb/Kconfig
View file @ 2add87a9
...@@ -33,7 +33,7 @@ source "drivers/media/dvb/dibusb/Kconfig" ...@@ -33,7 +33,7 @@ source "drivers/media/dvb/dibusb/Kconfig"
source "drivers/media/dvb/cinergyT2/Kconfig" source "drivers/media/dvb/cinergyT2/Kconfig"
comment "Supported FlexCopII (B2C2) Adapters" comment "Supported FlexCopII (B2C2) Adapters"
depends on DVB_CORE && PCI depends on DVB_CORE && (PCI || USB)
source "drivers/media/dvb/b2c2/Kconfig" source "drivers/media/dvb/b2c2/Kconfig"
comment "Supported BT878 Adapters" comment "Supported BT878 Adapters"
......
drivers/media/dvb/b2c2/Kconfig
View file @ 2add87a9
config DVB_B2C2_FLEXCOP
tristate "Technisat/B2C2 FlexCopII(b) and FlexCopIII adapters"
depends on DVB_CORE
select DVB_STV0299
select DVB_MT352
select DVB_MT312
select DVB_NXT2002
select DVB_STV0297
help
Support for the digital TV receiver chip made by B2C2 Inc. included in
Technisats PCI cards and USB boxes.
Say Y if you own such a device and want to use it.
config DVB_B2C2_FLEXCOP_PCI
tristate "Technisat/B2C2 Air/Sky/Cable2PC PCI"
depends on DVB_B2C2_FLEXCOP && PCI
help
Support for the Air/Sky/CableStar2 PCI card (DVB/ATSC) by Technisat/B2C2.
Say Y if you own such a device and want to use it.
config DVB_B2C2_FLEXCOP_USB
tristate "Technisat/B2C2 Air/Sky/Cable2PC USB"
depends on DVB_B2C2_FLEXCOP && USB
help
Support for the Air/Sky/Cable2PC USB1.1 box (DVB/ATSC) by Technisat/B2C2,
Say Y if you own such a device and want to use it.
config DVB_B2C2_FLEXCOP_DEBUG
bool "Enable debug for the B2C2 FlexCop drivers"
depends on DVB_B2C2_FLEXCOP
help
Say Y if you want to enable the module option to control debug messages
of all B2C2 FlexCop drivers.
config DVB_B2C2_SKYSTAR config DVB_B2C2_SKYSTAR
tristate "B2C2/Technisat Air/Sky/CableStar 2 PCI" tristate "B2C2/Technisat Air/Sky/CableStar 2 PCI"
depends on DVB_CORE && PCI depends on DVB_CORE && PCI
......
drivers/media/dvb/b2c2/Makefile
View file @ 2add87a9
b2c2-flexcop-objs = flexcop.o flexcop-fe-tuner.o flexcop-i2c.o \
flexcop-sram.o flexcop-eeprom.o flexcop-misc.o flexcop-hw-filter.o \
flexcop-dma.o
obj-$(CONFIG_DVB_B2C2_FLEXCOP) += b2c2-flexcop.o
b2c2-flexcop-pci-objs = flexcop-pci.o
obj-$(CONFIG_DVB_B2C2_FLEXCOP_PCI) += b2c2-flexcop-pci.o
b2c2-flexcop-usb-objs = flexcop-usb.o
obj-$(CONFIG_DVB_B2C2_FLEXCOP_USB) += b2c2-flexcop-usb.o
obj-$(CONFIG_DVB_B2C2_SKYSTAR) += skystar2.o obj-$(CONFIG_DVB_B2C2_SKYSTAR) += skystar2.o
EXTRA_CFLAGS = -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/ EXTRA_CFLAGS = -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/
drivers/media/dvb/b2c2/flexcop-common.h 0 → 100644
View file @ 2add87a9
/*
* This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III
*
* flexcop-common.h - common header file for device-specific source files also.
*
* see flexcop.c for copyright information.
*/
#ifndef __FLEXCOP_COMMON_H__
#define __FLEXCOP_COMMON_H__
#include <linux/config.h>
#include <linux/pci.h>
#include "flexcop-reg.h"
#include "dmxdev.h"
#include "dvb_demux.h"
#include "dvb_filter.h"
#include "dvb_net.h"
#include "dvb_frontend.h"
#define FC_MAX_FEED 256
#ifndef FC_LOG_PREFIX
#warning please define a log prefix for your file, using a default one
#define FC_LOG_PREFIX "b2c2-undef"
#endif
/* Steal from usb.h */
#undef err
#define err(format, arg...) printk(KERN_ERR FC_LOG_PREFIX ": " format "\n" , ## arg)
#undef info
#define info(format, arg...) printk(KERN_INFO FC_LOG_PREFIX ": " format "\n" , ## arg)
#undef warn
#define warn(format, arg...) printk(KERN_WARNING FC_LOG_PREFIX ": " format "\n" , ## arg)
struct flexcop_dma {
struct pci_dev *pdev;
u8 *cpu_addr0;
dma_addr_t dma_addr0;
u8 *cpu_addr1;
dma_addr_t dma_addr1;
u32 size; /* size of each address in bytes */
};
/* Control structure for data definitions that are common to
* the B2C2-based PCI and USB devices.
*/
struct flexcop_device {
/* general */
struct device *dev; /* for firmware_class */
#define FC_STATE_DVB_INIT 0x01
#define FC_STATE_I2C_INIT 0x02
#define FC_STATE_FE_INIT 0x04
int init_state;
/* device information */
u8 mac_address[6];
int has_32_hw_pid_filter;
flexcop_revision_t rev;
flexcop_device_type_t dev_type;
flexcop_bus_t bus_type;
/* dvb stuff */
struct dvb_adapter dvb_adapter;
struct dvb_frontend *fe;
struct dvb_net dvbnet;
struct dvb_demux demux;
struct dmxdev dmxdev;
struct dmx_frontend hw_frontend;
struct dmx_frontend mem_frontend;
int (*fe_sleep) (struct dvb_frontend *);
struct i2c_adapter i2c_adap;
struct semaphore i2c_sem;
/* options and status */
int feedcount;
int pid_filtering;
/* bus specific callbacks */
flexcop_ibi_value (*read_ibi_reg) (struct flexcop_device *, flexcop_ibi_register);
int (*write_ibi_reg) (struct flexcop_device *, flexcop_ibi_register, flexcop_ibi_value);
int (*i2c_request) (struct flexcop_device*, flexcop_access_op_t, flexcop_i2c_port_t, u8 chipaddr, u8 addr, u8 *buf, u16 len);
int (*stream_control) (struct flexcop_device*, int);
int (*get_mac_addr) (struct flexcop_device *fc, int extended);
void *bus_specific;
};
/* exported prototypes */
/* from flexcop.c */
void flexcop_pass_dmx_data(struct flexcop_device *fc, u8 *buf, u32 len);
void flexcop_pass_dmx_packets(struct flexcop_device *fc, u8 *buf, u32 no);
struct flexcop_device *flexcop_device_kmalloc(size_t bus_specific_len);
void flexcop_device_kfree(struct flexcop_device*);
int flexcop_device_initialize(struct flexcop_device*);
void flexcop_device_exit(struct flexcop_device *fc);
/* from flexcop-dma.c */
int flexcop_dma_allocate(struct pci_dev *pdev, struct flexcop_dma *dma, u32 size);
void flexcop_dma_free(struct flexcop_dma *dma);
int flexcop_dma_control_timer_irq(struct flexcop_device *fc, flexcop_dma_index_t no, int onoff);
int flexcop_dma_control_size_irq(struct flexcop_device *fc, flexcop_dma_index_t no, int onoff);
int flexcop_dma_control_packet_irq(struct flexcop_device *fc, flexcop_dma_index_t no, int onoff);
int flexcop_dma_config(struct flexcop_device *fc, struct flexcop_dma *dma, flexcop_dma_index_t dma_idx,flexcop_dma_addr_index_t index);
int flexcop_dma_config_timer(struct flexcop_device *fc, flexcop_dma_index_t dma_idx, u8 cycles);
int flexcop_dma_config_packet_count(struct flexcop_device *fc, flexcop_dma_index_t dma_idx, u8 packets);
/* from flexcop-eeprom.c */
/* the PCI part uses this call to get the MAC address, the USB part has its own */
int flexcop_eeprom_check_mac_addr(struct flexcop_device *fc, int extended);
/* from flexcop-i2c.c */
/* the PCI part uses this a i2c_request callback, whereas the usb part has its own
* one. We have it in flexcop-i2c.c, because it is going via the actual
* I2C-channel of the flexcop.
*/
int flexcop_i2c_request(struct flexcop_device*, flexcop_access_op_t,
flexcop_i2c_port_t, u8 chipaddr, u8 addr, u8 *buf, u16 len);
/* from flexcop-sram.c */
int flexcop_sram_set_dest(struct flexcop_device *fc, flexcop_sram_dest_t dest, flexcop_sram_dest_target_t target);
void flexcop_wan_set_speed(struct flexcop_device *fc, flexcop_wan_speed_t s);
void flexcop_sram_ctrl(struct flexcop_device *fc, int usb_wan, int sramdma, int maximumfill);
/* global prototypes for the flexcop-chip */
/* from flexcop-fe-tuner.c */
int flexcop_frontend_init(struct flexcop_device *card);
void flexcop_frontend_exit(struct flexcop_device *fc);
/* from flexcop-i2c.c */
int flexcop_i2c_init(struct flexcop_device *fc);
void flexcop_i2c_exit(struct flexcop_device *fc);
/* from flexcop-sram.c */
int flexcop_sram_init(struct flexcop_device *fc);
/* from flexcop-misc.c */
void flexcop_determine_revision(struct flexcop_device *fc);
void flexcop_device_name(struct flexcop_device *fc,const char *prefix,const char *suffix);
/* from flexcop-hw-filter.c */
int flexcop_pid_feed_control(struct flexcop_device *fc, struct dvb_demux_feed *dvbdmxfeed, int onoff);
void flexcop_hw_filter_init(struct flexcop_device *fc);
void flexcop_smc_ctrl(struct flexcop_device *fc, int onoff);
void flexcop_set_mac_filter(struct flexcop_device *fc, u8 mac[6]);
void flexcop_mac_filter_ctrl(struct flexcop_device *fc, int onoff);
#endif
drivers/media/dvb/b2c2/flexcop-dma.c 0 → 100644
View file @ 2add87a9
/*
* This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III
*
* flexcop-dma.c - methods for configuring and controlling the DMA of the FlexCop.
*
* see flexcop.c for copyright information.
*/
#include "flexcop.h"
int flexcop_dma_allocate(struct pci_dev *pdev, struct flexcop_dma *dma, u32 size)
{
u8 *tcpu;
dma_addr_t tdma;
if (size % 2) {
err("dma buffersize has to be even.");
return -EINVAL;
}
if ((tcpu = pci_alloc_consistent(pdev, size, &tdma)) != NULL) {
dma->pdev = pdev;
dma->cpu_addr0 = tcpu;
dma->dma_addr0 = tdma;
dma->cpu_addr1 = tcpu + size/2;
dma->dma_addr1 = tdma + size/2;
dma->size = size/2;
return 0;
}
return -ENOMEM;
}
EXPORT_SYMBOL(flexcop_dma_allocate);
void flexcop_dma_free(struct flexcop_dma *dma)
{
pci_free_consistent(dma->pdev, dma->size*2,dma->cpu_addr0, dma->dma_addr0);
memset(dma,0,sizeof(struct flexcop_dma));
}
EXPORT_SYMBOL(flexcop_dma_free);
int flexcop_dma_control_timer_irq(struct flexcop_device *fc, flexcop_dma_index_t no, int onoff)
{
flexcop_ibi_value v = fc->read_ibi_reg(fc,ctrl_208);
if (no & FC_DMA_1)
v.ctrl_208.DMA1_Timer_Enable_sig = onoff;
if (no & FC_DMA_2)
v.ctrl_208.DMA2_Timer_Enable_sig = onoff;
fc->write_ibi_reg(fc,ctrl_208,v);
return 0;
}
EXPORT_SYMBOL(flexcop_dma_control_timer_irq);
int flexcop_dma_control_size_irq(struct flexcop_device *fc, flexcop_dma_index_t no, int onoff)
{
flexcop_ibi_value v = fc->read_ibi_reg(fc,ctrl_208);
if (no & FC_DMA_1)
v.ctrl_208.DMA1_IRQ_Enable_sig = onoff;
if (no & FC_DMA_2)
v.ctrl_208.DMA2_IRQ_Enable_sig = onoff;
fc->write_ibi_reg(fc,ctrl_208,v);
return 0;
}
EXPORT_SYMBOL(flexcop_dma_control_size_irq);
int flexcop_dma_control_packet_irq(struct flexcop_device *fc, flexcop_dma_index_t no, int onoff)
{
flexcop_ibi_value v = fc->read_ibi_reg(fc,ctrl_208);
if (no & FC_DMA_1)
v.ctrl_208.DMA1_Size_IRQ_Enable_sig = onoff;
if (no & FC_DMA_2)
v.ctrl_208.DMA2_Size_IRQ_Enable_sig = onoff;
fc->write_ibi_reg(fc,ctrl_208,v);
return 0;
}
EXPORT_SYMBOL(flexcop_dma_control_packet_irq);
int flexcop_dma_config(struct flexcop_device *fc, struct flexcop_dma *dma, flexcop_dma_index_t dma_idx,flexcop_dma_addr_index_t index)
{
flexcop_ibi_value v0x0,v0x4,v0xc;
v0x0.raw = v0x4.raw = v0xc.raw = 0;
v0x0.dma_0x0.dma_address0 = dma->dma_addr0 >> 2;
v0xc.dma_0xc.dma_address1 = dma->dma_addr1 >> 2;
v0x4.dma_0x4_write.dma_addr_size = dma->size / 4;
if (index & FC_DMA_SUBADDR_0)
v0x0.dma_0x0.dma_0start = 1;
if (index & FC_DMA_SUBADDR_1)
v0xc.dma_0xc.dma_1start = 1;
if (dma_idx & FC_DMA_1) {
fc->write_ibi_reg(fc,dma1_000,v0x0);
fc->write_ibi_reg(fc,dma1_004,v0x4);
fc->write_ibi_reg(fc,dma1_00c,v0xc);
} else { /* (dma_idx & FC_DMA_2) */
fc->write_ibi_reg(fc,dma2_010,v0x0);
fc->write_ibi_reg(fc,dma2_014,v0x4);
fc->write_ibi_reg(fc,dma2_01c,v0xc);
}
return 0;
}
EXPORT_SYMBOL(flexcop_dma_config);
static int flexcop_dma_remap(struct flexcop_device *fc, flexcop_dma_index_t dma_idx, int onoff)
{
flexcop_ibi_register r = (dma_idx & FC_DMA_1) ? dma1_00c : dma2_01c;
flexcop_ibi_value v = fc->read_ibi_reg(fc,r);
v.dma_0xc.remap_enable = onoff;
fc->write_ibi_reg(fc,r,v);
return 0;
}
/* 1 cycles = 1.97 msec */
int flexcop_dma_config_timer(struct flexcop_device *fc, flexcop_dma_index_t dma_idx, u8 cycles)
{
flexcop_ibi_register r = (dma_idx & FC_DMA_1) ? dma1_004 : dma2_014;
flexcop_ibi_value v = fc->read_ibi_reg(fc,r);
flexcop_dma_remap(fc,dma_idx,0);
v.dma_0x4_write.dmatimer = cycles >> 1;
fc->write_ibi_reg(fc,r,v);
return 0;
}
EXPORT_SYMBOL(flexcop_dma_config_timer);
int flexcop_dma_config_packet_count(struct flexcop_device *fc, flexcop_dma_index_t dma_idx, u8 packets)
{
flexcop_ibi_register r = (dma_idx & FC_DMA_1) ? dma1_004 : dma2_014;
flexcop_ibi_value v = fc->read_ibi_reg(fc,r);
flexcop_dma_remap(fc,dma_idx,1);
v.dma_0x4_remap.DMA_maxpackets = packets;
fc->write_ibi_reg(fc,r,v);
return 0;
}
EXPORT_SYMBOL(flexcop_dma_config_packet_count);
drivers/media/dvb/b2c2/flexcop-eeprom.c 0 → 100644
View file @ 2add87a9
/*
* This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III
*
* flexcop-eeprom.c - eeprom access methods (currently only MAC address reading is used)
*
* see flexcop.c for copyright information.
*/
#include "flexcop.h"
#if 0
/*EEPROM (Skystar2 has one "24LC08B" chip on board) */
static int eeprom_write(struct adapter *adapter, u16 addr, u8 *buf, u16 len)
{
return flex_i2c_write(adapter, 0x20000000, 0x50, addr, buf, len);
}
static int eeprom_lrc_write(struct adapter *adapter, u32 addr, u32 len, u8 *wbuf, u8 *rbuf, int retries)
{
int i;
for (i = 0; i < retries; i++) {
if (eeprom_write(adapter, addr, wbuf, len) == len) {
if (eeprom_lrc_read(adapter, addr, len, rbuf, retries) == 1)
return 1;
}
}
return 0;
}
/* These functions could be used to unlock SkyStar2 cards. */
static int eeprom_writeKey(struct adapter *adapter, u8 *key, u32 len)
{
u8 rbuf[20];
u8 wbuf[20];
if (len != 16)
return 0;
memcpy(wbuf, key, len);
wbuf[16] = 0;
wbuf[17] = 0;
wbuf[18] = 0;
wbuf[19] = calc_lrc(wbuf, 19);
return eeprom_lrc_write(adapter, 0x3e4, 20, wbuf, rbuf, 4);
}
static int eeprom_readKey(struct adapter *adapter, u8 *key, u32 len)
{
u8 buf[20];
if (len != 16)
return 0;
if (eeprom_lrc_read(adapter, 0x3e4, 20, buf, 4) == 0)
return 0;
memcpy(key, buf, len);
return 1;
}
static char eeprom_set_mac_addr(struct adapter *adapter, char type, u8 *mac)
{
u8 tmp[8];
if (type != 0) {
tmp[0] = mac[0];
tmp[1] = mac[1];
tmp[2] = mac[2];
tmp[3] = mac[5];
tmp[4] = mac[6];
tmp[5] = mac[7];
} else {
tmp[0] = mac[0];
tmp[1] = mac[1];
tmp[2] = mac[2];
tmp[3] = mac[3];
tmp[4] = mac[4];
tmp[5] = mac[5];
}
tmp[6] = 0;
tmp[7] = calc_lrc(tmp, 7);
if (eeprom_write(adapter, 0x3f8, tmp, 8) == 8)
return 1;
return 0;
}
static int flexcop_eeprom_read(struct flexcop_device *fc, u16 addr, u8 *buf, u16 len)
{
return fc->i2c_request(fc,FC_READ,FC_I2C_PORT_EEPROM,0x50,addr,buf,len);
}
#endif
static u8 calc_lrc(u8 *buf, int len)
{
int i;
u8 sum = 0;
for (i = 0; i < len; i++)
sum = sum ^ buf[i];
return sum;
}
static int flexcop_eeprom_request(struct flexcop_device *fc, flexcop_access_op_t op, u16 addr, u8 *buf, u16 len, int retries)
{
int i,ret = 0;
u8 chipaddr = 0x50 | ((addr >> 8) & 3);
for (i = 0; i < retries; i++)
if ((ret = fc->i2c_request(fc,op,FC_I2C_PORT_EEPROM,chipaddr,addr & 0xff,buf,len)) == 0)
break;
return ret;
}
static int flexcop_eeprom_lrc_read(struct flexcop_device *fc, u16 addr, u8 *buf, u16 len, int retries)
{
int ret = flexcop_eeprom_request(fc,FC_READ,addr,buf,len,retries);
if (ret == 0)
if (calc_lrc(buf, len - 1) != buf[len - 1])
ret = -EINVAL;
return ret;
}
/* TODO how is it handled in USB */
/* JJ's comment about extended == 1: it is not presently used anywhere but was
* added to the low-level functions for possible support of EUI64
*/
int flexcop_eeprom_check_mac_addr(struct flexcop_device *fc, int extended)
{
u8 buf[8];
int ret = 0;
memset(fc->mac_address,0,6);
if ((ret = flexcop_eeprom_lrc_read(fc,0x3f8,buf,8,4)) == 0) {
if (extended != 0) {
err("TODO: extended (EUI64) MAC addresses aren't completely supported yet");
ret = -EINVAL;
/* memcpy(fc->mac_address,buf,3);
mac[3] = 0xfe;
mac[4] = 0xff;
memcpy(&fc->mac_address[3],&buf[5],3); */
} else
memcpy(fc->mac_address,buf,6);
}
return ret;
}
EXPORT_SYMBOL(flexcop_eeprom_check_mac_addr);
drivers/media/dvb/b2c2/flexcop-fe-tuner.c 0 → 100644
View file @ 2add87a9
/*
* This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III
*
* flexcop-fe-tuner.c - methods for attaching a frontend and controlling DiSEqC.
*
* see flexcop.c for copyright information.
*/
#include "flexcop.h"
#include "stv0299.h"
#include "mt352.h"
#include "nxt2002.h"
#include "stv0297.h"
#include "mt312.h"
/* lnb control */
static int flexcop_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
{
struct flexcop_device *fc = fe->dvb->priv;
flexcop_ibi_value v;
deb_tuner("polarity/voltage = %u\n", voltage);
v = fc->read_ibi_reg(fc, misc_204);
switch (voltage) {
case SEC_VOLTAGE_OFF:
v.misc_204.ACPI1_sig = 1;
break;
case SEC_VOLTAGE_13:
v.misc_204.ACPI1_sig = 0;
v.misc_204.LNB_L_H_sig = 0;
break;
case SEC_VOLTAGE_18:
v.misc_204.ACPI1_sig = 0;
v.misc_204.LNB_L_H_sig = 1;
break;
default:
err("unknown SEC_VOLTAGE value");
return -EINVAL;
}
return fc->write_ibi_reg(fc, misc_204, v);
}
static int flexcop_sleep(struct dvb_frontend* fe)
{
struct flexcop_device *fc = fe->dvb->priv;
/* flexcop_ibi_value v = fc->read_ibi_reg(fc,misc_204); */
if (fc->fe_sleep)
return fc->fe_sleep(fe);
/* v.misc_204.ACPI3_sig = 1;
fc->write_ibi_reg(fc,misc_204,v);*/
return 0;
}
static int flexcop_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone)
{
/* u16 wz_half_period_for_45_mhz[] = { 0x01ff, 0x0154, 0x00ff, 0x00cc }; */
struct flexcop_device *fc = fe->dvb->priv;
flexcop_ibi_value v;
u16 ax;
v.raw = 0;
deb_tuner("tone = %u\n",tone);
switch (tone) {
case SEC_TONE_ON:
ax = 0x01ff;
break;
case SEC_TONE_OFF:
ax = 0;
break;
default:
err("unknown SEC_TONE value");
return -EINVAL;
}
v.lnb_switch_freq_200.LNB_CTLPrescaler_sig = 1; /* divide by 2 */
v.lnb_switch_freq_200.LNB_CTLHighCount_sig =
v.lnb_switch_freq_200.LNB_CTLLowCount_sig = ax;
return fc->write_ibi_reg(fc,lnb_switch_freq_200,v);
}
static void flexcop_diseqc_send_bit(struct dvb_frontend* fe, int data)
{
flexcop_set_tone(fe, SEC_TONE_ON);
udelay(data ? 500 : 1000);
flexcop_set_tone(fe, SEC_TONE_OFF);
udelay(data ? 1000 : 500);
}
static void flexcop_diseqc_send_byte(struct dvb_frontend* fe, int data)
{
int i, par = 1, d;
for (i = 7; i >= 0; i--) {
d = (data >> i) & 1;
par ^= d;
flexcop_diseqc_send_bit(fe, d);
}
flexcop_diseqc_send_bit(fe, par);
}
static int flexcop_send_diseqc_msg(struct dvb_frontend* fe, int len, u8 *msg, unsigned long burst)
{
int i;
flexcop_set_tone(fe, SEC_TONE_OFF);
mdelay(16);
for (i = 0; i < len; i++)
flexcop_diseqc_send_byte(fe,msg[i]);
mdelay(16);
if (burst != -1) {
if (burst)
flexcop_diseqc_send_byte(fe, 0xff);
else {
flexcop_set_tone(fe, SEC_TONE_ON);
udelay(12500);
flexcop_set_tone(fe, SEC_TONE_OFF);
}
msleep(20);
}
return 0;
}
static int flexcop_diseqc_send_master_cmd(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd* cmd)
{
return flexcop_send_diseqc_msg(fe, cmd->msg_len, cmd->msg, 0);
}
static int flexcop_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t minicmd)
{
return flexcop_send_diseqc_msg(fe, 0, NULL, minicmd);
}
/* dvb-s stv0299 */
static int samsung_tbmu24112_set_symbol_rate(struct dvb_frontend* fe, u32 srate, u32 ratio)
{
u8 aclk = 0;
u8 bclk = 0;
if (srate < 1500000) { aclk = 0xb7; bclk = 0x47; }
else if (srate < 3000000) { aclk = 0xb7; bclk = 0x4b; }
else if (srate < 7000000) { aclk = 0xb7; bclk = 0x4f; }
else if (srate < 14000000) { aclk = 0xb7; bclk = 0x53; }
else if (srate < 30000000) { aclk = 0xb6; bclk = 0x53; }
else if (srate < 45000000) { aclk = 0xb4; bclk = 0x51; }
stv0299_writereg (fe, 0x13, aclk);
stv0299_writereg (fe, 0x14, bclk);
stv0299_writereg (fe, 0x1f, (ratio >> 16) & 0xff);
stv0299_writereg (fe, 0x20, (ratio >> 8) & 0xff);
stv0299_writereg (fe, 0x21, (ratio ) & 0xf0);
return 0;
}
static int samsung_tbmu24112_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
{
u8 buf[4];
u32 div;
struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) };
struct flexcop_device *fc = fe->dvb->priv;
div = params->frequency / 125;
buf[0] = (div >> 8) & 0x7f;
buf[1] = div & 0xff;
buf[2] = 0x84; /* 0xC4 */
buf[3] = 0x08;
if (params->frequency < 1500000) buf[3] |= 0x10;
if (i2c_transfer(&fc->i2c_adap, &msg, 1) != 1)
return -EIO;
return 0;
}
static u8 samsung_tbmu24112_inittab[] = {
0x01, 0x15,
0x02, 0x30,
0x03, 0x00,
0x04, 0x7D,
0x05, 0x35,
0x06, 0x02,
0x07, 0x00,
0x08, 0xC3,
0x0C, 0x00,
0x0D, 0x81,
0x0E, 0x23,
0x0F, 0x12,
0x10, 0x7E,
0x11, 0x84,
0x12, 0xB9,
0x13, 0x88,
0x14, 0x89,
0x15, 0xC9,
0x16, 0x00,
0x17, 0x5C,
0x18, 0x00,
0x19, 0x00,
0x1A, 0x00,
0x1C, 0x00,
0x1D, 0x00,
0x1E, 0x00,
0x1F, 0x3A,
0x20, 0x2E,
0x21, 0x80,
0x22, 0xFF,
0x23, 0xC1,
0x28, 0x00,
0x29, 0x1E,
0x2A, 0x14,
0x2B, 0x0F,
0x2C, 0x09,
0x2D, 0x05,
0x31, 0x1F,
0x32, 0x19,
0x33, 0xFE,
0x34, 0x93,
0xff, 0xff,
};
static struct stv0299_config samsung_tbmu24112_config = {
.demod_address = 0x68,
.inittab = samsung_tbmu24112_inittab,
.mclk = 88000000UL,
.invert = 0,
.enhanced_tuning = 0,
.skip_reinit = 0,
.lock_output = STV0229_LOCKOUTPUT_LK,
.volt13_op0_op1 = STV0299_VOLT13_OP1,
.min_delay_ms = 100,
.set_symbol_rate = samsung_tbmu24112_set_symbol_rate,
.pll_set = samsung_tbmu24112_pll_set,
};
/* dvb-t mt352 */
static int samsung_tdtc9251dh0_demod_init(struct dvb_frontend* fe)
{
static u8 mt352_clock_config [] = { 0x89, 0x18, 0x2d };
static u8 mt352_reset [] = { 0x50, 0x80 };
static u8 mt352_adc_ctl_1_cfg [] = { 0x8E, 0x40 };
static u8 mt352_agc_cfg [] = { 0x67, 0x28, 0xa1 };
static u8 mt352_capt_range_cfg[] = { 0x75, 0x32 };
mt352_write(fe, mt352_clock_config, sizeof(mt352_clock_config));
udelay(2000);
mt352_write(fe, mt352_reset, sizeof(mt352_reset));
mt352_write(fe, mt352_adc_ctl_1_cfg, sizeof(mt352_adc_ctl_1_cfg));
mt352_write(fe, mt352_agc_cfg, sizeof(mt352_agc_cfg));
mt352_write(fe, mt352_capt_range_cfg, sizeof(mt352_capt_range_cfg));
return 0;
}
static int samsung_tdtc9251dh0_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params, u8* pllbuf)
{
u32 div;
unsigned char bs = 0;
#define IF_FREQUENCYx6 217 /* 6 * 36.16666666667MHz */
div = (((params->frequency + 83333) * 3) / 500000) + IF_FREQUENCYx6;
if (params->frequency >= 48000000 && params->frequency <= 154000000) bs = 0x09;
if (params->frequency >= 161000000 && params->frequency <= 439000000) bs = 0x0a;
if (params->frequency >= 447000000 && params->frequency <= 863000000) bs = 0x08;
pllbuf[0] = 0xc2; /* Note: non-linux standard PLL i2c address */
pllbuf[1] = div >> 8;
pllbuf[2] = div & 0xff;
pllbuf[3] = 0xcc;
pllbuf[4] = bs;
return 0;
}
static struct mt352_config samsung_tdtc9251dh0_config = {
.demod_address = 0x0f,
.demod_init = samsung_tdtc9251dh0_demod_init,
.pll_set = samsung_tdtc9251dh0_pll_set,
};
static int nxt2002_request_firmware(struct dvb_frontend* fe, const struct firmware **fw, char* name)
{
struct flexcop_device *fc = fe->dvb->priv;
return request_firmware(fw, name, fc->dev);
}
static struct nxt2002_config samsung_tbmv_config = {
.demod_address = 0x0a,
.request_firmware = nxt2002_request_firmware,
};
static int skystar23_samsung_tbdu18132_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
{
u8 buf[4];
u32 div;
struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) };
struct flexcop_device *fc = fe->dvb->priv;
div = (params->frequency + (125/2)) / 125;
buf[0] = (div >> 8) & 0x7f;
buf[1] = (div >> 0) & 0xff;
buf[2] = 0x84 | ((div >> 10) & 0x60);
buf[3] = 0x80;
if (params->frequency < 1550000)
buf[3] |= 0x02;
if (i2c_transfer(&fc->i2c_adap, &msg, 1) != 1)
return -EIO;
return 0;
}
static struct mt312_config skystar23_samsung_tbdu18132_config = {
.demod_address = 0x0e,
.pll_set = skystar23_samsung_tbdu18132_pll_set,
};
static struct stv0297_config alps_tdee4_stv0297_config = {
.demod_address = 0x1c,
// .invert = 1,
// .pll_set = alps_tdee4_stv0297_pll_set,
};
/* try to figure out the frontend, each card/box can have on of the following list */
int flexcop_frontend_init(struct flexcop_device *fc)
{
/* try the sky v2.6 (stv0299/Samsung tbmu24112(sl1935)) */
if ((fc->fe = stv0299_attach(&samsung_tbmu24112_config, &fc->i2c_adap)) != NULL) {
fc->fe->ops->set_voltage = flexcop_set_voltage;
fc->fe_sleep = fc->fe->ops->sleep;
fc->fe->ops->sleep = flexcop_sleep;
fc->dev_type = FC_SKY;
info("found the stv0299 at i2c address: 0x%02x",samsung_tbmu24112_config.demod_address);
} else
/* try the air dvb-t (mt352/Samsung tdtc9251dh0(??)) */
if ((fc->fe = mt352_attach(&samsung_tdtc9251dh0_config, &fc->i2c_adap)) != NULL ) {
fc->dev_type = FC_AIR_DVB;
info("found the mt352 at i2c address: 0x%02x",samsung_tdtc9251dh0_config.demod_address);
} else
/* try the air atsc (nxt2002) */
if ((fc->fe = nxt2002_attach(&samsung_tbmv_config, &fc->i2c_adap)) != NULL) {
fc->dev_type = FC_AIR_ATSC;
info("found the nxt2002 at i2c address: 0x%02x",samsung_tbmv_config.demod_address);
} else
/* try the cable dvb (stv0297) */
if ((fc->fe = stv0297_attach(&alps_tdee4_stv0297_config, &fc->i2c_adap, 0xf8)) != NULL) {
fc->dev_type = FC_CABLE;
info("found the stv0297 at i2c address: 0x%02x",alps_tdee4_stv0297_config.demod_address);
} else
/* try the sky v2.3 (vp310/Samsung tbdu18132(tsa5059)) */
if ((fc->fe = vp310_attach(&skystar23_samsung_tbdu18132_config, &fc->i2c_adap)) != NULL) {
fc->fe->ops->diseqc_send_master_cmd = flexcop_diseqc_send_master_cmd;
fc->fe->ops->diseqc_send_burst = flexcop_diseqc_send_burst;
fc->fe->ops->set_tone = flexcop_set_tone;
fc->fe->ops->set_voltage = flexcop_set_voltage;
fc->fe_sleep = fc->fe->ops->sleep;
fc->fe->ops->sleep = flexcop_sleep;
fc->dev_type = FC_SKY_OLD;
info("found the vp310 (aka mt312) at i2c address: 0x%02x",skystar23_samsung_tbdu18132_config.demod_address);
}
if (fc->fe == NULL) {
err("no frontend driver found for this B2C2/FlexCop adapter");
return -ENODEV;
} else {
if (dvb_register_frontend(&fc->dvb_adapter, fc->fe)) {
err("frontend registration failed!");
if (fc->fe->ops->release != NULL)
fc->fe->ops->release(fc->fe);
fc->fe = NULL;
return -EINVAL;
}
}
fc->init_state |= FC_STATE_FE_INIT;
return 0;
}
void flexcop_frontend_exit(struct flexcop_device *fc)
{
if (fc->init_state & FC_STATE_FE_INIT)
dvb_unregister_frontend(fc->fe);
fc->init_state &= ~FC_STATE_FE_INIT;
}
drivers/media/dvb/b2c2/flexcop-hw-filter.c 0 → 100644
View file @ 2add87a9
/*
* This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III
*
* flexcop-hw-filter.c - pid and mac address filtering and corresponding control functions.
*
* see flexcop.c for copyright information.
*/
#include "flexcop.h"
static void flexcop_rcv_data_ctrl(struct flexcop_device *fc, int onoff)
{
flexcop_set_ibi_value(ctrl_208,Rcv_Data_sig,onoff);
}
void flexcop_smc_ctrl(struct flexcop_device *fc, int onoff)
{
flexcop_set_ibi_value(ctrl_208,SMC_Enable_sig,onoff);
}
void flexcop_null_filter_ctrl(struct flexcop_device *fc, int onoff)
{
flexcop_set_ibi_value(ctrl_208,Null_filter_sig,onoff);
}
void flexcop_set_mac_filter(struct flexcop_device *fc, u8 mac[6])
{
flexcop_ibi_value v418,v41c;
v41c = fc->read_ibi_reg(fc,mac_address_41c);
v418.mac_address_418.MAC1 = mac[0];
v418.mac_address_418.MAC2 = mac[1];
v418.mac_address_418.MAC3 = mac[2];
v418.mac_address_418.MAC6 = mac[3];
v41c.mac_address_41c.MAC7 = mac[4];
v41c.mac_address_41c.MAC8 = mac[5];
fc->write_ibi_reg(fc,mac_address_418,v418);
fc->write_ibi_reg(fc,mac_address_41c,v41c);
}
void flexcop_mac_filter_ctrl(struct flexcop_device *fc, int onoff)
{
flexcop_set_ibi_value(ctrl_208,MAC_filter_Mode_sig,onoff);
}
static void flexcop_pid_group_filter(struct flexcop_device *fc, u16 pid, u16 mask)
{
/* index_reg_310.extra_index_reg need to 0 or 7 to work */
flexcop_ibi_value v30c;
v30c.pid_filter_30c_ext_ind_0_7.Group_PID = pid;
v30c.pid_filter_30c_ext_ind_0_7.Group_mask = mask;
fc->write_ibi_reg(fc,pid_filter_30c,v30c);
}
static void flexcop_pid_group_filter_ctrl(struct flexcop_device *fc, int onoff)
{
flexcop_set_ibi_value(ctrl_208,Mask_filter_sig,onoff);
}
/* this fancy define reduces the code size of the quite similar PID controlling of
* the first 6 PIDs
*/
#define pid_ctrl(vregname,field,enablefield,trans_field,transval) \
flexcop_ibi_value vpid = fc->read_ibi_reg(fc, vregname), \
v208 = fc->read_ibi_reg(fc, ctrl_208); \
\
vpid.vregname.field = onoff ? pid : 0x1fff; \
vpid.vregname.trans_field = transval; \
v208.ctrl_208.enablefield = onoff; \
\
fc->write_ibi_reg(fc,vregname,vpid); \
fc->write_ibi_reg(fc,ctrl_208,v208);
static void flexcop_pid_Stream1_PID_ctrl(struct flexcop_device *fc, u16 pid, int onoff)
{
pid_ctrl(pid_filter_300,Stream1_PID,Stream1_filter_sig,Stream1_trans,0);
}
static void flexcop_pid_Stream2_PID_ctrl(struct flexcop_device *fc, u16 pid, int onoff)
{
pid_ctrl(pid_filter_300,Stream2_PID,Stream2_filter_sig,Stream2_trans,0);
}
static void flexcop_pid_PCR_PID_ctrl(struct flexcop_device *fc, u16 pid, int onoff)
{
pid_ctrl(pid_filter_304,PCR_PID,PCR_filter_sig,PCR_trans,0);
}
static void flexcop_pid_PMT_PID_ctrl(struct flexcop_device *fc, u16 pid, int onoff)
{
pid_ctrl(pid_filter_304,PMT_PID,PMT_filter_sig,PMT_trans,0);
}
static void flexcop_pid_EMM_PID_ctrl(struct flexcop_device *fc, u16 pid, int onoff)
{
pid_ctrl(pid_filter_308,EMM_PID,EMM_filter_sig,EMM_trans,0);
}
static void flexcop_pid_ECM_PID_ctrl(struct flexcop_device *fc, u16 pid, int onoff)
{
pid_ctrl(pid_filter_308,ECM_PID,ECM_filter_sig,ECM_trans,0);
}
static void flexcop_pid_control(struct flexcop_device *fc, int index, u16 pid,int onoff)
{
deb_ts("setting pid: %5d %04x at index %d '%s'\n",pid,pid,index,onoff ? "on" : "off");
/* We could use bit magic here to reduce source code size.
* I decided against it, but to use the real register names */
switch (index) {
case 0: flexcop_pid_Stream1_PID_ctrl(fc,pid,onoff); break;
case 1: flexcop_pid_Stream2_PID_ctrl(fc,pid,onoff); break;
case 2: flexcop_pid_PCR_PID_ctrl(fc,pid,onoff); break;
case 3: flexcop_pid_PMT_PID_ctrl(fc,pid,onoff); break;
case 4: flexcop_pid_EMM_PID_ctrl(fc,pid,onoff); break;
case 5: flexcop_pid_ECM_PID_ctrl(fc,pid,onoff); break;
default:
if (fc->has_32_hw_pid_filter && index < 38) {
flexcop_ibi_value vpid,vid;
/* set the index */
vid = fc->read_ibi_reg(fc,index_reg_310);
vid.index_reg_310.index_reg = index - 6;
fc->write_ibi_reg(fc,index_reg_310, vid);
vpid = fc->read_ibi_reg(fc,pid_n_reg_314);
vpid.pid_n_reg_314.PID = onoff ? pid : 0x1fff;
vpid.pid_n_reg_314.PID_enable_bit = onoff;
fc->write_ibi_reg(fc,pid_n_reg_314, vpid);
}
break;
}
}
int flexcop_pid_feed_control(struct flexcop_device *fc, struct dvb_demux_feed *dvbdmxfeed, int onoff)
{
int max_pid_filter = 6 + fc->has_32_hw_pid_filter*32;
fc->feedcount += (onoff ? 1 : -1);
/* when doing hw pid filtering, set the pid */
if (fc->pid_filtering)
flexcop_pid_control(fc,dvbdmxfeed->index,dvbdmxfeed->pid,onoff);
/* if it was the first feed request */
if (fc->feedcount == onoff && onoff) {
if (!fc->pid_filtering) {
deb_ts("enabling full TS transfer\n");
flexcop_pid_group_filter(fc, 0,0);
flexcop_pid_group_filter_ctrl(fc,1);
}
if (fc->stream_control)
fc->stream_control(fc,1);
flexcop_rcv_data_ctrl(fc,1);
/* if there is no more feed left to feed */
} else if (fc->feedcount == onoff && !onoff) {
if (!fc->pid_filtering) {
deb_ts("disabling full TS transfer\n");
flexcop_pid_group_filter(fc, 0x1fe0,0);
flexcop_pid_group_filter_ctrl(fc,0);
}
flexcop_rcv_data_ctrl(fc,0);
if (fc->stream_control)
fc->stream_control(fc,0);
}
/* if pid_filtering is on and more pids than the hw-filter can provide are
* requested enable the whole bandwidth.
*/
if (fc->pid_filtering && fc->feedcount > max_pid_filter) {
flexcop_pid_group_filter(fc, 0,0);
flexcop_pid_group_filter_ctrl(fc,1);
} else if (fc->pid_filtering && fc->feedcount <= max_pid_filter) {
flexcop_pid_group_filter(fc, 0x1fe0,0);
flexcop_pid_group_filter_ctrl(fc,0);
}
return 0;
}
void flexcop_hw_filter_init(struct flexcop_device *fc)
{
int i;
flexcop_ibi_value v;
for (i = 0; i < 6 + 32*fc->has_32_hw_pid_filter; i++)
flexcop_pid_control(fc,i,0x1fff,0);
flexcop_pid_group_filter(fc, 0x1fe0,0);
v = fc->read_ibi_reg(fc,pid_filter_308);
v.pid_filter_308.EMM_filter_4 = 1;
v.pid_filter_308.EMM_filter_6 = 0;
fc->write_ibi_reg(fc,pid_filter_308,v);
}
drivers/media/dvb/b2c2/flexcop-i2c.c 0 → 100644
View file @ 2add87a9
/*
* This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III
*
* flexcop-i2c.c - flexcop internal 2Wire bus (I2C) and dvb i2c initialization
*
* see flexcop.c for copyright information.
*/
#include "flexcop.h"
#define FC_MAX_I2C_RETRIES 100000
static int flexcop_i2c_operation(struct flexcop_device *fc, flexcop_ibi_value *r100, int max_ack_errors)
{
int i,ack_errors = 0;
flexcop_ibi_value r;
r100->tw_sm_c_100.working_start = 1;
deb_i2c("r100 before: %08x\n",r100->raw);
fc->write_ibi_reg(fc, tw_sm_c_100, ibi_zero);
fc->write_ibi_reg(fc, tw_sm_c_100, *r100); /* initiating i2c operation */
for (i = 0; i < FC_MAX_I2C_RETRIES; i++) {
r = fc->read_ibi_reg(fc, tw_sm_c_100);
if (!r.tw_sm_c_100.no_base_addr_ack_error) {
if (r.tw_sm_c_100.st_done) { /* && !r.tw_sm_c_100.working_start */
*r100 = r;
deb_i2c("i2c success\n");
return 0;
}
} else {
deb_i2c("suffering from an i2c ack_error\n");
if (++ack_errors >= max_ack_errors)
break;
fc->write_ibi_reg(fc, tw_sm_c_100, ibi_zero);
fc->write_ibi_reg(fc, tw_sm_c_100, *r100);
}
}
deb_i2c("tried %d times i2c operation, never finished or too many ack errors.\n",i);
return -EREMOTEIO;
}
static int flexcop_i2c_read4(struct flexcop_device *fc, flexcop_ibi_value r100, u8 *buf)
{
flexcop_ibi_value r104;
int len = r100.tw_sm_c_100.total_bytes, /* remember total_bytes is buflen-1 */
ret;
if ((ret = flexcop_i2c_operation(fc,&r100,30)) != 0)
return ret;
r104 = fc->read_ibi_reg(fc,tw_sm_c_104);
deb_i2c("read: r100: %08x, r104: %08x\n",r100.raw,r104.raw);
/* there is at least one byte, otherwise we wouldn't be here */
buf[0] = r100.tw_sm_c_100.data1_reg;
if (len > 0) buf[1] = r104.tw_sm_c_104.data2_reg;
if (len > 1) buf[2] = r104.tw_sm_c_104.data3_reg;
if (len > 2) buf[3] = r104.tw_sm_c_104.data4_reg;
return 0;
}
static int flexcop_i2c_write4(struct flexcop_device *fc, flexcop_ibi_value r100, u8 *buf)
{
flexcop_ibi_value r104;
int len = r100.tw_sm_c_100.total_bytes; /* remember total_bytes is buflen-1 */
r104.raw = 0;
/* there is at least one byte, otherwise we wouldn't be here */
r100.tw_sm_c_100.data1_reg = buf[0];
r104.tw_sm_c_104.data2_reg = len > 0 ? buf[1] : 0;
r104.tw_sm_c_104.data3_reg = len > 1 ? buf[2] : 0;
r104.tw_sm_c_104.data4_reg = len > 2 ? buf[3] : 0;
deb_i2c("write: r100: %08x, r104: %08x\n",r100.raw,r104.raw);
/* write the additional i2c data before doing the actual i2c operation */
fc->write_ibi_reg(fc,tw_sm_c_104,r104);
return flexcop_i2c_operation(fc,&r100,30);
}
/* master xfer callback for demodulator */
static int flexcop_master_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg msgs[], int num)
{
struct flexcop_device *fc = i2c_get_adapdata(i2c_adap);
int i, ret = 0;
if (down_interruptible(&fc->i2c_sem))
return -ERESTARTSYS;
/* reading */
if (num == 2 &&
msgs[0].flags == 0 &&
msgs[1].flags == I2C_M_RD &&
msgs[0].buf != NULL &&
msgs[1].buf != NULL) {
ret = fc->i2c_request(fc, FC_READ, FC_I2C_PORT_DEMOD, msgs[0].addr, msgs[0].buf[0], msgs[1].buf, msgs[1].len);
} else for (i = 0; i < num; i++) { /* writing command */
if (msgs[i].flags != 0 || msgs[i].buf == NULL || msgs[i].len < 2) {
ret = -EINVAL;
break;
}
ret = fc->i2c_request(fc, FC_WRITE, FC_I2C_PORT_DEMOD, msgs[i].addr, msgs[i].buf[0], &msgs[i].buf[1], msgs[i].len - 1);
}
if (ret < 0)
err("i2c master_xfer failed");
else
ret = num;
up(&fc->i2c_sem);
return ret;
}
int flexcop_i2c_request(struct flexcop_device *fc, flexcop_access_op_t op,
flexcop_i2c_port_t port, u8 chipaddr, u8 addr, u8 *buf, u16 len)
{
int ret;
u16 bytes_to_transfer;
flexcop_ibi_value r100;
deb_i2c("op = %d\n",op);
r100.raw = 0;
r100.tw_sm_c_100.chipaddr = chipaddr;
r100.tw_sm_c_100.twoWS_rw = op;
r100.tw_sm_c_100.twoWS_port_reg = port;
while (len != 0) {
bytes_to_transfer = len > 4 ? 4 : len;
r100.tw_sm_c_100.total_bytes = bytes_to_transfer - 1;
r100.tw_sm_c_100.baseaddr = addr;
if (op == FC_READ)
ret = flexcop_i2c_read4(fc, r100, buf);
else
ret = flexcop_i2c_write4(fc,r100, buf);
if (ret < 0)
return ret;
buf += bytes_to_transfer;
addr += bytes_to_transfer;
len -= bytes_to_transfer;
};
return 0;
}
/* exported for PCI i2c */
EXPORT_SYMBOL(flexcop_i2c_request);
static u32 flexcop_i2c_func(struct i2c_adapter *adapter)
{
return I2C_FUNC_I2C;
}
static struct i2c_algorithm flexcop_algo = {
.name = "FlexCop I2C algorithm",
.id = I2C_ALGO_BIT,
.master_xfer = flexcop_master_xfer,
.functionality = flexcop_i2c_func,
};
int flexcop_i2c_init(struct flexcop_device *fc)
{
int ret;
sema_init(&fc->i2c_sem,1);
memset(&fc->i2c_adap, 0, sizeof(struct i2c_adapter));
strncpy(fc->i2c_adap.name, "B2C2 FlexCop device",I2C_NAME_SIZE);
i2c_set_adapdata(&fc->i2c_adap,fc);
fc->i2c_adap.class = I2C_CLASS_TV_DIGITAL;
fc->i2c_adap.algo = &flexcop_algo;
fc->i2c_adap.algo_data = NULL;
fc->i2c_adap.id = I2C_ALGO_BIT;
if ((ret = i2c_add_adapter(&fc->i2c_adap)) < 0)
return ret;
fc->init_state |= FC_STATE_I2C_INIT;
return 0;
}
void flexcop_i2c_exit(struct flexcop_device *fc)
{
if (fc->init_state & FC_STATE_I2C_INIT)
i2c_del_adapter(&fc->i2c_adap);
fc->init_state &= ~FC_STATE_I2C_INIT;
}
drivers/media/dvb/b2c2/flexcop-misc.c 0 → 100644
View file @ 2add87a9
/*
* This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III
*
* flexcop-misc.c - miscellaneous functions.
*
* see flexcop.c for copyright information.
*/
#include "flexcop.h"
void flexcop_determine_revision(struct flexcop_device *fc)
{
flexcop_ibi_value v = fc->read_ibi_reg(fc,misc_204);
switch (v.misc_204.Rev_N_sig_revision_hi) {
case 0x2:
deb_info("found a FlexCopII.\n");
fc->rev = FLEXCOP_II;
break;
case 0x3:
deb_info("found a FlexCopIIb.\n");
fc->rev = FLEXCOP_IIB;
break;
case 0x0:
deb_info("found a FlexCopIII.\n");
fc->rev = FLEXCOP_III;
break;
default:
err("unkown FlexCop Revision: %x. Please report the linux-dvb@linuxtv.org.",v.misc_204.Rev_N_sig_revision_hi);
break;
}
if ((fc->has_32_hw_pid_filter = v.misc_204.Rev_N_sig_caps))
deb_info("this FlexCop has the additional 32 hardware pid filter.\n");
else
deb_info("this FlexCop has only the 6 basic main hardware pid filter.\n");
/* bus parts have to decide if hw pid filtering is used or not. */
}
const char *flexcop_revision_names[] = {
"Unkown chip",
"FlexCopII",
"FlexCopIIb",
"FlexCopIII",
};
const char *flexcop_device_names[] = {
"Unkown device",
"AirStar 2 DVB-T",
"AirStar 2 ATSC",
"SkyStar 2 DVB-S",
"SkyStar 2 DVB-S (old version)",
"CableStar 2 DVB-C",
};
const char *flexcop_bus_names[] = {
"USB",
"PCI",
};
void flexcop_device_name(struct flexcop_device *fc,const char *prefix,const
char *suffix)
{
info("%s '%s' at the '%s' bus controlled by a '%s' %s",prefix,
flexcop_device_names[fc->dev_type],flexcop_bus_names[fc->bus_type],
flexcop_revision_names[fc->rev],suffix);
}
drivers/media/dvb/b2c2/flexcop-pci.c 0 → 100644
View file @ 2add87a9
/*
* This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III
*
* flexcop-pci.c - covers the PCI part including DMA transfers.
*
* see flexcop.c for copyright information.
*/
#define FC_LOG_PREFIX "flexcop-pci"
#include "flexcop-common.h"
static int enable_pid_filtering = 0;
module_param(enable_pid_filtering, int, 0444);
MODULE_PARM_DESC(enable_pid_filtering, "enable hardware pid filtering: supported values: 0 (fullts), 1");
#ifdef CONFIG_DVB_B2C2_FLEXCOP_DEBUG
#define dprintk(level,args...) \
do { if ((debug & level)) printk(args); } while (0)
#define DEBSTATUS ""
#else
#define dprintk(level,args...)
#define DEBSTATUS " (debugging is not enabled)"
#endif
#define deb_info(args...) dprintk(0x01,args)
#define deb_reg(args...) dprintk(0x02,args)
#define deb_ts(args...) dprintk(0x04,args)
#define deb_irq(args...) dprintk(0x08,args)
static int debug = 0;
module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "set debug level (1=info,2=regs,4=TS,8=irqdma (|-able))." DEBSTATUS);
#define DRIVER_VERSION "0.1"
#define DRIVER_NAME "Technisat/B2C2 FlexCop II/IIb/III Digital TV PCI Driver"
#define DRIVER_AUTHOR "Patrick Boettcher <patrick.boettcher@desy.de>"
struct flexcop_pci {
struct pci_dev *pdev;
#define FC_PCI_INIT 0x01
#define FC_PCI_DMA_INIT 0x02
int init_state;
void __iomem *io_mem;
u32 irq;
/* buffersize (at least for DMA1, need to be % 188 == 0,
* this is logic is required */
#define FC_DEFAULT_DMA1_BUFSIZE (1280 * 188)
#define FC_DEFAULT_DMA2_BUFSIZE (10 * 188)
struct flexcop_dma dma[2];
int active_dma1_addr; /* 0 = addr0 of dma1; 1 = addr1 of dma1 */
u32 last_dma1_cur_pos; /* position of the pointer last time the timer/packet irq occured */
struct flexcop_device *fc_dev;
};
static int lastwreg,lastwval,lastrreg,lastrval;
static flexcop_ibi_value flexcop_pci_read_ibi_reg (struct flexcop_device *fc, flexcop_ibi_register r)
{
struct flexcop_pci *fc_pci = fc->bus_specific;
flexcop_ibi_value v;
v.raw = readl(fc_pci->io_mem + r);
if (lastrreg != r || lastrval != v.raw) {
lastrreg = r; lastrval = v.raw;
deb_reg("new rd: %3x: %08x\n",r,v.raw);
}
return v;
}
static int flexcop_pci_write_ibi_reg(struct flexcop_device *fc, flexcop_ibi_register r, flexcop_ibi_value v)
{
struct flexcop_pci *fc_pci = fc->bus_specific;
if (lastwreg != r || lastwval != v.raw) {
lastwreg = r; lastwval = v.raw;
deb_reg("new wr: %3x: %08x\n",r,v.raw);
}
writel(v.raw, fc_pci->io_mem + r);
return 0;
}
/* When PID filtering is turned on, we use the timer IRQ, because small amounts
* of data need to be passed to the user space instantly as well. When PID
* filtering is turned off, we use the page-change-IRQ */
static irqreturn_t flexcop_pci_irq(int irq, void *dev_id, struct pt_regs *regs)
{
struct flexcop_pci *fc_pci = dev_id;
struct flexcop_device *fc = fc_pci->fc_dev;
flexcop_ibi_value v = fc->read_ibi_reg(fc,irq_20c);
deb_irq("irq: %08x cur_addr: %08x (%d), our addrs. 1: %08x 2: %08x; 0x000: "
"%08x, 0x00c: %08x\n",v.raw,
fc->read_ibi_reg(fc,dma1_008).dma_0x8.dma_cur_addr << 2,
fc_pci->active_dma1_addr,
fc_pci->dma[0].dma_addr0,fc_pci->dma[0].dma_addr1,
fc->read_ibi_reg(fc,dma1_000).raw,
fc->read_ibi_reg(fc,dma1_00c).raw);
if (v.irq_20c.DMA1_IRQ_Status == 1) {
if (fc_pci->active_dma1_addr == 0)
flexcop_pass_dmx_packets(fc_pci->fc_dev,fc_pci->dma[0].cpu_addr0,fc_pci->dma[0].size / 188);
else
flexcop_pass_dmx_packets(fc_pci->fc_dev,fc_pci->dma[0].cpu_addr1,fc_pci->dma[0].size / 188);
deb_irq("page change to page: %d\n",!fc_pci->active_dma1_addr);
fc_pci->active_dma1_addr = !fc_pci->active_dma1_addr;
} else if (v.irq_20c.DMA1_Timer_Status == 1) {
/* for the timer IRQ we only can use buffer dmx feeding, because we don't have
* complete TS packets when reading from the DMA memory */
dma_addr_t cur_addr =
fc->read_ibi_reg(fc,dma1_008).dma_0x8.dma_cur_addr << 2;
u32 cur_pos = cur_addr - fc_pci->dma[0].dma_addr0;
/* buffer end was reached, restarted from the beginning
* pass the data from last_cur_pos to the buffer end to the demux
*/
if (cur_pos < fc_pci->last_dma1_cur_pos) {
flexcop_pass_dmx_data(fc_pci->fc_dev,
fc_pci->dma[0].cpu_addr0 + fc_pci->last_dma1_cur_pos,
(fc_pci->dma[0].size*2 - 1) - fc_pci->last_dma1_cur_pos);
fc_pci->last_dma1_cur_pos = 0;
}
if (cur_pos > fc_pci->last_dma1_cur_pos) {
flexcop_pass_dmx_data(fc_pci->fc_dev,
fc_pci->dma[0].cpu_addr0 + fc_pci->last_dma1_cur_pos,
cur_pos - fc_pci->last_dma1_cur_pos);
}
fc_pci->last_dma1_cur_pos = cur_pos;
}
/* packet count would be ideal for hw filtering, but it isn't working. Either
* the data book is wrong, or I'm unable to read it correctly */
/* if (v.irq_20c.DMA1_Size_IRQ_Status == 1) { packet counter */
return IRQ_HANDLED;
}
static int flexcop_pci_stream_control(struct flexcop_device *fc, int onoff)
{
struct flexcop_pci *fc_pci = fc->bus_specific;
if (onoff) {
flexcop_dma_config(fc,&fc_pci->dma[0],FC_DMA_1,FC_DMA_SUBADDR_0 | FC_DMA_SUBADDR_1);
flexcop_dma_config(fc,&fc_pci->dma[1],FC_DMA_2,FC_DMA_SUBADDR_0 | FC_DMA_SUBADDR_1);
flexcop_dma_config_timer(fc,FC_DMA_1,1);
if (fc_pci->fc_dev->pid_filtering) {
fc_pci->last_dma1_cur_pos = 0;
flexcop_dma_control_timer_irq(fc,FC_DMA_1,1);
} else {
fc_pci->active_dma1_addr = 0;
flexcop_dma_control_size_irq(fc,FC_DMA_1,1);
}
/* flexcop_dma_config_packet_count(fc,FC_DMA_1,0xc0);
flexcop_dma_control_packet_irq(fc,FC_DMA_1,1); */
deb_irq("irqs enabled\n");
} else {
if (fc_pci->fc_dev->pid_filtering)
flexcop_dma_control_timer_irq(fc,FC_DMA_1,0);
else
flexcop_dma_control_size_irq(fc,FC_DMA_1,0);
// flexcop_dma_control_packet_irq(fc,FC_DMA_1,0);
deb_irq("irqs disabled\n");
}
return 0;
}
static int flexcop_pci_dma_init(struct flexcop_pci *fc_pci)
{
int ret;
if ((ret = flexcop_dma_allocate(fc_pci->pdev,&fc_pci->dma[0],FC_DEFAULT_DMA1_BUFSIZE)) != 0)
return ret;
if ((ret = flexcop_dma_allocate(fc_pci->pdev,&fc_pci->dma[1],FC_DEFAULT_DMA2_BUFSIZE)) != 0)
goto dma1_free;
flexcop_sram_set_dest(fc_pci->fc_dev,FC_SRAM_DEST_MEDIA | FC_SRAM_DEST_NET, FC_SRAM_DEST_TARGET_DMA1);
flexcop_sram_set_dest(fc_pci->fc_dev,FC_SRAM_DEST_CAO | FC_SRAM_DEST_CAI, FC_SRAM_DEST_TARGET_DMA2);
fc_pci->init_state |= FC_PCI_DMA_INIT;
goto success;
dma1_free:
flexcop_dma_free(&fc_pci->dma[0]);
success:
return ret;
}
static void flexcop_pci_dma_exit(struct flexcop_pci *fc_pci)
{
if (fc_pci->init_state & FC_PCI_DMA_INIT) {
flexcop_dma_free(&fc_pci->dma[0]);
flexcop_dma_free(&fc_pci->dma[1]);
}
fc_pci->init_state &= ~FC_PCI_DMA_INIT;
}
static int flexcop_pci_init(struct flexcop_pci *fc_pci)
{
int ret;
u8 card_rev;
pci_read_config_byte(fc_pci->pdev, PCI_CLASS_REVISION, &card_rev);
info("card revision %x", card_rev);
if ((ret = pci_enable_device(fc_pci->pdev)) != 0)
return ret;
pci_set_master(fc_pci->pdev);
/* enable interrupts */
// pci_write_config_dword(pdev, 0x6c, 0x8000);
if ((ret = pci_request_regions(fc_pci->pdev, DRIVER_NAME)) != 0)
goto err_pci_disable_device;
fc_pci->io_mem = pci_iomap(fc_pci->pdev, 0, 0x800);
if (!fc_pci->io_mem) {
err("cannot map io memory\n");
ret = -EIO;
goto err_pci_release_regions;
}
pci_set_drvdata(fc_pci->pdev, fc_pci);
if ((ret = request_irq(fc_pci->pdev->irq, flexcop_pci_irq,
SA_SHIRQ, DRIVER_NAME, fc_pci)) != 0)
goto err_pci_iounmap;
fc_pci->init_state |= FC_PCI_INIT;
goto success;
err_pci_iounmap:
pci_iounmap(fc_pci->pdev, fc_pci->io_mem);
pci_set_drvdata(fc_pci->pdev, NULL);
err_pci_release_regions:
pci_release_regions(fc_pci->pdev);
err_pci_disable_device:
pci_disable_device(fc_pci->pdev);
success:
return ret;
}
static void flexcop_pci_exit(struct flexcop_pci *fc_pci)
{
if (fc_pci->init_state & FC_PCI_INIT) {
free_irq(fc_pci->pdev->irq, fc_pci);
pci_iounmap(fc_pci->pdev, fc_pci->io_mem);
pci_set_drvdata(fc_pci->pdev, NULL);
pci_release_regions(fc_pci->pdev);
pci_disable_device(fc_pci->pdev);
}
fc_pci->init_state &= ~FC_PCI_INIT;
}
static int flexcop_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
{
struct flexcop_device *fc;
struct flexcop_pci *fc_pci;
int ret = -ENOMEM;
if ((fc = flexcop_device_kmalloc(sizeof(struct flexcop_pci))) == NULL) {
err("out of memory\n");
return -ENOMEM;
}
/* general flexcop init */
fc_pci = fc->bus_specific;
fc_pci->fc_dev = fc;
fc->read_ibi_reg = flexcop_pci_read_ibi_reg;
fc->write_ibi_reg = flexcop_pci_write_ibi_reg;
fc->i2c_request = flexcop_i2c_request;
fc->get_mac_addr = flexcop_eeprom_check_mac_addr;
fc->stream_control = flexcop_pci_stream_control;
fc->pid_filtering = enable_pid_filtering;
fc->bus_type = FC_PCI;
fc->dev = &pdev->dev;
/* bus specific part */
fc_pci->pdev = pdev;
if ((ret = flexcop_pci_init(fc_pci)) != 0)
goto err_kfree;
/* init flexcop */
if ((ret = flexcop_device_initialize(fc)) != 0)
goto err_pci_exit;
/* init dma */
if ((ret = flexcop_pci_dma_init(fc_pci)) != 0)
goto err_fc_exit;
goto success;
err_fc_exit:
flexcop_device_exit(fc);
err_pci_exit:
flexcop_pci_exit(fc_pci);
err_kfree:
flexcop_device_kfree(fc);
success:
return ret;
}
/* in theory every _exit function should be called exactly two times,
* here and in the bail-out-part of the _init-function
*/
static void flexcop_pci_remove(struct pci_dev *pdev)
{
struct flexcop_pci *fc_pci = pci_get_drvdata(pdev);
flexcop_pci_dma_exit(fc_pci);
flexcop_device_exit(fc_pci->fc_dev);
flexcop_pci_exit(fc_pci);
flexcop_device_kfree(fc_pci->fc_dev);
}
static struct pci_device_id flexcop_pci_tbl[] = {
{ PCI_DEVICE(0x13d0, 0x2103) },
/* { PCI_DEVICE(0x13d0, 0x2200) }, PCI FlexCopIII ? */
{ },
};
MODULE_DEVICE_TABLE(pci, flexcop_pci_tbl);
static struct pci_driver flexcop_pci_driver = {
.name = "Technisat/B2C2 FlexCop II/IIb/III PCI",
.id_table = flexcop_pci_tbl,
.probe = flexcop_pci_probe,
.remove = flexcop_pci_remove,
};
static int __init flexcop_pci_module_init(void)
{
return pci_register_driver(&flexcop_pci_driver);
}
static void __exit flexcop_pci_module_exit(void)
{
pci_unregister_driver(&flexcop_pci_driver);
}
module_init(flexcop_pci_module_init);
module_exit(flexcop_pci_module_exit);
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_NAME);
MODULE_LICENSE("GPL");
drivers/media/dvb/b2c2/flexcop-reg.h 0 → 100644
View file @ 2add87a9
/*
* This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III
*
* flexcop-reg.h - register abstraction for FlexCopII, FlexCopIIb and FlexCopIII
*
* see flexcop.c for copyright information.
*/
#ifndef __FLEXCOP_REG_H__
#define __FLEXCOP_REG_H__
typedef enum {
FLEXCOP_UNK = 0,
FLEXCOP_II,
FLEXCOP_IIB,
FLEXCOP_III,
} flexcop_revision_t;
extern const char *flexcop_revision_names[];
typedef enum {
FC_UNK = 0,
FC_AIR_DVB,
FC_AIR_ATSC,
FC_SKY,
FC_SKY_OLD,
FC_CABLE,
} flexcop_device_type_t;
typedef enum {
FC_USB = 0,
FC_PCI,
} flexcop_bus_t;
extern const char *flexcop_device_names[];
/* FlexCop IBI Registers */
/* flexcop_ibi_reg - a huge union representing the register structure */
typedef union {
u32 raw;
/* DMA 0x000 to 0x01c
* DMA1 0x000 to 0x00c
* DMA2 0x010 to 0x01c
*/
struct {
u32 dma_0start : 1; /* set: data will be delivered to dma1_address0 */
u32 dma_0No_update : 1; /* set: dma1_cur_address will be updated, unset: no update */
u32 dma_address0 :30; /* physical/virtual host memory address0 DMA */
} dma_0x0;
struct {
u32 DMA_maxpackets : 8; /* (remapped) PCI DMA1 Packet Count Interrupt. This variable
is able to be read and written while bit(1) of register
0x00c (remap_enable) is set. This variable represents
the number of packets that will be transmitted to the PCI
host using PCI DMA1 before an interrupt to the PCI is
asserted. This functionality may be enabled using bit(20)
of register 0x208. N=0 disables the IRQ. */
u32 dma_addr_size :24; /* size of memory buffer in DWORDs (bytesize / 4) for DMA */
} dma_0x4_remap;
struct {
u32 dma1timer : 7; /* reading PCI DMA1 timer ... when remap_enable is 0 */
u32 unused : 1;
u32 dma_addr_size :24;
} dma_0x4_read;
struct {
u32 unused : 1;
u32 dmatimer : 7; /* writing PCI DMA1 timer ... when remap_enable is 0 */
u32 dma_addr_size :24;
} dma_0x4_write;
struct {
u32 unused : 2;
u32 dma_cur_addr :30; /* current physical host memory address pointer for DMA */
} dma_0x8;
struct {
u32 dma_1start : 1; /* set: data will be delivered to dma_address1, when dma_address0 is full */
u32 remap_enable : 1; /* remap enable for 0x0x4(7:0) */
u32 dma_address1 :30; /* Physical/virtual address 1 on DMA */
} dma_0xc;
/* Two-wire Serial Master and Clock 0x100-0x110 */
struct {
// u32 slave_transmitter : 1; /* ???*/
u32 chipaddr : 7; /* two-line serial address of the target slave */
u32 reserved1 : 1;
u32 baseaddr : 8; /* address of the location of the read/write operation */
u32 data1_reg : 8; /* first byte in two-line serial read/write operation */
u32 working_start : 1; /* when doing a write operation this indicator is 0 when ready
* set to 1 when doing a write operation */
u32 twoWS_rw : 1; /* read/write indicator (1 = read, 0 write) */
u32 total_bytes : 2; /* number of data bytes in each two-line serial transaction (0 = 1 byte, 11 = 4byte)*/
u32 twoWS_port_reg : 2; /* port selection: 01 - Front End/Demod, 10 - EEPROM, 11 - Tuner */
u32 no_base_addr_ack_error : 1; /* writing: write-req: frame is produced w/o baseaddr, read-req: read-cycles w/o
* preceding address assignment write frame
* ACK_ERROR = 1 when no ACK from slave in the last transaction */
u32 st_done : 1; /* indicator for transaction is done */
} tw_sm_c_100;
struct {
u32 data2_reg : 8; /* 2nd data byte */
u32 data3_reg : 8; /* 3rd data byte */
u32 data4_reg : 8; /* 4th data byte */
u32 exlicit_stops : 1; /* when set, transactions are produced w/o trailing STOP flag, then send isolated STOP flags */
u32 force_stop : 1; /* isolated stop flag */
u32 unused : 6;
} tw_sm_c_104;
/* Clock. The register allows the FCIII to convert an incoming Master clock
* (MCLK) signal into a lower frequency clock through the use of a LowCounter
* (TLO) and a High- Counter (THI). The time counts for THI and TLO are
* measured in MCLK; each count represents 4 MCLK input clock cycles.
*
* The default output for port #1 is set for Front End Demod communication. (0x108)
* The default output for port #2 is set for EEPROM communication. (0x10c)
* The default output for port #3 is set for Tuner communication. (0x110)
*/
struct {
u32 thi1 : 6; /* Thi for port #1 (def: 100110b; 38) */
u32 reserved1 : 2;
u32 tlo1 : 5; /* Tlo for port #1 (def: 11100b; 28) */
u32 reserved2 :19;
} tw_sm_c_108;
struct {
u32 thi1 : 6; /* Thi for port #2 (def: 111001b; 57) */
u32 reserved1 : 2;
u32 tlo1 : 5; /* Tlo for port #2 (def: 11100b; 28) */
u32 reserved2 :19;
} tw_sm_c_10c;
struct {
u32 thi1 : 6; /* Thi for port #3 (def: 111001b; 57) */
u32 reserved1 : 2;
u32 tlo1 : 5; /* Tlo for port #3 (def: 11100b; 28) */
u32 reserved2 :19;
} tw_sm_c_110;
/* LNB Switch Frequency 0x200
* Clock that creates the LNB switch tone. The default is set to have a fixed
* low output (not oscillating) to the LNB_CTL line.
*/
struct {
u32 LNB_CTLHighCount_sig :15; /* It is the number of pre-scaled clock cycles that will be low. */
u32 LNB_CTLLowCount_sig :15; /* For example, to obtain a 22KHz output given a 45 Mhz Master
Clock signal (MCLK), set PreScalar=01 and LowCounter value to 0x1ff. */
u32 LNB_CTLPrescaler_sig : 2; /* pre-scaler divides MCLK: 00 (no division), 01 by 2, 10 by 4, 11 by 12 */
} lnb_switch_freq_200;
/* ACPI, Peripheral Reset, LNB Polarity
* ACPI power conservation mode, LNB polarity selection (low or high voltage),
* and peripheral reset.
*/
struct {
u32 ACPI1_sig : 1; /* turn of the power of tuner and LNB, not implemented in FCIII */
u32 ACPI3_sig : 1; /* turn of power of the complete satelite receiver board (except FCIII) */
u32 LNB_L_H_sig : 1; /* low or high voltage for LNB. (0 = low, 1 = high) */
u32 Per_reset_sig : 1; /* misc. init reset (default: 1), to reset set to low and back to high */
u32 reserved :20;
u32 Rev_N_sig_revision_hi : 4;/* 0xc in case of FCIII */
u32 Rev_N_sig_reserved1 : 2;
u32 Rev_N_sig_caps : 1; /* if 1, FCIII has 32 PID- and MAC-filters and is capable of IP multicast */
u32 Rev_N_sig_reserved2 : 1;
} misc_204;
/* Control and Status 0x208 to 0x21c */
/* Gross enable and disable control */
struct {
u32 Stream1_filter_sig : 1; /* Stream1 PID filtering */
u32 Stream2_filter_sig : 1; /* Stream2 PID filtering */
u32 PCR_filter_sig : 1; /* PCR PID filter */
u32 PMT_filter_sig : 1; /* PMT PID filter */
u32 EMM_filter_sig : 1; /* EMM PID filter */
u32 ECM_filter_sig : 1; /* ECM PID filter */
u32 Null_filter_sig : 1; /* Filters null packets, PID=0x1fff. */
u32 Mask_filter_sig : 1; /* mask PID filter */
u32 WAN_Enable_sig : 1; /* WAN output line through V8 memory space is activated. */
u32 WAN_CA_Enable_sig : 1; /* not in FCIII */
u32 CA_Enable_sig : 1; /* not in FCIII */
u32 SMC_Enable_sig : 1; /* CI stream data (CAI) goes directly to the smart card intf (opposed IBI 0x600 or SC-cmd buf). */
u32 Per_CA_Enable_sig : 1; /* not in FCIII */
u32 Multi2_Enable_sig : 1; /* ? */
u32 MAC_filter_Mode_sig : 1; /* (MAC_filter_enable) Globally enables MAC filters for Net PID filteres. */
u32 Rcv_Data_sig : 1; /* PID filtering module enable. When this bit is a one, the PID filter will
examine and process packets according to all other (individual) PID
filtering controls. If it a zero, no packet processing of any kind will
take place. All data from the tuner will be thrown away. */
u32 DMA1_IRQ_Enable_sig : 1; /* When set, a DWORD counter is enabled on PCI DMA1 that asserts the PCI
* interrupt after the specified count for filling the buffer. */
u32 DMA1_Timer_Enable_sig : 1; /* When set, a timer is enabled on PCI DMA1 that asserts the PCI interrupt
after a specified amount of time. */
u32 DMA2_IRQ_Enable_sig : 1; /* same as DMA1_IRQ_Enable_sig but for DMA2 */
u32 DMA2_Timer_Enable_sig : 1; /* same as DMA1_Timer_Enable_sig but for DMA2 */
u32 DMA1_Size_IRQ_Enable_sig : 1; /* When set, a packet count detector is enabled on PCI DMA1 that asserts the PCI interrupt. */
u32 DMA2_Size_IRQ_Enable_sig : 1; /* When set, a packet count detector is enabled on PCI DMA2 that asserts the PCI interrupt. */
u32 Mailbox_from_V8_Enable_sig: 1; /* When set, writes to the mailbox register produce an interrupt to the
PCI host to indicate that mailbox data is available. */
u32 unused : 9;
} ctrl_208;
/* General status. When a PCI interrupt occurs, this register is read to
* discover the reason for the interrupt.
*/
struct {
u32 DMA1_IRQ_Status : 1; /* When set(1) the DMA1 counter had generated an IRQ. Read Only. */
u32 DMA1_Timer_Status : 1; /* When set(1) the DMA1 timer had generated an IRQ. Read Only. */
u32 DMA2_IRQ_Status : 1; /* When set(1) the DMA2 counter had generated an IRQ. Read Only. */
u32 DMA2_Timer_Status : 1; /* When set(1) the DMA2 timer had generated an IRQ. Read Only. */
u32 DMA1_Size_IRQ_Status : 1; /* (Read only). This register is read after an interrupt to */
u32 DMA2_Size_IRQ_Status : 1; /* find out why we had an IRQ. Reading this register will clear this bit. Packet count*/
u32 Mailbox_from_V8_Status_sig: 1; /* Same as above. Reading this register will clear this bit. */
u32 Data_receiver_error : 1; /* 1 indicate an error in the receiver Front End (Tuner module) */
u32 Continuity_error_flag : 1; /* 1 indicates a continuity error in the TS stream. */
u32 LLC_SNAP_FLAG_set : 1; /* 1 indicates that the LCC_SNAP_FLAG was set. */
u32 Transport_Error : 1; /* When set indicates that an unexpected packet was received. */
u32 reserved :21;
} irq_20c;
/* Software reset register */
struct {
u32 reset_blocks : 8; /* Enabled when Block_reset_enable = 0xB2 and 0x208 bits 15:8 = 0x00.
Each bit location represents a 0x100 block of registers. Writing
a one in a bit location resets that block of registers and the logic
that it controls. */
u32 Block_reset_enable : 8; /* This variable is set to 0xB2 when the register is written. */
u32 Special_controls :16; /* Asserts Reset_V8 => 0xC258; Turns on pci encryption => 0xC25A;
Turns off pci encryption => 0xC259 Note: pci_encryption default
at power-up is ON. */
} sw_reset_210;
struct {
u32 vuart_oe_sig : 1; /* When clear, the V8 processor has sole control of the serial UART
(RS-232 Smart Card interface). When set, the IBI interface
defined by register 0x600 controls the serial UART. */
u32 v2WS_oe_sig : 1; /* When clear, the V8 processor has direct control of the Two-line
Serial Master EEPROM target. When set, the Two-line Serial Master
EEPROM target interface is controlled by IBI register 0x100. */
u32 halt_V8_sig : 1; /* When set, contiguous wait states are applied to the V8-space
bus masters. Once this signal is cleared, normal V8-space
operations resume. */
u32 section_pkg_enable_sig: 1; /* When set, this signal enables the front end translation circuitry
to process section packed transport streams. */
u32 s2p_sel_sig : 1; /* Serial to parallel conversion. When set, polarized transport data
within the FlexCop3 front end circuitry is converted from a serial
stream into parallel data before downstream processing otherwise
interprets the data. */
u32 unused1 : 3;
u32 polarity_PS_CLK_sig: 1; /* This signal is used to invert the input polarity of the tranport
stream CLOCK signal before any processing occurs on the transport
stream within FlexCop3. */
u32 polarity_PS_VALID_sig: 1; /* This signal is used to invert the input polarity of the tranport
stream VALID signal before any processing occurs on the transport
stream within FlexCop3. */
u32 polarity_PS_SYNC_sig: 1; /* This signal is used to invert the input polarity of the tranport
stream SYNC signal before any processing occurs on the transport
stream within FlexCop3. */
u32 polarity_PS_ERR_sig: 1; /* This signal is used to invert the input polarity of the tranport
stream ERROR signal before any processing occurs on the transport
stream within FlexCop3. */
u32 unused2 :20;
} misc_214;
/* Mailbox from V8 to host */
struct {
u32 Mailbox_from_V8 :32; /* When this register is written by either the V8 processor or by an
end host, an interrupt is generated to the PCI host to indicate
that mailbox data is available. Reading register 20c will clear
the IRQ. */
} mbox_v8_to_host_218;
/* Mailbox from host to v8 Mailbox_to_V8
* Mailbox_to_V8 mailbox storage register
* used to send messages from PCI to V8. Writing to this register will send an
* IRQ to the V8. Then it can read the data from here. Reading this register
* will clear the IRQ. If the V8 is halted and bit 31 of this register is set,
* then this register is used instead as a direct interface to access the
* V8space memory.
*/
struct {
u32 sysramaccess_data : 8; /* Data byte written or read from the specified address in V8 SysRAM. */
u32 sysramaccess_addr :15; /* 15 bit address used to access V8 Sys-RAM. */
u32 unused : 7;
u32 sysramaccess_write: 1; /* Write flag used to latch data into the V8 SysRAM. */
u32 sysramaccess_busmuster: 1; /* Setting this bit when the V8 is halted at 0x214 Bit(2) allows
this IBI register interface to directly drive the V8-space memory. */
} mbox_host_to_v8_21c;
/* PIDs, Translation Bit, SMC Filter Select 0x300 to 0x31c */
struct {
u32 Stream1_PID :13; /* Primary use is receiving Net data, so these 13 bits normally
hold the PID value for the desired network stream. */
u32 Stream1_trans : 1; /* When set, Net translation will take place for Net data ferried in TS packets. */
u32 MAC_Multicast_filter : 1; /* When clear, multicast MAC filtering is not allowed for Stream1 and PID_n filters. */
u32 debug_flag_pid_saved : 1;
u32 Stream2_PID :13; /* 13 bits for Stream 2 PID filter value. General use. */
u32 Stream2_trans : 1; /* When set Tables/CAI translation will take place for the data ferried in
Stream2_PID TS packets. */
u32 debug_flag_write_status00 : 1;
u32 debug_fifo_problem : 1;
} pid_filter_300;
struct {
u32 PCR_PID :13; /* PCR stream PID filter value. Primary use is Program Clock Reference stream filtering. */
u32 PCR_trans : 1; /* When set, Tables/CAI translation will take place for these packets. */
u32 debug_overrun3 : 1;
u32 debug_overrun2 : 1;
u32 PMT_PID :13; /* stream PID filter value. Primary use is Program Management Table segment filtering. */
u32 PMT_trans : 1; /* When set, Tables/CAI translation will take place for these packets. */
u32 reserved : 2;
} pid_filter_304;
struct {
u32 EMM_PID :13; /* EMM PID filter value. Primary use is Entitlement Management Messaging for
conditional access-related data. */
u32 EMM_trans : 1; /* When set, Tables/CAI translation will take place for these packets. */
u32 EMM_filter_4 : 1; /* When set will pass only EMM data possessing the same ID code as the
first four bytes (32 bits) of the end-user s 6-byte Smart Card ID number Select */
u32 EMM_filter_6 : 1; /* When set will pass only EMM data possessing the same 6-byte code as the end-users
complete 6-byte Smart Card ID number. */
u32 ECM_PID :13; /* ECM PID filter value. Primary use is Entitlement Control Messaging for conditional
access-related data. */
u32 ECM_trans : 1; /* When set, Tables/CAI translation will take place for these packets. */
u32 reserved : 2;
} pid_filter_308;
struct {
u32 Group_PID :13; /* PID value for group filtering. */
u32 Group_trans : 1; /* When set, Tables/CAI translation will take place for these packets. */
u32 unused1 : 2;
u32 Group_mask :13; /* Mask value used in logical "and" equation that defines group filtering */
u32 unused2 : 3;
} pid_filter_30c_ext_ind_0_7;
struct {
u32 net_master_read :17;
u32 unused :15;
} pid_filter_30c_ext_ind_1;
struct {
u32 net_master_write :17;
u32 unused :15;
} pid_filter_30c_ext_ind_2;
struct {
u32 next_net_master_write :17;
u32 unused :15;
} pid_filter_30c_ext_ind_3;
struct {
u32 unused1 : 1;
u32 state_write :10;
u32 reserved1 : 6; /* default: 000100 */
u32 stack_read :10;
u32 reserved2 : 5; /* default: 00100 */
} pid_filter_30c_ext_ind_4;
struct {
u32 stack_cnt :10;
u32 unused :22;
} pid_filter_30c_ext_ind_5;
struct {
u32 pid_fsm_save_reg0 : 2;
u32 pid_fsm_save_reg1 : 2;
u32 pid_fsm_save_reg2 : 2;
u32 pid_fsm_save_reg3 : 2;
u32 pid_fsm_save_reg4 : 2;
u32 pid_fsm_save_reg300 : 2;
u32 write_status1 : 2;
u32 write_status4 : 2;
u32 data_size_reg :12;
u32 unused : 4;
} pid_filter_30c_ext_ind_6;
struct {
u32 index_reg : 5; /* (Index pointer) Points at an internal PIDn register. A binary code
representing one of 32 internal PIDn registers as well as its
corresponding internal MAC_lown register. */
u32 extra_index_reg : 3; /* This vector is used to select between sets of debug signals routed to register 0x30c. */
u32 AB_select : 1; /* Used in conjunction with 0x31c. read/write to the MAC_highA or MAC_highB register
0=MAC_highB register, 1=MAC_highA */
u32 pass_alltables : 1; /* 1=Net packets are not filtered against the Network Table ID found in register 0x400.
All types of networks (DVB, ATSC, ISDB) are passed. */
u32 unused :22;
} index_reg_310;
struct {
u32 PID :13; /* PID value */
u32 PID_trans : 1; /* translation will take place for packets filtered */
u32 PID_enable_bit : 1; /* When set this PID filter is enabled */
u32 reserved :17;
} pid_n_reg_314;
struct {
u32 A4_byte : 8;
u32 A5_byte : 8;
u32 A6_byte : 8;
u32 Enable_bit : 1; /* enabled (1) or disabled (1) */
u32 HighAB_bit : 1; /* use MAC_highA (1) or MAC_highB (0) as MSB */
u32 reserved : 6;
} mac_low_reg_318;
struct {
u32 A1_byte : 8;
u32 A2_byte : 8;
u32 A3_byte : 8;
u32 reserved : 8;
} mac_high_reg_31c;
/* Table, SMCID,MACDestination Filters 0x400 to 0x41c */
struct {
u32 reserved :16;
#define fc_data_Tag_ID_DVB 0x3e
#define fc_data_Tag_ID_ATSC 0x3f
#define fc_data_Tag_ID_IDSB 0x8b
u32 data_Tag_ID :16;
} data_tag_400;
struct {
u32 Card_IDbyte6 : 8;
u32 Card_IDbyte5 : 8;
u32 Card_IDbyte4 : 8;
u32 Card_IDbyte3 : 8;
} card_id_408;
struct {
u32 Card_IDbyte2 : 8;
u32 Card_IDbyte1 : 8;
} card_id_40c;
/* holding the unique mac address of the receiver which houses the FlexCopIII */
struct {
u32 MAC1 : 8;
u32 MAC2 : 8;
u32 MAC3 : 8;
u32 MAC6 : 8;
} mac_address_418;
struct {
u32 MAC7 : 8;
u32 MAC8 : 8;
u32 reserved : 16;
} mac_address_41c;
struct {
u32 transmitter_data_byte : 8;
u32 ReceiveDataReady : 1;
u32 ReceiveByteFrameError: 1;
u32 txbuffempty : 1;
u32 reserved :21;
} ci_600;
struct {
u32 pi_d : 8;
u32 pi_ha :20;
u32 pi_rw : 1;
u32 pi_component_reg : 3;
} pi_604;
struct {
u32 serialReset : 1;
u32 oncecycle_read : 1;
u32 Timer_Read_req : 1;
u32 Timer_Load_req : 1;
u32 timer_data : 7;
u32 unused : 1; /* ??? not mentioned in data book */
u32 Timer_addr : 5;
u32 reserved : 3;
u32 pcmcia_a_mod_pwr_n : 1;
u32 pcmcia_b_mod_pwr_n : 1;
u32 config_Done_stat : 1;
u32 config_Init_stat : 1;
u32 config_Prog_n : 1;
u32 config_wr_n : 1;
u32 config_cs_n : 1;
u32 config_cclk : 1;
u32 pi_CiMax_IRQ_n : 1;
u32 pi_timeout_status : 1;
u32 pi_wait_n : 1;
u32 pi_busy_n : 1;
} pi_608;
struct {
u32 PID :13;
u32 key_enable : 1;
#define fc_key_code_default 0x1
#define fc_key_code_even 0x2
#define fc_key_code_odd 0x3
u32 key_code : 2;
u32 key_array_col : 3;
u32 key_array_row : 5;
u32 dvb_en : 1; /* 0=TS bypasses the Descrambler */
u32 rw_flag : 1;
u32 reserved : 6;
} dvb_reg_60c;
/* SRAM and Output Destination 0x700 to 0x714 */
struct {
u32 sram_addr :15;
u32 sram_rw : 1; /* 0=write, 1=read */
u32 sram_data : 8;
u32 sc_xfer_bit : 1;
u32 reserved1 : 3;
u32 oe_pin_reg : 1;
u32 ce_pin_reg : 1;
u32 reserved2 : 1;
u32 start_sram_ibi : 1;
} sram_ctrl_reg_700;
struct {
u32 net_addr_read :16;
u32 net_addr_write :16;
} net_buf_reg_704;
struct {
u32 cai_read :11;
u32 reserved1 : 5;
u32 cai_write :11;
u32 reserved2 : 6;
u32 cai_cnt : 4;
} cai_buf_reg_708;
struct {
u32 cao_read :11;
u32 reserved1 : 5;
u32 cap_write :11;
u32 reserved2 : 6;
u32 cao_cnt : 4;
} cao_buf_reg_70c;
struct {
u32 media_read :11;
u32 reserved1 : 5;
u32 media_write :11;
u32 reserved2 : 6;
u32 media_cnt : 4;
} media_buf_reg_710;
struct {
u32 NET_Dest : 2;
u32 CAI_Dest : 2;
u32 CAO_Dest : 2;
u32 MEDIA_Dest : 2;
u32 net_ovflow_error : 1;
u32 media_ovflow_error : 1;
u32 cai_ovflow_error : 1;
u32 cao_ovflow_error : 1;
u32 ctrl_usb_wan : 1;
u32 ctrl_sramdma : 1;
u32 ctrl_maximumfill : 1;
u32 reserved :17;
} sram_dest_reg_714;
struct {
u32 net_cnt :12;
u32 reserved1 : 4;
u32 net_addr_read : 1;
u32 reserved2 : 3;
u32 net_addr_write : 1;
u32 reserved3 :11;
} net_buf_reg_718;
struct {
u32 wan_speed_sig : 2;
u32 reserved1 : 6;
u32 wan_wait_state : 8;
u32 sram_chip : 2;
u32 sram_memmap : 2;
u32 reserved2 : 4;
u32 wan_pkt_frame : 4;
u32 reserved3 : 4;
} wan_ctrl_reg_71c;
} flexcop_ibi_value;
extern flexcop_ibi_value ibi_zero;
typedef enum {
FC_I2C_PORT_DEMOD = 1,
FC_I2C_PORT_EEPROM = 2,
FC_I2C_PORT_TUNER = 3,
} flexcop_i2c_port_t;
typedef enum {
FC_WRITE = 0,
FC_READ = 1,
} flexcop_access_op_t;
typedef enum {
FC_SRAM_DEST_NET = 1,
FC_SRAM_DEST_CAI = 2,
FC_SRAM_DEST_CAO = 4,
FC_SRAM_DEST_MEDIA = 8
} flexcop_sram_dest_t;
typedef enum {
FC_SRAM_DEST_TARGET_WAN_USB = 0,
FC_SRAM_DEST_TARGET_DMA1 = 1,
FC_SRAM_DEST_TARGET_DMA2 = 2,
FC_SRAM_DEST_TARGET_FC3_CA = 3
} flexcop_sram_dest_target_t;
typedef enum {
FC_SRAM_2_32KB = 0, /* 64KB */
FC_SRAM_1_32KB = 1, /* 32KB - default fow FCII */
FC_SRAM_1_128KB = 2, /* 128KB */
FC_SRAM_1_48KB = 3, /* 48KB - default for FCIII */
} flexcop_sram_type_t;
typedef enum {
FC_WAN_SPEED_4MBITS = 0,
FC_WAN_SPEED_8MBITS = 1,
FC_WAN_SPEED_12MBITS = 2,
FC_WAN_SPEED_16MBITS = 3,
} flexcop_wan_speed_t;
typedef enum {
FC_DMA_1 = 1,
FC_DMA_2 = 2,
} flexcop_dma_index_t;
typedef enum {
FC_DMA_SUBADDR_0 = 1,
FC_DMA_SUBADDR_1 = 2,
} flexcop_dma_addr_index_t;
/* names of the particular registers */
typedef enum {
dma1_000 = 0x000,
dma1_004 = 0x004,
dma1_008 = 0x008,
dma1_00c = 0x00c,
dma2_010 = 0x010,
dma2_014 = 0x014,
dma2_018 = 0x018,
dma2_01c = 0x01c,
tw_sm_c_100 = 0x100,
tw_sm_c_104 = 0x104,
tw_sm_c_108 = 0x108,
tw_sm_c_10c = 0x10c,
tw_sm_c_110 = 0x110,
lnb_switch_freq_200 = 0x200,
misc_204 = 0x204,
ctrl_208 = 0x208,
irq_20c = 0x20c,
sw_reset_210 = 0x210,
misc_214 = 0x214,
mbox_v8_to_host_218 = 0x218,
mbox_host_to_v8_21c = 0x21c,
pid_filter_300 = 0x300,
pid_filter_304 = 0x304,
pid_filter_308 = 0x308,
pid_filter_30c = 0x30c,
index_reg_310 = 0x310,
pid_n_reg_314 = 0x314,
mac_low_reg_318 = 0x318,
mac_high_reg_31c = 0x31c,
data_tag_400 = 0x400,
card_id_408 = 0x408,
card_id_40c = 0x40c,
mac_address_418 = 0x418,
mac_address_41c = 0x41c,
ci_600 = 0x600,
pi_604 = 0x604,
pi_608 = 0x608,
dvb_reg_60c = 0x60c,
sram_ctrl_reg_700 = 0x700,
net_buf_reg_704 = 0x704,
cai_buf_reg_708 = 0x708,
cao_buf_reg_70c = 0x70c,
media_buf_reg_710 = 0x710,
sram_dest_reg_714 = 0x714,
net_buf_reg_718 = 0x718,
wan_ctrl_reg_71c = 0x71c,
} flexcop_ibi_register;
#define flexcop_set_ibi_value(reg,attr,val) \
flexcop_ibi_value v = fc->read_ibi_reg(fc,reg); \
v.reg.attr = val; \
fc->write_ibi_reg(fc,reg,v); \
#endif
drivers/media/dvb/b2c2/flexcop-sram.c 0 → 100644
View file @ 2add87a9
/*
* This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III
*
* flexcop-sram.c - functions for controlling the SRAM.
*
* see flexcop.c for copyright information.
*/
#include "flexcop.h"
static void flexcop_sram_set_chip (struct flexcop_device *fc, flexcop_sram_type_t type)
{
flexcop_set_ibi_value(wan_ctrl_reg_71c,sram_chip,type);
}
int flexcop_sram_init(struct flexcop_device *fc)
{
switch (fc->rev) {
case FLEXCOP_II:
case FLEXCOP_IIB:
flexcop_sram_set_chip(fc,FC_SRAM_1_32KB);
break;
case FLEXCOP_III:
flexcop_sram_set_chip(fc,FC_SRAM_1_48KB);
break;
default:
return -EINVAL;
}
return 0;
}
int flexcop_sram_set_dest(struct flexcop_device *fc, flexcop_sram_dest_t dest, flexcop_sram_dest_target_t target)
{
flexcop_ibi_value v;
v = fc->read_ibi_reg(fc,sram_dest_reg_714);
if (fc->rev != FLEXCOP_III && target == FC_SRAM_DEST_TARGET_FC3_CA) {
err("SRAM destination target to available on FlexCopII(b)\n");
return -EINVAL;
}
deb_sram("sram dest: %x target: %x\n",dest, target);
if (dest & FC_SRAM_DEST_NET)
v.sram_dest_reg_714.NET_Dest = target;
if (dest & FC_SRAM_DEST_CAI)
v.sram_dest_reg_714.CAI_Dest = target;
if (dest & FC_SRAM_DEST_CAO)
v.sram_dest_reg_714.CAO_Dest = target;
if (dest & FC_SRAM_DEST_MEDIA)
v.sram_dest_reg_714.MEDIA_Dest = target;
fc->write_ibi_reg(fc,sram_dest_reg_714,v);
udelay(1000); /* TODO delay really necessary */
return 0;
}
EXPORT_SYMBOL(flexcop_sram_set_dest);
void flexcop_wan_set_speed(struct flexcop_device *fc, flexcop_wan_speed_t s)
{
flexcop_set_ibi_value(wan_ctrl_reg_71c,wan_speed_sig,s);
}
EXPORT_SYMBOL(flexcop_wan_set_speed);
void flexcop_sram_ctrl(struct flexcop_device *fc, int usb_wan, int sramdma, int maximumfill)
{
flexcop_ibi_value v = fc->read_ibi_reg(fc,sram_dest_reg_714);
v.sram_dest_reg_714.ctrl_usb_wan = usb_wan;
v.sram_dest_reg_714.ctrl_sramdma = sramdma;
v.sram_dest_reg_714.ctrl_maximumfill = maximumfill;
fc->write_ibi_reg(fc,sram_dest_reg_714,v);
}
EXPORT_SYMBOL(flexcop_sram_ctrl);
#if 0
static void flexcop_sram_write(struct adapter *adapter, u32 bank, u32 addr, u8 *buf, u32 len)
{
int i, retries;
u32 command;
for (i = 0; i < len; i++) {
command = bank | addr | 0x04000000 | (*buf << 0x10);
retries = 2;
while (((read_reg_dw(adapter, 0x700) & 0x80000000) != 0) && (retries > 0)) {
mdelay(1);
retries--;
};
if (retries == 0)
printk("%s: SRAM timeout\n", __FUNCTION__);
write_reg_dw(adapter, 0x700, command);
buf++;
addr++;
}
}
static void flex_sram_read(struct adapter *adapter, u32 bank, u32 addr, u8 *buf, u32 len)
{
int i, retries;
u32 command, value;
for (i = 0; i < len; i++) {
command = bank | addr | 0x04008000;
retries = 10000;
while (((read_reg_dw(adapter, 0x700) & 0x80000000) != 0) && (retries > 0)) {
mdelay(1);
retries--;
};
if (retries == 0)
printk("%s: SRAM timeout\n", __FUNCTION__);
write_reg_dw(adapter, 0x700, command);
retries = 10000;
while (((read_reg_dw(adapter, 0x700) & 0x80000000) != 0) && (retries > 0)) {
mdelay(1);
retries--;
};
if (retries == 0)
printk("%s: SRAM timeout\n", __FUNCTION__);
value = read_reg_dw(adapter, 0x700) >> 0x10;
*buf = (value & 0xff);
addr++;
buf++;
}
}
static void sram_write_chunk(struct adapter *adapter, u32 addr, u8 *buf, u16 len)
{
u32 bank;
bank = 0;
if (adapter->dw_sram_type == 0x20000) {
bank = (addr & 0x18000) << 0x0d;
}
if (adapter->dw_sram_type == 0x00000) {
if ((addr >> 0x0f) == 0)
bank = 0x20000000;
else
bank = 0x10000000;
}
flex_sram_write(adapter, bank, addr & 0x7fff, buf, len);
}
static void sram_read_chunk(struct adapter *adapter, u32 addr, u8 *buf, u16 len)
{
u32 bank;
bank = 0;
if (adapter->dw_sram_type == 0x20000) {
bank = (addr & 0x18000) << 0x0d;
}
if (adapter->dw_sram_type == 0x00000) {
if ((addr >> 0x0f) == 0)
bank = 0x20000000;
else
bank = 0x10000000;
}
flex_sram_read(adapter, bank, addr & 0x7fff, buf, len);
}
static void sram_read(struct adapter *adapter, u32 addr, u8 *buf, u32 len)
{
u32 length;
while (len != 0) {
length = len;
// check if the address range belongs to the same
// 32K memory chip. If not, the data is read from
// one chip at a time.
if ((addr >> 0x0f) != ((addr + len - 1) >> 0x0f)) {
length = (((addr >> 0x0f) + 1) << 0x0f) - addr;
}
sram_read_chunk(adapter, addr, buf, length);
addr = addr + length;
buf = buf + length;
len = len - length;
}
}
static void sram_write(struct adapter *adapter, u32 addr, u8 *buf, u32 len)
{
u32 length;
while (len != 0) {
length = len;
// check if the address range belongs to the same
// 32K memory chip. If not, the data is written to
// one chip at a time.
if ((addr >> 0x0f) != ((addr + len - 1) >> 0x0f)) {
length = (((addr >> 0x0f) + 1) << 0x0f) - addr;
}
sram_write_chunk(adapter, addr, buf, length);
addr = addr + length;
buf = buf + length;
len = len - length;
}
}
static void sram_set_size(struct adapter *adapter, u32 mask)
{
write_reg_dw(adapter, 0x71c, (mask | (~0x30000 & read_reg_dw(adapter, 0x71c))));
}
static void sram_init(struct adapter *adapter)
{
u32 tmp;
tmp = read_reg_dw(adapter, 0x71c);
write_reg_dw(adapter, 0x71c, 1);
if (read_reg_dw(adapter, 0x71c) != 0) {
write_reg_dw(adapter, 0x71c, tmp);
adapter->dw_sram_type = tmp & 0x30000;
ddprintk("%s: dw_sram_type = %x\n", __FUNCTION__, adapter->dw_sram_type);
} else {
adapter->dw_sram_type = 0x10000;
ddprintk("%s: dw_sram_type = %x\n", __FUNCTION__, adapter->dw_sram_type);
}
/* return value is never used? */
/* return adapter->dw_sram_type; */
}
static int sram_test_location(struct adapter *adapter, u32 mask, u32 addr)
{
u8 tmp1, tmp2;
dprintk("%s: mask = %x, addr = %x\n", __FUNCTION__, mask, addr);
sram_set_size(adapter, mask);
sram_init(adapter);
tmp2 = 0xa5;
tmp1 = 0x4f;
sram_write(adapter, addr, &tmp2, 1);
sram_write(adapter, addr + 4, &tmp1, 1);
tmp2 = 0;
mdelay(20);
sram_read(adapter, addr, &tmp2, 1);
sram_read(adapter, addr, &tmp2, 1);
dprintk("%s: wrote 0xa5, read 0x%2x\n", __FUNCTION__, tmp2);
if (tmp2 != 0xa5)
return 0;
tmp2 = 0x5a;
tmp1 = 0xf4;
sram_write(adapter, addr, &tmp2, 1);
sram_write(adapter, addr + 4, &tmp1, 1);
tmp2 = 0;
mdelay(20);
sram_read(adapter, addr, &tmp2, 1);
sram_read(adapter, addr, &tmp2, 1);
dprintk("%s: wrote 0x5a, read 0x%2x\n", __FUNCTION__, tmp2);
if (tmp2 != 0x5a)
return 0;
return 1;
}
static u32 sram_length(struct adapter *adapter)
{
if (adapter->dw_sram_type == 0x10000)
return 32768; // 32K
if (adapter->dw_sram_type == 0x00000)
return 65536; // 64K
if (adapter->dw_sram_type == 0x20000)
return 131072; // 128K
return 32768; // 32K
}
/* FlexcopII can work with 32K, 64K or 128K of external SRAM memory.
- for 128K there are 4x32K chips at bank 0,1,2,3.
- for 64K there are 2x32K chips at bank 1,2.
- for 32K there is one 32K chip at bank 0.
FlexCop works only with one bank at a time. The bank is selected
by bits 28-29 of the 0x700 register.
bank 0 covers addresses 0x00000-0x07fff
bank 1 covers addresses 0x08000-0x0ffff
bank 2 covers addresses 0x10000-0x17fff
bank 3 covers addresses 0x18000-0x1ffff
*/
static int flexcop_sram_detect(struct flexcop_device *fc)
{
flexcop_ibi_value r208,r71c_0,vr71c_1;
r208 = fc->read_ibi_reg(fc, ctrl_208);
fc->write_ibi_reg(fc, ctrl_208, ibi_zero);
r71c_0 = fc->read_ibi_reg(fc, wan_ctrl_reg_71c);
write_reg_dw(adapter, 0x71c, 1);
tmp3 = read_reg_dw(adapter, 0x71c);
dprintk("%s: tmp3 = %x\n", __FUNCTION__, tmp3);
write_reg_dw(adapter, 0x71c, tmp2);
// check for internal SRAM ???
tmp3--;
if (tmp3 != 0) {
sram_set_size(adapter, 0x10000);
sram_init(adapter);
write_reg_dw(adapter, 0x208, tmp);
dprintk("%s: sram size = 32K\n", __FUNCTION__);
return 32;
}
if (sram_test_location(adapter, 0x20000, 0x18000) != 0) {
sram_set_size(adapter, 0x20000);
sram_init(adapter);
write_reg_dw(adapter, 0x208, tmp);
dprintk("%s: sram size = 128K\n", __FUNCTION__);
return 128;
}
if (sram_test_location(adapter, 0x00000, 0x10000) != 0) {
sram_set_size(adapter, 0x00000);
sram_init(adapter);
write_reg_dw(adapter, 0x208, tmp);
dprintk("%s: sram size = 64K\n", __FUNCTION__);
return 64;
}
if (sram_test_location(adapter, 0x10000, 0x00000) != 0) {
sram_set_size(adapter, 0x10000);
sram_init(adapter);
write_reg_dw(adapter, 0x208, tmp);
dprintk("%s: sram size = 32K\n", __FUNCTION__);
return 32;
}
sram_set_size(adapter, 0x10000);
sram_init(adapter);
write_reg_dw(adapter, 0x208, tmp);
dprintk("%s: SRAM detection failed. Set to 32K \n", __FUNCTION__);
return 0;
}
static void sll_detect_sram_size(struct adapter *adapter)
{
sram_detect_for_flex2(adapter);
}
#endif
drivers/media/dvb/b2c2/flexcop-usb.c 0 → 100644
View file @ 2add87a9
/*
* This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III
*
* flexcop-usb.c - covers the USB part.
*
* see flexcop.c for copyright information.
*/
#define FC_LOG_PREFIX "flexcop_usb"
#include "flexcop-usb.h"
#include "flexcop-common.h"
/* Version information */
#define DRIVER_VERSION "0.1"
#define DRIVER_NAME "Technisat/B2C2 FlexCop II/IIb/III Digital TV USB Driver"
#define DRIVER_AUTHOR "Patrick Boettcher <patrick.boettcher@desy.de>"
/* debug */
#ifdef CONFIG_DVB_B2C2_FLEXCOP_DEBUG
#define dprintk(level,args...) \
do { if ((debug & level)) { printk(args); } } while (0)
#define debug_dump(b,l,method) {\
int i; \
for (i = 0; i < l; i++) method("%02x ", b[i]); \
method("\n");\
}
#define DEBSTATUS ""
#else
#define dprintk(level,args...)
#define debug_dump(b,l,method)
#define DEBSTATUS " (debugging is not enabled)"
#endif
static int debug;
module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "set debugging level (1=info,ts=2,ctrl=4,i2c=8,v8mem=16 (or-able))." DEBSTATUS);
#undef DEBSTATUS
#define deb_info(args...) dprintk(0x01,args)
#define deb_ts(args...) dprintk(0x02,args)
#define deb_ctrl(args...) dprintk(0x04,args)
#define deb_i2c(args...) dprintk(0x08,args)
#define deb_v8(args...) dprintk(0x10,args)
/* JLP 111700: we will include the 1 bit gap between the upper and lower 3 bits
* in the IBI address, to make the V8 code simpler.
* PCI ADDRESS FORMAT: 0x71C -> 0000 0111 0001 1100 (these are the six bits used)
* in general: 0000 0HHH 000L LL00
* IBI ADDRESS FORMAT: RHHH BLLL
*
* where R is the read(1)/write(0) bit, B is the busy bit
* and HHH and LLL are the two sets of three bits from the PCI address.
*/
#define B2C2_FLEX_PCIOFFSET_TO_INTERNALADDR(usPCI) (u8) (((usPCI >> 2) & 0x07) + ((usPCI >> 4) & 0x70))
#define B2C2_FLEX_INTERNALADDR_TO_PCIOFFSET(ucAddr) (u16) (((ucAddr & 0x07) << 2) + ((ucAddr & 0x70) << 4))
/*
* DKT 020228
* - forget about this VENDOR_BUFFER_SIZE, read and write register
* deal with DWORD or 4 bytes, that should be should from now on
* - from now on, we don't support anything older than firm 1.00
* I eliminated the write register as a 2 trip of writing hi word and lo word
* and force this to write only 4 bytes at a time.
* NOTE: this should work with all the firmware from 1.00 and newer
*/
static int flexcop_usb_readwrite_dw(struct flexcop_device *fc, u16 wRegOffsPCI, u32 *val, u8 read)
{
struct flexcop_usb *fc_usb = fc->bus_specific;
u8 request = read ? B2C2_USB_READ_REG : B2C2_USB_WRITE_REG;
u8 request_type = (read ? USB_DIR_IN : USB_DIR_OUT) | USB_TYPE_VENDOR;
u8 wAddress = B2C2_FLEX_PCIOFFSET_TO_INTERNALADDR(wRegOffsPCI) | (read ? 0x80 : 0);
int len = usb_control_msg(fc_usb->udev,
read ? B2C2_USB_CTRL_PIPE_IN : B2C2_USB_CTRL_PIPE_OUT,
request,
request_type, /* 0xc0 read or 0x40 write*/
wAddress,
0,
val,
sizeof(u32),
B2C2_WAIT_FOR_OPERATION_RDW * HZ);
if (len != sizeof(u32)) {
err("error while %s dword from %d (%d).",read ? "reading" : "writing",
wAddress,wRegOffsPCI);
return -EIO;
}
return 0;
}
/*
* DKT 010817 - add support for V8 memory read/write and flash update
*/
static int flexcop_usb_v8_memory_req(struct flexcop_usb *fc_usb,
flexcop_usb_request_t req, u8 page, u16 wAddress,
u8 *pbBuffer,u32 buflen)
{
// u8 dwRequestType;
u8 request_type = USB_TYPE_VENDOR;
u16 wIndex;
int nWaitTime,pipe,len;
wIndex = page << 8;
switch (req) {
case B2C2_USB_READ_V8_MEM:
nWaitTime = B2C2_WAIT_FOR_OPERATION_V8READ;
request_type |= USB_DIR_IN;
// dwRequestType = (u8) RTYPE_READ_V8_MEMORY;
pipe = B2C2_USB_CTRL_PIPE_IN;
break;
case B2C2_USB_WRITE_V8_MEM:
wIndex |= pbBuffer[0];
request_type |= USB_DIR_OUT;
nWaitTime = B2C2_WAIT_FOR_OPERATION_V8WRITE;
// dwRequestType = (u8) RTYPE_WRITE_V8_MEMORY;
pipe = B2C2_USB_CTRL_PIPE_OUT;
break;
case B2C2_USB_FLASH_BLOCK:
request_type |= USB_DIR_OUT;
nWaitTime = B2C2_WAIT_FOR_OPERATION_V8FLASH;
// dwRequestType = (u8) RTYPE_WRITE_V8_FLASH;
pipe = B2C2_USB_CTRL_PIPE_OUT;
break;
default:
deb_info("unsupported request for v8_mem_req %x.\n",req);
return -EINVAL;
}
deb_v8("v8mem: %02x %02x %04x %04x, len: %d\n",request_type,req,
wAddress,wIndex,buflen);
len = usb_control_msg(fc_usb->udev,pipe,
req,
request_type,
wAddress,
wIndex,
pbBuffer,
buflen,
nWaitTime * HZ);
debug_dump(pbBuffer,len,deb_v8);
return len == buflen ? 0 : -EIO;
}
#define bytes_left_to_read_on_page(paddr,buflen) \
((V8_MEMORY_PAGE_SIZE - (paddr & V8_MEMORY_PAGE_MASK)) > buflen \
? buflen : (V8_MEMORY_PAGE_SIZE - (paddr & V8_MEMORY_PAGE_MASK)))
static int flexcop_usb_memory_req(struct flexcop_usb *fc_usb,flexcop_usb_request_t req,
flexcop_usb_mem_page_t page_start, u32 addr, int extended, u8 *buf, u32 len)
{
int i,ret = 0;
u16 wMax;
u32 pagechunk = 0;
switch(req) {
case B2C2_USB_READ_V8_MEM: wMax = USB_MEM_READ_MAX; break;
case B2C2_USB_WRITE_V8_MEM: wMax = USB_MEM_WRITE_MAX; break;
case B2C2_USB_FLASH_BLOCK: wMax = USB_FLASH_MAX; break;
default:
return -EINVAL;
break;
}
for (i = 0; i < len;) {
pagechunk = wMax < bytes_left_to_read_on_page(addr,len) ? wMax : bytes_left_to_read_on_page(addr,len);
deb_info("%x\n",(addr & V8_MEMORY_PAGE_MASK) | (V8_MEMORY_EXTENDED*extended));
if ((ret = flexcop_usb_v8_memory_req(fc_usb,req,
page_start + (addr / V8_MEMORY_PAGE_SIZE), /* actual page */
(addr & V8_MEMORY_PAGE_MASK) | (V8_MEMORY_EXTENDED*extended),
&buf[i],pagechunk)) < 0)
return ret;
addr += pagechunk;
len -= pagechunk;
}
return 0;
}
static int flexcop_usb_get_mac_addr(struct flexcop_device *fc, int extended)
{
return flexcop_usb_memory_req(fc->bus_specific,B2C2_USB_READ_V8_MEM,V8_MEMORY_PAGE_FLASH,0x1f010,1,fc->mac_address,6);
}
#if 0
static int flexcop_usb_utility_req(struct flexcop_usb *fc_usb, int set,
flexcop_usb_utility_function_t func, u8 extra, u16 wIndex,
u16 buflen, u8 *pvBuffer)
{
u16 wValue;
u8 request_type = (set ? USB_DIR_OUT : USB_DIR_IN) | USB_TYPE_VENDOR;
// u8 dwRequestType = (u8) RTYPE_GENERIC,
int nWaitTime = 2,
pipe = set ? B2C2_USB_CTRL_PIPE_OUT : B2C2_USB_CTRL_PIPE_IN,
len;
wValue = (func << 8) | extra;
len = usb_control_msg(fc_usb->udev,pipe,
B2C2_USB_UTILITY,
request_type,
wValue,
wIndex,
pvBuffer,
buflen,
nWaitTime * HZ);
return len == buflen ? 0 : -EIO;
}
#endif
/* usb i2c stuff */
static int flexcop_usb_i2c_req(struct flexcop_usb *fc_usb,
flexcop_usb_request_t req, flexcop_usb_i2c_function_t func,
flexcop_i2c_port_t port, u8 chipaddr, u8 addr, u8 *buf, u8 buflen)
{
u16 wValue, wIndex;
int nWaitTime,pipe,len;
// u8 dwRequestType;
u8 request_type = USB_TYPE_VENDOR;
switch (func) {
case USB_FUNC_I2C_WRITE:
case USB_FUNC_I2C_MULTIWRITE:
case USB_FUNC_I2C_REPEATWRITE:
/* DKT 020208 - add this to support special case of DiSEqC */
case USB_FUNC_I2C_CHECKWRITE:
pipe = B2C2_USB_CTRL_PIPE_OUT;
nWaitTime = 2;
// dwRequestType = (u8) RTYPE_GENERIC;
request_type |= USB_DIR_OUT;
break;
case USB_FUNC_I2C_READ:
case USB_FUNC_I2C_REPEATREAD:
pipe = B2C2_USB_CTRL_PIPE_IN;
nWaitTime = 2;
// dwRequestType = (u8) RTYPE_GENERIC;
request_type |= USB_DIR_IN;
break;
default:
deb_info("unsupported function for i2c_req %x\n",func);
return -EINVAL;
}
wValue = (func << 8 ) | (port << 4);
wIndex = (chipaddr << 8 ) | addr;
deb_i2c("i2c %2d: %02x %02x %02x %02x %02x %02x\n",func,request_type,req,
((wValue && 0xff) << 8),wValue >> 8,((wIndex && 0xff) << 8),wIndex >> 8);
len = usb_control_msg(fc_usb->udev,pipe,
req,
request_type,
wValue,
wIndex,
buf,
buflen,
nWaitTime * HZ);
return len == buflen ? 0 : -EREMOTEIO;
}
/* actual bus specific access functions, make sure prototype are/will be equal to pci */
static flexcop_ibi_value flexcop_usb_read_ibi_reg(struct flexcop_device *fc, flexcop_ibi_register reg)
{
flexcop_ibi_value val;
val.raw = 0;
flexcop_usb_readwrite_dw(fc,reg, &val.raw, 1);
return val;
}
static int flexcop_usb_write_ibi_reg(struct flexcop_device *fc, flexcop_ibi_register reg, flexcop_ibi_value val)
{
return flexcop_usb_readwrite_dw(fc,reg, &val.raw, 0);
}
static int flexcop_usb_i2c_request(struct flexcop_device *fc, flexcop_access_op_t op,
flexcop_i2c_port_t port, u8 chipaddr, u8 addr, u8 *buf, u16 len)
{
if (op == FC_READ)
return flexcop_usb_i2c_req(fc->bus_specific,B2C2_USB_I2C_REQUEST,USB_FUNC_I2C_READ,port,chipaddr,addr,buf,len);
else
return flexcop_usb_i2c_req(fc->bus_specific,B2C2_USB_I2C_REQUEST,USB_FUNC_I2C_WRITE,port,chipaddr,addr,buf,len);
}
static void flexcop_usb_urb_complete(struct urb *urb, struct pt_regs *ptregs)
{
struct flexcop_usb *fc_usb = urb->context;
int i;
if (urb->actual_length > 0)
deb_ts("urb completed, bufsize: %d actlen; %d\n",urb->transfer_buffer_length, urb->actual_length);
for (i = 0; i < urb->number_of_packets; i++) {
if (urb->iso_frame_desc[i].status < 0) {
err("iso frame descriptor %d has an error: %d\n",i,urb->iso_frame_desc[i].status);
} else
if (urb->iso_frame_desc[i].actual_length > 0) {
deb_ts("passed %d bytes to the demux\n",urb->iso_frame_desc[i].actual_length);
flexcop_pass_dmx_data(fc_usb->fc_dev,
urb->transfer_buffer + urb->iso_frame_desc[i].offset,
urb->iso_frame_desc[i].actual_length);
}
urb->iso_frame_desc[i].status = 0;
urb->iso_frame_desc[i].actual_length = 0;
}
usb_submit_urb(urb,GFP_ATOMIC);
}
static int flexcop_usb_stream_control(struct flexcop_device *fc, int onoff)
{
/* submit/kill iso packets */
return 0;
}
static void flexcop_usb_transfer_exit(struct flexcop_usb *fc_usb)
{
int i;
for (i = 0; i < B2C2_USB_NUM_ISO_URB; i++)
if (fc_usb->iso_urb[i] != NULL) {
deb_ts("unlinking/killing urb no. %d\n",i);
usb_kill_urb(fc_usb->iso_urb[i]);
usb_free_urb(fc_usb->iso_urb[i]);
}
if (fc_usb->iso_buffer != NULL)
pci_free_consistent(NULL,fc_usb->buffer_size, fc_usb->iso_buffer, fc_usb->dma_addr);
}
static int flexcop_usb_transfer_init(struct flexcop_usb *fc_usb)
{
u16 frame_size = fc_usb->uintf->cur_altsetting->endpoint[0].desc.wMaxPacketSize;
int bufsize = B2C2_USB_NUM_ISO_URB * B2C2_USB_FRAMES_PER_ISO * frame_size,i,j,ret;
int buffer_offset = 0;
deb_ts("creating %d iso-urbs with %d frames each of %d bytes size = %d.\n",
B2C2_USB_NUM_ISO_URB, B2C2_USB_FRAMES_PER_ISO, frame_size,bufsize);
fc_usb->iso_buffer = pci_alloc_consistent(NULL,bufsize,&fc_usb->dma_addr);
if (fc_usb->iso_buffer == NULL)
return -ENOMEM;
memset(fc_usb->iso_buffer, 0, bufsize);
fc_usb->buffer_size = bufsize;
/* creating iso urbs */
for (i = 0; i < B2C2_USB_NUM_ISO_URB; i++)
if (!(fc_usb->iso_urb[i] = usb_alloc_urb(B2C2_USB_FRAMES_PER_ISO,GFP_ATOMIC))) {
ret = -ENOMEM;
goto urb_error;
}
/* initialising and submitting iso urbs */
for (i = 0; i < B2C2_USB_NUM_ISO_URB; i++) {
int frame_offset = 0;
struct urb *urb = fc_usb->iso_urb[i];
deb_ts("initializing and submitting urb no. %d (buf_offset: %d).\n",i,buffer_offset);
urb->dev = fc_usb->udev;
urb->context = fc_usb;
urb->complete = flexcop_usb_urb_complete;
urb->pipe = B2C2_USB_DATA_PIPE;
urb->transfer_flags = URB_ISO_ASAP;
urb->interval = 1;
urb->number_of_packets = B2C2_USB_FRAMES_PER_ISO;
urb->transfer_buffer_length = frame_size * B2C2_USB_FRAMES_PER_ISO;
urb->transfer_buffer = fc_usb->iso_buffer + buffer_offset;
buffer_offset += frame_size * B2C2_USB_FRAMES_PER_ISO;
for (j = 0; j < B2C2_USB_FRAMES_PER_ISO; j++) {
deb_ts("urb no: %d, frame: %d, frame_offset: %d\n",i,j,frame_offset);
urb->iso_frame_desc[j].offset = frame_offset;
urb->iso_frame_desc[j].length = frame_size;
frame_offset += frame_size;
}
if ((ret = usb_submit_urb(fc_usb->iso_urb[i],GFP_ATOMIC))) {
err("submitting urb %d failed with %d.",i,ret);
goto urb_error;
}
deb_ts("submitted urb no. %d.\n",i);
}
/* SRAM */
flexcop_sram_set_dest(fc_usb->fc_dev,FC_SRAM_DEST_MEDIA | FC_SRAM_DEST_NET |
FC_SRAM_DEST_CAO | FC_SRAM_DEST_CAI, FC_SRAM_DEST_TARGET_WAN_USB);
flexcop_wan_set_speed(fc_usb->fc_dev,FC_WAN_SPEED_8MBITS);
flexcop_sram_ctrl(fc_usb->fc_dev,1,1,1);
ret = 0;
goto success;
urb_error:
flexcop_usb_transfer_exit(fc_usb);
success:
return ret;
}
static int flexcop_usb_init(struct flexcop_usb *fc_usb)
{
/* use the alternate setting with the larges buffer */
usb_set_interface(fc_usb->udev,0,1);
switch (fc_usb->udev->speed) {
case USB_SPEED_LOW:
err("cannot handle USB speed because it is to sLOW.");
return -ENODEV;
break;
case USB_SPEED_FULL:
info("running at FULL speed.");
break;
case USB_SPEED_HIGH:
info("running at HIGH speed.");
break;
case USB_SPEED_UNKNOWN: /* fall through */
default:
err("cannot handle USB speed because it is unkown.");
return -ENODEV;
}
usb_set_intfdata(fc_usb->uintf, fc_usb);
return 0;
}
static void flexcop_usb_exit(struct flexcop_usb *fc_usb)
{
usb_set_intfdata(fc_usb->uintf, NULL);
}
static int flexcop_usb_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
struct usb_device *udev = interface_to_usbdev(intf);
struct flexcop_usb *fc_usb = NULL;
struct flexcop_device *fc = NULL;
int ret;
if ((fc = flexcop_device_kmalloc(sizeof(struct flexcop_usb))) == NULL) {
err("out of memory\n");
return -ENOMEM;
}
/* general flexcop init */
fc_usb = fc->bus_specific;
fc_usb->fc_dev = fc;
fc->read_ibi_reg = flexcop_usb_read_ibi_reg;
fc->write_ibi_reg = flexcop_usb_write_ibi_reg;
fc->i2c_request = flexcop_usb_i2c_request;
fc->get_mac_addr = flexcop_usb_get_mac_addr;
fc->stream_control = flexcop_usb_stream_control;
fc->pid_filtering = 1;
fc->bus_type = FC_USB;
fc->dev = &udev->dev;
/* bus specific part */
fc_usb->udev = udev;
fc_usb->uintf = intf;
if ((ret = flexcop_usb_init(fc_usb)) != 0)
goto err_kfree;
/* init flexcop */
if ((ret = flexcop_device_initialize(fc)) != 0)
goto err_usb_exit;
/* xfer init */
if ((ret = flexcop_usb_transfer_init(fc_usb)) != 0)
goto err_fc_exit;
info("%s successfully initialized and connected.",DRIVER_NAME);
ret = 0;
goto success;
err_fc_exit:
flexcop_device_exit(fc);
err_usb_exit:
flexcop_usb_exit(fc_usb);
err_kfree:
flexcop_device_kfree(fc);
success:
return ret;
}
static void flexcop_usb_disconnect(struct usb_interface *intf)
{
struct flexcop_usb *fc_usb = usb_get_intfdata(intf);
flexcop_usb_transfer_exit(fc_usb);
flexcop_device_exit(fc_usb->fc_dev);
flexcop_usb_exit(fc_usb);
flexcop_device_kfree(fc_usb->fc_dev);
info("%s successfully deinitialized and disconnected.",DRIVER_NAME);
}
static struct usb_device_id flexcop_usb_table [] = {
{ USB_DEVICE(0x0af7, 0x0101) },
{ }
};
/* usb specific object needed to register this driver with the usb subsystem */
static struct usb_driver flexcop_usb_driver = {
.owner = THIS_MODULE,
.name = "Technisat/B2C2 FlexCop II/IIb/III USB",
.probe = flexcop_usb_probe,
.disconnect = flexcop_usb_disconnect,
.id_table = flexcop_usb_table,
};
/* module stuff */
static int __init flexcop_usb_module_init(void)
{
int result;
if ((result = usb_register(&flexcop_usb_driver))) {
err("usb_register failed. (%d)",result);
return result;
}
return 0;
}
static void __exit flexcop_usb_module_exit(void)
{
/* deregister this driver from the USB subsystem */
usb_deregister(&flexcop_usb_driver);
}
module_init(flexcop_usb_module_init);
module_exit(flexcop_usb_module_exit);
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_NAME);
MODULE_LICENSE("GPL");
drivers/media/dvb/b2c2/flexcop-usb.h 0 → 100644
View file @ 2add87a9
#ifndef __FLEXCOP_USB_H_INCLUDED__
#define __FLEXCOP_USB_H_INCLUDED__
#include <linux/usb.h>
/* transfer parameters */
#define B2C2_USB_FRAMES_PER_ISO 4
#define B2C2_USB_NUM_ISO_URB 4
#define B2C2_USB_CTRL_PIPE_IN usb_rcvctrlpipe(fc_usb->udev,0)
#define B2C2_USB_CTRL_PIPE_OUT usb_sndctrlpipe(fc_usb->udev,0)
#define B2C2_USB_DATA_PIPE usb_rcvisocpipe(fc_usb->udev,0x81)
struct flexcop_usb {
struct usb_device *udev;
struct usb_interface *uintf;
u8 *iso_buffer;
int buffer_size;
dma_addr_t dma_addr;
struct urb *iso_urb[B2C2_USB_NUM_ISO_URB];
struct flexcop_device *fc_dev;
};
#if 0
/* request types TODO What is its use?*/
typedef enum {
/* something is wrong with this part
RTYPE_READ_DW = (1 << 6),
RTYPE_WRITE_DW_1 = (3 << 6),
RTYPE_READ_V8_MEMORY = (6 << 6),
RTYPE_WRITE_V8_MEMORY = (7 << 6),
RTYPE_WRITE_V8_FLASH = (8 << 6),
RTYPE_GENERIC = (9 << 6),
*/
} flexcop_usb_request_type_t;
#endif
/* request */
typedef enum {
B2C2_USB_WRITE_V8_MEM = 0x04,
B2C2_USB_READ_V8_MEM = 0x05,
B2C2_USB_READ_REG = 0x08,
B2C2_USB_WRITE_REG = 0x0A,
/* B2C2_USB_WRITEREGLO = 0x0A, */
B2C2_USB_WRITEREGHI = 0x0B,
B2C2_USB_FLASH_BLOCK = 0x10,
B2C2_USB_I2C_REQUEST = 0x11,
B2C2_USB_UTILITY = 0x12,
} flexcop_usb_request_t;
/* function definition for I2C_REQUEST */
typedef enum {
USB_FUNC_I2C_WRITE = 0x01,
USB_FUNC_I2C_MULTIWRITE = 0x02,
USB_FUNC_I2C_READ = 0x03,
USB_FUNC_I2C_REPEATWRITE = 0x04,
USB_FUNC_GET_DESCRIPTOR = 0x05,
USB_FUNC_I2C_REPEATREAD = 0x06,
/* DKT 020208 - add this to support special case of DiSEqC */
USB_FUNC_I2C_CHECKWRITE = 0x07,
USB_FUNC_I2C_CHECKRESULT = 0x08,
} flexcop_usb_i2c_function_t;
/*
* function definition for UTILITY request 0x12
* DKT 020304 - new utility function
*/
typedef enum {
UTILITY_SET_FILTER = 0x01,
UTILITY_DATA_ENABLE = 0x02,
UTILITY_FLEX_MULTIWRITE = 0x03,
UTILITY_SET_BUFFER_SIZE = 0x04,
UTILITY_FLEX_OPERATOR = 0x05,
UTILITY_FLEX_RESET300_START = 0x06,
UTILITY_FLEX_RESET300_STOP = 0x07,
UTILITY_FLEX_RESET300 = 0x08,
UTILITY_SET_ISO_SIZE = 0x09,
UTILITY_DATA_RESET = 0x0A,
UTILITY_GET_DATA_STATUS = 0x10,
UTILITY_GET_V8_REG = 0x11,
/* DKT 020326 - add function for v1.14 */
UTILITY_SRAM_WRITE = 0x12,
UTILITY_SRAM_READ = 0x13,
UTILITY_SRAM_TESTFILL = 0x14,
UTILITY_SRAM_TESTSET = 0x15,
UTILITY_SRAM_TESTVERIFY = 0x16,
} flexcop_usb_utility_function_t;
#define B2C2_WAIT_FOR_OPERATION_RW 1*HZ /* 1 s */
#define B2C2_WAIT_FOR_OPERATION_RDW 3*HZ /* 3 s */
#define B2C2_WAIT_FOR_OPERATION_WDW 1*HZ /* 1 s */
#define B2C2_WAIT_FOR_OPERATION_V8READ 3*HZ /* 3 s */
#define B2C2_WAIT_FOR_OPERATION_V8WRITE 3*HZ /* 3 s */
#define B2C2_WAIT_FOR_OPERATION_V8FLASH 3*HZ /* 3 s */
typedef enum {
V8_MEMORY_PAGE_DVB_CI = 0x20,
V8_MEMORY_PAGE_DVB_DS = 0x40,
V8_MEMORY_PAGE_MULTI2 = 0x60,
V8_MEMORY_PAGE_FLASH = 0x80
} flexcop_usb_mem_page_t;
#define V8_MEMORY_EXTENDED (1 << 15)
#define USB_MEM_READ_MAX 32
#define USB_MEM_WRITE_MAX 1
#define USB_FLASH_MAX 8
#define V8_MEMORY_PAGE_SIZE 0x8000 // 32K
#define V8_MEMORY_PAGE_MASK 0x7FFF
#endif
drivers/media/dvb/b2c2/flexcop.c 0 → 100644
View file @ 2add87a9
/*
* flexcop.c - driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
*
* Copyright (C) 2004-5 Patrick Boettcher <patrick.boettcher@desy.de>
*
* based on the skystar2-driver
* Copyright (C) 2003 Vadim Catana, skystar@moldova.cc
*
* Acknowledgements:
* John Jurrius from BBTI, Inc. for extensive support with
* code examples and data books
*
* Bjarne Steinsbo, bjarne at steinsbo.com (some ideas for rewriting)
*
* Contributions to the skystar2-driver have been done by
* Vincenzo Di Massa, hawk.it at tiscalinet.it (several DiSEqC fixes)
* Roberto Ragusa, r.ragusa at libero.it (polishing, restyling the code)
* Niklas Peinecke, peinecke at gdv.uni-hannover.de (hardware pid/mac filtering)
*
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public License
* as published by the Free Software Foundation; either version 2.1
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
#include "flexcop.h"
#define DRIVER_NAME "B2C2 FlexcopII/II(b)/III digital TV receiver chip"
#define DRIVER_AUTHOR "Patrick Boettcher <patrick.boettcher@desy.de"
#ifdef CONFIG_DVB_B2C2_FLEXCOP_DEBUG
#define DEBSTATUS ""
#else
#define DEBSTATUS " (debugging is not enabled)"
#endif
int b2c2_flexcop_debug;
module_param_named(debug, b2c2_flexcop_debug, int, 0644);
MODULE_PARM_DESC(debug, "set debug level (1=info,2=tuner,4=i2c,8=ts,16=sram (|-able))." DEBSTATUS);
#undef DEBSTATUS
/* global zero for ibi values */
flexcop_ibi_value ibi_zero;
static int flexcop_dvb_start_feed(struct dvb_demux_feed *dvbdmxfeed)
{
struct flexcop_device *fc = dvbdmxfeed->demux->priv;
return flexcop_pid_feed_control(fc,dvbdmxfeed,1);
}
static int flexcop_dvb_stop_feed(struct dvb_demux_feed *dvbdmxfeed)
{
struct flexcop_device *fc = dvbdmxfeed->demux->priv;
return flexcop_pid_feed_control(fc,dvbdmxfeed,0);
}
static int flexcop_dvb_init(struct flexcop_device *fc)
{
int ret;
if ((ret = dvb_register_adapter(&fc->dvb_adapter,"FlexCop Digital TV device",THIS_MODULE)) < 0) {
err("error registering DVB adapter");
return ret;
}
fc->dvb_adapter.priv = fc;
fc->demux.dmx.capabilities = (DMX_TS_FILTERING | DMX_SECTION_FILTERING | DMX_MEMORY_BASED_FILTERING);
fc->demux.priv = fc;
fc->demux.filternum = fc->demux.feednum = FC_MAX_FEED;
fc->demux.start_feed = flexcop_dvb_start_feed;
fc->demux.stop_feed = flexcop_dvb_stop_feed;
fc->demux.write_to_decoder = NULL;
if ((ret = dvb_dmx_init(&fc->demux)) < 0) {
err("dvb_dmx failed: error %d",ret);
goto err_dmx;
}
fc->hw_frontend.source = DMX_FRONTEND_0;
fc->dmxdev.filternum = fc->demux.feednum;
fc->dmxdev.demux = &fc->demux.dmx;
fc->dmxdev.capabilities = 0;
if ((ret = dvb_dmxdev_init(&fc->dmxdev, &fc->dvb_adapter)) < 0) {
err("dvb_dmxdev_init failed: error %d",ret);
goto err_dmx_dev;
}
if ((ret = fc->demux.dmx.add_frontend(&fc->demux.dmx, &fc->hw_frontend)) < 0) {
err("adding hw_frontend to dmx failed: error %d",ret);
goto err_dmx_add_hw_frontend;
}
fc->mem_frontend.source = DMX_MEMORY_FE;
if ((ret = fc->demux.dmx.add_frontend(&fc->demux.dmx, &fc->mem_frontend)) < 0) {
err("adding mem_frontend to dmx failed: error %d",ret);
goto err_dmx_add_mem_frontend;
}
if ((ret = fc->demux.dmx.connect_frontend(&fc->demux.dmx, &fc->hw_frontend)) < 0) {
err("connect frontend failed: error %d",ret);
goto err_connect_frontend;
}
dvb_net_init(&fc->dvb_adapter, &fc->dvbnet, &fc->demux.dmx);
fc->init_state |= FC_STATE_DVB_INIT;
goto success;
err_connect_frontend:
fc->demux.dmx.remove_frontend(&fc->demux.dmx,&fc->mem_frontend);
err_dmx_add_mem_frontend:
fc->demux.dmx.remove_frontend(&fc->demux.dmx,&fc->hw_frontend);
err_dmx_add_hw_frontend:
dvb_dmxdev_release(&fc->dmxdev);
err_dmx_dev:
dvb_dmx_release(&fc->demux);
err_dmx:
dvb_unregister_adapter(&fc->dvb_adapter);
return ret;
success:
return 0;
}
static void flexcop_dvb_exit(struct flexcop_device *fc)
{
if (fc->init_state & FC_STATE_DVB_INIT) {
dvb_net_release(&fc->dvbnet);
fc->demux.dmx.close(&fc->demux.dmx);
fc->demux.dmx.remove_frontend(&fc->demux.dmx,&fc->mem_frontend);
fc->demux.dmx.remove_frontend(&fc->demux.dmx,&fc->hw_frontend);
dvb_dmxdev_release(&fc->dmxdev);
dvb_dmx_release(&fc->demux);
dvb_unregister_adapter(&fc->dvb_adapter);
deb_info("deinitialized dvb stuff\n");
}
fc->init_state &= ~FC_STATE_DVB_INIT;
}
/* these methods are necessary to achieve the long-term-goal of hiding the
* struct flexcop_device from the bus-parts */
void flexcop_pass_dmx_data(struct flexcop_device *fc, u8 *buf, u32 len)
{
dvb_dmx_swfilter(&fc->demux, buf, len);
}
EXPORT_SYMBOL(flexcop_pass_dmx_data);
void flexcop_pass_dmx_packets(struct flexcop_device *fc, u8 *buf, u32 no)
{
dvb_dmx_swfilter_packets(&fc->demux, buf, no);
}
EXPORT_SYMBOL(flexcop_pass_dmx_packets);
static void flexcop_reset(struct flexcop_device *fc)
{
flexcop_ibi_value v210,v204;
/* reset the flexcop itself */
fc->write_ibi_reg(fc,ctrl_208,ibi_zero);
v210.raw = 0;
v210.sw_reset_210.reset_blocks = 0xff;
v210.sw_reset_210.Block_reset_enable = 0xb2;
fc->write_ibi_reg(fc,sw_reset_210,v210);
/* reset the periphical devices */
v204 = fc->read_ibi_reg(fc,misc_204);
v204.misc_204.Per_reset_sig = 0;
fc->write_ibi_reg(fc,misc_204,v204);
v204.misc_204.Per_reset_sig = 1;
fc->write_ibi_reg(fc,misc_204,v204);
/* v208.raw = 0;
v208.ctrl_208.Null_filter_sig = 1;
fc->write_ibi_reg(fc,ctrl_208,v208);*/
}
struct flexcop_device *flexcop_device_kmalloc(size_t bus_specific_len)
{
void *bus;
struct flexcop_device *fc = kmalloc(sizeof(struct flexcop_device), GFP_KERNEL);
if (!fc) {
err("no memory");
return NULL;
}
memset(fc, 0, sizeof(struct flexcop_device));
bus = kmalloc(bus_specific_len, GFP_KERNEL);
if (!bus) {
err("no memory");
kfree(fc);
return NULL;
}
memset(bus, 0, bus_specific_len);
fc->bus_specific = bus;
return fc;
}
EXPORT_SYMBOL(flexcop_device_kmalloc);
void flexcop_device_kfree(struct flexcop_device *fc)
{
kfree(fc->bus_specific);
kfree(fc);
}
EXPORT_SYMBOL(flexcop_device_kfree);
int flexcop_device_initialize(struct flexcop_device *fc)
{
int ret;
ibi_zero.raw = 0;
flexcop_reset(fc);
flexcop_determine_revision(fc);
flexcop_sram_init(fc);
flexcop_hw_filter_init(fc);
flexcop_smc_ctrl(fc, 0);
if (fc->get_mac_addr(fc, 0) == 0) {
u8 *b = fc->mac_address;
info("MAC address = %02x:%02x:%02x:%02x:%02x:%02x", b[0],b[1],b[2],b[3],b[4],b[5]);
flexcop_set_mac_filter(fc,fc->mac_address);
flexcop_mac_filter_ctrl(fc,1);
} else
warn("reading of MAC address failed.\n");
if ((ret = flexcop_dvb_init(fc)))
goto error;
if ((ret = flexcop_i2c_init(fc)))
goto error;
if ((ret = flexcop_frontend_init(fc)))
goto error;
flexcop_device_name(fc,"initialization of","complete");
ret = 0;
goto success;
error:
flexcop_device_exit(fc);
success:
return ret;
}
EXPORT_SYMBOL(flexcop_device_initialize);
void flexcop_device_exit(struct flexcop_device *fc)
{
flexcop_frontend_exit(fc);
flexcop_i2c_exit(fc);
flexcop_dvb_exit(fc);
}
EXPORT_SYMBOL(flexcop_device_exit);
static int flexcop_module_init(void)
{
info(DRIVER_NAME " loaded successfully");
return 0;
}
static void flexcop_module_cleanup(void)
{
info(DRIVER_NAME " unloaded successfully");
}
module_init(flexcop_module_init);
module_exit(flexcop_module_cleanup);
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_NAME);
MODULE_LICENSE("GPL");
drivers/media/dvb/b2c2/flexcop.h 0 → 100644
View file @ 2add87a9
/*
* This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III
*
* flexcop.h - private header file for all flexcop-chip-source files.
*
* see flexcop.c for copyright information.
*/
#ifndef __FLEXCOP_H__
#define __FLEXCOP_H___
#define FC_LOG_PREFIX "b2c2-flexcop"
#include "flexcop-common.h"
extern int b2c2_flexcop_debug;
/* debug */
#ifdef CONFIG_DVB_B2C2_FLEXCOP_DEBUG
#define dprintk(level,args...) \
do { if ((b2c2_flexcop_debug & level)) printk(args); } while (0)
#else
#define dprintk(level,args...)
#endif
#define deb_info(args...) dprintk(0x01,args)
#define deb_tuner(args...) dprintk(0x02,args)
#define deb_i2c(args...) dprintk(0x04,args)
#define deb_ts(args...) dprintk(0x08,args)
#define deb_sram(args...) dprintk(0x10,args)
#endif
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7