Commit 2bbf6078 authored by Mark Brown's avatar Mark Brown

Merge branch 'asoc-omap' into for-3.7

parents 02e79476 b8101048
* Texas Instruments OMAP2+ McBSP module
Required properties:
- compatible: "ti,omap2420-mcbsp" for McBSP on OMAP2420
"ti,omap2430-mcbsp" for McBSP on OMAP2430
"ti,omap3-mcbsp" for McBSP on OMAP3
"ti,omap4-mcbsp" for McBSP on OMAP4 and newer SoC
- reg: Register location and size, for OMAP4+ as an array:
<MPU access base address, size>,
<L3 interconnect address, size>;
- reg-names: Array of strings associated with the address space
- interrupts: Interrupt numbers for the McBSP port, as an array in case the
McBSP IP have more interrupt lines:
<OCP compliant irq>,
<TX irq>,
<RX irq>;
- interrupt-names: Array of strings associated with the interrupt numbers
- interrupt-parent: The parent interrupt controller
- ti,buffer-size: Size of the FIFO on the port (OMAP2430 and newer SoC)
- ti,hwmods: Name of the hwmod associated to the McBSP port
Example:
mcbsp2: mcbsp@49022000 {
compatible = "ti,omap3-mcbsp";
reg = <0x49022000 0xff>,
<0x49028000 0xff>;
reg-names = "mpu", "sidetone";
interrupts = <0 17 0x4>, /* OCP compliant interrupt */
<0 62 0x4>, /* TX interrupt */
<0 63 0x4>, /* RX interrupt */
<0 4 0x4>; /* Sidetone */
interrupt-names = "common", "tx", "rx", "sidetone";
interrupt-parent = <&intc>;
ti,buffer-size = <1280>;
ti,hwmods = "mcbsp2";
};
......@@ -264,6 +264,16 @@ static __init void am3517_evm_musb_init(void)
usb_musb_init(&musb_board_data);
}
static __init void am3517_evm_mcbsp1_init(void)
{
u32 devconf0;
/* McBSP1 CLKR/FSR signal to be connected to CLKX/FSX pin */
devconf0 = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
devconf0 |= OMAP2_MCBSP1_CLKR_MASK | OMAP2_MCBSP1_FSR_MASK;
omap_ctrl_writel(devconf0, OMAP2_CONTROL_DEVCONF0);
}
static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
#if defined(CONFIG_PANEL_SHARP_LQ043T1DG01) || \
......@@ -373,6 +383,9 @@ static void __init am3517_evm_init(void)
/* MUSB */
am3517_evm_musb_init();
/* McBSP1 */
am3517_evm_mcbsp1_init();
/* MMC init function */
omap_hsmmc_init(mmc);
}
......
......@@ -15,6 +15,7 @@
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
......@@ -25,8 +26,6 @@
#include <plat/omap_device.h>
#include <linux/pm_runtime.h>
#include "control.h"
/*
* FIXME: Find a mechanism to enable/disable runtime the McBSP ICLK autoidle.
* Sidetone needs non-gated ICLK and sidetone autoidle is broken.
......@@ -34,112 +33,6 @@
#include "cm2xxx_3xxx.h"
#include "cm-regbits-34xx.h"
/* McBSP1 internal signal muxing function for OMAP2/3 */
static int omap2_mcbsp1_mux_rx_clk(struct device *dev, const char *signal,
const char *src)
{
u32 v;
v = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
if (!strcmp(signal, "clkr")) {
if (!strcmp(src, "clkr"))
v &= ~OMAP2_MCBSP1_CLKR_MASK;
else if (!strcmp(src, "clkx"))
v |= OMAP2_MCBSP1_CLKR_MASK;
else
return -EINVAL;
} else if (!strcmp(signal, "fsr")) {
if (!strcmp(src, "fsr"))
v &= ~OMAP2_MCBSP1_FSR_MASK;
else if (!strcmp(src, "fsx"))
v |= OMAP2_MCBSP1_FSR_MASK;
else
return -EINVAL;
} else {
return -EINVAL;
}
omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0);
return 0;
}
/* McBSP4 internal signal muxing function for OMAP4 */
#define OMAP4_CONTROL_MCBSPLP_ALBCTRLRX_FSX (1 << 31)
#define OMAP4_CONTROL_MCBSPLP_ALBCTRLRX_CLKX (1 << 30)
static int omap4_mcbsp4_mux_rx_clk(struct device *dev, const char *signal,
const char *src)
{
u32 v;
/*
* In CONTROL_MCBSPLP register only bit 30 (CLKR mux), and bit 31 (FSR
* mux) is used */
v = omap4_ctrl_pad_readl(OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_MCBSPLP);
if (!strcmp(signal, "clkr")) {
if (!strcmp(src, "clkr"))
v &= ~OMAP4_CONTROL_MCBSPLP_ALBCTRLRX_CLKX;
else if (!strcmp(src, "clkx"))
v |= OMAP4_CONTROL_MCBSPLP_ALBCTRLRX_CLKX;
else
return -EINVAL;
} else if (!strcmp(signal, "fsr")) {
if (!strcmp(src, "fsr"))
v &= ~OMAP4_CONTROL_MCBSPLP_ALBCTRLRX_FSX;
else if (!strcmp(src, "fsx"))
v |= OMAP4_CONTROL_MCBSPLP_ALBCTRLRX_FSX;
else
return -EINVAL;
} else {
return -EINVAL;
}
omap4_ctrl_pad_writel(v, OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_MCBSPLP);
return 0;
}
/* McBSP CLKS source switching function */
static int omap2_mcbsp_set_clk_src(struct device *dev, struct clk *clk,
const char *src)
{
struct clk *fck_src;
char *fck_src_name;
int r;
if (!strcmp(src, "clks_ext"))
fck_src_name = "pad_fck";
else if (!strcmp(src, "clks_fclk"))
fck_src_name = "prcm_fck";
else
return -EINVAL;
fck_src = clk_get(dev, fck_src_name);
if (IS_ERR_OR_NULL(fck_src)) {
pr_err("omap-mcbsp: %s: could not clk_get() %s\n", "clks",
fck_src_name);
return -EINVAL;
}
pm_runtime_put_sync(dev);
r = clk_set_parent(clk, fck_src);
if (IS_ERR_VALUE(r)) {
pr_err("omap-mcbsp: %s: could not clk_set_parent() to %s\n",
"clks", fck_src_name);
clk_put(fck_src);
return -EINVAL;
}
pm_runtime_get_sync(dev);
clk_put(fck_src);
return 0;
}
static int omap3_enable_st_clock(unsigned int id, bool enable)
{
unsigned int w;
......@@ -181,17 +74,11 @@ static int __init omap_init_mcbsp(struct omap_hwmod *oh, void *unused)
pdata->reg_size = 4;
pdata->has_ccr = true;
}
pdata->set_clk_src = omap2_mcbsp_set_clk_src;
/* On OMAP2/3 the McBSP1 port has 6 pin configuration */
if (id == 1 && oh->class->rev < MCBSP_CONFIG_TYPE4)
pdata->mux_signal = omap2_mcbsp1_mux_rx_clk;
/* On OMAP4 the McBSP4 port has 6 pin configuration */
if (id == 4 && oh->class->rev == MCBSP_CONFIG_TYPE4)
pdata->mux_signal = omap4_mcbsp4_mux_rx_clk;
if (oh->class->rev == MCBSP_CONFIG_TYPE3) {
if (oh->class->rev == MCBSP_CONFIG_TYPE2) {
/* The FIFO has 128 locations */
pdata->buffer_size = 0x80;
} else if (oh->class->rev == MCBSP_CONFIG_TYPE3) {
if (id == 2)
/* The FIFO has 1024 + 256 locations */
pdata->buffer_size = 0x500;
......@@ -227,6 +114,7 @@ static int __init omap_init_mcbsp(struct omap_hwmod *oh, void *unused)
static int __init omap2_mcbsp_init(void)
{
if (!of_have_populated_dt())
omap_hwmod_for_each_by_class("mcbsp", omap_init_mcbsp, NULL);
return 0;
......
......@@ -47,8 +47,6 @@ struct omap_mcbsp_platform_data {
bool has_wakeup; /* Wakeup capability */
bool has_ccr; /* Transceiver has configuration control registers */
int (*enable_st_clock)(unsigned int, bool);
int (*set_clk_src)(struct device *dev, struct clk *clk, const char *src);
int (*mux_signal)(struct device *dev, const char *signal, const char *src);
};
/**
......
......@@ -47,26 +47,10 @@ static int am3517evm_hw_params(struct snd_pcm_substream *substream,
/* Set the codec system clock for DAC and ADC */
ret = snd_soc_dai_set_sysclk(codec_dai, 0,
CODEC_CLOCK, SND_SOC_CLOCK_IN);
if (ret < 0) {
if (ret < 0)
printk(KERN_ERR "can't set codec system clock\n");
return ret;
}
ret = snd_soc_dai_set_sysclk(cpu_dai, OMAP_MCBSP_CLKR_SRC_CLKX, 0,
SND_SOC_CLOCK_IN);
if (ret < 0) {
printk(KERN_ERR "can't set CPU system clock OMAP_MCBSP_CLKR_SRC_CLKX\n");
return ret;
}
snd_soc_dai_set_sysclk(cpu_dai, OMAP_MCBSP_FSR_SRC_FSX, 0,
SND_SOC_CLOCK_IN);
if (ret < 0) {
printk(KERN_ERR "can't set CPU system clock OMAP_MCBSP_FSR_SRC_FSX\n");
return ret;
}
return 0;
}
static struct snd_soc_ops am3517evm_ops = {
......
......@@ -24,6 +24,7 @@
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/slab.h>
#include <linux/pm_runtime.h>
#include <plat/mcbsp.h>
......@@ -726,19 +727,39 @@ void omap_mcbsp_stop(struct omap_mcbsp *mcbsp, int tx, int rx)
int omap2_mcbsp_set_clks_src(struct omap_mcbsp *mcbsp, u8 fck_src_id)
{
struct clk *fck_src;
const char *src;
int r;
if (fck_src_id == MCBSP_CLKS_PAD_SRC)
src = "clks_ext";
src = "pad_fck";
else if (fck_src_id == MCBSP_CLKS_PRCM_SRC)
src = "clks_fclk";
src = "prcm_fck";
else
return -EINVAL;
if (mcbsp->pdata->set_clk_src)
return mcbsp->pdata->set_clk_src(mcbsp->dev, mcbsp->fclk, src);
else
fck_src = clk_get(mcbsp->dev, src);
if (IS_ERR(fck_src)) {
dev_err(mcbsp->dev, "CLKS: could not clk_get() %s\n", src);
return -EINVAL;
}
pm_runtime_put_sync(mcbsp->dev);
r = clk_set_parent(mcbsp->fclk, fck_src);
if (r) {
dev_err(mcbsp->dev, "CLKS: could not clk_set_parent() to %s\n",
src);
clk_put(fck_src);
return r;
}
pm_runtime_get_sync(mcbsp->dev);
clk_put(fck_src);
return 0;
}
int omap_mcbsp_6pin_src_mux(struct omap_mcbsp *mcbsp, u8 mux)
......
......@@ -334,9 +334,6 @@ void omap_mcbsp_stop(struct omap_mcbsp *mcbsp, int tx, int rx);
/* McBSP functional clock source changing function */
int omap2_mcbsp_set_clks_src(struct omap_mcbsp *mcbsp, u8 fck_src_id);
/* McBSP signal muxing API */
int omap_mcbsp_6pin_src_mux(struct omap_mcbsp *mcbsp, u8 mux);
/* Sidetone specific API */
int omap_st_set_chgain(struct omap_mcbsp *mcbsp, int channel, s16 chgain);
int omap_st_get_chgain(struct omap_mcbsp *mcbsp, int channel, s16 *chgain);
......
......@@ -26,6 +26,8 @@
#include <linux/module.h>
#include <linux/device.h>
#include <linux/pm_runtime.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
......@@ -398,12 +400,14 @@ static int omap_mcbsp_dai_set_dai_fmt(struct snd_soc_dai *cpu_dai,
/* Generic McBSP register settings */
regs->spcr2 |= XINTM(3) | FREE;
regs->spcr1 |= RINTM(3);
/* RFIG and XFIG are not defined in 34xx */
if (!cpu_is_omap34xx() && !cpu_is_omap44xx()) {
/* RFIG and XFIG are not defined in 2430 and on OMAP3+ */
if (!mcbsp->pdata->has_ccr) {
regs->rcr2 |= RFIG;
regs->xcr2 |= XFIG;
}
if (cpu_is_omap2430() || cpu_is_omap34xx() || cpu_is_omap44xx()) {
/* Configure XCCR/RCCR only for revisions which have ccr registers */
if (mcbsp->pdata->has_ccr) {
regs->xccr = DXENDLY(1) | XDMAEN | XDISABLE;
regs->rccr = RFULL_CYCLE | RDMAEN | RDISABLE;
}
......@@ -516,21 +520,9 @@ static int omap_mcbsp_dai_set_dai_sysclk(struct snd_soc_dai *cpu_dai,
return -EBUSY;
}
if (clk_id == OMAP_MCBSP_SYSCLK_CLK ||
clk_id == OMAP_MCBSP_SYSCLK_CLKS_FCLK ||
clk_id == OMAP_MCBSP_SYSCLK_CLKS_EXT ||
clk_id == OMAP_MCBSP_SYSCLK_CLKX_EXT ||
clk_id == OMAP_MCBSP_SYSCLK_CLKR_EXT) {
mcbsp->in_freq = freq;
regs->srgr2 &= ~CLKSM;
regs->pcr0 &= ~SCLKME;
} else if (cpu_class_is_omap1()) {
/*
* McBSP CLKR/FSR signal muxing functions are only available on
* OMAP2 or newer versions
*/
return -EINVAL;
}
switch (clk_id) {
case OMAP_MCBSP_SYSCLK_CLK:
......@@ -558,20 +550,6 @@ static int omap_mcbsp_dai_set_dai_sysclk(struct snd_soc_dai *cpu_dai,
case OMAP_MCBSP_SYSCLK_CLKR_EXT:
regs->pcr0 |= SCLKME;
break;
case OMAP_MCBSP_CLKR_SRC_CLKR:
err = omap_mcbsp_6pin_src_mux(mcbsp, CLKR_SRC_CLKR);
break;
case OMAP_MCBSP_CLKR_SRC_CLKX:
err = omap_mcbsp_6pin_src_mux(mcbsp, CLKR_SRC_CLKX);
break;
case OMAP_MCBSP_FSR_SRC_FSR:
err = omap_mcbsp_6pin_src_mux(mcbsp, FSR_SRC_FSR);
break;
case OMAP_MCBSP_FSR_SRC_FSX:
err = omap_mcbsp_6pin_src_mux(mcbsp, FSR_SRC_FSX);
break;
default:
err = -ENODEV;
}
......@@ -761,13 +739,74 @@ int omap_mcbsp_st_add_controls(struct snd_soc_pcm_runtime *rtd)
}
EXPORT_SYMBOL_GPL(omap_mcbsp_st_add_controls);
static struct omap_mcbsp_platform_data omap2420_pdata = {
.reg_step = 4,
.reg_size = 2,
};
static struct omap_mcbsp_platform_data omap2430_pdata = {
.reg_step = 4,
.reg_size = 4,
.has_ccr = true,
};
static struct omap_mcbsp_platform_data omap3_pdata = {
.reg_step = 4,
.reg_size = 4,
.has_ccr = true,
.has_wakeup = true,
};
static struct omap_mcbsp_platform_data omap4_pdata = {
.reg_step = 4,
.reg_size = 4,
.has_ccr = true,
.has_wakeup = true,
};
static const struct of_device_id omap_mcbsp_of_match[] = {
{
.compatible = "ti,omap2420-mcbsp",
.data = &omap2420_pdata,
},
{
.compatible = "ti,omap2430-mcbsp",
.data = &omap2430_pdata,
},
{
.compatible = "ti,omap3-mcbsp",
.data = &omap3_pdata,
},
{
.compatible = "ti,omap4-mcbsp",
.data = &omap4_pdata,
},
{ },
};
MODULE_DEVICE_TABLE(of, omap_mcbsp_of_match);
static __devinit int asoc_mcbsp_probe(struct platform_device *pdev)
{
struct omap_mcbsp_platform_data *pdata = dev_get_platdata(&pdev->dev);
struct omap_mcbsp *mcbsp;
const struct of_device_id *match;
int ret;
if (!pdata) {
match = of_match_device(omap_mcbsp_of_match, &pdev->dev);
if (match) {
struct device_node *node = pdev->dev.of_node;
int buffer_size;
pdata = devm_kzalloc(&pdev->dev,
sizeof(struct omap_mcbsp_platform_data),
GFP_KERNEL);
if (!pdata)
return -ENOMEM;
memcpy(pdata, match->data, sizeof(*pdata));
if (!of_property_read_u32(node, "ti,buffer-size", &buffer_size))
pdata->buffer_size = buffer_size;
} else if (!pdata) {
dev_err(&pdev->dev, "missing platform data.\n");
return -EINVAL;
}
......@@ -809,6 +848,7 @@ static struct platform_driver asoc_mcbsp_driver = {
.driver = {
.name = "omap-mcbsp",
.owner = THIS_MODULE,
.of_match_table = omap_mcbsp_of_match,
},
.probe = asoc_mcbsp_probe,
......
......@@ -32,10 +32,6 @@ enum omap_mcbsp_clksrg_clk {
OMAP_MCBSP_SYSCLK_CLK, /* Internal ICLK */
OMAP_MCBSP_SYSCLK_CLKX_EXT, /* External CLKX pin */
OMAP_MCBSP_SYSCLK_CLKR_EXT, /* External CLKR pin */
OMAP_MCBSP_CLKR_SRC_CLKR, /* CLKR from CLKR pin */
OMAP_MCBSP_CLKR_SRC_CLKX, /* CLKR from CLKX pin */
OMAP_MCBSP_FSR_SRC_FSR, /* FSR from FSR pin */
OMAP_MCBSP_FSR_SRC_FSX, /* FSR from FSX pin */
};
/* McBSP dividers */
......@@ -43,22 +39,6 @@ enum omap_mcbsp_div {
OMAP_MCBSP_CLKGDV, /* Sample rate generator divider */
};
#if defined(CONFIG_SOC_OMAP2420)
#define NUM_LINKS 2
#endif
#if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX)
#undef NUM_LINKS
#define NUM_LINKS 3
#endif
#if defined(CONFIG_ARCH_OMAP4)
#undef NUM_LINKS
#define NUM_LINKS 4
#endif
#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_SOC_OMAP2430)
#undef NUM_LINKS
#define NUM_LINKS 5
#endif
int omap_mcbsp_st_add_controls(struct snd_soc_pcm_runtime *rtd);
#endif
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment