Commit 2c522955 authored by David Mosberger's avatar David Mosberger

Merge wailua.hpl.hp.com:/bk/vanilla/linux-2.5

into wailua.hpl.hp.com:/bk/lia64/to-linus-2.5
parents 45fbecb1 25439a10
...@@ -83,7 +83,7 @@ fi ...@@ -83,7 +83,7 @@ fi
define_bool CONFIG_KCORE_ELF y # On IA-64, we always want an ELF /proc/kcore. define_bool CONFIG_KCORE_ELF y # On IA-64, we always want an ELF /proc/kcore.
bool 'SMP support' CONFIG_SMP bool 'SMP support' CONFIG_SMP
tristate 'Support running of Linux/x86 binaries' CONFIG_IA32_SUPPORT bool 'Support running of Linux/x86 binaries' CONFIG_IA32_SUPPORT
bool 'Performance monitor support' CONFIG_PERFMON bool 'Performance monitor support' CONFIG_PERFMON
tristate '/proc/pal support' CONFIG_IA64_PALINFO tristate '/proc/pal support' CONFIG_IA64_PALINFO
tristate '/proc/efi/vars support' CONFIG_EFI_VARS tristate '/proc/efi/vars support' CONFIG_EFI_VARS
...@@ -123,6 +123,7 @@ source drivers/block/Config.in ...@@ -123,6 +123,7 @@ source drivers/block/Config.in
source drivers/ieee1394/Config.in source drivers/ieee1394/Config.in
source drivers/message/i2o/Config.in source drivers/message/i2o/Config.in
source drivers/md/Config.in source drivers/md/Config.in
source drivers/message/fusion/Config.in
mainmenu_option next_comment mainmenu_option next_comment
comment 'ATA/IDE/MFM/RLL support' comment 'ATA/IDE/MFM/RLL support'
......
...@@ -214,6 +214,7 @@ struct sba_device { ...@@ -214,6 +214,7 @@ struct sba_device {
static struct sba_device *sba_list; static struct sba_device *sba_list;
static int sba_count; static int sba_count;
static int reserve_sba_gart = 1; static int reserve_sba_gart = 1;
static struct pci_dev sac_only_dev;
#define sba_sg_iova(sg) (sg->address) #define sba_sg_iova(sg) (sg->address)
#define sba_sg_len(sg) (sg->length) #define sba_sg_len(sg) (sg->length)
...@@ -950,7 +951,12 @@ sba_alloc_consistent(struct pci_dev *hwdev, size_t size, dma_addr_t *dma_handle) ...@@ -950,7 +951,12 @@ sba_alloc_consistent(struct pci_dev *hwdev, size_t size, dma_addr_t *dma_handle)
if (ret) { if (ret) {
memset(ret, 0, size); memset(ret, 0, size);
*dma_handle = sba_map_single(hwdev, ret, size, 0); /*
* REVISIT: if sba_map_single starts needing more
* than dma_mask from the device, this needs to be
* updated.
*/
*dma_handle = sba_map_single(&sac_only_dev, ret, size, 0);
} }
return ret; return ret;
...@@ -1807,1854 +1813,10 @@ void __init sba_init(void) ...@@ -1807,1854 +1813,10 @@ void __init sba_init(void)
sba_dev->sba_hpa = hpa; sba_dev->sba_hpa = hpa;
/* /*
* We need to check for an AGP device, if we find one, then only * We pass this fake device from alloc_consistent to ensure
* use part of the IOVA space for PCI DMA, the rest is for GART. * we only use SAC for alloc_consistent mappings.
* REVISIT for multiple IOC.
*/ */
pci_for_each_dev(device) sac_only_dev.dma_mask = 0xFFFFFFFFUL;
agp_found |= pci_find_capability(device, PCI_CAP_ID_AGP);
if (agp_found && reserve_sba_gart)
SBA_SET_AGP(sba_dev);
sba_hw_init(sba_dev);
sba_common_init(sba_dev);
#ifdef CONFIG_PROC_FS
{
struct proc_dir_entry * proc_mckinley_root;
proc_mckinley_root = proc_mkdir("bus/mckinley",0);
create_proc_info_entry(sba_rev, 0, proc_mckinley_root, sba_proc_info);
create_proc_info_entry("bitmap", 0, proc_mckinley_root, sba_resource_map);
}
#endif
}
static int __init
nosbagart (char *str)
{
reserve_sba_gart = 0;
return 1;
}
__setup("nosbagart",nosbagart);
EXPORT_SYMBOL(sba_init);
EXPORT_SYMBOL(sba_map_single);
EXPORT_SYMBOL(sba_unmap_single);
EXPORT_SYMBOL(sba_map_sg);
EXPORT_SYMBOL(sba_unmap_sg);
EXPORT_SYMBOL(sba_dma_address);
EXPORT_SYMBOL(sba_alloc_consistent);
EXPORT_SYMBOL(sba_free_consistent);
/*
** IA64 System Bus Adapter (SBA) I/O MMU manager
**
** (c) Copyright 2002 Alex Williamson
** (c) Copyright 2002 Hewlett-Packard Company
**
** Portions (c) 2000 Grant Grundler (from parisc I/O MMU code)
** Portions (c) 1999 Dave S. Miller (from sparc64 I/O MMU code)
**
** This program is free software; you can redistribute it and/or modify
** it under the terms of the GNU General Public License as published by
** the Free Software Foundation; either version 2 of the License, or
** (at your option) any later version.
**
**
** This module initializes the IOC (I/O Controller) found on HP
** McKinley machines and their successors.
**
*/
#include <linux/config.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/spinlock.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/string.h>
#include <linux/pci.h>
#include <linux/proc_fs.h>
#include <asm/delay.h> /* ia64_get_itc() */
#include <asm/io.h>
#include <asm/page.h> /* PAGE_OFFSET */
#include <asm/efi.h>
#define DRIVER_NAME "SBA"
#ifndef CONFIG_IA64_HP_PROTO
#define ALLOW_IOV_BYPASS
#endif
#define ENABLE_MARK_CLEAN
/*
** The number of debug flags is a clue - this code is fragile.
*/
#undef DEBUG_SBA_INIT
#undef DEBUG_SBA_RUN
#undef DEBUG_SBA_RUN_SG
#undef DEBUG_SBA_RESOURCE
#undef ASSERT_PDIR_SANITY
#undef DEBUG_LARGE_SG_ENTRIES
#undef DEBUG_BYPASS
#define SBA_INLINE __inline__
/* #define SBA_INLINE */
#ifdef DEBUG_SBA_INIT
#define DBG_INIT(x...) printk(x)
#else
#define DBG_INIT(x...)
#endif
#ifdef DEBUG_SBA_RUN
#define DBG_RUN(x...) printk(x)
#else
#define DBG_RUN(x...)
#endif
#ifdef DEBUG_SBA_RUN_SG
#define DBG_RUN_SG(x...) printk(x)
#else
#define DBG_RUN_SG(x...)
#endif
#ifdef DEBUG_SBA_RESOURCE
#define DBG_RES(x...) printk(x)
#else
#define DBG_RES(x...)
#endif
#ifdef DEBUG_BYPASS
#define DBG_BYPASS(x...) printk(x)
#else
#define DBG_BYPASS(x...)
#endif
#ifdef ASSERT_PDIR_SANITY
#define ASSERT(expr) \
if(!(expr)) { \
printk( "\n" __FILE__ ":%d: Assertion " #expr " failed!\n",__LINE__); \
panic(#expr); \
}
#else
#define ASSERT(expr)
#endif
#define KB(x) ((x) * 1024)
#define MB(x) (KB (KB (x)))
#define GB(x) (MB (KB (x)))
/*
** The number of pdir entries to "free" before issueing
** a read to PCOM register to flush out PCOM writes.
** Interacts with allocation granularity (ie 4 or 8 entries
** allocated and free'd/purged at a time might make this
** less interesting).
*/
#define DELAYED_RESOURCE_CNT 16
#define DEFAULT_DMA_HINT_REG 0
#define ZX1_FUNC_ID_VALUE ((PCI_DEVICE_ID_HP_ZX1_SBA << 16) | PCI_VENDOR_ID_HP)
#define ZX1_MC_ID ((PCI_DEVICE_ID_HP_ZX1_MC << 16) | PCI_VENDOR_ID_HP)
#define SBA_FUNC_ID 0x0000 /* function id */
#define SBA_FCLASS 0x0008 /* function class, bist, header, rev... */
#define SBA_FUNC_SIZE 0x10000 /* SBA configuration function reg set */
unsigned int __initdata zx1_func_offsets[] = {0x1000, 0x4000, 0x8000,
0x9000, 0xa000, -1};
#define SBA_IOC_OFFSET 0x1000
#define MAX_IOC 1 /* we only have 1 for now*/
#define IOC_IBASE 0x300 /* IO TLB */
#define IOC_IMASK 0x308
#define IOC_PCOM 0x310
#define IOC_TCNFG 0x318
#define IOC_PDIR_BASE 0x320
#define IOC_IOVA_SPACE_BASE 0x40000000 /* IOVA ranges start at 1GB */
/*
** IOC supports 4/8/16/64KB page sizes (see TCNFG register)
** It's safer (avoid memory corruption) to keep DMA page mappings
** equivalently sized to VM PAGE_SIZE.
**
** We really can't avoid generating a new mapping for each
** page since the Virtual Coherence Index has to be generated
** and updated for each page.
**
** IOVP_SIZE could only be greater than PAGE_SIZE if we are
** confident the drivers really only touch the next physical
** page iff that driver instance owns it.
*/
#define IOVP_SIZE PAGE_SIZE
#define IOVP_SHIFT PAGE_SHIFT
#define IOVP_MASK PAGE_MASK
struct ioc {
unsigned long ioc_hpa; /* I/O MMU base address */
char *res_map; /* resource map, bit == pdir entry */
u64 *pdir_base; /* physical base address */
unsigned long ibase; /* pdir IOV Space base */
unsigned long imask; /* pdir IOV Space mask */
unsigned long *res_hint; /* next avail IOVP - circular search */
spinlock_t res_lock;
unsigned long hint_mask_pdir; /* bits used for DMA hints */
unsigned int res_bitshift; /* from the RIGHT! */
unsigned int res_size; /* size of resource map in bytes */
unsigned int hint_shift_pdir;
unsigned long dma_mask;
#if DELAYED_RESOURCE_CNT > 0
int saved_cnt;
struct sba_dma_pair {
dma_addr_t iova;
size_t size;
} saved[DELAYED_RESOURCE_CNT];
#endif
#ifdef CONFIG_PROC_FS
#define SBA_SEARCH_SAMPLE 0x100
unsigned long avg_search[SBA_SEARCH_SAMPLE];
unsigned long avg_idx; /* current index into avg_search */
unsigned long used_pages;
unsigned long msingle_calls;
unsigned long msingle_pages;
unsigned long msg_calls;
unsigned long msg_pages;
unsigned long usingle_calls;
unsigned long usingle_pages;
unsigned long usg_calls;
unsigned long usg_pages;
#ifdef ALLOW_IOV_BYPASS
unsigned long msingle_bypass;
unsigned long usingle_bypass;
unsigned long msg_bypass;
#endif
#endif
/* STUFF We don't need in performance path */
unsigned int pdir_size; /* in bytes, determined by IOV Space size */
};
struct sba_device {
struct sba_device *next; /* list of SBA's in system */
const char *name;
unsigned long sba_hpa; /* base address */
spinlock_t sba_lock;
unsigned int flags; /* state/functionality enabled */
unsigned int hw_rev; /* HW revision of chip */
unsigned int num_ioc; /* number of on-board IOC's */
struct ioc ioc[MAX_IOC];
};
static struct sba_device *sba_list;
static int sba_count;
static int reserve_sba_gart = 1;
#define sba_sg_iova(sg) (sg->address)
#define sba_sg_len(sg) (sg->length)
#define sba_sg_buffer(sg) (sg->orig_address)
/* REVISIT - fix me for multiple SBAs/IOCs */
#define GET_IOC(dev) (sba_list->ioc)
#define SBA_SET_AGP(sba_dev) (sba_dev->flags |= 0x1)
#define SBA_GET_AGP(sba_dev) (sba_dev->flags & 0x1)
/*
** DMA_CHUNK_SIZE is used by the SCSI mid-layer to break up
** (or rather not merge) DMA's into managable chunks.
** On parisc, this is more of the software/tuning constraint
** rather than the HW. I/O MMU allocation alogorithms can be
** faster with smaller size is (to some degree).
*/
#define DMA_CHUNK_SIZE (BITS_PER_LONG*PAGE_SIZE)
/* Looks nice and keeps the compiler happy */
#define SBA_DEV(d) ((struct sba_device *) (d))
#define ROUNDUP(x,y) ((x + ((y)-1)) & ~((y)-1))
/************************************
** SBA register read and write support
**
** BE WARNED: register writes are posted.
** (ie follow writes which must reach HW with a read)
**
*/
#define READ_REG(addr) __raw_readq(addr)
#define WRITE_REG(val, addr) __raw_writeq(val, addr)
#ifdef DEBUG_SBA_INIT
/**
* sba_dump_tlb - debugging only - print IOMMU operating parameters
* @hpa: base address of the IOMMU
*
* Print the size/location of the IO MMU PDIR.
*/
static void
sba_dump_tlb(char *hpa)
{
DBG_INIT("IO TLB at 0x%p\n", (void *)hpa);
DBG_INIT("IOC_IBASE : %016lx\n", READ_REG(hpa+IOC_IBASE));
DBG_INIT("IOC_IMASK : %016lx\n", READ_REG(hpa+IOC_IMASK));
DBG_INIT("IOC_TCNFG : %016lx\n", READ_REG(hpa+IOC_TCNFG));
DBG_INIT("IOC_PDIR_BASE: %016lx\n", READ_REG(hpa+IOC_PDIR_BASE));
DBG_INIT("\n");
}
#endif
#ifdef ASSERT_PDIR_SANITY
/**
* sba_dump_pdir_entry - debugging only - print one IOMMU PDIR entry
* @ioc: IO MMU structure which owns the pdir we are interested in.
* @msg: text to print ont the output line.
* @pide: pdir index.
*
* Print one entry of the IO MMU PDIR in human readable form.
*/
static void
sba_dump_pdir_entry(struct ioc *ioc, char *msg, uint pide)
{
/* start printing from lowest pde in rval */
u64 *ptr = &(ioc->pdir_base[pide & ~(BITS_PER_LONG - 1)]);
unsigned long *rptr = (unsigned long *) &(ioc->res_map[(pide >>3) & ~(sizeof(unsigned long) - 1)]);
uint rcnt;
/* printk(KERN_DEBUG "SBA: %s rp %p bit %d rval 0x%lx\n", */
printk("SBA: %s rp %p bit %d rval 0x%lx\n",
msg, rptr, pide & (BITS_PER_LONG - 1), *rptr);
rcnt = 0;
while (rcnt < BITS_PER_LONG) {
printk("%s %2d %p %016Lx\n",
(rcnt == (pide & (BITS_PER_LONG - 1)))
? " -->" : " ",
rcnt, ptr, *ptr );
rcnt++;
ptr++;
}
printk("%s", msg);
}
/**
* sba_check_pdir - debugging only - consistency checker
* @ioc: IO MMU structure which owns the pdir we are interested in.
* @msg: text to print ont the output line.
*
* Verify the resource map and pdir state is consistent
*/
static int
sba_check_pdir(struct ioc *ioc, char *msg)
{
u64 *rptr_end = (u64 *) &(ioc->res_map[ioc->res_size]);
u64 *rptr = (u64 *) ioc->res_map; /* resource map ptr */
u64 *pptr = ioc->pdir_base; /* pdir ptr */
uint pide = 0;
while (rptr < rptr_end) {
u64 rval;
int rcnt; /* number of bits we might check */
rval = *rptr;
rcnt = 64;
while (rcnt) {
/* Get last byte and highest bit from that */
u32 pde = ((u32)((*pptr >> (63)) & 0x1));
if ((rval & 0x1) ^ pde)
{
/*
** BUMMER! -- res_map != pdir --
** Dump rval and matching pdir entries
*/
sba_dump_pdir_entry(ioc, msg, pide);
return(1);
}
rcnt--;
rval >>= 1; /* try the next bit */
pptr++;
pide++;
}
rptr++; /* look at next word of res_map */
}
/* It'd be nice if we always got here :^) */
return 0;
}
/**
* sba_dump_sg - debugging only - print Scatter-Gather list
* @ioc: IO MMU structure which owns the pdir we are interested in.
* @startsg: head of the SG list
* @nents: number of entries in SG list
*
* print the SG list so we can verify it's correct by hand.
*/
static void
sba_dump_sg( struct ioc *ioc, struct scatterlist *startsg, int nents)
{
while (nents-- > 0) {
printk(" %d : %08lx/%05x %p\n",
nents,
(unsigned long) sba_sg_iova(startsg),
sba_sg_len(startsg),
sba_sg_buffer(startsg));
startsg++;
}
}
static void
sba_check_sg( struct ioc *ioc, struct scatterlist *startsg, int nents)
{
struct scatterlist *the_sg = startsg;
int the_nents = nents;
while (the_nents-- > 0) {
if (sba_sg_buffer(the_sg) == 0x0UL)
sba_dump_sg(NULL, startsg, nents);
the_sg++;
}
}
#endif /* ASSERT_PDIR_SANITY */
/**************************************************************
*
* I/O Pdir Resource Management
*
* Bits set in the resource map are in use.
* Each bit can represent a number of pages.
* LSbs represent lower addresses (IOVA's).
*
***************************************************************/
#define PAGES_PER_RANGE 1 /* could increase this to 4 or 8 if needed */
/* Convert from IOVP to IOVA and vice versa. */
#define SBA_IOVA(ioc,iovp,offset,hint_reg) ((ioc->ibase) | (iovp) | (offset) | ((hint_reg)<<(ioc->hint_shift_pdir)))
#define SBA_IOVP(ioc,iova) (((iova) & ioc->hint_mask_pdir) & ~(ioc->ibase))
/* FIXME : review these macros to verify correctness and usage */
#define PDIR_INDEX(iovp) ((iovp)>>IOVP_SHIFT)
#define RESMAP_MASK(n) ~(~0UL << (n))
#define RESMAP_IDX_MASK (sizeof(unsigned long) - 1)
/**
* sba_search_bitmap - find free space in IO PDIR resource bitmap
* @ioc: IO MMU structure which owns the pdir we are interested in.
* @bits_wanted: number of entries we need.
*
* Find consecutive free bits in resource bitmap.
* Each bit represents one entry in the IO Pdir.
* Cool perf optimization: search for log2(size) bits at a time.
*/
static SBA_INLINE unsigned long
sba_search_bitmap(struct ioc *ioc, unsigned long bits_wanted)
{
unsigned long *res_ptr = ioc->res_hint;
unsigned long *res_end = (unsigned long *) &(ioc->res_map[ioc->res_size]);
unsigned long pide = ~0UL;
ASSERT(((unsigned long) ioc->res_hint & (sizeof(unsigned long) - 1UL)) == 0);
ASSERT(res_ptr < res_end);
if (bits_wanted > (BITS_PER_LONG/2)) {
/* Search word at a time - no mask needed */
for(; res_ptr < res_end; ++res_ptr) {
if (*res_ptr == 0) {
*res_ptr = RESMAP_MASK(bits_wanted);
pide = ((unsigned long)res_ptr - (unsigned long)ioc->res_map);
pide <<= 3; /* convert to bit address */
break;
}
}
/* point to the next word on next pass */
res_ptr++;
ioc->res_bitshift = 0;
} else {
/*
** Search the resource bit map on well-aligned values.
** "o" is the alignment.
** We need the alignment to invalidate I/O TLB using
** SBA HW features in the unmap path.
*/
unsigned long o = 1 << get_order(bits_wanted << PAGE_SHIFT);
uint bitshiftcnt = ROUNDUP(ioc->res_bitshift, o);
unsigned long mask;
if (bitshiftcnt >= BITS_PER_LONG) {
bitshiftcnt = 0;
res_ptr++;
}
mask = RESMAP_MASK(bits_wanted) << bitshiftcnt;
DBG_RES("%s() o %ld %p", __FUNCTION__, o, res_ptr);
while(res_ptr < res_end)
{
DBG_RES(" %p %lx %lx\n", res_ptr, mask, *res_ptr);
ASSERT(0 != mask);
if(0 == ((*res_ptr) & mask)) {
*res_ptr |= mask; /* mark resources busy! */
pide = ((unsigned long)res_ptr - (unsigned long)ioc->res_map);
pide <<= 3; /* convert to bit address */
pide += bitshiftcnt;
break;
}
mask <<= o;
bitshiftcnt += o;
if (0 == mask) {
mask = RESMAP_MASK(bits_wanted);
bitshiftcnt=0;
res_ptr++;
}
}
/* look in the same word on the next pass */
ioc->res_bitshift = bitshiftcnt + bits_wanted;
}
/* wrapped ? */
if (res_end <= res_ptr) {
ioc->res_hint = (unsigned long *) ioc->res_map;
ioc->res_bitshift = 0;
} else {
ioc->res_hint = res_ptr;
}
return (pide);
}
/**
* sba_alloc_range - find free bits and mark them in IO PDIR resource bitmap
* @ioc: IO MMU structure which owns the pdir we are interested in.
* @size: number of bytes to create a mapping for
*
* Given a size, find consecutive unmarked and then mark those bits in the
* resource bit map.
*/
static int
sba_alloc_range(struct ioc *ioc, size_t size)
{
unsigned int pages_needed = size >> IOVP_SHIFT;
#ifdef CONFIG_PROC_FS
unsigned long itc_start = ia64_get_itc();
#endif
unsigned long pide;
ASSERT(pages_needed);
ASSERT((pages_needed * IOVP_SIZE) <= DMA_CHUNK_SIZE);
ASSERT(pages_needed <= BITS_PER_LONG);
ASSERT(0 == (size & ~IOVP_MASK));
/*
** "seek and ye shall find"...praying never hurts either...
*/
pide = sba_search_bitmap(ioc, pages_needed);
if (pide >= (ioc->res_size << 3)) {
pide = sba_search_bitmap(ioc, pages_needed);
if (pide >= (ioc->res_size << 3))
panic(__FILE__ ": I/O MMU @ %lx is out of mapping resources\n", ioc->ioc_hpa);
}
#ifdef ASSERT_PDIR_SANITY
/* verify the first enable bit is clear */
if(0x00 != ((u8 *) ioc->pdir_base)[pide*sizeof(u64) + 7]) {
sba_dump_pdir_entry(ioc, "sba_search_bitmap() botched it?", pide);
}
#endif
DBG_RES("%s(%x) %d -> %lx hint %x/%x\n",
__FUNCTION__, size, pages_needed, pide,
(uint) ((unsigned long) ioc->res_hint - (unsigned long) ioc->res_map),
ioc->res_bitshift );
#ifdef CONFIG_PROC_FS
{
unsigned long itc_end = ia64_get_itc();
unsigned long tmp = itc_end - itc_start;
/* check for roll over */
itc_start = (itc_end < itc_start) ? -(tmp) : (tmp);
}
ioc->avg_search[ioc->avg_idx++] = itc_start;
ioc->avg_idx &= SBA_SEARCH_SAMPLE - 1;
ioc->used_pages += pages_needed;
#endif
return (pide);
}
/**
* sba_free_range - unmark bits in IO PDIR resource bitmap
* @ioc: IO MMU structure which owns the pdir we are interested in.
* @iova: IO virtual address which was previously allocated.
* @size: number of bytes to create a mapping for
*
* clear bits in the ioc's resource map
*/
static SBA_INLINE void
sba_free_range(struct ioc *ioc, dma_addr_t iova, size_t size)
{
unsigned long iovp = SBA_IOVP(ioc, iova);
unsigned int pide = PDIR_INDEX(iovp);
unsigned int ridx = pide >> 3; /* convert bit to byte address */
unsigned long *res_ptr = (unsigned long *) &((ioc)->res_map[ridx & ~RESMAP_IDX_MASK]);
int bits_not_wanted = size >> IOVP_SHIFT;
/* 3-bits "bit" address plus 2 (or 3) bits for "byte" == bit in word */
unsigned long m = RESMAP_MASK(bits_not_wanted) << (pide & (BITS_PER_LONG - 1));
DBG_RES("%s( ,%x,%x) %x/%lx %x %p %lx\n",
__FUNCTION__, (uint) iova, size,
bits_not_wanted, m, pide, res_ptr, *res_ptr);
#ifdef CONFIG_PROC_FS
ioc->used_pages -= bits_not_wanted;
#endif
ASSERT(m != 0);
ASSERT(bits_not_wanted);
ASSERT((bits_not_wanted * IOVP_SIZE) <= DMA_CHUNK_SIZE);
ASSERT(bits_not_wanted <= BITS_PER_LONG);
ASSERT((*res_ptr & m) == m); /* verify same bits are set */
*res_ptr &= ~m;
}
/**************************************************************
*
* "Dynamic DMA Mapping" support (aka "Coherent I/O")
*
***************************************************************/
#define SBA_DMA_HINT(ioc, val) ((val) << (ioc)->hint_shift_pdir)
/**
* sba_io_pdir_entry - fill in one IO PDIR entry
* @pdir_ptr: pointer to IO PDIR entry
* @vba: Virtual CPU address of buffer to map
*
* SBA Mapping Routine
*
* Given a virtual address (vba, arg1) sba_io_pdir_entry()
* loads the I/O PDIR entry pointed to by pdir_ptr (arg0).
* Each IO Pdir entry consists of 8 bytes as shown below
* (LSB == bit 0):
*
* 63 40 11 7 0
* +-+---------------------+----------------------------------+----+--------+
* |V| U | PPN[39:12] | U | FF |
* +-+---------------------+----------------------------------+----+--------+
*
* V == Valid Bit
* U == Unused
* PPN == Physical Page Number
*
* The physical address fields are filled with the results of virt_to_phys()
* on the vba.
*/
#if 1
#define sba_io_pdir_entry(pdir_ptr, vba) *pdir_ptr = ((vba & ~0xE000000000000FFFULL) | 0x80000000000000FFULL)
#else
void SBA_INLINE
sba_io_pdir_entry(u64 *pdir_ptr, unsigned long vba)
{
*pdir_ptr = ((vba & ~0xE000000000000FFFULL) | 0x80000000000000FFULL);
}
#endif
#ifdef ENABLE_MARK_CLEAN
/**
* Since DMA is i-cache coherent, any (complete) pages that were written via
* DMA can be marked as "clean" so that update_mmu_cache() doesn't have to
* flush them when they get mapped into an executable vm-area.
*/
static void
mark_clean (void *addr, size_t size)
{
unsigned long pg_addr, end;
pg_addr = PAGE_ALIGN((unsigned long) addr);
end = (unsigned long) addr + size;
while (pg_addr + PAGE_SIZE <= end) {
struct page *page = virt_to_page(pg_addr);
set_bit(PG_arch_1, &page->flags);
pg_addr += PAGE_SIZE;
}
}
#endif
/**
* sba_mark_invalid - invalidate one or more IO PDIR entries
* @ioc: IO MMU structure which owns the pdir we are interested in.
* @iova: IO Virtual Address mapped earlier
* @byte_cnt: number of bytes this mapping covers.
*
* Marking the IO PDIR entry(ies) as Invalid and invalidate
* corresponding IO TLB entry. The PCOM (Purge Command Register)
* is to purge stale entries in the IO TLB when unmapping entries.
*
* The PCOM register supports purging of multiple pages, with a minium
* of 1 page and a maximum of 2GB. Hardware requires the address be
* aligned to the size of the range being purged. The size of the range
* must be a power of 2. The "Cool perf optimization" in the
* allocation routine helps keep that true.
*/
static SBA_INLINE void
sba_mark_invalid(struct ioc *ioc, dma_addr_t iova, size_t byte_cnt)
{
u32 iovp = (u32) SBA_IOVP(ioc,iova);
int off = PDIR_INDEX(iovp);
/* Must be non-zero and rounded up */
ASSERT(byte_cnt > 0);
ASSERT(0 == (byte_cnt & ~IOVP_MASK));
#ifdef ASSERT_PDIR_SANITY
/* Assert first pdir entry is set */
if (!(ioc->pdir_base[off] >> 60)) {
sba_dump_pdir_entry(ioc,"sba_mark_invalid()", PDIR_INDEX(iovp));
}
#endif
if (byte_cnt <= IOVP_SIZE)
{
ASSERT(off < ioc->pdir_size);
iovp |= IOVP_SHIFT; /* set "size" field for PCOM */
/*
** clear I/O PDIR entry "valid" bit
** Do NOT clear the rest - save it for debugging.
** We should only clear bits that have previously
** been enabled.
*/
ioc->pdir_base[off] &= ~(0x80000000000000FFULL);
} else {
u32 t = get_order(byte_cnt) + PAGE_SHIFT;
iovp |= t;
ASSERT(t <= 31); /* 2GB! Max value of "size" field */
do {
/* verify this pdir entry is enabled */
ASSERT(ioc->pdir_base[off] >> 63);
/* clear I/O Pdir entry "valid" bit first */
ioc->pdir_base[off] &= ~(0x80000000000000FFULL);
off++;
byte_cnt -= IOVP_SIZE;
} while (byte_cnt > 0);
}
WRITE_REG(iovp, ioc->ioc_hpa+IOC_PCOM);
}
/**
* sba_map_single - map one buffer and return IOVA for DMA
* @dev: instance of PCI owned by the driver that's asking.
* @addr: driver buffer to map.
* @size: number of bytes to map in driver buffer.
* @direction: R/W or both.
*
* See Documentation/DMA-mapping.txt
*/
dma_addr_t
sba_map_single(struct pci_dev *dev, void *addr, size_t size, int direction)
{
struct ioc *ioc;
unsigned long flags;
dma_addr_t iovp;
dma_addr_t offset;
u64 *pdir_start;
int pide;
#ifdef ALLOW_IOV_BYPASS
unsigned long pci_addr = virt_to_phys(addr);
#endif
ioc = GET_IOC(dev);
ASSERT(ioc);
#ifdef ALLOW_IOV_BYPASS
/*
** Check if the PCI device can DMA to ptr... if so, just return ptr
*/
if ((pci_addr & ~dev->dma_mask) == 0) {
/*
** Device is bit capable of DMA'ing to the buffer...
** just return the PCI address of ptr
*/
#ifdef CONFIG_PROC_FS
spin_lock_irqsave(&ioc->res_lock, flags);
ioc->msingle_bypass++;
spin_unlock_irqrestore(&ioc->res_lock, flags);
#endif
DBG_BYPASS("sba_map_single() bypass mask/addr: 0x%lx/0x%lx\n",
dev->dma_mask, pci_addr);
return pci_addr;
}
#endif
ASSERT(size > 0);
ASSERT(size <= DMA_CHUNK_SIZE);
/* save offset bits */
offset = ((dma_addr_t) (long) addr) & ~IOVP_MASK;
/* round up to nearest IOVP_SIZE */
size = (size + offset + ~IOVP_MASK) & IOVP_MASK;
spin_lock_irqsave(&ioc->res_lock, flags);
#ifdef ASSERT_PDIR_SANITY
if (sba_check_pdir(ioc,"Check before sba_map_single()"))
panic("Sanity check failed");
#endif
#ifdef CONFIG_PROC_FS
ioc->msingle_calls++;
ioc->msingle_pages += size >> IOVP_SHIFT;
#endif
pide = sba_alloc_range(ioc, size);
iovp = (dma_addr_t) pide << IOVP_SHIFT;
DBG_RUN("%s() 0x%p -> 0x%lx\n",
__FUNCTION__, addr, (long) iovp | offset);
pdir_start = &(ioc->pdir_base[pide]);
while (size > 0) {
ASSERT(((u8 *)pdir_start)[7] == 0); /* verify availability */
sba_io_pdir_entry(pdir_start, (unsigned long) addr);
DBG_RUN(" pdir 0x%p %lx\n", pdir_start, *pdir_start);
addr += IOVP_SIZE;
size -= IOVP_SIZE;
pdir_start++;
}
/* form complete address */
#ifdef ASSERT_PDIR_SANITY
sba_check_pdir(ioc,"Check after sba_map_single()");
#endif
spin_unlock_irqrestore(&ioc->res_lock, flags);
return SBA_IOVA(ioc, iovp, offset, DEFAULT_DMA_HINT_REG);
}
/**
* sba_unmap_single - unmap one IOVA and free resources
* @dev: instance of PCI owned by the driver that's asking.
* @iova: IOVA of driver buffer previously mapped.
* @size: number of bytes mapped in driver buffer.
* @direction: R/W or both.
*
* See Documentation/DMA-mapping.txt
*/
void sba_unmap_single(struct pci_dev *dev, dma_addr_t iova, size_t size,
int direction)
{
struct ioc *ioc;
#if DELAYED_RESOURCE_CNT > 0
struct sba_dma_pair *d;
#endif
unsigned long flags;
dma_addr_t offset;
ioc = GET_IOC(dev);
ASSERT(ioc);
#ifdef ALLOW_IOV_BYPASS
if ((iova & ioc->imask) != ioc->ibase) {
/*
** Address does not fall w/in IOVA, must be bypassing
*/
#ifdef CONFIG_PROC_FS
spin_lock_irqsave(&ioc->res_lock, flags);
ioc->usingle_bypass++;
spin_unlock_irqrestore(&ioc->res_lock, flags);
#endif
DBG_BYPASS("sba_unmap_single() bypass addr: 0x%lx\n", iova);
#ifdef ENABLE_MARK_CLEAN
if (direction == PCI_DMA_FROMDEVICE) {
mark_clean(phys_to_virt(iova), size);
}
#endif
return;
}
#endif
offset = iova & ~IOVP_MASK;
DBG_RUN("%s() iovp 0x%lx/%x\n",
__FUNCTION__, (long) iova, size);
iova ^= offset; /* clear offset bits */
size += offset;
size = ROUNDUP(size, IOVP_SIZE);
spin_lock_irqsave(&ioc->res_lock, flags);
#ifdef CONFIG_PROC_FS
ioc->usingle_calls++;
ioc->usingle_pages += size >> IOVP_SHIFT;
#endif
#if DELAYED_RESOURCE_CNT > 0
d = &(ioc->saved[ioc->saved_cnt]);
d->iova = iova;
d->size = size;
if (++(ioc->saved_cnt) >= DELAYED_RESOURCE_CNT) {
int cnt = ioc->saved_cnt;
while (cnt--) {
sba_mark_invalid(ioc, d->iova, d->size);
sba_free_range(ioc, d->iova, d->size);
d--;
}
ioc->saved_cnt = 0;
READ_REG(ioc->ioc_hpa+IOC_PCOM); /* flush purges */
}
#else /* DELAYED_RESOURCE_CNT == 0 */
sba_mark_invalid(ioc, iova, size);
sba_free_range(ioc, iova, size);
READ_REG(ioc->ioc_hpa+IOC_PCOM); /* flush purges */
#endif /* DELAYED_RESOURCE_CNT == 0 */
#ifdef ENABLE_MARK_CLEAN
if (direction == PCI_DMA_FROMDEVICE) {
u32 iovp = (u32) SBA_IOVP(ioc,iova);
int off = PDIR_INDEX(iovp);
void *addr;
if (size <= IOVP_SIZE) {
addr = phys_to_virt(ioc->pdir_base[off] &
~0xE000000000000FFFULL);
mark_clean(addr, size);
} else {
size_t byte_cnt = size;
do {
addr = phys_to_virt(ioc->pdir_base[off] &
~0xE000000000000FFFULL);
mark_clean(addr, min(byte_cnt, IOVP_SIZE));
off++;
byte_cnt -= IOVP_SIZE;
} while (byte_cnt > 0);
}
}
#endif
spin_unlock_irqrestore(&ioc->res_lock, flags);
/* XXX REVISIT for 2.5 Linux - need syncdma for zero-copy support.
** For Astro based systems this isn't a big deal WRT performance.
** As long as 2.4 kernels copyin/copyout data from/to userspace,
** we don't need the syncdma. The issue here is I/O MMU cachelines
** are *not* coherent in all cases. May be hwrev dependent.
** Need to investigate more.
asm volatile("syncdma");
*/
}
/**
* sba_alloc_consistent - allocate/map shared mem for DMA
* @hwdev: instance of PCI owned by the driver that's asking.
* @size: number of bytes mapped in driver buffer.
* @dma_handle: IOVA of new buffer.
*
* See Documentation/DMA-mapping.txt
*/
void *
sba_alloc_consistent(struct pci_dev *hwdev, size_t size, dma_addr_t *dma_handle)
{
void *ret;
if (!hwdev) {
/* only support PCI */
*dma_handle = 0;
return 0;
}
ret = (void *) __get_free_pages(GFP_ATOMIC, get_order(size));
if (ret) {
memset(ret, 0, size);
*dma_handle = sba_map_single(hwdev, ret, size, 0);
}
return ret;
}
/**
* sba_free_consistent - free/unmap shared mem for DMA
* @hwdev: instance of PCI owned by the driver that's asking.
* @size: number of bytes mapped in driver buffer.
* @vaddr: virtual address IOVA of "consistent" buffer.
* @dma_handler: IO virtual address of "consistent" buffer.
*
* See Documentation/DMA-mapping.txt
*/
void sba_free_consistent(struct pci_dev *hwdev, size_t size, void *vaddr,
dma_addr_t dma_handle)
{
sba_unmap_single(hwdev, dma_handle, size, 0);
free_pages((unsigned long) vaddr, get_order(size));
}
/*
** Since 0 is a valid pdir_base index value, can't use that
** to determine if a value is valid or not. Use a flag to indicate
** the SG list entry contains a valid pdir index.
*/
#define PIDE_FLAG 0x1UL
#ifdef DEBUG_LARGE_SG_ENTRIES
int dump_run_sg = 0;
#endif
/**
* sba_fill_pdir - write allocated SG entries into IO PDIR
* @ioc: IO MMU structure which owns the pdir we are interested in.
* @startsg: list of IOVA/size pairs
* @nents: number of entries in startsg list
*
* Take preprocessed SG list and write corresponding entries
* in the IO PDIR.
*/
static SBA_INLINE int
sba_fill_pdir(
struct ioc *ioc,
struct scatterlist *startsg,
int nents)
{
struct scatterlist *dma_sg = startsg; /* pointer to current DMA */
int n_mappings = 0;
u64 *pdirp = 0;
unsigned long dma_offset = 0;
dma_sg--;
while (nents-- > 0) {
int cnt = sba_sg_len(startsg);
sba_sg_len(startsg) = 0;
#ifdef DEBUG_LARGE_SG_ENTRIES
if (dump_run_sg)
printk(" %2d : %08lx/%05x %p\n",
nents,
(unsigned long) sba_sg_iova(startsg), cnt,
sba_sg_buffer(startsg)
);
#else
DBG_RUN_SG(" %d : %08lx/%05x %p\n",
nents,
(unsigned long) sba_sg_iova(startsg), cnt,
sba_sg_buffer(startsg)
);
#endif
/*
** Look for the start of a new DMA stream
*/
if ((u64)sba_sg_iova(startsg) & PIDE_FLAG) {
u32 pide = (u64)sba_sg_iova(startsg) & ~PIDE_FLAG;
dma_offset = (unsigned long) pide & ~IOVP_MASK;
sba_sg_iova(startsg) = 0;
dma_sg++;
sba_sg_iova(dma_sg) = (char *)(pide | ioc->ibase);
pdirp = &(ioc->pdir_base[pide >> IOVP_SHIFT]);
n_mappings++;
}
/*
** Look for a VCONTIG chunk
*/
if (cnt) {
unsigned long vaddr = (unsigned long) sba_sg_buffer(startsg);
ASSERT(pdirp);
/* Since multiple Vcontig blocks could make up
** one DMA stream, *add* cnt to dma_len.
*/
sba_sg_len(dma_sg) += cnt;
cnt += dma_offset;
dma_offset=0; /* only want offset on first chunk */
cnt = ROUNDUP(cnt, IOVP_SIZE);
#ifdef CONFIG_PROC_FS
ioc->msg_pages += cnt >> IOVP_SHIFT;
#endif
do {
sba_io_pdir_entry(pdirp, vaddr);
vaddr += IOVP_SIZE;
cnt -= IOVP_SIZE;
pdirp++;
} while (cnt > 0);
}
startsg++;
}
#ifdef DEBUG_LARGE_SG_ENTRIES
dump_run_sg = 0;
#endif
return(n_mappings);
}
/*
** Two address ranges are DMA contiguous *iff* "end of prev" and
** "start of next" are both on a page boundry.
**
** (shift left is a quick trick to mask off upper bits)
*/
#define DMA_CONTIG(__X, __Y) \
(((((unsigned long) __X) | ((unsigned long) __Y)) << (BITS_PER_LONG - PAGE_SHIFT)) == 0UL)
/**
* sba_coalesce_chunks - preprocess the SG list
* @ioc: IO MMU structure which owns the pdir we are interested in.
* @startsg: list of IOVA/size pairs
* @nents: number of entries in startsg list
*
* First pass is to walk the SG list and determine where the breaks are
* in the DMA stream. Allocates PDIR entries but does not fill them.
* Returns the number of DMA chunks.
*
* Doing the fill seperate from the coalescing/allocation keeps the
* code simpler. Future enhancement could make one pass through
* the sglist do both.
*/
static SBA_INLINE int
sba_coalesce_chunks( struct ioc *ioc,
struct scatterlist *startsg,
int nents)
{
struct scatterlist *vcontig_sg; /* VCONTIG chunk head */
unsigned long vcontig_len; /* len of VCONTIG chunk */
unsigned long vcontig_end;
struct scatterlist *dma_sg; /* next DMA stream head */
unsigned long dma_offset, dma_len; /* start/len of DMA stream */
int n_mappings = 0;
while (nents > 0) {
unsigned long vaddr = (unsigned long) (startsg->address);
/*
** Prepare for first/next DMA stream
*/
dma_sg = vcontig_sg = startsg;
dma_len = vcontig_len = vcontig_end = sba_sg_len(startsg);
vcontig_end += vaddr;
dma_offset = vaddr & ~IOVP_MASK;
/* PARANOID: clear entries */
sba_sg_buffer(startsg) = sba_sg_iova(startsg);
sba_sg_iova(startsg) = 0;
sba_sg_len(startsg) = 0;
/*
** This loop terminates one iteration "early" since
** it's always looking one "ahead".
*/
while (--nents > 0) {
unsigned long vaddr; /* tmp */
startsg++;
/* catch brokenness in SCSI layer */
ASSERT(startsg->length <= DMA_CHUNK_SIZE);
/*
** First make sure current dma stream won't
** exceed DMA_CHUNK_SIZE if we coalesce the
** next entry.
*/
if (((dma_len + dma_offset + startsg->length + ~IOVP_MASK) & IOVP_MASK) > DMA_CHUNK_SIZE)
break;
/*
** Then look for virtually contiguous blocks.
**
** append the next transaction?
*/
vaddr = (unsigned long) sba_sg_iova(startsg);
if (vcontig_end == vaddr)
{
vcontig_len += sba_sg_len(startsg);
vcontig_end += sba_sg_len(startsg);
dma_len += sba_sg_len(startsg);
sba_sg_buffer(startsg) = (char *)vaddr;
sba_sg_iova(startsg) = 0;
sba_sg_len(startsg) = 0;
continue;
}
#ifdef DEBUG_LARGE_SG_ENTRIES
dump_run_sg = (vcontig_len > IOVP_SIZE);
#endif
/*
** Not virtually contigous.
** Terminate prev chunk.
** Start a new chunk.
**
** Once we start a new VCONTIG chunk, dma_offset
** can't change. And we need the offset from the first
** chunk - not the last one. Ergo Successive chunks
** must start on page boundaries and dove tail
** with it's predecessor.
*/
sba_sg_len(vcontig_sg) = vcontig_len;
vcontig_sg = startsg;
vcontig_len = sba_sg_len(startsg);
/*
** 3) do the entries end/start on page boundaries?
** Don't update vcontig_end until we've checked.
*/
if (DMA_CONTIG(vcontig_end, vaddr))
{
vcontig_end = vcontig_len + vaddr;
dma_len += vcontig_len;
sba_sg_buffer(startsg) = (char *)vaddr;
sba_sg_iova(startsg) = 0;
continue;
} else {
break;
}
}
/*
** End of DMA Stream
** Terminate last VCONTIG block.
** Allocate space for DMA stream.
*/
sba_sg_len(vcontig_sg) = vcontig_len;
dma_len = (dma_len + dma_offset + ~IOVP_MASK) & IOVP_MASK;
ASSERT(dma_len <= DMA_CHUNK_SIZE);
sba_sg_iova(dma_sg) = (char *) (PIDE_FLAG
| (sba_alloc_range(ioc, dma_len) << IOVP_SHIFT)
| dma_offset);
n_mappings++;
}
return n_mappings;
}
/**
* sba_map_sg - map Scatter/Gather list
* @dev: instance of PCI owned by the driver that's asking.
* @sglist: array of buffer/length pairs
* @nents: number of entries in list
* @direction: R/W or both.
*
* See Documentation/DMA-mapping.txt
*/
int sba_map_sg(struct pci_dev *dev, struct scatterlist *sglist, int nents,
int direction)
{
struct ioc *ioc;
int coalesced, filled = 0;
unsigned long flags;
#ifdef ALLOW_IOV_BYPASS
struct scatterlist *sg;
#endif
DBG_RUN_SG("%s() START %d entries\n", __FUNCTION__, nents);
ioc = GET_IOC(dev);
ASSERT(ioc);
#ifdef ALLOW_IOV_BYPASS
if (dev->dma_mask >= ioc->dma_mask) {
for (sg = sglist ; filled < nents ; filled++, sg++){
sba_sg_buffer(sg) = sba_sg_iova(sg);
sba_sg_iova(sg) = (char *)virt_to_phys(sba_sg_buffer(sg));
}
#ifdef CONFIG_PROC_FS
spin_lock_irqsave(&ioc->res_lock, flags);
ioc->msg_bypass++;
spin_unlock_irqrestore(&ioc->res_lock, flags);
#endif
return filled;
}
#endif
/* Fast path single entry scatterlists. */
if (nents == 1) {
sba_sg_buffer(sglist) = sba_sg_iova(sglist);
sba_sg_iova(sglist) = (char *)sba_map_single(dev,
sba_sg_buffer(sglist),
sba_sg_len(sglist), direction);
#ifdef CONFIG_PROC_FS
/*
** Should probably do some stats counting, but trying to
** be precise quickly starts wasting CPU time.
*/
#endif
return 1;
}
spin_lock_irqsave(&ioc->res_lock, flags);
#ifdef ASSERT_PDIR_SANITY
if (sba_check_pdir(ioc,"Check before sba_map_sg()"))
{
sba_dump_sg(ioc, sglist, nents);
panic("Check before sba_map_sg()");
}
#endif
#ifdef CONFIG_PROC_FS
ioc->msg_calls++;
#endif
/*
** First coalesce the chunks and allocate I/O pdir space
**
** If this is one DMA stream, we can properly map using the
** correct virtual address associated with each DMA page.
** w/o this association, we wouldn't have coherent DMA!
** Access to the virtual address is what forces a two pass algorithm.
*/
coalesced = sba_coalesce_chunks(ioc, sglist, nents);
/*
** Program the I/O Pdir
**
** map the virtual addresses to the I/O Pdir
** o dma_address will contain the pdir index
** o dma_len will contain the number of bytes to map
** o address contains the virtual address.
*/
filled = sba_fill_pdir(ioc, sglist, nents);
#ifdef ASSERT_PDIR_SANITY
if (sba_check_pdir(ioc,"Check after sba_map_sg()"))
{
sba_dump_sg(ioc, sglist, nents);
panic("Check after sba_map_sg()\n");
}
#endif
spin_unlock_irqrestore(&ioc->res_lock, flags);
ASSERT(coalesced == filled);
DBG_RUN_SG("%s() DONE %d mappings\n", __FUNCTION__, filled);
return filled;
}
/**
* sba_unmap_sg - unmap Scatter/Gather list
* @dev: instance of PCI owned by the driver that's asking.
* @sglist: array of buffer/length pairs
* @nents: number of entries in list
* @direction: R/W or both.
*
* See Documentation/DMA-mapping.txt
*/
void sba_unmap_sg(struct pci_dev *dev, struct scatterlist *sglist, int nents,
int direction)
{
struct ioc *ioc;
#ifdef ASSERT_PDIR_SANITY
unsigned long flags;
#endif
DBG_RUN_SG("%s() START %d entries, %p,%x\n",
__FUNCTION__, nents, sba_sg_buffer(sglist), sglist->length);
ioc = GET_IOC(dev);
ASSERT(ioc);
#ifdef CONFIG_PROC_FS
ioc->usg_calls++;
#endif
#ifdef ASSERT_PDIR_SANITY
spin_lock_irqsave(&ioc->res_lock, flags);
sba_check_pdir(ioc,"Check before sba_unmap_sg()");
spin_unlock_irqrestore(&ioc->res_lock, flags);
#endif
while (sba_sg_len(sglist) && nents--) {
sba_unmap_single(dev, (dma_addr_t)sba_sg_iova(sglist),
sba_sg_len(sglist), direction);
#ifdef CONFIG_PROC_FS
/*
** This leaves inconsistent data in the stats, but we can't
** tell which sg lists were mapped by map_single and which
** were coalesced to a single entry. The stats are fun,
** but speed is more important.
*/
ioc->usg_pages += (((u64)sba_sg_iova(sglist) & ~IOVP_MASK) + sba_sg_len(sglist) + IOVP_SIZE - 1) >> PAGE_SHIFT;
#endif
++sglist;
}
DBG_RUN_SG("%s() DONE (nents %d)\n", __FUNCTION__, nents);
#ifdef ASSERT_PDIR_SANITY
spin_lock_irqsave(&ioc->res_lock, flags);
sba_check_pdir(ioc,"Check after sba_unmap_sg()");
spin_unlock_irqrestore(&ioc->res_lock, flags);
#endif
}
unsigned long
sba_dma_address (struct scatterlist *sg)
{
return ((unsigned long)sba_sg_iova(sg));
}
/**************************************************************
*
* Initialization and claim
*
***************************************************************/
static void
sba_ioc_init(struct sba_device *sba_dev, struct ioc *ioc, int ioc_num)
{
u32 iova_space_size, iova_space_mask;
void * pdir_base;
int pdir_size, iov_order, tcnfg;
/*
** Firmware programs the maximum IOV space size into the imask reg
*/
iova_space_size = ~(READ_REG(ioc->ioc_hpa + IOC_IMASK) & 0xFFFFFFFFUL) + 1;
#ifdef CONFIG_IA64_HP_PROTO
if (!iova_space_size)
iova_space_size = GB(1);
#endif
/*
** iov_order is always based on a 1GB IOVA space since we want to
** turn on the other half for AGP GART.
*/
iov_order = get_order(iova_space_size >> (IOVP_SHIFT-PAGE_SHIFT));
ioc->pdir_size = pdir_size = (iova_space_size/IOVP_SIZE) * sizeof(u64);
DBG_INIT("%s() hpa 0x%lx IOV %dMB (%d bits) PDIR size 0x%0x\n",
__FUNCTION__, ioc->ioc_hpa, iova_space_size>>20,
iov_order + PAGE_SHIFT, ioc->pdir_size);
/* FIXME : DMA HINTs not used */
ioc->hint_shift_pdir = iov_order + PAGE_SHIFT;
ioc->hint_mask_pdir = ~(0x3 << (iov_order + PAGE_SHIFT));
ioc->pdir_base =
pdir_base = (void *) __get_free_pages(GFP_KERNEL, get_order(pdir_size));
if (NULL == pdir_base)
{
panic(__FILE__ ":%s() could not allocate I/O Page Table\n", __FUNCTION__);
}
memset(pdir_base, 0, pdir_size);
DBG_INIT("%s() pdir %p size %x hint_shift_pdir %x hint_mask_pdir %lx\n",
__FUNCTION__, pdir_base, pdir_size,
ioc->hint_shift_pdir, ioc->hint_mask_pdir);
ASSERT((((unsigned long) pdir_base) & PAGE_MASK) == (unsigned long) pdir_base);
WRITE_REG(virt_to_phys(pdir_base), ioc->ioc_hpa + IOC_PDIR_BASE);
DBG_INIT(" base %p\n", pdir_base);
/* build IMASK for IOC and Elroy */
iova_space_mask = 0xffffffff;
iova_space_mask <<= (iov_order + PAGE_SHIFT);
#ifdef CONFIG_IA64_HP_PROTO
/*
** REVISIT - this is a kludge, but we won't be supporting anything but
** zx1 2.0 or greater for real. When fw is in shape, ibase will
** be preprogrammed w/ the IOVA hole base and imask will give us
** the size.
*/
if ((sba_dev->hw_rev & 0xFF) < 0x20) {
DBG_INIT("%s() Found SBA rev < 2.0, setting IOVA base to 0. This device will not be supported in the future.\n", __FUNCTION__);
ioc->ibase = 0x0;
} else
#endif
ioc->ibase = READ_REG(ioc->ioc_hpa + IOC_IBASE) & 0xFFFFFFFEUL;
ioc->imask = iova_space_mask; /* save it */
DBG_INIT("%s() IOV base 0x%lx mask 0x%0lx\n",
__FUNCTION__, ioc->ibase, ioc->imask);
/*
** FIXME: Hint registers are programmed with default hint
** values during boot, so hints should be sane even if we
** can't reprogram them the way drivers want.
*/
WRITE_REG(ioc->imask, ioc->ioc_hpa+IOC_IMASK);
/*
** Setting the upper bits makes checking for bypass addresses
** a little faster later on.
*/
ioc->imask |= 0xFFFFFFFF00000000UL;
/* Set I/O PDIR Page size to system page size */
switch (PAGE_SHIFT) {
case 12: /* 4K */
tcnfg = 0;
break;
case 13: /* 8K */
tcnfg = 1;
break;
case 14: /* 16K */
tcnfg = 2;
break;
case 16: /* 64K */
tcnfg = 3;
break;
}
WRITE_REG(tcnfg, ioc->ioc_hpa+IOC_TCNFG);
/*
** Program the IOC's ibase and enable IOVA translation
** Bit zero == enable bit.
*/
WRITE_REG(ioc->ibase | 1, ioc->ioc_hpa+IOC_IBASE);
/*
** Clear I/O TLB of any possible entries.
** (Yes. This is a bit paranoid...but so what)
*/
WRITE_REG(0 | 31, ioc->ioc_hpa+IOC_PCOM);
/*
** If an AGP device is present, only use half of the IOV space
** for PCI DMA. Unfortunately we can't know ahead of time
** whether GART support will actually be used, for now we
** can just key on an AGP device found in the system.
** We program the next pdir index after we stop w/ a key for
** the GART code to handshake on.
*/
if (SBA_GET_AGP(sba_dev)) {
DBG_INIT("%s() AGP Device found, reserving 512MB for GART support\n", __FUNCTION__);
ioc->pdir_size /= 2;
((u64 *)pdir_base)[PDIR_INDEX(iova_space_size/2)] = 0x0000badbadc0ffeeULL;
}
DBG_INIT("%s() DONE\n", __FUNCTION__);
}
/**************************************************************************
**
** SBA initialization code (HW and SW)
**
** o identify SBA chip itself
** o FIXME: initialize DMA hints for reasonable defaults
**
**************************************************************************/
static void
sba_hw_init(struct sba_device *sba_dev)
{
int i;
int num_ioc;
u64 dma_mask;
u32 func_id;
/*
** Identify the SBA so we can set the dma_mask. We can make a virtual
** dma_mask of the memory subsystem such that devices not implmenting
** a full 64bit mask might still be able to bypass efficiently.
*/
func_id = READ_REG(sba_dev->sba_hpa + SBA_FUNC_ID);
if (func_id == ZX1_FUNC_ID_VALUE) {
dma_mask = 0xFFFFFFFFFFUL;
} else {
dma_mask = 0xFFFFFFFFFFFFFFFFUL;
}
DBG_INIT("%s(): ioc->dma_mask == 0x%lx\n", __FUNCTION__, dma_mask);
/*
** Leaving in the multiple ioc code from parisc for the future,
** currently there are no muli-ioc mckinley sbas
*/
sba_dev->ioc[0].ioc_hpa = SBA_IOC_OFFSET;
num_ioc = 1;
sba_dev->num_ioc = num_ioc;
for (i = 0; i < num_ioc; i++) {
sba_dev->ioc[i].dma_mask = dma_mask;
sba_dev->ioc[i].ioc_hpa += sba_dev->sba_hpa;
sba_ioc_init(sba_dev, &(sba_dev->ioc[i]), i);
}
}
static void
sba_common_init(struct sba_device *sba_dev)
{
int i;
/* add this one to the head of the list (order doesn't matter)
** This will be useful for debugging - especially if we get coredumps
*/
sba_dev->next = sba_list;
sba_list = sba_dev;
sba_count++;
for(i=0; i< sba_dev->num_ioc; i++) {
int res_size;
/* resource map size dictated by pdir_size */
res_size = sba_dev->ioc[i].pdir_size/sizeof(u64); /* entries */
res_size >>= 3; /* convert bit count to byte count */
DBG_INIT("%s() res_size 0x%x\n",
__FUNCTION__, res_size);
sba_dev->ioc[i].res_size = res_size;
sba_dev->ioc[i].res_map = (char *) __get_free_pages(GFP_KERNEL, get_order(res_size));
if (NULL == sba_dev->ioc[i].res_map)
{
panic(__FILE__ ":%s() could not allocate resource map\n", __FUNCTION__ );
}
memset(sba_dev->ioc[i].res_map, 0, res_size);
/* next available IOVP - circular search */
if ((sba_dev->hw_rev & 0xFF) >= 0x20) {
sba_dev->ioc[i].res_hint = (unsigned long *)
sba_dev->ioc[i].res_map;
} else {
u64 reserved_iov;
/* Yet another 1.x hack */
printk("zx1 1.x: Starting resource hint offset into IOV space to avoid initial zero value IOVA\n");
sba_dev->ioc[i].res_hint = (unsigned long *)
&(sba_dev->ioc[i].res_map[L1_CACHE_BYTES]);
sba_dev->ioc[i].res_map[0] = 0x1;
sba_dev->ioc[i].pdir_base[0] = 0x8000badbadc0ffeeULL;
for (reserved_iov = 0xA0000 ; reserved_iov < 0xC0000 ; reserved_iov += IOVP_SIZE) {
u64 *res_ptr = sba_dev->ioc[i].res_map;
int index = PDIR_INDEX(reserved_iov);
int res_word;
u64 mask;
res_word = (int)(index / BITS_PER_LONG);
mask = 0x1UL << (index - (res_word * BITS_PER_LONG));
res_ptr[res_word] |= mask;
sba_dev->ioc[i].pdir_base[PDIR_INDEX(reserved_iov)] = (0x80000000000000FFULL | reserved_iov);
}
}
#ifdef ASSERT_PDIR_SANITY
/* Mark first bit busy - ie no IOVA 0 */
sba_dev->ioc[i].res_map[0] = 0x1;
sba_dev->ioc[i].pdir_base[0] = 0x8000badbadc0ffeeULL;
#endif
DBG_INIT("%s() %d res_map %x %p\n", __FUNCTION__,
i, res_size, (void *)sba_dev->ioc[i].res_map);
}
sba_dev->sba_lock = SPIN_LOCK_UNLOCKED;
}
#ifdef CONFIG_PROC_FS
static int sba_proc_info(char *buf, char **start, off_t offset, int len)
{
struct sba_device *sba_dev = sba_list;
struct ioc *ioc = &sba_dev->ioc[0]; /* FIXME: Multi-IOC support! */
int total_pages = (int) (ioc->res_size << 3); /* 8 bits per byte */
unsigned long i = 0, avg = 0, min, max;
sprintf(buf, "%s rev %d.%d\n",
"Hewlett Packard zx1 SBA",
((sba_dev->hw_rev >> 4) & 0xF),
(sba_dev->hw_rev & 0xF)
);
sprintf(buf, "%sIO PDIR size : %d bytes (%d entries)\n",
buf,
(int) ((ioc->res_size << 3) * sizeof(u64)), /* 8 bits/byte */
total_pages);
sprintf(buf, "%sIO PDIR entries : %ld free %ld used (%d%%)\n", buf,
total_pages - ioc->used_pages, ioc->used_pages,
(int) (ioc->used_pages * 100 / total_pages));
sprintf(buf, "%sResource bitmap : %d bytes (%d pages)\n",
buf, ioc->res_size, ioc->res_size << 3); /* 8 bits per byte */
min = max = ioc->avg_search[0];
for (i = 0; i < SBA_SEARCH_SAMPLE; i++) {
avg += ioc->avg_search[i];
if (ioc->avg_search[i] > max) max = ioc->avg_search[i];
if (ioc->avg_search[i] < min) min = ioc->avg_search[i];
}
avg /= SBA_SEARCH_SAMPLE;
sprintf(buf, "%s Bitmap search : %ld/%ld/%ld (min/avg/max CPU Cycles)\n",
buf, min, avg, max);
sprintf(buf, "%spci_map_single(): %12ld calls %12ld pages (avg %d/1000)\n",
buf, ioc->msingle_calls, ioc->msingle_pages,
(int) ((ioc->msingle_pages * 1000)/ioc->msingle_calls));
#ifdef ALLOW_IOV_BYPASS
sprintf(buf, "%spci_map_single(): %12ld bypasses\n",
buf, ioc->msingle_bypass);
#endif
sprintf(buf, "%spci_unmap_single: %12ld calls %12ld pages (avg %d/1000)\n",
buf, ioc->usingle_calls, ioc->usingle_pages,
(int) ((ioc->usingle_pages * 1000)/ioc->usingle_calls));
#ifdef ALLOW_IOV_BYPASS
sprintf(buf, "%spci_unmap_single: %12ld bypasses\n",
buf, ioc->usingle_bypass);
#endif
sprintf(buf, "%spci_map_sg() : %12ld calls %12ld pages (avg %d/1000)\n",
buf, ioc->msg_calls, ioc->msg_pages,
(int) ((ioc->msg_pages * 1000)/ioc->msg_calls));
#ifdef ALLOW_IOV_BYPASS
sprintf(buf, "%spci_map_sg() : %12ld bypasses\n",
buf, ioc->msg_bypass);
#endif
sprintf(buf, "%spci_unmap_sg() : %12ld calls %12ld pages (avg %d/1000)\n",
buf, ioc->usg_calls, ioc->usg_pages,
(int) ((ioc->usg_pages * 1000)/ioc->usg_calls));
return strlen(buf);
}
static int
sba_resource_map(char *buf, char **start, off_t offset, int len)
{
struct ioc *ioc = sba_list->ioc; /* FIXME: Multi-IOC support! */
unsigned int *res_ptr = (unsigned int *)ioc->res_map;
int i;
buf[0] = '\0';
for(i = 0; i < (ioc->res_size / sizeof(unsigned int)); ++i, ++res_ptr) {
if ((i & 7) == 0)
strcat(buf,"\n ");
sprintf(buf, "%s %08x", buf, *res_ptr);
}
strcat(buf, "\n");
return strlen(buf);
}
#endif
/*
** Determine if sba should claim this chip (return 0) or not (return 1).
** If so, initialize the chip and tell other partners in crime they
** have work to do.
*/
void __init sba_init(void)
{
struct sba_device *sba_dev;
u32 func_id, hw_rev;
u32 *func_offset = NULL;
int i, agp_found = 0;
static char sba_rev[6];
struct pci_dev *device = NULL;
u64 hpa = 0;
if (!(device = pci_find_device(PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_ZX1_SBA, NULL)))
return;
for (i = 0; i < PCI_NUM_RESOURCES; i++) {
if (pci_resource_flags(device, i) == IORESOURCE_MEM) {
hpa = ioremap(pci_resource_start(device, i),
pci_resource_len(device, i));
break;
}
}
func_id = READ_REG(hpa + SBA_FUNC_ID);
if (func_id == ZX1_FUNC_ID_VALUE) {
(void)strcpy(sba_rev, "zx1");
func_offset = zx1_func_offsets;
} else {
return;
}
/* Read HW Rev First */
hw_rev = READ_REG(hpa + SBA_FCLASS) & 0xFFUL;
/*
* Not all revision registers of the chipset are updated on every
* turn. Must scan through all functions looking for the highest rev
*/
if (func_offset) {
for (i = 0 ; func_offset[i] != -1 ; i++) {
u32 func_rev;
func_rev = READ_REG(hpa + SBA_FCLASS + func_offset[i]) & 0xFFUL;
DBG_INIT("%s() func offset: 0x%x rev: 0x%x\n",
__FUNCTION__, func_offset[i], func_rev);
if (func_rev > hw_rev)
hw_rev = func_rev;
}
}
printk(KERN_INFO "%s found %s %d.%d at %s, HPA 0x%lx\n", DRIVER_NAME,
sba_rev, ((hw_rev >> 4) & 0xF), (hw_rev & 0xF),
device->slot_name, hpa);
if ((hw_rev & 0xFF) < 0x20) {
printk(KERN_INFO "%s WARNING rev 2.0 or greater will be required for IO MMU support in the future\n", DRIVER_NAME);
#ifndef CONFIG_IA64_HP_PROTO
panic("%s: CONFIG_IA64_HP_PROTO MUST be enabled to support SBA rev less than 2.0", DRIVER_NAME);
#endif
}
sba_dev = kmalloc(sizeof(struct sba_device), GFP_KERNEL);
if (NULL == sba_dev) {
printk(KERN_ERR DRIVER_NAME " - couldn't alloc sba_device\n");
return;
}
memset(sba_dev, 0, sizeof(struct sba_device));
for(i=0; i<MAX_IOC; i++)
spin_lock_init(&(sba_dev->ioc[i].res_lock));
sba_dev->hw_rev = hw_rev;
sba_dev->sba_hpa = hpa;
/* /*
* We need to check for an AGP device, if we find one, then only * We need to check for an AGP device, if we find one, then only
......
...@@ -42,7 +42,7 @@ struct fake_pci_dev { ...@@ -42,7 +42,7 @@ struct fake_pci_dev {
static struct fake_pci_dev *fake_pci_head, **fake_pci_tail = &fake_pci_head; static struct fake_pci_dev *fake_pci_head, **fake_pci_tail = &fake_pci_head;
static struct pci_ops orig_pci_ops; static struct pci_ops *orig_pci_ops;
static inline struct fake_pci_dev * static inline struct fake_pci_dev *
fake_pci_find_slot(unsigned char bus, unsigned int devfn) fake_pci_find_slot(unsigned char bus, unsigned int devfn)
...@@ -77,7 +77,7 @@ static int hp_cfg_read##sz (struct pci_dev *dev, int where, u##bits *value) \ ...@@ -77,7 +77,7 @@ static int hp_cfg_read##sz (struct pci_dev *dev, int where, u##bits *value) \
{ \ { \
struct fake_pci_dev *fake_dev; \ struct fake_pci_dev *fake_dev; \
if (!(fake_dev = fake_pci_find_slot(dev->bus->number, dev->devfn))) \ if (!(fake_dev = fake_pci_find_slot(dev->bus->number, dev->devfn))) \
return orig_pci_ops.name(dev, where, value); \ return orig_pci_ops->name(dev, where, value); \
\ \
switch (where) { \ switch (where) { \
case PCI_COMMAND: \ case PCI_COMMAND: \
...@@ -105,7 +105,7 @@ static int hp_cfg_write##sz (struct pci_dev *dev, int where, u##bits value) \ ...@@ -105,7 +105,7 @@ static int hp_cfg_write##sz (struct pci_dev *dev, int where, u##bits value) \
{ \ { \
struct fake_pci_dev *fake_dev; \ struct fake_pci_dev *fake_dev; \
if (!(fake_dev = fake_pci_find_slot(dev->bus->number, dev->devfn))) \ if (!(fake_dev = fake_pci_find_slot(dev->bus->number, dev->devfn))) \
return orig_pci_ops.name(dev, where, value); \ return orig_pci_ops->name(dev, where, value); \
\ \
switch (where) { \ switch (where) { \
case PCI_BASE_ADDRESS_0: \ case PCI_BASE_ADDRESS_0: \
...@@ -295,7 +295,7 @@ hpzx1_lba_probe(acpi_handle obj, u32 depth, void *context, void **ret) ...@@ -295,7 +295,7 @@ hpzx1_lba_probe(acpi_handle obj, u32 depth, void *context, void **ret)
if (status != AE_OK) if (status != AE_OK)
return status; return status;
status = acpi_cf_evaluate_method(obj, METHOD_NAME__BBN, &busnum); status = acpi_evaluate_integer(obj, METHOD_NAME__BBN, NULL, &busnum);
if (ACPI_FAILURE(status)) { if (ACPI_FAILURE(status)) {
printk(KERN_ERR PFX "evaluate _BBN fail=0x%x\n", status); printk(KERN_ERR PFX "evaluate _BBN fail=0x%x\n", status);
busnum = 0; // no _BBN; stick it on bus 0 busnum = 0; // no _BBN; stick it on bus 0
...@@ -313,7 +313,7 @@ hpzx1_lba_probe(acpi_handle obj, u32 depth, void *context, void **ret) ...@@ -313,7 +313,7 @@ hpzx1_lba_probe(acpi_handle obj, u32 depth, void *context, void **ret)
static void static void
hpzx1_acpi_dev_init(void) hpzx1_acpi_dev_init(void)
{ {
extern struct pci_ops pci_conf; extern struct pci_ops *pci_root_ops;
/* /*
* Make fake PCI devices for the following hardware in the * Make fake PCI devices for the following hardware in the
...@@ -383,8 +383,8 @@ hpzx1_acpi_dev_init(void) ...@@ -383,8 +383,8 @@ hpzx1_acpi_dev_init(void)
/* /*
* Replace PCI ops, but only if we made fake devices. * Replace PCI ops, but only if we made fake devices.
*/ */
orig_pci_ops = pci_conf; orig_pci_ops = pci_root_ops;
pci_conf = hp_pci_conf; pci_root_ops = &hp_pci_conf;
} }
extern void sba_init(void); extern void sba_init(void);
......
...@@ -56,18 +56,43 @@ asm (".weak iosapic_version"); ...@@ -56,18 +56,43 @@ asm (".weak iosapic_version");
void (*pm_idle) (void); void (*pm_idle) (void);
void (*pm_power_off) (void); void (*pm_power_off) (void);
/*
* TBD: Should go away once we have an ACPI parser.
*/
const char * const char *
acpi_get_sysname (void) acpi_get_sysname (void)
{ {
#ifdef CONFIG_IA64_GENERIC #ifdef CONFIG_IA64_GENERIC
return "hpsim"; unsigned long rsdp_phys = 0;
struct acpi20_table_rsdp *rsdp;
struct acpi_table_xsdt *xsdt;
struct acpi_table_header *hdr;
if ((0 != acpi_find_rsdp(&rsdp_phys)) || !rsdp_phys) {
printk("ACPI 2.0 RSDP not found, default to \"dig\"\n");
return "dig";
}
rsdp = (struct acpi20_table_rsdp *) __va(rsdp_phys);
if (strncmp(rsdp->signature, RSDP_SIG, sizeof(RSDP_SIG) - 1)) {
printk("ACPI 2.0 RSDP signature incorrect, default to \"dig\"\n");
return "dig";
}
xsdt = (struct acpi_table_xsdt *) __va(rsdp->xsdt_address);
hdr = &xsdt->header;
if (strncmp(hdr->signature, XSDT_SIG, sizeof(XSDT_SIG) - 1)) {
printk("ACPI 2.0 XSDT signature incorrect, default to \"dig\"\n");
return "dig";
}
if (!strcmp(hdr->oem_id, "HP")) {
return "hpzx1";
}
return "dig";
#else #else
# if defined (CONFIG_IA64_HP_SIM) # if defined (CONFIG_IA64_HP_SIM)
return "hpsim"; return "hpsim";
# elif defined (CONFIG_IA64_HP_ZX1)
return "hpzx1";
# elif defined (CONFIG_IA64_SGI_SN1) # elif defined (CONFIG_IA64_SGI_SN1)
return "sn1"; return "sn1";
# elif defined (CONFIG_IA64_SGI_SN2) # elif defined (CONFIG_IA64_SGI_SN2)
...@@ -80,6 +105,69 @@ acpi_get_sysname (void) ...@@ -80,6 +105,69 @@ acpi_get_sysname (void)
#endif #endif
} }
#ifdef CONFIG_ACPI
/**
* acpi_get_crs - Return the current resource settings for a device
* obj: A handle for this device
* buf: A buffer to be populated by this call.
*
* Pass a valid handle, typically obtained by walking the namespace and a
* pointer to an allocated buffer, and this function will fill in the buffer
* with a list of acpi_resource structures.
*/
acpi_status
acpi_get_crs (acpi_handle obj, acpi_buffer *buf)
{
acpi_status result;
buf->length = 0;
buf->pointer = NULL;
result = acpi_get_current_resources(obj, buf);
if (result != AE_BUFFER_OVERFLOW)
return result;
buf->pointer = kmalloc(buf->length, GFP_KERNEL);
if (!buf->pointer)
return -ENOMEM;
result = acpi_get_current_resources(obj, buf);
return result;
}
acpi_resource *
acpi_get_crs_next (acpi_buffer *buf, int *offset)
{
acpi_resource *res;
if (*offset >= buf->length)
return NULL;
res = buf->pointer + *offset;
*offset += res->length;
return res;
}
acpi_resource_data *
acpi_get_crs_type (acpi_buffer *buf, int *offset, int type)
{
for (;;) {
acpi_resource *res = acpi_get_crs_next(buf, offset);
if (!res)
return NULL;
if (res->id == type)
return &res->data;
}
}
void
acpi_dispose_crs (acpi_buffer *buf)
{
kfree(buf->pointer);
}
#endif /* CONFIG_ACPI */
#ifdef CONFIG_ACPI_BOOT #ifdef CONFIG_ACPI_BOOT
#define ACPI_MAX_PLATFORM_IRQS 256 #define ACPI_MAX_PLATFORM_IRQS 256
......
...@@ -23,6 +23,7 @@ ...@@ -23,6 +23,7 @@
* iosapic_set_affinity(), initializations for * iosapic_set_affinity(), initializations for
* /proc/irq/#/smp_affinity * /proc/irq/#/smp_affinity
* 02/04/02 P. Diefenbaugh Cleaned up ACPI PCI IRQ routing. * 02/04/02 P. Diefenbaugh Cleaned up ACPI PCI IRQ routing.
* 02/04/18 J.I. Lee bug fix in iosapic_init_pci_irq
*/ */
/* /*
* Here is what the interrupt logic between a PCI device and the CPU looks like: * Here is what the interrupt logic between a PCI device and the CPU looks like:
...@@ -70,7 +71,7 @@ ...@@ -70,7 +71,7 @@
#undef DEBUG_IRQ_ROUTING #undef DEBUG_IRQ_ROUTING
#undef OVERRIDE_DEBUG #undef OVERRIDE_DEBUG
static spinlock_t iosapic_lock = SPIN_LOCK_UNLOCKED; static spinlock_t iosapic_lock = SPIN_LOCK_UNLOCKED;
...@@ -676,6 +677,11 @@ iosapic_init_pci_irq (void) ...@@ -676,6 +677,11 @@ iosapic_init_pci_irq (void)
pci_irq.route[i].bus, pci_irq.route[i].pci_id>>16, pci_irq.route[i].pin, pci_irq.route[i].bus, pci_irq.route[i].pci_id>>16, pci_irq.route[i].pin,
iosapic_irq[vector].base_irq + iosapic_irq[vector].pin, vector); iosapic_irq[vector].base_irq + iosapic_irq[vector].pin, vector);
#endif #endif
/*
* Forget not to program the IOSAPIC RTE per ACPI _PRT
*/
set_rte(vector, (ia64_get_lid() >> 16) & 0xffff);
} }
} }
......
...@@ -186,6 +186,10 @@ ia64_bad_break (unsigned long break_num, struct pt_regs *regs) ...@@ -186,6 +186,10 @@ ia64_bad_break (unsigned long break_num, struct pt_regs *regs)
sig = SIGSEGV; code = __SEGV_PSTKOVF; sig = SIGSEGV; code = __SEGV_PSTKOVF;
break; break;
case 0x3f000 ... 0x3ffff: /* bundle-update in progress */
sig = SIGILL; code = __ILL_BNDMOD;
break;
default: default:
if (break_num < 0x40000 || break_num > 0x100000) if (break_num < 0x40000 || break_num > 0x100000)
die_if_kernel("Bad break", regs, break_num); die_if_kernel("Bad break", regs, break_num);
......
...@@ -30,6 +30,7 @@ ...@@ -30,6 +30,7 @@
#define tgt2 r23 #define tgt2 r23
#define srcf r24 #define srcf r24
#define tgtf r25 #define tgtf r25
#define tgt_last r26
#define Nrot ((8*PIPE_DEPTH+7)&~7) #define Nrot ((8*PIPE_DEPTH+7)&~7)
...@@ -55,18 +56,21 @@ GLOBAL_ENTRY(copy_page) ...@@ -55,18 +56,21 @@ GLOBAL_ENTRY(copy_page)
mov src1=in1 mov src1=in1
adds src2=8,in1 adds src2=8,in1
mov tgt_last = PAGE_SIZE
;; ;;
adds tgt2=8,in0 adds tgt2=8,in0
add srcf=512,in1 add srcf=512,in1
mov ar.lc=lcount mov ar.lc=lcount
mov tgt1=in0 mov tgt1=in0
add tgtf=512,in0 add tgtf=512,in0
add tgt_last = tgt_last, in0
;; ;;
1: 1:
(p[0]) ld8 t1[0]=[src1],16 (p[0]) ld8 t1[0]=[src1],16
(EPI) st8 [tgt1]=t1[PIPE_DEPTH-1],16 (EPI) st8 [tgt1]=t1[PIPE_DEPTH-1],16
(p[0]) ld8 t2[0]=[src2],16 (p[0]) ld8 t2[0]=[src2],16
(EPI) st8 [tgt2]=t2[PIPE_DEPTH-1],16 (EPI) st8 [tgt2]=t2[PIPE_DEPTH-1],16
cmp.ltu p6,p0 = tgtf, tgt_last
;; ;;
(p[0]) ld8 t3[0]=[src1],16 (p[0]) ld8 t3[0]=[src1],16
(EPI) st8 [tgt1]=t3[PIPE_DEPTH-1],16 (EPI) st8 [tgt1]=t3[PIPE_DEPTH-1],16
...@@ -83,8 +87,8 @@ GLOBAL_ENTRY(copy_page) ...@@ -83,8 +87,8 @@ GLOBAL_ENTRY(copy_page)
(p[0]) ld8 t8[0]=[src2],16 (p[0]) ld8 t8[0]=[src2],16
(EPI) st8 [tgt2]=t8[PIPE_DEPTH-1],16 (EPI) st8 [tgt2]=t8[PIPE_DEPTH-1],16
lfetch [srcf], 64 (p6) lfetch [srcf], 64
lfetch [tgtf], 64 (p6) lfetch [tgtf], 64
br.ctop.sptk.few 1b br.ctop.sptk.few 1b
;; ;;
mov pr=saved_pr,0xffffffffffff0000 // restore predicates mov pr=saved_pr,0xffffffffffff0000 // restore predicates
......
...@@ -32,6 +32,7 @@ ...@@ -32,6 +32,7 @@
#define __acpi_map_table(phys_addr, size) __va(phys_addr) #define __acpi_map_table(phys_addr, size) __va(phys_addr)
const char *acpi_get_sysname (void);
int acpi_boot_init (char *cdline); int acpi_boot_init (char *cdline);
int acpi_find_rsdp (unsigned long *phys_addr); int acpi_find_rsdp (unsigned long *phys_addr);
int acpi_request_vector (u32 int_type); int acpi_request_vector (u32 int_type);
......
...@@ -71,7 +71,7 @@ do { \ ...@@ -71,7 +71,7 @@ do { \
#ifdef CONFIG_IA64_GENERIC #ifdef CONFIG_IA64_GENERIC
# include <asm/machvec.h> # include <asm/machvec.h>
# define virt_to_page(kaddr) (mem_map + platform_map_nr(kaddr)) # define virt_to_page(kaddr) (mem_map + platform_map_nr(kaddr))
# define page_to_phys(page) XXX fix me # define page_to_phys(page) ((page - mem_map) << PAGE_SHIFT)
#elif defined (CONFIG_IA64_SGI_SN1) #elif defined (CONFIG_IA64_SGI_SN1)
# ifndef CONFIG_DISCONTIGMEM # ifndef CONFIG_DISCONTIGMEM
# define virt_to_page(kaddr) (mem_map + MAP_NR_DENSE(kaddr)) # define virt_to_page(kaddr) (mem_map + MAP_NR_DENSE(kaddr))
......
...@@ -154,7 +154,8 @@ typedef struct siginfo { ...@@ -154,7 +154,8 @@ typedef struct siginfo {
#define ILL_BADSTK (__SI_FAULT|8) /* internal stack error */ #define ILL_BADSTK (__SI_FAULT|8) /* internal stack error */
#define ILL_BADIADDR (__SI_FAULT|9) /* unimplemented instruction address */ #define ILL_BADIADDR (__SI_FAULT|9) /* unimplemented instruction address */
#define __ILL_BREAK (__SI_FAULT|10) /* illegal break */ #define __ILL_BREAK (__SI_FAULT|10) /* illegal break */
#define NSIGILL 10 #define __ILL_BNDMOD (__SI_FAULT|11) /* bundle-update (modification) in progress */
#define NSIGILL 11
/* /*
* SIGFPE si_codes * SIGFPE si_codes
......
/************************************************************************** /*
* * *
* Copyright (C) 2001 Silicon Graphics, Inc. All rights reserved. * * This file is subject to the terms and conditions of the GNU General Public
* * * License. See the file "COPYING" in the main directory of this archive
* These coded instructions, statements, and computer programs contain * * for more details.
* unpublished proprietary information of Silicon Graphics, Inc., and * *
* are protected by Federal copyright law. They may not be disclosed * * Copyright (c) 2001, 2002 Silicon Graphics, Inc. All rights reserved.
* to third parties or copied or duplicated in any form, in whole or * */
* in part, without the prior written consent of Silicon Graphics, Inc. *
* *
**************************************************************************/
#ifndef _SHUB_MD_H #ifndef _SHUB_MD_H
#define _SHUB_MD_H #define _SHUB_MD_H
......
...@@ -353,6 +353,9 @@ extern long __cmpxchg_called_with_bad_pointer(void); ...@@ -353,6 +353,9 @@ extern long __cmpxchg_called_with_bad_pointer(void);
# define IS_IA32_PROCESS(regs) (ia64_psr(regs)->is != 0) # define IS_IA32_PROCESS(regs) (ia64_psr(regs)->is != 0)
#else #else
# define IS_IA32_PROCESS(regs) 0 # define IS_IA32_PROCESS(regs) 0
struct task_struct;
static inline void ia32_save_state(struct task_struct *t __attribute__((unused))){}
static inline void ia32_load_state(struct task_struct *t __attribute__((unused))){}
#endif #endif
/* /*
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment