Merge branch 'for-upstream' of...

Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next

Johan Hedberg says:

====================
pull request: bluetooth-next 2018-05-18

Here's the first bluetooth-next pull request for the 4.18 kernel:

 - Refactoring of the btbcm driver
 - New USB IDs for QCA_ROME and LiteOn controllers
 - Buffer overflow fix if the controller sends invalid advertising data length
 - Various cleanups & fixes for Qualcomm controllers

Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt

+Qualcomm Bluetooth Chips
+---------------------
+
+This documents the binding structure and common properties for serial
+attached Qualcomm devices.
+
+Serial attached Qualcomm devices shall be a child node of the host UART
+device the slave device is attached to.
+
+Required properties:
+ - compatible: should contain one of the following:
+   * "qcom,qca6174-bt"
+
+Optional properties:
+ - enable-gpios: gpio specifier used to enable chip
+ - clocks: clock provided to the controller (SUSCLK_32KHZ)
+
+Example:
+
+serial@7570000 {
+	label = "BT-UART";
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,qca6174-bt";
+
+		enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>;
+		clocks = <&divclk4>;
+	};
+};

arch/arm64/boot/dts/qcom/apq8096-db820c-pins.dtsi

@@ -36,4 +36,30 @@ config {
 			drive-strength = <2>;	/* 2 MA */
 		};
 	};
+
+	blsp1_uart1_default: blsp1_uart1_default {
+		mux {
+			pins = "gpio41", "gpio42", "gpio43", "gpio44";
+			function = "blsp_uart2";
+		};
+
+		config {
+			pins = "gpio41", "gpio42", "gpio43", "gpio44";
+			drive-strength = <16>;
+			bias-disable;
+		};
+	};
+
+	blsp1_uart1_sleep: blsp1_uart1_sleep {
+		mux {
+			pins = "gpio41", "gpio42", "gpio43", "gpio44";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio41", "gpio42", "gpio43", "gpio44";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
 };

arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi

@@ -14,6 +14,28 @@ pinconf {
 		};
 	};
 
+	bt_en_gpios: bt_en_gpios {
+		pinconf {
+			pins = "gpio19";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			output-low;
+			power-source = <PM8994_GPIO_S4>; // 1.8V
+			qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+			bias-pull-down;
+		};
+	};
+
+	wlan_en_gpios: wlan_en_gpios {
+		pinconf {
+			pins = "gpio8";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			output-low;
+			power-source = <PM8994_GPIO_S4>; // 1.8V
+			qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+			bias-pull-down;
+		};
+	};
+
 	volume_up_gpio: pm8996_gpio2 {
 		pinconf {
 			pins = "gpio2";
@@ -26,6 +48,16 @@ pinconf {
 		};
 	};
 
+	divclk4_pin_a: divclk4 {
+		pinconf {
+			pins = "gpio18";
+			function = PMIC_GPIO_FUNC_FUNC2;
+
+			bias-disable;
+			power-source = <PM8994_GPIO_S4>;
+		};
+	};
+
 	usb3_vbus_det_gpio: pm8996_gpio22 {
 		pinconf {
 			pins = "gpio22";

arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi

@@ -23,6 +23,7 @@ / {
 	aliases {
 		serial0 = &blsp2_uart1;
 		serial1 = &blsp2_uart2;
+		serial2 = &blsp1_uart1;
 		i2c0	= &blsp1_i2c2;
 		i2c1	= &blsp2_i2c1;
 		i2c2	= &blsp2_i2c0;
@@ -34,7 +35,36 @@ chosen {
 		stdout-path = "serial0:115200n8";
 	};
 
+	clocks {
+		divclk4: divclk4 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+			clock-output-names = "divclk4";
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&divclk4_pin_a>;
+		};
+	};
+
 	soc {
+		serial@7570000 {
+			label = "BT-UART";
+			status = "okay";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp1_uart1_default>;
+			pinctrl-1 = <&blsp1_uart1_sleep>;
+
+			bluetooth {
+				compatible = "qcom,qca6174-bt";
+
+				/* bt_disable_n gpio */
+				enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>;
+
+				clocks = <&divclk4>;
+			};
+		};
+
 		serial@75b0000 {
 			label = "LS-UART1";
 			status = "okay";
@@ -139,9 +169,40 @@ usb2_id: usb2-id {
 			pinctrl-0 = <&usb2_vbus_det_gpio>;
 		};
 
+		bt_en: bt-en-1-8v {
+			pinctrl-names = "default";
+			pinctrl-0 = <&bt_en_gpios>;
+			compatible = "regulator-fixed";
+			regulator-name = "bt-en-regulator";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+
+			/* WLAN card specific delay */
+			startup-delay-us = <70000>;
+			enable-active-high;
+		};
+
+		wlan_en: wlan-en-1-8v {
+			pinctrl-names = "default";
+			pinctrl-0 = <&wlan_en_gpios>;
+			compatible = "regulator-fixed";
+			regulator-name = "wlan-en-regulator";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+
+			gpio = <&pm8994_gpios 8 0>;
+
+			/* WLAN card specific delay */
+			startup-delay-us = <70000>;
+			enable-active-high;
+		};
+
 		agnoc@0 {
 			qcom,pcie@600000 {
+				status = "okay";
 				perst-gpio = <&msmgpio 35 GPIO_ACTIVE_LOW>;
+				vddpe-supply = <&wlan_en>;
+				vddpe1-supply = <&bt_en>;
 			};
 
 			qcom,pcie@608000 {

arch/arm64/boot/dts/qcom/msm8996.dtsi

@@ -419,6 +419,16 @@ kryocc: clock-controller@6400000 {
 			#clock-cells = <1>;
 		};
 
+		blsp1_uart1: serial@7570000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x07570000 0x1000>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
 		blsp1_spi0: spi@7575000 {
 			compatible = "qcom,spi-qup-v2.2.1";
 			reg = <0x07575000 0x600>;

drivers/bluetooth/Kconfig

@@ -197,6 +197,7 @@ config BT_HCIUART_BCM
 config BT_HCIUART_QCA
 	bool "Qualcomm Atheros protocol support"
 	depends on BT_HCIUART
+	depends on BT_HCIUART_SERDEV
 	select BT_HCIUART_H4
 	select BT_QCA
 	help

drivers/bluetooth/btbcm.c

@@ -315,10 +315,12 @@ static int btbcm_read_info(struct hci_dev *hdev)
 	return 0;
 }
 
-static const struct {
+struct bcm_subver_table {
 	u16 subver;
 	const char *name;
-} bcm_uart_subver_table[] = {
+};
+
+static const struct bcm_subver_table bcm_uart_subver_table[] = {
 	{ 0x4103, "BCM4330B1"	},	/* 002.001.003 */
 	{ 0x410e, "BCM43341B0"	},	/* 002.001.014 */
 	{ 0x4406, "BCM4324B3"	},	/* 002.004.006 */
@@ -330,12 +332,28 @@ static const struct {
 	{ }
 };
 
-int btbcm_initialize(struct hci_dev *hdev, char *fw_name, size_t len)
+static const struct bcm_subver_table bcm_usb_subver_table[] = {
+	{ 0x210b, "BCM43142A0"	},	/* 001.001.011 */
+	{ 0x2112, "BCM4314A0"	},	/* 001.001.018 */
+	{ 0x2118, "BCM20702A0"	},	/* 001.001.024 */
+	{ 0x2126, "BCM4335A0"	},	/* 001.001.038 */
+	{ 0x220e, "BCM20702A1"	},	/* 001.002.014 */
+	{ 0x230f, "BCM4354A2"	},	/* 001.003.015 */
+	{ 0x4106, "BCM4335B0"	},	/* 002.001.006 */
+	{ 0x410e, "BCM20702B0"	},	/* 002.001.014 */
+	{ 0x6109, "BCM4335C0"	},	/* 003.001.009 */
+	{ 0x610c, "BCM4354"	},	/* 003.001.012 */
+	{ }
+};
+
+int btbcm_initialize(struct hci_dev *hdev, char *fw_name, size_t len,
+		     bool reinit)
 {
-	u16 subver, rev;
-	const char *hw_name = NULL;
+	u16 subver, rev, pid, vid;
+	const char *hw_name = "BCM";
 	struct sk_buff *skb;
 	struct hci_rp_read_local_version *ver;
+	const struct bcm_subver_table *bcm_subver_table;
 	int i, err;
 
 	/* Reset */
@@ -354,30 +372,44 @@ int btbcm_initialize(struct hci_dev *hdev, char *fw_name, size_t len)
 	kfree_skb(skb);
 
 	/* Read controller information */
+	if (!reinit) {
 		err = btbcm_read_info(hdev);
 		if (err)
 			return err;
+	}
+
+	/* Upper nibble of rev should be between 0 and 3? */
+	if (((rev & 0xf000) >> 12) > 3)
+		return 0;
+
+	bcm_subver_table = (hdev->bus == HCI_USB) ? bcm_usb_subver_table :
+						    bcm_uart_subver_table;
 
-	switch ((rev & 0xf000) >> 12) {
-	case 0:
-	case 1:
-	case 2:
-	case 3:
-		for (i = 0; bcm_uart_subver_table[i].name; i++) {
-			if (subver == bcm_uart_subver_table[i].subver) {
-				hw_name = bcm_uart_subver_table[i].name;
+	for (i = 0; bcm_subver_table[i].name; i++) {
+		if (subver == bcm_subver_table[i].subver) {
+			hw_name = bcm_subver_table[i].name;
 			break;
 		}
 	}
 
-		snprintf(fw_name, len, "brcm/%s.hcd", hw_name ? : "BCM");
-		break;
-	default:
-		return 0;
+	if (hdev->bus == HCI_USB) {
+		/* Read USB Product Info */
+		skb = btbcm_read_usb_product(hdev);
+		if (IS_ERR(skb))
+			return PTR_ERR(skb);
+
+		vid = get_unaligned_le16(skb->data + 1);
+		pid = get_unaligned_le16(skb->data + 3);
+		kfree_skb(skb);
+
+		snprintf(fw_name, len, "brcm/%s-%4.4x-%4.4x.hcd",
+			 hw_name, vid, pid);
+	} else {
+		snprintf(fw_name, len, "brcm/%s.hcd", hw_name);
 	}
 
 	bt_dev_info(hdev, "%s (%3.3u.%3.3u.%3.3u) build %4.4u",
-		    hw_name ? : "BCM", (subver & 0xe000) >> 13,
+		    hw_name, (subver & 0xe000) >> 13,
 		    (subver & 0x1f00) >> 8, (subver & 0x00ff), rev & 0x0fff);
 
 	return 0;
@@ -386,30 +418,14 @@ EXPORT_SYMBOL_GPL(btbcm_initialize);
 
 int btbcm_finalize(struct hci_dev *hdev)
 {
-	struct sk_buff *skb;
-	struct hci_rp_read_local_version *ver;
-	u16 subver, rev;
+	char fw_name[64];
 	int err;
 
-	/* Reset */
-	err = btbcm_reset(hdev);
+	/* Re-initialize */
+	err = btbcm_initialize(hdev, fw_name, sizeof(fw_name), true);
 	if (err)
 		return err;
 
-	/* Read Local Version Info */
-	skb = btbcm_read_local_version(hdev);
-	if (IS_ERR(skb))
-		return PTR_ERR(skb);
-
-	ver = (struct hci_rp_read_local_version *)skb->data;
-	rev = le16_to_cpu(ver->hci_rev);
-	subver = le16_to_cpu(ver->lmp_subver);
-	kfree_skb(skb);
-
-	bt_dev_info(hdev, "BCM (%3.3u.%3.3u.%3.3u) build %4.4u",
-		    (subver & 0xe000) >> 13, (subver & 0x1f00) >> 8,
-		    (subver & 0x00ff), rev & 0x0fff);
-
 	btbcm_check_bdaddr(hdev);
 
 	set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);
@@ -418,95 +434,18 @@ int btbcm_finalize(struct hci_dev *hdev)
 }
 EXPORT_SYMBOL_GPL(btbcm_finalize);
 
-static const struct {
-	u16 subver;
-	const char *name;
-} bcm_usb_subver_table[] = {
-	{ 0x210b, "BCM43142A0"	},	/* 001.001.011 */
-	{ 0x2112, "BCM4314A0"	},	/* 001.001.018 */
-	{ 0x2118, "BCM20702A0"	},	/* 001.001.024 */
-	{ 0x2126, "BCM4335A0"	},	/* 001.001.038 */
-	{ 0x220e, "BCM20702A1"	},	/* 001.002.014 */
-	{ 0x230f, "BCM4354A2"	},	/* 001.003.015 */
-	{ 0x4106, "BCM4335B0"	},	/* 002.001.006 */
-	{ 0x410e, "BCM20702B0"	},	/* 002.001.014 */
-	{ 0x6109, "BCM4335C0"	},	/* 003.001.009 */
-	{ 0x610c, "BCM4354"	},	/* 003.001.012 */
-	{ }
-};
-
 int btbcm_setup_patchram(struct hci_dev *hdev)
 {
 	char fw_name[64];
 	const struct firmware *fw;
-	u16 subver, rev, pid, vid;
-	const char *hw_name = NULL;
 	struct sk_buff *skb;
-	struct hci_rp_read_local_version *ver;
-	int i, err;
-
-	/* Reset */
-	err = btbcm_reset(hdev);
-	if (err)
-		return err;
-
-	/* Read Local Version Info */
-	skb = btbcm_read_local_version(hdev);
-	if (IS_ERR(skb))
-		return PTR_ERR(skb);
-
-	ver = (struct hci_rp_read_local_version *)skb->data;
-	rev = le16_to_cpu(ver->hci_rev);
-	subver = le16_to_cpu(ver->lmp_subver);
-	kfree_skb(skb);
+	int err;
 
-	/* Read controller information */
-	err = btbcm_read_info(hdev);
+	/* Initialize */
+	err = btbcm_initialize(hdev, fw_name, sizeof(fw_name), false);
 	if (err)
 		return err;
 
-	switch ((rev & 0xf000) >> 12) {
-	case 0:
-	case 3:
-		for (i = 0; bcm_uart_subver_table[i].name; i++) {
-			if (subver == bcm_uart_subver_table[i].subver) {
-				hw_name = bcm_uart_subver_table[i].name;
-				break;
-			}
-		}
-
-		snprintf(fw_name, sizeof(fw_name), "brcm/%s.hcd",
-			 hw_name ? : "BCM");
-		break;
-	case 1:
-	case 2:
-		/* Read USB Product Info */
-		skb = btbcm_read_usb_product(hdev);
-		if (IS_ERR(skb))
-			return PTR_ERR(skb);
-
-		vid = get_unaligned_le16(skb->data + 1);
-		pid = get_unaligned_le16(skb->data + 3);
-		kfree_skb(skb);
-
-		for (i = 0; bcm_usb_subver_table[i].name; i++) {
-			if (subver == bcm_usb_subver_table[i].subver) {
-				hw_name = bcm_usb_subver_table[i].name;
-				break;
-			}
-		}
-
-		snprintf(fw_name, sizeof(fw_name), "brcm/%s-%4.4x-%4.4x.hcd",
-			 hw_name ? : "BCM", vid, pid);
-		break;
-	default:
-		return 0;
-	}
-
-	bt_dev_info(hdev, "%s (%3.3u.%3.3u.%3.3u) build %4.4u",
-		    hw_name ? : "BCM", (subver & 0xe000) >> 13,
-		    (subver & 0x1f00) >> 8, (subver & 0x00ff), rev & 0x0fff);
-
 	err = request_firmware(&fw, fw_name, &hdev->dev);
 	if (err < 0) {
 		bt_dev_info(hdev, "BCM: Patch %s not found", fw_name);
@@ -517,25 +456,11 @@ int btbcm_setup_patchram(struct hci_dev *hdev)
 
 	release_firmware(fw);
 
-	/* Reset */
-	err = btbcm_reset(hdev);
+	/* Re-initialize */
+	err = btbcm_initialize(hdev, fw_name, sizeof(fw_name), true);
 	if (err)
 		return err;
 
-	/* Read Local Version Info */
-	skb = btbcm_read_local_version(hdev);
-	if (IS_ERR(skb))
-		return PTR_ERR(skb);
-
-	ver = (struct hci_rp_read_local_version *)skb->data;
-	rev = le16_to_cpu(ver->hci_rev);
-	subver = le16_to_cpu(ver->lmp_subver);
-	kfree_skb(skb);
-
-	bt_dev_info(hdev, "%s (%3.3u.%3.3u.%3.3u) build %4.4u",
-		    hw_name ? : "BCM", (subver & 0xe000) >> 13,
-		    (subver & 0x1f00) >> 8, (subver & 0x00ff), rev & 0x0fff);
-
 	/* Read Local Name */
 	skb = btbcm_read_local_name(hdev);
 	if (IS_ERR(skb))

drivers/bluetooth/btbcm.h

@@ -73,7 +73,8 @@ int btbcm_patchram(struct hci_dev *hdev, const struct firmware *fw);
 int btbcm_setup_patchram(struct hci_dev *hdev);
 int btbcm_setup_apple(struct hci_dev *hdev);
 
-int btbcm_initialize(struct hci_dev *hdev, char *fw_name, size_t len);
+int btbcm_initialize(struct hci_dev *hdev, char *fw_name, size_t len,
+		     bool reinit);
 int btbcm_finalize(struct hci_dev *hdev);
 
 #else
@@ -104,7 +105,7 @@ static inline int btbcm_setup_apple(struct hci_dev *hdev)
 }
 
 static inline int btbcm_initialize(struct hci_dev *hdev, char *fw_name,
-				   size_t len)
+				   size_t len, bool reinit)
 {
 	return 0;
 }

drivers/bluetooth/btqca.c

@@ -127,28 +127,41 @@ static void rome_tlv_check_data(struct rome_config *config,
 	BT_DBG("TLV Type\t\t : 0x%x", type_len & 0x000000ff);
 	BT_DBG("Length\t\t : %d bytes", length);
 
+	config->dnld_mode = ROME_SKIP_EVT_NONE;
+
 	switch (config->type) {
 	case TLV_TYPE_PATCH:
 		tlv_patch = (struct tlv_type_patch *)tlv->data;
-		BT_DBG("Total Length\t\t : %d bytes",
+
+		/* For Rome version 1.1 to 3.1, all segment commands
+		 * are acked by a vendor specific event (VSE).
+		 * For Rome >= 3.2, the download mode field indicates
+		 * if VSE is skipped by the controller.
+		 * In case VSE is skipped, only the last segment is acked.
+		 */
+		config->dnld_mode = tlv_patch->download_mode;
+
+		BT_DBG("Total Length           : %d bytes",
 		       le32_to_cpu(tlv_patch->total_size));
-		BT_DBG("Patch Data Length\t : %d bytes",
+		BT_DBG("Patch Data Length      : %d bytes",
 		       le32_to_cpu(tlv_patch->data_length));
 		BT_DBG("Signing Format Version : 0x%x",
 		       tlv_patch->format_version);
-		BT_DBG("Signature Algorithm\t : 0x%x",
+		BT_DBG("Signature Algorithm    : 0x%x",
 		       tlv_patch->signature);
-		BT_DBG("Reserved\t\t : 0x%x",
-		       le16_to_cpu(tlv_patch->reserved1));
-		BT_DBG("Product ID\t\t : 0x%04x",
+		BT_DBG("Download mode          : 0x%x",
+		       tlv_patch->download_mode);
+		BT_DBG("Reserved               : 0x%x",
+		       tlv_patch->reserved1);
+		BT_DBG("Product ID             : 0x%04x",
 		       le16_to_cpu(tlv_patch->product_id));
-		BT_DBG("Rom Build Version\t : 0x%04x",
+		BT_DBG("Rom Build Version      : 0x%04x",
 		       le16_to_cpu(tlv_patch->rom_build));
-		BT_DBG("Patch Version\t\t : 0x%04x",
+		BT_DBG("Patch Version          : 0x%04x",
 		       le16_to_cpu(tlv_patch->patch_version));
-		BT_DBG("Reserved\t\t : 0x%x",
+		BT_DBG("Reserved               : 0x%x",
 		       le16_to_cpu(tlv_patch->reserved2));
-		BT_DBG("Patch Entry Address\t : 0x%x",
+		BT_DBG("Patch Entry Address    : 0x%x",
 		       le32_to_cpu(tlv_patch->entry));
 		break;
 
@@ -194,8 +207,8 @@ static void rome_tlv_check_data(struct rome_config *config,
 	}
 }
 
-static int rome_tlv_send_segment(struct hci_dev *hdev, int idx, int seg_size,
-				 const u8 *data)
+static int rome_tlv_send_segment(struct hci_dev *hdev, int seg_size,
+				 const u8 *data, enum rome_tlv_dnld_mode mode)
 {
 	struct sk_buff *skb;
 	struct edl_event_hdr *edl;
@@ -203,12 +216,14 @@ static int rome_tlv_send_segment(struct hci_dev *hdev, int idx, int seg_size,
 	u8 cmd[MAX_SIZE_PER_TLV_SEGMENT + 2];
 	int err = 0;
 
-	BT_DBG("%s: Download segment #%d size %d", hdev->name, idx, seg_size);
-
 	cmd[0] = EDL_PATCH_TLV_REQ_CMD;
 	cmd[1] = seg_size;
 	memcpy(cmd + 2, data, seg_size);
 
+	if (mode == ROME_SKIP_EVT_VSE_CC || mode == ROME_SKIP_EVT_VSE)
+		return __hci_cmd_send(hdev, EDL_PATCH_CMD_OPCODE, seg_size + 2,
+				      cmd);
+
 	skb = __hci_cmd_sync_ev(hdev, EDL_PATCH_CMD_OPCODE, seg_size + 2, cmd,
 				HCI_VENDOR_PKT, HCI_INIT_TIMEOUT);
 	if (IS_ERR(skb)) {
@@ -245,47 +260,12 @@ static int rome_tlv_send_segment(struct hci_dev *hdev, int idx, int seg_size,
 	return err;
 }
 
-static int rome_tlv_download_request(struct hci_dev *hdev,
-				     const struct firmware *fw)
-{
-	const u8 *buffer, *data;
-	int total_segment, remain_size;
-	int ret, i;
-
-	if (!fw || !fw->data)
-		return -EINVAL;
-
-	total_segment = fw->size / MAX_SIZE_PER_TLV_SEGMENT;
-	remain_size = fw->size % MAX_SIZE_PER_TLV_SEGMENT;
-
-	BT_DBG("%s: Total segment num %d remain size %d total size %zu",
-	       hdev->name, total_segment, remain_size, fw->size);
-
-	data = fw->data;
-	for (i = 0; i < total_segment; i++) {
-		buffer = data + i * MAX_SIZE_PER_TLV_SEGMENT;
-		ret = rome_tlv_send_segment(hdev, i, MAX_SIZE_PER_TLV_SEGMENT,
-					    buffer);
-		if (ret < 0)
-			return -EIO;
-	}
-
-	if (remain_size) {
-		buffer = data + total_segment * MAX_SIZE_PER_TLV_SEGMENT;
-		ret = rome_tlv_send_segment(hdev, total_segment, remain_size,
-					    buffer);
-		if (ret < 0)
-			return -EIO;
-	}
-
-	return 0;
-}
-
 static int rome_download_firmware(struct hci_dev *hdev,
 				  struct rome_config *config)
 {
 	const struct firmware *fw;
-	int ret;
+	const u8 *segment;
+	int ret, remain, i = 0;
 
 	bt_dev_info(hdev, "ROME Downloading %s", config->fwname);
 
@@ -298,10 +278,24 @@ static int rome_download_firmware(struct hci_dev *hdev,
 
 	rome_tlv_check_data(config, fw);
 
-	ret = rome_tlv_download_request(hdev, fw);
-	if (ret) {
-		BT_ERR("%s: Failed to download file: %s (%d)", hdev->name,
-		       config->fwname, ret);
+	segment = fw->data;
+	remain = fw->size;
+	while (remain > 0) {
+		int segsize = min(MAX_SIZE_PER_TLV_SEGMENT, remain);
+
+		bt_dev_dbg(hdev, "Send segment %d, size %d", i++, segsize);
+
+		remain -= segsize;
+		/* The last segment is always acked regardless download mode */
+		if (!remain || segsize < MAX_SIZE_PER_TLV_SEGMENT)
+			config->dnld_mode = ROME_SKIP_EVT_NONE;
+
+		ret = rome_tlv_send_segment(hdev, segsize, segment,
+					    config->dnld_mode);
+		if (ret)
+			break;
+
+		segment += segsize;
 	}
 
 	release_firmware(fw);

drivers/bluetooth/btqca.h

@@ -61,6 +61,13 @@ enum qca_bardrate {
 	QCA_BAUDRATE_RESERVED
 };
 
+enum rome_tlv_dnld_mode {
+	ROME_SKIP_EVT_NONE,
+	ROME_SKIP_EVT_VSE,
+	ROME_SKIP_EVT_CC,
+	ROME_SKIP_EVT_VSE_CC
+};
+
 enum rome_tlv_type {
 	TLV_TYPE_PATCH = 1,
 	TLV_TYPE_NVM
@@ -70,6 +77,7 @@ struct rome_config {
 	u8 type;
 	char fwname[64];
 	uint8_t user_baud_rate;
+	enum rome_tlv_dnld_mode dnld_mode;
 };
 
 struct edl_event_hdr {
@@ -94,7 +102,8 @@ struct tlv_type_patch {
 	__le32 data_length;
 	__u8   format_version;
 	__u8   signature;
-	__le16 reserved1;
+	__u8   download_mode;
+	__u8   reserved1;
 	__le16 product_id;
 	__le16 rom_build;
 	__le16 patch_version;

drivers/bluetooth/btqcomsmd.c

@@ -65,6 +65,7 @@ static int btqcomsmd_cmd_callback(struct rpmsg_device *rpdev, void *data,
 {
 	struct btqcomsmd *btq = priv;
 
+	btq->hdev->stat.byte_rx += count;
 	return btqcomsmd_recv(btq->hdev, HCI_EVENT_PKT, data, count);
 }
 
@@ -76,12 +77,21 @@ static int btqcomsmd_send(struct hci_dev *hdev, struct sk_buff *skb)
 	switch (hci_skb_pkt_type(skb)) {
 	case HCI_ACLDATA_PKT:
 		ret = rpmsg_send(btq->acl_channel, skb->data, skb->len);
+		if (ret) {
+			hdev->stat.err_tx++;
+			break;
+		}
 		hdev->stat.acl_tx++;
 		hdev->stat.byte_tx += skb->len;
 		break;
 	case HCI_COMMAND_PKT:
 		ret = rpmsg_send(btq->cmd_channel, skb->data, skb->len);
+		if (ret) {
+			hdev->stat.err_tx++;
+			break;
+		}
 		hdev->stat.cmd_tx++;
+		hdev->stat.byte_tx += skb->len;
 		break;
 	default:
 		ret = -EILSEQ;

drivers/bluetooth/btusb.c

@@ -276,6 +276,8 @@ static const struct usb_device_id blacklist_table[] = {
 	{ USB_DEVICE(0x04ca, 0x3011), .driver_info = BTUSB_QCA_ROME },
 	{ USB_DEVICE(0x04ca, 0x3015), .driver_info = BTUSB_QCA_ROME },
 	{ USB_DEVICE(0x04ca, 0x3016), .driver_info = BTUSB_QCA_ROME },
+	{ USB_DEVICE(0x04ca, 0x301a), .driver_info = BTUSB_QCA_ROME },
+	{ USB_DEVICE(0x13d3, 0x3496), .driver_info = BTUSB_QCA_ROME },
 
 	/* Broadcom BCM2035 */
 	{ USB_DEVICE(0x0a5c, 0x2009), .driver_info = BTUSB_BCM92035 },

drivers/bluetooth/hci_bcm.c

@@ -501,7 +501,7 @@ static int bcm_setup(struct hci_uart *hu)
 	hu->hdev->set_diag = bcm_set_diag;
 	hu->hdev->set_bdaddr = btbcm_set_bdaddr;
 
-	err = btbcm_initialize(hu->hdev, fw_name, sizeof(fw_name));
+	err = btbcm_initialize(hu->hdev, fw_name, sizeof(fw_name), false);
 	if (err)
 		return err;
 
@@ -794,19 +794,21 @@ static const struct acpi_gpio_mapping acpi_bcm_int_first_gpios[] = {
 	{ },
 };
 
-#ifdef CONFIG_ACPI
-/* IRQ polarity of some chipsets are not defined correctly in ACPI table. */
-static const struct dmi_system_id bcm_active_low_irq_dmi_table[] = {
-	{	/* Handle ThinkPad 8 tablets with BCM2E55 chipset ACPI ID */
-		.ident = "Lenovo ThinkPad 8",
+/* Some firmware reports an IRQ which does not work (wrong pin in fw table?) */
+static const struct dmi_system_id bcm_broken_irq_dmi_table[] = {
+	{
+		.ident = "Meegopad T08",
 		.matches = {
-			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "LENOVO"),
-			DMI_EXACT_MATCH(DMI_PRODUCT_VERSION, "ThinkPad 8"),
+			DMI_EXACT_MATCH(DMI_BOARD_VENDOR,
+					"To be filled by OEM."),
+			DMI_EXACT_MATCH(DMI_BOARD_NAME, "T3 MRD"),
+			DMI_EXACT_MATCH(DMI_BOARD_VERSION, "V1.1"),
 		},
 	},
 	{ }
 };
 
+#ifdef CONFIG_ACPI
 static int bcm_resource(struct acpi_resource *ares, void *data)
 {
 	struct bcm_device *dev = data;
@@ -904,6 +906,8 @@ static int bcm_gpio_set_shutdown(struct bcm_device *dev, bool powered)
 
 static int bcm_get_resources(struct bcm_device *dev)
 {
+	const struct dmi_system_id *dmi_id;
+
 	dev->name = dev_name(dev->dev);
 
 	if (x86_apple_machine && !bcm_apple_get_resources(dev))
@@ -936,6 +940,13 @@ static int bcm_get_resources(struct bcm_device *dev)
 		dev->irq = gpiod_to_irq(gpio);
 	}
 
+	dmi_id = dmi_first_match(bcm_broken_irq_dmi_table);
+	if (dmi_id) {
+		dev_info(dev->dev, "%s: Has a broken IRQ config, disabling IRQ support / runtime-pm\n",
+			 dmi_id->ident);
+		dev->irq = 0;
+	}
+
 	dev_dbg(dev->dev, "BCM irq: %d\n", dev->irq);
 	return 0;
 }
@@ -944,7 +955,6 @@ static int bcm_get_resources(struct bcm_device *dev)
 static int bcm_acpi_probe(struct bcm_device *dev)
 {
 	LIST_HEAD(resources);
-	const struct dmi_system_id *dmi_id;
 	const struct acpi_gpio_mapping *gpio_mapping = acpi_bcm_int_last_gpios;
 	struct resource_entry *entry;
 	int ret;
@@ -991,13 +1001,6 @@ static int bcm_acpi_probe(struct bcm_device *dev)
 		dev->irq_active_low = irq_polarity;
 		dev_warn(dev->dev, "Overwriting IRQ polarity to active %s by module-param\n",
 			 dev->irq_active_low ? "low" : "high");
-	} else {
-		dmi_id = dmi_first_match(bcm_active_low_irq_dmi_table);
-		if (dmi_id) {
-			dev_warn(dev->dev, "%s: Overwriting IRQ polarity to active low",
-				 dmi_id->ident);
-			dev->irq_active_low = true;
-		}
 	}
 
 	return 0;

drivers/bluetooth/hci_ldisc.c

@@ -447,6 +447,8 @@ static int hci_uart_setup(struct hci_dev *hdev)
 		btbcm_check_bdaddr(hdev);
 		break;
 #endif
+	default:
+		break;
 	}
 
 done:

drivers/bluetooth/hci_qca.c

@@ -29,7 +29,12 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/clk.h>
 #include <linux/debugfs.h>
+#include <linux/gpio/consumer.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/serdev.h>
 
 #include <net/bluetooth/bluetooth.h>
 #include <net/bluetooth/hci_core.h>
@@ -50,6 +55,9 @@
 #define IBS_TX_IDLE_TIMEOUT_MS		2000
 #define BAUDRATE_SETTLE_TIMEOUT_MS	300
 
+/* susclk rate */
+#define SUSCLK_RATE_32KHZ	32768
+
 /* HCI_IBS transmit side sleep protocol states */
 enum tx_ibs_states {
 	HCI_IBS_TX_ASLEEP,
@@ -111,6 +119,12 @@ struct qca_data {
 	u64 votes_off;
 };
 
+struct qca_serdev {
+	struct hci_uart	 serdev_hu;
+	struct gpio_desc *bt_en;
+	struct clk	 *susclk;
+};
+
 static void __serial_clock_on(struct tty_struct *tty)
 {
 	/* TODO: Some chipset requires to enable UART clock on client
@@ -386,6 +400,7 @@ static void hci_ibs_wake_retrans_timeout(struct timer_list *t)
 /* Initialize protocol */
 static int qca_open(struct hci_uart *hu)
 {
+	struct qca_serdev *qcadev;
 	struct qca_data *qca;
 
 	BT_DBG("hu %p qca_open", hu);
@@ -444,6 +459,13 @@ static int qca_open(struct hci_uart *hu)
 	timer_setup(&qca->tx_idle_timer, hci_ibs_tx_idle_timeout, 0);
 	qca->tx_idle_delay = IBS_TX_IDLE_TIMEOUT_MS;
 
+	if (hu->serdev) {
+		serdev_device_open(hu->serdev);
+
+		qcadev = serdev_device_get_drvdata(hu->serdev);
+		gpiod_set_value_cansleep(qcadev->bt_en, 1);
+	}
+
 	BT_DBG("HCI_UART_QCA open, tx_idle_delay=%u, wake_retrans=%u",
 	       qca->tx_idle_delay, qca->wake_retrans);
 
@@ -512,6 +534,7 @@ static int qca_flush(struct hci_uart *hu)
 /* Close protocol */
 static int qca_close(struct hci_uart *hu)
 {
+	struct qca_serdev *qcadev;
 	struct qca_data *qca = hu->priv;
 
 	BT_DBG("hu %p qca close", hu);
@@ -525,6 +548,13 @@ static int qca_close(struct hci_uart *hu)
 	destroy_workqueue(qca->workqueue);
 	qca->hu = NULL;
 
+	if (hu->serdev) {
+		serdev_device_close(hu->serdev);
+
+		qcadev = serdev_device_get_drvdata(hu->serdev);
+		gpiod_set_value_cansleep(qcadev->bt_en, 0);
+	}
+
 	kfree_skb(qca->rx_skb);
 
 	hu->priv = NULL;
@@ -885,6 +915,14 @@ static int qca_set_baudrate(struct hci_dev *hdev, uint8_t baudrate)
 	return 0;
 }
 
+static inline void host_set_baudrate(struct hci_uart *hu, unsigned int speed)
+{
+	if (hu->serdev)
+		serdev_device_set_baudrate(hu->serdev, speed);
+	else
+		hci_uart_set_baudrate(hu, speed);
+}
+
 static int qca_setup(struct hci_uart *hu)
 {
 	struct hci_dev *hdev = hu->hdev;
@@ -905,7 +943,7 @@ static int qca_setup(struct hci_uart *hu)
 		speed = hu->proto->init_speed;
 
 	if (speed)
-		hci_uart_set_baudrate(hu, speed);
+		host_set_baudrate(hu, speed);
 
 	/* Setup user speed if needed */
 	speed = 0;
@@ -924,7 +962,7 @@ static int qca_setup(struct hci_uart *hu)
 				   ret);
 			return ret;
 		}
-		hci_uart_set_baudrate(hu, speed);
+		host_set_baudrate(hu, speed);
 	}
 
 	/* Setup patch / NVM configurations */
@@ -935,6 +973,12 @@ static int qca_setup(struct hci_uart *hu)
 	} else if (ret == -ENOENT) {
 		/* No patch/nvm-config found, run with original fw/config */
 		ret = 0;
+	} else if (ret == -EAGAIN) {
+		/*
+		 * Userspace firmware loader will return -EAGAIN in case no
+		 * patch/nvm-config is found, so run with original fw/config.
+		 */
+		ret = 0;
 	}
 
 	/* Setup bdaddr */
@@ -958,12 +1002,80 @@ static struct hci_uart_proto qca_proto = {
 	.dequeue	= qca_dequeue,
 };
 
+static int qca_serdev_probe(struct serdev_device *serdev)
+{
+	struct qca_serdev *qcadev;
+	int err;
+
+	qcadev = devm_kzalloc(&serdev->dev, sizeof(*qcadev), GFP_KERNEL);
+	if (!qcadev)
+		return -ENOMEM;
+
+	qcadev->serdev_hu.serdev = serdev;
+	serdev_device_set_drvdata(serdev, qcadev);
+
+	qcadev->bt_en = devm_gpiod_get(&serdev->dev, "enable",
+				       GPIOD_OUT_LOW);
+	if (IS_ERR(qcadev->bt_en)) {
+		dev_err(&serdev->dev, "failed to acquire enable gpio\n");
+		return PTR_ERR(qcadev->bt_en);
+	}
+
+	qcadev->susclk = devm_clk_get(&serdev->dev, NULL);
+	if (IS_ERR(qcadev->susclk)) {
+		dev_err(&serdev->dev, "failed to acquire clk\n");
+		return PTR_ERR(qcadev->susclk);
+	}
+
+	err = clk_set_rate(qcadev->susclk, SUSCLK_RATE_32KHZ);
+	if (err)
+		return err;
+
+	err = clk_prepare_enable(qcadev->susclk);
+	if (err)
+		return err;
+
+	err = hci_uart_register_device(&qcadev->serdev_hu, &qca_proto);
+	if (err)
+		clk_disable_unprepare(qcadev->susclk);
+
+	return err;
+}
+
+static void qca_serdev_remove(struct serdev_device *serdev)
+{
+	struct qca_serdev *qcadev = serdev_device_get_drvdata(serdev);
+
+	hci_uart_unregister_device(&qcadev->serdev_hu);
+
+	clk_disable_unprepare(qcadev->susclk);
+}
+
+static const struct of_device_id qca_bluetooth_of_match[] = {
+	{ .compatible = "qcom,qca6174-bt" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, qca_bluetooth_of_match);
+
+static struct serdev_device_driver qca_serdev_driver = {
+	.probe = qca_serdev_probe,
+	.remove = qca_serdev_remove,
+	.driver = {
+		.name = "hci_uart_qca",
+		.of_match_table = qca_bluetooth_of_match,
+	},
+};
+
 int __init qca_init(void)
 {
+	serdev_device_driver_register(&qca_serdev_driver);
+
 	return hci_uart_register_proto(&qca_proto);
 }
 
 int __exit qca_deinit(void)
 {
+	serdev_device_driver_unregister(&qca_serdev_driver);
+
 	return hci_uart_unregister_proto(&qca_proto);
 }

include/net/bluetooth/hci_core.h

@@ -1393,6 +1393,8 @@ struct sk_buff *__hci_cmd_sync(struct hci_dev *hdev, u16 opcode, u32 plen,
 			       const void *param, u32 timeout);
 struct sk_buff *__hci_cmd_sync_ev(struct hci_dev *hdev, u16 opcode, u32 plen,
 				  const void *param, u8 event, u32 timeout);
+int __hci_cmd_send(struct hci_dev *hdev, u16 opcode, u32 plen,
+		   const void *param);
 
 int hci_send_cmd(struct hci_dev *hdev, __u16 opcode, __u32 plen,
 		 const void *param);

net/bluetooth/hci_core.c

@@ -3422,6 +3422,37 @@ int hci_send_cmd(struct hci_dev *hdev, __u16 opcode, __u32 plen,
 	return 0;
 }
 
+int __hci_cmd_send(struct hci_dev *hdev, u16 opcode, u32 plen,
+		   const void *param)
+{
+	struct sk_buff *skb;
+
+	if (hci_opcode_ogf(opcode) != 0x3f) {
+		/* A controller receiving a command shall respond with either
+		 * a Command Status Event or a Command Complete Event.
+		 * Therefore, all standard HCI commands must be sent via the
+		 * standard API, using hci_send_cmd or hci_cmd_sync helpers.
+		 * Some vendors do not comply with this rule for vendor-specific
+		 * commands and do not return any event. We want to support
+		 * unresponded commands for such cases only.
+		 */
+		bt_dev_err(hdev, "unresponded command not supported");
+		return -EINVAL;
+	}
+
+	skb = hci_prepare_cmd(hdev, opcode, plen, param);
+	if (!skb) {
+		bt_dev_err(hdev, "no memory for command (opcode 0x%4.4x)",
+			   opcode);
+		return -ENOMEM;
+	}
+
+	hci_send_frame(hdev, skb);
+
+	return 0;
+}
+EXPORT_SYMBOL(__hci_cmd_send);
+
 /* Get data from the previously sent command */
 void *hci_sent_cmd_data(struct hci_dev *hdev, __u16 opcode)
 {

net/bluetooth/hci_event.c

@@ -4942,10 +4942,14 @@ static void hci_le_adv_report_evt(struct hci_dev *hdev, struct sk_buff *skb)
 		struct hci_ev_le_advertising_info *ev = ptr;
 		s8 rssi;
 
+		if (ev->length <= HCI_MAX_AD_LENGTH) {
 			rssi = ev->data[ev->length];
 			process_adv_report(hdev, ev->evt_type, &ev->bdaddr,
 					   ev->bdaddr_type, NULL, 0, rssi,
 					   ev->data, ev->length);
+		} else {
+			bt_dev_err(hdev, "Dropping invalid advertising data");
+		}
 
 		ptr += sizeof(*ev) + ev->length + 1;
 	}

net/bluetooth/hci_request.c

@@ -122,7 +122,6 @@ void hci_req_sync_cancel(struct hci_dev *hdev, int err)
 struct sk_buff *__hci_cmd_sync_ev(struct hci_dev *hdev, u16 opcode, u32 plen,
 				  const void *param, u8 event, u32 timeout)
 {
-	DECLARE_WAITQUEUE(wait, current);
 	struct hci_request req;
 	struct sk_buff *skb;
 	int err = 0;
@@ -135,21 +134,14 @@ struct sk_buff *__hci_cmd_sync_ev(struct hci_dev *hdev, u16 opcode, u32 plen,
 
 	hdev->req_status = HCI_REQ_PEND;
 
-	add_wait_queue(&hdev->req_wait_q, &wait);
-	set_current_state(TASK_INTERRUPTIBLE);
-
 	err = hci_req_run_skb(&req, hci_req_sync_complete);
-	if (err < 0) {
-		remove_wait_queue(&hdev->req_wait_q, &wait);
-		set_current_state(TASK_RUNNING);
+	if (err < 0)
 		return ERR_PTR(err);
-	}
 
-	schedule_timeout(timeout);
+	err = wait_event_interruptible_timeout(hdev->req_wait_q,
+			hdev->req_status != HCI_REQ_PEND, timeout);
 
-	remove_wait_queue(&hdev->req_wait_q, &wait);
-
-	if (signal_pending(current))
+	if (err == -ERESTARTSYS)
 		return ERR_PTR(-EINTR);
 
 	switch (hdev->req_status) {
@@ -197,7 +189,6 @@ int __hci_req_sync(struct hci_dev *hdev, int (*func)(struct hci_request *req,
 		   unsigned long opt, u32 timeout, u8 *hci_status)
 {
 	struct hci_request req;
-	DECLARE_WAITQUEUE(wait, current);
 	int err = 0;
 
 	BT_DBG("%s start", hdev->name);
@@ -213,16 +204,10 @@ int __hci_req_sync(struct hci_dev *hdev, int (*func)(struct hci_request *req,
 		return err;
 	}
 
-	add_wait_queue(&hdev->req_wait_q, &wait);
-	set_current_state(TASK_INTERRUPTIBLE);
-
 	err = hci_req_run_skb(&req, hci_req_sync_complete);
 	if (err < 0) {
 		hdev->req_status = 0;
 
-		remove_wait_queue(&hdev->req_wait_q, &wait);
-		set_current_state(TASK_RUNNING);
-
 		/* ENODATA means the HCI request command queue is empty.
 		 * This can happen when a request with conditionals doesn't
 		 * trigger any commands to be sent. This is normal behavior
@@ -240,11 +225,10 @@ int __hci_req_sync(struct hci_dev *hdev, int (*func)(struct hci_request *req,
 		return err;
 	}
 
-	schedule_timeout(timeout);
-
-	remove_wait_queue(&hdev->req_wait_q, &wait);
+	err = wait_event_interruptible_timeout(hdev->req_wait_q,
+			hdev->req_status != HCI_REQ_PEND, timeout);
 
-	if (signal_pending(current))
+	if (err == -ERESTARTSYS)
 		return -EINTR;
 
 	switch (hdev->req_status) {