Commit 2cb5183d authored by Andi Kleen's avatar Andi Kleen Committed by David S. Miller

[E1000]: Add LLTX support.

Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent b9c5f4fd
......@@ -499,6 +499,8 @@ e1000_probe(struct pci_dev *pdev,
if(pci_using_dac)
netdev->features |= NETIF_F_HIGHDMA;
/* hard_start_xmit is safe against parallel locking */
netdev->features |= NETIF_F_LLTX;
adapter->en_mng_pt = e1000_enable_mng_pass_thru(&adapter->hw);
......@@ -1276,9 +1278,12 @@ e1000_set_multi(struct net_device *netdev)
uint32_t rctl;
uint32_t hash_value;
int i;
unsigned long flags;
/* Check for Promiscuous and All Multicast modes */
spin_lock_irqsave(&adapter->tx_lock, flags);
rctl = E1000_READ_REG(hw, RCTL);
if(netdev->flags & IFF_PROMISC) {
......@@ -1327,6 +1332,8 @@ e1000_set_multi(struct net_device *netdev)
if(hw->mac_type == e1000_82542_rev2_0)
e1000_leave_82542_rst(adapter);
spin_unlock_irqrestore(&adapter->tx_lock, flags);
}
/* Need to wait a few seconds after link up to get diagnostic information from
......@@ -1806,7 +1813,12 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
if(adapter->pcix_82544)
count += nr_frags;
spin_lock_irqsave(&adapter->tx_lock, flags);
local_irq_save(flags);
if (!spin_trylock(&adapter->tx_lock)) {
/* Collision - tell upper layer to requeue */
local_irq_restore(flags);
return -1;
}
/* need: count + 2 desc gap to keep tail from touching
* head, otherwise try next time */
......@@ -1816,12 +1828,11 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
return 1;
}
spin_unlock_irqrestore(&adapter->tx_lock, flags);
if(unlikely(adapter->hw.mac_type == e1000_82547)) {
if(unlikely(e1000_82547_fifo_workaround(adapter, skb))) {
netif_stop_queue(netdev);
mod_timer(&adapter->tx_fifo_stall_timer, jiffies);
spin_unlock_irqrestore(&adapter->tx_lock, flags);
return 1;
}
}
......@@ -1844,6 +1855,7 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
netdev->trans_start = jiffies;
spin_unlock_irqrestore(&adapter->tx_lock, flags);
return 0;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment