Commit 2d05ae6b authored by Julian Calaby's avatar Julian Calaby Committed by Mauro Carvalho Chehab

V4L/DVB (3340): Add bttv card MagicTV (rebranded MachTV)


- Add bttv card MagicTV (rebranded MachTV)
Signed-off-by: default avatarJulian Calaby <julian.calaby@gmail.com>
Signed-off-by: default avatarMichael Krufky <mkrufky@m1k.net>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@infradead.org>
parent 30367bfd
......@@ -142,3 +142,4 @@
141 -> Asound Skyeye PCTV
142 -> Sabrent TV-FM (bttv version)
143 -> Hauppauge ImpactVCB (bt878) [0070:13eb]
144 -> MagicTV
......@@ -2836,6 +2836,29 @@ struct tvcard bttv_tvcards[] = {
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
},
[BTTV_BOARD_MACHTV_MAGICTV] = {
/* Julian Calaby <julian.calaby@gmail.com>
* Slightly different from original MachTV definition (0x60)
* FIXME: RegSpy says gpiomask should be "0x001c800f", but it
* stuffs up remote chip. Bug is a pin on the jaecs is not set
* properly (methinks) causing no keyup bits being set */
.name = "MagicTV", /* rebranded MachTV */
.video_inputs = 3,
.audio_inputs = 1,
.tuner = 0,
.svhs = 2,
.gpiomask = 7,
.muxsel = { 2, 3, 1, 1 },
.audiomux = { 0, 1, 2, 3, 4 },
.tuner_type = TUNER_TEMIC_4009FR5_PAL,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.pll = PLL_28,
.has_radio = 1,
.has_remote = 1,
},
};
static const unsigned int bttv_num_tvcards = ARRAY_SIZE(bttv_tvcards);
......
......@@ -583,6 +583,12 @@ int bttv_input_init(struct bttv *btv)
btv->custom_irq = bttv_rc5_irq;
ir->rc5_gpio = 1;
break;
case BTTV_BOARD_MACHTV_MAGICTV:
ir_codes = ir_codes_apac_viewcomp;
ir->mask_keycode = 0x001F00;
ir->mask_keyup = 0x004000;
ir->polling = 50; /* ms */
break;
}
if (NULL == ir_codes) {
dprintk(KERN_INFO "Ooops: IR config error [card=%d]\n",btv->c.type);
......
......@@ -166,6 +166,7 @@
#define BTTV_BOARD_ASOUND_SKYEYE 0x8d
#define BTTV_BOARD_SABRENT_TVFM 0x8e
#define BTTV_BOARD_HAUPPAUGE_IMPACTVCB 0x8f
#define BTTV_BOARD_MACHTV_MAGICTV 0x90
/* i2c address list */
#define I2C_TSA5522 0xc2
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment