Commit 2d172691 authored by David Lechner's avatar David Lechner Committed by Stephen Boyd

clk: davinci: New driver for davinci PLL clocks

This adds a new driver for mach-davinci PLL clocks. This is porting the
code from arch/arm/mach-davinci/clock.c to the common clock framework.
Additionally, it adds device tree support for these clocks.

The ifeq ($(CONFIG_COMMON_CLK), y) in the Makefile is needed to prevent
compile errors until the clock code in arch/arm/mach-davinci is removed.

Note: although there are similar clocks for TI Keystone we are not able
to share the code for a few reasons. The keystone clocks are device tree
only and use legacy one-node-per-clock bindings. Also the register
layouts are a bit different, which would add even more if/else mess
to the keystone clocks. And the keystone PLL driver doesn't support
setting clock rates.
Signed-off-by: default avatarDavid Lechner <david@lechnology.com>
Signed-off-by: default avatarStephen Boyd <sboyd@kernel.org>
parent b6e37ce2
...@@ -13792,6 +13792,13 @@ F: arch/arm/mach-davinci/ ...@@ -13792,6 +13792,13 @@ F: arch/arm/mach-davinci/
F: drivers/i2c/busses/i2c-davinci.c F: drivers/i2c/busses/i2c-davinci.c
F: arch/arm/boot/dts/da850* F: arch/arm/boot/dts/da850*
TI DAVINCI SERIES CLOCK DRIVER
M: David Lechner <david@lechnology.com>
R: Sekhar Nori <nsekhar@ti.com>
S: Maintained
F: Documentation/devicetree/bindings/clock/ti/davinci/
F: drivers/clk/davinci/
TI DAVINCI SERIES GPIO DRIVER TI DAVINCI SERIES GPIO DRIVER
M: Keerthy <j-keerthy@ti.com> M: Keerthy <j-keerthy@ti.com>
L: linux-gpio@vger.kernel.org L: linux-gpio@vger.kernel.org
......
...@@ -61,6 +61,7 @@ obj-$(CONFIG_ARCH_ARTPEC) += axis/ ...@@ -61,6 +61,7 @@ obj-$(CONFIG_ARCH_ARTPEC) += axis/
obj-$(CONFIG_ARC_PLAT_AXS10X) += axs10x/ obj-$(CONFIG_ARC_PLAT_AXS10X) += axs10x/
obj-y += bcm/ obj-y += bcm/
obj-$(CONFIG_ARCH_BERLIN) += berlin/ obj-$(CONFIG_ARCH_BERLIN) += berlin/
obj-$(CONFIG_ARCH_DAVINCI) += davinci/
obj-$(CONFIG_H8300) += h8300/ obj-$(CONFIG_H8300) += h8300/
obj-$(CONFIG_ARCH_HISI) += hisilicon/ obj-$(CONFIG_ARCH_HISI) += hisilicon/
obj-y += imgtec/ obj-y += imgtec/
......
# SPDX-License-Identifier: GPL-2.0
ifeq ($(CONFIG_COMMON_CLK), y)
obj-y += pll.o
endif
// SPDX-License-Identifier: GPL-2.0
/*
* PLL clock driver for TI Davinci SoCs
*
* Copyright (C) 2018 David Lechner <david@lechnology.com>
*
* Based on arch/arm/mach-davinci/clock.c
* Copyright (C) 2006-2007 Texas Instruments.
* Copyright (C) 2008-2009 Deep Root Systems, LLC
*/
#include <linux/clk-provider.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/mfd/syscon.h>
#include <linux/notifier.h>
#include <linux/of_address.h>
#include <linux/of_device.h>
#include <linux/of.h>
#include <linux/platform_data/clk-davinci-pll.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/slab.h>
#include <linux/types.h>
#include "pll.h"
#define MAX_NAME_SIZE 20
#define OSCIN_CLK_NAME "oscin"
#define REVID 0x000
#define PLLCTL 0x100
#define OCSEL 0x104
#define PLLSECCTL 0x108
#define PLLM 0x110
#define PREDIV 0x114
#define PLLDIV1 0x118
#define PLLDIV2 0x11c
#define PLLDIV3 0x120
#define OSCDIV 0x124
#define POSTDIV 0x128
#define BPDIV 0x12c
#define PLLCMD 0x138
#define PLLSTAT 0x13c
#define ALNCTL 0x140
#define DCHANGE 0x144
#define CKEN 0x148
#define CKSTAT 0x14c
#define SYSTAT 0x150
#define PLLDIV4 0x160
#define PLLDIV5 0x164
#define PLLDIV6 0x168
#define PLLDIV7 0x16c
#define PLLDIV8 0x170
#define PLLDIV9 0x174
#define PLLCTL_PLLEN BIT(0)
#define PLLCTL_PLLPWRDN BIT(1)
#define PLLCTL_PLLRST BIT(3)
#define PLLCTL_PLLDIS BIT(4)
#define PLLCTL_PLLENSRC BIT(5)
#define PLLCTL_CLKMODE BIT(8)
/* shared by most *DIV registers */
#define DIV_RATIO_SHIFT 0
#define DIV_RATIO_WIDTH 5
#define DIV_ENABLE_SHIFT 15
#define PLLCMD_GOSET BIT(0)
#define PLLSTAT_GOSTAT BIT(0)
#define CKEN_OBSCLK_SHIFT 1
#define CKEN_AUXEN_SHIFT 0
/*
* OMAP-L138 system reference guide recommends a wait for 4 OSCIN/CLKIN
* cycles to ensure that the PLLC has switched to bypass mode. Delay of 1us
* ensures we are good for all > 4MHz OSCIN/CLKIN inputs. Typically the input
* is ~25MHz. Units are micro seconds.
*/
#define PLL_BYPASS_TIME 1
/* From OMAP-L138 datasheet table 6-4. Units are micro seconds */
#define PLL_RESET_TIME 1
/*
* From OMAP-L138 datasheet table 6-4; assuming prediv = 1, sqrt(pllm) = 4
* Units are micro seconds.
*/
#define PLL_LOCK_TIME 20
/**
* struct davinci_pll_clk - Main PLL clock (aka PLLOUT)
* @hw: clk_hw for the pll
* @base: Base memory address
* @pllm_min: The minimum allowable PLLM[PLLM] value
* @pllm_max: The maxiumum allowable PLLM[PLLM] value
* @pllm_mask: Bitmask for PLLM[PLLM] value
*/
struct davinci_pll_clk {
struct clk_hw hw;
void __iomem *base;
u32 pllm_min;
u32 pllm_max;
u32 pllm_mask;
};
#define to_davinci_pll_clk(_hw) \
container_of((_hw), struct davinci_pll_clk, hw)
static unsigned long davinci_pll_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
struct davinci_pll_clk *pll = to_davinci_pll_clk(hw);
unsigned long rate = parent_rate;
u32 mult;
mult = readl(pll->base + PLLM) & pll->pllm_mask;
rate *= mult + 1;
return rate;
}
static int davinci_pll_determine_rate(struct clk_hw *hw,
struct clk_rate_request *req)
{
struct davinci_pll_clk *pll = to_davinci_pll_clk(hw);
struct clk_hw *parent = req->best_parent_hw;
unsigned long parent_rate = req->best_parent_rate;
unsigned long rate = req->rate;
unsigned long best_rate, r;
u32 mult;
/* there is a limited range of valid outputs (see datasheet) */
if (rate < req->min_rate)
return -EINVAL;
rate = min(rate, req->max_rate);
mult = rate / parent_rate;
best_rate = parent_rate * mult;
/* easy case when there is no PREDIV */
if (!(clk_hw_get_flags(hw) & CLK_SET_RATE_PARENT)) {
if (best_rate < req->min_rate)
return -EINVAL;
if (mult < pll->pllm_min || mult > pll->pllm_max)
return -EINVAL;
req->rate = best_rate;
return 0;
}
/* see if the PREDIV clock can help us */
best_rate = 0;
for (mult = pll->pllm_min; mult <= pll->pllm_max; mult++) {
parent_rate = clk_hw_round_rate(parent, rate / mult);
r = parent_rate * mult;
if (r < req->min_rate)
continue;
if (r > rate || r > req->max_rate)
break;
if (r > best_rate) {
best_rate = r;
req->rate = best_rate;
req->best_parent_rate = parent_rate;
if (best_rate == rate)
break;
}
}
return 0;
}
static int davinci_pll_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate)
{
struct davinci_pll_clk *pll = to_davinci_pll_clk(hw);
u32 mult;
mult = rate / parent_rate;
writel(mult - 1, pll->base + PLLM);
return 0;
}
#ifdef CONFIG_DEBUG_FS
static int davinci_pll_debug_init(struct clk_hw *hw, struct dentry *dentry);
#else
#define davinci_pll_debug_init NULL
#endif
static const struct clk_ops davinci_pll_ops = {
.recalc_rate = davinci_pll_recalc_rate,
.determine_rate = davinci_pll_determine_rate,
.set_rate = davinci_pll_set_rate,
.debug_init = davinci_pll_debug_init,
};
/* PLLM works differently on DM365 */
static unsigned long dm365_pll_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
struct davinci_pll_clk *pll = to_davinci_pll_clk(hw);
unsigned long rate = parent_rate;
u32 mult;
mult = readl(pll->base + PLLM) & pll->pllm_mask;
rate *= mult * 2;
return rate;
}
static const struct clk_ops dm365_pll_ops = {
.recalc_rate = dm365_pll_recalc_rate,
.debug_init = davinci_pll_debug_init,
};
/**
* davinci_pll_div_register - common *DIV clock implementation
* @name: the clock name
* @parent_name: the parent clock name
* @reg: the *DIV register
* @fixed: if true, the divider is a fixed value
* @flags: bitmap of CLK_* flags from clock-provider.h
*/
static struct clk *davinci_pll_div_register(struct device *dev,
const char *name,
const char *parent_name,
void __iomem *reg,
bool fixed, u32 flags)
{
const char * const *parent_names = parent_name ? &parent_name : NULL;
int num_parents = parent_name ? 1 : 0;
const struct clk_ops *divider_ops = &clk_divider_ops;
struct clk_gate *gate;
struct clk_divider *divider;
gate = devm_kzalloc(dev, sizeof(*gate), GFP_KERNEL);
if (!gate)
return ERR_PTR(-ENOMEM);
gate->reg = reg;
gate->bit_idx = DIV_ENABLE_SHIFT;
divider = devm_kzalloc(dev, sizeof(*divider), GFP_KERNEL);
if (!divider)
return ERR_PTR(-ENOMEM);
divider->reg = reg;
divider->shift = DIV_RATIO_SHIFT;
divider->width = DIV_RATIO_WIDTH;
if (fixed) {
divider->flags |= CLK_DIVIDER_READ_ONLY;
divider_ops = &clk_divider_ro_ops;
}
return clk_register_composite(dev, name, parent_names, num_parents,
NULL, NULL, &divider->hw, divider_ops,
&gate->hw, &clk_gate_ops, flags);
}
struct davinci_pllen_clk {
struct clk_hw hw;
void __iomem *base;
};
#define to_davinci_pllen_clk(_hw) \
container_of((_hw), struct davinci_pllen_clk, hw)
static const struct clk_ops davinci_pllen_ops = {
/* this clocks just uses the clock notification feature */
};
/*
* The PLL has to be switched into bypass mode while we are chaning the rate,
* so we do that on the PLLEN clock since it is the end of the line. This will
* switch to bypass before any of the parent clocks (PREDIV, PLL, POSTDIV) are
* changed and will switch back to the PLL after the changes have been made.
*/
static int davinci_pllen_rate_change(struct notifier_block *nb,
unsigned long flags, void *data)
{
struct clk_notifier_data *cnd = data;
struct clk_hw *hw = __clk_get_hw(cnd->clk);
struct davinci_pllen_clk *pll = to_davinci_pllen_clk(hw);
u32 ctrl;
ctrl = readl(pll->base + PLLCTL);
if (flags == PRE_RATE_CHANGE) {
/* Switch the PLL to bypass mode */
ctrl &= ~(PLLCTL_PLLENSRC | PLLCTL_PLLEN);
writel(ctrl, pll->base + PLLCTL);
udelay(PLL_BYPASS_TIME);
/* Reset and enable PLL */
ctrl &= ~(PLLCTL_PLLRST | PLLCTL_PLLDIS);
writel(ctrl, pll->base + PLLCTL);
} else {
udelay(PLL_RESET_TIME);
/* Bring PLL out of reset */
ctrl |= PLLCTL_PLLRST;
writel(ctrl, pll->base + PLLCTL);
udelay(PLL_LOCK_TIME);
/* Remove PLL from bypass mode */
ctrl |= PLLCTL_PLLEN;
writel(ctrl, pll->base + PLLCTL);
}
return NOTIFY_OK;
}
static struct davinci_pll_platform_data *davinci_pll_get_pdata(struct device *dev)
{
struct davinci_pll_platform_data *pdata = dev_get_platdata(dev);
/*
* Platform data is optional, so allocate a new struct if one was not
* provided. For device tree, this will always be the case.
*/
if (!pdata)
pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
if (!pdata)
return NULL;
/* for device tree, we need to fill in the struct */
if (dev->of_node)
pdata->cfgchip =
syscon_regmap_lookup_by_compatible("ti,da830-cfgchip");
return pdata;
}
static struct notifier_block davinci_pllen_notifier = {
.notifier_call = davinci_pllen_rate_change,
};
/**
* davinci_pll_clk_register - Register a PLL clock
* @info: The device-specific clock info
* @parent_name: The parent clock name
* @base: The PLL's memory region
*
* This creates a series of clocks that represent the PLL.
*
* OSCIN > [PREDIV >] PLL > [POSTDIV >] PLLEN
*
* - OSCIN is the parent clock (on secondary PLL, may come from primary PLL)
* - PREDIV and POSTDIV are optional (depends on the PLL controller)
* - PLL is the PLL output (aka PLLOUT)
* - PLLEN is the bypass multiplexer
*
* Returns: The PLLOUT clock or a negative error code.
*/
struct clk *davinci_pll_clk_register(struct device *dev,
const struct davinci_pll_clk_info *info,
const char *parent_name,
void __iomem *base)
{
struct davinci_pll_platform_data *pdata;
char prediv_name[MAX_NAME_SIZE];
char pllout_name[MAX_NAME_SIZE];
char postdiv_name[MAX_NAME_SIZE];
char pllen_name[MAX_NAME_SIZE];
struct clk_init_data init;
struct davinci_pll_clk *pllout;
struct davinci_pllen_clk *pllen;
struct clk *pllout_clk, *clk;
pdata = davinci_pll_get_pdata(dev);
if (!pdata)
return ERR_PTR(-ENOMEM);
if (info->flags & PLL_HAS_CLKMODE) {
/*
* If a PLL has PLLCTL[CLKMODE], then it is the primary PLL.
* We register a clock named "oscin" that serves as the internal
* "input clock" domain shared by both PLLs (if there are 2)
* and will be the parent clock to the AUXCLK, SYSCLKBP and
* OBSCLK domains. NB: The various TRMs use "OSCIN" to mean
* a number of different things. In this driver we use it to
* mean the signal after the PLLCTL[CLKMODE] switch.
*/
clk = clk_register_fixed_factor(dev, OSCIN_CLK_NAME,
parent_name, 0, 1, 1);
if (IS_ERR(clk))
return clk;
parent_name = OSCIN_CLK_NAME;
}
if (info->flags & PLL_HAS_PREDIV) {
bool fixed = info->flags & PLL_PREDIV_FIXED_DIV;
u32 flags = 0;
snprintf(prediv_name, MAX_NAME_SIZE, "%s_prediv", info->name);
if (info->flags & PLL_PREDIV_ALWAYS_ENABLED)
flags |= CLK_IS_CRITICAL;
/* Some? DM355 chips don't correctly report the PREDIV value */
if (info->flags & PLL_PREDIV_FIXED8)
clk = clk_register_fixed_factor(dev, prediv_name,
parent_name, flags, 1, 8);
else
clk = davinci_pll_div_register(dev, prediv_name,
parent_name, base + PREDIV, fixed, flags);
if (IS_ERR(clk))
return clk;
parent_name = prediv_name;
}
/* Unlock writing to PLL registers */
if (info->unlock_reg) {
if (IS_ERR_OR_NULL(pdata->cfgchip))
dev_warn(dev, "Failed to get CFGCHIP (%ld)\n",
PTR_ERR(pdata->cfgchip));
else
regmap_write_bits(pdata->cfgchip, info->unlock_reg,
info->unlock_mask, 0);
}
pllout = devm_kzalloc(dev, sizeof(*pllout), GFP_KERNEL);
if (!pllout)
return ERR_PTR(-ENOMEM);
snprintf(pllout_name, MAX_NAME_SIZE, "%s_pllout", info->name);
init.name = pllout_name;
if (info->flags & PLL_PLLM_2X)
init.ops = &dm365_pll_ops;
else
init.ops = &davinci_pll_ops;
init.parent_names = &parent_name;
init.num_parents = 1;
init.flags = 0;
if (info->flags & PLL_HAS_PREDIV)
init.flags |= CLK_SET_RATE_PARENT;
pllout->hw.init = &init;
pllout->base = base;
pllout->pllm_mask = info->pllm_mask;
pllout->pllm_min = info->pllm_min;
pllout->pllm_max = info->pllm_max;
pllout_clk = devm_clk_register(dev, &pllout->hw);
if (IS_ERR(pllout_clk))
return pllout_clk;
clk_hw_set_rate_range(&pllout->hw, info->pllout_min_rate,
info->pllout_max_rate);
parent_name = pllout_name;
if (info->flags & PLL_HAS_POSTDIV) {
bool fixed = info->flags & PLL_POSTDIV_FIXED_DIV;
u32 flags = CLK_SET_RATE_PARENT;
snprintf(postdiv_name, MAX_NAME_SIZE, "%s_postdiv", info->name);
if (info->flags & PLL_POSTDIV_ALWAYS_ENABLED)
flags |= CLK_IS_CRITICAL;
clk = davinci_pll_div_register(dev, postdiv_name, parent_name,
base + POSTDIV, fixed, flags);
if (IS_ERR(clk))
return clk;
parent_name = postdiv_name;
}
pllen = devm_kzalloc(dev, sizeof(*pllout), GFP_KERNEL);
if (!pllen)
return ERR_PTR(-ENOMEM);
snprintf(pllen_name, MAX_NAME_SIZE, "%s_pllen", info->name);
init.name = pllen_name;
init.ops = &davinci_pllen_ops;
init.parent_names = &parent_name;
init.num_parents = 1;
init.flags = CLK_SET_RATE_PARENT;
pllen->hw.init = &init;
pllen->base = base;
clk = devm_clk_register(dev, &pllen->hw);
if (IS_ERR(clk))
return clk;
clk_notifier_register(clk, &davinci_pllen_notifier);
return pllout_clk;
}
/**
* davinci_pll_auxclk_register - Register bypass clock (AUXCLK)
* @name: The clock name
* @base: The PLL memory region
*/
struct clk *davinci_pll_auxclk_register(struct device *dev,
const char *name,
void __iomem *base)
{
return clk_register_gate(dev, name, OSCIN_CLK_NAME, 0, base + CKEN,
CKEN_AUXEN_SHIFT, 0, NULL);
}
/**
* davinci_pll_sysclkbp_clk_register - Register bypass divider clock (SYSCLKBP)
* @name: The clock name
* @base: The PLL memory region
*/
struct clk *davinci_pll_sysclkbp_clk_register(struct device *dev,
const char *name,
void __iomem *base)
{
return clk_register_divider(dev, name, OSCIN_CLK_NAME, 0, base + BPDIV,
DIV_RATIO_SHIFT, DIV_RATIO_WIDTH,
CLK_DIVIDER_READ_ONLY, NULL);
}
/**
* davinci_pll_obsclk_register - Register oscillator divider clock (OBSCLK)
* @info: The clock info
* @base: The PLL memory region
*/
struct clk *
davinci_pll_obsclk_register(struct device *dev,
const struct davinci_pll_obsclk_info *info,
void __iomem *base)
{
struct clk_mux *mux;
struct clk_gate *gate;
struct clk_divider *divider;
u32 oscdiv;
mux = devm_kzalloc(dev, sizeof(*mux), GFP_KERNEL);
if (!mux)
return ERR_PTR(-ENOMEM);
mux->reg = base + OCSEL;
mux->table = info->table;
mux->mask = info->ocsrc_mask;
gate = devm_kzalloc(dev, sizeof(*gate), GFP_KERNEL);
if (!gate)
return ERR_PTR(-ENOMEM);
gate->reg = base + CKEN;
gate->bit_idx = CKEN_OBSCLK_SHIFT;
divider = devm_kzalloc(dev, sizeof(*divider), GFP_KERNEL);
if (!divider)
return ERR_PTR(-ENOMEM);
divider->reg = base + OSCDIV;
divider->shift = DIV_RATIO_SHIFT;
divider->width = DIV_RATIO_WIDTH;
/* make sure divider is enabled just in case bootloader disabled it */
oscdiv = readl(base + OSCDIV);
oscdiv |= BIT(DIV_ENABLE_SHIFT);
writel(oscdiv, base + OSCDIV);
return clk_register_composite(dev, info->name, info->parent_names,
info->num_parents,
&mux->hw, &clk_mux_ops,
&divider->hw, &clk_divider_ops,
&gate->hw, &clk_gate_ops, 0);
}
/* The PLL SYSCLKn clocks have a mechanism for synchronizing rate changes. */
static int davinci_pll_sysclk_rate_change(struct notifier_block *nb,
unsigned long flags, void *data)
{
struct clk_notifier_data *cnd = data;
struct clk_hw *hw = __clk_get_hw(clk_get_parent(cnd->clk));
struct davinci_pllen_clk *pll = to_davinci_pllen_clk(hw);
u32 pllcmd, pllstat;
switch (flags) {
case POST_RATE_CHANGE:
/* apply the changes */
pllcmd = readl(pll->base + PLLCMD);
pllcmd |= PLLCMD_GOSET;
writel(pllcmd, pll->base + PLLCMD);
/* fallthrough */
case PRE_RATE_CHANGE:
/* Wait until for outstanding changes to take effect */
do {
pllstat = readl(pll->base + PLLSTAT);
} while (pllstat & PLLSTAT_GOSTAT);
break;
}
return NOTIFY_OK;
}
static struct notifier_block davinci_pll_sysclk_notifier = {
.notifier_call = davinci_pll_sysclk_rate_change,
};
/**
* davinci_pll_sysclk_register - Register divider clocks (SYSCLKn)
* @info: The clock info
* @base: The PLL memory region
*/
struct clk *
davinci_pll_sysclk_register(struct device *dev,
const struct davinci_pll_sysclk_info *info,
void __iomem *base)
{
const struct clk_ops *divider_ops = &clk_divider_ops;
struct clk_gate *gate;
struct clk_divider *divider;
struct clk *clk;
u32 reg;
u32 flags = 0;
/* PLLDIVn registers are not entirely consecutive */
if (info->id < 4)
reg = PLLDIV1 + 4 * (info->id - 1);
else
reg = PLLDIV4 + 4 * (info->id - 4);
gate = devm_kzalloc(dev, sizeof(*gate), GFP_KERNEL);
if (!gate)
return ERR_PTR(-ENOMEM);
gate->reg = base + reg;
gate->bit_idx = DIV_ENABLE_SHIFT;
divider = devm_kzalloc(dev, sizeof(*divider), GFP_KERNEL);
if (!divider)
return ERR_PTR(-ENOMEM);
divider->reg = base + reg;
divider->shift = DIV_RATIO_SHIFT;
divider->width = info->ratio_width;
divider->flags = 0;
if (info->flags & SYSCLK_FIXED_DIV) {
divider->flags |= CLK_DIVIDER_READ_ONLY;
divider_ops = &clk_divider_ro_ops;
}
/* Only the ARM clock can change the parent PLL rate */
if (info->flags & SYSCLK_ARM_RATE)
flags |= CLK_SET_RATE_PARENT;
if (info->flags & SYSCLK_ALWAYS_ENABLED)
flags |= CLK_IS_CRITICAL;
clk = clk_register_composite(dev, info->name, &info->parent_name, 1,
NULL, NULL, &divider->hw, divider_ops,
&gate->hw, &clk_gate_ops, flags);
if (IS_ERR(clk))
return clk;
clk_notifier_register(clk, &davinci_pll_sysclk_notifier);
return clk;
}
int of_davinci_pll_init(struct device *dev,
const struct davinci_pll_clk_info *info,
const struct davinci_pll_obsclk_info *obsclk_info,
const struct davinci_pll_sysclk_info **div_info,
u8 max_sysclk_id,
void __iomem *base)
{
struct device_node *node = dev->of_node;
struct device_node *child;
const char *parent_name;
struct clk *clk;
if (info->flags & PLL_HAS_CLKMODE)
parent_name = of_clk_get_parent_name(node, 0);
else
parent_name = OSCIN_CLK_NAME;
clk = davinci_pll_clk_register(dev, info, parent_name, base);
if (IS_ERR(clk)) {
dev_err(dev, "failed to register %s\n", info->name);
return PTR_ERR(clk);
}
child = of_get_child_by_name(node, "pllout");
if (of_device_is_available(child))
of_clk_add_provider(child, of_clk_src_simple_get, clk);
of_node_put(child);
child = of_get_child_by_name(node, "sysclk");
if (of_device_is_available(child)) {
struct clk_onecell_data *clk_data;
struct clk **clks;
int n_clks = max_sysclk_id + 1;
int i;
clk_data = devm_kzalloc(dev, sizeof(*clk_data), GFP_KERNEL);
if (!clk_data)
return -ENOMEM;
clks = devm_kmalloc_array(dev, n_clks, sizeof(*clks), GFP_KERNEL);
if (!clks)
return -ENOMEM;
clk_data->clks = clks;
clk_data->clk_num = n_clks;
for (i = 0; i < n_clks; i++)
clks[i] = ERR_PTR(-ENOENT);
for (; *div_info; div_info++) {
clk = davinci_pll_sysclk_register(dev, *div_info, base);
if (IS_ERR(clk))
dev_warn(dev, "failed to register %s (%ld)\n",
(*div_info)->name, PTR_ERR(clk));
else
clks[(*div_info)->id] = clk;
}
of_clk_add_provider(child, of_clk_src_onecell_get, clk_data);
}
of_node_put(child);
child = of_get_child_by_name(node, "auxclk");
if (of_device_is_available(child)) {
char child_name[MAX_NAME_SIZE];
snprintf(child_name, MAX_NAME_SIZE, "%s_auxclk", info->name);
clk = davinci_pll_auxclk_register(dev, child_name, base);
if (IS_ERR(clk))
dev_warn(dev, "failed to register %s (%ld)\n",
child_name, PTR_ERR(clk));
else
of_clk_add_provider(child, of_clk_src_simple_get, clk);
}
of_node_put(child);
child = of_get_child_by_name(node, "obsclk");
if (of_device_is_available(child)) {
if (obsclk_info)
clk = davinci_pll_obsclk_register(dev, obsclk_info, base);
else
clk = ERR_PTR(-EINVAL);
if (IS_ERR(clk))
dev_warn(dev, "failed to register obsclk (%ld)\n",
PTR_ERR(clk));
else
of_clk_add_provider(child, of_clk_src_simple_get, clk);
}
of_node_put(child);
return 0;
}
static const struct of_device_id davinci_pll_of_match[] = {
{ }
};
static const struct platform_device_id davinci_pll_id_table[] = {
{ }
};
typedef int (*davinci_pll_init)(struct device *dev, void __iomem *base);
static int davinci_pll_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
const struct of_device_id *of_id;
davinci_pll_init pll_init = NULL;
struct resource *res;
void __iomem *base;
of_id = of_match_device(davinci_pll_of_match, dev);
if (of_id)
pll_init = of_id->data;
else if (pdev->id_entry)
pll_init = (void *)pdev->id_entry->driver_data;
if (!pll_init) {
dev_err(dev, "unable to find driver data\n");
return -EINVAL;
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
base = devm_ioremap_resource(dev, res);
if (IS_ERR(base)) {
dev_err(dev, "ioremap failed\n");
return PTR_ERR(base);
}
return pll_init(dev, base);
}
static struct platform_driver davinci_pll_driver = {
.probe = davinci_pll_probe,
.driver = {
.name = "davinci-pll-clk",
.of_match_table = davinci_pll_of_match,
},
.id_table = davinci_pll_id_table,
};
static int __init davinci_pll_driver_init(void)
{
return platform_driver_register(&davinci_pll_driver);
}
/* has to be postcore_initcall because PSC devices depend on PLL parent clocks */
postcore_initcall(davinci_pll_driver_init);
#ifdef CONFIG_DEBUG_FS
#include <linux/debugfs.h>
#define DEBUG_REG(n) \
{ \
.name = #n, \
.offset = n, \
}
static const struct debugfs_reg32 davinci_pll_regs[] = {
DEBUG_REG(REVID),
DEBUG_REG(PLLCTL),
DEBUG_REG(OCSEL),
DEBUG_REG(PLLSECCTL),
DEBUG_REG(PLLM),
DEBUG_REG(PREDIV),
DEBUG_REG(PLLDIV1),
DEBUG_REG(PLLDIV2),
DEBUG_REG(PLLDIV3),
DEBUG_REG(OSCDIV),
DEBUG_REG(POSTDIV),
DEBUG_REG(BPDIV),
DEBUG_REG(PLLCMD),
DEBUG_REG(PLLSTAT),
DEBUG_REG(ALNCTL),
DEBUG_REG(DCHANGE),
DEBUG_REG(CKEN),
DEBUG_REG(CKSTAT),
DEBUG_REG(SYSTAT),
DEBUG_REG(PLLDIV4),
DEBUG_REG(PLLDIV5),
DEBUG_REG(PLLDIV6),
DEBUG_REG(PLLDIV7),
DEBUG_REG(PLLDIV8),
DEBUG_REG(PLLDIV9),
};
static int davinci_pll_debug_init(struct clk_hw *hw, struct dentry *dentry)
{
struct davinci_pll_clk *pll = to_davinci_pll_clk(hw);
struct debugfs_regset32 *regset;
struct dentry *d;
regset = kzalloc(sizeof(*regset), GFP_KERNEL);
if (!regset)
return -ENOMEM;
regset->regs = davinci_pll_regs;
regset->nregs = ARRAY_SIZE(davinci_pll_regs);
regset->base = pll->base;
d = debugfs_create_regset32("registers", 0400, dentry, regset);
if (IS_ERR(d)) {
kfree(regset);
return PTR_ERR(d);
}
return 0;
}
#endif
// SPDX-License-Identifier: GPL-2.0
/*
* Clock driver for TI Davinci PSC controllers
*
* Copyright (C) 2018 David Lechner <david@lechnology.com>
*/
#ifndef __CLK_DAVINCI_PLL_H___
#define __CLK_DAVINCI_PLL_H___
#include <linux/bitops.h>
#include <linux/clk-provider.h>
#include <linux/of.h>
#include <linux/types.h>
#define PLL_HAS_CLKMODE BIT(0) /* PLL has PLLCTL[CLKMODE] */
#define PLL_HAS_PREDIV BIT(1) /* has prediv before PLL */
#define PLL_PREDIV_ALWAYS_ENABLED BIT(2) /* don't clear DEN bit */
#define PLL_PREDIV_FIXED_DIV BIT(3) /* fixed divider value */
#define PLL_HAS_POSTDIV BIT(4) /* has postdiv after PLL */
#define PLL_POSTDIV_ALWAYS_ENABLED BIT(5) /* don't clear DEN bit */
#define PLL_POSTDIV_FIXED_DIV BIT(6) /* fixed divider value */
#define PLL_HAS_EXTCLKSRC BIT(7) /* has selectable bypass */
#define PLL_PLLM_2X BIT(8) /* PLLM value is 2x (DM365) */
#define PLL_PREDIV_FIXED8 BIT(9) /* DM355 quirk */
/** davinci_pll_clk_info - controller-specific PLL info
* @name: The name of the PLL
* @unlock_reg: Option CFGCHIP register for unlocking PLL
* @unlock_mask: Bitmask used with @unlock_reg
* @pllm_mask: Bitmask for PLLM[PLLM] value
* @pllm_min: Minimum allowable value for PLLM[PLLM]
* @pllm_max: Maximum allowable value for PLLM[PLLM]
* @pllout_min_rate: Minimum allowable rate for PLLOUT
* @pllout_max_rate: Maximum allowable rate for PLLOUT
* @flags: Bitmap of PLL_* flags.
*/
struct davinci_pll_clk_info {
const char *name;
u32 unlock_reg;
u32 unlock_mask;
u32 pllm_mask;
u32 pllm_min;
u32 pllm_max;
unsigned long pllout_min_rate;
unsigned long pllout_max_rate;
u32 flags;
};
#define SYSCLK_ARM_RATE BIT(0) /* Controls ARM rate */
#define SYSCLK_ALWAYS_ENABLED BIT(1) /* Or bad things happen */
#define SYSCLK_FIXED_DIV BIT(2) /* Fixed divider */
/** davinci_pll_sysclk_info - SYSCLKn-specific info
* @name: The name of the clock
* @parent_name: The name of the parent clock
* @id: "n" in "SYSCLKn"
* @ratio_width: Width (in bits) of RATIO in PLLDIVn register
* @flags: Bitmap of SYSCLK_* flags.
*/
struct davinci_pll_sysclk_info {
const char *name;
const char *parent_name;
u32 id;
u32 ratio_width;
u32 flags;
};
#define SYSCLK(i, n, p, w, f) \
static const struct davinci_pll_sysclk_info n = { \
.name = #n, \
.parent_name = #p, \
.id = (i), \
.ratio_width = (w), \
.flags = (f), \
}
/** davinci_pll_obsclk_info - OBSCLK-specific info
* @name: The name of the clock
* @parent_names: Array of names of the parent clocks
* @num_parents: Length of @parent_names
* @table: Array of values to write to OCSEL[OCSRC] cooresponding to
* @parent_names
* @ocsrc_mask: Bitmask for OCSEL[OCSRC]
*/
struct davinci_pll_obsclk_info {
const char *name;
const char * const *parent_names;
u8 num_parents;
u32 *table;
u32 ocsrc_mask;
};
struct clk *davinci_pll_clk_register(struct device *dev,
const struct davinci_pll_clk_info *info,
const char *parent_name,
void __iomem *base);
struct clk *davinci_pll_auxclk_register(struct device *dev,
const char *name,
void __iomem *base);
struct clk *davinci_pll_sysclkbp_clk_register(struct device *dev,
const char *name,
void __iomem *base);
struct clk *
davinci_pll_obsclk_register(struct device *dev,
const struct davinci_pll_obsclk_info *info,
void __iomem *base);
struct clk *
davinci_pll_sysclk_register(struct device *dev,
const struct davinci_pll_sysclk_info *info,
void __iomem *base);
int of_davinci_pll_init(struct device *dev,
const struct davinci_pll_clk_info *info,
const struct davinci_pll_obsclk_info *obsclk_info,
const struct davinci_pll_sysclk_info **div_info,
u8 max_sysclk_id,
void __iomem *base);
#endif /* __CLK_DAVINCI_PLL_H___ */
// SPDX-License-Identifier: GPL-2.0
/*
* PLL clock driver for TI Davinci SoCs
*
* Copyright (C) 2018 David Lechner <david@lechnology.com>
*/
#ifndef __LINUX_PLATFORM_DATA_CLK_DAVINCI_PLL_H__
#define __LINUX_PLATFORM_DATA_CLK_DAVINCI_PLL_H__
#include <linux/regmap.h>
/**
* davinci_pll_platform_data
* @cfgchip: CFGCHIP syscon regmap
*/
struct davinci_pll_platform_data {
struct regmap *cfgchip;
};
#endif /* __LINUX_PLATFORM_DATA_CLK_DAVINCI_PLL_H__ */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment