Commit 2e0cbc4d authored by Ram Amrani's avatar Ram Amrani Committed by Doug Ledford

qedr: Add RoCE driver framework

Adds a skeletal implementation of the qed* RoCE driver -
basically the ability to communicate with the qede driver and
receive notifications from it regarding various init/exit events.
Signed-off-by: default avatarRajesh Borundia <rajesh.borundia@cavium.com>
Signed-off-by: default avatarRam Amrani <Ram.Amrani@cavium.com>
Signed-off-by: default avatarDoug Ledford <dledford@redhat.com>
parent e9f8f48b
...@@ -89,4 +89,6 @@ source "drivers/infiniband/sw/rxe/Kconfig" ...@@ -89,4 +89,6 @@ source "drivers/infiniband/sw/rxe/Kconfig"
source "drivers/infiniband/hw/hfi1/Kconfig" source "drivers/infiniband/hw/hfi1/Kconfig"
source "drivers/infiniband/hw/qedr/Kconfig"
endif # INFINIBAND endif # INFINIBAND
...@@ -10,3 +10,4 @@ obj-$(CONFIG_INFINIBAND_OCRDMA) += ocrdma/ ...@@ -10,3 +10,4 @@ obj-$(CONFIG_INFINIBAND_OCRDMA) += ocrdma/
obj-$(CONFIG_INFINIBAND_USNIC) += usnic/ obj-$(CONFIG_INFINIBAND_USNIC) += usnic/
obj-$(CONFIG_INFINIBAND_HFI1) += hfi1/ obj-$(CONFIG_INFINIBAND_HFI1) += hfi1/
obj-$(CONFIG_INFINIBAND_HNS) += hns/ obj-$(CONFIG_INFINIBAND_HNS) += hns/
obj-$(CONFIG_INFINIBAND_QEDR) += qedr/
config INFINIBAND_QEDR
tristate "QLogic RoCE driver"
depends on 64BIT && QEDE
select QED_LL2
---help---
This driver provides low-level InfiniBand over Ethernet
support for QLogic QED host channel adapters (HCAs).
obj-$(CONFIG_INFINIBAND_QEDR) := qedr.o
qedr-y := main.o
/* QLogic qedr NIC Driver
* Copyright (c) 2015-2016 QLogic Corporation
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
* General Public License (GPL) Version 2, available from the file
* COPYING in the main directory of this source tree, or the
* OpenIB.org BSD license below:
*
* Redistribution and use in source and binary forms, with or
* without modification, are permitted provided that the following
* conditions are met:
*
* - Redistributions of source code must retain the above
* copyright notice, this list of conditions and the following
* disclaimer.
*
* - Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and /or other materials
* provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/
#include <linux/module.h>
#include <rdma/ib_verbs.h>
#include <rdma/ib_addr.h>
#include <linux/netdevice.h>
#include <linux/iommu.h>
#include <net/addrconf.h>
#include <linux/qed/qede_roce.h>
#include "qedr.h"
MODULE_DESCRIPTION("QLogic 40G/100G ROCE Driver");
MODULE_AUTHOR("QLogic Corporation");
MODULE_LICENSE("Dual BSD/GPL");
MODULE_VERSION(QEDR_MODULE_VERSION);
void qedr_ib_dispatch_event(struct qedr_dev *dev, u8 port_num,
enum ib_event_type type)
{
struct ib_event ibev;
ibev.device = &dev->ibdev;
ibev.element.port_num = port_num;
ibev.event = type;
ib_dispatch_event(&ibev);
}
static enum rdma_link_layer qedr_link_layer(struct ib_device *device,
u8 port_num)
{
return IB_LINK_LAYER_ETHERNET;
}
static int qedr_register_device(struct qedr_dev *dev)
{
strlcpy(dev->ibdev.name, "qedr%d", IB_DEVICE_NAME_MAX);
memcpy(dev->ibdev.node_desc, QEDR_NODE_DESC, sizeof(QEDR_NODE_DESC));
dev->ibdev.owner = THIS_MODULE;
dev->ibdev.get_link_layer = qedr_link_layer;
return 0;
}
/* QEDR sysfs interface */
static ssize_t show_rev(struct device *device, struct device_attribute *attr,
char *buf)
{
struct qedr_dev *dev = dev_get_drvdata(device);
return scnprintf(buf, PAGE_SIZE, "0x%x\n", dev->pdev->vendor);
}
static ssize_t show_hca_type(struct device *device,
struct device_attribute *attr, char *buf)
{
return scnprintf(buf, PAGE_SIZE, "%s\n", "HCA_TYPE_TO_SET");
}
static DEVICE_ATTR(hw_rev, S_IRUGO, show_rev, NULL);
static DEVICE_ATTR(hca_type, S_IRUGO, show_hca_type, NULL);
static struct device_attribute *qedr_attributes[] = {
&dev_attr_hw_rev,
&dev_attr_hca_type
};
static void qedr_remove_sysfiles(struct qedr_dev *dev)
{
int i;
for (i = 0; i < ARRAY_SIZE(qedr_attributes); i++)
device_remove_file(&dev->ibdev.dev, qedr_attributes[i]);
}
static void qedr_pci_set_atomic(struct qedr_dev *dev, struct pci_dev *pdev)
{
struct pci_dev *bridge;
u32 val;
dev->atomic_cap = IB_ATOMIC_NONE;
bridge = pdev->bus->self;
if (!bridge)
return;
/* Check whether we are connected directly or via a switch */
while (bridge && bridge->bus->parent) {
DP_DEBUG(dev, QEDR_MSG_INIT,
"Device is not connected directly to root. bridge->bus->number=%d primary=%d\n",
bridge->bus->number, bridge->bus->primary);
/* Need to check Atomic Op Routing Supported all the way to
* root complex.
*/
pcie_capability_read_dword(bridge, PCI_EXP_DEVCAP2, &val);
if (!(val & PCI_EXP_DEVCAP2_ATOMIC_ROUTE)) {
pcie_capability_clear_word(pdev,
PCI_EXP_DEVCTL2,
PCI_EXP_DEVCTL2_ATOMIC_REQ);
return;
}
bridge = bridge->bus->parent->self;
}
bridge = pdev->bus->self;
/* according to bridge capability */
pcie_capability_read_dword(bridge, PCI_EXP_DEVCAP2, &val);
if (val & PCI_EXP_DEVCAP2_ATOMIC_COMP64) {
pcie_capability_set_word(pdev, PCI_EXP_DEVCTL2,
PCI_EXP_DEVCTL2_ATOMIC_REQ);
dev->atomic_cap = IB_ATOMIC_GLOB;
} else {
pcie_capability_clear_word(pdev, PCI_EXP_DEVCTL2,
PCI_EXP_DEVCTL2_ATOMIC_REQ);
}
}
static struct qedr_dev *qedr_add(struct qed_dev *cdev, struct pci_dev *pdev,
struct net_device *ndev)
{
struct qedr_dev *dev;
int rc = 0, i;
dev = (struct qedr_dev *)ib_alloc_device(sizeof(*dev));
if (!dev) {
pr_err("Unable to allocate ib device\n");
return NULL;
}
DP_DEBUG(dev, QEDR_MSG_INIT, "qedr add device called\n");
dev->pdev = pdev;
dev->ndev = ndev;
dev->cdev = cdev;
qedr_pci_set_atomic(dev, pdev);
rc = qedr_register_device(dev);
if (rc) {
DP_ERR(dev, "Unable to allocate register device\n");
goto init_err;
}
for (i = 0; i < ARRAY_SIZE(qedr_attributes); i++)
if (device_create_file(&dev->ibdev.dev, qedr_attributes[i]))
goto init_err;
DP_DEBUG(dev, QEDR_MSG_INIT, "qedr driver loaded successfully\n");
return dev;
init_err:
ib_dealloc_device(&dev->ibdev);
DP_ERR(dev, "qedr driver load failed rc=%d\n", rc);
return NULL;
}
static void qedr_remove(struct qedr_dev *dev)
{
/* First unregister with stack to stop all the active traffic
* of the registered clients.
*/
qedr_remove_sysfiles(dev);
ib_dealloc_device(&dev->ibdev);
}
static int qedr_close(struct qedr_dev *dev)
{
qedr_ib_dispatch_event(dev, 1, IB_EVENT_PORT_ERR);
return 0;
}
static void qedr_shutdown(struct qedr_dev *dev)
{
qedr_close(dev);
qedr_remove(dev);
}
/* event handling via NIC driver ensures that all the NIC specific
* initialization done before RoCE driver notifies
* event to stack.
*/
static void qedr_notify(struct qedr_dev *dev, enum qede_roce_event event)
{
switch (event) {
case QEDE_UP:
qedr_ib_dispatch_event(dev, 1, IB_EVENT_PORT_ACTIVE);
break;
case QEDE_DOWN:
qedr_close(dev);
break;
case QEDE_CLOSE:
qedr_shutdown(dev);
break;
case QEDE_CHANGE_ADDR:
qedr_ib_dispatch_event(dev, 1, IB_EVENT_GID_CHANGE);
break;
default:
pr_err("Event not supported\n");
}
}
static struct qedr_driver qedr_drv = {
.name = "qedr_driver",
.add = qedr_add,
.remove = qedr_remove,
.notify = qedr_notify,
};
static int __init qedr_init_module(void)
{
return qede_roce_register_driver(&qedr_drv);
}
static void __exit qedr_exit_module(void)
{
qede_roce_unregister_driver(&qedr_drv);
}
module_init(qedr_init_module);
module_exit(qedr_exit_module);
/* QLogic qedr NIC Driver
* Copyright (c) 2015-2016 QLogic Corporation
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
* General Public License (GPL) Version 2, available from the file
* COPYING in the main directory of this source tree, or the
* OpenIB.org BSD license below:
*
* Redistribution and use in source and binary forms, with or
* without modification, are permitted provided that the following
* conditions are met:
*
* - Redistributions of source code must retain the above
* copyright notice, this list of conditions and the following
* disclaimer.
*
* - Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and /or other materials
* provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/
#ifndef __QEDR_H__
#define __QEDR_H__
#include <linux/pci.h>
#include <rdma/ib_addr.h>
#include <linux/qed/qed_if.h>
#include <linux/qed/qede_roce.h>
#define QEDR_MODULE_VERSION "8.10.10.0"
#define QEDR_NODE_DESC "QLogic 579xx RoCE HCA"
#define DP_NAME(dev) ((dev)->ibdev.name)
#define DP_DEBUG(dev, module, fmt, ...) \
pr_debug("(%s) " module ": " fmt, \
DP_NAME(dev) ? DP_NAME(dev) : "", ## __VA_ARGS__)
#define QEDR_MSG_INIT "INIT"
struct qedr_dev {
struct ib_device ibdev;
struct qed_dev *cdev;
struct pci_dev *pdev;
struct net_device *ndev;
enum ib_atomic_cap atomic_cap;
u32 dp_module;
u8 dp_level;
};
#endif
...@@ -107,15 +107,4 @@ config QEDE ...@@ -107,15 +107,4 @@ config QEDE
---help--- ---help---
This enables the support for ... This enables the support for ...
config INFINIBAND_QEDR
tristate "QLogic qede RoCE sources [debug]"
depends on QEDE && 64BIT
select QED_LL2
default n
---help---
This provides a temporary node that allows the compilation
and logical testing of the InfiniBand over Ethernet support
for QLogic QED. This would be replaced by the 'real' option
once the QEDR driver is added [+relocated].
endif # NET_VENDOR_QLOGIC endif # NET_VENDOR_QLOGIC
...@@ -612,6 +612,8 @@ ...@@ -612,6 +612,8 @@
*/ */
#define PCI_EXP_DEVCAP2 36 /* Device Capabilities 2 */ #define PCI_EXP_DEVCAP2 36 /* Device Capabilities 2 */
#define PCI_EXP_DEVCAP2_ARI 0x00000020 /* Alternative Routing-ID */ #define PCI_EXP_DEVCAP2_ARI 0x00000020 /* Alternative Routing-ID */
#define PCI_EXP_DEVCAP2_ATOMIC_ROUTE 0x00000040 /* Atomic Op routing */
#define PCI_EXP_DEVCAP2_ATOMIC_COMP64 0x00000100 /* Atomic 64-bit compare */
#define PCI_EXP_DEVCAP2_LTR 0x00000800 /* Latency tolerance reporting */ #define PCI_EXP_DEVCAP2_LTR 0x00000800 /* Latency tolerance reporting */
#define PCI_EXP_DEVCAP2_OBFF_MASK 0x000c0000 /* OBFF support mechanism */ #define PCI_EXP_DEVCAP2_OBFF_MASK 0x000c0000 /* OBFF support mechanism */
#define PCI_EXP_DEVCAP2_OBFF_MSG 0x00040000 /* New message signaling */ #define PCI_EXP_DEVCAP2_OBFF_MSG 0x00040000 /* New message signaling */
...@@ -619,6 +621,7 @@ ...@@ -619,6 +621,7 @@
#define PCI_EXP_DEVCTL2 40 /* Device Control 2 */ #define PCI_EXP_DEVCTL2 40 /* Device Control 2 */
#define PCI_EXP_DEVCTL2_COMP_TIMEOUT 0x000f /* Completion Timeout Value */ #define PCI_EXP_DEVCTL2_COMP_TIMEOUT 0x000f /* Completion Timeout Value */
#define PCI_EXP_DEVCTL2_ARI 0x0020 /* Alternative Routing-ID */ #define PCI_EXP_DEVCTL2_ARI 0x0020 /* Alternative Routing-ID */
#define PCI_EXP_DEVCTL2_ATOMIC_REQ 0x0040 /* Set Atomic requests */
#define PCI_EXP_DEVCTL2_IDO_REQ_EN 0x0100 /* Allow IDO for requests */ #define PCI_EXP_DEVCTL2_IDO_REQ_EN 0x0100 /* Allow IDO for requests */
#define PCI_EXP_DEVCTL2_IDO_CMP_EN 0x0200 /* Allow IDO for completions */ #define PCI_EXP_DEVCTL2_IDO_CMP_EN 0x0200 /* Allow IDO for completions */
#define PCI_EXP_DEVCTL2_LTR_EN 0x0400 /* Enable LTR mechanism */ #define PCI_EXP_DEVCTL2_LTR_EN 0x0400 /* Enable LTR mechanism */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment