PCI: pciehp: Add reset_slot() method

PCIe hotplug has a bus per slot, so we can just use a normal
secondary bus reset.  However, if a slot supports surprise removal,
a bus reset can be seen as a presence detection change triggering
a hot-remove followed by a hot-add.  Disable presence detection from
triggering an interrupt or being polled around the bus reset.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

drivers/pci/hotplug/pciehp.h

@@ -155,6 +155,7 @@ void pciehp_green_led_off(struct slot *slot);
 void pciehp_green_led_blink(struct slot *slot);
 int pciehp_check_link_status(struct controller *ctrl);
 void pciehp_release_ctrl(struct controller *ctrl);
+int pciehp_reset_slot(struct slot *slot, int probe);
 
 static inline const char *slot_name(struct slot *slot)
 {

drivers/pci/hotplug/pciehp_core.c

@@ -69,6 +69,7 @@ static int get_power_status	(struct hotplug_slot *slot, u8 *value);
 static int get_attention_status	(struct hotplug_slot *slot, u8 *value);
 static int get_latch_status	(struct hotplug_slot *slot, u8 *value);
 static int get_adapter_status	(struct hotplug_slot *slot, u8 *value);
+static int reset_slot		(struct hotplug_slot *slot, int probe);
 
 /**
  * release_slot - free up the memory used by a slot
@@ -111,6 +112,7 @@ static int init_slot(struct controller *ctrl)
 	ops->disable_slot = disable_slot;
 	ops->get_power_status = get_power_status;
 	ops->get_adapter_status = get_adapter_status;
+	ops->reset_slot = reset_slot;
 	if (MRL_SENS(ctrl))
 		ops->get_latch_status = get_latch_status;
 	if (ATTN_LED(ctrl)) {
@@ -223,6 +225,16 @@ static int get_adapter_status(struct hotplug_slot *hotplug_slot, u8 *value)
 	return pciehp_get_adapter_status(slot, value);
 }
 
+static int reset_slot(struct hotplug_slot *hotplug_slot, int probe)
+{
+	struct slot *slot = hotplug_slot->private;
+
+	ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n",
+		 __func__, slot_name(slot));
+
+	return pciehp_reset_slot(slot, probe);
+}
+
 static int pciehp_probe(struct pcie_device *dev)
 {
 	int rc;

drivers/pci/hotplug/pciehp_hpc.c

@@ -749,6 +749,37 @@ static void pcie_disable_notification(struct controller *ctrl)
 		ctrl_warn(ctrl, "Cannot disable software notification\n");
 }
 
+/*
+ * pciehp has a 1:1 bus:slot relationship so we ultimately want a secondary
+ * bus reset of the bridge, but if the slot supports surprise removal we need
+ * to disable presence detection around the bus reset and clear any spurious
+ * events after.
+ */
+int pciehp_reset_slot(struct slot *slot, int probe)
+{
+	struct controller *ctrl = slot->ctrl;
+
+	if (probe)
+		return 0;
+
+	if (HP_SUPR_RM(ctrl)) {
+		pcie_write_cmd(ctrl, 0, PCI_EXP_SLTCTL_PDCE);
+		if (pciehp_poll_mode)
+			del_timer_sync(&ctrl->poll_timer);
+	}
+
+	pci_reset_bridge_secondary_bus(ctrl->pcie->port);
+
+	if (HP_SUPR_RM(ctrl)) {
+		pciehp_writew(ctrl, PCI_EXP_SLTSTA, PCI_EXP_SLTSTA_PDC);
+		pcie_write_cmd(ctrl, PCI_EXP_SLTCTL_PDCE, PCI_EXP_SLTCTL_PDCE);
+		if (pciehp_poll_mode)
+			int_poll_timeout(ctrl->poll_timer.data);
+	}
+
+	return 0;
+}
+
 int pcie_init_notification(struct controller *ctrl)
 {
 	if (pciehp_request_irq(ctrl))