usb: musb: Prepare dsps glue layer for PM runtime support

We want to be polling the state when nothing is connected.
Let's change the polling logic in preparation for PM runtime
support.
Signed-off-by: Tony Lindgren <tony@atomide.com>
[b-liu@ti.com: undo unnecessary line leading whitespace change]
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/usb/musb/musb_dsps.c

@@ -247,6 +247,10 @@ static void otg_timer(unsigned long _musb)
 
 	spin_lock_irqsave(&musb->lock, flags);
 	switch (musb->xceiv->otg->state) {
+	case OTG_STATE_A_WAIT_VRISE:
+		mod_timer(&glue->timer, jiffies +
+				msecs_to_jiffies(wrp->poll_timeout));
+		break;
 	case OTG_STATE_A_WAIT_BCON:
 		musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
 		skip_session = 1;
@@ -338,7 +342,8 @@ static irqreturn_t dsps_interrupt(int irq, void *hci)
 			MUSB_HST_MODE(musb);
 			musb->xceiv->otg->default_a = 1;
 			musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
-			del_timer(&glue->timer);
+			mod_timer(&glue->timer, jiffies +
+				  msecs_to_jiffies(wrp->poll_timeout));
 		} else {
 			musb->is_active = 0;
 			MUSB_DEV_MODE(musb);
@@ -358,11 +363,17 @@ static irqreturn_t dsps_interrupt(int irq, void *hci)
 	if (musb->int_tx || musb->int_rx || musb->int_usb)
 		ret |= musb_interrupt(musb);
 
-	/* Poll for ID change in OTG port mode */
-	if (musb->xceiv->otg->state == OTG_STATE_B_IDLE &&
-			musb->port_mode == MUSB_PORT_MODE_DUAL_ROLE)
+	/* Poll for ID change and connect */
+	switch (musb->xceiv->otg->state) {
+	case OTG_STATE_B_IDLE:
+	case OTG_STATE_A_WAIT_BCON:
 		mod_timer(&glue->timer, jiffies +
 				msecs_to_jiffies(wrp->poll_timeout));
+		break;
+	default:
+		break;
+	}
+
 out:
 	spin_unlock_irqrestore(&musb->lock, flags);
 
@@ -461,6 +472,9 @@ static int dsps_musb_init(struct musb *musb)
 		musb_writeb(musb->mregs, MUSB_BABBLE_CTL, val);
 	}
 
+	mod_timer(&glue->timer, jiffies +
+		  msecs_to_jiffies(glue->wrp->poll_timeout));
+
 	return dsps_musb_dbg_init(musb, glue);
 }