Commit 2f42a776 authored by Mark Brown's avatar Mark Brown

Merge remote-tracking branches 'asoc/topic/adsp', 'asoc/topic/ak4613',...

Merge remote-tracking branches 'asoc/topic/adsp', 'asoc/topic/ak4613', 'asoc/topic/au1761' and 'asoc/topic/blackfin' into asoc-next
......@@ -119,7 +119,7 @@ static int bfin_eval_adau1373_codec_init(struct snd_soc_pcm_runtime *rtd)
return ret;
}
static struct snd_soc_ops bfin_eval_adau1373_ops = {
static const struct snd_soc_ops bfin_eval_adau1373_ops = {
.hw_params = bfin_eval_adau1373_hw_params,
};
......
......@@ -64,7 +64,7 @@ static int bfin_eval_adav80x_codec_init(struct snd_soc_pcm_runtime *rtd)
return 0;
}
static struct snd_soc_ops bfin_eval_adav80x_ops = {
static const struct snd_soc_ops bfin_eval_adav80x_ops = {
.hw_params = bfin_eval_adav80x_hw_params,
};
......
......@@ -303,12 +303,14 @@ config SND_SOC_ADAU1761
select SND_SOC_ADAU17X1
config SND_SOC_ADAU1761_I2C
tristate
tristate "Analog Devices AU1761 CODEC - I2C"
depends on I2C
select SND_SOC_ADAU1761
select REGMAP_I2C
config SND_SOC_ADAU1761_SPI
tristate
tristate "Analog Devices AU1761 CODEC - SPI"
depends on SPI
select SND_SOC_ADAU1761
select REGMAP_SPI
......
......@@ -75,6 +75,12 @@
#define DFS_DOUBLE_SPEED (1 << 2)
#define DFS_QUAD_SPEED (2 << 2)
/* ICTRL */
#define ICTRL_MASK (0x3)
/* OCTRL */
#define OCTRL_MASK (0x3F)
struct ak4613_formats {
unsigned int width;
unsigned int fmt;
......@@ -365,8 +371,8 @@ static int ak4613_dai_hw_params(struct snd_pcm_substream *substream,
snd_soc_update_bits(codec, CTRL1, FMT_MASK, fmt_ctrl);
snd_soc_update_bits(codec, CTRL2, DFS_MASK, ctrl2);
snd_soc_write(codec, ICTRL, priv->ic);
snd_soc_write(codec, OCTRL, priv->oc);
snd_soc_update_bits(codec, ICTRL, ICTRL_MASK, priv->ic);
snd_soc_update_bits(codec, OCTRL, OCTRL_MASK, priv->oc);
hw_params_end:
if (ret < 0)
......
......@@ -112,17 +112,22 @@
#define ADSP1_CLK_SEL_SHIFT 0 /* CLK_SEL_ENA */
#define ADSP1_CLK_SEL_WIDTH 3 /* CLK_SEL_ENA */
#define ADSP2_CONTROL 0x0
#define ADSP2_CLOCKING 0x1
#define ADSP2_STATUS1 0x4
#define ADSP2_WDMA_CONFIG_1 0x30
#define ADSP2_WDMA_CONFIG_2 0x31
#define ADSP2_RDMA_CONFIG_1 0x34
#define ADSP2_SCRATCH0 0x40
#define ADSP2_SCRATCH1 0x41
#define ADSP2_SCRATCH2 0x42
#define ADSP2_SCRATCH3 0x43
#define ADSP2_CONTROL 0x0
#define ADSP2_CLOCKING 0x1
#define ADSP2V2_CLOCKING 0x2
#define ADSP2_STATUS1 0x4
#define ADSP2_WDMA_CONFIG_1 0x30
#define ADSP2_WDMA_CONFIG_2 0x31
#define ADSP2V2_WDMA_CONFIG_2 0x32
#define ADSP2_RDMA_CONFIG_1 0x34
#define ADSP2_SCRATCH0 0x40
#define ADSP2_SCRATCH1 0x41
#define ADSP2_SCRATCH2 0x42
#define ADSP2_SCRATCH3 0x43
#define ADSP2V2_SCRATCH0_1 0x40
#define ADSP2V2_SCRATCH2_3 0x42
/*
* ADSP2 Control
......@@ -152,6 +157,17 @@
#define ADSP2_CLK_SEL_SHIFT 0 /* CLK_SEL_ENA */
#define ADSP2_CLK_SEL_WIDTH 3 /* CLK_SEL_ENA */
/*
* ADSP2V2 clocking
*/
#define ADSP2V2_CLK_SEL_MASK 0x70000 /* CLK_SEL_ENA */
#define ADSP2V2_CLK_SEL_SHIFT 16 /* CLK_SEL_ENA */
#define ADSP2V2_CLK_SEL_WIDTH 3 /* CLK_SEL_ENA */
#define ADSP2V2_RATE_MASK 0x7800 /* DSP_RATE */
#define ADSP2V2_RATE_SHIFT 11 /* DSP_RATE */
#define ADSP2V2_RATE_WIDTH 4 /* DSP_RATE */
/*
* ADSP2 Status 1
*/
......@@ -160,6 +176,37 @@
#define ADSP2_RAM_RDY_SHIFT 0
#define ADSP2_RAM_RDY_WIDTH 1
/*
* ADSP2 Lock support
*/
#define ADSP2_LOCK_CODE_0 0x5555
#define ADSP2_LOCK_CODE_1 0xAAAA
#define ADSP2_WATCHDOG 0x0A
#define ADSP2_BUS_ERR_ADDR 0x52
#define ADSP2_REGION_LOCK_STATUS 0x64
#define ADSP2_LOCK_REGION_1_LOCK_REGION_0 0x66
#define ADSP2_LOCK_REGION_3_LOCK_REGION_2 0x68
#define ADSP2_LOCK_REGION_5_LOCK_REGION_4 0x6A
#define ADSP2_LOCK_REGION_7_LOCK_REGION_6 0x6C
#define ADSP2_LOCK_REGION_9_LOCK_REGION_8 0x6E
#define ADSP2_LOCK_REGION_CTRL 0x7A
#define ADSP2_PMEM_ERR_ADDR_XMEM_ERR_ADDR 0x7C
#define ADSP2_REGION_LOCK_ERR_MASK 0x8000
#define ADSP2_SLAVE_ERR_MASK 0x4000
#define ADSP2_WDT_TIMEOUT_STS_MASK 0x2000
#define ADSP2_CTRL_ERR_PAUSE_ENA 0x0002
#define ADSP2_CTRL_ERR_EINT 0x0001
#define ADSP2_BUS_ERR_ADDR_MASK 0x00FFFFFF
#define ADSP2_XMEM_ERR_ADDR_MASK 0x0000FFFF
#define ADSP2_PMEM_ERR_ADDR_MASK 0x7FFF0000
#define ADSP2_PMEM_ERR_ADDR_SHIFT 16
#define ADSP2_WDT_ENA_MASK 0xFFFFFFFD
#define ADSP2_LOCK_REGION_SHIFT 16
#define ADSP_MAX_STD_CTRL_SIZE 512
#define WM_ADSP_ACKED_CTL_TIMEOUT_MS 100
......@@ -683,6 +730,9 @@ static const struct soc_enum wm_adsp_fw_enum[] = {
SOC_ENUM_SINGLE(0, 1, ARRAY_SIZE(wm_adsp_fw_text), wm_adsp_fw_text),
SOC_ENUM_SINGLE(0, 2, ARRAY_SIZE(wm_adsp_fw_text), wm_adsp_fw_text),
SOC_ENUM_SINGLE(0, 3, ARRAY_SIZE(wm_adsp_fw_text), wm_adsp_fw_text),
SOC_ENUM_SINGLE(0, 4, ARRAY_SIZE(wm_adsp_fw_text), wm_adsp_fw_text),
SOC_ENUM_SINGLE(0, 5, ARRAY_SIZE(wm_adsp_fw_text), wm_adsp_fw_text),
SOC_ENUM_SINGLE(0, 6, ARRAY_SIZE(wm_adsp_fw_text), wm_adsp_fw_text),
};
const struct snd_kcontrol_new wm_adsp_fw_controls[] = {
......@@ -694,6 +744,12 @@ const struct snd_kcontrol_new wm_adsp_fw_controls[] = {
wm_adsp_fw_get, wm_adsp_fw_put),
SOC_ENUM_EXT("DSP4 Firmware", wm_adsp_fw_enum[3],
wm_adsp_fw_get, wm_adsp_fw_put),
SOC_ENUM_EXT("DSP5 Firmware", wm_adsp_fw_enum[4],
wm_adsp_fw_get, wm_adsp_fw_put),
SOC_ENUM_EXT("DSP6 Firmware", wm_adsp_fw_enum[5],
wm_adsp_fw_get, wm_adsp_fw_put),
SOC_ENUM_EXT("DSP7 Firmware", wm_adsp_fw_enum[6],
wm_adsp_fw_get, wm_adsp_fw_put),
};
EXPORT_SYMBOL_GPL(wm_adsp_fw_controls);
......@@ -750,6 +806,29 @@ static void wm_adsp2_show_fw_status(struct wm_adsp *dsp)
be16_to_cpu(scratch[3]));
}
static void wm_adsp2v2_show_fw_status(struct wm_adsp *dsp)
{
u32 scratch[2];
int ret;
ret = regmap_raw_read(dsp->regmap, dsp->base + ADSP2V2_SCRATCH0_1,
scratch, sizeof(scratch));
if (ret) {
adsp_err(dsp, "Failed to read SCRATCH regs: %d\n", ret);
return;
}
scratch[0] = be32_to_cpu(scratch[0]);
scratch[1] = be32_to_cpu(scratch[1]);
adsp_dbg(dsp, "FW SCRATCH 0:0x%x 1:0x%x 2:0x%x 3:0x%x\n",
scratch[0] & 0xFFFF,
scratch[0] >> 16,
scratch[1] & 0xFFFF,
scratch[1] >> 16);
}
static inline struct wm_coeff_ctl *bytes_ext_to_ctl(struct soc_bytes_ext *ext)
{
return container_of(ext, struct wm_coeff_ctl, bytes_ext);
......@@ -2435,10 +2514,17 @@ static int wm_adsp2_ena(struct wm_adsp *dsp)
unsigned int val;
int ret, count;
ret = regmap_update_bits_async(dsp->regmap, dsp->base + ADSP2_CONTROL,
ADSP2_SYS_ENA, ADSP2_SYS_ENA);
if (ret != 0)
return ret;
switch (dsp->rev) {
case 0:
ret = regmap_update_bits_async(dsp->regmap,
dsp->base + ADSP2_CONTROL,
ADSP2_SYS_ENA, ADSP2_SYS_ENA);
if (ret != 0)
return ret;
break;
default:
break;
}
/* Wait for the RAM to start, should be near instantaneous */
for (count = 0; count < 10; ++count) {
......@@ -2497,11 +2583,17 @@ static void wm_adsp2_boot_work(struct work_struct *work)
if (ret != 0)
goto err_ena;
/* Turn DSP back off until we are ready to run */
ret = regmap_update_bits(dsp->regmap, dsp->base + ADSP2_CONTROL,
ADSP2_SYS_ENA, 0);
if (ret != 0)
goto err_ena;
switch (dsp->rev) {
case 0:
/* Turn DSP back off until we are ready to run */
ret = regmap_update_bits(dsp->regmap, dsp->base + ADSP2_CONTROL,
ADSP2_SYS_ENA, 0);
if (ret != 0)
goto err_ena;
break;
default:
break;
}
dsp->booted = true;
......@@ -2523,12 +2615,21 @@ static void wm_adsp2_set_dspclk(struct wm_adsp *dsp, unsigned int freq)
{
int ret;
ret = regmap_update_bits_async(dsp->regmap,
dsp->base + ADSP2_CLOCKING,
ADSP2_CLK_SEL_MASK,
freq << ADSP2_CLK_SEL_SHIFT);
if (ret != 0)
adsp_err(dsp, "Failed to set clock rate: %d\n", ret);
switch (dsp->rev) {
case 0:
ret = regmap_update_bits_async(dsp->regmap,
dsp->base + ADSP2_CLOCKING,
ADSP2_CLK_SEL_MASK,
freq << ADSP2_CLK_SEL_SHIFT);
if (ret) {
adsp_err(dsp, "Failed to set clock rate: %d\n", ret);
return;
}
break;
default:
/* clock is handled by parent codec driver */
break;
}
}
int wm_adsp2_preloader_get(struct snd_kcontrol *kcontrol,
......@@ -2568,6 +2669,18 @@ int wm_adsp2_preloader_put(struct snd_kcontrol *kcontrol,
}
EXPORT_SYMBOL_GPL(wm_adsp2_preloader_put);
static void wm_adsp_stop_watchdog(struct wm_adsp *dsp)
{
switch (dsp->rev) {
case 0:
case 1:
return;
default:
regmap_update_bits(dsp->regmap, dsp->base + ADSP2_WATCHDOG,
ADSP2_WDT_ENA_MASK, 0);
}
}
int wm_adsp2_early_event(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *kcontrol, int event,
unsigned int freq)
......@@ -2640,6 +2753,8 @@ int wm_adsp2_event(struct snd_soc_dapm_widget *w,
if (ret != 0)
goto err;
wm_adsp2_lock(dsp, dsp->lock_regions);
ret = regmap_update_bits(dsp->regmap,
dsp->base + ADSP2_CONTROL,
ADSP2_CORE_ENA | ADSP2_START,
......@@ -2663,23 +2778,49 @@ int wm_adsp2_event(struct snd_soc_dapm_widget *w,
/* Tell the firmware to cleanup */
wm_adsp_signal_event_controls(dsp, WM_ADSP_FW_EVENT_SHUTDOWN);
wm_adsp_stop_watchdog(dsp);
/* Log firmware state, it can be useful for analysis */
wm_adsp2_show_fw_status(dsp);
switch (dsp->rev) {
case 0:
wm_adsp2_show_fw_status(dsp);
break;
default:
wm_adsp2v2_show_fw_status(dsp);
break;
}
mutex_lock(&dsp->pwr_lock);
dsp->running = false;
regmap_update_bits(dsp->regmap, dsp->base + ADSP2_CONTROL,
regmap_update_bits(dsp->regmap,
dsp->base + ADSP2_CONTROL,
ADSP2_CORE_ENA | ADSP2_START, 0);
/* Make sure DMAs are quiesced */
regmap_write(dsp->regmap, dsp->base + ADSP2_RDMA_CONFIG_1, 0);
regmap_write(dsp->regmap, dsp->base + ADSP2_WDMA_CONFIG_1, 0);
regmap_write(dsp->regmap, dsp->base + ADSP2_WDMA_CONFIG_2, 0);
regmap_update_bits(dsp->regmap, dsp->base + ADSP2_CONTROL,
ADSP2_SYS_ENA, 0);
switch (dsp->rev) {
case 0:
regmap_write(dsp->regmap,
dsp->base + ADSP2_RDMA_CONFIG_1, 0);
regmap_write(dsp->regmap,
dsp->base + ADSP2_WDMA_CONFIG_1, 0);
regmap_write(dsp->regmap,
dsp->base + ADSP2_WDMA_CONFIG_2, 0);
regmap_update_bits(dsp->regmap,
dsp->base + ADSP2_CONTROL,
ADSP2_SYS_ENA, 0);
break;
default:
regmap_write(dsp->regmap,
dsp->base + ADSP2_RDMA_CONFIG_1, 0);
regmap_write(dsp->regmap,
dsp->base + ADSP2_WDMA_CONFIG_1, 0);
regmap_write(dsp->regmap,
dsp->base + ADSP2V2_WDMA_CONFIG_2, 0);
break;
}
if (wm_adsp_fw[dsp->fw].num_caps != 0)
wm_adsp_buffer_free(dsp);
......@@ -2732,15 +2873,22 @@ int wm_adsp2_init(struct wm_adsp *dsp)
{
int ret;
/*
* Disable the DSP memory by default when in reset for a small
* power saving.
*/
ret = regmap_update_bits(dsp->regmap, dsp->base + ADSP2_CONTROL,
ADSP2_MEM_ENA, 0);
if (ret != 0) {
adsp_err(dsp, "Failed to clear memory retention: %d\n", ret);
return ret;
switch (dsp->rev) {
case 0:
/*
* Disable the DSP memory by default when in reset for a small
* power saving.
*/
ret = regmap_update_bits(dsp->regmap, dsp->base + ADSP2_CONTROL,
ADSP2_MEM_ENA, 0);
if (ret) {
adsp_err(dsp,
"Failed to clear memory retention: %d\n", ret);
return ret;
}
break;
default:
break;
}
INIT_LIST_HEAD(&dsp->alg_regions);
......@@ -3523,4 +3671,94 @@ int wm_adsp_compr_copy(struct snd_compr_stream *stream, char __user *buf,
}
EXPORT_SYMBOL_GPL(wm_adsp_compr_copy);
int wm_adsp2_lock(struct wm_adsp *dsp, unsigned int lock_regions)
{
struct regmap *regmap = dsp->regmap;
unsigned int code0, code1, lock_reg;
if (!(lock_regions & WM_ADSP2_REGION_ALL))
return 0;
lock_regions &= WM_ADSP2_REGION_ALL;
lock_reg = dsp->base + ADSP2_LOCK_REGION_1_LOCK_REGION_0;
while (lock_regions) {
code0 = code1 = 0;
if (lock_regions & BIT(0)) {
code0 = ADSP2_LOCK_CODE_0;
code1 = ADSP2_LOCK_CODE_1;
}
if (lock_regions & BIT(1)) {
code0 |= ADSP2_LOCK_CODE_0 << ADSP2_LOCK_REGION_SHIFT;
code1 |= ADSP2_LOCK_CODE_1 << ADSP2_LOCK_REGION_SHIFT;
}
regmap_write(regmap, lock_reg, code0);
regmap_write(regmap, lock_reg, code1);
lock_regions >>= 2;
lock_reg += 2;
}
return 0;
}
EXPORT_SYMBOL_GPL(wm_adsp2_lock);
irqreturn_t wm_adsp2_bus_error(struct wm_adsp *dsp)
{
unsigned int val;
struct regmap *regmap = dsp->regmap;
int ret = 0;
ret = regmap_read(regmap, dsp->base + ADSP2_LOCK_REGION_CTRL, &val);
if (ret) {
adsp_err(dsp,
"Failed to read Region Lock Ctrl register: %d\n", ret);
return IRQ_HANDLED;
}
if (val & ADSP2_WDT_TIMEOUT_STS_MASK) {
adsp_err(dsp, "watchdog timeout error\n");
wm_adsp_stop_watchdog(dsp);
}
if (val & (ADSP2_SLAVE_ERR_MASK | ADSP2_REGION_LOCK_ERR_MASK)) {
if (val & ADSP2_SLAVE_ERR_MASK)
adsp_err(dsp, "bus error: slave error\n");
else
adsp_err(dsp, "bus error: region lock error\n");
ret = regmap_read(regmap, dsp->base + ADSP2_BUS_ERR_ADDR, &val);
if (ret) {
adsp_err(dsp,
"Failed to read Bus Err Addr register: %d\n",
ret);
return IRQ_HANDLED;
}
adsp_err(dsp, "bus error address = 0x%x\n",
val & ADSP2_BUS_ERR_ADDR_MASK);
ret = regmap_read(regmap,
dsp->base + ADSP2_PMEM_ERR_ADDR_XMEM_ERR_ADDR,
&val);
if (ret) {
adsp_err(dsp,
"Failed to read Pmem Xmem Err Addr register: %d\n",
ret);
return IRQ_HANDLED;
}
adsp_err(dsp, "xmem error address = 0x%x\n",
val & ADSP2_XMEM_ERR_ADDR_MASK);
adsp_err(dsp, "pmem error address = 0x%x\n",
(val & ADSP2_PMEM_ERR_ADDR_MASK) >>
ADSP2_PMEM_ERR_ADDR_SHIFT);
}
regmap_update_bits(regmap, dsp->base + ADSP2_LOCK_REGION_CTRL,
ADSP2_CTRL_ERR_EINT, ADSP2_CTRL_ERR_EINT);
return IRQ_HANDLED;
}
EXPORT_SYMBOL_GPL(wm_adsp2_bus_error);
MODULE_LICENSE("GPL v2");
......@@ -23,6 +23,23 @@
#define WM_ADSP_COMPR_OK 0
#define WM_ADSP_COMPR_VOICE_TRIGGER 1
#define WM_ADSP2_REGION_0 BIT(0)
#define WM_ADSP2_REGION_1 BIT(1)
#define WM_ADSP2_REGION_2 BIT(2)
#define WM_ADSP2_REGION_3 BIT(3)
#define WM_ADSP2_REGION_4 BIT(4)
#define WM_ADSP2_REGION_5 BIT(5)
#define WM_ADSP2_REGION_6 BIT(6)
#define WM_ADSP2_REGION_7 BIT(7)
#define WM_ADSP2_REGION_8 BIT(8)
#define WM_ADSP2_REGION_9 BIT(9)
#define WM_ADSP2_REGION_1_9 (WM_ADSP2_REGION_1 | \
WM_ADSP2_REGION_2 | WM_ADSP2_REGION_3 | \
WM_ADSP2_REGION_4 | WM_ADSP2_REGION_5 | \
WM_ADSP2_REGION_6 | WM_ADSP2_REGION_7 | \
WM_ADSP2_REGION_8 | WM_ADSP2_REGION_9)
#define WM_ADSP2_REGION_ALL (WM_ADSP2_REGION_0 | WM_ADSP2_REGION_1_9)
struct wm_adsp_region {
int type;
unsigned int base;
......@@ -40,6 +57,7 @@ struct wm_adsp_compr_buf;
struct wm_adsp {
const char *part;
int rev;
int num;
int type;
struct device *dev;
......@@ -75,6 +93,8 @@ struct wm_adsp {
struct mutex pwr_lock;
unsigned int lock_regions;
#ifdef CONFIG_DEBUG_FS
struct dentry *debugfs_root;
char *wmfw_file_name;
......@@ -113,6 +133,10 @@ int wm_adsp1_event(struct snd_soc_dapm_widget *w,
int wm_adsp2_early_event(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *kcontrol, int event,
unsigned int freq);
int wm_adsp2_lock(struct wm_adsp *adsp, unsigned int regions);
irqreturn_t wm_adsp2_bus_error(struct wm_adsp *adsp);
int wm_adsp2_event(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *kcontrol, int event);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment