clkdev: remove CONFIG_CLKDEV_LOOKUP

This option is now synonymous with CONFIG_HAVE_CLK, so use
the latter globally. Any out-of-tree platform ports that
still use a private clk_get()/clk_put() implementation should
move to CONFIG_COMMON_CLK.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

arch/arm/Kconfig

@@ -353,7 +353,6 @@ config ARCH_EP93XX
 	select ARM_VIC
 	select GENERIC_IRQ_MULTI_HANDLER
 	select AUTO_ZRELADDR
-	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
 	select CPU_ARM920T
 	select GPIOLIB
@@ -504,7 +503,6 @@ config ARCH_OMAP1
 	bool "TI OMAP1"
 	depends on MMU
 	select ARCH_OMAP
-	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
 	select GENERIC_IRQ_CHIP
 	select GENERIC_IRQ_MULTI_HANDLER

arch/m68k/Kconfig.cpu

@@ -29,7 +29,6 @@ config COLDFIRE
 	select CPU_HAS_NO_MULDIV64
 	select GENERIC_CSUM
 	select GPIOLIB
-	select CLKDEV_LOOKUP
 	select HAVE_LEGACY_CLK
 
 endchoice

arch/mips/Kconfig

@@ -332,7 +332,6 @@ config BCM63XX
 	select SWAP_IO_SPACE
 	select GPIOLIB
 	select MIPS_L1_CACHE_SHIFT_4
-	select CLKDEV_LOOKUP
 	select HAVE_LEGACY_CLK
 	help
 	  Support for BCM63XX based boards
@@ -446,7 +445,6 @@ config LANTIQ
 	select GPIOLIB
 	select SWAP_IO_SPACE
 	select BOOT_RAW
-	select CLKDEV_LOOKUP
 	select HAVE_LEGACY_CLK
 	select USE_OF
 	select PINCTRL
@@ -643,7 +641,6 @@ config RALINK
 	select SYS_SUPPORTS_MIPS16
 	select SYS_SUPPORTS_ZBOOT
 	select SYS_HAS_EARLY_PRINTK
-	select CLKDEV_LOOKUP
 	select ARCH_HAS_RESET_CONTROLLER
 	select RESET_CONTROLLER
 

arch/mips/pic32/Kconfig

@@ -17,7 +17,6 @@ config PIC32MZDA
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select GPIOLIB
 	select COMMON_CLK
-	select CLKDEV_LOOKUP
 	select LIBFDT
 	select USE_OF
 	select PINCTRL

arch/sh/Kconfig

@@ -14,7 +14,6 @@ config SUPERH
 	select ARCH_HIBERNATION_POSSIBLE if MMU
 	select ARCH_MIGHT_HAVE_PC_PARPORT
 	select ARCH_WANT_IPC_PARSE_VERSION
-	select CLKDEV_LOOKUP
 	select CPU_NO_EFFICIENT_FFS
 	select DMA_DECLARE_COHERENT
 	select GENERIC_ATOMIC64

drivers/clk/Kconfig

@@ -6,10 +6,6 @@ config HAVE_CLK
 	  The <linux/clk.h> calls support software clock gating and
 	  thus are a key power management tool on many systems.
 
-config CLKDEV_LOOKUP
-	bool
-	select HAVE_CLK
-
 config HAVE_CLK_PREPARE
 	bool
 
@@ -26,7 +22,7 @@ menuconfig COMMON_CLK
 	bool "Common Clock Framework"
 	depends on !HAVE_LEGACY_CLK
 	select HAVE_CLK_PREPARE
-	select CLKDEV_LOOKUP
+	select HAVE_CLK
 	select SRCU
 	select RATIONAL
 	help

drivers/clk/Makefile

 # SPDX-License-Identifier: GPL-2.0
 # common clock types
-obj-$(CONFIG_HAVE_CLK)		+= clk-devres.o clk-bulk.o
-obj-$(CONFIG_CLKDEV_LOOKUP)	+= clkdev.o
+obj-$(CONFIG_HAVE_CLK)		+= clk-devres.o clk-bulk.o clkdev.o
 obj-$(CONFIG_COMMON_CLK)	+= clk.o
 obj-$(CONFIG_COMMON_CLK)	+= clk-divider.o
 obj-$(CONFIG_COMMON_CLK)	+= clk-fixed-factor.o

drivers/clocksource/Kconfig

@@ -360,7 +360,7 @@ config ARM_GLOBAL_TIMER
 
 config ARM_TIMER_SP804
 	bool "Support for Dual Timer SP804 module" if COMPILE_TEST
-	depends on GENERIC_SCHED_CLOCK && CLKDEV_LOOKUP
+	depends on GENERIC_SCHED_CLOCK && HAVE_CLK
 	select CLKSRC_MMIO
 	select TIMER_OF if OF
 
@@ -570,12 +570,12 @@ config H8300_TPU
 
 config CLKSRC_IMX_GPT
 	bool "Clocksource using i.MX GPT" if COMPILE_TEST
-	depends on (ARM || ARM64) && CLKDEV_LOOKUP
+	depends on (ARM || ARM64) && HAVE_CLK
 	select CLKSRC_MMIO
 
 config CLKSRC_IMX_TPM
 	bool "Clocksource using i.MX TPM" if COMPILE_TEST
-	depends on (ARM || ARM64) && CLKDEV_LOOKUP
+	depends on (ARM || ARM64) && HAVE_CLK
 	select CLKSRC_MMIO
 	select TIMER_OF
 	help

drivers/mmc/host/Kconfig

@@ -329,7 +329,7 @@ config MMC_SDHCI_S3C
 
 config MMC_SDHCI_PXAV3
 	tristate "Marvell MMP2 SD Host Controller support (PXAV3)"
-	depends on CLKDEV_LOOKUP
+	depends on HAVE_CLK
 	depends on MMC_SDHCI_PLTFM
 	depends on ARCH_BERLIN || ARCH_MMP || ARCH_MVEBU || COMPILE_TEST
 	default CPU_MMP2
@@ -342,7 +342,7 @@ config MMC_SDHCI_PXAV3
 
 config MMC_SDHCI_PXAV2
 	tristate "Marvell PXA9XX SD Host Controller support (PXAV2)"
-	depends on CLKDEV_LOOKUP
+	depends on HAVE_CLK
 	depends on MMC_SDHCI_PLTFM
 	depends on ARCH_MMP || COMPILE_TEST
 	default CPU_PXA910

drivers/staging/board/Kconfig

 # SPDX-License-Identifier: GPL-2.0
 config STAGING_BOARD
 	bool "Staging Board Support"
-	depends on OF_ADDRESS && OF_IRQ && CLKDEV_LOOKUP
+	depends on OF_ADDRESS && OF_IRQ && HAVE_CLK
 	help
 	  Staging board base is to support continuous upstream
 	  in-tree development and integration of platform devices.

sound/soc/dwc/Kconfig

 # SPDX-License-Identifier: GPL-2.0-only
 config SND_DESIGNWARE_I2S
 	tristate "Synopsys I2S Device Driver"
-	depends on CLKDEV_LOOKUP
+	depends on HAVE_CLK
 	select SND_SOC_GENERIC_DMAENGINE_PCM
 	help
 	 Say Y or M if you want to add support for I2S driver for

sound/soc/rockchip/Kconfig

@@ -9,7 +9,7 @@ config SND_SOC_ROCKCHIP
 
 config SND_SOC_ROCKCHIP_I2S
 	tristate "Rockchip I2S Device Driver"
-	depends on CLKDEV_LOOKUP && SND_SOC_ROCKCHIP
+	depends on HAVE_CLK && SND_SOC_ROCKCHIP
 	select SND_SOC_GENERIC_DMAENGINE_PCM
 	help
 	  Say Y or M if you want to add support for I2S driver for
@@ -18,7 +18,7 @@ config SND_SOC_ROCKCHIP_I2S
 
 config SND_SOC_ROCKCHIP_PDM
 	tristate "Rockchip PDM Controller Driver"
-	depends on CLKDEV_LOOKUP && SND_SOC_ROCKCHIP
+	depends on HAVE_CLK && SND_SOC_ROCKCHIP
 	select SND_SOC_GENERIC_DMAENGINE_PCM
 	select RATIONAL
 	help
@@ -28,7 +28,7 @@ config SND_SOC_ROCKCHIP_PDM
 
 config SND_SOC_ROCKCHIP_SPDIF
 	tristate "Rockchip SPDIF Device Driver"
-	depends on CLKDEV_LOOKUP && SND_SOC_ROCKCHIP
+	depends on HAVE_CLK && SND_SOC_ROCKCHIP
 	select SND_SOC_GENERIC_DMAENGINE_PCM
 	help
 	  Say Y or M if you want to add support for SPDIF driver for
@@ -36,7 +36,7 @@ config SND_SOC_ROCKCHIP_SPDIF
 
 config SND_SOC_ROCKCHIP_MAX98090
 	tristate "ASoC support for Rockchip boards using a MAX98090 codec"
-	depends on SND_SOC_ROCKCHIP && I2C && GPIOLIB && CLKDEV_LOOKUP
+	depends on SND_SOC_ROCKCHIP && I2C && GPIOLIB && HAVE_CLK
 	select SND_SOC_ROCKCHIP_I2S
 	select SND_SOC_MAX98090
 	select SND_SOC_TS3A227E
@@ -47,7 +47,7 @@ config SND_SOC_ROCKCHIP_MAX98090
 
 config SND_SOC_ROCKCHIP_RT5645
 	tristate "ASoC support for Rockchip boards using a RT5645/RT5650 codec"
-	depends on SND_SOC_ROCKCHIP && I2C && GPIOLIB && CLKDEV_LOOKUP
+	depends on SND_SOC_ROCKCHIP && I2C && GPIOLIB && HAVE_CLK
 	select SND_SOC_ROCKCHIP_I2S
 	select SND_SOC_RT5645
 	help
@@ -56,7 +56,7 @@ config SND_SOC_ROCKCHIP_RT5645
 
 config SND_SOC_RK3288_HDMI_ANALOG
 	tristate "ASoC support multiple codecs for Rockchip RK3288 boards"
-	depends on SND_SOC_ROCKCHIP && I2C && GPIOLIB && CLKDEV_LOOKUP
+	depends on SND_SOC_ROCKCHIP && I2C && GPIOLIB && HAVE_CLK
 	select SND_SOC_ROCKCHIP_I2S
 	select SND_SOC_HDMI_CODEC
 	select SND_SOC_ES8328_I2C
@@ -68,7 +68,7 @@ config SND_SOC_RK3288_HDMI_ANALOG
 
 config SND_SOC_RK3399_GRU_SOUND
 	tristate "ASoC support multiple codecs for Rockchip RK3399 GRU boards"
-	depends on SND_SOC_ROCKCHIP && I2C && GPIOLIB && CLKDEV_LOOKUP && SPI
+	depends on SND_SOC_ROCKCHIP && I2C && GPIOLIB && HAVE_CLK && SPI
 	select SND_SOC_ROCKCHIP_I2S
 	select SND_SOC_MAX98357A
 	select SND_SOC_RT5514