Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull 2nd round of input updates from Dmitry Torokhov:
 - update to Wacom driver to support wireless devices
 - update to Sentelci touchpad driver to support newer hardware
 - update to gpio-keys driver to support "interrupt-only" keys
 - fixups to earlier commits

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: wacom - check for allocation failure in probe()
  Input: tegra-kbc - allocate pdata before using it
  Input: amijoy - add missing platform check
  Input: wacom - wireless battery status
  Input: wacom - create inputs when wireless connect
  Input: wacom - wireless monitor framework
  Input: wacom - isolate input registration
  Input: sentelic - improve packet debugging information
  Input: sentelic - minor code cleanup
  Input: sentelic - enabling absolute coordinates output for newer hardware
  Input: sentelic - refactor code for upcoming new hardware support
  Input: gpio_keys - add support for interrupt only keys
  Input: gpio_keys - consolidate key destructor code
  Input: revert "gpio_keys - switch to using threaded IRQs"
  Input: gpio_keys - constify platform data
  Input: spear-keyboard - remove kbd_set_plat_data()

arch/arm/plat-spear/include/plat/keyboard.h

@@ -159,11 +159,4 @@ struct kbd_platform_data {
 	unsigned int mode;
 };
 
-/* This function is used to set platform data field of pdev->dev */
-static inline void
-kbd_set_plat_data(struct platform_device *pdev, struct kbd_platform_data *data)
-{
-	pdev->dev.platform_data = data;
-}
-
 #endif /* __PLAT_KEYBOARD_H */

drivers/input/joystick/amijoy.c

@@ -107,6 +107,9 @@ static int __init amijoy_init(void)
 	int i, j;
 	int err;
 
+	if (!MACH_IS_AMIGA)
+		return -ENODEV;
+
 	for (i = 0; i < 2; i++) {
 		if (!amijoy[i])
 			continue;

drivers/input/keyboard/gpio_keys.c

@@ -28,14 +28,18 @@
 #include <linux/gpio.h>
 #include <linux/of_platform.h>
 #include <linux/of_gpio.h>
+#include <linux/spinlock.h>
 
 struct gpio_button_data {
-	struct gpio_keys_button *button;
+	const struct gpio_keys_button *button;
 	struct input_dev *input;
 	struct timer_list timer;
 	struct work_struct work;
-	int timer_debounce;	/* in msecs */
+	unsigned int timer_debounce;	/* in msecs */
+	unsigned int irq;
+	spinlock_t lock;
 	bool disabled;
+	bool key_pressed;
 };
 
 struct gpio_keys_drvdata {
@@ -114,7 +118,7 @@ static void gpio_keys_disable_button(struct gpio_button_data *bdata)
 		/*
 		 * Disable IRQ and possible debouncing timer.
 		 */
-		disable_irq(gpio_to_irq(bdata->button->gpio));
+		disable_irq(bdata->irq);
 		if (bdata->timer_debounce)
 			del_timer_sync(&bdata->timer);
 
@@ -135,7 +139,7 @@ static void gpio_keys_disable_button(struct gpio_button_data *bdata)
 static void gpio_keys_enable_button(struct gpio_button_data *bdata)
 {
 	if (bdata->disabled) {
-		enable_irq(gpio_to_irq(bdata->button->gpio));
+		enable_irq(bdata->irq);
 		bdata->disabled = false;
 	}
 }
@@ -195,7 +199,7 @@ static ssize_t gpio_keys_attr_show_helper(struct gpio_keys_drvdata *ddata,
  * @type: button type (%EV_KEY, %EV_SW)
  *
  * This function parses stringified bitmap from @buf and disables/enables
- * GPIO buttons accordinly. Returns 0 on success and negative error
+ * GPIO buttons accordingly. Returns 0 on success and negative error
  * on failure.
  */
 static ssize_t gpio_keys_attr_store_helper(struct gpio_keys_drvdata *ddata,
@@ -320,9 +324,9 @@ static struct attribute_group gpio_keys_attr_group = {
 	.attrs = gpio_keys_attrs,
 };
 
-static void gpio_keys_report_event(struct gpio_button_data *bdata)
+static void gpio_keys_gpio_report_event(struct gpio_button_data *bdata)
 {
-	struct gpio_keys_button *button = bdata->button;
+	const struct gpio_keys_button *button = bdata->button;
 	struct input_dev *input = bdata->input;
 	unsigned int type = button->type ?: EV_KEY;
 	int state = (gpio_get_value_cansleep(button->gpio) ? 1 : 0) ^ button->active_low;
@@ -336,27 +340,26 @@ static void gpio_keys_report_event(struct gpio_button_data *bdata)
 	input_sync(input);
 }
 
-static void gpio_keys_work_func(struct work_struct *work)
+static void gpio_keys_gpio_work_func(struct work_struct *work)
 {
 	struct gpio_button_data *bdata =
 		container_of(work, struct gpio_button_data, work);
 
-	gpio_keys_report_event(bdata);
+	gpio_keys_gpio_report_event(bdata);
 }
 
-static void gpio_keys_timer(unsigned long _data)
+static void gpio_keys_gpio_timer(unsigned long _data)
 {
-	struct gpio_button_data *data = (struct gpio_button_data *)_data;
+	struct gpio_button_data *bdata = (struct gpio_button_data *)_data;
 
-	schedule_work(&data->work);
+	schedule_work(&bdata->work);
 }
 
-static irqreturn_t gpio_keys_isr(int irq, void *dev_id)
+static irqreturn_t gpio_keys_gpio_isr(int irq, void *dev_id)
 {
 	struct gpio_button_data *bdata = dev_id;
-	struct gpio_keys_button *button = bdata->button;
 
-	BUG_ON(irq != gpio_to_irq(button->gpio));
+	BUG_ON(irq != bdata->irq);
 
 	if (bdata->timer_debounce)
 		mod_timer(&bdata->timer,
@@ -367,31 +370,83 @@ static irqreturn_t gpio_keys_isr(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
+static void gpio_keys_irq_timer(unsigned long _data)
+{
+	struct gpio_button_data *bdata = (struct gpio_button_data *)_data;
+	struct input_dev *input = bdata->input;
+	unsigned long flags;
+
+	spin_lock_irqsave(&bdata->lock, flags);
+	if (bdata->key_pressed) {
+		input_event(input, EV_KEY, bdata->button->code, 0);
+		input_sync(input);
+		bdata->key_pressed = false;
+	}
+	spin_unlock_irqrestore(&bdata->lock, flags);
+}
+
+static irqreturn_t gpio_keys_irq_isr(int irq, void *dev_id)
+{
+	struct gpio_button_data *bdata = dev_id;
+	const struct gpio_keys_button *button = bdata->button;
+	struct input_dev *input = bdata->input;
+	unsigned long flags;
+
+	BUG_ON(irq != bdata->irq);
+
+	spin_lock_irqsave(&bdata->lock, flags);
+
+	if (!bdata->key_pressed) {
+		input_event(input, EV_KEY, button->code, 1);
+		input_sync(input);
+
+		if (!bdata->timer_debounce) {
+			input_event(input, EV_KEY, button->code, 0);
+			input_sync(input);
+			goto out;
+		}
+
+		bdata->key_pressed = true;
+	}
+
+	if (bdata->timer_debounce)
+		mod_timer(&bdata->timer,
+			jiffies + msecs_to_jiffies(bdata->timer_debounce));
+out:
+	spin_unlock_irqrestore(&bdata->lock, flags);
+	return IRQ_HANDLED;
+}
+
 static int __devinit gpio_keys_setup_key(struct platform_device *pdev,
+					 struct input_dev *input,
 					 struct gpio_button_data *bdata,
-					 struct gpio_keys_button *button)
+					 const struct gpio_keys_button *button)
 {
 	const char *desc = button->desc ? button->desc : "gpio_keys";
 	struct device *dev = &pdev->dev;
+	irq_handler_t isr;
 	unsigned long irqflags;
 	int irq, error;
 
-	setup_timer(&bdata->timer, gpio_keys_timer, (unsigned long)bdata);
-	INIT_WORK(&bdata->work, gpio_keys_work_func);
+	bdata->input = input;
+	bdata->button = button;
+	spin_lock_init(&bdata->lock);
+
+	if (gpio_is_valid(button->gpio)) {
 
 		error = gpio_request(button->gpio, desc);
 		if (error < 0) {
-		dev_err(dev, "failed to request GPIO %d, error %d\n",
+			dev_err(dev, "Failed to request GPIO %d, error %d\n",
 				button->gpio, error);
-		goto fail2;
+			return error;
 		}
 
 		error = gpio_direction_input(button->gpio);
 		if (error < 0) {
-		dev_err(dev, "failed to configure"
-			" direction for GPIO %d, error %d\n",
+			dev_err(dev,
+				"Failed to configure direction for GPIO %d, error %d\n",
 				button->gpio, error);
-		goto fail3;
+			goto fail;
 		}
 
 		if (button->debounce_interval) {
@@ -399,18 +454,49 @@ static int __devinit gpio_keys_setup_key(struct platform_device *pdev,
 					button->debounce_interval * 1000);
 			/* use timer if gpiolib doesn't provide debounce */
 			if (error < 0)
-			bdata->timer_debounce = button->debounce_interval;
+				bdata->timer_debounce =
+						button->debounce_interval;
 		}
 
 		irq = gpio_to_irq(button->gpio);
 		if (irq < 0) {
 			error = irq;
-		dev_err(dev, "Unable to get irq number for GPIO %d, error %d\n",
+			dev_err(dev,
+				"Unable to get irq number for GPIO %d, error %d\n",
 				button->gpio, error);
-		goto fail3;
+			goto fail;
 		}
+		bdata->irq = irq;
+
+		INIT_WORK(&bdata->work, gpio_keys_gpio_work_func);
+		setup_timer(&bdata->timer,
+			    gpio_keys_gpio_timer, (unsigned long)bdata);
 
+		isr = gpio_keys_gpio_isr;
 		irqflags = IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING;
+
+	} else {
+		if (!button->irq) {
+			dev_err(dev, "No IRQ specified\n");
+			return -EINVAL;
+		}
+		bdata->irq = button->irq;
+
+		if (button->type && button->type != EV_KEY) {
+			dev_err(dev, "Only EV_KEY allowed for IRQ buttons.\n");
+			return -EINVAL;
+		}
+
+		bdata->timer_debounce = button->debounce_interval;
+		setup_timer(&bdata->timer,
+			    gpio_keys_irq_timer, (unsigned long)bdata);
+
+		isr = gpio_keys_irq_isr;
+		irqflags = 0;
+	}
+
+	input_set_capability(input, button->type ?: EV_KEY, button->code);
+
 	/*
 	 * If platform has specified that the button can be disabled,
 	 * we don't want it to share the interrupt line.
@@ -418,18 +504,19 @@ static int __devinit gpio_keys_setup_key(struct platform_device *pdev,
 	if (!button->can_disable)
 		irqflags |= IRQF_SHARED;
 
-	error = request_threaded_irq(irq, NULL, gpio_keys_isr, irqflags, desc, bdata);
+	error = request_any_context_irq(bdata->irq, isr, irqflags, desc, bdata);
 	if (error < 0) {
 		dev_err(dev, "Unable to claim irq %d; error %d\n",
-			irq, error);
-		goto fail3;
+			bdata->irq, error);
+		goto fail;
 	}
 
 	return 0;
 
-fail3:
+fail:
+	if (gpio_is_valid(button->gpio))
 		gpio_free(button->gpio);
-fail2:
+
 	return error;
 }
 
@@ -547,9 +634,19 @@ static int gpio_keys_get_devtree_pdata(struct device *dev,
 
 #endif
 
+static void gpio_remove_key(struct gpio_button_data *bdata)
+{
+	free_irq(bdata->irq, bdata);
+	if (bdata->timer_debounce)
+		del_timer_sync(&bdata->timer);
+	cancel_work_sync(&bdata->work);
+	if (gpio_is_valid(bdata->button->gpio))
+		gpio_free(bdata->button->gpio);
+}
+
 static int __devinit gpio_keys_probe(struct platform_device *pdev)
 {
-	struct gpio_keys_platform_data *pdata = pdev->dev.platform_data;
+	const struct gpio_keys_platform_data *pdata = pdev->dev.platform_data;
 	struct gpio_keys_drvdata *ddata;
 	struct device *dev = &pdev->dev;
 	struct gpio_keys_platform_data alt_pdata;
@@ -599,21 +696,15 @@ static int __devinit gpio_keys_probe(struct platform_device *pdev)
 		__set_bit(EV_REP, input->evbit);
 
 	for (i = 0; i < pdata->nbuttons; i++) {
-		struct gpio_keys_button *button = &pdata->buttons[i];
+		const struct gpio_keys_button *button = &pdata->buttons[i];
 		struct gpio_button_data *bdata = &ddata->data[i];
-		unsigned int type = button->type ?: EV_KEY;
 
-		bdata->input = input;
-		bdata->button = button;
-
-		error = gpio_keys_setup_key(pdev, bdata, button);
+		error = gpio_keys_setup_key(pdev, input, bdata, button);
 		if (error)
 			goto fail2;
 
 		if (button->wakeup)
 			wakeup = 1;
-
-		input_set_capability(input, type, button->code);
 	}
 
 	error = sysfs_create_group(&pdev->dev.kobj, &gpio_keys_attr_group);
@@ -630,9 +721,12 @@ static int __devinit gpio_keys_probe(struct platform_device *pdev)
 		goto fail3;
 	}
 
-	/* get current state of buttons */
-	for (i = 0; i < pdata->nbuttons; i++)
-		gpio_keys_report_event(&ddata->data[i]);
+	/* get current state of buttons that are connected to GPIOs */
+	for (i = 0; i < pdata->nbuttons; i++) {
+		struct gpio_button_data *bdata = &ddata->data[i];
+		if (gpio_is_valid(bdata->button->gpio))
+			gpio_keys_gpio_report_event(bdata);
+	}
 	input_sync(input);
 
 	device_init_wakeup(&pdev->dev, wakeup);
@@ -642,13 +736,8 @@ static int __devinit gpio_keys_probe(struct platform_device *pdev)
  fail3:
 	sysfs_remove_group(&pdev->dev.kobj, &gpio_keys_attr_group);
  fail2:
-	while (--i >= 0) {
-		free_irq(gpio_to_irq(pdata->buttons[i].gpio), &ddata->data[i]);
-		if (ddata->data[i].timer_debounce)
-			del_timer_sync(&ddata->data[i].timer);
-		cancel_work_sync(&ddata->data[i].work);
-		gpio_free(pdata->buttons[i].gpio);
-	}
+	while (--i >= 0)
+		gpio_remove_key(&ddata->data[i]);
 
 	platform_set_drvdata(pdev, NULL);
  fail1:
@@ -671,14 +760,8 @@ static int __devexit gpio_keys_remove(struct platform_device *pdev)
 
 	device_init_wakeup(&pdev->dev, 0);
 
-	for (i = 0; i < ddata->n_buttons; i++) {
-		int irq = gpio_to_irq(ddata->data[i].button->gpio);
-		free_irq(irq, &ddata->data[i]);
-		if (ddata->data[i].timer_debounce)
-			del_timer_sync(&ddata->data[i].timer);
-		cancel_work_sync(&ddata->data[i].work);
-		gpio_free(ddata->data[i].button->gpio);
-	}
+	for (i = 0; i < ddata->n_buttons; i++)
+		gpio_remove_key(&ddata->data[i]);
 
 	input_unregister_device(input);
 
@@ -703,11 +786,9 @@ static int gpio_keys_suspend(struct device *dev)
 
 	if (device_may_wakeup(dev)) {
 		for (i = 0; i < ddata->n_buttons; i++) {
-			struct gpio_keys_button *button = ddata->data[i].button;
-			if (button->wakeup) {
-				int irq = gpio_to_irq(button->gpio);
-				enable_irq_wake(irq);
-			}
+			struct gpio_button_data *bdata = &ddata->data[i];
+			if (bdata->button->wakeup)
+				enable_irq_wake(bdata->irq);
 		}
 	}
 
@@ -720,14 +801,12 @@ static int gpio_keys_resume(struct device *dev)
 	int i;
 
 	for (i = 0; i < ddata->n_buttons; i++) {
+		struct gpio_button_data *bdata = &ddata->data[i];
+		if (bdata->button->wakeup && device_may_wakeup(dev))
+			disable_irq_wake(bdata->irq);
 
-		struct gpio_keys_button *button = ddata->data[i].button;
-		if (button->wakeup && device_may_wakeup(dev)) {
-			int irq = gpio_to_irq(button->gpio);
-			disable_irq_wake(irq);
-		}
-
-		gpio_keys_report_event(&ddata->data[i]);
+		if (gpio_is_valid(bdata->button->gpio))
+			gpio_keys_gpio_report_event(bdata);
 	}
 	input_sync(ddata->input);
 

drivers/input/keyboard/tegra-kbc.c

@@ -630,6 +630,7 @@ tegra_kbc_dt_parse_pdata(struct platform_device *pdev)
 	if (!np)
 		return NULL;
 
+	pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
 	if (!pdata)
 		return NULL;
 

drivers/input/mouse/sentelic.c

@@ -2,7 +2,7 @@
  * Finger Sensing Pad PS/2 mouse driver.
  *
  * Copyright (C) 2005-2007 Asia Vital Components Co., Ltd.
- * Copyright (C) 2005-2011 Tai-hwa Liang, Sentelic Corporation.
+ * Copyright (C) 2005-2012 Tai-hwa Liang, Sentelic Corporation.
  *
  *   This program is free software; you can redistribute it and/or
  *   modify it under the terms of the GNU General Public License
@@ -21,6 +21,7 @@
 
 #include <linux/module.h>
 #include <linux/input.h>
+#include <linux/input/mt.h>
 #include <linux/ctype.h>
 #include <linux/libps2.h>
 #include <linux/serio.h>
@@ -36,6 +37,9 @@
 #define	FSP_CMD_TIMEOUT		200
 #define	FSP_CMD_TIMEOUT2	30
 
+#define	GET_ABS_X(packet)	((packet[1] << 2) | ((packet[3] >> 2) & 0x03))
+#define	GET_ABS_Y(packet)	((packet[2] << 2) | (packet[3] & 0x03))
+
 /** Driver version. */
 static const char fsp_drv_ver[] = "1.0.0-K";
 
@@ -128,7 +132,8 @@ static int fsp_reg_read(struct psmouse *psmouse, int reg_addr, int *reg_val)
  out:
 	ps2_end_command(ps2dev);
 	psmouse_activate(psmouse);
-	dev_dbg(&ps2dev->serio->dev, "READ REG: 0x%02x is 0x%02x (rc = %d)\n",
+	psmouse_dbg(psmouse,
+		    "READ REG: 0x%02x is 0x%02x (rc = %d)\n",
 		    reg_addr, *reg_val, rc);
 	return rc;
 }
@@ -179,7 +184,8 @@ static int fsp_reg_write(struct psmouse *psmouse, int reg_addr, int reg_val)
 
  out:
 	ps2_end_command(ps2dev);
-	dev_dbg(&ps2dev->serio->dev, "WRITE REG: 0x%02x to 0x%02x (rc = %d)\n",
+	psmouse_dbg(psmouse,
+		    "WRITE REG: 0x%02x to 0x%02x (rc = %d)\n",
 		    reg_addr, reg_val, rc);
 	return rc;
 }
@@ -237,7 +243,8 @@ static int fsp_page_reg_read(struct psmouse *psmouse, int *reg_val)
  out:
 	ps2_end_command(ps2dev);
 	psmouse_activate(psmouse);
-	dev_dbg(&ps2dev->serio->dev, "READ PAGE REG: 0x%02x (rc = %d)\n",
+	psmouse_dbg(psmouse,
+		    "READ PAGE REG: 0x%02x (rc = %d)\n",
 		    *reg_val, rc);
 	return rc;
 }
@@ -274,7 +281,8 @@ static int fsp_page_reg_write(struct psmouse *psmouse, int reg_val)
 
  out:
 	ps2_end_command(ps2dev);
-	dev_dbg(&ps2dev->serio->dev, "WRITE PAGE REG: to 0x%02x (rc = %d)\n",
+	psmouse_dbg(psmouse,
+		    "WRITE PAGE REG: to 0x%02x (rc = %d)\n",
 		    reg_val, rc);
 	return rc;
 }
@@ -319,7 +327,7 @@ static int fsp_opc_tag_enable(struct psmouse *psmouse, bool enable)
 	int res = 0;
 
 	if (fsp_reg_read(psmouse, FSP_REG_OPC_QDOWN, &v) == -1) {
-		dev_err(&psmouse->ps2dev.serio->dev, "Unable get OPC state.\n");
+		psmouse_err(psmouse, "Unable get OPC state.\n");
 		return -EIO;
 	}
 
@@ -336,8 +344,7 @@ static int fsp_opc_tag_enable(struct psmouse *psmouse, bool enable)
 	}
 
 	if (res != 0) {
-		dev_err(&psmouse->ps2dev.serio->dev,
-			"Unable to enable OPC tag.\n");
+		psmouse_err(psmouse, "Unable to enable OPC tag.\n");
 		res = -EIO;
 	}
 
@@ -616,17 +623,39 @@ static struct attribute_group fsp_attribute_group = {
 };
 
 #ifdef	FSP_DEBUG
-static void fsp_packet_debug(unsigned char packet[])
+static void fsp_packet_debug(struct psmouse *psmouse, unsigned char packet[])
 {
 	static unsigned int ps2_packet_cnt;
 	static unsigned int ps2_last_second;
 	unsigned int jiffies_msec;
+	const char *packet_type = "UNKNOWN";
+	unsigned short abs_x = 0, abs_y = 0;
+
+	/* Interpret & dump the packet data. */
+	switch (packet[0] >> FSP_PKT_TYPE_SHIFT) {
+	case FSP_PKT_TYPE_ABS:
+		packet_type = "Absolute";
+		abs_x = GET_ABS_X(packet);
+		abs_y = GET_ABS_Y(packet);
+		break;
+	case FSP_PKT_TYPE_NORMAL:
+		packet_type = "Normal";
+		break;
+	case FSP_PKT_TYPE_NOTIFY:
+		packet_type = "Notify";
+		break;
+	case FSP_PKT_TYPE_NORMAL_OPC:
+		packet_type = "Normal-OPC";
+		break;
+	}
 
 	ps2_packet_cnt++;
 	jiffies_msec = jiffies_to_msecs(jiffies);
 	psmouse_dbg(psmouse,
-		    "%08dms PS/2 packets: %02x, %02x, %02x, %02x\n",
-		    jiffies_msec, packet[0], packet[1], packet[2], packet[3]);
+		    "%08dms %s packets: %02x, %02x, %02x, %02x; "
+		    "abs_x: %d, abs_y: %d\n",
+		    jiffies_msec, packet_type,
+		    packet[0], packet[1], packet[2], packet[3], abs_x, abs_y);
 
 	if (jiffies_msec - ps2_last_second > 1000) {
 		psmouse_dbg(psmouse, "PS/2 packets/sec = %d\n", ps2_packet_cnt);
@@ -635,17 +664,29 @@ static void fsp_packet_debug(unsigned char packet[])
 	}
 }
 #else
-static void fsp_packet_debug(unsigned char packet[])
+static void fsp_packet_debug(struct psmouse *psmouse, unsigned char packet[])
 {
 }
 #endif
 
+static void fsp_set_slot(struct input_dev *dev, int slot, bool active,
+			 unsigned int x, unsigned int y)
+{
+	input_mt_slot(dev, slot);
+	input_mt_report_slot_state(dev, MT_TOOL_FINGER, active);
+	if (active) {
+		input_report_abs(dev, ABS_MT_POSITION_X, x);
+		input_report_abs(dev, ABS_MT_POSITION_Y, y);
+	}
+}
+
 static psmouse_ret_t fsp_process_byte(struct psmouse *psmouse)
 {
 	struct input_dev *dev = psmouse->dev;
 	struct fsp_data *ad = psmouse->private;
 	unsigned char *packet = psmouse->packet;
 	unsigned char button_status = 0, lscroll = 0, rscroll = 0;
+	unsigned short abs_x, abs_y, fgrs = 0;
 	int rel_x, rel_y;
 
 	if (psmouse->pktcnt < 4)
@@ -655,16 +696,76 @@ static psmouse_ret_t fsp_process_byte(struct psmouse *psmouse)
 	 * Full packet accumulated, process it
 	 */
 
+	fsp_packet_debug(psmouse, packet);
+
 	switch (psmouse->packet[0] >> FSP_PKT_TYPE_SHIFT) {
 	case FSP_PKT_TYPE_ABS:
-		dev_warn(&psmouse->ps2dev.serio->dev,
-			 "Unexpected absolute mode packet, ignored.\n");
+		abs_x = GET_ABS_X(packet);
+		abs_y = GET_ABS_Y(packet);
+
+		if (packet[0] & FSP_PB0_MFMC) {
+			/*
+			 * MFMC packet: assume that there are two fingers on
+			 * pad
+			 */
+			fgrs = 2;
+
+			/* MFMC packet */
+			if (packet[0] & FSP_PB0_MFMC_FGR2) {
+				/* 2nd finger */
+				if (ad->last_mt_fgr == 2) {
+					/*
+					 * workaround for buggy firmware
+					 * which doesn't clear MFMC bit if
+					 * the 1st finger is up
+					 */
+					fgrs = 1;
+					fsp_set_slot(dev, 0, false, 0, 0);
+				}
+				ad->last_mt_fgr = 2;
+
+				fsp_set_slot(dev, 1, fgrs == 2, abs_x, abs_y);
+			} else {
+				/* 1st finger */
+				if (ad->last_mt_fgr == 1) {
+					/*
+					 * workaround for buggy firmware
+					 * which doesn't clear MFMC bit if
+					 * the 2nd finger is up
+					 */
+					fgrs = 1;
+					fsp_set_slot(dev, 1, false, 0, 0);
+				}
+				ad->last_mt_fgr = 1;
+				fsp_set_slot(dev, 0, fgrs != 0, abs_x, abs_y);
+			}
+		} else {
+			/* SFAC packet */
+
+			/* no multi-finger information */
+			ad->last_mt_fgr = 0;
+
+			if (abs_x != 0 && abs_y != 0)
+				fgrs = 1;
+
+			fsp_set_slot(dev, 0, fgrs > 0, abs_x, abs_y);
+			fsp_set_slot(dev, 1, false, 0, 0);
+		}
+		if (fgrs > 0) {
+			input_report_abs(dev, ABS_X, abs_x);
+			input_report_abs(dev, ABS_Y, abs_y);
+		}
+		input_report_key(dev, BTN_LEFT, packet[0] & 0x01);
+		input_report_key(dev, BTN_RIGHT, packet[0] & 0x02);
+		input_report_key(dev, BTN_TOUCH, fgrs);
+		input_report_key(dev, BTN_TOOL_FINGER, fgrs == 1);
+		input_report_key(dev, BTN_TOOL_DOUBLETAP, fgrs == 2);
 		break;
 
 	case FSP_PKT_TYPE_NORMAL_OPC:
 		/* on-pad click, filter it if necessary */
 		if ((ad->flags & FSPDRV_FLAG_EN_OPC) != FSPDRV_FLAG_EN_OPC)
-			packet[0] &= ~BIT(0);
+			packet[0] &= ~FSP_PB0_LBTN;
 		/* fall through */
 
 	case FSP_PKT_TYPE_NORMAL:
@@ -711,8 +812,6 @@ static psmouse_ret_t fsp_process_byte(struct psmouse *psmouse)
 
 	input_sync(dev);
 
-	fsp_packet_debug(packet);
-
 	return PSMOUSE_FULL_PACKET;
 }
 
@@ -736,17 +835,25 @@ static int fsp_activate_protocol(struct psmouse *psmouse)
 
 	ps2_command(ps2dev, param, PSMOUSE_CMD_GETID);
 	if (param[0] != 0x04) {
-		dev_err(&psmouse->ps2dev.serio->dev,
+		psmouse_err(psmouse,
 			    "Unable to enable 4 bytes packet format.\n");
 		return -EIO;
 	}
 
+	if (pad->ver < FSP_VER_STL3888_C0) {
+		/* Preparing relative coordinates output for older hardware */
 		if (fsp_reg_read(psmouse, FSP_REG_SYSCTL5, &val)) {
-		dev_err(&psmouse->ps2dev.serio->dev,
+			psmouse_err(psmouse,
 				    "Unable to read SYSCTL5 register.\n");
 			return -EIO;
 		}
 
+		if (fsp_get_buttons(psmouse, &pad->buttons)) {
+			psmouse_err(psmouse,
+				    "Unable to retrieve number of buttons.\n");
+			return -EIO;
+		}
+
 		val &= ~(FSP_BIT_EN_MSID7 | FSP_BIT_EN_MSID8 | FSP_BIT_EN_AUTO_MSID8);
 		/* Ensure we are not in absolute mode */
 		val &= ~FSP_BIT_EN_PKT_G0;
@@ -756,22 +863,78 @@ static int fsp_activate_protocol(struct psmouse *psmouse)
 		}
 
 		if (fsp_reg_write(psmouse, FSP_REG_SYSCTL5, val)) {
-		dev_err(&psmouse->ps2dev.serio->dev,
+			psmouse_err(psmouse,
 				    "Unable to set up required mode bits.\n");
 			return -EIO;
 		}
 
 		/*
-	 * Enable OPC tags such that driver can tell the difference between
-	 * on-pad and real button click
+		 * Enable OPC tags such that driver can tell the difference
+		 * between on-pad and real button click
 		 */
 		if (fsp_opc_tag_enable(psmouse, true))
-		dev_warn(&psmouse->ps2dev.serio->dev,
+			psmouse_warn(psmouse,
 				     "Failed to enable OPC tag mode.\n");
+		/* enable on-pad click by default */
+		pad->flags |= FSPDRV_FLAG_EN_OPC;
 
 		/* Enable on-pad vertical and horizontal scrolling */
 		fsp_onpad_vscr(psmouse, true);
 		fsp_onpad_hscr(psmouse, true);
+	} else {
+		/* Enable absolute coordinates output for Cx/Dx hardware */
+		if (fsp_reg_write(psmouse, FSP_REG_SWC1,
+				  FSP_BIT_SWC1_EN_ABS_1F |
+				  FSP_BIT_SWC1_EN_ABS_2F |
+				  FSP_BIT_SWC1_EN_FUP_OUT |
+				  FSP_BIT_SWC1_EN_ABS_CON)) {
+			psmouse_err(psmouse,
+				    "Unable to enable absolute coordinates output.\n");
+			return -EIO;
+		}
+	}
+
+	return 0;
+}
+
+static int fsp_set_input_params(struct psmouse *psmouse)
+{
+	struct input_dev *dev = psmouse->dev;
+	struct fsp_data *pad = psmouse->private;
+
+	if (pad->ver < FSP_VER_STL3888_C0) {
+		__set_bit(BTN_MIDDLE, dev->keybit);
+		__set_bit(BTN_BACK, dev->keybit);
+		__set_bit(BTN_FORWARD, dev->keybit);
+		__set_bit(REL_WHEEL, dev->relbit);
+		__set_bit(REL_HWHEEL, dev->relbit);
+	} else {
+		/*
+		 * Hardware prior to Cx performs much better in relative mode;
+		 * hence, only enable absolute coordinates output as well as
+		 * multi-touch output for the newer hardware.
+		 *
+		 * Maximum coordinates can be computed as:
+		 *
+		 *	number of scanlines * 64 - 57
+		 *
+		 * where number of X/Y scanline lines are 16/12.
+		 */
+		int abs_x = 967, abs_y = 711;
+
+		__set_bit(EV_ABS, dev->evbit);
+		__clear_bit(EV_REL, dev->evbit);
+		__set_bit(BTN_TOUCH, dev->keybit);
+		__set_bit(BTN_TOOL_FINGER, dev->keybit);
+		__set_bit(BTN_TOOL_DOUBLETAP, dev->keybit);
+		__set_bit(INPUT_PROP_SEMI_MT, dev->propbit);
+
+		input_set_abs_params(dev, ABS_X, 0, abs_x, 0, 0);
+		input_set_abs_params(dev, ABS_Y, 0, abs_y, 0, 0);
+		input_mt_init_slots(dev, 2);
+		input_set_abs_params(dev, ABS_MT_POSITION_X, 0, abs_x, 0, 0);
+		input_set_abs_params(dev, ABS_MT_POSITION_Y, 0, abs_y, 0, 0);
+	}
 
 	return 0;
 }
@@ -829,18 +992,16 @@ static int fsp_reconnect(struct psmouse *psmouse)
 int fsp_init(struct psmouse *psmouse)
 {
 	struct fsp_data *priv;
-	int ver, rev, buttons;
+	int ver, rev;
 	int error;
 
 	if (fsp_get_version(psmouse, &ver) ||
-	    fsp_get_revision(psmouse, &rev) ||
-	    fsp_get_buttons(psmouse, &buttons)) {
+	    fsp_get_revision(psmouse, &rev)) {
 		return -ENODEV;
 	}
 
-	psmouse_info(psmouse,
-		     "Finger Sensing Pad, hw: %d.%d.%d, sw: %s, buttons: %d\n",
-		     ver >> 4, ver & 0x0F, rev, fsp_drv_ver, buttons & 7);
+	psmouse_info(psmouse, "Finger Sensing Pad, hw: %d.%d.%d, sw: %s\n",
+		     ver >> 4, ver & 0x0F, rev, fsp_drv_ver);
 
 	psmouse->private = priv = kzalloc(sizeof(struct fsp_data), GFP_KERNEL);
 	if (!priv)
@@ -848,17 +1009,6 @@ int fsp_init(struct psmouse *psmouse)
 
 	priv->ver = ver;
 	priv->rev = rev;
-	priv->buttons = buttons;
-
-	/* enable on-pad click by default */
-	priv->flags |= FSPDRV_FLAG_EN_OPC;
-
-	/* Set up various supported input event bits */
-	__set_bit(BTN_MIDDLE, psmouse->dev->keybit);
-	__set_bit(BTN_BACK, psmouse->dev->keybit);
-	__set_bit(BTN_FORWARD, psmouse->dev->keybit);
-	__set_bit(REL_WHEEL, psmouse->dev->relbit);
-	__set_bit(REL_HWHEEL, psmouse->dev->relbit);
 
 	psmouse->protocol_handler = fsp_process_byte;
 	psmouse->disconnect = fsp_disconnect;
@@ -866,15 +1016,19 @@ int fsp_init(struct psmouse *psmouse)
 	psmouse->cleanup = fsp_reset;
 	psmouse->pktsize = 4;
 
-	/* set default packet output based on number of buttons we found */
 	error = fsp_activate_protocol(psmouse);
 	if (error)
 		goto err_out;
 
+	/* Set up various supported input event bits */
+	error = fsp_set_input_params(psmouse);
+	if (error)
+		goto err_out;
+
 	error = sysfs_create_group(&psmouse->ps2dev.serio->dev.kobj,
 				   &fsp_attribute_group);
 	if (error) {
-		dev_err(&psmouse->ps2dev.serio->dev,
+		psmouse_err(psmouse,
 			    "Failed to create sysfs attributes (%d)", error);
 		goto err_out;
 	}

drivers/input/mouse/sentelic.h

@@ -2,7 +2,7 @@
  * Finger Sensing Pad PS/2 mouse driver.
  *
  * Copyright (C) 2005-2007 Asia Vital Components Co., Ltd.
- * Copyright (C) 2005-2011 Tai-hwa Liang, Sentelic Corporation.
+ * Copyright (C) 2005-2012 Tai-hwa Liang, Sentelic Corporation.
  *
  *   This program is free software; you can redistribute it and/or
  *   modify it under the terms of the GNU General Public License
@@ -55,6 +55,16 @@
 #define	FSP_BIT_FIX_HSCR	BIT(5)
 #define	FSP_BIT_DRAG_LOCK	BIT(6)
 
+#define	FSP_REG_SWC1		(0x90)
+#define	FSP_BIT_SWC1_EN_ABS_1F	BIT(0)
+#define	FSP_BIT_SWC1_EN_GID	BIT(1)
+#define	FSP_BIT_SWC1_EN_ABS_2F	BIT(2)
+#define	FSP_BIT_SWC1_EN_FUP_OUT	BIT(3)
+#define	FSP_BIT_SWC1_EN_ABS_CON	BIT(4)
+#define	FSP_BIT_SWC1_GST_GRP0	BIT(5)
+#define	FSP_BIT_SWC1_GST_GRP1	BIT(6)
+#define	FSP_BIT_SWC1_BX_COMPAT	BIT(7)
+
 /* Finger-sensing Pad packet formating related definitions */
 
 /* absolute packet type */
@@ -64,12 +74,32 @@
 #define	FSP_PKT_TYPE_NORMAL_OPC	(0x03)
 #define	FSP_PKT_TYPE_SHIFT	(6)
 
+/* bit definitions for the first byte of report packet */
+#define	FSP_PB0_LBTN		BIT(0)
+#define	FSP_PB0_RBTN		BIT(1)
+#define	FSP_PB0_MBTN		BIT(2)
+#define	FSP_PB0_MFMC_FGR2	FSP_PB0_MBTN
+#define	FSP_PB0_MUST_SET	BIT(3)
+#define	FSP_PB0_PHY_BTN		BIT(4)
+#define	FSP_PB0_MFMC		BIT(5)
+
+/* hardware revisions */
+#define	FSP_VER_STL3888_A4	(0xC1)
+#define	FSP_VER_STL3888_B0	(0xD0)
+#define	FSP_VER_STL3888_B1	(0xD1)
+#define	FSP_VER_STL3888_B2	(0xD2)
+#define	FSP_VER_STL3888_C0	(0xE0)
+#define	FSP_VER_STL3888_C1	(0xE1)
+#define	FSP_VER_STL3888_D0	(0xE2)
+#define	FSP_VER_STL3888_D1	(0xE3)
+#define	FSP_VER_STL3888_E0	(0xE4)
+
 #ifdef __KERNEL__
 
 struct fsp_data {
 	unsigned char	ver;		/* hardware version */
 	unsigned char	rev;		/* hardware revison */
-	unsigned char	buttons;	/* Number of buttons */
+	unsigned int	buttons;	/* Number of buttons */
 	unsigned int	flags;
 #define	FSPDRV_FLAG_EN_OPC	(0x001)	/* enable on-pad clicking */
 
@@ -78,6 +108,7 @@ struct fsp_data {
 
 	unsigned char	last_reg;	/* Last register we requested read from */
 	unsigned char	last_val;
+	unsigned int	last_mt_fgr;	/* Last seen finger(multitouch) */
 };
 
 #ifdef CONFIG_MOUSE_PS2_SENTELIC

drivers/input/tablet/Kconfig

@@ -76,6 +76,7 @@ config TABLET_USB_KBTAB
 config TABLET_USB_WACOM
 	tristate "Wacom Intuos/Graphire tablet support (USB)"
 	depends on USB_ARCH_HAS_HCD
+	select POWER_SUPPLY
 	select USB
 	select NEW_LEDS
 	select LEDS_CLASS

drivers/input/tablet/wacom.h

@@ -88,6 +88,7 @@
 #include <linux/mod_devicetable.h>
 #include <linux/init.h>
 #include <linux/usb/input.h>
+#include <linux/power_supply.h>
 #include <asm/unaligned.h>
 
 /*
@@ -112,6 +113,7 @@ struct wacom {
 	struct urb *irq;
 	struct wacom_wac wacom_wac;
 	struct mutex lock;
+	struct work_struct work;
 	bool open;
 	char phys[32];
 	struct wacom_led {
@@ -120,8 +122,15 @@ struct wacom {
 		u8 hlv;       /* status led brightness button pressed (1..127) */
 		u8 img_lum;   /* OLED matrix display brightness */
 	} led;
+	struct power_supply battery;
 };
 
+static inline void wacom_schedule_work(struct wacom_wac *wacom_wac)
+{
+	struct wacom *wacom = container_of(wacom_wac, struct wacom, wacom_wac);
+	schedule_work(&wacom->work);
+}
+
 extern const struct usb_device_id wacom_ids[];
 
 void wacom_wac_irq(struct wacom_wac *wacom_wac, size_t len);

drivers/input/tablet/wacom_sys.c

@@ -167,6 +167,19 @@ static void wacom_close(struct input_dev *dev)
 		usb_autopm_put_interface(wacom->intf);
 }
 
+/*
+ * Static values for max X/Y and resolution of Pen interface is stored in
+ * features. This mean physical size of active area can be computed.
+ * This is useful to do when Pen and Touch have same active area of tablet.
+ * This means for Touch device, we only need to find max X/Y value and we
+ * have enough information to compute resolution of touch.
+ */
+static void wacom_set_phy_from_res(struct wacom_features *features)
+{
+	features->x_phy = (features->x_max * 100) / features->x_resolution;
+	features->y_phy = (features->y_max * 100) / features->y_resolution;
+}
+
 static int wacom_parse_logical_collection(unsigned char *report,
 					  struct wacom_features *features)
 {
@@ -178,15 +191,7 @@ static int wacom_parse_logical_collection(unsigned char *report,
 		features->pktlen = WACOM_PKGLEN_BBTOUCH3;
 		features->device_type = BTN_TOOL_FINGER;
 
-		/*
-		 * Stylus and Touch have same active area
-		 * so compute physical size based on stylus
-		 * data before its overwritten.
-		 */
-		features->x_phy =
-			(features->x_max * 100) / features->x_resolution;
-		features->y_phy =
-			(features->y_max * 100) / features->y_resolution;
+		wacom_set_phy_from_res(features);
 
 		features->x_max = features->y_max =
 			get_unaligned_le16(&report[10]);
@@ -422,6 +427,7 @@ static int wacom_query_tablet_data(struct usb_interface *intf, struct wacom_feat
 						report_id, rep_data, 4, 1);
 		} while ((error < 0 || rep_data[1] != 4) && limit++ < WAC_MSG_RETRIES);
 	} else if (features->type != TABLETPC &&
+		   features->type != WIRELESS &&
 		   features->device_type == BTN_TOOL_PEN) {
 		do {
 			rep_data[0] = 2;
@@ -454,6 +460,21 @@ static int wacom_retrieve_hid_descriptor(struct usb_interface *intf,
 	features->pressure_fuzz = 0;
 	features->distance_fuzz = 0;
 
+	/*
+	 * The wireless device HID is basic and layout conflicts with
+	 * other tablets (monitor and touch interface can look like pen).
+	 * Skip the query for this type and modify defaults based on
+	 * interface number.
+	 */
+	if (features->type == WIRELESS) {
+		if (intf->cur_altsetting->desc.bInterfaceNumber == 0) {
+			features->device_type = 0;
+		} else if (intf->cur_altsetting->desc.bInterfaceNumber == 2) {
+			features->device_type = BTN_TOOL_DOUBLETAP;
+			features->pktlen = WACOM_PKGLEN_BBTOUCH3;
+		}
+	}
+
 	/* only Tablet PCs and Bamboo P&T need to retrieve the info */
 	if ((features->type != TABLETPC) && (features->type != TABLETPC2FG) &&
 	    (features->type != BAMBOO_PT))
@@ -822,6 +843,152 @@ static void wacom_destroy_leds(struct wacom *wacom)
 	}
 }
 
+static enum power_supply_property wacom_battery_props[] = {
+	POWER_SUPPLY_PROP_CAPACITY
+};
+
+static int wacom_battery_get_property(struct power_supply *psy,
+				      enum power_supply_property psp,
+				      union power_supply_propval *val)
+{
+	struct wacom *wacom = container_of(psy, struct wacom, battery);
+	int ret = 0;
+
+	switch (psp) {
+		case POWER_SUPPLY_PROP_CAPACITY:
+			val->intval =
+				wacom->wacom_wac.battery_capacity * 100 / 31;
+			break;
+		default:
+			ret = -EINVAL;
+			break;
+	}
+
+	return ret;
+}
+
+static int wacom_initialize_battery(struct wacom *wacom)
+{
+	int error = 0;
+
+	if (wacom->wacom_wac.features.quirks & WACOM_QUIRK_MONITOR) {
+		wacom->battery.properties = wacom_battery_props;
+		wacom->battery.num_properties = ARRAY_SIZE(wacom_battery_props);
+		wacom->battery.get_property = wacom_battery_get_property;
+		wacom->battery.name = "wacom_battery";
+		wacom->battery.type = POWER_SUPPLY_TYPE_BATTERY;
+		wacom->battery.use_for_apm = 0;
+
+		error = power_supply_register(&wacom->usbdev->dev,
+					      &wacom->battery);
+	}
+
+	return error;
+}
+
+static void wacom_destroy_battery(struct wacom *wacom)
+{
+	if (wacom->wacom_wac.features.quirks & WACOM_QUIRK_MONITOR)
+		power_supply_unregister(&wacom->battery);
+}
+
+static int wacom_register_input(struct wacom *wacom)
+{
+	struct input_dev *input_dev;
+	struct usb_interface *intf = wacom->intf;
+	struct usb_device *dev = interface_to_usbdev(intf);
+	struct wacom_wac *wacom_wac = &(wacom->wacom_wac);
+	int error;
+
+	input_dev = input_allocate_device();
+	if (!input_dev)
+		return -ENOMEM;
+
+	input_dev->name = wacom_wac->name;
+	input_dev->dev.parent = &intf->dev;
+	input_dev->open = wacom_open;
+	input_dev->close = wacom_close;
+	usb_to_input_id(dev, &input_dev->id);
+	input_set_drvdata(input_dev, wacom);
+
+	wacom_wac->input = input_dev;
+	wacom_setup_input_capabilities(input_dev, wacom_wac);
+
+	error = input_register_device(input_dev);
+	if (error) {
+		input_free_device(input_dev);
+		wacom_wac->input = NULL;
+	}
+
+	return error;
+}
+
+static void wacom_wireless_work(struct work_struct *work)
+{
+	struct wacom *wacom = container_of(work, struct wacom, work);
+	struct usb_device *usbdev = wacom->usbdev;
+	struct wacom_wac *wacom_wac = &wacom->wacom_wac;
+
+	/*
+	 * Regardless if this is a disconnect or a new tablet,
+	 * remove any existing input devices.
+	 */
+
+	/* Stylus interface */
+	wacom = usb_get_intfdata(usbdev->config->interface[1]);
+	if (wacom->wacom_wac.input)
+		input_unregister_device(wacom->wacom_wac.input);
+	wacom->wacom_wac.input = 0;
+
+	/* Touch interface */
+	wacom = usb_get_intfdata(usbdev->config->interface[2]);
+	if (wacom->wacom_wac.input)
+		input_unregister_device(wacom->wacom_wac.input);
+	wacom->wacom_wac.input = 0;
+
+	if (wacom_wac->pid == 0) {
+		printk(KERN_INFO "wacom: wireless tablet disconnected\n");
+	} else {
+		const struct usb_device_id *id = wacom_ids;
+
+		printk(KERN_INFO
+		       "wacom: wireless tablet connected with PID %x\n",
+		       wacom_wac->pid);
+
+		while (id->match_flags) {
+			if (id->idVendor == USB_VENDOR_ID_WACOM &&
+			    id->idProduct == wacom_wac->pid)
+				break;
+			id++;
+		}
+
+		if (!id->match_flags) {
+			printk(KERN_INFO
+			       "wacom: ignorning unknown PID.\n");
+			return;
+		}
+
+		/* Stylus interface */
+		wacom = usb_get_intfdata(usbdev->config->interface[1]);
+		wacom_wac = &wacom->wacom_wac;
+		wacom_wac->features =
+			*((struct wacom_features *)id->driver_info);
+		wacom_wac->features.device_type = BTN_TOOL_PEN;
+		wacom_register_input(wacom);
+
+		/* Touch interface */
+		wacom = usb_get_intfdata(usbdev->config->interface[2]);
+		wacom_wac = &wacom->wacom_wac;
+		wacom_wac->features =
+			*((struct wacom_features *)id->driver_info);
+		wacom_wac->features.pktlen = WACOM_PKGLEN_BBTOUCH3;
+		wacom_wac->features.device_type = BTN_TOOL_FINGER;
+		wacom_set_phy_from_res(&wacom_wac->features);
+		wacom_wac->features.x_max = wacom_wac->features.y_max = 4096;
+		wacom_register_input(wacom);
+	}
+}
+
 static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *id)
 {
 	struct usb_device *dev = interface_to_usbdev(intf);
@@ -829,18 +996,14 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i
 	struct wacom *wacom;
 	struct wacom_wac *wacom_wac;
 	struct wacom_features *features;
-	struct input_dev *input_dev;
 	int error;
 
 	if (!id->driver_info)
 		return -EINVAL;
 
 	wacom = kzalloc(sizeof(struct wacom), GFP_KERNEL);
-	input_dev = input_allocate_device();
-	if (!wacom || !input_dev) {
-		error = -ENOMEM;
-		goto fail1;
-	}
+	if (!wacom)
+		return -ENOMEM;
 
 	wacom_wac = &wacom->wacom_wac;
 	wacom_wac->features = *((struct wacom_features *)id->driver_info);
@@ -866,11 +1029,10 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i
 	wacom->usbdev = dev;
 	wacom->intf = intf;
 	mutex_init(&wacom->lock);
+	INIT_WORK(&wacom->work, wacom_wireless_work);
 	usb_make_path(dev, wacom->phys, sizeof(wacom->phys));
 	strlcat(wacom->phys, "/input0", sizeof(wacom->phys));
 
-	wacom_wac->input = input_dev;
-
 	endpoint = &intf->cur_altsetting->endpoint[0].desc;
 
 	/* Retrieve the physical and logical size for OEM devices */
@@ -894,15 +1056,6 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i
 			goto fail3;
 	}
 
-	input_dev->name = wacom_wac->name;
-	input_dev->dev.parent = &intf->dev;
-	input_dev->open = wacom_open;
-	input_dev->close = wacom_close;
-	usb_to_input_id(dev, &input_dev->id);
-	input_set_drvdata(input_dev, wacom);
-
-	wacom_setup_input_capabilities(input_dev, wacom_wac);
-
 	usb_fill_int_urb(wacom->irq, dev,
 			 usb_rcvintpipe(dev, endpoint->bEndpointAddress),
 			 wacom_wac->data, features->pktlen,
@@ -914,22 +1067,34 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i
 	if (error)
 		goto fail4;
 
-	error = input_register_device(input_dev);
+	error = wacom_initialize_battery(wacom);
 	if (error)
 		goto fail5;
 
+	if (!(features->quirks & WACOM_QUIRK_NO_INPUT)) {
+		error = wacom_register_input(wacom);
+		if (error)
+			goto fail6;
+	}
+
 	/* Note that if query fails it is not a hard failure */
 	wacom_query_tablet_data(intf, features);
 
 	usb_set_intfdata(intf, wacom);
+
+	if (features->quirks & WACOM_QUIRK_MONITOR) {
+		if (usb_submit_urb(wacom->irq, GFP_KERNEL))
+			goto fail5;
+	}
+
 	return 0;
 
+ fail6: wacom_destroy_battery(wacom);
  fail5: wacom_destroy_leds(wacom);
  fail4:	wacom_remove_shared_data(wacom_wac);
  fail3:	usb_free_urb(wacom->irq);
  fail2:	usb_free_coherent(dev, WACOM_PKGLEN_MAX, wacom_wac->data, wacom->data_dma);
- fail1:	input_free_device(input_dev);
-	kfree(wacom);
+ fail1:	kfree(wacom);
 	return error;
 }
 
@@ -940,7 +1105,10 @@ static void wacom_disconnect(struct usb_interface *intf)
 	usb_set_intfdata(intf, NULL);
 
 	usb_kill_urb(wacom->irq);
+	cancel_work_sync(&wacom->work);
+	if (wacom->wacom_wac.input)
 		input_unregister_device(wacom->wacom_wac.input);
+	wacom_destroy_battery(wacom);
 	wacom_destroy_leds(wacom);
 	usb_free_urb(wacom->irq);
 	usb_free_coherent(interface_to_usbdev(intf), WACOM_PKGLEN_MAX,
@@ -972,7 +1140,8 @@ static int wacom_resume(struct usb_interface *intf)
 	wacom_query_tablet_data(intf, features);
 	wacom_led_control(wacom);
 
-	if (wacom->open && usb_submit_urb(wacom->irq, GFP_NOIO) < 0)
+	if ((wacom->open || features->quirks & WACOM_QUIRK_MONITOR)
+	     && usb_submit_urb(wacom->irq, GFP_NOIO) < 0)
 		rv = -EIO;
 
 	mutex_unlock(&wacom->lock);

drivers/input/tablet/wacom_wac.c

@@ -1044,6 +1044,35 @@ static int wacom_bpt_irq(struct wacom_wac *wacom, size_t len)
 	return 0;
 }
 
+static int wacom_wireless_irq(struct wacom_wac *wacom, size_t len)
+{
+	unsigned char *data = wacom->data;
+	int connected;
+
+	if (len != WACOM_PKGLEN_WIRELESS || data[0] != 0x80)
+		return 0;
+
+	connected = data[1] & 0x01;
+	if (connected) {
+		int pid, battery;
+
+		pid = get_unaligned_be16(&data[6]);
+		battery = data[5] & 0x3f;
+		if (wacom->pid != pid) {
+			wacom->pid = pid;
+			wacom_schedule_work(wacom);
+		}
+		wacom->battery_capacity = battery;
+	} else if (wacom->pid != 0) {
+		/* disconnected while previously connected */
+		wacom->pid = 0;
+		wacom_schedule_work(wacom);
+		wacom->battery_capacity = 0;
+	}
+
+	return 0;
+}
+
 void wacom_wac_irq(struct wacom_wac *wacom_wac, size_t len)
 {
 	bool sync;
@@ -1094,6 +1123,10 @@ void wacom_wac_irq(struct wacom_wac *wacom_wac, size_t len)
 		sync = wacom_bpt_irq(wacom_wac, len);
 		break;
 
+	case WIRELESS:
+		sync = wacom_wireless_irq(wacom_wac, len);
+		break;
+
 	default:
 		sync = false;
 		break;
@@ -1155,7 +1188,7 @@ void wacom_setup_device_quirks(struct wacom_features *features)
 
 	/* these device have multiple inputs */
 	if (features->type == TABLETPC || features->type == TABLETPC2FG ||
-	    features->type == BAMBOO_PT)
+	    features->type == BAMBOO_PT || features->type == WIRELESS)
 		features->quirks |= WACOM_QUIRK_MULTI_INPUT;
 
 	/* quirk for bamboo touch with 2 low res touches */
@@ -1167,6 +1200,16 @@ void wacom_setup_device_quirks(struct wacom_features *features)
 		features->y_fuzz <<= 5;
 		features->quirks |= WACOM_QUIRK_BBTOUCH_LOWRES;
 	}
+
+	if (features->type == WIRELESS) {
+
+		/* monitor never has input and pen/touch have delayed create */
+		features->quirks |= WACOM_QUIRK_NO_INPUT;
+
+		/* must be monitor interface if no device_type set */
+		if (!features->device_type)
+			features->quirks |= WACOM_QUIRK_MONITOR;
+	}
 }
 
 static unsigned int wacom_calculate_touch_res(unsigned int logical_max,
@@ -1640,6 +1683,9 @@ static const struct wacom_features wacom_features_0xEC =
 static const struct wacom_features wacom_features_0x47 =
 	{ "Wacom Intuos2 6x8",    WACOM_PKGLEN_INTUOS,    20320, 16240, 1023,
 	  31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+static const struct wacom_features wacom_features_0x84 =
+	{ "Wacom Wireless Receiver", WACOM_PKGLEN_WIRELESS, 0, 0, 0,
+	  0, WIRELESS, 0, 0 };
 static const struct wacom_features wacom_features_0xD0 =
 	{ "Wacom Bamboo 2FG",     WACOM_PKGLEN_BBFUN,     14720,  9200, 1023,
 	  31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
@@ -1766,6 +1812,7 @@ const struct usb_device_id wacom_ids[] = {
 	{ USB_DEVICE_DETAILED(0xCE, USB_CLASS_HID,
 			      USB_INTERFACE_SUBCLASS_BOOT,
 			      USB_INTERFACE_PROTOCOL_MOUSE) },
+	{ USB_DEVICE_WACOM(0x84) },
 	{ USB_DEVICE_WACOM(0xD0) },
 	{ USB_DEVICE_WACOM(0xD1) },
 	{ USB_DEVICE_WACOM(0xD2) },

drivers/input/tablet/wacom_wac.h

@@ -24,6 +24,7 @@
 #define WACOM_PKGLEN_BBTOUCH	20
 #define WACOM_PKGLEN_BBTOUCH3	64
 #define WACOM_PKGLEN_BBPEN	10
+#define WACOM_PKGLEN_WIRELESS	32
 
 /* device IDs */
 #define STYLUS_DEVICE_ID	0x02
@@ -45,6 +46,8 @@
 /* device quirks */
 #define WACOM_QUIRK_MULTI_INPUT		0x0001
 #define WACOM_QUIRK_BBTOUCH_LOWRES	0x0002
+#define WACOM_QUIRK_NO_INPUT		0x0004
+#define WACOM_QUIRK_MONITOR		0x0008
 
 enum {
 	PENPARTNER = 0,
@@ -54,6 +57,7 @@ enum {
 	PL,
 	DTU,
 	BAMBOO_PT,
+	WIRELESS,
 	INTUOS,
 	INTUOS3S,
 	INTUOS3,
@@ -107,6 +111,8 @@ struct wacom_wac {
 	struct wacom_features features;
 	struct wacom_shared *shared;
 	struct input_dev *input;
+	int pid;
+	int battery_capacity;
 };
 
 #endif

include/linux/gpio_keys.h

@@ -6,7 +6,7 @@ struct device;
 struct gpio_keys_button {
 	/* Configuration parameters */
 	unsigned int code;	/* input event code (KEY_*, SW_*) */
-	int gpio;
+	int gpio;		/* -1 if this key does not support gpio */
 	int active_low;
 	const char *desc;
 	unsigned int type;	/* input event type (EV_KEY, EV_SW, EV_ABS) */
@@ -14,6 +14,7 @@ struct gpio_keys_button {
 	int debounce_interval;	/* debounce ticks interval in msecs */
 	bool can_disable;
 	int value;		/* axis value for EV_ABS */
+	unsigned int irq;	/* Irq number in case of interrupt keys */
 };
 
 struct gpio_keys_platform_data {