Commit 2fe1bc1f authored by Andi Kleen's avatar Andi Kleen Committed by Ingo Molnar

perf/x86: Enable free running PEBS for REGS_USER/INTR

[ Note, this is a Git cherry-pick of the following commit:

    a47ba4d7 ("perf/x86: Enable free running PEBS for REGS_USER/INTR")

  ... for easier x86 PTI code testing and back-porting. ]

Currently free running PEBS is disabled when user or interrupt
registers are requested. Most of the registers are actually
available in the PEBS record and can be supported.

So we just need to check for the supported registers and then
allow it: it is all except for the segment register.

For user registers this only works when the counter is limited
to ring 3 only, so this also needs to be checked.
Signed-off-by: default avatarAndi Kleen <ak@linux.intel.com>
Signed-off-by: default avatarPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170831214630.21892-1-andi@firstfloor.orgSigned-off-by: default avatarIngo Molnar <mingo@kernel.org>
parent f2dbad36
......@@ -2958,6 +2958,10 @@ static unsigned long intel_pmu_free_running_flags(struct perf_event *event)
if (event->attr.use_clockid)
flags &= ~PERF_SAMPLE_TIME;
if (!event->attr.exclude_kernel)
flags &= ~PERF_SAMPLE_REGS_USER;
if (event->attr.sample_regs_user & ~PEBS_REGS)
flags &= ~(PERF_SAMPLE_REGS_USER | PERF_SAMPLE_REGS_INTR);
return flags;
}
......
......@@ -85,13 +85,15 @@ struct amd_nb {
* Flags PEBS can handle without an PMI.
*
* TID can only be handled by flushing at context switch.
* REGS_USER can be handled for events limited to ring 3.
*
*/
#define PEBS_FREERUNNING_FLAGS \
(PERF_SAMPLE_IP | PERF_SAMPLE_TID | PERF_SAMPLE_ADDR | \
PERF_SAMPLE_ID | PERF_SAMPLE_CPU | PERF_SAMPLE_STREAM_ID | \
PERF_SAMPLE_DATA_SRC | PERF_SAMPLE_IDENTIFIER | \
PERF_SAMPLE_TRANSACTION | PERF_SAMPLE_PHYS_ADDR)
PERF_SAMPLE_TRANSACTION | PERF_SAMPLE_PHYS_ADDR | \
PERF_SAMPLE_REGS_INTR | PERF_SAMPLE_REGS_USER)
/*
* A debug store configuration.
......@@ -110,6 +112,26 @@ struct debug_store {
u64 pebs_event_reset[MAX_PEBS_EVENTS];
};
#define PEBS_REGS \
(PERF_REG_X86_AX | \
PERF_REG_X86_BX | \
PERF_REG_X86_CX | \
PERF_REG_X86_DX | \
PERF_REG_X86_DI | \
PERF_REG_X86_SI | \
PERF_REG_X86_SP | \
PERF_REG_X86_BP | \
PERF_REG_X86_IP | \
PERF_REG_X86_FLAGS | \
PERF_REG_X86_R8 | \
PERF_REG_X86_R9 | \
PERF_REG_X86_R10 | \
PERF_REG_X86_R11 | \
PERF_REG_X86_R12 | \
PERF_REG_X86_R13 | \
PERF_REG_X86_R14 | \
PERF_REG_X86_R15)
/*
* Per register state.
*/
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment