Commit 3008ddbe authored by Chanwoo Choi's avatar Chanwoo Choi Committed by Lee Jones

mfd: max14577: Add max14577 MFD driver core

This patch adds max14577 core/irq driver to support MUIC(Micro USB IC)
device and charger device and support irq domain method to control
internal interrupt of max14577 device. Also, this patch supports DT
binding with max14577_i2c_parse_dt().

The MAXIM 14577 chip contains Micro-USB Interface Circuit and Li+ Battery
Charger. It contains accessory and USB charger detection logic. It supports
USB 2.0 Hi-Speed, UART and stereo audio signals over Micro-USB connector.

The battery charger is compliant with the USB Battery Charging Specification
Revision 1.1. It has also SFOUT LDO output for powering USB devices.
Reviewed-by: default avatarMark Brown <broonie@linaro.org>
Signed-off-by: default avatarChanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: default avatarKrzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: default avatarKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: default avatarLee Jones <lee.jones@linaro.org>
parent f6d6daaf
......@@ -321,6 +321,19 @@ config MFD_88PM860X
select individual components like voltage regulators, RTC and
battery-charger under the corresponding menus.
config MFD_MAX14577
bool "Maxim Semiconductor MAX14577 MUIC + Charger Support"
depends on I2C=y
select MFD_CORE
select REGMAP_I2C
select IRQ_DOMAIN
help
Say yes here to support for Maxim Semiconductor MAX14577.
This is a Micro-USB IC with Charger controls on chip.
This driver provides common support for accessing the device;
additional drivers must be enabled in order to use the functionality
of the device.
config MFD_MAX77686
bool "Maxim Semiconductor MAX77686 PMIC Support"
depends on I2C=y
......
......@@ -110,6 +110,7 @@ obj-$(CONFIG_MFD_DA9055) += da9055.o
da9063-objs := da9063-core.o da9063-irq.o da9063-i2c.o
obj-$(CONFIG_MFD_DA9063) += da9063.o
obj-$(CONFIG_MFD_MAX14577) += max14577.o
obj-$(CONFIG_MFD_MAX77686) += max77686.o max77686-irq.o
obj-$(CONFIG_MFD_MAX77693) += max77693.o max77693-irq.o
obj-$(CONFIG_MFD_MAX8907) += max8907.o
......
/*
* max14577.c - mfd core driver for the Maxim 14577
*
* Copyright (C) 2013 Samsung Electrnoics
* Chanwoo Choi <cw00.choi@samsung.com>
* Krzysztof Kozlowski <k.kozlowski@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* This driver is based on max8997.c
*/
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/mfd/core.h>
#include <linux/mfd/max14577.h>
#include <linux/mfd/max14577-private.h>
static struct mfd_cell max14577_devs[] = {
{ .name = "max14577-muic", },
{ .name = "max14577-regulator", },
{ .name = "max14577-charger", },
};
static bool max14577_volatile_reg(struct device *dev, unsigned int reg)
{
switch (reg) {
case MAX14577_REG_INT1 ... MAX14577_REG_STATUS3:
return true;
default:
break;
}
return false;
}
static const struct regmap_config max14577_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
.volatile_reg = max14577_volatile_reg,
.max_register = MAX14577_REG_END,
};
static const struct regmap_irq max14577_irqs[] = {
/* INT1 interrupts */
{ .reg_offset = 0, .mask = INT1_ADC_MASK, },
{ .reg_offset = 0, .mask = INT1_ADCLOW_MASK, },
{ .reg_offset = 0, .mask = INT1_ADCERR_MASK, },
/* INT2 interrupts */
{ .reg_offset = 1, .mask = INT2_CHGTYP_MASK, },
{ .reg_offset = 1, .mask = INT2_CHGDETRUN_MASK, },
{ .reg_offset = 1, .mask = INT2_DCDTMR_MASK, },
{ .reg_offset = 1, .mask = INT2_DBCHG_MASK, },
{ .reg_offset = 1, .mask = INT2_VBVOLT_MASK, },
/* INT3 interrupts */
{ .reg_offset = 2, .mask = INT3_EOC_MASK, },
{ .reg_offset = 2, .mask = INT3_CGMBC_MASK, },
{ .reg_offset = 2, .mask = INT3_OVP_MASK, },
{ .reg_offset = 2, .mask = INT3_MBCCHGERR_MASK, },
};
static const struct regmap_irq_chip max14577_irq_chip = {
.name = "max14577",
.status_base = MAX14577_REG_INT1,
.mask_base = MAX14577_REG_INTMASK1,
.mask_invert = 1,
.num_regs = 3,
.irqs = max14577_irqs,
.num_irqs = ARRAY_SIZE(max14577_irqs),
};
static int max14577_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
struct max14577 *max14577;
struct max14577_platform_data *pdata = dev_get_platdata(&i2c->dev);
struct device_node *np = i2c->dev.of_node;
u8 reg_data;
int ret = 0;
if (np) {
pdata = devm_kzalloc(&i2c->dev, sizeof(*pdata), GFP_KERNEL);
if (!pdata)
return -ENOMEM;
i2c->dev.platform_data = pdata;
}
if (!pdata) {
dev_err(&i2c->dev, "No platform data found: %ld\n",
PTR_ERR(pdata));
return -EINVAL;
}
max14577 = devm_kzalloc(&i2c->dev, sizeof(*max14577), GFP_KERNEL);
if (!max14577)
return -ENOMEM;
i2c_set_clientdata(i2c, max14577);
max14577->dev = &i2c->dev;
max14577->i2c = i2c;
max14577->irq = i2c->irq;
max14577->regmap = devm_regmap_init_i2c(i2c, &max14577_regmap_config);
if (IS_ERR(max14577->regmap)) {
ret = PTR_ERR(max14577->regmap);
dev_err(max14577->dev, "Failed to allocate register map: %d\n",
ret);
return ret;
}
ret = max14577_read_reg(max14577->regmap, MAX14577_REG_DEVICEID,
&reg_data);
if (ret) {
dev_err(max14577->dev, "Device not found on this channel: %d\n",
ret);
return ret;
}
max14577->vendor_id = ((reg_data & DEVID_VENDORID_MASK) >>
DEVID_VENDORID_SHIFT);
max14577->device_id = ((reg_data & DEVID_DEVICEID_MASK) >>
DEVID_DEVICEID_SHIFT);
dev_info(max14577->dev, "Device ID: 0x%x, vendor: 0x%x\n",
max14577->device_id, max14577->vendor_id);
ret = regmap_add_irq_chip(max14577->regmap, max14577->irq,
IRQF_TRIGGER_FALLING | IRQF_ONESHOT, 0,
&max14577_irq_chip,
&max14577->irq_data);
if (ret != 0) {
dev_err(&i2c->dev, "Failed to request IRQ %d: %d\n",
max14577->irq, ret);
return ret;
}
ret = mfd_add_devices(max14577->dev, -1, max14577_devs,
ARRAY_SIZE(max14577_devs), NULL, 0,
regmap_irq_get_domain(max14577->irq_data));
if (ret < 0)
goto err_mfd;
device_init_wakeup(max14577->dev, 1);
return 0;
err_mfd:
regmap_del_irq_chip(max14577->irq, max14577->irq_data);
return ret;
}
static int max14577_i2c_remove(struct i2c_client *i2c)
{
struct max14577 *max14577 = i2c_get_clientdata(i2c);
mfd_remove_devices(max14577->dev);
regmap_del_irq_chip(max14577->irq, max14577->irq_data);
return 0;
}
static const struct i2c_device_id max14577_i2c_id[] = {
{ "max14577", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, max14577_i2c_id);
static int max14577_suspend(struct device *dev)
{
struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
struct max14577 *max14577 = i2c_get_clientdata(i2c);
if (device_may_wakeup(dev)) {
enable_irq_wake(max14577->irq);
/*
* MUIC IRQ must be disabled during suspend if this is
* a wake up source because it will be handled before
* resuming I2C.
*
* When device is woken up from suspend (e.g. by ADC change),
* an interrupt occurs before resuming I2C bus controller.
* Interrupt handler tries to read registers but this read
* will fail because I2C is still suspended.
*/
disable_irq(max14577->irq);
}
return 0;
}
static int max14577_resume(struct device *dev)
{
struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
struct max14577 *max14577 = i2c_get_clientdata(i2c);
if (device_may_wakeup(dev)) {
disable_irq_wake(max14577->irq);
enable_irq(max14577->irq);
}
return 0;
}
static struct of_device_id max14577_dt_match[] = {
{ .compatible = "maxim,max14577", },
{},
};
static SIMPLE_DEV_PM_OPS(max14577_pm, max14577_suspend, max14577_resume);
static struct i2c_driver max14577_i2c_driver = {
.driver = {
.name = "max14577",
.owner = THIS_MODULE,
.pm = &max14577_pm,
.of_match_table = of_match_ptr(max14577_dt_match),
},
.probe = max14577_i2c_probe,
.remove = max14577_i2c_remove,
.id_table = max14577_i2c_id,
};
static int __init max14577_i2c_init(void)
{
return i2c_add_driver(&max14577_i2c_driver);
}
subsys_initcall(max14577_i2c_init);
static void __exit max14577_i2c_exit(void)
{
i2c_del_driver(&max14577_i2c_driver);
}
module_exit(max14577_i2c_exit);
MODULE_AUTHOR("Chanwoo Choi <cw00.choi@samsung.com>, Krzysztof Kozlowski <k.kozlowski@samsung.com>");
MODULE_DESCRIPTION("MAXIM 14577 multi-function core driver");
MODULE_LICENSE("GPL");
/*
* max14577-private.h - Common API for the Maxim 14577 internal sub chip
*
* Copyright (C) 2013 Samsung Electrnoics
* Chanwoo Choi <cw00.choi@samsung.com>
* Krzysztof Kozlowski <k.kozlowski@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef __MAX14577_PRIVATE_H__
#define __MAX14577_PRIVATE_H__
#include <linux/i2c.h>
#include <linux/regmap.h>
#define MAX14577_REG_INVALID (0xff)
/* Slave addr = 0x4A: Interrupt */
enum max14577_reg {
MAX14577_REG_DEVICEID = 0x00,
MAX14577_REG_INT1 = 0x01,
MAX14577_REG_INT2 = 0x02,
MAX14577_REG_INT3 = 0x03,
MAX14577_REG_STATUS1 = 0x04,
MAX14577_REG_STATUS2 = 0x05,
MAX14577_REG_STATUS3 = 0x06,
MAX14577_REG_INTMASK1 = 0x07,
MAX14577_REG_INTMASK2 = 0x08,
MAX14577_REG_INTMASK3 = 0x09,
MAX14577_REG_CDETCTRL1 = 0x0A,
MAX14577_REG_RFU = 0x0B,
MAX14577_REG_CONTROL1 = 0x0C,
MAX14577_REG_CONTROL2 = 0x0D,
MAX14577_REG_CONTROL3 = 0x0E,
MAX14577_REG_CHGCTRL1 = 0x0F,
MAX14577_REG_CHGCTRL2 = 0x10,
MAX14577_REG_CHGCTRL3 = 0x11,
MAX14577_REG_CHGCTRL4 = 0x12,
MAX14577_REG_CHGCTRL5 = 0x13,
MAX14577_REG_CHGCTRL6 = 0x14,
MAX14577_REG_CHGCTRL7 = 0x15,
MAX14577_REG_END,
};
/* Slave addr = 0x4A: MUIC */
enum max14577_muic_reg {
MAX14577_MUIC_REG_STATUS1 = 0x04,
MAX14577_MUIC_REG_STATUS2 = 0x05,
MAX14577_MUIC_REG_CONTROL1 = 0x0C,
MAX14577_MUIC_REG_CONTROL3 = 0x0E,
MAX14577_MUIC_REG_END,
};
enum max14577_muic_charger_type {
MAX14577_CHARGER_TYPE_NONE = 0,
MAX14577_CHARGER_TYPE_USB,
MAX14577_CHARGER_TYPE_DOWNSTREAM_PORT,
MAX14577_CHARGER_TYPE_DEDICATED_CHG,
MAX14577_CHARGER_TYPE_SPECIAL_500MA,
MAX14577_CHARGER_TYPE_SPECIAL_1A,
MAX14577_CHARGER_TYPE_RESERVED,
MAX14577_CHARGER_TYPE_DEAD_BATTERY = 7,
};
/* MAX14577 interrupts */
#define INT1_ADC_MASK (0x1 << 0)
#define INT1_ADCLOW_MASK (0x1 << 1)
#define INT1_ADCERR_MASK (0x1 << 2)
#define INT2_CHGTYP_MASK (0x1 << 0)
#define INT2_CHGDETRUN_MASK (0x1 << 1)
#define INT2_DCDTMR_MASK (0x1 << 2)
#define INT2_DBCHG_MASK (0x1 << 3)
#define INT2_VBVOLT_MASK (0x1 << 4)
#define INT3_EOC_MASK (0x1 << 0)
#define INT3_CGMBC_MASK (0x1 << 1)
#define INT3_OVP_MASK (0x1 << 2)
#define INT3_MBCCHGERR_MASK (0x1 << 3)
/* MAX14577 DEVICE ID register */
#define DEVID_VENDORID_SHIFT 0
#define DEVID_DEVICEID_SHIFT 3
#define DEVID_VENDORID_MASK (0x07 << DEVID_VENDORID_SHIFT)
#define DEVID_DEVICEID_MASK (0x1f << DEVID_DEVICEID_SHIFT)
/* MAX14577 STATUS1 register */
#define STATUS1_ADC_SHIFT 0
#define STATUS1_ADCLOW_SHIFT 5
#define STATUS1_ADCERR_SHIFT 6
#define STATUS1_ADC_MASK (0x1f << STATUS1_ADC_SHIFT)
#define STATUS1_ADCLOW_MASK (0x1 << STATUS1_ADCLOW_SHIFT)
#define STATUS1_ADCERR_MASK (0x1 << STATUS1_ADCERR_SHIFT)
/* MAX14577 STATUS2 register */
#define STATUS2_CHGTYP_SHIFT 0
#define STATUS2_CHGDETRUN_SHIFT 3
#define STATUS2_DCDTMR_SHIFT 4
#define STATUS2_DBCHG_SHIFT 5
#define STATUS2_VBVOLT_SHIFT 6
#define STATUS2_CHGTYP_MASK (0x7 << STATUS2_CHGTYP_SHIFT)
#define STATUS2_CHGDETRUN_MASK (0x1 << STATUS2_CHGDETRUN_SHIFT)
#define STATUS2_DCDTMR_MASK (0x1 << STATUS2_DCDTMR_SHIFT)
#define STATUS2_DBCHG_MASK (0x1 << STATUS2_DBCHG_SHIFT)
#define STATUS2_VBVOLT_MASK (0x1 << STATUS2_VBVOLT_SHIFT)
/* MAX14577 CONTROL1 register */
#define COMN1SW_SHIFT 0
#define COMP2SW_SHIFT 3
#define MICEN_SHIFT 6
#define IDBEN_SHIFT 7
#define COMN1SW_MASK (0x7 << COMN1SW_SHIFT)
#define COMP2SW_MASK (0x7 << COMP2SW_SHIFT)
#define MICEN_MASK (0x1 << MICEN_SHIFT)
#define IDBEN_MASK (0x1 << IDBEN_SHIFT)
#define CLEAR_IDBEN_MICEN_MASK (COMN1SW_MASK | COMP2SW_MASK)
#define CTRL1_SW_USB ((1 << COMP2SW_SHIFT) \
| (1 << COMN1SW_SHIFT))
#define CTRL1_SW_AUDIO ((2 << COMP2SW_SHIFT) \
| (2 << COMN1SW_SHIFT))
#define CTRL1_SW_UART ((3 << COMP2SW_SHIFT) \
| (3 << COMN1SW_SHIFT))
#define CTRL1_SW_OPEN ((0 << COMP2SW_SHIFT) \
| (0 << COMN1SW_SHIFT))
/* MAX14577 CONTROL2 register */
#define CTRL2_LOWPWR_SHIFT (0)
#define CTRL2_ADCEN_SHIFT (1)
#define CTRL2_CPEN_SHIFT (2)
#define CTRL2_SFOUTASRT_SHIFT (3)
#define CTRL2_SFOUTORD_SHIFT (4)
#define CTRL2_ACCDET_SHIFT (5)
#define CTRL2_USBCPINT_SHIFT (6)
#define CTRL2_RCPS_SHIFT (7)
#define CTRL2_LOWPWR_MASK (0x1 << CTRL2_LOWPWR_SHIFT)
#define CTRL2_ADCEN_MASK (0x1 << CTRL2_ADCEN_SHIFT)
#define CTRL2_CPEN_MASK (0x1 << CTRL2_CPEN_SHIFT)
#define CTRL2_SFOUTASRT_MASK (0x1 << CTRL2_SFOUTASRT_SHIFT)
#define CTRL2_SFOUTORD_MASK (0x1 << CTRL2_SFOUTORD_SHIFT)
#define CTRL2_ACCDET_MASK (0x1 << CTRL2_ACCDET_SHIFT)
#define CTRL2_USBCPINT_MASK (0x1 << CTRL2_USBCPINT_SHIFT)
#define CTRL2_RCPS_MASK (0x1 << CTR2_RCPS_SHIFT)
#define CTRL2_CPEN1_LOWPWR0 ((1 << CTRL2_CPEN_SHIFT) | \
(0 << CTRL2_LOWPWR_SHIFT))
#define CTRL2_CPEN0_LOWPWR1 ((0 << CTRL2_CPEN_SHIFT) | \
(1 << CTRL2_LOWPWR_SHIFT))
/* MAX14577 CONTROL3 register */
#define CTRL3_JIGSET_SHIFT 0
#define CTRL3_BOOTSET_SHIFT 2
#define CTRL3_ADCDBSET_SHIFT 4
#define CTRL3_JIGSET_MASK (0x3 << CTRL3_JIGSET_SHIFT)
#define CTRL3_BOOTSET_MASK (0x3 << CTRL3_BOOTSET_SHIFT)
#define CTRL3_ADCDBSET_MASK (0x3 << CTRL3_ADCDBSET_SHIFT)
/* Slave addr = 0x4A: Charger */
enum max14577_charger_reg {
MAX14577_CHG_REG_STATUS3 = 0x06,
MAX14577_CHG_REG_CHG_CTRL1 = 0x0F,
MAX14577_CHG_REG_CHG_CTRL2 = 0x10,
MAX14577_CHG_REG_CHG_CTRL3 = 0x11,
MAX14577_CHG_REG_CHG_CTRL4 = 0x12,
MAX14577_CHG_REG_CHG_CTRL5 = 0x13,
MAX14577_CHG_REG_CHG_CTRL6 = 0x14,
MAX14577_CHG_REG_CHG_CTRL7 = 0x15,
MAX14577_CHG_REG_END,
};
/* MAX14577 STATUS3 register */
#define STATUS3_EOC_SHIFT 0
#define STATUS3_CGMBC_SHIFT 1
#define STATUS3_OVP_SHIFT 2
#define STATUS3_MBCCHGERR_SHIFT 3
#define STATUS3_EOC_MASK (0x1 << STATUS3_EOC_SHIFT)
#define STATUS3_CGMBC_MASK (0x1 << STATUS3_CGMBC_SHIFT)
#define STATUS3_OVP_MASK (0x1 << STATUS3_OVP_SHIFT)
#define STATUS3_MBCCHGERR_MASK (0x1 << STATUS3_MBCCHGERR_SHIFT)
/* MAX14577 CDETCTRL1 register */
#define CDETCTRL1_CHGDETEN_SHIFT 0
#define CDETCTRL1_CHGTYPMAN_SHIFT 1
#define CDETCTRL1_DCDEN_SHIFT 2
#define CDETCTRL1_DCD2SCT_SHIFT 3
#define CDETCTRL1_DCHKTM_SHIFT 4
#define CDETCTRL1_DBEXIT_SHIFT 5
#define CDETCTRL1_DBIDLE_SHIFT 6
#define CDETCTRL1_CDPDET_SHIFT 7
#define CDETCTRL1_CHGDETEN_MASK (0x1 << CDETCTRL1_CHGDETEN_SHIFT)
#define CDETCTRL1_CHGTYPMAN_MASK (0x1 << CDETCTRL1_CHGTYPMAN_SHIFT)
#define CDETCTRL1_DCDEN_MASK (0x1 << CDETCTRL1_DCDEN_SHIFT)
#define CDETCTRL1_DCD2SCT_MASK (0x1 << CDETCTRL1_DCD2SCT_SHIFT)
#define CDETCTRL1_DCHKTM_MASK (0x1 << CDETCTRL1_DCHKTM_SHIFT)
#define CDETCTRL1_DBEXIT_MASK (0x1 << CDETCTRL1_DBEXIT_SHIFT)
#define CDETCTRL1_DBIDLE_MASK (0x1 << CDETCTRL1_DBIDLE_SHIFT)
#define CDETCTRL1_CDPDET_MASK (0x1 << CDETCTRL1_CDPDET_SHIFT)
/* MAX14577 CHGCTRL1 register */
#define CHGCTRL1_TCHW_SHIFT 4
#define CHGCTRL1_TCHW_MASK (0x7 << CHGCTRL1_TCHW_SHIFT)
/* MAX14577 CHGCTRL2 register */
#define CHGCTRL2_MBCHOSTEN_SHIFT 6
#define CHGCTRL2_MBCHOSTEN_MASK (0x1 << CHGCTRL2_MBCHOSTEN_SHIFT)
#define CHGCTRL2_VCHGR_RC_SHIFT 7
#define CHGCTRL2_VCHGR_RC_MASK (0x1 << CHGCTRL2_VCHGR_RC_SHIFT)
/* MAX14577 CHGCTRL3 register */
#define CHGCTRL3_MBCCVWRC_SHIFT 0
#define CHGCTRL3_MBCCVWRC_MASK (0xf << CHGCTRL3_MBCCVWRC_SHIFT)
/* MAX14577 CHGCTRL4 register */
#define CHGCTRL4_MBCICHWRCH_SHIFT 0
#define CHGCTRL4_MBCICHWRCH_MASK (0xf << CHGCTRL4_MBCICHWRCH_SHIFT)
#define CHGCTRL4_MBCICHWRCL_SHIFT 4
#define CHGCTRL4_MBCICHWRCL_MASK (0x1 << CHGCTRL4_MBCICHWRCL_SHIFT)
/* MAX14577 CHGCTRL5 register */
#define CHGCTRL5_EOCS_SHIFT 0
#define CHGCTRL5_EOCS_MASK (0xf << CHGCTRL5_EOCS_SHIFT)
/* MAX14577 CHGCTRL6 register */
#define CHGCTRL6_AUTOSTOP_SHIFT 5
#define CHGCTRL6_AUTOSTOP_MASK (0x1 << CHGCTRL6_AUTOSTOP_SHIFT)
/* MAX14577 CHGCTRL7 register */
#define CHGCTRL7_OTPCGHCVS_SHIFT 0
#define CHGCTRL7_OTPCGHCVS_MASK (0x3 << CHGCTRL7_OTPCGHCVS_SHIFT)
/* MAX14577 regulator current limits (as in CHGCTRL4 register), uA */
#define MAX14577_REGULATOR_CURRENT_LIMIT_MIN 90000
#define MAX14577_REGULATOR_CURRENT_LIMIT_HIGH_START 200000
#define MAX14577_REGULATOR_CURRENT_LIMIT_HIGH_STEP 50000
#define MAX14577_REGULATOR_CURRENT_LIMIT_MAX 950000
/* MAX14577 regulator SFOUT LDO voltage, fixed, uV */
#define MAX14577_REGULATOR_SAFEOUT_VOLTAGE 4900000
enum max14577_irq_source {
MAX14577_IRQ_INT1 = 0,
MAX14577_IRQ_INT2,
MAX14577_IRQ_INT3,
MAX14577_IRQ_REGS_NUM,
};
enum max14577_irq {
/* INT1 */
MAX14577_IRQ_INT1_ADC,
MAX14577_IRQ_INT1_ADCLOW,
MAX14577_IRQ_INT1_ADCERR,
/* INT2 */
MAX14577_IRQ_INT2_CHGTYP,
MAX14577_IRQ_INT2_CHGDETRUN,
MAX14577_IRQ_INT2_DCDTMR,
MAX14577_IRQ_INT2_DBCHG,
MAX14577_IRQ_INT2_VBVOLT,
/* INT3 */
MAX14577_IRQ_INT3_EOC,
MAX14577_IRQ_INT3_CGMBC,
MAX14577_IRQ_INT3_OVP,
MAX14577_IRQ_INT3_MBCCHGERR,
MAX14577_IRQ_NUM,
};
struct max14577 {
struct device *dev;
struct i2c_client *i2c; /* Slave addr = 0x4A */
struct regmap *regmap;
struct regmap_irq_chip_data *irq_data;
int irq;
/* Device ID */
u8 vendor_id; /* Vendor Identification */
u8 device_id; /* Chip Version */
};
/* MAX14577 shared regmap API function */
static inline int max14577_read_reg(struct regmap *map, u8 reg, u8 *dest)
{
unsigned int val;
int ret;
ret = regmap_read(map, reg, &val);
*dest = val;
return ret;
}
static inline int max14577_bulk_read(struct regmap *map, u8 reg, u8 *buf,
int count)
{
return regmap_bulk_read(map, reg, buf, count);
}
static inline int max14577_write_reg(struct regmap *map, u8 reg, u8 value)
{
return regmap_write(map, reg, value);
}
static inline int max14577_bulk_write(struct regmap *map, u8 reg, u8 *buf,
int count)
{
return regmap_bulk_write(map, reg, buf, count);
}
static inline int max14577_update_reg(struct regmap *map, u8 reg, u8 mask,
u8 val)
{
return regmap_update_bits(map, reg, mask, val);
}
#endif /* __MAX14577_PRIVATE_H__ */
/*
* max14577.h - Driver for the Maxim 14577
*
* Copyright (C) 2013 Samsung Electrnoics
* Chanwoo Choi <cw00.choi@samsung.com>
* Krzysztof Kozlowski <k.kozlowski@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* This driver is based on max8997.h
*
* MAX14577 has MUIC, Charger devices.
* The devices share the same I2C bus and interrupt line
* included in this mfd driver.
*/
#ifndef __MAX14577_H__
#define __MAX14577_H__
#include <linux/mfd/max14577-private.h>
#include <linux/regulator/consumer.h>
/*
* MAX14577 Regulator
*/
/* MAX14577 regulator IDs */
enum max14577_regulators {
MAX14577_SAFEOUT = 0,
MAX14577_CHARGER,
MAX14577_REG_MAX,
};
struct max14577_regulator_platform_data {
int id;
struct regulator_init_data *initdata;
struct device_node *of_node;
};
/*
* MAX14577 MFD platform data
*/
struct max14577_platform_data {
/* IRQ */
int irq_base;
/* current control GPIOs */
int gpio_pogo_vbatt_en;
int gpio_pogo_vbus_en;
/* current control GPIO control function */
int (*set_gpio_pogo_vbatt_en) (int gpio_val);
int (*set_gpio_pogo_vbus_en) (int gpio_val);
int (*set_gpio_pogo_cb) (int new_dev);
struct max14577_regulator_platform_data *regulators;
};
#endif /* __MAX14577_H__ */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment