MIPS: Set `si_code' for SIGFPE signals sent from emulation too

Rework `process_fpemu_return' and move IEEE 754 exception interpretation
there, from `do_fpe'.  Record the cause bits set in FCSR before they are
cleared and pass them through to `process_fpemu_return' so as to set
`si_code' correctly too for SIGFPE signals sent from emulation rather
than those issued by hardware with the FPE processor exception only.

For simplicity `mipsr2_decoder' assumes `*fcr31' has been preinitialised
and only sets it to anything if an FPU instruction has been emulated,
which in turn is the only case SIGFPE can be issued for here.
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9705/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

arch/mips/include/asm/fpu_emulator.h

@@ -66,7 +66,8 @@ extern int do_dsemulret(struct pt_regs *xcp);
 extern int fpu_emulator_cop1Handler(struct pt_regs *xcp,
 				    struct mips_fpu_struct *ctx, int has_fpu,
 				    void *__user *fault_addr);
-int process_fpemu_return(int sig, void __user *fault_addr);
+int process_fpemu_return(int sig, void __user *fault_addr,
+			 unsigned long fcr31);
 int mm_isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn,
 		     unsigned long *contpc);
 

arch/mips/include/asm/mips-r2-to-r6-emul.h

@@ -84,11 +84,16 @@ extern void do_trap_or_bp(struct pt_regs *regs, unsigned int code,
 
 #ifndef CONFIG_MIPSR2_TO_R6_EMULATOR
 static int mipsr2_emulation;
-static inline int mipsr2_decoder(struct pt_regs *regs, u32 inst) { return 0; };
+static inline int mipsr2_decoder(struct pt_regs *regs, u32 inst,
+				 unsigned long *fcr31)
+{
+	return 0;
+};
 #else
 /* MIPS R2 Emulator ON/OFF */
 extern int mipsr2_emulation;
-extern int mipsr2_decoder(struct pt_regs *regs, u32 inst);
+extern int mipsr2_decoder(struct pt_regs *regs, u32 inst,
+			  unsigned long *fcr31);
 #endif /* CONFIG_MIPSR2_TO_R6_EMULATOR */
 
 #define NO_R6EMU	(cpu_has_mips_r6 && !mipsr2_emulation)

arch/mips/kernel/mips-r2-to-r6-emul.c

@@ -898,8 +898,9 @@ static inline int mipsr2_find_op_func(struct pt_regs *regs, u32 inst,
  * mipsr2_decoder: Decode and emulate a MIPS R2 instruction
  * @regs: Process register set
  * @inst: Instruction to decode and emulate
+ * @fcr31: Floating Point Control and Status Register returned
  */
-int mipsr2_decoder(struct pt_regs *regs, u32 inst)
+int mipsr2_decoder(struct pt_regs *regs, u32 inst, unsigned long *fcr31)
 {
 	int err = 0;
 	unsigned long vaddr;
@@ -1168,6 +1169,7 @@ int mipsr2_decoder(struct pt_regs *regs, u32 inst)
 
 		err = fpu_emulator_cop1Handler(regs, &current->thread.fpu, 0,
 					       &fault_addr);
+		*fcr31 = current->thread.fpu.fcr31;
 
 		/*
 		 * We can't allow the emulated instruction to leave any of

arch/mips/kernel/traps.c

@@ -700,29 +700,60 @@ asmlinkage void do_ov(struct pt_regs *regs)
 	exception_exit(prev_state);
 }
 
-int process_fpemu_return(int sig, void __user *fault_addr)
+int process_fpemu_return(int sig, void __user *fault_addr, unsigned long fcr31)
 {
-	if (sig == SIGSEGV || sig == SIGBUS) {
-		struct siginfo si = {0};
+	struct siginfo si = { 0 };
+
+	switch (sig) {
+	case 0:
+		return 0;
+
+	case SIGFPE:
+		si.si_addr = fault_addr;
+		si.si_signo = sig;
+		/*
+		 * Inexact can happen together with Overflow or Underflow.
+		 * Respect the mask to deliver the correct exception.
+		 */
+		fcr31 &= (fcr31 & FPU_CSR_ALL_E) <<
+			 (ffs(FPU_CSR_ALL_X) - ffs(FPU_CSR_ALL_E));
+		if (fcr31 & FPU_CSR_INV_X)
+			si.si_code = FPE_FLTINV;
+		else if (fcr31 & FPU_CSR_DIV_X)
+			si.si_code = FPE_FLTDIV;
+		else if (fcr31 & FPU_CSR_OVF_X)
+			si.si_code = FPE_FLTOVF;
+		else if (fcr31 & FPU_CSR_UDF_X)
+			si.si_code = FPE_FLTUND;
+		else if (fcr31 & FPU_CSR_INE_X)
+			si.si_code = FPE_FLTRES;
+		else
+			si.si_code = __SI_FAULT;
+		force_sig_info(sig, &si, current);
+		return 1;
+
+	case SIGBUS:
+		si.si_addr = fault_addr;
+		si.si_signo = sig;
+		si.si_code = BUS_ADRERR;
+		force_sig_info(sig, &si, current);
+		return 1;
+
+	case SIGSEGV:
 		si.si_addr = fault_addr;
 		si.si_signo = sig;
-		if (sig == SIGSEGV) {
 		down_read(&current->mm->mmap_sem);
 		if (find_vma(current->mm, (unsigned long)fault_addr))
 			si.si_code = SEGV_ACCERR;
 		else
 			si.si_code = SEGV_MAPERR;
 		up_read(&current->mm->mmap_sem);
-		} else {
-			si.si_code = BUS_ADRERR;
-		}
 		force_sig_info(sig, &si, current);
 		return 1;
-	} else if (sig) {
+
+	default:
 		force_sig(sig, current);
 		return 1;
-	} else {
-		return 0;
 	}
 }
 
@@ -730,7 +761,8 @@ static int simulate_fp(struct pt_regs *regs, unsigned int opcode,
 		       unsigned long old_epc, unsigned long old_ra)
 {
 	union mips_instruction inst = { .word = opcode };
-	void __user *fault_addr = NULL;
+	void __user *fault_addr;
+	unsigned long fcr31;
 	int sig;
 
 	/* If it's obviously not an FP instruction, skip it */
@@ -760,6 +792,7 @@ static int simulate_fp(struct pt_regs *regs, unsigned int opcode,
 	/* Run the emulator */
 	sig = fpu_emulator_cop1Handler(regs, &current->thread.fpu, 1,
 				       &fault_addr);
+	fcr31 = current->thread.fpu.fcr31;
 
 	/*
 	 * We can't allow the emulated instruction to leave any of
@@ -767,12 +800,12 @@ static int simulate_fp(struct pt_regs *regs, unsigned int opcode,
 	 */
 	current->thread.fpu.fcr31 &= ~FPU_CSR_ALL_X;
 
-	/* If something went wrong, signal */
-	process_fpemu_return(sig, fault_addr);
-
 	/* Restore the hardware register state */
 	own_fpu(1);
 
+	/* Send a signal if required.  */
+	process_fpemu_return(sig, fault_addr, fcr31);
+
 	return 0;
 }
 
@@ -782,7 +815,8 @@ static int simulate_fp(struct pt_regs *regs, unsigned int opcode,
 asmlinkage void do_fpe(struct pt_regs *regs, unsigned long fcr31)
 {
 	enum ctx_state prev_state;
-	siginfo_t info = {0};
+	void __user *fault_addr;
+	int sig;
 
 	prev_state = exception_enter();
 	if (notify_die(DIE_FP, "FP exception", regs, 0, regs_to_trapnr(regs),
@@ -791,9 +825,6 @@ asmlinkage void do_fpe(struct pt_regs *regs, unsigned long fcr31)
 	die_if_kernel("FP exception in kernel code", regs);
 
 	if (fcr31 & FPU_CSR_UNI_X) {
-		int sig;
-		void __user *fault_addr = NULL;
-
 		/*
 		 * Unimplemented operation exception.  If we've got the full
 		 * software emulator on-board, let's use it...
@@ -810,6 +841,7 @@ asmlinkage void do_fpe(struct pt_regs *regs, unsigned long fcr31)
 		/* Run the emulator */
 		sig = fpu_emulator_cop1Handler(regs, &current->thread.fpu, 1,
 					       &fault_addr);
+		fcr31 = current->thread.fpu.fcr31;
 
 		/*
 		 * We can't allow the emulated instruction to leave any of
@@ -819,35 +851,13 @@ asmlinkage void do_fpe(struct pt_regs *regs, unsigned long fcr31)
 
 		/* Restore the hardware register state */
 		own_fpu(1);	/* Using the FPU again.	 */
-
-		/* If something went wrong, signal */
-		process_fpemu_return(sig, fault_addr);
-
-		goto out;
+	} else {
+		sig = SIGFPE;
+		fault_addr = (void __user *) regs->cp0_epc;
 	}
 
-	/*
-	 * Inexact can happen together with Overflow or Underflow.
-	 * Respect the mask to deliver the correct exception.
-	 */
-	fcr31 &= (fcr31 & FPU_CSR_ALL_E) <<
-		 (ffs(FPU_CSR_ALL_X) - ffs(FPU_CSR_ALL_E));
-	if (fcr31 & FPU_CSR_INV_X)
-		info.si_code = FPE_FLTINV;
-	else if (fcr31 & FPU_CSR_DIV_X)
-		info.si_code = FPE_FLTDIV;
-	else if (fcr31 & FPU_CSR_OVF_X)
-		info.si_code = FPE_FLTOVF;
-	else if (fcr31 & FPU_CSR_UDF_X)
-		info.si_code = FPE_FLTUND;
-	else if (fcr31 & FPU_CSR_INE_X)
-		info.si_code = FPE_FLTRES;
-	else
-		info.si_code = __SI_FAULT;
-	info.si_signo = SIGFPE;
-	info.si_errno = 0;
-	info.si_addr = (void __user *) regs->cp0_epc;
-	force_sig_info(SIGFPE, &info, current);
+	/* Send a signal if required.  */
+	process_fpemu_return(sig, fault_addr, fcr31);
 
 out:
 	exception_exit(prev_state);
@@ -1050,7 +1060,9 @@ asmlinkage void do_ri(struct pt_regs *regs)
 	if (mipsr2_emulation && cpu_has_mips_r6 &&
 	    likely(user_mode(regs)) &&
 	    likely(get_user(opcode, epc) >= 0)) {
-		status = mipsr2_decoder(regs, opcode);
+		unsigned long fcr31 = 0;
+
+		status = mipsr2_decoder(regs, opcode, &fcr31);
 		switch (status) {
 		case 0:
 		case SIGEMT:
@@ -1060,7 +1072,8 @@ asmlinkage void do_ri(struct pt_regs *regs)
 			goto no_r2_instr;
 		default:
 			process_fpemu_return(status,
-					     &current->thread.cp0_baduaddr);
+					     &current->thread.cp0_baduaddr,
+					     fcr31);
 			task_thread_info(current)->r2_emul_return = 1;
 			return;
 		}
@@ -1307,10 +1320,13 @@ asmlinkage void do_cpu(struct pt_regs *regs)
 	enum ctx_state prev_state;
 	unsigned int __user *epc;
 	unsigned long old_epc, old31;
+	void __user *fault_addr;
 	unsigned int opcode;
+	unsigned long fcr31;
 	unsigned int cpid;
 	int status, err;
 	unsigned long __maybe_unused flags;
+	int sig;
 
 	prev_state = exception_enter();
 	cpid = (regs->cp0_cause >> CAUSEB_CE) & 3;
@@ -1384,12 +1400,12 @@ asmlinkage void do_cpu(struct pt_regs *regs)
 	case 1:
 		err = enable_restore_fp_context(0);
 
-		if (!raw_cpu_has_fpu || err) {
-			int sig;
-			void __user *fault_addr = NULL;
-			sig = fpu_emulator_cop1Handler(regs,
-						       &current->thread.fpu,
-						       0, &fault_addr);
+		if (raw_cpu_has_fpu && !err)
+			break;
+
+		sig = fpu_emulator_cop1Handler(regs, &current->thread.fpu, 0,
+					       &fault_addr);
+		fcr31 = current->thread.fpu.fcr31;
 
 		/*
 		 * We can't allow the emulated instruction to leave
@@ -1397,9 +1413,9 @@ asmlinkage void do_cpu(struct pt_regs *regs)
 		 */
 		current->thread.fpu.fcr31 &= ~FPU_CSR_ALL_X;
 
-			if (!process_fpemu_return(sig, fault_addr) && !err)
+		/* Send a signal if required.  */
+		if (!process_fpemu_return(sig, fault_addr, fcr31) && !err)
 			mt_ase_fp_affinity();
-		}
 
 		break;
 

arch/mips/kernel/unaligned.c

@@ -1076,7 +1076,7 @@ static void emulate_load_store_insn(struct pt_regs *regs,
 		own_fpu(1);	/* Restore FPU state. */
 
 		/* Signal if something went wrong. */
-		process_fpemu_return(res, fault_addr);
+		process_fpemu_return(res, fault_addr, 0);
 
 		if (res == 0)
 			break;
@@ -1511,7 +1511,7 @@ static void emulate_load_store_microMIPS(struct pt_regs *regs,
 		own_fpu(1);	/* restore FPU state */
 
 		/* If something went wrong, signal */
-		process_fpemu_return(res, fault_addr);
+		process_fpemu_return(res, fault_addr, 0);
 
 		if (res == 0)
 			goto success;