Commit 30ff2e87 authored by Stephen Rothwell's avatar Stephen Rothwell Committed by Paul Mackerras

[POWERPC] iSeries: Make iseries_reg_save private to iSeries

Now that we have the alpaca, the reg_save_ptr is no longer needed in the
paca.  Eradicate all global uses of it and make it static in the iSeries
lpardata.c
Signed-off-by: default avatarStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: default avatarPaul Mackerras <paulus@samba.org>
parent 3eb9cf07
......@@ -15,7 +15,6 @@
#include <asm/ptrace.h>
#include <asm/page.h>
#include <asm/lppaca.h>
#include <asm/iseries/it_lp_reg_save.h>
#include <asm/paca.h>
#include <asm/mmu.h>
......@@ -25,13 +24,13 @@
extern unsigned long __toc_start;
/*
* iSeries structure which the hypervisor knows about - this structure
* The structure which the hypervisor knows about - this structure
* should not cross a page boundary. The vpa_init/register_vpa call
* is now known to fail if the lppaca structure crosses a page
* boundary. The lppaca is also used on POWER5 pSeries boxes. The
* lppaca is 640 bytes long, and cannot readily change since the
* hypervisor knows its layout, so a 1kB alignment will suffice to
* ensure that it doesn't cross a page boundary.
* boundary. The lppaca is also used on legacy iSeries and POWER5
* pSeries boxes. The lppaca is 640 bytes long, and cannot readily
* change since the hypervisor knows its layout, so a 1kB alignment
* will suffice to ensure that it doesn't cross a page boundary.
*/
struct lppaca lppaca[] = {
[0 ... (NR_CPUS-1)] = {
......@@ -66,32 +65,16 @@ struct slb_shadow slb_shadow[] __cacheline_aligned = {
* processors. The processor VPD array needs one entry per physical
* processor (not thread).
*/
#define PACA_INIT_COMMON(number) \
#define PACA_INIT(number) \
{ \
.lppaca_ptr = &lppaca[number], \
.lock_token = 0x8000, \
.paca_index = (number), /* Paca Index */ \
.kernel_toc = (unsigned long)(&__toc_start) + 0x8000UL, \
.hw_cpu_id = 0xffff, \
.slb_shadow_ptr = &slb_shadow[number],
#ifdef CONFIG_PPC_ISERIES
#define PACA_INIT_ISERIES(number) \
.reg_save_ptr = &iseries_reg_save[number],
#define PACA_INIT(number) \
{ \
PACA_INIT_COMMON(number) \
PACA_INIT_ISERIES(number) \
.slb_shadow_ptr = &slb_shadow[number], \
}
#else
#define PACA_INIT(number) \
{ \
PACA_INIT_COMMON(number) \
}
#endif
struct paca_struct paca[] = {
PACA_INIT(0),
#if NR_CPUS > 1
......
......@@ -14,7 +14,6 @@
#include <asm/ptrace.h>
#include <asm/abs_addr.h>
#include <asm/lppaca.h>
#include <asm/iseries/it_lp_reg_save.h>
#include <asm/paca.h>
#include <asm/iseries/lpar_map.h>
#include <asm/iseries/it_lp_queue.h>
......@@ -62,6 +61,63 @@ struct naca_struct naca = {
.xRamDiskSize = 0,
};
struct ItLpRegSave {
u32 xDesc; // Eye catcher "LpRS" ebcdic 000-003
u16 xSize; // Size of this class 004-005
u8 xInUse; // Area is live 006-007
u8 xRsvd1[9]; // Reserved 007-00F
u8 xFixedRegSave[352]; // Fixed Register Save Area 010-16F
u32 xCTRL; // Control Register 170-173
u32 xDEC; // Decrementer 174-177
u32 xFPSCR; // FP Status and Control Reg 178-17B
u32 xPVR; // Processor Version Number 17C-17F
u64 xMMCR0; // Monitor Mode Control Reg 0 180-187
u32 xPMC1; // Perf Monitor Counter 1 188-18B
u32 xPMC2; // Perf Monitor Counter 2 18C-18F
u32 xPMC3; // Perf Monitor Counter 3 190-193
u32 xPMC4; // Perf Monitor Counter 4 194-197
u32 xPIR; // Processor ID Reg 198-19B
u32 xMMCR1; // Monitor Mode Control Reg 1 19C-19F
u32 xMMCRA; // Monitor Mode Control Reg A 1A0-1A3
u32 xPMC5; // Perf Monitor Counter 5 1A4-1A7
u32 xPMC6; // Perf Monitor Counter 6 1A8-1AB
u32 xPMC7; // Perf Monitor Counter 7 1AC-1AF
u32 xPMC8; // Perf Monitor Counter 8 1B0-1B3
u32 xTSC; // Thread Switch Control 1B4-1B7
u32 xTST; // Thread Switch Timeout 1B8-1BB
u32 xRsvd; // Reserved 1BC-1BF
u64 xACCR; // Address Compare Control Reg 1C0-1C7
u64 xIMR; // Instruction Match Register 1C8-1CF
u64 xSDR1; // Storage Description Reg 1 1D0-1D7
u64 xSPRG0; // Special Purpose Reg General0 1D8-1DF
u64 xSPRG1; // Special Purpose Reg General1 1E0-1E7
u64 xSPRG2; // Special Purpose Reg General2 1E8-1EF
u64 xSPRG3; // Special Purpose Reg General3 1F0-1F7
u64 xTB; // Time Base Register 1F8-1FF
u64 xFPR[32]; // Floating Point Registers 200-2FF
u64 xMSR; // Machine State Register 300-307
u64 xNIA; // Next Instruction Address 308-30F
u64 xDABR; // Data Address Breakpoint Reg 310-317
u64 xIABR; // Inst Address Breakpoint Reg 318-31F
u64 xHID0; // HW Implementation Dependent0 320-327
u64 xHID4; // HW Implementation Dependent4 328-32F
u64 xSCOMd; // SCON Data Reg (SPRG4) 330-337
u64 xSCOMc; // SCON Command Reg (SPRG5) 338-33F
u64 xSDAR; // Sample Data Address Register 340-347
u64 xSIAR; // Sample Inst Address Register 348-34F
u8 xRsvd3[176]; // Reserved 350-3FF
};
extern void system_reset_iSeries(void);
extern void machine_check_iSeries(void);
extern void data_access_iSeries(void);
......@@ -160,6 +216,13 @@ struct SpCommArea xSpCommArea = {
.xFormat = 1,
};
static struct ItLpRegSave iseries_reg_save[] = {
[0 ... (NR_CPUS-1)] = {
.xDesc = 0xd397d9e2, /* "LpRS" */
.xSize = sizeof(struct ItLpRegSave),
},
};
#define ALPACA_INIT(number) \
{ \
.lppaca_ptr = &lppaca[number], \
......@@ -254,10 +317,3 @@ struct ItVpdAreas itVpdAreas = {
0,0
}
};
struct ItLpRegSave iseries_reg_save[] = {
[0 ... (NR_CPUS-1)] = {
.xDesc = 0xd397d9e2, /* "LpRS" */
.xSize = sizeof(struct ItLpRegSave),
},
};
......@@ -45,7 +45,6 @@
#ifdef CONFIG_PPC64
#include <asm/hvcall.h>
#include <asm/paca.h>
#include <asm/iseries/it_lp_reg_save.h>
#endif
#include "nonstdio.h"
......@@ -1598,7 +1597,6 @@ void super_regs(void)
if (firmware_has_feature(FW_FEATURE_ISERIES)) {
struct paca_struct *ptrPaca;
struct lppaca *ptrLpPaca;
struct ItLpRegSave *ptrLpRegSave;
/* Dump out relevant Paca data areas. */
printf("Paca: \n");
......@@ -1611,15 +1609,6 @@ void super_regs(void)
printf(" Saved Gpr3=%.16lx Saved Gpr4=%.16lx \n",
ptrLpPaca->saved_gpr3, ptrLpPaca->saved_gpr4);
printf(" Saved Gpr5=%.16lx \n", ptrLpPaca->saved_gpr5);
printf(" Local Processor Register Save Area (LpRegSave): \n");
ptrLpRegSave = ptrPaca->reg_save_ptr;
printf(" Saved Sprg0=%.16lx Saved Sprg1=%.16lx \n",
ptrLpRegSave->xSPRG0, ptrLpRegSave->xSPRG0);
printf(" Saved Sprg2=%.16lx Saved Sprg3=%.16lx \n",
ptrLpRegSave->xSPRG2, ptrLpRegSave->xSPRG3);
printf(" Saved Msr =%.16lx Saved Nia =%.16lx \n",
ptrLpRegSave->xMSR, ptrLpRegSave->xNIA);
}
#endif
......
/*
* Copyright (C) 2001 Mike Corrigan IBM Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef _ASM_POWERPC_ISERIES_IT_LP_REG_SAVE_H
#define _ASM_POWERPC_ISERIES_IT_LP_REG_SAVE_H
/*
* This control block contains the data that is shared between PLIC
* and the OS
*/
struct ItLpRegSave {
u32 xDesc; // Eye catcher "LpRS" ebcdic 000-003
u16 xSize; // Size of this class 004-005
u8 xInUse; // Area is live 006-007
u8 xRsvd1[9]; // Reserved 007-00F
u8 xFixedRegSave[352]; // Fixed Register Save Area 010-16F
u32 xCTRL; // Control Register 170-173
u32 xDEC; // Decrementer 174-177
u32 xFPSCR; // FP Status and Control Reg 178-17B
u32 xPVR; // Processor Version Number 17C-17F
u64 xMMCR0; // Monitor Mode Control Reg 0 180-187
u32 xPMC1; // Perf Monitor Counter 1 188-18B
u32 xPMC2; // Perf Monitor Counter 2 18C-18F
u32 xPMC3; // Perf Monitor Counter 3 190-193
u32 xPMC4; // Perf Monitor Counter 4 194-197
u32 xPIR; // Processor ID Reg 198-19B
u32 xMMCR1; // Monitor Mode Control Reg 1 19C-19F
u32 xMMCRA; // Monitor Mode Control Reg A 1A0-1A3
u32 xPMC5; // Perf Monitor Counter 5 1A4-1A7
u32 xPMC6; // Perf Monitor Counter 6 1A8-1AB
u32 xPMC7; // Perf Monitor Counter 7 1AC-1AF
u32 xPMC8; // Perf Monitor Counter 8 1B0-1B3
u32 xTSC; // Thread Switch Control 1B4-1B7
u32 xTST; // Thread Switch Timeout 1B8-1BB
u32 xRsvd; // Reserved 1BC-1BF
u64 xACCR; // Address Compare Control Reg 1C0-1C7
u64 xIMR; // Instruction Match Register 1C8-1CF
u64 xSDR1; // Storage Description Reg 1 1D0-1D7
u64 xSPRG0; // Special Purpose Reg General0 1D8-1DF
u64 xSPRG1; // Special Purpose Reg General1 1E0-1E7
u64 xSPRG2; // Special Purpose Reg General2 1E8-1EF
u64 xSPRG3; // Special Purpose Reg General3 1F0-1F7
u64 xTB; // Time Base Register 1F8-1FF
u64 xFPR[32]; // Floating Point Registers 200-2FF
u64 xMSR; // Machine State Register 300-307
u64 xNIA; // Next Instruction Address 308-30F
u64 xDABR; // Data Address Breakpoint Reg 310-317
u64 xIABR; // Inst Address Breakpoint Reg 318-31F
u64 xHID0; // HW Implementation Dependent0 320-327
u64 xHID4; // HW Implementation Dependent4 328-32F
u64 xSCOMd; // SCON Data Reg (SPRG4) 330-337
u64 xSCOMc; // SCON Command Reg (SPRG5) 338-33F
u64 xSDAR; // Sample Data Address Register 340-347
u64 xSIAR; // Sample Inst Address Register 348-34F
u8 xRsvd3[176]; // Reserved 350-3FF
};
extern struct ItLpRegSave iseries_reg_save[];
#endif /* _ASM_POWERPC_ISERIES_IT_LP_REG_SAVE_H */
......@@ -42,10 +42,7 @@ struct task_struct;
* Defines the layout of the paca.
*
* This structure is not directly accessed by firmware or the service
* processor except for the first two pointers that point to the
* lppaca area and the ItLpRegSave area for this CPU. The lppaca
* object is currently contained within the PACA but it doesn't need
* to be.
* processor.
*/
struct paca_struct {
/*
......@@ -55,14 +52,7 @@ struct paca_struct {
* avoid cacheline bouncing.
*/
/*
* MAGIC: These first two pointers can't be moved - they're
* accessed by the firmware
*/
struct lppaca *lppaca_ptr; /* Pointer to LpPaca for PLIC */
#ifdef CONFIG_PPC_ISERIES
void *reg_save_ptr; /* Pointer to LpRegSave for PLIC */
#endif /* CONFIG_PPC_ISERIES */
/*
* MAGIC: the spinlock functions in arch/powerpc/lib/locks.c
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment