Commit 312abe3d authored by Hangbin Liu's avatar Hangbin Liu Committed by David S. Miller

selftests/net: convert test_bridge_neigh_suppress.sh to run it in unique namespace

Here is the test result after conversion.

]# ./test_bridge_neigh_suppress.sh

Per-port ARP suppression - VLAN 10
----------------------------------
TEST: arping                                                        [ OK ]
TEST: ARP suppression                                               [ OK ]

...

TEST: NS suppression (VLAN 20)                                      [ OK ]

Tests passed: 148
Tests failed:   0
Acked-by: default avatarDavid Ahern <dsahern@kernel.org>
Signed-off-by: default avatarHangbin Liu <liuhangbin@gmail.com>
Reviewed-by: default avatarIdo Schimmel <idosch@nvidia.com>
Tested-by: default avatarIdo Schimmel <idosch@nvidia.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 4624a78c
......@@ -45,9 +45,8 @@
# | sw1 | | sw2 |
# +------------------------------------+ +------------------------------------+
source lib.sh
ret=0
# Kselftest framework requirement - SKIP code is 4.
ksft_skip=4
# All tests in this script. Can be overridden with -t option.
TESTS="
......@@ -140,9 +139,6 @@ setup_topo_ns()
{
local ns=$1; shift
ip netns add $ns
ip -n $ns link set dev lo up
ip netns exec $ns sysctl -qw net.ipv6.conf.all.keep_addr_on_down=1
ip netns exec $ns sysctl -qw net.ipv6.conf.default.ignore_routes_with_linkdown=1
ip netns exec $ns sysctl -qw net.ipv6.conf.all.accept_dad=0
......@@ -153,21 +149,22 @@ setup_topo()
{
local ns
for ns in h1 h2 sw1 sw2; do
setup_ns h1 h2 sw1 sw2
for ns in $h1 $h2 $sw1 $sw2; do
setup_topo_ns $ns
done
ip link add name veth0 type veth peer name veth1
ip link set dev veth0 netns h1 name eth0
ip link set dev veth1 netns sw1 name swp1
ip link set dev veth0 netns $h1 name eth0
ip link set dev veth1 netns $sw1 name swp1
ip link add name veth0 type veth peer name veth1
ip link set dev veth0 netns sw1 name veth0
ip link set dev veth1 netns sw2 name veth0
ip link set dev veth0 netns $sw1 name veth0
ip link set dev veth1 netns $sw2 name veth0
ip link add name veth0 type veth peer name veth1
ip link set dev veth0 netns h2 name eth0
ip link set dev veth1 netns sw2 name swp1
ip link set dev veth0 netns $h2 name eth0
ip link set dev veth1 netns $sw2 name swp1
}
setup_host_common()
......@@ -190,7 +187,7 @@ setup_host_common()
setup_h1()
{
local ns=h1
local ns=$h1
local v4addr1=192.0.2.1/28
local v4addr2=192.0.2.17/28
local v6addr1=2001:db8:1::1/64
......@@ -201,7 +198,7 @@ setup_h1()
setup_h2()
{
local ns=h2
local ns=$h2
local v4addr1=192.0.2.2/28
local v4addr2=192.0.2.18/28
local v6addr1=2001:db8:1::2/64
......@@ -254,7 +251,7 @@ setup_sw_common()
setup_sw1()
{
local ns=sw1
local ns=$sw1
local local_addr=192.0.2.33
local remote_addr=192.0.2.34
local veth_addr=192.0.2.49
......@@ -265,7 +262,7 @@ setup_sw1()
setup_sw2()
{
local ns=sw2
local ns=$sw2
local local_addr=192.0.2.34
local remote_addr=192.0.2.33
local veth_addr=192.0.2.50
......@@ -291,11 +288,7 @@ setup()
cleanup()
{
local ns
for ns in h1 h2 sw1 sw2; do
ip netns del $ns &> /dev/null
done
cleanup_ns $h1 $h2 $sw1 $sw2
}
################################################################################
......@@ -312,80 +305,80 @@ neigh_suppress_arp_common()
echo "Per-port ARP suppression - VLAN $vid"
echo "----------------------------------"
run_cmd "tc -n sw1 qdisc replace dev vx0 clsact"
run_cmd "tc -n sw1 filter replace dev vx0 egress pref 1 handle 101 proto 0x0806 flower indev swp1 arp_tip $tip arp_sip $sip arp_op request action pass"
run_cmd "tc -n $sw1 qdisc replace dev vx0 clsact"
run_cmd "tc -n $sw1 filter replace dev vx0 egress pref 1 handle 101 proto 0x0806 flower indev swp1 arp_tip $tip arp_sip $sip arp_op request action pass"
# Initial state - check that ARP requests are not suppressed and that
# ARP replies are received.
run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip -I eth0.$vid $tip"
run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip -I eth0.$vid $tip"
log_test $? 0 "arping"
tc_check_packets sw1 "dev vx0 egress" 101 1
tc_check_packets $sw1 "dev vx0 egress" 101 1
log_test $? 0 "ARP suppression"
# Enable neighbor suppression and check that nothing changes compared
# to the initial state.
run_cmd "bridge -n sw1 link set dev vx0 neigh_suppress on"
run_cmd "bridge -n sw1 -d link show dev vx0 | grep \"neigh_suppress on\""
run_cmd "bridge -n $sw1 link set dev vx0 neigh_suppress on"
run_cmd "bridge -n $sw1 -d link show dev vx0 | grep \"neigh_suppress on\""
log_test $? 0 "\"neigh_suppress\" is on"
run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip -I eth0.$vid $tip"
run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip -I eth0.$vid $tip"
log_test $? 0 "arping"
tc_check_packets sw1 "dev vx0 egress" 101 2
tc_check_packets $sw1 "dev vx0 egress" 101 2
log_test $? 0 "ARP suppression"
# Install an FDB entry for the remote host and check that nothing
# changes compared to the initial state.
h2_mac=$(ip -n h2 -j -p link show eth0.$vid | jq -r '.[]["address"]')
run_cmd "bridge -n sw1 fdb replace $h2_mac dev vx0 master static vlan $vid"
h2_mac=$(ip -n $h2 -j -p link show eth0.$vid | jq -r '.[]["address"]')
run_cmd "bridge -n $sw1 fdb replace $h2_mac dev vx0 master static vlan $vid"
log_test $? 0 "FDB entry installation"
run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip -I eth0.$vid $tip"
run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip -I eth0.$vid $tip"
log_test $? 0 "arping"
tc_check_packets sw1 "dev vx0 egress" 101 3
tc_check_packets $sw1 "dev vx0 egress" 101 3
log_test $? 0 "ARP suppression"
# Install a neighbor on the matching SVI interface and check that ARP
# requests are suppressed.
run_cmd "ip -n sw1 neigh replace $tip lladdr $h2_mac nud permanent dev br0.$vid"
run_cmd "ip -n $sw1 neigh replace $tip lladdr $h2_mac nud permanent dev br0.$vid"
log_test $? 0 "Neighbor entry installation"
run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip -I eth0.$vid $tip"
run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip -I eth0.$vid $tip"
log_test $? 0 "arping"
tc_check_packets sw1 "dev vx0 egress" 101 3
tc_check_packets $sw1 "dev vx0 egress" 101 3
log_test $? 0 "ARP suppression"
# Take the second host down and check that ARP requests are suppressed
# and that ARP replies are received.
run_cmd "ip -n h2 link set dev eth0.$vid down"
run_cmd "ip -n $h2 link set dev eth0.$vid down"
log_test $? 0 "H2 down"
run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip -I eth0.$vid $tip"
run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip -I eth0.$vid $tip"
log_test $? 0 "arping"
tc_check_packets sw1 "dev vx0 egress" 101 3
tc_check_packets $sw1 "dev vx0 egress" 101 3
log_test $? 0 "ARP suppression"
run_cmd "ip -n h2 link set dev eth0.$vid up"
run_cmd "ip -n $h2 link set dev eth0.$vid up"
log_test $? 0 "H2 up"
# Disable neighbor suppression and check that ARP requests are no
# longer suppressed.
run_cmd "bridge -n sw1 link set dev vx0 neigh_suppress off"
run_cmd "bridge -n sw1 -d link show dev vx0 | grep \"neigh_suppress off\""
run_cmd "bridge -n $sw1 link set dev vx0 neigh_suppress off"
run_cmd "bridge -n $sw1 -d link show dev vx0 | grep \"neigh_suppress off\""
log_test $? 0 "\"neigh_suppress\" is off"
run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip -I eth0.$vid $tip"
run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip -I eth0.$vid $tip"
log_test $? 0 "arping"
tc_check_packets sw1 "dev vx0 egress" 101 4
tc_check_packets $sw1 "dev vx0 egress" 101 4
log_test $? 0 "ARP suppression"
# Take the second host down and check that ARP requests are not
# suppressed and that ARP replies are not received.
run_cmd "ip -n h2 link set dev eth0.$vid down"
run_cmd "ip -n $h2 link set dev eth0.$vid down"
log_test $? 0 "H2 down"
run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip -I eth0.$vid $tip"
run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip -I eth0.$vid $tip"
log_test $? 1 "arping"
tc_check_packets sw1 "dev vx0 egress" 101 5
tc_check_packets $sw1 "dev vx0 egress" 101 5
log_test $? 0 "ARP suppression"
}
......@@ -415,80 +408,80 @@ neigh_suppress_ns_common()
echo "Per-port NS suppression - VLAN $vid"
echo "---------------------------------"
run_cmd "tc -n sw1 qdisc replace dev vx0 clsact"
run_cmd "tc -n sw1 filter replace dev vx0 egress pref 1 handle 101 proto ipv6 flower indev swp1 ip_proto icmpv6 dst_ip $maddr src_ip $saddr type 135 code 0 action pass"
run_cmd "tc -n $sw1 qdisc replace dev vx0 clsact"
run_cmd "tc -n $sw1 filter replace dev vx0 egress pref 1 handle 101 proto ipv6 flower indev swp1 ip_proto icmpv6 dst_ip $maddr src_ip $saddr type 135 code 0 action pass"
# Initial state - check that NS messages are not suppressed and that ND
# messages are received.
run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr -w 5000 $daddr eth0.$vid"
run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr -w 5000 $daddr eth0.$vid"
log_test $? 0 "ndisc6"
tc_check_packets sw1 "dev vx0 egress" 101 1
tc_check_packets $sw1 "dev vx0 egress" 101 1
log_test $? 0 "NS suppression"
# Enable neighbor suppression and check that nothing changes compared
# to the initial state.
run_cmd "bridge -n sw1 link set dev vx0 neigh_suppress on"
run_cmd "bridge -n sw1 -d link show dev vx0 | grep \"neigh_suppress on\""
run_cmd "bridge -n $sw1 link set dev vx0 neigh_suppress on"
run_cmd "bridge -n $sw1 -d link show dev vx0 | grep \"neigh_suppress on\""
log_test $? 0 "\"neigh_suppress\" is on"
run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr -w 5000 $daddr eth0.$vid"
run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr -w 5000 $daddr eth0.$vid"
log_test $? 0 "ndisc6"
tc_check_packets sw1 "dev vx0 egress" 101 2
tc_check_packets $sw1 "dev vx0 egress" 101 2
log_test $? 0 "NS suppression"
# Install an FDB entry for the remote host and check that nothing
# changes compared to the initial state.
h2_mac=$(ip -n h2 -j -p link show eth0.$vid | jq -r '.[]["address"]')
run_cmd "bridge -n sw1 fdb replace $h2_mac dev vx0 master static vlan $vid"
h2_mac=$(ip -n $h2 -j -p link show eth0.$vid | jq -r '.[]["address"]')
run_cmd "bridge -n $sw1 fdb replace $h2_mac dev vx0 master static vlan $vid"
log_test $? 0 "FDB entry installation"
run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr -w 5000 $daddr eth0.$vid"
run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr -w 5000 $daddr eth0.$vid"
log_test $? 0 "ndisc6"
tc_check_packets sw1 "dev vx0 egress" 101 3
tc_check_packets $sw1 "dev vx0 egress" 101 3
log_test $? 0 "NS suppression"
# Install a neighbor on the matching SVI interface and check that NS
# messages are suppressed.
run_cmd "ip -n sw1 neigh replace $daddr lladdr $h2_mac nud permanent dev br0.$vid"
run_cmd "ip -n $sw1 neigh replace $daddr lladdr $h2_mac nud permanent dev br0.$vid"
log_test $? 0 "Neighbor entry installation"
run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr -w 5000 $daddr eth0.$vid"
run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr -w 5000 $daddr eth0.$vid"
log_test $? 0 "ndisc6"
tc_check_packets sw1 "dev vx0 egress" 101 3
tc_check_packets $sw1 "dev vx0 egress" 101 3
log_test $? 0 "NS suppression"
# Take the second host down and check that NS messages are suppressed
# and that ND messages are received.
run_cmd "ip -n h2 link set dev eth0.$vid down"
run_cmd "ip -n $h2 link set dev eth0.$vid down"
log_test $? 0 "H2 down"
run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr -w 5000 $daddr eth0.$vid"
run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr -w 5000 $daddr eth0.$vid"
log_test $? 0 "ndisc6"
tc_check_packets sw1 "dev vx0 egress" 101 3
tc_check_packets $sw1 "dev vx0 egress" 101 3
log_test $? 0 "NS suppression"
run_cmd "ip -n h2 link set dev eth0.$vid up"
run_cmd "ip -n $h2 link set dev eth0.$vid up"
log_test $? 0 "H2 up"
# Disable neighbor suppression and check that NS messages are no longer
# suppressed.
run_cmd "bridge -n sw1 link set dev vx0 neigh_suppress off"
run_cmd "bridge -n sw1 -d link show dev vx0 | grep \"neigh_suppress off\""
run_cmd "bridge -n $sw1 link set dev vx0 neigh_suppress off"
run_cmd "bridge -n $sw1 -d link show dev vx0 | grep \"neigh_suppress off\""
log_test $? 0 "\"neigh_suppress\" is off"
run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr -w 5000 $daddr eth0.$vid"
run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr -w 5000 $daddr eth0.$vid"
log_test $? 0 "ndisc6"
tc_check_packets sw1 "dev vx0 egress" 101 4
tc_check_packets $sw1 "dev vx0 egress" 101 4
log_test $? 0 "NS suppression"
# Take the second host down and check that NS messages are not
# suppressed and that ND messages are not received.
run_cmd "ip -n h2 link set dev eth0.$vid down"
run_cmd "ip -n $h2 link set dev eth0.$vid down"
log_test $? 0 "H2 down"
run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr -w 5000 $daddr eth0.$vid"
run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr -w 5000 $daddr eth0.$vid"
log_test $? 2 "ndisc6"
tc_check_packets sw1 "dev vx0 egress" 101 5
tc_check_packets $sw1 "dev vx0 egress" 101 5
log_test $? 0 "NS suppression"
}
......@@ -524,118 +517,118 @@ neigh_vlan_suppress_arp()
echo "Per-{Port, VLAN} ARP suppression"
echo "--------------------------------"
run_cmd "tc -n sw1 qdisc replace dev vx0 clsact"
run_cmd "tc -n sw1 filter replace dev vx0 egress pref 1 handle 101 proto 0x0806 flower indev swp1 arp_tip $tip1 arp_sip $sip1 arp_op request action pass"
run_cmd "tc -n sw1 filter replace dev vx0 egress pref 1 handle 102 proto 0x0806 flower indev swp1 arp_tip $tip2 arp_sip $sip2 arp_op request action pass"
run_cmd "tc -n $sw1 qdisc replace dev vx0 clsact"
run_cmd "tc -n $sw1 filter replace dev vx0 egress pref 1 handle 101 proto 0x0806 flower indev swp1 arp_tip $tip1 arp_sip $sip1 arp_op request action pass"
run_cmd "tc -n $sw1 filter replace dev vx0 egress pref 1 handle 102 proto 0x0806 flower indev swp1 arp_tip $tip2 arp_sip $sip2 arp_op request action pass"
h2_mac1=$(ip -n h2 -j -p link show eth0.$vid1 | jq -r '.[]["address"]')
h2_mac2=$(ip -n h2 -j -p link show eth0.$vid2 | jq -r '.[]["address"]')
run_cmd "bridge -n sw1 fdb replace $h2_mac1 dev vx0 master static vlan $vid1"
run_cmd "bridge -n sw1 fdb replace $h2_mac2 dev vx0 master static vlan $vid2"
run_cmd "ip -n sw1 neigh replace $tip1 lladdr $h2_mac1 nud permanent dev br0.$vid1"
run_cmd "ip -n sw1 neigh replace $tip2 lladdr $h2_mac2 nud permanent dev br0.$vid2"
h2_mac1=$(ip -n $h2 -j -p link show eth0.$vid1 | jq -r '.[]["address"]')
h2_mac2=$(ip -n $h2 -j -p link show eth0.$vid2 | jq -r '.[]["address"]')
run_cmd "bridge -n $sw1 fdb replace $h2_mac1 dev vx0 master static vlan $vid1"
run_cmd "bridge -n $sw1 fdb replace $h2_mac2 dev vx0 master static vlan $vid2"
run_cmd "ip -n $sw1 neigh replace $tip1 lladdr $h2_mac1 nud permanent dev br0.$vid1"
run_cmd "ip -n $sw1 neigh replace $tip2 lladdr $h2_mac2 nud permanent dev br0.$vid2"
# Enable per-{Port, VLAN} neighbor suppression and check that ARP
# requests are not suppressed and that ARP replies are received.
run_cmd "bridge -n sw1 link set dev vx0 neigh_vlan_suppress on"
run_cmd "bridge -n sw1 -d link show dev vx0 | grep \"neigh_vlan_suppress on\""
run_cmd "bridge -n $sw1 link set dev vx0 neigh_vlan_suppress on"
run_cmd "bridge -n $sw1 -d link show dev vx0 | grep \"neigh_vlan_suppress on\""
log_test $? 0 "\"neigh_vlan_suppress\" is on"
run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip1 -I eth0.$vid1 $tip1"
run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip1 -I eth0.$vid1 $tip1"
log_test $? 0 "arping (VLAN $vid1)"
run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip2 -I eth0.$vid2 $tip2"
run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip2 -I eth0.$vid2 $tip2"
log_test $? 0 "arping (VLAN $vid2)"
tc_check_packets sw1 "dev vx0 egress" 101 1
tc_check_packets $sw1 "dev vx0 egress" 101 1
log_test $? 0 "ARP suppression (VLAN $vid1)"
tc_check_packets sw1 "dev vx0 egress" 102 1
tc_check_packets $sw1 "dev vx0 egress" 102 1
log_test $? 0 "ARP suppression (VLAN $vid2)"
# Enable neighbor suppression on VLAN 10 and check that only on this
# VLAN ARP requests are suppressed.
run_cmd "bridge -n sw1 vlan set vid $vid1 dev vx0 neigh_suppress on"
run_cmd "bridge -n sw1 -d vlan show dev vx0 vid $vid1 | grep \"neigh_suppress on\""
run_cmd "bridge -n $sw1 vlan set vid $vid1 dev vx0 neigh_suppress on"
run_cmd "bridge -n $sw1 -d vlan show dev vx0 vid $vid1 | grep \"neigh_suppress on\""
log_test $? 0 "\"neigh_suppress\" is on (VLAN $vid1)"
run_cmd "bridge -n sw1 -d vlan show dev vx0 vid $vid2 | grep \"neigh_suppress off\""
run_cmd "bridge -n $sw1 -d vlan show dev vx0 vid $vid2 | grep \"neigh_suppress off\""
log_test $? 0 "\"neigh_suppress\" is off (VLAN $vid2)"
run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip1 -I eth0.$vid1 $tip1"
run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip1 -I eth0.$vid1 $tip1"
log_test $? 0 "arping (VLAN $vid1)"
run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip2 -I eth0.$vid2 $tip2"
run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip2 -I eth0.$vid2 $tip2"
log_test $? 0 "arping (VLAN $vid2)"
tc_check_packets sw1 "dev vx0 egress" 101 1
tc_check_packets $sw1 "dev vx0 egress" 101 1
log_test $? 0 "ARP suppression (VLAN $vid1)"
tc_check_packets sw1 "dev vx0 egress" 102 2
tc_check_packets $sw1 "dev vx0 egress" 102 2
log_test $? 0 "ARP suppression (VLAN $vid2)"
# Enable neighbor suppression on the port and check that it has no
# effect compared to previous state.
run_cmd "bridge -n sw1 link set dev vx0 neigh_suppress on"
run_cmd "bridge -n sw1 -d link show dev vx0 | grep \"neigh_suppress on\""
run_cmd "bridge -n $sw1 link set dev vx0 neigh_suppress on"
run_cmd "bridge -n $sw1 -d link show dev vx0 | grep \"neigh_suppress on\""
log_test $? 0 "\"neigh_suppress\" is on"
run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip1 -I eth0.$vid1 $tip1"
run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip1 -I eth0.$vid1 $tip1"
log_test $? 0 "arping (VLAN $vid1)"
run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip2 -I eth0.$vid2 $tip2"
run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip2 -I eth0.$vid2 $tip2"
log_test $? 0 "arping (VLAN $vid2)"
tc_check_packets sw1 "dev vx0 egress" 101 1
tc_check_packets $sw1 "dev vx0 egress" 101 1
log_test $? 0 "ARP suppression (VLAN $vid1)"
tc_check_packets sw1 "dev vx0 egress" 102 3
tc_check_packets $sw1 "dev vx0 egress" 102 3
log_test $? 0 "ARP suppression (VLAN $vid2)"
# Disable neighbor suppression on the port and check that it has no
# effect compared to previous state.
run_cmd "bridge -n sw1 link set dev vx0 neigh_suppress off"
run_cmd "bridge -n sw1 -d link show dev vx0 | grep \"neigh_suppress off\""
run_cmd "bridge -n $sw1 link set dev vx0 neigh_suppress off"
run_cmd "bridge -n $sw1 -d link show dev vx0 | grep \"neigh_suppress off\""
log_test $? 0 "\"neigh_suppress\" is off"
run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip1 -I eth0.$vid1 $tip1"
run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip1 -I eth0.$vid1 $tip1"
log_test $? 0 "arping (VLAN $vid1)"
run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip2 -I eth0.$vid2 $tip2"
run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip2 -I eth0.$vid2 $tip2"
log_test $? 0 "arping (VLAN $vid2)"
tc_check_packets sw1 "dev vx0 egress" 101 1
tc_check_packets $sw1 "dev vx0 egress" 101 1
log_test $? 0 "ARP suppression (VLAN $vid1)"
tc_check_packets sw1 "dev vx0 egress" 102 4
tc_check_packets $sw1 "dev vx0 egress" 102 4
log_test $? 0 "ARP suppression (VLAN $vid2)"
# Disable neighbor suppression on VLAN 10 and check that ARP requests
# are no longer suppressed on this VLAN.
run_cmd "bridge -n sw1 vlan set vid $vid1 dev vx0 neigh_suppress off"
run_cmd "bridge -n sw1 -d vlan show dev vx0 vid $vid1 | grep \"neigh_suppress off\""
run_cmd "bridge -n $sw1 vlan set vid $vid1 dev vx0 neigh_suppress off"
run_cmd "bridge -n $sw1 -d vlan show dev vx0 vid $vid1 | grep \"neigh_suppress off\""
log_test $? 0 "\"neigh_suppress\" is off (VLAN $vid1)"
run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip1 -I eth0.$vid1 $tip1"
run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip1 -I eth0.$vid1 $tip1"
log_test $? 0 "arping (VLAN $vid1)"
run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip2 -I eth0.$vid2 $tip2"
run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip2 -I eth0.$vid2 $tip2"
log_test $? 0 "arping (VLAN $vid2)"
tc_check_packets sw1 "dev vx0 egress" 101 2
tc_check_packets $sw1 "dev vx0 egress" 101 2
log_test $? 0 "ARP suppression (VLAN $vid1)"
tc_check_packets sw1 "dev vx0 egress" 102 5
tc_check_packets $sw1 "dev vx0 egress" 102 5
log_test $? 0 "ARP suppression (VLAN $vid2)"
# Disable per-{Port, VLAN} neighbor suppression, enable neighbor
# suppression on the port and check that on both VLANs ARP requests are
# suppressed.
run_cmd "bridge -n sw1 link set dev vx0 neigh_vlan_suppress off"
run_cmd "bridge -n sw1 -d link show dev vx0 | grep \"neigh_vlan_suppress off\""
run_cmd "bridge -n $sw1 link set dev vx0 neigh_vlan_suppress off"
run_cmd "bridge -n $sw1 -d link show dev vx0 | grep \"neigh_vlan_suppress off\""
log_test $? 0 "\"neigh_vlan_suppress\" is off"
run_cmd "bridge -n sw1 link set dev vx0 neigh_suppress on"
run_cmd "bridge -n sw1 -d link show dev vx0 | grep \"neigh_suppress on\""
run_cmd "bridge -n $sw1 link set dev vx0 neigh_suppress on"
run_cmd "bridge -n $sw1 -d link show dev vx0 | grep \"neigh_suppress on\""
log_test $? 0 "\"neigh_suppress\" is on"
run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip1 -I eth0.$vid1 $tip1"
run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip1 -I eth0.$vid1 $tip1"
log_test $? 0 "arping (VLAN $vid1)"
run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip2 -I eth0.$vid2 $tip2"
run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip2 -I eth0.$vid2 $tip2"
log_test $? 0 "arping (VLAN $vid2)"
tc_check_packets sw1 "dev vx0 egress" 101 2
tc_check_packets $sw1 "dev vx0 egress" 101 2
log_test $? 0 "ARP suppression (VLAN $vid1)"
tc_check_packets sw1 "dev vx0 egress" 102 5
tc_check_packets $sw1 "dev vx0 egress" 102 5
log_test $? 0 "ARP suppression (VLAN $vid2)"
}
......@@ -655,118 +648,118 @@ neigh_vlan_suppress_ns()
echo "Per-{Port, VLAN} NS suppression"
echo "-------------------------------"
run_cmd "tc -n sw1 qdisc replace dev vx0 clsact"
run_cmd "tc -n sw1 filter replace dev vx0 egress pref 1 handle 101 proto ipv6 flower indev swp1 ip_proto icmpv6 dst_ip $maddr src_ip $saddr1 type 135 code 0 action pass"
run_cmd "tc -n sw1 filter replace dev vx0 egress pref 1 handle 102 proto ipv6 flower indev swp1 ip_proto icmpv6 dst_ip $maddr src_ip $saddr2 type 135 code 0 action pass"
run_cmd "tc -n $sw1 qdisc replace dev vx0 clsact"
run_cmd "tc -n $sw1 filter replace dev vx0 egress pref 1 handle 101 proto ipv6 flower indev swp1 ip_proto icmpv6 dst_ip $maddr src_ip $saddr1 type 135 code 0 action pass"
run_cmd "tc -n $sw1 filter replace dev vx0 egress pref 1 handle 102 proto ipv6 flower indev swp1 ip_proto icmpv6 dst_ip $maddr src_ip $saddr2 type 135 code 0 action pass"
h2_mac1=$(ip -n h2 -j -p link show eth0.$vid1 | jq -r '.[]["address"]')
h2_mac2=$(ip -n h2 -j -p link show eth0.$vid2 | jq -r '.[]["address"]')
run_cmd "bridge -n sw1 fdb replace $h2_mac1 dev vx0 master static vlan $vid1"
run_cmd "bridge -n sw1 fdb replace $h2_mac2 dev vx0 master static vlan $vid2"
run_cmd "ip -n sw1 neigh replace $daddr1 lladdr $h2_mac1 nud permanent dev br0.$vid1"
run_cmd "ip -n sw1 neigh replace $daddr2 lladdr $h2_mac2 nud permanent dev br0.$vid2"
h2_mac1=$(ip -n $h2 -j -p link show eth0.$vid1 | jq -r '.[]["address"]')
h2_mac2=$(ip -n $h2 -j -p link show eth0.$vid2 | jq -r '.[]["address"]')
run_cmd "bridge -n $sw1 fdb replace $h2_mac1 dev vx0 master static vlan $vid1"
run_cmd "bridge -n $sw1 fdb replace $h2_mac2 dev vx0 master static vlan $vid2"
run_cmd "ip -n $sw1 neigh replace $daddr1 lladdr $h2_mac1 nud permanent dev br0.$vid1"
run_cmd "ip -n $sw1 neigh replace $daddr2 lladdr $h2_mac2 nud permanent dev br0.$vid2"
# Enable per-{Port, VLAN} neighbor suppression and check that NS
# messages are not suppressed and that ND messages are received.
run_cmd "bridge -n sw1 link set dev vx0 neigh_vlan_suppress on"
run_cmd "bridge -n sw1 -d link show dev vx0 | grep \"neigh_vlan_suppress on\""
run_cmd "bridge -n $sw1 link set dev vx0 neigh_vlan_suppress on"
run_cmd "bridge -n $sw1 -d link show dev vx0 | grep \"neigh_vlan_suppress on\""
log_test $? 0 "\"neigh_vlan_suppress\" is on"
run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr1 -w 5000 $daddr1 eth0.$vid1"
run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr1 -w 5000 $daddr1 eth0.$vid1"
log_test $? 0 "ndisc6 (VLAN $vid1)"
run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr2 -w 5000 $daddr2 eth0.$vid2"
run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr2 -w 5000 $daddr2 eth0.$vid2"
log_test $? 0 "ndisc6 (VLAN $vid2)"
tc_check_packets sw1 "dev vx0 egress" 101 1
tc_check_packets $sw1 "dev vx0 egress" 101 1
log_test $? 0 "NS suppression (VLAN $vid1)"
tc_check_packets sw1 "dev vx0 egress" 102 1
tc_check_packets $sw1 "dev vx0 egress" 102 1
log_test $? 0 "NS suppression (VLAN $vid2)"
# Enable neighbor suppression on VLAN 10 and check that only on this
# VLAN NS messages are suppressed.
run_cmd "bridge -n sw1 vlan set vid $vid1 dev vx0 neigh_suppress on"
run_cmd "bridge -n sw1 -d vlan show dev vx0 vid $vid1 | grep \"neigh_suppress on\""
run_cmd "bridge -n $sw1 vlan set vid $vid1 dev vx0 neigh_suppress on"
run_cmd "bridge -n $sw1 -d vlan show dev vx0 vid $vid1 | grep \"neigh_suppress on\""
log_test $? 0 "\"neigh_suppress\" is on (VLAN $vid1)"
run_cmd "bridge -n sw1 -d vlan show dev vx0 vid $vid2 | grep \"neigh_suppress off\""
run_cmd "bridge -n $sw1 -d vlan show dev vx0 vid $vid2 | grep \"neigh_suppress off\""
log_test $? 0 "\"neigh_suppress\" is off (VLAN $vid2)"
run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr1 -w 5000 $daddr1 eth0.$vid1"
run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr1 -w 5000 $daddr1 eth0.$vid1"
log_test $? 0 "ndisc6 (VLAN $vid1)"
run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr2 -w 5000 $daddr2 eth0.$vid2"
run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr2 -w 5000 $daddr2 eth0.$vid2"
log_test $? 0 "ndisc6 (VLAN $vid2)"
tc_check_packets sw1 "dev vx0 egress" 101 1
tc_check_packets $sw1 "dev vx0 egress" 101 1
log_test $? 0 "NS suppression (VLAN $vid1)"
tc_check_packets sw1 "dev vx0 egress" 102 2
tc_check_packets $sw1 "dev vx0 egress" 102 2
log_test $? 0 "NS suppression (VLAN $vid2)"
# Enable neighbor suppression on the port and check that it has no
# effect compared to previous state.
run_cmd "bridge -n sw1 link set dev vx0 neigh_suppress on"
run_cmd "bridge -n sw1 -d link show dev vx0 | grep \"neigh_suppress on\""
run_cmd "bridge -n $sw1 link set dev vx0 neigh_suppress on"
run_cmd "bridge -n $sw1 -d link show dev vx0 | grep \"neigh_suppress on\""
log_test $? 0 "\"neigh_suppress\" is on"
run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr1 -w 5000 $daddr1 eth0.$vid1"
run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr1 -w 5000 $daddr1 eth0.$vid1"
log_test $? 0 "ndisc6 (VLAN $vid1)"
run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr2 -w 5000 $daddr2 eth0.$vid2"
run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr2 -w 5000 $daddr2 eth0.$vid2"
log_test $? 0 "ndisc6 (VLAN $vid2)"
tc_check_packets sw1 "dev vx0 egress" 101 1
tc_check_packets $sw1 "dev vx0 egress" 101 1
log_test $? 0 "NS suppression (VLAN $vid1)"
tc_check_packets sw1 "dev vx0 egress" 102 3
tc_check_packets $sw1 "dev vx0 egress" 102 3
log_test $? 0 "NS suppression (VLAN $vid2)"
# Disable neighbor suppression on the port and check that it has no
# effect compared to previous state.
run_cmd "bridge -n sw1 link set dev vx0 neigh_suppress off"
run_cmd "bridge -n sw1 -d link show dev vx0 | grep \"neigh_suppress off\""
run_cmd "bridge -n $sw1 link set dev vx0 neigh_suppress off"
run_cmd "bridge -n $sw1 -d link show dev vx0 | grep \"neigh_suppress off\""
log_test $? 0 "\"neigh_suppress\" is off"
run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr1 -w 5000 $daddr1 eth0.$vid1"
run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr1 -w 5000 $daddr1 eth0.$vid1"
log_test $? 0 "ndisc6 (VLAN $vid1)"
run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr2 -w 5000 $daddr2 eth0.$vid2"
run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr2 -w 5000 $daddr2 eth0.$vid2"
log_test $? 0 "ndisc6 (VLAN $vid2)"
tc_check_packets sw1 "dev vx0 egress" 101 1
tc_check_packets $sw1 "dev vx0 egress" 101 1
log_test $? 0 "NS suppression (VLAN $vid1)"
tc_check_packets sw1 "dev vx0 egress" 102 4
tc_check_packets $sw1 "dev vx0 egress" 102 4
log_test $? 0 "NS suppression (VLAN $vid2)"
# Disable neighbor suppression on VLAN 10 and check that NS messages
# are no longer suppressed on this VLAN.
run_cmd "bridge -n sw1 vlan set vid $vid1 dev vx0 neigh_suppress off"
run_cmd "bridge -n sw1 -d vlan show dev vx0 vid $vid1 | grep \"neigh_suppress off\""
run_cmd "bridge -n $sw1 vlan set vid $vid1 dev vx0 neigh_suppress off"
run_cmd "bridge -n $sw1 -d vlan show dev vx0 vid $vid1 | grep \"neigh_suppress off\""
log_test $? 0 "\"neigh_suppress\" is off (VLAN $vid1)"
run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr1 -w 5000 $daddr1 eth0.$vid1"
run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr1 -w 5000 $daddr1 eth0.$vid1"
log_test $? 0 "ndisc6 (VLAN $vid1)"
run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr2 -w 5000 $daddr2 eth0.$vid2"
run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr2 -w 5000 $daddr2 eth0.$vid2"
log_test $? 0 "ndisc6 (VLAN $vid2)"
tc_check_packets sw1 "dev vx0 egress" 101 2
tc_check_packets $sw1 "dev vx0 egress" 101 2
log_test $? 0 "NS suppression (VLAN $vid1)"
tc_check_packets sw1 "dev vx0 egress" 102 5
tc_check_packets $sw1 "dev vx0 egress" 102 5
log_test $? 0 "NS suppression (VLAN $vid2)"
# Disable per-{Port, VLAN} neighbor suppression, enable neighbor
# suppression on the port and check that on both VLANs NS messages are
# suppressed.
run_cmd "bridge -n sw1 link set dev vx0 neigh_vlan_suppress off"
run_cmd "bridge -n sw1 -d link show dev vx0 | grep \"neigh_vlan_suppress off\""
run_cmd "bridge -n $sw1 link set dev vx0 neigh_vlan_suppress off"
run_cmd "bridge -n $sw1 -d link show dev vx0 | grep \"neigh_vlan_suppress off\""
log_test $? 0 "\"neigh_vlan_suppress\" is off"
run_cmd "bridge -n sw1 link set dev vx0 neigh_suppress on"
run_cmd "bridge -n sw1 -d link show dev vx0 | grep \"neigh_suppress on\""
run_cmd "bridge -n $sw1 link set dev vx0 neigh_suppress on"
run_cmd "bridge -n $sw1 -d link show dev vx0 | grep \"neigh_suppress on\""
log_test $? 0 "\"neigh_suppress\" is on"
run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr1 -w 5000 $daddr1 eth0.$vid1"
run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr1 -w 5000 $daddr1 eth0.$vid1"
log_test $? 0 "ndisc6 (VLAN $vid1)"
run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr2 -w 5000 $daddr2 eth0.$vid2"
run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr2 -w 5000 $daddr2 eth0.$vid2"
log_test $? 0 "ndisc6 (VLAN $vid2)"
tc_check_packets sw1 "dev vx0 egress" 101 2
tc_check_packets $sw1 "dev vx0 egress" 101 2
log_test $? 0 "NS suppression (VLAN $vid1)"
tc_check_packets sw1 "dev vx0 egress" 102 5
tc_check_packets $sw1 "dev vx0 egress" 102 5
log_test $? 0 "NS suppression (VLAN $vid2)"
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment