PCI: pciehp: cleanup register and field definitions

Clean up register definitions related to PCI Express Hot plug.

  - Add register definitions into include/linux/pci_regs.h, and use
    them instead of pciehp's locally definied register definitions.
  - Remove pciehp's locally defined register definitions
  - Remove unused register definitions in pciehp.
  - Some minor cleanups.
Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>

include/linux/pci_regs.h

@@ -411,20 +411,70 @@
 #define  PCI_EXP_DEVSTA_AUXPD	0x10	/* AUX Power Detected */
 #define  PCI_EXP_DEVSTA_TRPND	0x20	/* Transactions Pending */
 #define PCI_EXP_LNKCAP		12	/* Link Capabilities */
-#define  PCI_EXP_LNKCAP_ASPMS	0xc00	/* ASPM Support */
-#define  PCI_EXP_LNKCAP_L0SEL	0x7000	/* L0s Exit Latency */
-#define  PCI_EXP_LNKCAP_L1EL	0x38000	/* L1 Exit Latency */
-#define  PCI_EXP_LNKCAP_CLKPM	0x40000	/* L1 Clock Power Management */
+#define  PCI_EXP_LNKCAP_SLS	0x0000000f /* Supported Link Speeds */
+#define  PCI_EXP_LNKCAP_MLW	0x000003f0 /* Maximum Link Width */
+#define  PCI_EXP_LNKCAP_ASPMS	0x00000c00 /* ASPM Support */
+#define  PCI_EXP_LNKCAP_L0SEL	0x00007000 /* L0s Exit Latency */
+#define  PCI_EXP_LNKCAP_L1EL	0x00038000 /* L1 Exit Latency */
+#define  PCI_EXP_LNKCAP_CLKPM	0x00040000 /* L1 Clock Power Management */
+#define  PCI_EXP_LNKCAP_SDERC	0x00080000 /* Suprise Down Error Reporting Capable */
+#define  PCI_EXP_LNKCAP_DLLLARC	0x00100000 /* Data Link Layer Link Active Reporting Capable */
+#define  PCI_EXP_LNKCAP_LBNC	0x00200000 /* Link Bandwidth Notification Capability */
+#define  PCI_EXP_LNKCAP_PN	0xff000000 /* Port Number */
 #define PCI_EXP_LNKCTL		16	/* Link Control */
-#define  PCI_EXP_LNKCTL_RL	0x20	/* Retrain Link */
-#define  PCI_EXP_LNKCTL_CCC	0x40	/* Common Clock COnfiguration */
+#define  PCI_EXP_LNKCTL_ASPMC	0x0003	/* ASPM Control */
+#define  PCI_EXP_LNKCTL_RCB	0x0008	/* Read Completion Boundary */
+#define  PCI_EXP_LNKCTL_LD	0x0010	/* Link Disable */
+#define  PCI_EXP_LNKCTL_RL	0x0020	/* Retrain Link */
+#define  PCI_EXP_LNKCTL_CCC	0x0040	/* Common Clock Configuration */
+#define  PCI_EXP_LNKCTL_ES	0x0080	/* Extended Synch */
 #define  PCI_EXP_LNKCTL_CLKREQ_EN 0x100	/* Enable clkreq */
+#define  PCI_EXP_LNKCTL_HAWD	0x0200	/* Hardware Autonomous Width Disable */
+#define  PCI_EXP_LNKCTL_LBMIE	0x0400	/* Link Bandwidth Management Interrupt Enable */
+#define  PCI_EXP_LNKCTL_LABIE	0x0800	/* Lnk Autonomous Bandwidth Interrupt Enable */
 #define PCI_EXP_LNKSTA		18	/* Link Status */
-#define  PCI_EXP_LNKSTA_LT	0x800	/* Link Training */
+#define  PCI_EXP_LNKSTA_CLS	0x000f	/* Current Link Speed */
+#define  PCI_EXP_LNKSTA_NLW	0x03f0	/* Nogotiated Link Width */
+#define  PCI_EXP_LNKSTA_LT	0x0800	/* Link Training */
 #define  PCI_EXP_LNKSTA_SLC	0x1000	/* Slot Clock Configuration */
+#define  PCI_EXP_LNKSTA_DLLLA	0x2000	/* Data Link Layer Link Active */
+#define  PCI_EXP_LNKSTA_LBMS	0x4000	/* Link Bandwidth Management Status */
+#define  PCI_EXP_LNKSTA_LABS	0x8000	/* Link Autonomous Bandwidth Status */
 #define PCI_EXP_SLTCAP		20	/* Slot Capabilities */
+#define  PCI_EXP_SLTCAP_ABP	0x00000001 /* Attention Button Present */
+#define  PCI_EXP_SLTCAP_PCP	0x00000002 /* Power Controller Present */
+#define  PCI_EXP_SLTCAP_MRLSP	0x00000004 /* MRL Sensor Present */
+#define  PCI_EXP_SLTCAP_AIP	0x00000008 /* Attention Indicator Present */
+#define  PCI_EXP_SLTCAP_PIP	0x00000010 /* Power Indicator Present */
+#define  PCI_EXP_SLTCAP_HPS	0x00000020 /* Hot-Plug Surprise */
+#define  PCI_EXP_SLTCAP_HPC	0x00000040 /* Hot-Plug Capable */
+#define  PCI_EXP_SLTCAP_SPLV	0x00007f80 /* Slot Power Limit Value */
+#define  PCI_EXP_SLTCAP_SPLS	0x00018000 /* Slot Power Limit Scale */
+#define  PCI_EXP_SLTCAP_EIP	0x00020000 /* Electromechanical Interlock Present */
+#define  PCI_EXP_SLTCAP_NCCS	0x00040000 /* No Command Completed Support */
+#define  PCI_EXP_SLTCAP_PSN	0xfff80000 /* Physical Slot Number */
 #define PCI_EXP_SLTCTL		24	/* Slot Control */
+#define  PCI_EXP_SLTCTL_ABPE	0x0001	/* Attention Button Pressed Enable */
+#define  PCI_EXP_SLTCTL_PFDE	0x0002	/* Power Fault Detected Enable */
+#define  PCI_EXP_SLTCTL_MRLSCE	0x0004	/* MRL Sensor Changed Enable */
+#define  PCI_EXP_SLTCTL_PDCE	0x0008	/* Presence Detect Changed Enable */
+#define  PCI_EXP_SLTCTL_CCIE	0x0010	/* Command Completed Interrupt Enable */
+#define  PCI_EXP_SLTCTL_HPIE	0x0020	/* Hot-Plug Interrupt Enable */
+#define  PCI_EXP_SLTCTL_AIC	0x00c0	/* Attention Indicator Control */
+#define  PCI_EXP_SLTCTL_PIC	0x0300	/* Power Indicator Control */
+#define  PCI_EXP_SLTCTL_PCC	0x0400	/* Power Controller Control */
+#define  PCI_EXP_SLTCTL_EIC	0x0800	/* Electromechanical Interlock Control */
+#define  PCI_EXP_SLTCTL_DLLSCE	0x1000	/* Data Link Layer State Changed Enable */
 #define PCI_EXP_SLTSTA		26	/* Slot Status */
+#define  PCI_EXP_SLTSTA_ABP	0x0001	/* Attention Button Pressed */
+#define  PCI_EXP_SLTSTA_PFD	0x0002	/* Power Fault Detected */
+#define  PCI_EXP_SLTSTA_MRLSC	0x0004	/* MRL Sensor Changed */
+#define  PCI_EXP_SLTSTA_PDC	0x0008	/* Presence Detect Changed */
+#define  PCI_EXP_SLTSTA_CC	0x0010	/* Command Completed */
+#define  PCI_EXP_SLTSTA_MRLSS	0x0020	/* MRL Sensor State */
+#define  PCI_EXP_SLTSTA_PDS	0x0040	/* Presence Detect State */
+#define  PCI_EXP_SLTSTA_EIS	0x0080	/* Electromechanical Interlock Status */
+#define  PCI_EXP_SLTSTA_DLLSC	0x0100	/* Data Link Layer State Changed */
 #define PCI_EXP_RTCTL		28	/* Root Control */
 #define  PCI_EXP_RTCTL_SECEE	0x01	/* System Error on Correctable Error */
 #define  PCI_EXP_RTCTL_SENFEE	0x02	/* System Error on Non-Fatal Error */