ice: Implement support for SMA and U.FL on E810-T

Expose SMA and U.FL connectors as ptp_pins on E810-T based adapters and
allow controlling them.

E810-T adapters are equipped with:
- 2 external bidirectional SMA connectors
- 1 internal TX U.FL
- 1 internal RX U.FL

U.FL connectors share signal lines with the SMA connectors. The TX U.FL1
share the line with the SMA1 and the RX U.FL2 share line with the SMA2.
This dependence is controlled by the ice_verify_pin_e810t.

Additionally add support for the E810-T-based  devices which don't use the
SMA/U.FL controller. If the IO expander is not detected don't expose pins
and use 2 predefined 1PPS input and output pins.
Signed-off-by: Maciej Machnikowski <maciej.machnikowski@intel.com>
Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

drivers/net/ethernet/intel/ice/ice.h

@@ -163,6 +163,7 @@
 
 enum ice_feature {
 	ICE_F_DSCP,
+	ICE_F_SMA_CTRL,
 	ICE_F_MAX
 };
 

drivers/net/ethernet/intel/ice/ice_lib.c

@@ -3649,6 +3649,19 @@ static void ice_set_feature_support(struct ice_pf *pf, enum ice_feature f)
 	set_bit(f, pf->features);
 }
 
+/**
+ * ice_clear_feature_support
+ * @pf: pointer to the struct ice_pf instance
+ * @f: feature enum to clear
+ */
+void ice_clear_feature_support(struct ice_pf *pf, enum ice_feature f)
+{
+	if (f < 0 || f >= ICE_F_MAX)
+		return;
+
+	clear_bit(f, pf->features);
+}
+
 /**
  * ice_init_feature_support
  * @pf: pointer to the struct ice_pf instance
@@ -3662,6 +3675,8 @@ void ice_init_feature_support(struct ice_pf *pf)
 	case ICE_DEV_ID_E810C_QSFP:
 	case ICE_DEV_ID_E810C_SFP:
 		ice_set_feature_support(pf, ICE_F_DSCP);
+		if (ice_is_e810t(&pf->hw))
+			ice_set_feature_support(pf, ICE_F_SMA_CTRL);
 		break;
 	default:
 		break;

drivers/net/ethernet/intel/ice/ice_lib.h

@@ -129,5 +129,6 @@ void ice_vsi_ctx_set_allow_override(struct ice_vsi_ctx *ctx);
 void ice_vsi_ctx_clear_allow_override(struct ice_vsi_ctx *ctx);
 
 bool ice_is_feature_supported(struct ice_pf *pf, enum ice_feature f);
+void ice_clear_feature_support(struct ice_pf *pf, enum ice_feature f);
 void ice_init_feature_support(struct ice_pf *pf);
 #endif /* !_ICE_LIB_H_ */

drivers/net/ethernet/intel/ice/ice_ptp.c

@@ -6,6 +6,252 @@
 
 #define E810_OUT_PROP_DELAY_NS 1
 
+static const struct ptp_pin_desc ice_pin_desc_e810t[] = {
+	/* name    idx   func         chan */
+	{ "GNSS",  GNSS, PTP_PF_EXTTS, 0, { 0, } },
+	{ "SMA1",  SMA1, PTP_PF_NONE, 1, { 0, } },
+	{ "U.FL1", UFL1, PTP_PF_NONE, 1, { 0, } },
+	{ "SMA2",  SMA2, PTP_PF_NONE, 2, { 0, } },
+	{ "U.FL2", UFL2, PTP_PF_NONE, 2, { 0, } },
+};
+
+/**
+ * ice_get_sma_config_e810t
+ * @hw: pointer to the hw struct
+ * @ptp_pins: pointer to the ptp_pin_desc struture
+ *
+ * Read the configuration of the SMA control logic and put it into the
+ * ptp_pin_desc structure
+ */
+static int
+ice_get_sma_config_e810t(struct ice_hw *hw, struct ptp_pin_desc *ptp_pins)
+{
+	u8 data, i;
+	int status;
+
+	/* Read initial pin state */
+	status = ice_read_sma_ctrl_e810t(hw, &data);
+	if (status)
+		return status;
+
+	/* initialize with defaults */
+	for (i = 0; i < NUM_PTP_PINS_E810T; i++) {
+		snprintf(ptp_pins[i].name, sizeof(ptp_pins[i].name),
+			 "%s", ice_pin_desc_e810t[i].name);
+		ptp_pins[i].index = ice_pin_desc_e810t[i].index;
+		ptp_pins[i].func = ice_pin_desc_e810t[i].func;
+		ptp_pins[i].chan = ice_pin_desc_e810t[i].chan;
+	}
+
+	/* Parse SMA1/UFL1 */
+	switch (data & ICE_SMA1_MASK_E810T) {
+	case ICE_SMA1_MASK_E810T:
+	default:
+		ptp_pins[SMA1].func = PTP_PF_NONE;
+		ptp_pins[UFL1].func = PTP_PF_NONE;
+		break;
+	case ICE_SMA1_DIR_EN_E810T:
+		ptp_pins[SMA1].func = PTP_PF_PEROUT;
+		ptp_pins[UFL1].func = PTP_PF_NONE;
+		break;
+	case ICE_SMA1_TX_EN_E810T:
+		ptp_pins[SMA1].func = PTP_PF_EXTTS;
+		ptp_pins[UFL1].func = PTP_PF_NONE;
+		break;
+	case 0:
+		ptp_pins[SMA1].func = PTP_PF_EXTTS;
+		ptp_pins[UFL1].func = PTP_PF_PEROUT;
+		break;
+	}
+
+	/* Parse SMA2/UFL2 */
+	switch (data & ICE_SMA2_MASK_E810T) {
+	case ICE_SMA2_MASK_E810T:
+	default:
+		ptp_pins[SMA2].func = PTP_PF_NONE;
+		ptp_pins[UFL2].func = PTP_PF_NONE;
+		break;
+	case (ICE_SMA2_TX_EN_E810T | ICE_SMA2_UFL2_RX_DIS_E810T):
+		ptp_pins[SMA2].func = PTP_PF_EXTTS;
+		ptp_pins[UFL2].func = PTP_PF_NONE;
+		break;
+	case (ICE_SMA2_DIR_EN_E810T | ICE_SMA2_UFL2_RX_DIS_E810T):
+		ptp_pins[SMA2].func = PTP_PF_PEROUT;
+		ptp_pins[UFL2].func = PTP_PF_NONE;
+		break;
+	case (ICE_SMA2_DIR_EN_E810T | ICE_SMA2_TX_EN_E810T):
+		ptp_pins[SMA2].func = PTP_PF_NONE;
+		ptp_pins[UFL2].func = PTP_PF_EXTTS;
+		break;
+	case ICE_SMA2_DIR_EN_E810T:
+		ptp_pins[SMA2].func = PTP_PF_PEROUT;
+		ptp_pins[UFL2].func = PTP_PF_EXTTS;
+		break;
+	}
+
+	return 0;
+}
+
+/**
+ * ice_ptp_set_sma_config_e810t
+ * @hw: pointer to the hw struct
+ * @ptp_pins: pointer to the ptp_pin_desc struture
+ *
+ * Set the configuration of the SMA control logic based on the configuration in
+ * num_pins parameter
+ */
+static int
+ice_ptp_set_sma_config_e810t(struct ice_hw *hw,
+			     const struct ptp_pin_desc *ptp_pins)
+{
+	int status;
+	u8 data;
+
+	/* SMA1 and UFL1 cannot be set to TX at the same time */
+	if (ptp_pins[SMA1].func == PTP_PF_PEROUT &&
+	    ptp_pins[UFL1].func == PTP_PF_PEROUT)
+		return -EINVAL;
+
+	/* SMA2 and UFL2 cannot be set to RX at the same time */
+	if (ptp_pins[SMA2].func == PTP_PF_EXTTS &&
+	    ptp_pins[UFL2].func == PTP_PF_EXTTS)
+		return -EINVAL;
+
+	/* Read initial pin state value */
+	status = ice_read_sma_ctrl_e810t(hw, &data);
+	if (status)
+		return status;
+
+	/* Set the right sate based on the desired configuration */
+	data &= ~ICE_SMA1_MASK_E810T;
+	if (ptp_pins[SMA1].func == PTP_PF_NONE &&
+	    ptp_pins[UFL1].func == PTP_PF_NONE) {
+		dev_info(ice_hw_to_dev(hw), "SMA1 + U.FL1 disabled");
+		data |= ICE_SMA1_MASK_E810T;
+	} else if (ptp_pins[SMA1].func == PTP_PF_EXTTS &&
+		   ptp_pins[UFL1].func == PTP_PF_NONE) {
+		dev_info(ice_hw_to_dev(hw), "SMA1 RX");
+		data |= ICE_SMA1_TX_EN_E810T;
+	} else if (ptp_pins[SMA1].func == PTP_PF_NONE &&
+		   ptp_pins[UFL1].func == PTP_PF_PEROUT) {
+		/* U.FL 1 TX will always enable SMA 1 RX */
+		dev_info(ice_hw_to_dev(hw), "SMA1 RX + U.FL1 TX");
+	} else if (ptp_pins[SMA1].func == PTP_PF_EXTTS &&
+		   ptp_pins[UFL1].func == PTP_PF_PEROUT) {
+		dev_info(ice_hw_to_dev(hw), "SMA1 RX + U.FL1 TX");
+	} else if (ptp_pins[SMA1].func == PTP_PF_PEROUT &&
+		   ptp_pins[UFL1].func == PTP_PF_NONE) {
+		dev_info(ice_hw_to_dev(hw), "SMA1 TX");
+		data |= ICE_SMA1_DIR_EN_E810T;
+	}
+
+	data &= ~ICE_SMA2_MASK_E810T;
+	if (ptp_pins[SMA2].func == PTP_PF_NONE &&
+	    ptp_pins[UFL2].func == PTP_PF_NONE) {
+		dev_info(ice_hw_to_dev(hw), "SMA2 + U.FL2 disabled");
+		data |= ICE_SMA2_MASK_E810T;
+	} else if (ptp_pins[SMA2].func == PTP_PF_EXTTS &&
+			ptp_pins[UFL2].func == PTP_PF_NONE) {
+		dev_info(ice_hw_to_dev(hw), "SMA2 RX");
+		data |= (ICE_SMA2_TX_EN_E810T |
+			 ICE_SMA2_UFL2_RX_DIS_E810T);
+	} else if (ptp_pins[SMA2].func == PTP_PF_NONE &&
+		   ptp_pins[UFL2].func == PTP_PF_EXTTS) {
+		dev_info(ice_hw_to_dev(hw), "UFL2 RX");
+		data |= (ICE_SMA2_DIR_EN_E810T | ICE_SMA2_TX_EN_E810T);
+	} else if (ptp_pins[SMA2].func == PTP_PF_PEROUT &&
+		   ptp_pins[UFL2].func == PTP_PF_NONE) {
+		dev_info(ice_hw_to_dev(hw), "SMA2 TX");
+		data |= (ICE_SMA2_DIR_EN_E810T |
+			 ICE_SMA2_UFL2_RX_DIS_E810T);
+	} else if (ptp_pins[SMA2].func == PTP_PF_PEROUT &&
+		   ptp_pins[UFL2].func == PTP_PF_EXTTS) {
+		dev_info(ice_hw_to_dev(hw), "SMA2 TX + U.FL2 RX");
+		data |= ICE_SMA2_DIR_EN_E810T;
+	}
+
+	return ice_write_sma_ctrl_e810t(hw, data);
+}
+
+/**
+ * ice_ptp_set_sma_e810t
+ * @info: the driver's PTP info structure
+ * @pin: pin index in kernel structure
+ * @func: Pin function to be set (PTP_PF_NONE, PTP_PF_EXTTS or PTP_PF_PEROUT)
+ *
+ * Set the configuration of a single SMA pin
+ */
+static int
+ice_ptp_set_sma_e810t(struct ptp_clock_info *info, unsigned int pin,
+		      enum ptp_pin_function func)
+{
+	struct ptp_pin_desc ptp_pins[NUM_PTP_PINS_E810T];
+	struct ice_pf *pf = ptp_info_to_pf(info);
+	struct ice_hw *hw = &pf->hw;
+	int err;
+
+	if (pin < SMA1 || func > PTP_PF_PEROUT)
+		return -EOPNOTSUPP;
+
+	err = ice_get_sma_config_e810t(hw, ptp_pins);
+	if (err)
+		return err;
+
+	/* Disable the same function on the other pin sharing the channel */
+	if (pin == SMA1 && ptp_pins[UFL1].func == func)
+		ptp_pins[UFL1].func = PTP_PF_NONE;
+	if (pin == UFL1 && ptp_pins[SMA1].func == func)
+		ptp_pins[SMA1].func = PTP_PF_NONE;
+
+	if (pin == SMA2 && ptp_pins[UFL2].func == func)
+		ptp_pins[UFL2].func = PTP_PF_NONE;
+	if (pin == UFL2 && ptp_pins[SMA2].func == func)
+		ptp_pins[SMA2].func = PTP_PF_NONE;
+
+	/* Set up new pin function in the temp table */
+	ptp_pins[pin].func = func;
+
+	return ice_ptp_set_sma_config_e810t(hw, ptp_pins);
+}
+
+/**
+ * ice_verify_pin_e810t
+ * @info: the driver's PTP info structure
+ * @pin: Pin index
+ * @func: Assigned function
+ * @chan: Assigned channel
+ *
+ * Verify if pin supports requested pin function. If the Check pins consistency.
+ * Reconfigure the SMA logic attached to the given pin to enable its
+ * desired functionality
+ */
+static int
+ice_verify_pin_e810t(struct ptp_clock_info *info, unsigned int pin,
+		     enum ptp_pin_function func, unsigned int chan)
+{
+	/* Don't allow channel reassignment */
+	if (chan != ice_pin_desc_e810t[pin].chan)
+		return -EOPNOTSUPP;
+
+	/* Check if functions are properly assigned */
+	switch (func) {
+	case PTP_PF_NONE:
+		break;
+	case PTP_PF_EXTTS:
+		if (pin == UFL1)
+			return -EOPNOTSUPP;
+		break;
+	case PTP_PF_PEROUT:
+		if (pin == UFL2 || pin == GNSS)
+			return -EOPNOTSUPP;
+		break;
+	case PTP_PF_PHYSYNC:
+		return -EOPNOTSUPP;
+	}
+
+	return ice_ptp_set_sma_e810t(info, pin, func);
+}
+
 /**
  * ice_set_tx_tstamp - Enable or disable Tx timestamping
  * @pf: The PF pointer to search in
@@ -735,17 +981,34 @@ ice_ptp_gpio_enable_e810(struct ptp_clock_info *info,
 {
 	struct ice_pf *pf = ptp_info_to_pf(info);
 	struct ice_perout_channel clk_cfg = {0};
+	bool sma_pres = false;
 	unsigned int chan;
 	u32 gpio_pin;
 	int err;
 
+	if (ice_is_feature_supported(pf, ICE_F_SMA_CTRL))
+		sma_pres = true;
+
 	switch (rq->type) {
 	case PTP_CLK_REQ_PEROUT:
 		chan = rq->perout.index;
-		if (chan == PPS_CLK_GEN_CHAN)
-			clk_cfg.gpio_pin = PPS_PIN_INDEX;
+		if (sma_pres) {
+			if (chan == ice_pin_desc_e810t[SMA1].chan)
+				clk_cfg.gpio_pin = GPIO_20;
+			else if (chan == ice_pin_desc_e810t[SMA2].chan)
+				clk_cfg.gpio_pin = GPIO_22;
+			else
+				return -1;
+		} else if (ice_is_e810t(&pf->hw)) {
+			if (chan == 0)
+				clk_cfg.gpio_pin = GPIO_20;
 			else
+				clk_cfg.gpio_pin = GPIO_22;
+		} else if (chan == PPS_CLK_GEN_CHAN) {
+			clk_cfg.gpio_pin = PPS_PIN_INDEX;
+		} else {
 			clk_cfg.gpio_pin = chan;
+		}
 
 		clk_cfg.period = ((rq->perout.period.sec * NSEC_PER_SEC) +
 				   rq->perout.period.nsec);
@@ -757,7 +1020,19 @@ ice_ptp_gpio_enable_e810(struct ptp_clock_info *info,
 		break;
 	case PTP_CLK_REQ_EXTTS:
 		chan = rq->extts.index;
+		if (sma_pres) {
+			if (chan < ice_pin_desc_e810t[SMA2].chan)
+				gpio_pin = GPIO_21;
+			else
+				gpio_pin = GPIO_23;
+		} else if (ice_is_e810t(&pf->hw)) {
+			if (chan == 0)
+				gpio_pin = GPIO_21;
+			else
+				gpio_pin = GPIO_23;
+		} else {
 			gpio_pin = chan;
+		}
 
 		err = ice_ptp_cfg_extts(pf, !!on, chan, gpio_pin,
 					rq->extts.flags);
@@ -1037,14 +1312,94 @@ ice_ptp_rx_hwtstamp(struct ice_ring *rx_ring,
 	}
 }
 
+/**
+ * ice_ptp_disable_sma_pins_e810t - Disable E810-T SMA pins
+ * @pf: pointer to the PF structure
+ * @info: PTP clock info structure
+ *
+ * Disable the OS access to the SMA pins. Called to clear out the OS
+ * indications of pin support when we fail to setup the E810-T SMA control
+ * register.
+ */
+static void
+ice_ptp_disable_sma_pins_e810t(struct ice_pf *pf, struct ptp_clock_info *info)
+{
+	struct device *dev = ice_pf_to_dev(pf);
+
+	dev_warn(dev, "Failed to configure E810-T SMA pin control\n");
+
+	info->enable = NULL;
+	info->verify = NULL;
+	info->n_pins = 0;
+	info->n_ext_ts = 0;
+	info->n_per_out = 0;
+}
+
+/**
+ * ice_ptp_setup_sma_pins_e810t - Setup the SMA pins
+ * @pf: pointer to the PF structure
+ * @info: PTP clock info structure
+ *
+ * Finish setting up the SMA pins by allocating pin_config, and setting it up
+ * according to the current status of the SMA. On failure, disable all of the
+ * extended SMA pin support.
+ */
+static void
+ice_ptp_setup_sma_pins_e810t(struct ice_pf *pf, struct ptp_clock_info *info)
+{
+	struct device *dev = ice_pf_to_dev(pf);
+	int err;
+
+	/* Allocate memory for kernel pins interface */
+	info->pin_config = devm_kcalloc(dev, info->n_pins,
+					sizeof(*info->pin_config), GFP_KERNEL);
+	if (!info->pin_config) {
+		ice_ptp_disable_sma_pins_e810t(pf, info);
+		return;
+	}
+
+	/* Read current SMA status */
+	err = ice_get_sma_config_e810t(&pf->hw, info->pin_config);
+	if (err)
+		ice_ptp_disable_sma_pins_e810t(pf, info);
+}
+
+/**
+ * ice_ptp_setup_pins_e810t - Setup PTP pins in sysfs
+ * @pf: pointer to the PF instance
+ * @info: PTP clock capabilities
+ */
+static void
+ice_ptp_setup_pins_e810t(struct ice_pf *pf, struct ptp_clock_info *info)
+{
+	/* Check if SMA controller is in the netlist */
+	if (ice_is_feature_supported(pf, ICE_F_SMA_CTRL) &&
+	    !ice_is_pca9575_present(&pf->hw))
+		ice_clear_feature_support(pf, ICE_F_SMA_CTRL);
+
+	if (!ice_is_feature_supported(pf, ICE_F_SMA_CTRL)) {
+		info->n_ext_ts = N_EXT_TS_E810_NO_SMA;
+		info->n_per_out = N_PER_OUT_E810T_NO_SMA;
+		return;
+	}
+
+	info->n_per_out = N_PER_OUT_E810T;
+	info->n_ext_ts = N_EXT_TS_E810;
+	info->n_pins = NUM_PTP_PINS_E810T;
+	info->verify = ice_verify_pin_e810t;
+
+	/* Complete setup of the SMA pins */
+	ice_ptp_setup_sma_pins_e810t(pf, info);
+}
+
 /**
  * ice_ptp_setup_pins_e810 - Setup PTP pins in sysfs
  * @info: PTP clock capabilities
  */
 static void ice_ptp_setup_pins_e810(struct ptp_clock_info *info)
 {
-	info->n_per_out = E810_N_PER_OUT;
-	info->n_ext_ts = E810_N_EXT_TS;
+	info->n_per_out = N_PER_OUT_E810;
+	info->n_ext_ts = N_EXT_TS_E810;
 }
 
 /**
@@ -1062,6 +1417,9 @@ ice_ptp_set_funcs_e810(struct ice_pf *pf, struct ptp_clock_info *info)
 {
 	info->enable = ice_ptp_gpio_enable_e810;
 
+	if (ice_is_e810t(&pf->hw))
+		ice_ptp_setup_pins_e810t(pf, info);
+	else
 		ice_ptp_setup_pins_e810(info);
 }
 

drivers/net/ethernet/intel/ice/ice_ptp.h

@@ -9,12 +9,21 @@
 
 #include "ice_ptp_hw.h"
 
-enum ice_ptp_pin {
+enum ice_ptp_pin_e810 {
 	GPIO_20 = 0,
 	GPIO_21,
 	GPIO_22,
 	GPIO_23,
-	NUM_ICE_PTP_PIN
+	NUM_PTP_PIN_E810
+};
+
+enum ice_ptp_pin_e810t {
+	GNSS = 0,
+	SMA1,
+	UFL1,
+	SMA2,
+	UFL2,
+	NUM_PTP_PINS_E810T
 };
 
 struct ice_perout_channel {
@@ -155,8 +164,11 @@ struct ice_ptp {
 #define PPS_CLK_SRC_CHAN		2
 #define PPS_PIN_INDEX			5
 #define TIME_SYNC_PIN_INDEX		4
-#define E810_N_EXT_TS			3
-#define E810_N_PER_OUT			4
+#define N_EXT_TS_E810			3
+#define N_PER_OUT_E810			4
+#define N_PER_OUT_E810T			3
+#define N_PER_OUT_E810T_NO_SMA		2
+#define N_EXT_TS_E810_NO_SMA		2
 
 #if IS_ENABLED(CONFIG_PTP_1588_CLOCK)
 struct ice_pf;