staging: rtl8723au: Make direct calls for HW_VAR_H2C_FW_{PWRMODE,JOINBSSRPT}

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/rtl8723au/core/rtw_cmd.c

@@ -1269,8 +1269,7 @@ void lps_ctrl_wk_hdl(struct rtw_adapter *padapter, u8 lps_ctrl_type)
 			mstatus = 1;/* connect */
 			/*  Reset LPS Setting */
 			padapter->pwrctrlpriv.LpsIdleCount = 0;
-			rtw_hal_set_hwreg23a(padapter, HW_VAR_H2C_FW_JOINBSSRPT,
-					     (u8 *)&mstatus);
+			rtl8723a_set_FwJoinBssReport_cmd(padapter, 1);
 #ifdef CONFIG_8723AU_BT_COEXIST
 			BT_WifiMediaStatusNotify(padapter, mstatus);
 #endif
@@ -1284,8 +1283,7 @@ void lps_ctrl_wk_hdl(struct rtw_adapter *padapter, u8 lps_ctrl_type)
 			{
 				LPS_Leave23a(padapter);
 			}
-			rtw_hal_set_hwreg23a(padapter, HW_VAR_H2C_FW_JOINBSSRPT,
-					     (u8 *)&mstatus);
+			rtl8723a_set_FwJoinBssReport_cmd(padapter, 0);
 			break;
 		case LPS_CTRL_SPECIAL_PACKET:
 			pwrpriv->DelayLPSLastTimeStamp = jiffies;

drivers/staging/rtl8723au/core/rtw_p2p.c

@@ -16,6 +16,7 @@
 
 #include <drv_types.h>
 #include <rtw_p2p.h>
+#include <rtl8723a_cmd.h>
 #include <wifi.h>
 
 #ifdef CONFIG_8723AU_P2P
@@ -3573,12 +3574,10 @@ void p2p_ps_wk_hdl23a(struct rtw_adapter *padapter, u8 p2p_ps_state)
 			pwdinfo->opp_ps = 0;
 			pwdinfo->noa_num = 0;
 			pwdinfo->p2p_ps_mode = P2P_PS_NONE;
-			if (padapter->pwrctrlpriv.bFwCurrentInPSMode == true)
-			{
-				if (pwrpriv->smart_ps == 0)
-				{
+			if (padapter->pwrctrlpriv.bFwCurrentInPSMode == true) {
+				if (pwrpriv->smart_ps == 0) {
 					pwrpriv->smart_ps = 2;
-					rtw_hal_set_hwreg23a(padapter, HW_VAR_H2C_FW_PWRMODE, (u8 *)&padapter->pwrctrlpriv.pwr_mode);
+					rtl8723a_set_FwPwrMode_cmd(padapter, padapter->pwrctrlpriv.pwr_mode);
 				}
 			}
 			break;
@@ -3586,13 +3585,11 @@ void p2p_ps_wk_hdl23a(struct rtw_adapter *padapter, u8 p2p_ps_state)
 			if (pwdinfo->p2p_ps_mode > P2P_PS_NONE) {
 				pwdinfo->p2p_ps_state = p2p_ps_state;
 
-				if (pwdinfo->ctwindow > 0)
-				{
-					if (pwrpriv->smart_ps != 0)
-					{
+				if (pwdinfo->ctwindow > 0) {
+					if (pwrpriv->smart_ps != 0) {
 						pwrpriv->smart_ps = 0;
 						DBG_8723A("%s(): Enter CTW, change SmartPS\n", __func__);
-						rtw_hal_set_hwreg23a(padapter, HW_VAR_H2C_FW_PWRMODE, (u8 *)&padapter->pwrctrlpriv.pwr_mode);
+						rtl8723a_set_FwPwrMode_cmd(padapter, padapter->pwrctrlpriv.pwr_mode);
 					}
 				}
 				rtw_hal_set_hwreg23a(padapter, HW_VAR_H2C_FW_P2P_PS_OFFLOAD, (u8 *)(&p2p_ps_state));

drivers/staging/rtl8723au/core/rtw_pwrctrl.c

@@ -341,25 +341,22 @@ void rtw_set_ps_mode23a(struct rtw_adapter *padapter, u8 ps_mode, u8 smart_ps, u
 
 			pwrpriv->pwr_mode = ps_mode;
 			rtw_set_rpwm23a(padapter, PS_STATE_S4);
-			rtw_hal_set_hwreg23a(padapter, HW_VAR_H2C_FW_PWRMODE, (u8 *)(&ps_mode));
+			rtl8723a_set_FwPwrMode_cmd(padapter, ps_mode);
 			pwrpriv->bFwCurrentInPSMode = false;
 		}
-	}
-	else
-	{
+	} else {
 		if (PS_RDY_CHECK(padapter)
 #ifdef CONFIG_8723AU_BT_COEXIST
 			|| (BT_1Ant(padapter) == true)
 #endif
-			)
-		{
+			) {
 			DBG_8723A("%s: Enter 802.11 power save\n", __func__);
 
 			pwrpriv->bFwCurrentInPSMode = true;
 			pwrpriv->pwr_mode = ps_mode;
 			pwrpriv->smart_ps = smart_ps;
 			pwrpriv->bcn_ant_mode = bcn_ant_mode;
-			rtw_hal_set_hwreg23a(padapter, HW_VAR_H2C_FW_PWRMODE, (u8 *)(&ps_mode));
+			rtl8723a_set_FwPwrMode_cmd(padapter, ps_mode);
 
 #ifdef CONFIG_8723AU_P2P
 			/*  Set CTWindow after LPS */
@@ -370,8 +367,6 @@ void rtw_set_ps_mode23a(struct rtw_adapter *padapter, u8 ps_mode, u8 smart_ps, u
 			rtw_set_rpwm23a(padapter, PS_STATE_S2);
 		}
 	}
-
-
 }
 
 /*

drivers/staging/rtl8723au/hal/rtl8723a_hal_init.c

@@ -3153,14 +3153,6 @@ void SetHwReg8723A(struct rtw_adapter *padapter, u8 variable, u8 *val)
 		rtl8723a_odm_support_ability_clr(padapter, *val32);
 		break;
 
-	case HW_VAR_H2C_FW_PWRMODE:
-		rtl8723a_set_FwPwrMode_cmd(padapter, *val);
-		break;
-
-	case HW_VAR_H2C_FW_JOINBSSRPT:
-		rtl8723a_set_FwJoinBssReport_cmd(padapter, *val);
-		break;
-
 #ifdef CONFIG_8723AU_P2P
 	case HW_VAR_H2C_FW_P2P_PS_OFFLOAD:
 		rtl8723a_set_p2p_ps_offload_cmd(padapter, *val);

drivers/staging/rtl8723au/include/hal_intf.h

@@ -45,8 +45,6 @@ enum HW_VARIABLES {
 	HW_VAR_DM_FUNC_CLR,
 	HW_VAR_CAM_READ,
 	HW_VAR_SET_RPWM,
-	HW_VAR_H2C_FW_PWRMODE,
-	HW_VAR_H2C_FW_JOINBSSRPT,
 	HW_VAR_FWLPS_RF_ON,
 	HW_VAR_H2C_FW_P2P_PS_OFFLOAD,
 	HW_VAR_TDLS_WRCR,